Items where Division is "Library > Tesis > FKM" and Year is 2021

A

Abd Aziz, Muhammad Syahril (2021) Development of thermal electric cooling air conditioner by evaporative cooling. Masters thesis, Universiti Teknikal Malaysia Melaka.

Abdul Kadir, Hakim Naqiuddin (2021) Design and analysis a black box for used cooking oil filtration. Masters thesis, Universiti Teknikal Malaysia Melaka.

Albadarneh, Mousa Jamal Salem (2021) Energy efficiency in academic buildings through optimization and operational strategies. Masters thesis, Universiti Teknikal Malaysia Melaka.

Arifin, Khairil Anwar (2021) Investigation of energy management practice and achievement in UTeM. Masters thesis, Universiti Teknikal Malaysia Melaka.

Azahari, Norzailan (2021) Investigation on the sound transmission loss of door sealing system using hybrid FE-SEA method. Masters thesis, Universiti Teknikal Malaysia Melaka.

C

Che Othaman, Siti Syahirah (2021) Mechanical characterisation of hybrid GNPS and functionalised BN as a thermal interface material. Masters thesis, Universiti Teknikal Malaysia Melaka.

Chin, Kwang Yhee (2021) Experimental study of yaw angle effect on aerodynamic performance of road vehicle with rear spoiler. Masters thesis, Universiti Teknikal Malaysia Melaka.

F

Farhan, Irfan Alias (2021) A Simulation Study On Temperature Non-Uniformity Of Photovoltaic Thermal Using Computational Fluid Dynamics. Masters thesis, Universiti Teknikal Malaysia Melaka.

H

Hanif, Haziq Haiqal (2021) Optimization of fan load via core clocking of a triple fan GPU system. Masters thesis, Universiti Teknikal Malaysia Melaka.

Hermanto, Tino (2021) Effect Of Low Frequency Excitation Location For Crack Detection In Aluminium Plate Using Nonlinear Vibro-Acoustic Method. Masters thesis, Universiti Teknikal Malaysia Melaka.

I

Ibnu Mustaffa, Mukhzani (2021) Development Of Fuel Cell And Solar Prototype For Melaka River Cruise Boat. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ismail, Mohd Shahrom (2021) Stability analysis of cone-cylinder shell structures. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

L

Lau, Saijod Tse Way (2021) Energy Absorption Performance Of Natural Fibres Reinforced Epoxy Composite Tubes Under Axial And Oblique Loading. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

M

Mahboob Ali, Muhammad Razif (2021) Development and analysis of lab scaled machine for 3D concrete printing. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mahidan, Fairuz Mardhiah (2021) Instability and sensitivity to imperfection of conical shell subjected to axial compression. Masters thesis, Universiti Teknikal Malaysia Melaka.

Majid, Siti Najatul Aishah (2021) Experimental investigation of 3D printed component with integrated pressing tool. Masters thesis, Universiti Teknikal Malaysia Melaka.

Md Alias, Muhammad Aizat (2021) Lubrication and tribological properties of palm oil mixed with organo zinc compound. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Farhan Han, Syaza Najwa (2021) Characterisation Of Kenaf Fibre Reinforced Acrylonitrile Butadiene Styrene Composites For Fused Filament Fabrication. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Yunos, Afiqah (2021) Interfacial adhesion between silver ink and thermoplastic polyurethane and electromechanical reliability of flexible printed circuit. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mosa, Ali Ibrahim (2021) Modelling The Acoustic Performance Of Inhomogeneous Micro-Perforated Panel Absorber. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Muazzam Zainudin, Muhammad Ikhwan (2021) Investigation of factors affecting flame stabilization in meso-scale combustor. Masters thesis, Universiti Teknikal Malaysia Melaka.

N

Nazan, Muhammad Afdhal (2021) Investigation Of Warping Deformation By Starch Adhesion In Fused Deposition Modelling 3D Printer. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ng, Lim Huat (2021) Design and development of 3D printer filament extruder. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ng, Lin Feng (2021) Characterisation of kenaf/pineapple leaf fibre reinforced composite-metal laminates with enhanced mechanical properties. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

R

Rokhim, Mochamad Iqbal (2021) Development of validated finite element model for reinforced thin-walled I-beam using steel patch method. Masters thesis, Universiti Teknikal Malaysia Melaka.

Rosnazri, Muhammad Hamizan (2021) The impact of HHO enrichment in single-cylinder diesel engine via simulation environment. Masters thesis, Universiti Teknikal Malaysia Melaka.

S

Saad, Hartini (2021) A study of highly conductive pattern by manual printing of graphene nanoparticles with different width size. Masters thesis, Universiti Teknikal Malaysia Melaka.

Sachit, Fadhil Abdulameer (2021) Performance analysis of water based photovoltaic thermal collector with serpen-direct absorber. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Salima, Wongani Clement Kizito (2021) Product redesign by topology optimization for additive manufacturing process. Masters thesis, Universiti Teknikal Malaysia Melaka.

Salimen, Nurfarhana (2021) A simulation study of photovoltaic system integrated with phase change material using ANSYS. Masters thesis, Universiti Teknikal Malaysia Melaka.

Shaharudin, Nur Amalina (2021) Autonomous Collision Avoidance System Using Combined Four-Wheel Steering And Direct Yaw-Moment Control. Masters thesis, Universiti Teknikal Malaysia Melaka.

Shaikh Ahmad Hilmy, Shaikh Tahfiq Falahin (2021) Study The Temperature Distribution Of Solar Powered Drying Chamber Using CFD Simulation. Masters thesis, Universiti Teknikal Malaysia Melaka.

Sharif, Mohd Luqman Hakim (2021) Functional electrospun nanofibres for heat dissipation applications. Masters thesis, Universiti Teknikal Malaysia Melaka.

Suarin, Mohd Azizan (2021) Biomechanical study of total disc replacement prosthesis on spinal facet joint using finite element method. Masters thesis, Universiti Teknikal Malaysia Melaka.

Subramaniam, Kathiravan (2021) Investigation of mechanical performance of woven kenaf/glass hybrid composite metal laminate. Masters thesis, Universiti Teknikal Malaysia Melaka.