Items where Division is "Faculty of Mechanical and Manufacturing Engineering Technology > Department of Manufacturing Engineering Technology" and Year is 2021

Article

Abdul Rasib, Amir Hamzah and Musazali, Mussyahirah (2021) Formulation Of Nao Equation According To Nao Framework. Turkish Journal of Computer and Mathematics Education, 12 (3). pp. 5042-5050. ISSN 1309-4653

Abdul Rasib, Amir Hamzah and Wakhi Anuar, Nur Farah Bazilah and Abdullah, Rohana and Noor, R. M. and Mohamad Rafaa, Z. F. (2021) Production Smoothness Improvement Through Arena Application In The Food Manufacturing Industry. Turkish Journal of Computer and Mathematics Education, 12 (3). pp. 3516-3526. ISSN 1309-4653

Ghazali, Ihwan and Abdul-Rashid, Salwa Hanim and Md Dawal, Siti Zawiah and Aoyama, Hideki and Sakundarini, Novita and Ho, Fu Haw and Herawan, Safarudin Gazali (2021) Green Product Preferences Considering Cultural Influences: A Comparison Study Between Malaysia And Indonesia. Management of Environmental Quality: An International Journal, 32 (5). pp. 1040-1063. ISSN 1477-7835

Ghazali, Ihwan and Huda, Abdullah and Abdul-Rashid, Salwa Hanim and Md Dawal, Siti Zawiah and Mohd Shariff, Amir Husni and Herawan, Safarudin Gazali and Ho, Fu Haw and Sakundarini, Novita (2021) Guidelines For Designing Green Products Considering Customers’ Cultural Preferences. Sustainability (Switzerland), 13 (2). pp. 1-27. ISSN 2071-1050

Hamzah, Khairum and Nik Long, Nik Mohd Asri and Senu, Norazak and Eshkuvatov, Zainiddin K. (2021) Numerical solution for the thermally insulated cracks in bonded dissimilar materials using hypersingular integral equations. Applied Mathematical Modelling, 91. pp. 358-373. ISSN 0307-904X (Unpublished)

Ho, Fu How and Ghazali, Ihwan and Abdul-Rashid, Salwa Hanim and Raja Ghazilla, Raja Ariffin and Sakundarini, Novita and Woo, Yoke Ling and Ahmad, Said and Abdul Haq, Reazul Haq (2021) What Key Drivers Are Needed To Implement Material Efficiency Strategies? An Analysis Of The Electrical And Electronic Industry In Malaysia And Its Implications To Practitioners. Sustainability (Switzerland), 13 (4). pp. 1-19. ISSN 2071-1050

Ishak, Anuar and Waini, Iskandar and Alabdulhadi, Sumayyah and Ahmed, Sameh E. (2021) Hybrid Nanofluid Flow And Heat Transfer Past An Inclined Surface. Mathematics, 9 (24). pp. 1-14. ISSN 2227-7390

Ishak, Anuar and Waini, Iskandar and Pop, Ioan (2021) Agrawal Flow Of A Hybrid Nanofluid Over A Shrinking Disk. Case Studies in Thermal Engineering, 25. pp. 1-11. ISSN 2214-157X

Ishak, Anuar and Waini, Iskandar and Pop, Ioan (2021) Flow Towards A Stagnation Region Of A Curved Surface In A Hybrid Nanofluid With Buoyancy Effects. Mathematics, 9 (18). pp. 1-13. ISSN 2227-7390

Ismail, Al Emran and Yaakob, Mohd Yuhazri and Salim Hamza, Sabah and Ariffin, Ahmad Hamdan and Hameed Sultan, Mohamed Thariq (2021) Hybridization Effect On Crashworthiness Parameters Of Natural Composite. Frontiers in Materials, 8. pp. 1-9. ISSN 2296-8016

Jumaidin, Ridhwan and Ghazali, Ihwan and Zakuan, Nur Diyana and Selamat, Mohd Zulkefli and Julmohammad, Norliza and Huda, Nurul and Ilyas, R. A. (2021) Physical Properties Of Thermoplastic Starch Derived From Natural Resources And Its Blends: A Review. Polymers, 13 (9). pp. 5-20. ISSN 2073-4360

Kok, Hoi Ern and Lau, Kok Tee (2021) DSC assessment on curing degree of micron-scaled adhesive layer in lamination-pressed flexible printed circuit panels. Journal of Mechanical Engineering, 18 (3). pp. 131-145. ISSN 1823- 5514

Latif, Kamran and Adam, Anbia and Yusof, Yusri and Abdul Kadir, Aini Zuhra (2021) A Review Of G Code, STEP, STEP-NC, And Open Architecture Control Technologies Based Embedded CNC Systems. International Journal of Advanced Manufacturing Technology, 114 (9-10). pp. 2549-2566. ISSN 0268-3768

Md Arifin, Norihan and Khashi’ie, Najiyah Safwa and Sheremet, Mikhail and Pop, Loan Mihai (2021) Shape Factor Effect Of Radiative CU–AL²O³/H²O Hybrid Nanofluid Flow Towards An EMHD Plate. Case Studies in Thermal Engineering, 26. pp. 1-12. ISSN 2214-157X

Md Nasir, Nur Syuhada and Ab Wahab, Norfariza and Sofian, Badri and Raja Abdullah, Raja Izamshah and Sasahara, Hiroyuki (2021) Experimental Investigations Towards Hole Accuracy In Micro-Drilling Of Carbon Fibre Reinforced Polymer Material. Manufacturing Technology, 21 (3). pp. 381-386. ISSN 1213-2489

Nik Long, Nik Mohd Asri and Hamzah, Khairum and Senu, Norazak and Eshkuvatov, Zainiddin K. (2021) Numerical solution for crack phenomenon in dissimilar materials under various mechanical loadings. Symmetry, 13 (2). pp. 1-20. ISSN 2073-8994

Pop, Ioan and Waini, Iskandar and Ishak, Anuar (2021) Unsteady Hybrid Nanofluid Flow On A Stagnation Point Of A Permeable Rigid Surface. ZAMM Zeitschrift fur Angewandte Mathematik und Mechanik, 101 (6). pp. 1-14. ISSN 0044-2267

Waini, Iskandar and Ishak, Anuar and Pop, Ioan Mihai (2021) MHD Glauert Flow Of A Hybrid Nanofluid With Heat Transfer. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 86 (2). pp. 91-100. ISSN 2289-7879

Yusof, Yusri and Latif, Kamran and Hatem, Noor and A. Kadir, Aini Zuhra and Abedlhafd, Mohammed M. (2021) Optimization And Execution Of Multiple Holes-Drilling Operations Based On STEP-NC. International Journal of Advanced Manufacturing Technology, 114 (7-8). pp. 2031-2043. ISSN 0268-3768

Yusof, Yusri and Latif, Kamran and Hatem, Noor and A. Kadir, Aini Zuhra and Mohammed, M.A (2021) A Novel Integrating Between Tool Path Optimization Using An ACO Algorithm And Interpreter For Open Architecture CNC System. Expert Systems with Applications, 178. pp. 1-19. ISSN 0957-4174