Items where Author is "Yahaya, Saifudin Hafiz"

Article

Salleh, Mohd Shukor and Wakhi Anuar, Nur Farah Bazilah and Yahaya, Saifudin Hafiz and Omar, Mohd Zaidi and Ali, Mohd Azamuddin and Subramonian, Sivarao (2022) Characteristics of A1Si7Mg0.3/X-GNPs composites manufactured via stir casting method. Journal Of Advanced Manufacturing Technology (JAMT), 16 (2). pp. 29-40. ISSN 1985-3157

Yahaya, Saifudin Hafiz and Salleh, Mohd Shukor and Abd Rashid, Mohd Warikh and Abdullah, Abu and Jano, Zanariah and Miura, Kenjiro Takai (2022) An extensive analysis of frequency and transient responses in S and C-shaped gears. Australian Journal of Mechanical Engineering, 20 (3). 825 - 837. ISSN 1448-4846

Yahaya, Saifudin Hafiz and Subramonian, Sivarao and Salleh, Mohd Shukor and Satish, Pujari and Kadirgama, Kumaran (2021) Importance Of Knowledge-Attitude-Practice To Enhance University Technology Transfer. Journal of Advanced Manufacturing Technology, 15 (2). pp. 71-82. ISSN 1985-3157

Yahaya, Saifudin Hafiz and Yaakub, Siti Farizah and Salleh, Mohd Shukor and Ahmad, Fauzi and Yaakob, Mohd Yuhazri and Akmal, Suriati (2021) Comparison study for double passive car suspension system through mathematical modelling and experimental work. International Journal of Advanced Technology and Engineering Exploration, 8 (82). pp. 1183-1192. ISSN 2394-7454

Salleh, Mohd Shukor and Mohammad Ali, Nur Fatihatur Rawdhah and Yahaya, Saifudin Hafiz and Al-Zubaidi, S.S. (2021) Effects Of Induction Heating On Thixoformed MWCNT-Al Alloy Composite. Journal of Advanced Manufacturing Technology, 15 (1). pp. 27-37. ISSN 1985-3157

Hashim, Hanizam and Salleh, Mohd Shukor and Abd Rahman, Mohd Soufhwee and Yahaya, Saifudin Hafiz and Abd Rashid, Mohd Warikh and Omar, Mohd Zaidi and Al-Zubaidi, Salah and Sulong, Abu Bakar (2020) T6 Heat Treatment Optimization Of Thixoformed LM4 Aluminium Alloy Using Response Surface Methodology. Malaysian Journal on Composites Science and Manufacturing, 3 (1). pp. 1-13. ISSN 2716-6945

Salleh, Mohd Shukor and Jaafar, Mohd Fairuz and Raja Abdullah, Raja Izamshah and Yahaya, Saifudin Hafiz and Hassan, M.H. and Al-Zubaidi, S.S. (2020) Influence Of Point And Helix Angle On Thrust Force And Delamination For One-Shot Drilling Of Carbon Fiber Reinforced Plastic (CFRP). Journal of Advanced Manufacturing Technology (JAMT), 14 (2). pp. 15-28. ISSN 1985-3157

Salleh, Mohd Shukor and Yahaya, Saifudin Hafiz and Mohamad, Noraiham and Hashim, Hanizam and Omar, Mohd Zaidi (2020) Mechanical Properties Of Thixoformed Al-5Si Alloy Composite Reinforced By Multiwalled Carbon Nanotubes And Alumina Powder. Malaysian Journal on Composite Science and Manufacturing, 1 (1). pp. 38-44. ISSN 2716-6945

Salleh, Mohd Shukor and Ab Rahman, Azhan and Yahaya, Saifudin Hafiz and Yaakob, Mohd Yuhazri and Akmal, Suriati (2020) A Comprehensive Review On The Influence Of Equal Channel Angular Pressing Parameters On Magnesium Alloys. International Journal of Engineering Research and Technology, 13 (11). pp. 3855-3871. ISSN 0974-3154

Salleh, Mohd Shukor and Yahaya, Saifudin Hafiz and Abdul Rahman, Azrul Azwan and Othman, Intan Sharhida and Al Zubaidi, S.S. and Zulkifli, K. (2020) Investigation Of Mechanical & Wear Characteristics Of T6 Heat Treated Thixoformed Aluminium Alloy Composite. Journal of Advanced Manufacturing Technology (JAMT), 14 (3). pp. 1-14. ISSN 1985-3157

Salleh, Mohd Shukor and Abd Rahman, Ammar and Othman, Intan Sharhida and Subramonian, Sivarao and Yahaya, Saifudin Hafiz and Siswanto, Nurhadi (2019) Investigation Of Wear And Corrosion Characteristics Of Short Heat Treated Thixoformed Aluminium Alloy. Journal of Advanced Manufacturing Technology, 13 (3). pp. 101-113. ISSN 1985-3157

Salleh, Mohd Shukor and Hashim, Hanizam and Yahaya, Saifudin Hafiz and Nurhadi, Siswanto (2019) Effect Of Magnesium Surfactant On Wettability Of Carbon Nanotube In A356 Alloy Composite. Journal of Advanced Manufacturing Technology (JAMT), 13 (2). pp. 33-44. ISSN 1985-3157

Yahaya, Saifudin Hafiz and Yaakub, Siti Farizah and Salleh, Mohd Shukor and Abd Rashid, Mohd Warikh and Abdullah, Abu and Purnomo, Muhammad Ridwan Andi (2019) Mathematical Modelling Of The Passive And Semi-Active Automobile Suspension Systems In Ford Scorpio Car Model. Journal of Advanced Manufacturing Technology (JAMT), 13 (2). pp. 83-96. ISSN 1985-3157

Salleh, Mohd Shukor and Mohamad Ishak, Nurul Naili and Yahaya, Saifudin Hafiz and Subramonian, Sivarao and Abdullah, A. (2018) Effect Of Equal Channel Angular Pressing On The Microstructure And Mechanical Properties Of A356 Alloy. Journal Of Advanced Manufacturing Technology, 12. pp. 23-39. ISSN 1985-3157

Yahaya, Saifudin Hafiz and Yaakob, Mohd Yuhazri and Abdullah, Abu and Husin, Mohd Amirhafizan and Kamarul, A.M. and Lau, S.T.W. (2018) Kenaf Fibre Composites As Promising Green-Composites For Automotive Car Door Map Pocket Application. International Journal of Mechanical & Mechatronics Engineering IJMME-IJENS, 18 (2). pp. 15-21. ISSN 2227-2771

Yahaya, Saifudin Hafiz and Yaakob, Mohd Yuhazri and W.N., Hidayah and Haeryip , Sihombing and Sulaiman, Shamsudin and A.M, Kamarul (2018) Kansei Engineering Approach For The Customers Preferences Of Car Design. Advances in Intelligent Systems and Computing, 739. pp. 289-295. ISSN 2194-5357

Yahaya, Saifudin Hafiz and W. N., Hidayah and Salleh, Mohd Shukor and Abdullah, Abu and H., Sihombing (2018) Customer Preferences In Car Design Using Kansei Engineering And Cubic Bezier Curve. International Journal Of Engineering & Technology, 7 (4). pp. 4170-4173. ISSN 2227-524X

Yaakob, Mohd Yuhazri and Husin, Mohd Amirhafizan and Saijod, Lau and Abdullah, A. and Yahaya, Saifudin Hafiz (2017) Potentiality Of Utilising Non-Woven Kenaf Fibre Composite For Car Door Map Pocket. Journal of Advanced Manufacturing Technology (JAMT) , 11 (2). pp. 129-138. ISSN 1985-3157

Salleh, Mohd Shukor and Ishak, Anuar and Mohamad, Effendi and Sukarma, Lukman and Mahmood, Azmi B.R. and A Rahman, Muhamad Arfauz and Yahaya, Saifudin Hafiz and Salleh, Mohd Shukor and Sulaiman, Mohd Amri (2017) Cleaner Production Implementation Using Extended Value Stream Mapping For Enhancing The Sustainability Of Lean Manufacturing. Journal of Advanced Manufacturing Technology (JAMT) , 2289-8 (1). pp. 47-60. ISSN 1985-3157

Mohamad Ishak, Nurul Naili and Salleh, Mohd Shukor and Yahaya, Saifudin Hafiz and Mohamad, Effendi and Sulaiman, Mohd Amri (2017) The Effect of Equal Channel Angular Pressing (ECAP) on the Microstructure and Hardness of A356 Aluminium Alloy. Journal Of Advanced Manufacturing Technology (JAMT), 11 (2). pp. 47-57. ISSN 1985-3157

Safian, Mohd Azizul Hikmi and Salleh, Mohd Shukor and Subramonian, Sivarao and Hussein, Nur Izan Syahriah and Sulaiman, Mohd Amri and Yahaya, Saifudin Hafiz (2017) Production Of LM4 Feedstock For Thixoforming By Using Cooling Slope Casting. Journal Of Advanced Manufacturing Technology (JAMT) , 11 (1). pp. 77-90. ISSN 1985-3157

Salleh, Mohd Shukor and Mohamad Ishak, Nurul Naili and Safian, Mohd Azizul Hikmi and Yahaya, Saifudin Hafiz (2016) Microstructural Analysis And Mechanical Properties Of LM6 Alloy Processed By Cooling Slope Casting. Journal of Advanced Manufacturing Technology (JAMT) , 10 (2). p. 1. ISSN 1985-3157

Maidin, Shajahan and Loo, Heoy Shin and Alkahari, Mohd Rizal and Samat, Khairul Fadzli and Yahaya, Saifudin Hafiz (2015) Bone Scaffold Geometrical Design And Material Selection By Using Analytical Hierarchy Process For Additive Manufacturing Process. Jurnal Teknologi, 77 (32). pp. 141-149. ISSN 0127-9696

Bin Md Fauadi, Muhammad Hafidz Fazli and Yahaya, Saifudin Hafiz (2013) Intelligent Combinatorial Auctions of Decentralized Task Assignment for AGV With Multiple Loading Capacity. IEEJ TRANSACTIONS ON ELECTRICAL AND ELECTRONIC ENGINEERING, 8 (4). pp. 371-379. ISSN 1931-4973

Yahaya, Saifudin Hafiz and Sihombing, Haeryip and Yaakob, Mohd Yuhazri (2013) G2 Bézier-Like Cubic as the S-Transition and C-Spiral Curves and Its Application in Designing a Spur Gear Tooth. Australian Journal of Basic and Applied Sciences. pp. 109-122. ISSN 1991-8178

Conference or Workshop Item

Mohd Najib , Ali Mokhtar and Nik Anwar, Nik Syahrim and Muhammad, Mohd Nazrin and Akiah, Masni-Azian and Yahaya, Saifudin Hafiz (2012) Motion Synthesis Of Planar Four Linkage Movement For Part Flipping Application. In: the 3rd International Conference on Engineering & ICT (ICEI 2012) , 4-6 April 2012, Mahkota Hotel, Melaka. (Submitted)

Wasim, Muhammad Abbas and Yahaya, Saifudin Hafiz and Jamal, Ena and Abd Majid, Ahmad and Md. Ali, Jamaludin (2011) Spur gear tooth design and transition curve as a spiral using cubic trigonometric Bezier function. In: 2011 Eighth International Conference Computer Graphics, Imaging and Visualization, 17-19 August 2011, Singapore.