Items where Author is "Raja Abdullah, Raja Izamshah"
 | Up a level |
Article
Liew, Pay Jun and Othman, Intan Sharhida and Tee, Chee Yin and Chang, Siang Yee and Raja Abdullah, Raja Izamshah and Wang, Jingsi (2023) Electrical discharge coating of mild steel with fly ash suspension. Journal of Advanced Research in Applied Mechanics, 112 (1). pp. 1-9. ISSN 2289-7895
Kasim, Mohd Shahir and W. Mohamad, W Noor Fatihah and Raja Abdullah, Raja Izamshah and Mohamad, Noraiham and Rosnan, Hairulhisham and Sundi @ Suandi, Syahrul Azwan and Hassan, Muhammad Hafiz and Ito, Teruaki and Mat Kasa, Zamri (2021) Analysis of carbon fiber-reinforced polymer composites delamination during vibration assisted trimming using historical data design. Malaysian Journal On Composites Science And Manufacturing, 6 (1). pp. 1-13. ISSN 2716-6945
Kasim, Mohd Shahir and Husshini, Nur Husnina Najeah and Raja Abdullah, Raja Izamshah and Mohd Shahrim, Mohammad Shah All Hafiz and Omar, Ghazali and Ganesan, Hema Nanthini and Mohd Azam, Muhamad Ammar Farhan Maula and Mohd Nawi, Mohd Al Hafiz (2021) Statistical And Simulation Analysis On Dimple Configurations Performance Of Heat Dissipation. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 86 (2). pp. 74-90. ISSN 2289-7879
Liew, Pay Jun and Tay, Hock Seng and Yap, Ching Yee and Othman, Intan Sharhida and Raja Abdullah, Raja Izamshah (2021) Tribological Behaviour Of Palm Oil Mixed With Fly Ash Microparticles As A Bio-Based Lubricant For Manufacturing Processes. Jurnal Tribologi, 31. pp. 73-83. ISSN 2289-7232
Raja Abdullah, Raja Izamshah and Kasim, Mohd Shahir and Rosman, Muhammad Rafiq and Lamat, Arshad and Salleh, Mohd Shukor and Liew, Pay Jun and Abdul Aziz, Mohd Sanusi and Abdullah, R.S.A. (2021) Effects of cutter geometry and cutting parameters on machining Al/SiC Metal Matrix Composites (MMC). International Journal of Nanoelectronics and Materials, 14 (SI). pp. 343-352. ISSN 1985-5761
Raja Abdullah, Raja Izamshah and Kasim, Mohd Shahir and Lamat, Arshad and Rosman, Muhammad Rafiq and Kasman, Muhammad Zaki and Liew, Pay Jun and Abdul Aziz, Mohd Sanusi and Raja Abdullah, Raja Syamsul Azmir (2021) Quality Evaluation On Rotary Ultrasonic Assisted Drilling For Chemically Strengthened Glass. International Journal of Nanoelectronics and Materials, 14 (SI). pp. 353-362. ISSN 1985-5761
Kasim, Mohd Shahir and Husshini, Nur Husnina Najeah and Raja Abdullah, Raja Izamshah and Mohd Shahrim, Mohammad Shah All Hafiz and W. Mohamad, W Noor Fatihah and Md Ali, Mohd Amran and Abu Bakar, Mohd Hadzley (2021) Current Summary Of Surface Integrity When Machining Inconel 718 Under Different Cooling And Lubrication Strategies. Jurnal Tribologi, 29. pp. 144-155. ISSN 2289-7232
Md Nasir, Nur Syuhada and Ab Wahab, Norfariza and Sofian, Badri and Raja Abdullah, Raja Izamshah and Sasahara, Hiroyuki (2021) Experimental Investigations Towards Hole Accuracy In Micro-Drilling Of Carbon Fibre Reinforced Polymer Material. Manufacturing Technology, 21 (3). pp. 381-386. ISSN 1213-2489
Kasim, Mohd Shahir and Raja Abdullah, Raja Izamshah and Husshini, Nur Husnina Najeah and Mohammad Shah All Hafiz, Mohd Shahrim and W. Mohamad, W Noor Fatihah and Ghani, Jaharah Abdul and Haron, Che Hassan (2021) Particulate Matter-Monitoring During End-Milling Under Different Cooling-Lubrication Strategies. Journal of Applied Science and Engineering, 24 (6). pp. 891-900. ISSN 2708-9967
Kasim, Mohd Shahir and Raja Abdullah, Raja Izamshah and Mohd Hassan, Nur Alya Syaherah and W. Mohamad, W Noor Fatihah and Mohd Shahrim, Mohammad Shah All Hafiz and Mohd Nawi, Mohd Aliff (2021) The effect of an overweight backpack towards comfortability and L5S1 among primary school student. Malaysian Journal of Ergonomics, 3 (1). pp. 1-13. ISSN 2773-501X
Salleh, Mohd Shukor and Jaafar, Mohd Fairuz and Raja Abdullah, Raja Izamshah and Yahaya, Saifudin Hafiz and Hassan, M.H. and Al-Zubaidi, S.S. (2020) Influence Of Point And Helix Angle On Thrust Force And Delamination For One-Shot Drilling Of Carbon Fiber Reinforced Plastic (CFRP). Journal of Advanced Manufacturing Technology (JAMT), 14 (2). pp. 15-28. ISSN 1985-3157
Sundi, Syahrul Azwan and Raja Abdullah, Raja Izamshah and Kasim, Mohd Shahir and Jaafar, Mohd Fairuz and S. Ding, S. Ding (2020) Statistical Analysis On The Effect Of Machining Conditions Towards Surface Finish During Edge Trimming Of Carbon Fiber Reinforced Plastics (CFRP). International Journal of Nanoelectronics and Materials, 13 (SI). pp. 199-209. ISSN 2232-1535
Sundi, Syahrul Azwan and Raja Abdullah, Raja Izamshah and Kasim, Mohd Shahir (2020) Effect Of Machining Parameters On Surface Roughness In Edge Trimming Of Carbon Fiber Reinforced Plastics (CFRP). Tribology Online, 15 (2). pp. 53-59. ISSN 1881-2198
Mohd Abid, Mohd Asyadi 'Azam and Raja Seman, Raja Noor Amalina and Abdul Aziz, Mohd Fareezuan and Raja Abdullah, Raja Izamshah and Kasim, Mohd Shahir (2020) Electrochemical Performance Of Molybdenum Disulfide Supercapacitor Electrode In Potassium Hydroxide And Sodium Sulfate Electrolytes. International Journal of Recent Technology and Engineering, 8 (6). pp. 5499-5503. ISSN 2277-3878
Kasim, Mohd Shahir and Mohd Shahrim, Mohammad Shah All Hafiz and W. Mohamad, W Noor Fatihah and Mohd Zainurin, Nurul Shafiqah and Othman, Intan Sharhida and Raja Abdullah, Raja Izamshah and Mat Harttar, Maziati Akmal and Mohamed, S.B. and Nawi, M.A.M. (2019) The Effects Of Dry And Chilled Air On Tool Wear Behavior During Face Milling Of Inconel 718. Jurnal Tribologi, 21. pp. 47-62. ISSN 2289-7232
Kasim, Mohd Shahir and Mohd Shahrim, Mohammad Shah All Hafiz and Raja Abdullah, Raja Izamshah and W. Mohamad, W Noor Fatihah and Abdullah, Abu and Jaafar, Mohd Fairuz (2019) An Assessment For A New Approach To Pulsating Lubrication Strategy (PLS) In End Milling. The International Journal of Advanced Manufacturing Technology, 105. pp. 3157-3163. ISSN 0268-3768
Kasim, Mohd Shahir and Mohd Nasir, Faarih Farhan and A Ghani, Jaharah and Raja Abdullah, Raja Izamshah and Mohd Shahrim, Mohammad Shah All Hafiz and Wong, Pui Kei and Yusof, Ahmad Anas and Mohamad, W Noor Fatihah (2019) Analysis On Effect Of Ball Bladder Size During Water Hammer In Domestic Water System. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 61 (1). pp. 33-43. ISSN 2289-7879
Mizobuchi, Akira and Abdul Aziz, Mohd Sanusi and Kasim, Mohd Shahir and Mohamad, Effendi and Salleh, Mohd Rizal and Raja Abdullah, Raja Izamshah and Ishida, Tohru (2019) Helical Micro-Hole Drilling Of Chemically Strengthened Glass Using Capsule-Shaped Electroplated Diamond Tool. Journal of Advanced Manufacturing Technology, 13 (2). pp. 69-81. ISSN 1985-3157
Kasim, Mohd Shahir and Abdul Aziz, Mohd Sanusi and Mohd Shahrim, Mohammad Shah All-Hafiz and Wong, Pui Kei and Raja Abdullah, Raja Izamshah and W. Mohamad, W Noor Fatihah and Abdul Ghani, Jaharah and Haron, Che Hassan and Saedon, Juri (2019) Chip Morphology In Ball Nose End Milling Process Of Nickel Based Alloy Material Under MQL Condition. The International Journal of Advanced Manufacturing Technology, 102 (9-12). pp. 1-7. ISSN 0268-3768
Raja Abdullah, Raja Izamshah and Zakaria, Akmal and Mohd Shahir, Kasim and Ibrahim, Mohamad Halim (2019) Enhancing the Productivity of Wire Electrical Discharge Machining Toward Sustainable Production by using Artificial Neural Network Modelling. EMITTER International Journal of Engineering Technology, 7 (1). pp. 261-274. ISSN 2443-1168
Kasim, Mohd Shahir and Mohd Shahrim, Mohammad Shah All Hafiz and Ghani Abdul, Jaharah and Che Haron, Che Hassan and Raja Abdullah, Raja Izamshah and Sundi @ Suandi, Syahrul Azwan and Mohamed, Saiful Bahri and Othman, Intan Sharhida (2019) Investigation Of Surface Topology In Ball Nose End Milling Process Of Inconel 718. Wear, 426-42. pp. 1318-1326. ISSN 0043-1648
Salleh, Mohd Shukor and Jaafar, Mohd Fairuz and Raja Abdullah, Raja Izamshah and Hassan, Muhammad Hafiz and Sundi, Syahrul Azwan and Mohd Shahrim, Mohammad Shah All Hafiz and Kasim, Mohd Shahir (2019) Influence On Thrust Force And Delamination For One Shot Drilling Of Carbon Fibre Reinforced Plastic (CFRP). International Journal Of Mechanical And Mechatronics Engineering, 19 (1). pp. 43-56. ISSN 2227-2771
Raja Abdullah, Raja Izamshah and Ramli, Azlan and Kasim, Mohd Shahir and Mohd Zakaria, Muhammad Akmal and Ding, Song Lin (2019) Rotary ultrasonic assisted machining of mould and die material. Journal of Advanced Manufacturing Technology (JAMT), 13 (2(1)). pp. 1-14. ISSN 1985-3157
Abu Bakar, Mohd Hadzley and Abdul Manap, Muhamad Naim Fahmi and Tamin, Nor Fauzi and Azhar, Anis Afuza and Raja Abdullah, Raja Izamshah and Kasim, Mohd Shahir and Md Ali, Mohd Amran and Shamsudin, Noorazizi and Mohamad Raffi, Nurul Fatin (2019) Surface Integrity Study For FC300 Cast Iron Using TiAIN Ball End Mill. Jurnal Tribologi, 21. pp. 35-46. ISSN 2289-7232
Kasim, Mohd Shahir and Che Haron, Che Hassan and A Ghani, Jaharah and Raja Abdullah, Raja Izamshah and Akmal, Suriati and Md Ali, Mohd Amran and Abu Bakar, Mohd Hadzley and Salleh, Mohd Shukor (2018) Investigation Of Tangential Force On Ball Nose Rake Face During High-Speed Milling Of Inconel 718. Advances In Materials And Processing Technologies, 4 (3). pp. 1-7. ISSN 2374-0698
Ishak, Anuar and Mohamad, Effendi and Sukarma, Lukman and Salleh, Mohd Shukor and Salleh, Mohd Rizal and Mohamad, Noraiham and Raja Abdullah, Raja Izamshah and Md Ali, Mohd Amran (2018) Cleaner Production Implementation In An E-Waste Recovery Plant By Using The Value Stream Mapping. Journal Of Advanced Manufacturing Technology (JAMT) , 12 (1 (2)). pp. 55-67. ISSN 1985-3157 (Unpublished)
Raja Abdullah, Raja Izamshah and Mohd Zakaria, Muhammad Akmal and Kasim, Mohd Shahir and Mohamed, S.B. (2018) Experimental Analysis On Parameters Affecting The Material Removal Rate In Wire Electrical Discharge Turning Using The Taguchi Method. International Journal Of Mechanical & Mechatronics Engineering (IJMME), 18 (05). pp. 75-82. ISSN 2227-2771
Abu Bakar, Mohd Hadzley and Fahmi, Naim and Mokhtar, Faiz and Tamin, Nor Fauzi and Azlan, Umar Al-Amani and Adam, Abdul Aziz and Raja Abdullah, Raja Izamshah and Kasim, Mohd Shahir (2018) Fabrication And Machining Performance Of Powder Compacted Alumina Based Cutting Tool. MATEC Web Of Conferences, 150. pp. 1-5. ISSN 2261-236X
Liew, Pay Jun and Mohd Hajazi, Aini Syahida and Shaaroni, Ainusyafiqah and Sulaiman, Mohd Amri and Raja Abdullah, Raja Izamshah (2018) Investigation Of Effects Of Carbon Nanofiber Nanofluid In Drilling Of AISI 304 Stainless Steel. Journal Of Advanced Manufacturing Technology (JAMT) , 12 (1 (2)). pp. 491-500. ISSN 1985-3157
Harun, Nurul Hatiqah and Kasim, Mohd Shahir and Zainal Abidin, Muhammad Zaimi and Raja Abdullah, Raja Izamshah and Attan, Hassan and Ganesan, Hema Nanthini (2018) A Study On Surface Roughness During Fused Deposition Modelling: A Review. Journal Of Advanced Manufacturing Technology (JAMT) , 12 (1 (1)). pp. 25-35. ISSN 1985-3157
Mohamad, Noraiham and Abd Latiff, Anisah and Abd Manaf, Mohd Edeerozey and Ab Maulod, Hairul Effendy and Shueb, Mohammed Iqbal and Munawar, Rose Farahiyan and Raja Abdullah, Raja Izamshah and Kasim, Mohd Shahir and Mazlan, Mazliah and Abd Razak, Jeefferie and Mohd Abid, Mohd Asyadi Azam (2018) Wear Characteristics Of Recycled Carbon Fibre-Filled Polypropylene Composites Via Acidic Surface Treatment. World Review Of Science,Technology And Sust. Development, 14 (2/3). pp. 165-179. ISSN 1741-2234
Chan, Chee Hoong and Kasim, Mohd Shahir and Raja Abdullah, Raja Izamshah and Abu Bakar, Hamizan and Sundi, Syahrul Azwan and Zakaria, Kamarul Ariffin and Che Haron, Che Hassan and Abdul Ghani, Jaharah and Mohd Shahrim, Mohammad Shah All Hafiz (2017) Analysis Of Face Milling Performance On Inconel 718 Using FEM And Historical Data Of RSM. Materials Science And Engineering, 270 (1). pp. 1-11. ISSN 1757-8981
Md Ali, Mohd Amran and Abdul Aziz, Mohd Sanusi and Redzuwan, Bahrin Ikram and Muhammad Zaimi, Zainal Abidin and Raja Abdullah, Raja Izamshah and Kasim, Mohd Shahir and Mizobuchi, Akira and Ishida, Tohru (2017) Mechanical Properties And Cutting Performance Of Electroless Ternary Ni-W-P Coated Cutting Tools. Jurnal Teknologi , 79 (5-2). pp. 101-104. ISSN 2180-3722
Ali, Aidy and Subramonian, Sivarao and Md Ali, Mohd Amran and Dhar Malingam, Sivakumar and Salleh, Mohd Shukor and Raja Abdullah, Raja Izamshah (2016) Performance evaluation of reworked weld joints. International Journal of Engineering and Technologies, 9. pp. 5-12. ISSN 2297-623X
Ali, Aidy and Subramonian, Sivarao and Amran, Mohammad and Dhar Malingam, Sivakumar and Salleh, Mohd Shukor and Raja Abdullah, Raja Izamshah (2016) Effect of fiber loading on the mechanical properties of bagasse fiber–reinforced polypropylene composites. Advances in Mechanical Engineering, 8 (8). pp. 1-5. ISSN 1687-8132
Ali, Aidy and Subramonian, Sivarao and Amran, Mohammad and Dhar Malingam, Sivakumar and Salleh, Mohd Shukor and Raja Abdullah, Raja Izamshah (2016) Effect of fiber loading on the mechanical properties of bagasse fiber–reinforced polypropylene composites. Advances In Mechanical Engineering, 8 (8). pp. 1-5. ISSN 1687-8132
Subramonian, Sivarao and Kasim, Mohd Shahir and Md Ali, Mohd Amran and Raja Abdullah, Raja Izamshah and Anand, T Joseph Sahaya (2015) Micro-Drilling Of Silicon Wafer By Industrial CO2 Laser. International Journal of Mechanical and Materials Engineering , 10 (2). pp. 1-6. ISSN -
Raja Abdullah, Raja Izamshah and Yu, Aaron Lung and Mohamad, Effendi and Mohd Abid, Mohd Asyadi 'Azam and Sulaiman, Mohd Amri and Liew, Pay Jun and Abdul Aziz, Mohd Sanusi (2015) Optimization Of Milling Parameter For Untreated And Heat Treated Polyetheretherketones (PEEK) Biomaterials. Applied Mechanics And Materials, 761. pp. 293-297. ISSN 1662-7482
Md Ali, Mohd Amran and M., Faizal and Kasim, Mohd Shahir and Raja Abdullah, Raja Izamshah and Subramonian, Sivarao (2015) Product And Tooling Design Of Slanted Glass Injection Mould For Visualization Of Flow Molten Plastic. Jurnal Teknologi, 77 (21). pp. 9-18. ISSN 0127-9696
Raja Abdullah, Raja Izamshah and J.P.T. , Mo and S., Ding and A Rahman, Muhamad Arfauz and Mohd Abid, Mohd Asyadi Azam and Kasim, Mohd Shahir (2014) Effect Of Parameter Condition On Surface Roughness For Machining AISI D2 Hardened Tool Steel. Journal of Advanced Manufacturing Technology (JAMT) , 8 (1). pp. 47-56. ISSN 1985-3157
Kasim, Mohd Shahir and Raja Abdullah, Raja Izamshah and Md Ali, Mohd Amran and Abdul Aziz, Mohd Sanusi and Mohd Abid, Mohd Asyadi 'Azam and Che Haron, Che Hassan and A Ghani, Jaharah (2014) The Influence Of Cutting Parameter On Heat Generation In High-Speed Milling Inconel 718 Under MQL Condition. Journal of Scientific & Industrial Research (JSIR), 73 (1). pp. 62-65. ISSN 0975-1084 (Online); 0022-4456 (Print)
Raja Abdullah, Raja Izamshah and Hassan, Zulhairy and Kasim, Mohd Shahir and Abu Bakar, Mohd Hadzley and Md Ali, Mohd Amran and Sulaiman, Mohd Amri and Subramonian, Sivarao (2014) Cutter Path Strategies For Shoulder Milling Of Thin Deflecting Walls. Advanced Materials Research, 903 (-). pp. 175-180. ISSN 1662-8985
Bani Hashim, Ahmad Yusairi and Maslan, Mohd Nazmin and Raja Abdullah, Raja Izamshah and Mohamad, Imran Syakir (2014) Delivering key signals to the machine: seeking the electric signal that muscles emanate. Journal of Physics Conference Series, 546 (1). pp. 1-9. ISSN 1757-8981
Kasim, Mohd Shahir and Mohd Zahudi, Mohd Sufri and Che Haron, Che Hassan and A Ghani, Jaharah and Raja Abdullah, Raja Izamshah and Mohd Isa, Mohd Hanafiah and Saedon, Juri and Roni Sahroni, Taufik and Ito, Teruaki (2014) The Effect Of WEDM Cutting Parameter On Inconel 718 Subsurface Microhardness. Journal of Advanced Manufacturing Technology, 8 (2). pp. 51-59. ISSN 1985-3157
Raja Abdullah, Raja Izamshah and Mohd Nawawi, Nurul Husna and Abu Bakar, Mohd Hadzley and Md Ali, Mohd Amran and Kasim, Mohd Shahir and Sulaiman, Mohd Amri (2014) Effects Of Cutter Geometrical Features On Machining Polyetheretherketones (PEEK) Engineering Plastic. Journal of Mechanical Engineering and Sciences (JMES), 6 (-). pp. 863-872. ISSN 2289-4659
Abu Bakar, Mohd Hadzley and Ahmad, Siti Sarah Nadia and Raja Abdullah, Raja Izamshah and Md Ali, Mohd Amran and Kasim, Mohd Shahir and Sulaiman, Mohd Amri and Mohamad Raffi, Nurul Fatin (2014) Evaluation Of The Surface Integrity When Machining LM6 Aluminum Metal Matrix Composites Using Coated And Uncoated Carbide Cutting Tools. Applied Mechanics and Materials, 465-16 (-). pp. 1049-1053. ISSN 1660-9336
Kasim, Mohd Shahir and Che Haron, Che Hassan and A Ghani, Jaharah and Mohamad, Effendi and Raja Abdullah, Raja Izamshah and Md Ali, Mohd Amran and Saedon, Juri (2014) Multi-Objective Optimization Using Box-Behken Of Response Surface Methodology For High-Speed Machining Of Inconel 718. Applied Mechanics and Materials, 629 (-). pp. 487-492. ISSN 1660-9336
Kasim, Mohd Shahir and Che Haron, Che Hassan and A Ghani, Jaharah and Mohamad, Effendi and Raja Abdullah, Raja Izamshah and Md Ali, Mohd Amran and Saedon, Juri (2014) Multi-Objective Optimization Using Box-Behnken Of Response Surface Methodology For High-Speed Machining Of Inconel 718. Applied Mechanics and Materials, 629. pp. 487-492. ISSN 1662-7482
Kasim, Mohd Shahir and Raja Abdullah, Raja Izamshah and Minhat, Mohamad and Mohamad, Noraiham and Che Haron, Che Hassan and A Ghani, Jaharah and Saedon, Juri and Saad, Nor Hayati and Mohamed, Saiful Bahri (2014) Prediction Of Cutting Force In End Milling Of Inconel 718. Journal of Engineering and Technology (JET), 5 (2). pp. 63-70. ISSN 2180-3811
Mohamad, Effendi and T., Ito and D., Yuniawan and Ibrahim, Mohamad Amran and Saptari, Adi and Kasim, Mohd Shahir and Raja Abdullah, Raja Izamshah and Shibghatullah, Abdul Samad and Md Ali, Mohd Amran (2014) A Proposal Of Muda Indicator Agent To Estimate Lean Manufacturing Verification. Journal Of Advanced Manufacturing Technology, 8 (2). pp. 71-82. ISSN 1985-3157
Mohamad, Effendi and Ito, Teruaki and Yuniawan, Dani and Ibrahim, Mohamad Amran and Saptari, Adi and Kasim, Mohd Shahir and Raja Abdullah, Raja Izamshah and Shibghatullah, Abdul Samad and Md Ali, Mohd Amran (2014) A Proposal Of Muda Indicator Agent To Estimate Lean Manufacturing Verification. Journal of Advanced Manufacturing Technology (JAMT) , 8 (2). pp. 71-82. ISSN 1985-3157
Abu Bakar, Mohd Hadzley and Raja Abdullah, Raja Izamshah and Md Ali, Mohd Amran and Kasim, Mohd Shahir and Sulaiman, Mohd Amri and Ahmad, Siti Sarah Nadia and Mohamad Raffi, Nurul Fatin (2014) Surface Integrity Of LM6 Aluminum Metal Matrix Composite When Machined With High Speed Steel And Uncoated Carbide Cutting Tools. Journal of Mechanical Engineering and Sciences (JMES), 6 (-). pp. 854-862. ISSN 2289-4659
Abu Bakar, Mohd Hadzley and Raja Abdullah, Raja Izamshah and Md Ali, Mohd Amran and Yusoff, Wan Azahar and Wijeyesekera, Devapriya and Hasanah, Tuan Noor (2014) Surface Observation Of Hollow Tube Mat After Sintering And Cutting Process. International Symposium on Research in Innovation and Sustainability 2014, 26 (5). pp. 1895-1898. ISSN 1013-5316
Mohamad, Effendi and Ito, Teruaki and Yuniawan, Dani and Ibrahim, M. A. and Saptari, Adi and Kasim, Mohd Shahir and Raja Abdullah, Raja Izamshah and Shibghatullah, Abdul Samad and Md Ali, Mohd Amran (2014) A proposal of Muda Indicator agent to estimate Lean Manufacturing verification. Journal of Advanced Manufacturing Technology (JAMT) , 8 (2). pp. 71-82. ISSN 1985-3157
Raja Abdullah, Raja Izamshah and Yuhazri, Yaakob and Mohd , Hadzley and Mohd , amran and Sivarao, Subramonian (2013) Effects of End Mill Helix Angle on Accuracy for Machining Thin-Rib Aerospace Component. Applied Mechanics and Materials, 315. pp. 773-777. ISSN 1660-9336
Abu Bakar, Mohd Hadzley and Raja Abdullah, Raja Izamshah and Ahmad, Siti Sarah Madia and Mohamad Raffi, Nurul Fatin (2013) Finite Element Model of Machining with High Pressure Coolant for Ti- 6Al-4V alloy. Procedia Engineering, 53. pp. 624-631. ISSN 1877-7058
Abu Bakar, Mohd Hadzley and Raja Abdullah, Raja Izamshah and Md. Ali, Mohd Amran and Jusoff, Kamaruzzaman and Sivarao, Subramonian and Ariff, Hambali and Hussein, Nur Izan Syahriah and Wan Mahmood, Wan Hassrulnizzam and Abdullah, Abu and Yusoff, Marianna and Shamshiri, Meysam (2013) Machining Performance of Ti-6Al-4V Titanium Alloy Assisted by High Pressure Waterjet. World Applied Sciences Journal, 21. pp. 98-104. ISSN 1818-4952
Mohd Abid, Mohd Asyadi Azam and Mohamad, Noraiham and Raja Abdullah, Raja Izamshah (2013) Nanostructuring Ultra-thin Co Films to Active Catalyst Particles for Vertically Aligned Single-Walled CNT Growth. Procedia Engineering , 68. pp. 566-571. ISSN 1877-7058
Abu Bakar, Mohd Hadzley and Raja Abdullah, Raja Izamshah and Ahmad, Siti Sarah Nadia and Mohammad Raffi, Nurul Fatin (2012) Finite Element Model of Machining with High Pressure Coolant for Ti-6Al-4V alloy. Proceedings of Malaysian Technical Universities Conference on Engineering and Technology (MUCET) 2012. pp. 295-300. ISSN 978-967-5415-49-4
Book Chapter
Mohamad, Noraiham and Karim, Khairu Ilwani and Abd Razak, Jeefferie and Ab Maulod, Hairul Effendy and Mazlan, Mazliah and Mohd Abid, Mohd Asyadi Azam and Kasim, Mohd Shahir and Raja Abdullah, Raja Izamshah (2018) Swelling Effects Of NR/EPDM Filled Graphene Nanoplatelets (GNPs) In Different Type Of Service Oils For Engine Mounting. In: Proceedings of Mechanical Engineering Research Day 2018. Centre for Advanced Research on Energy (UTeM), Centre for Advanced Research on Energy, 2018, pp. 243-245. ISBN 9672145209, 9789672145202
Conference or Workshop Item
Mohamad, Noraiham and Abd Ghani, Anis Aqilah and Anen, Marvrick Anak and Abd Razak, Jeefferie and Raja Abdullah, Raja Izamshah and Mohd Ali, Mohd Amran and Ab Maulod, Hairul Effendy and Se, Sian Meng (2023) Optimization of recycled polypropylene concrete aggregates processing using water-assisted melt compounding via response surface methodology. In: Green Materials and Electronic Packaging Interconnect Technology Symposium, EPITS 2022, 14 September 2022 through 15 September 2022, Langkawi.
Md Ali, Mohd Amran and Raja Abdullah, Raja Izamshah and Hussein, Nur Izan Syahriah and Kasim, Mohd Shahir and Sulaiman, Mohd Amri and Salleh, Mohd Rizal and Mohamad, Effendi and Subramonian, Sivarao and Liew, Pay Jun and Abdullah, Zulkeflee (2014) Performance of wire-EDM parameters on machining characteristics of titanium alloy (Ti6Al4V) using Taguchi method. In: Malaysia University Conference Engineering Technology 2015, 10-11 November 2014, Melaka.
Md Ali, Mohd Amran and Mohd Sani, Siti Salmah and Raja Abdullah, Raja Izamshah and Abu Bakar, Md Ali and Sivarao, Subramonian and HUSSEIN, NUR IZAN SYAHRIAH and Hussain, Mohamad Zaki (2012) Optimization Parameters of Injection Moulding Machine For Reducing Warpage of Dog Bone Plastic Part. In: The 28th International Conference Of The Polymer Processing Society (PPS-28), 11-15 December, Pattaya.
Kasim, Mohd Shahir and S.A Faizal and Raja Abdullah, Raja Izamshah and Che Zainal Abidin, Nik Mohd Farid (2007) Hot Alignment Solution Using Spreadsheet Application. In: Conference On Application And Design In Mechanical Engineering, 25-26 Ocktober 2007, Perlis.
Patent
Raja Izamshah Raja Abdullah (2014) A plastic wall tile and method of manufacturing thereof. PI 2014703490.