Items where Division is "Faculty of Electrical Engineering > Department of Power Electronics & Drives" and Year is 2013

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Number of items: 34.

Ab Ghani, Sharin and Md Thayoob, Yasmin Hanum and Yang Ghazali, Young Zaidey and Ahmad Khiar, Mohd Shahril and Sutan Chairul, Imran (2013) Condition Monitoring of Distribution Transformer's Mechanical Parts Using Sweep Frequency Response Analysis (SFRA). In: INTERNATIONAL TRIBOLOGY CONFERENCE MALAYSIA 2013, 18-20 November 2013, Kota Kinabalu, Sabah, Malaysia.

Abdul Shukor, Fairul Azhar and Misron, Norhisam and Wakiwaka, Hiroyuki and Tashiro, Kunihisa and Nirei , Masami (2013) Performance analysis of 6 Slot 8 Pole permanent magnet linear mot. Journal of Engineering and Technology, 4 (2). pp. 23-37. ISSN 2180-3811

Abdul Shukor, Fairul Azhar and Tashiro, Kunihisa and Wakiwaka, Hiroyuki and Misron, Norhisam (2013) Design and consideration of driving method of cylindrical VR type linear pulse motor. In: Technical Meeting on Linear Drives of IEE Japan, 22 Feb. 2013, Tokyo, Japan.

Abdul Shukor, Fairul Azhar and Misron, Norhisam and Wakiwaka, Hiroyuki and Tashiro, Kunihisa and Nirei, Masami (2013) Performance Analysis Of 6 Slot 8 Pole Permanent Magnet Linear Motor. Journal of Engineering and Technology, 4 (2). pp. 23-37. ISSN 2180-3811

Abdul Shukor , Fairul Azhar and Wakiwaka, Hiroyuki and Tashiro, Kunihisa and Yajima, Hisashi and Kanazawa, Takehiko and Fujiwara, Nobuhiro (2013) Performance evaluation and comparison of switched reluctance cylindrical linear motor. In: The 22th MAGDA Conference, 2-3 December 2013, Miyazaki, Japan.

Abdullah, Abdul Rahim and ahmad, nur sumayyah and Bahari, Norhazilina and Manap, Mustafa and JOPRI, MOHD HATTA (2013) Short-Circuit Switches Fault Analysis of Voltage Source Inverter using Spectrogram. In: Electrical Machines and Systems (ICEMS), 2013 International Conference on, 26-29 October 2013, Busan, Korea.

Abdullah, Abdul Rahim and ahmad, nur sumayyah and Shair, Ezreen Farina and Jidin , Auzani (2013) Open switch faults analysis in voltage source inverter using spectrogram. In: Power Engineering and Optimization Conference (PEOCO), 2013 IEEE 7th International, 3-4 June 2013, Langkawi, Malaysia.

Alias, Nor Faezah and Jidin , Auzani and Razi, Atikah and Sutikno, Tole and Ismail, Huzainirah (2013) Simple Switching Strategy for High-Torque Control Performance utilizing Neutral Point Clamped Multilevel Inverter. Simple Switching Strategy for High-Torque Control Performance utilizing Neutral Point Clamped Multilevel Inverter. pp. 400-408. ISSN 2088-8694

Alias, Nor Faezah and Jidin , Auzani and Said, Mohamed Azmi and Abdullah, Abdul Rahim and JOPRI, MOHD HATTA and Rahim, Nor Hidayah (2013) Improved Performance of Direct Torque Control of Induction Machine with 3-Level Neutral Point Clamped Multilevel Inverter. In: Power Engineering and Optimization Conference (PEOCO), 2013 IEEE 7th International, 3 june 2013, Langkawi Island, Malaysia.

Bugis, Ismadi and Hassen Kareem, Maithem (2013) Application of swallowtail catastrophe theory to transient stability assessment of multi-machine power system. Journal of Theoretical and Applied Information Technology, 55 (3). pp. 390-397. ISSN 1992-8645

Bugis, Ismadi and Hassen Kareem, Maithem (2013) Dual generator cluster transient stability assessment using swallowtail catastrophe theory. International Review on Modelling and Simulations, 6 (3). pp. 931-936. ISSN 1974-9821 (Submitted)

Jamri , Mohd Saifuzam and Anuar , Mohamed Kassim (2013) Control of Maximum Power Point Tracking for Stand-Alone Photovoltaic System Using Voltage Comparison Technique. Australian Journal of Basic and Applied Sciences. pp. 229-236. ISSN 1991-8178

Jamri , Mohd Saifuzam and Anuar , Mohamed Kassim and Mohd Ruzaini, Hashim (2013) A Voltage Mode Control Maximum Power Point Tracking for Stand-Alone Photovoltaic System. Applied Mechanics and Materials , (Volum. pp. 503-507. ISSN 1662-7482

Jidin, Auzani (2013) An Improved FPGA Implementation of Direct Torque Control for Induction Machines. IEEE Transactions on Industrial Informatics . pp. 1-10. ISSN 1551-3203

Kamarudin, Muhammad Nizam and Md Rozali, Sahazati and Husain, A.Rashid (2013) Observer-Based Output Feedback Control With Linear Quadratic Performance. Procedia Engineering , 53 (-). pp. 233-240. ISSN 1877-7058

Lourdes Victor Raj, Logan Raj and Jidin , Auzani and Abdul Karim, Kasrul and Sutikno, Tole and Sundram, Ramahlingam and JOPRI, MOHD HATTA (2013) Improved Torque Control Performance of Direct Torque Control for 5-Phase Induction Machine. International Journal of Power Electronics and Drive System (IJPEDS). pp. 391-399. ISSN 2088-8694

Lourdes Victor Raj, Logan Raj and Jidin , Auzani and Ibrahim, Zulkifli and Abdul Karim, Kasrul and Said, Mohamed Azmi and JOPRI, MOHD HATTA (2013) Optimal Torque Control Performance of DTC of 5-Phase Induction Machine. In: 2013 International Conference on Electrical Machines and Systems (ICEMS) - IEEE, 26-29 October 2013, Busan, Korea.

Lukar Herlino, Adeline and Jidin, Auzani and Che Wan Mohd Zalani, Che Wan Mohd Faizal and Sanusi, Syamim and Jopri, Mohd Hatta and Manap, Mustafa (2013) Comparative Study Of Current Control Strategy For DC Motors. In: Power Engineering And Optimization Conference (PEOCO), 2013 IEEE 7th International, 3 June 2013, Langkawi Island, Malaysia.

Nair, Ravin and Jidin , Auzani and Othman, Md Nazri and JOPRI, MOHD HATTA and Manap, Mustafa (2013) Comparison Performance of 3-Level and 5-Level Cascaded H-Bridge Multilevel Inverter of DTC of Induction Machine. In: 2013 International Conference on Electrical Machines and Systems (ICEMS), 26-29 October 2013, Busan, Korea.

Noor Azam, Ahmad Faiz and Jidin , Auzani and Said, Mohamed Azmi and JOPRI, MOHD HATTA and Manap, Mustafa (2013) High Performance Torque Control of BLDC Motor. In: 2013 IEEE - International Conference on Electrical Machines and Systems (ICEMS), 26-29 October 2013, Busan, Korea.

Noor Azam, Ahmad Faiz and Jidin , Auzani and Ngatiman, Nor Azazi and JOPRI, MOHD HATTA and Manap, Mustafa and Lukar Herlino, Adeline and Alias, Nor Faezah (2013) Current Control of BLDC Drives for EV Application. In: Power Engineering and Optimization Conference (PEOCO), 2013 IEEE 7th International, 3 june 2013, Langkawi Island, Malaysia.

Nor Azizah , Mohd Yusoff and Abdul Karim, Kasrul and Ab Ghani, Sharin (2013) A Review of Finite Element Method in Detecting Incipient Faults Occur in Power Transformer. In: Seminar Hasil Penyelidikan Sektor Pengajian Tinggi Kementerian Pendidikan Malaysia, Ke-3, 2-3 Julai 2013, EDC, Universiti Utara Malaysia.

Raja Yunus , Raja Nor Azrin and Jidin , Auzani and Alias, Nor Faezah and Lukar Herlino, Adeline and Manap, Mustafa (2013) Performance Analysis of Direct Torque Control of Induction Machines. In: 2013 International Conference on Electrical Machines and Systems (ICEMS) - IEEE, 26-29 October 2013, Busan, Korea.

Sanusi, Syamim and Ibrahim, Zulkifli and Jidin , Auzani and JOPRI, MOHD HATTA and Abdul Karim, Kasrul and Othman, Md Nazri (2013) Implementation of Space Vector Modulation for Voltage Source Inverter. In: 2013 IEEE-International Conference on Electrical Machines and Systems (ICEMS), 26-29 October 2013, Busan, Korea.

Sutikno, Tole and Nik Idris, Nik Rumzi and Jidin , Auzani and JOPRI, MOHD HATTA (2013) FPGA Based Optimized Discontinuous SVPWM Algorithm for Three Phase VSI in AC Drives. International Journal of Power Electronics and Drive System (IJPEDS). pp. 228-240. ISSN 2088-8694

Sutikno, Tole and Nik Idris, Nik Rumzi and Jidin, Aiman Zakwan and Jidin , Auzani (2013) A Model of FPGA-based Direct Torque Controller. TELKOMNIKA: Indonesian Journal of Electrical Engineering. pp. 747-753. ISSN 2302-4046

Sutikno, Tole and Nik Idris, Nik Rumzi and Jidin , Auzani and Marcian, N. Cirstea (2013) An Improved FPGA Implementation of Direct Torque Control for Induction Machines. IEEE Transactions on Industrial Informatics . pp. 1280-1290. ISSN 1551-3203

Talib, Md Hairul Nizam and Ibrahim, Zulkifilie and Abd. Rahim, Nasrudin and Abu Hasim, Ahmad Shukri (2013) Implementation of Anti-Windup PI Speed Controller for Induction Motor Drive Using dSPACE and Matlab/Simulink Environment. Australian Journal of Basic and Applied Sciences, 7 (7). pp. 348-357. ISSN 1991-8178

Talib, Md Hairul Nizam and Ibrahim, Zulkifilie and Abd Rahim, Nasrudin and Abu Hasim, Ahmad Shukri (2013) Characteristic of Induction Motor Drives Fed by Three Leg and Five Leg Inverters. Journal of Power Electronics (JPE), 13 (5). pp. 806-813. ISSN 1598-2092

Talib, Md Hairul Nizam and Ibrahim, Zulkifilie and Abd Rahim, Nasrudin and Abu Hasim, Ahmad Shukri (2013) Characteristic of induction motor drives fed by three leg and five leg inverters. Journal of Power Electronics (JPE), 13 (5). pp. 806-813. ISSN 1598-2092

Zhu, Zi Qiang and Mohd Jamil, Mohd Luqman and Wu, Li Jian (2013) Influence of Slot and Pole Number Combinations on Unbalanced Magnetic Force in PM Machines With Diametrically Asymmetric Windings. IEEE Transactions on Industry Applications, 49 (1). pp. 19-30. ISSN 0093-9994

Zuber Ahmadi, Muhd Zharif Rifqi and Jidin , Auzani and Mohamad Sapiee, Mohd Razali and Othman, Md Nazri and P.Nagarajan, Ravin Nair and JOPRI, MOHD HATTA (2013) Digital Implementation of Direct Torque Control of Induction Machines. In: Power Engineering and Optimization Conference (PEOCO), 2013 IEEE 7th International, 3 june 2013, Langkawi Island, Malaysia.

Zuber Ahmadi, Muhd Zharif Rifqi and Jidin , Auzani and Othman, Md Nazri and JOPRI, MOHD HATTA and Manap, Mustafa (2013) Improved Performance of Direct Torque Control of Induction Machine utilizing 3-Level Cascade H-Bridge Multilevel Inverter. In: Power Engineering and Optimization Conference (PEOCO), 2013 IEEE 7th International, 3 june 2013, Langkawi Island, Malaysia.

ahmad, Nur Hafizatul Tul Huda and Abdullah, Abdul Rahim and JOPRI, MOHD HATTA (2013) Power Quality Signals Detection Using S-Transform. In: Power Engineering and Optimization Conference (PEOCO), 2013 IEEE 7th International, 3 june 2013, Langkawi Island, Malaysia.

This list was generated on Mon Dec 23 14:05:22 2024 +08.