Items where Author is "Syed Salim, Syed Najib"
Up a level |
Abdullah, Lokman and Kamaludin, Khairun Najmi and Syed Salim, Syed Najib and Rafan, Nur Aidawaty and Jamaludin, Zamberi and Rahmat, Mohd Fua'ad and Ramanathan, Rprakash (2023) Triple nonlinear hyperbolic PID with static friction compensation for precise positioning of a servo pneumatic actuator. IIUM Engineering Journal, Special Issue in Mechanical Engineering, 24 (2). pp. 315-336. ISSN 1511-788X
Jamil Alsayaydeh, Jamil Abedalrahim and Ahmad Idil, Abdul Rahman and Baharudin, Zikri Abadi and Wong, Adam Yoon Khang and Aziz, Azwan and Syed Salim, Syed Najib and Zainon, Maslan and Abbasi, Muhammad Inam (2021) Development Of Programmable Home Security Using GSM System For Early Prevention. ARPN Journal Of Engineering And Applied Sciences, 16 (1). pp. 88-97. ISSN 1819-6608
Syed Salim, Syed Najib and Jamian, Syamiza and Kamarudin, Muhammad Nizam and Zainon, Maslan and Mat Hanafiah, Mohd Ariff and Syed Mohamed, Muhammad Syafiq and Abdullah, Lokman (2020) Review On Controller Design In Pneumatic Actuator Drive System. Telkomnika (Telecommunication Computing Electronics and Control), 18 (1). pp. 332-342. ISSN 1693-6930
Indra, Win Adiyansyah and Saptari, Adi and Che Aziz, Siti Asma and Irianto and M.A., Wong and Syed Salim, Syed Najib (2020) A Handover Planning Optimization Technique For 5G Systems. Journal of Engineering and Applied Sciences, 15 (1). pp. 184-191. ISSN 1816-949X
Jamil Alsayaydeh, Jamil Abedalrahim and Syed Salim, Syed Najib and Wong, Adam Yoon Khang and Indra, Win Adiyansyah and Mohamed, Njikam and Pellipus, Christina and Shkarupylo, Vadym (2019) Homes Appliances Control Using Bluetooth. ARPN Journal of Engineering and Applied Sciences, 14 (19). pp. 3344-3357. ISSN 1819-6608
Syed Salim, Syed Najib and Rahmat, Mohd Fua’ad and Abdullah, Lokman and Shamsudin, Shamsul Anuar and Zainon, Maslan and Muhammad Amin, Ahmad Fairuz (2019) Enhanced Self-Regulation Nonlinear PID For Industrial Pneumatic Actuator. International Journal Of Electrical And Computer Engineering (IJECE), 9 (4). pp. 3015-3024. ISSN 2088-8708
Abdullah, Lokman and Anang, Nur Amira and Jamaludin, Zamberi and Chiew, Tsung Heng and Maharof, Madihah and Syed Salim, Syed Najib and Retas, Zain (2018) Analysis Of Nonlinear PID Controller For Tracking Performance Of Ball Screw Drive. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 10 (2-2). pp. 67-71. ISSN 2180-1843
Abdullah, Lokman and Anang, Nur Amira and Jamaludin, Zamberi and Chiew, Tsung Heng and Maharof, Madihah and Retas, Zain and Che Ku Junoh, Sahida and Syed Salim, Syed Najib (2017) Tracking Performance Of NPID Controller For Cutting Force Disturbance Of Ball Screw Drive. Journal of Mechanical Engineering and Sciences (JMES) , 11 (2). pp. 3227-3239. ISSN 2231-8380
Abdullah, Lokman and Anang, Nur Amira and Jamaludin, Zamberi and Retas, Zain and Chiew, Tsung Heng and Syed Salim, Syed Najib (2017) Precise Positioning Control Strategy Of Machine Tools: A Review. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 9 (3-2). pp. 11-15. ISSN 2180-1843
Zakaria, Shahrudin and Syed Salim, Syed Najib and Che Hasan, Mohd Hanif and Zainon, Maslan and Abd Razak, Norazlina (2017) Bio-Physics Concept For Camera Vision Hypothesis Of Colour White. International Journal Of Applied Engineering Research, 12 (7). pp. 1205-1208. ISSN 0973-4562
Tamjis, Mohamad Rom and Mat Hanafiah, Mohd Ariff and Ahmad Aizan, Zulkefle and Ibrahim, Mazree and Syed Salim, Syed Najib and Ab. Ghani, Mohd Ruddin and Ab.Rahman, Puteri Nur Suhaila and S. N. M. Shahril and Ahmed, Dawood Saleem and Mohamed Khairuddin, Mohamed Syafiq Akmal and Baharudin, Zikri Abadi and Abdul Rahman, Ahmad Idil and Zainon, Maslan and Abu Shah, Ismail and Mohd Ibrahim, Imran and Raja Abd Rahman, Raja Roslan and Wan Adnan, Wan Azizun (2016) Permeance based algorithm for computation of flux linkage characteristics of non-linear 6/4 Switched Reluctance Motor (SRM). ARPN Journal of Engineering and Applied Sciences, 11 (14). pp. 8897-8901. ISSN 1819-6608
Syed Salim, Syed Najib and Rahmat, Mohd Fua'ad and Mohd Faudzi, Ahmad 'athif and Zool Hilmi, Ismail (2014) Position control of pneumatic actuator using an enhancement of NPID controller based on the characteristic of rate variation nonlinear gain. The International Journal of Advanced Manufacturing Technology, 75 (1-4). pp. 181-195. ISSN 0268-3768
Syed Salim , Syed Najib and Mohd Fua'ad , Rahmat and Ahmad 'Athif, Mohd Faudzi and Zool Hilmi, Ismail and Noorhazirah, Sunar and Shamsul Anuar, Shamsudin (2014) Robust control strategy for pneumatic drive system via enhanced nonlinear PID controller. IJECE, 4 (5). pp. 658-667. ISSN 2088-8708
Syed Salim , Syed Najib and Mohd Fua'ad , Rahmat and Noorhazirah, Sunar and Ahmad 'Athif , Mohd Faudzi and Zool Hilmi, Ismail and Shamsul Anuar, Shamsudin (2014) Practical robust control using Self-regulation Nonlinear PID controller for pneumatic positioning system. In: Proceeding of International Conference on Electrical Engineering, Computer Science and Informatics (EECSI 2014), 20-21 August 2014, Yogyakarta, Indonesia.
Sharatul Izah, Sharatul Izah and Mohd Fua'ad , Rahmat and Norhaliza , Abdul Wahab and M.C, Razali and M.S. , Gaya and Syed Salim , Syed Najib (2014) Improvement of activated sludge process using enhanced nonlinear PI controller. Arab J Sci Eng, 39 (8). 6575-6586 . ISSN 1319-8025
Syed Salim , Syed Najib and Rahmat, Mohd Fua’ad and Mohd Faudzi, Ahmad ’Athif and Ismail, Zool H. and Sunar, Noorhazirah (2014) Position Control of Pneumatic Actuator Using Self-Regulation Nonlinear PID. Position Control of Pneumatic Actuator Using Self-Regulation Nonlinear PID. pp. 1-12. ISSN 1024-123X
Noorhazirah, Sunar and Mohd Fua'ad , Rahmat and Zool Hilmi, Ismail and Ahmad 'Athif , Mohd Faudzi and Syed Salim , Syed Najib (2014) Model Identification And Controller Design For An Electro-Pneumatic Actuator System With Dead Zone Compensation. INTERNATIONAL JOURNAL ON SMART SENSING AND INTELLIGENT SYSTEMS, 7 (2). pp. 798-817. ISSN 1178-5608
Syed Salim , Syed Najib and Rahmat, Mohd Fua'ad and Mohd Faudzi, Ahmad 'athif and Ismail, Zool H. and Sunar, Noorhazirah and Sharatul Izah, Sharatul Izah (2013) TRACKING PERFORMANCE AND DISTURBANCE REJECTION OF PNEUMATIC ACTUATOR SYSTEM. In: Control Conference (ASCC), 2013 9th Asian, 23-26 June 2013, Istanbul.
Mohd Fua'ad , Rahmat and Syed Salim , Syed Najib and Ahmad ‘Athif, Mohd Faudzi and Zool Hilmi, Ismail (2012) Identification And Non-Linear Control Strategy For Industrial Pneumatic Actuator. International Journal of the Physical Sciences, 7 (17). pp. 2565-2579. ISSN 1992-1950
Mohd Fua'ad , Rahmat and Syed Salim , Syed Najib and Ahmad 'Athif , Mohd Faudzi and Zool Hilmi, Ismail and Noorhazirah, Sunar and Kamaruzaman, Jusoff (2011) controller. The result shows that the proposed controller reduced the overshoot and steady state error of the pneumatic actuator system to no overshoot and 0.025mm respectively. Index terms: System identification, recursive least square, ARX, dead zone compensator, pneumatic actuator. Non-linear Modeling and Cascade Control of an Industrial Pneumatic Actuator System, 5 (8). pp. 465-477. ISSN 1991-8178
Mohd Aras, Mohd Shahrieel and Hairi, Mohd Hendra and Syed Salim , Syed Najib and Wan Abdul razak, Intan Azmira (2009) Comparison of Fuzzy Control Rules using MATLAB Toolbox and Simulink for DC Induction Motor-Speed Control. In: International Conference of Soft Computing and Pattern Recognition, December 04-December 07, Malacca, Malaysia.
Mohd Shah, Hairol Nizam and Sulaiman , Marizan and Syed Salim , Syed Najib (2008) Fuzzy Logic Approach for Mobile Robot in Intelligent Space. The Institution of Engineers, Malaysia. pp. 38-45. ISSN -
Mohd Shah, Hairol Nizam and Sulaiman , Marizan and Syed Salim , Syed Najib (2008) Obstacle Avoidance for Vision-Based Automated Guided Vechicle (AGV) Using Shortest path Planning. Journal of advanced Manufacturing Technology (AMT). pp. 1-6. ISSN Nil
sabikan, sulaiman and Syed Salim , Syed Najib and Sulaiman , Marizan and Miskon, Muhammad Fahmi (2008) Vision-Based Navigation Of An Autonomous Guided Vehicle For Tracking. In: National conference of Design and Concurrent Engineering, 28-29 Oktober 2008 , Universiti Teknikal Malaysia Melaka, . (Submitted)