Items where Author is "Tamaldin, Noreffendy"

Article

Mansor, Muhd Ridzuan and Omar, Ghazali and Tamaldin, Noreffendy and Abdul Hamid, Nurfaizey and Md. Saad, Adzni and Arshad, M. A. and Akop, Mohd Zaid and Salim, Mohd Azli and Masripan, Nor Azmmi and Majid, M. H.A. and Maamor, M. A. H. M. and Herawan, S. G. and Solah, M. S. (2021) Implementation Of Dark And Raining Environmental Conditions To Investigate Lane Support System Performance For Passenger Cars In Southeast Asia: Case Study For Malaysian Domestic Road. International Review of Mechanical Engineering, 15 (1). pp. 51-58. ISSN 1970-8734 (In Press)

Abdullah, Muhammad Ilman Hakimi Chua and Abdollah, Mohd Fadzli and Tamaldin, Noreffendy and Amiruddin, Hilmi and Ramli, Faiz Redza and Mohamad Norani, Mohamad Nordin (2021) Mechanical And Tribological Properties Of FFF 3D-Printed Polymers: A Brief Review. Jurnal Tribologi, 29. pp. 11-30. ISSN 2289-7232

Abdullah, Muhammad Ilman Hakimi Chua and Mohamad Norani, Mohamad Nordin and Abdollah, Mohd Fadzli bin and Amiruddin, Hilmi and Ramli, Faiz Redza and Tamaldin, Noreffendy (2020) Tribological Analysis Of A 3D-Printed Internal Triangular Flip ABS Pin During Running-In Stage. Jurnal Tribologi, 27. pp. 42-56. ISSN 2289-7232

Sudrajat, Ajat and Tamaldin, Noreffendy and Mat Yamin, Ahmad Kamal and Abdollah, Mohd Fadzli bin and Zakaria, Mohd Hafidz and Nyirenda, Gomezgani (2020) Performance Analysis Of Biodiesel Engine By Addition Of Hho Gas As A Secondary Fuel. Jurnal Tribologi, 26. pp. 120-134. ISSN 2289-7232

Abdulameer Sachit, Fadhil and Tamaldin, Noreffendy and Suhaimi, Misha and Lateef Abdullah, Amira and Mohd Rosli, Mohd Afzanizam (2020) Effect Of A New Absorber Design On The Performance Of PV/T Collector: Numerical Comparative Study. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 71 (1). pp. 60-71. ISSN 2289-7879

Mohamad Norani, Mohamad Nordin and Abdollah, Mohd Fadzli and Abdullah, Muhammad Ilman Hakimi Chua and Amiruddin, Hilmi and Ramli, Faiz Redza and Tamaldin, Noreffendy (2020) Correlation Of Tribo-Mechanical Properties Of Internal Geometry Structures Of Fused Filament Fabrication 3D-Printed Acrylonitrile Butadiene Styrene. Industrial Lubrication and Tribology, 72 (10). pp. 1259-1265. ISSN 0036-8792

Abdollah, Mohd Fadzli bin and Amiruddin, Hilmi and Ramli, Faiz Redza and Tamaldin, Noreffendy and Mohamad Norani, Mohamad Nordin and Abdullah, Muhammad Ilman Hakimi Chua (2020) Synergistic Effect Of Loads And Speeds On The Dry Sliding Behaviour Of Fused Filament Fabrication 3D-Printed Acrylonitrile Butadiene Styrene Pins With Different Internal Geometries. International Journal of Advanced Manufacturing Technology, 108. pp. 2525-2539. ISSN 0268-3768

Omar, Ghazali and A Hamid, Husna and Azli, Siti Ashikin and Jasmee, Solehah and Jalar, Azman and Tamaldin, Noreffendy and Che Ani, Fakhrozi (2020) Thermo-Mechanical And Adhesion Performance Of Silver-Filled Conductive Polymer Composite (SFCP) Using Thermoplastic Polyurethane (TPU) Substrate. International Journal of Nanoelectronics and Materials, 13 (SI). pp. 419-430. ISSN 1985-5761

Abdul Hamid, Nurfaizey and Salim, Mohd Azli and Tamaldin, Noreffendy and Razali, Nadlene and Kamarolzaman, Anita Akmar and Tucker, Nick (2020) Three-Dimensional Uniaxially Aligned Nanofibre Construct Using Secondary Electrode Assisted Gap Electrospinning. International Journal of Nanoelectronics and Materials, 13 (SI). pp. 177-186. ISSN 1985-5761

Abdollah, Mohd Fadzli and Amiruddin, Hilmi and Ramli, Faiz Redza and Tamaldin, Noreffendy and Mohamad Norani, Mohamad Nordin and Abdullah, Muhammad Ilman Hakimi Chua (2020) 3D Printing Parameters Of Acrylonitrile Butadiene Styrene Polymer For Friction And Wear Analysis Using Response Surface Methodology. Proceedings Of The Institution Of Mechanical Engineers, Part J: Journal Of Engineering Tribology, 235 (2). pp. 468-477. ISSN 1350-6501

Abdullah, Amira Lateef and Misha, Suhaimi and Tamaldin, Noreffendy and Mohd Rosli, Mohd Afzanizam and Sachit, Fadhil Abdulameer (2020) Theoretical Study And Indoor Experimental Validation Of Performance Of The New Photovoltaic Thermal Solar Collector (PVT) Based Water System. Case Studies in Thermal Engineering, 18. pp. 1-13. ISSN 2214-157X

Mat Tahir, Noor Ayuma and Abdollah, Mohd Fadzli bin and Amiruddin, Hilmi and Mohamad Zin, Mohd Rody and Tamaldin, Noreffendy (2020) Effect Of Hydrogen On Graphene Growth From Solid Waste Products By Chemical Vapour Deposition: Friction Coefficient Properties. Industrial Lubrication And Tribology, 72 (2). pp. 181-188. ISSN 0036-8792

Abdollah, Mohd Fadzli and Mat Tahir, Noor Ayuma and Tamaldin, Noreffendy and Mohamad Zin, Mohd Rody and Amiruddin, Hilmi (2020) Optimisation Of Graphene Grown From Solid Waste Using CVD Method. International Journal of Advanced Manufacturing Technology, 106 (1-2). pp. 211-218. ISSN 0268-3768

Mat Tahir, Noor Ayuma and Abdollah, Mohd Fadzli bin and Tamaldin, Noreffendy and Amiruddin, Hilmi and Mohamad Zin, Mohd Rody and Kamis, Shahira Liza (2020) Tribological Performance Of The Graphene Synthesized From Fruit Cover Plastic Waste And Oil Palm Fiber Using A CVD Method. Industrial Lubrication and Tribology, 72 (6). pp. 771-777. ISSN 0036-8792

Abdullah, Amira Lateef and Misha, Suhaimi and Tamaldin, Noreffendy and Mohd Rosli, Mohd Afzanizam and Sachit, Fadhil Abdulameer (2019) A Review: Parameters Affecting The PVT Collector Performance On The Thermal, Electrical, And Overall Efficiency Of PVT System. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 60 (2). pp. 191-232. ISSN 2289-7879

Abdullah, Amira Lateef and Misha, Suhaimi and Tamaldin, Noreffendy and Mohd Rosli, Mohd Afzanizam and Sachit, Fadhil Abdulameer (2019) Technology Progress On Photovoltaic Thermal (PVT) Systems With Flat-Plate Water Collector Designs: A Review. Journal Of Advanced Research In Fluid Mechanics And Thermal Sciences, 59 (1). pp. 107-141. ISSN 2289-7879

Mat Tahir, Noor Ayuma and Abdollah, Mohd Fadzli bin and Tamaldin, Noreffendy and Amiruddin, Hilmi and Mohamad Zin, Mohd Rody (2019) Graphene Coatings Technology On Tribology Perspective. International Journal of Recent Technology and Engineering (IJRTE), 8 (1S5). pp. 33-37. ISSN 2277-3878

Abdollah, Mohd Fadzli and Mahmud, Dayang Nor Fatin and Masripan, Nor Azmmi and Tamaldin, Noreffendy and Amiruddin, Hilmi (2019) Influence Of Contact Pressure And Sliding Speed Dependence On The Tribological Characteristics Of An Activated Carbon Epoxy Composite Derived From Palm Kernel Under Dry Sliding Conditions. Friction, 7 (3). pp. 227-236. ISSN 2223-7690

Sachit, Fadhil Abdulameer and Mohd Rosli, Mohd Afzanizam and Tamaldin, Noreffendy and Misha, Suhaimi and Abdullah, Amira Lateef (2019) Numerical Investigation And Performance Analysis Of Photovoltaic Thermal PV/T Absorber Designs: A Comparative Study. Journal Of Advanced Research In Fluid Mechanics And Thermal Sciences, 58 (1). pp. 62-77. ISSN 2289-7879

Abdullah, Amira Lateef and Misha, Suhaimi and Tamaldin, Noreffendy and Mohd Rosli, Mohd Afzanizam and Sachit, Fadhil Abdulameer (2019) Thermal Efficiency And Heat Removal Factor For Hybrid Photovoltaic Thermal PVT System. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 58 (1). 51 - 61. ISSN 2289-7879

Abdullah, Amira Lateef and Misha, Suhaimi and Tamaldin, Noreffendy and Mohd Rosli, Mohd Afzanizam and Sachit, Fadhil Abdulameer (2019) Hybrid Photovoltaic Thermal PVT Solar Systems Simulation Via Simulink/MATLAB. CFD Letters, 11 (4). 64 - 78. ISSN 2180-1363

Mat Tahir, Noor Ayuma and Abdollah, Mohd Fadzli and Tamaldin, Noreffendy and Amiruddin, Hilmi and Mohamad Zin, Mohd Rody and Tokoroyama, Takayuki and Umehara, Noritsugu (2019) The Tribological Potential Of Graphene Growth From Solid Waste. Progress in Industrial Ecology, 13 (4). pp. 401-413. ISSN 1476-8917

Mohmad, Martini and Abdollah, Mohd Fadzli and Tamaldin, Noreffendy and Amiruddin, Hilmi (2017) The Effect Of Dimple Size On The Tribological Performances Of A Laser Surface Textured Palm Kernel Activated Carbon-Epoxy Composite. Industrial Lubrication And Tribology, 69 (5). pp. 768-774. ISSN 0036-8792

Mahmud, Dayang Nor Fatin and Abdollah, Mohd Fadzli and Masripan, Nor Azmmi and Tamaldin, Noreffendy and Amiruddin, Hilmi (2017) Frictional Wear Stability Mechanisms Of An Activated Carbon Composite Derived From Palm Kernel By Phase Transformation Study. Industrial Lubrication And Tribology, 69 (6). pp. 945-951. ISSN 0036-8792

Lee, Shing Chuan and Tamaldin, Noreffendy and Abdollah, Mohd Fadzli (2017) Tribological Performance Of Low Blend Decanter Cake Biodiesel. Industrial Lubrication And Tribology, 69 (3). pp. 425-432. ISSN 0036-8792

Rahmat, Mohd Sabirin and Ahmad, Fauzi and Mat Yamin, Ahmad Kamal and Tamaldin, Noreffendy and Aparow, Vimal Rau and Jamaludin, Hishamuddin (2016) Simulation of Hybrid Electric Vehicle based on a Series Drive Train Layout. Jurnal Teknologi, UTM, 78 (6). pp. 211-221. ISSN 0127-9696

Abdullah, Muhammad Ilman Hakimi Chua and Abdollah, Mohd Fadzli and Amiruddin, Hilmi and Tamaldin, Noreffendy and Mat Nuri, Nur Rashid (2016) The Potential Of hBN Nanoparticles As Friction Modifier And Antiwear Additive In Engine Oil. Mechanics & Industry, 17 (1). pp. 1-6. ISSN 2257-7777

Abdul Kadir, Faizul Akmar and Tamaldin, Noreffendy and Ayob, Md Razali and Abdullah, Mohd Azman and Hudha, Khisbullah and Mat Yamin, Ahmad Kamal (2014) Vehicle Speed Control Using Gain Scheduling PID With Experimental Throttle-In-The-Loop. International Review on Modelling & Simulations, 7 (4). pp. 682-693. ISSN 1974-9821

Abdul Kadir, Faizul Akmar and Tamaldin, Noreffendy and Ayob, Md Razali and ABDULLAH, Mohd Azman and HUDHA, Khisbullah and Mat Yamin, Ahmad Kamal (2014) Vehicle Speed Control Using Gain Scheduling PID with Experimental Throttle-in-the-Loop. International Review on Modelling & Simulations, 7 (4). pp. 682-693. ISSN 1974-9821

Abdollah, Mohd Fadzli and Mazlan, Mohd Afiq Azfar and Amiruddin, Hilmi and Tamaldin, Noreffendy (2014) Experimental Study on Friction and Wear Behaviors of Ball Bearings under Gas Lubricated Conditions. Jurnal Teknologi , 66 (3). pp. 43-49. ISSN 2180-3722

Abdullah, Mohd Azman and Tamaldin, Noreffendy and Ramli, Faiz Redza and Sudin, Mohd Nizam and Mohamed Muslim, Abdul Mu'in (2014) Analysis Of The Chassis And Components Of All Terrain Vehicle (ATV). Applied Mechanics and Materials, 660. pp. 753-757. ISSN 1660-9336

Abdullah, Mohd Azman and Tamaldin, Noreffendy and Ramli, Faiz Redza and Sudin, Mohd Nizam and Mohamed Muslim, Abdul Mu'in (2014) Design And Development Of Low Cost All Terrain Vehicle (ATV). Applied Mechanics and Materials, 663 (-). pp. 517-521. ISSN 1660-9336

ABDULLAH, Mohd Azman and Tamaldin, Noreffendy and Rusnandi, Herdy and Manoharan, Tayalan and Samsir, Muhammad Afiq (2013) Development and Modification of a Single Overhead Camshaft 4-Valve 4-Stroke 135 cc Formula Varsity Race Car Engine. IOP SCIENCE IOP Conf.Series:MaterialsScienceandEngineering, 50. pp. 1-7. ISSN 1757-899X

ABDULLAH, Mohd Azman and Mansor, Muhd Ridzuan and Tamaldin, Noreffendy and Thanaraj, Krishnan (2013) Development of Formula Varsity Race Car Chassis. IOP Conf. Series: Materials Science and Engineering, 50 (012001). pp. 1-11. ISSN 1757-899X

Rahmat, Mohd Sabirin and Ahmad, Fauzi and Mat Yamin, Ahmad Kamal and Aparow, Vimal Rau and Tamaldin, Noreffendy (2013) Modelling and Torque Tracking Control of Permanent Magnet Synchronous Motor For Hybrid Electric Vehicles. International Journal of Automotive and Mechanical Engineering , 7. pp. 955-967. ISSN 2229-8649 (Print); 2180-1606 (Online)

Tamaldin, Noreffendy (2010) Experimental study of SCR in a light-duty diesel exhaust to provide data for validation of a CFD model using the porous medium approach. SAE 2010 World Congress & Exhibition, April 2010, Detroit, MI, USA, Session: Diesel Exhaust Emission Control: SCR (Part 3 of 3) (2010-01-1177).

Conference or Workshop Item

Hananto, April Lia and Murtalim and Amir and Fauzi, Ahmad and Suhara, Ade and Priyatna, Bayu and Veza, Ibham and Tamaldin, Noreffendy (2023) Cascade-forward neural network (CFNN) for biomass heating value prediction. In: 2021 International Summit on Education, Technology and Humanity, ISETH 2021, 20 December 2021throughDecember 2021, Surakarta.

Rosley, Mohammad Nazry and Tamaldin, Noreffendy and Abdollah, Mohd Fadzli and Zakaria, Muhammad Zulfattah and Mat Yamin, Ahmad Kamal (2016) Emission Characteristics of Hydrogen Enrichment in Light Duty Single Cylinder Diesel Engine. In: The 4th International Conference on Engineering and ICT (ICEI 2016), 4 April 2016 - 6 April 2016, Hatten Hotel Melaka. (Submitted)

Abdullah, Adli Zil Ikram and Abdollah, Mohd Fadzli bin and Tee, Boon Tuan and Amiruddin, Hilmi and Mat Yamin, Ahmad Kamal and Tamaldin, Noreffendy (2015) Thermal performance of carbon-based microencapsulated phase change materials. In: Mechanical Engineering Research Day 2015, 31 March 2015, Melaka.

Khalid, Mohamad Kamal and Mansor, Muhd Ridzuan and Mohd Tahir, Musthafah and Hassan, Muhammad Zahir and Tamaldin, Noreffendy (2011) A STUDY ON BRAKING PERFORMANCE OF UTEM ECO-CAR DISC BRAKE SYSTEM. In: International Seminar on the Application of Science & Mathematics 2011 (ISASM 2011), 1-3 November 2012, PWTC Kuala Lumpur.

Alimin, Ahmad Jais and Tamaldin, Noreffendy and Mamat, Rizalman (2011) Strategic Research Partnership on Automotive Powertrain & Fuels in Universiti Malaysia Pahang, Universiti Teknikal Malaysia Melaka & Universiti Tun Hussein Onn Malaysia. In: Malaysian Technical Universities International Conference on Engineering & Technology (MUiCET 2011), 13-15 November 2011, UTHM, Batu Pahat, Johor.

Mamat, Rizalman and Abdullah, Nik Rosli and Tamaldin, Noreffendy (2010) Emissions of a Single Cylinder Diesel Engine Operating with Ethanol. In: ENGINEERING MECHANICS & TRANSPORT 2010 (EMT2010), 25-27 Nov 2010, LVIV, ukraine.

Omar, Ghazali and Tamaldin, Noreffendy and Muhamad, M. Rasat (2000) Correlation of silicon wafer strength to the surface morphology. In: (ICSE 2000)- IEEE International Conference on Semiconductor Electronics, 2000., 13-15 Nov 2000, Guoman Resort, Port Dickson.

Book

Shetty, Devdas and Tamaldin, Noreffendy and Campana, Claudio and Kondo, Jun (2004) E-Manufacturing: Business Paradigms And Supporting Technologies: 18th International Conference On Cad/Cam, Robotics, And Factories Of The Future (Cars & Fof), July 2004. Kluwer Academic Publishers Norwell, MA, USA ©2004 , Norwell, MA USA. ISBN 1402076541