Items where Division is "Faculty Of Mechanical Technology And Engineering" and Year is 2025

Article

Ab Ghani, Ahmad Fuad and Basri, Ahmad Faizal and Hussin, Mohamed Saiful Firdaus and Saleman, Abdul Rafeq and Faishal, Afif (2025) Pareto analysis and failure mode and effect analysis (FMEA) of central Melaka power distribution plant maintenance strategies. Journal of Power and Energy Engineering, 13 (10). pp. 87-110. ISSN 2327-5901

Abd. Latif, Mohd Juzaila and Zahari, Siti Nurfaezah and Zakaria, Mohamad Shukri and Akiah, Masni Azian and Quang, Nguyen Ho and Abdul Kadir, Mohammed Rafiq (2025) Impact of body weight on intervertebral disc: A finite element analysis of lumbar spine total disc replacement. Journal of Mechanical Engineering, 22 (2). pp. 97-110. ISSN 1823-5514

Abdul Rasid, Ahmad Fuad and Badrul Hisham, Syazuan Hykal and Mohd Zamberi, Mahanum and Tamaldin, Noreffendy and Yang, Zhang (2025) Quantitative study on the combustion characteristics of water-in-oil emulsion droplets using high-speed imaging technique. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 130 (2). pp. 42-54. ISSN 2289-7879

Abdullah, Muhammad Ilman Hakimi Chua and Alkahari, Mohd Rizal and Abdollah, Mohd Fadzli and Mohamad Fazdhli, Fawzan Hanafi and Wei, Ignatius Wong Loke and Abdul Khalid, Alif Iqmal and Abdullah, Rohana and Muhamad Damanhuri, Amir Abdullah and Mohamad, Effendi and Puspitasari, Poppy (2025) Impact of geometries on performances and surface morphology of SLS 3D-printed thrust and roller bearings. International Journal of Advanced Technology and Engineering Exploration, 12 (123). pp. 186-200. ISSN 2394-7454

Chi Adam, Mohd Khairil Anbia and Rassem, Hesham Hussein and Al-Bagawi, Amal H. and Khamidun, Mohd Hairul and Y. A. Alanazi, Tahani and Masood, Najat and Y. Rajeh, Sahar and Magam, Sami Muhsen S. (2025) Phytochemical analysis and antioxidant activity assessment of methanolic extract from jasmine flowers. Engineering, Technology & Applied Science Research, 15 (1). pp. 20258-20263. ISSN 1792-8036

Ismail, Ismail and Mutiara, Desti and Rahwanto, Adi and Jalil, Zulkarnain and Fathmiyah, Syarifah and Sheikh Md Fadzullah, Siti Hajar (2025) Effect of filler size on the properties of oil palm empty fruit bunch high-load filler biocomposite. Trends In Sciences, 22 (4). pp. 1-15. ISSN 2774-0226

Khan, Umair and Khashi’ie, Najiyah Safwa and Vinodkumar Reddy, Mulinti and Malleswari, Kakanuti and Ajithkumar, Moorthi and Elkamchouchi, Dalia H. and Ali, Farhan and Nath, Jintu Mani (2025) Aspects of thermal radiation for the second law analysis of magnetized Darcy–Forchheimer movement of Maxwell nanomaterials with Arrhenius energy effects. High Temperature Materials and Processes, 44 (1). pp. 2025-0083. ISSN 0334-6455

Khashi’ie, Najiyah Safwa and Abdollah, Mohd Fadzli bin and Waini, Iskandar and Pop, Ioan (2025) Blasius flow of a ternary hybrid nanofluid over a moving plate. JP Journal of Heat and Mass Transfer, 38 (3). pp. 447-456. ISSN 0973-5763

Khashi’ie, Najiyah Safwa and Badrulhisam, Amirrul Luqman and Mohd Rozi, Nurin Faqira and Hamzah, Khairum and Sayed Nordin, Sayed Kushairi and Irianto (2025) Effect of corncob powder on the mechanical behavior of glass fiber/epoxy hybrid composites. ARPN Journal Of Engineering And Applied Sciences, 20 (10). pp. 567-573. ISSN 1819-6608

Laouer, Abdelghani and Atia, Aissa and Teggar, Mohamed and Arıcı, Müslüm and Mohd Rosli, Mohd Afzanizam (2025) Numerical investigation of various configurations of nano-enhanced latent heat thermal energy storage. International Communications in Heat and Mass Transfer, 168 (109513). pp. 1-14. ISSN 0735-1933 (Submitted)

Maslan, Mohamad Haidir and Sheikh, Mohammad Aslam and Ngatiman, Nor Azazi and Zainal, Nurul Amira and Yahaya, Saifudin Hafiz (2025) Development of predictive finite element models for complete contact fretting fatigue. Journal of Advanced Research in Micro and Nano Engineering, 29 (1). pp. 1-13. ISSN 2756-8210

Mat Tokit, Ernie and Yusoff, Mohd Zamri and Herawan, Safarudin Gazali (2025) Comparative analysis of flow dynamics studies between the straight and interrupted minichannel heat sink. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 130 (2). pp. 196-124. ISSN 2289-7879

Md Fahmi, Abd Samad and Zainal, Zairulazha and Jamaluddin, Hishamuddin (2025) Significance of teaching of microcomputer technology through practical robotic ground vehicle application. SN Computer Science, 6 (629). pp. 1-9. ISSN 2662-995X

Misha, Suhaimi and Hashem Salem Almshwali, Eslam Ahmed and Mohd Rosli, Mohd Afzanizam and Haminudin, Nor Faizah and Mohd Sa'at, Fatimah Al-Zahrah and Abdul Munir, Fudhail and Ali Al-Abidi, Abduljalil (2025) Review on the air temperature and humidity produce by solar dryer and potential to be reused. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 125 (1). pp. 57-74. ISSN 2289-7879

Mohd Hafidzal, Mohd Hanafi and Adnan, Nor Najiha and Razak, Nurul Hanim and Md Yusof, Fahmi Asyadi and Suhaimy, Syazwan Hanani Meriam and Grasianto (2025) Study on mechanical and thermal properties of plasticizer with epoxidation waste cooking oil. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 125 (1). pp. 34-41. ISSN 2289-7879

Mohd Rosli, Mohd Afzanizam and Cheah, Kai Xiang and Probowo and Herawan, Safarudin Gazali and Teggar, Mohamed and Mitan, Nona Merry Merpati (2025) Numerical investigation on photovoltaic thermal panel using various nanofluids concentrations. CFD Letters, 17 (4). pp. 66-88. ISSN 2180-1363

Mohd Rosli, Mohd Afzanizam and Chia, Zhi Horng and Ponnaiyan, Jayaprakash and Salimen, Nurfarhana and Herawan, Safarudin Gazali and Hussain, Faridah and Abdul Rashid, Azrin Hani (2025) Latent heat validation of phase change material using t-history method. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 127 (2). pp. 249-261. ISSN 2289-7879

Mohd Rosli, Mohd Afzanizam and Low, Zi Qing and Salimen, Nurfarhana and Abdul Rashid, Azrin Hani and Herawan, Safarudin Gazali (2025) Assessment of photovoltaic thermal efficiency using phase change material and water-channel collector with T-fin design. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 125 (1). pp. 75-93. ISSN 2289-7879

Mohd Shah, Hairol Nizam and Alshami, Abdallah M. M. and Abdollah, Mohd Fairus and Ab Rashid, Mohd Zamzuri and Arshad, Mohd Ali (2025) A pothole boundary detection algorithm using image segmentation technique in urban road. Journal of Advanced Research Design, 132 (1). pp. 66-77. ISSN 2289-7984

Nik Ghazali, Nik Nazri and Badruddin, Irfan Anjum and Abdul Latif, Mohd Faruq and Abdullah, Mohd Faris and Ibrahim, Norliza and Mohd Razi, Roziana and Tuan Ya, Tuan Mohammad Yusoff Shah and Badruddin, Irfan Anjum and Kamangar, Sarfaraz and Zedan, ASA and Khan, Abdul Azeem (2025) Upper airways modelling and validation of mandibular advancement surgery. Bio-Medical Materials and Engineering, 36 (5). pp. 1-14. ISSN 1878-3619

Nik Ghazali, Nik Nazri and Badruddin, Irfan Anjum and Rozali, Shaifulazuar and Abdul Latif, Mohd Faruq and Kamangar, Sarfaraz (2025) Evaluation of mandibular advancement surgery efficacy in treating obstructive sleep apnea: A study on turbulence kinetic energy. Computer Methods and Programs in Biomedicine, 261. pp. 1-21. ISSN 0169-2607

Nuawi, Mohd Zaki and Othman, Muhammad Nur and Ngatiman, Nor Azazi and Yusri, Muhammad Yuszairie (2025) Novel Z-Chart for predicting insufficient oil of automotive belt-driven air conditioning compressor. Jurnal Kejuruteraan, 37 (4). pp. 2003-2014. ISSN 0128-0198

Phuman Singh, Amrik Singh and Leong Zhin, Adam Puah and Mat Darus, Intan Zaurah (2025) Trajectory tracking using optimal tyre force distribution for obstacle avoidance. International Journal of Vehicle Autonomous Systems, 18 (2). pp. 163-189. ISSN 1471-0226

Rahmat, Mohd Sabirin and Ahmad, Fauzi and Aparow, Vimal Rau and Ramli, Rizauddin and Mohamed Haris, Sallehuddin and Mohd Sabri, Mohd Anas and Meor Ahmad, Meor Iqram and Mustafa, Mohd Muhyidin (2025) Predictive performance of anti-lock braking system with PID controller optimized by gravitational search algorithm for a quarter car model: Simulation modeling and control. Automotive Experiences, 8 (1). pp. 19-31. ISSN 2615-6202

Razak, Nurul Hanim and Mohd Aseri, Muhamad Alif Haikal and Chuah Abdullah, Luqman and Fazli, Iffa Farais and Mohd Hafidzal, Mohd Hanafi (2025) Sustainable PLA/EFB biocomposites advanced with green plasticisers enhancing mechanical and structural integrity. Chemical Engineering Transactions, 122. pp. 505-510. ISSN 2283-9216

Razali, Nadlene and Norhazlin, Nur Batrisyia and Shaharuzaman, Mohd Adrinata and Mustafa, Zaleha and Sheikh Md Fadzullah, Siti Hajar and Rashid, Bushra (2025) The effect of fibre loadings on the mechanical and thermal properties of sugar palm/waste tyre rubber reinforced polylactic acid hybrid composites via fused deposition modelling. Journal of Advanced Research Design, 133 (1). pp. 44-59. ISSN 2289-7984

Salim, Mohd Azli and Mohammad Noor, Norida and Masripan, Nor Azmmi and Photong, Chonlatee and Chew, Kit Wayne and Watson, Alan (2025) Cyclic effect on highly thermal hybrid nano-graphene conductive ink. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 127 (1). pp. 106-121. ISSN 2289-7879

Samuel, Joseph and Kaisan, Muhammad Usman and Sanusi, Yinka Sofihullahi and Aliyu, Abdulkabir and Experience, Akhigbe Efeosa (2025) Comparative studies of the tribological characteristics of conventional SAE 40 and blended SAE 40 lubricants. Progress in Engineering Science, 2 (100112). pp. 1-12. ISSN 2950-4252

Sim, Galvin Siang Lin and Appu, Tharani Elancovan and Baskaran, Vasunthra and Goh, Valentina Pui Nee and Tee, Yu Jie and Wong, Qiao Wen and Muhamad Halil, Mohd Haikal and Noorani, Tahir Yusuf and Abd Aziz, Mohd Syafiq (2025) Physicochemical properties of a novel experimental alginic acid-enhanced bioceramic-based root canal sealer: A comparative in vitro evaluation. Journal of Conservative Dentistry and Endodontics, 28 (7). pp. 654-662. ISSN 2950-4716

Sim, Galvin Siang Lin and Muhamad Halil, Mohd Haikal and Lestari, Widya and Abd Aziz, Mohd Syafiq (2025) Scoping review on the genotoxicity of silver nanoparticles in endodontics: Therapeutic saviors or genetic saboteurs? Odontology, 113. pp. 457-465. ISSN 1618-1247

Sudin, Mohd Nizam and Saleman, Abdul Rafeq and Md Daud, Nazri and Zakaria, Kamarul Ariffin and Abdul Munir, Fudhail (2025) Experimental analysis of color influence on optimized FDM parameters for PLA using the Taguchi method. Jurnal Kejuruteraan, 37 (6). pp. 2739-2748. ISSN 0128-0198

Sukri, Mohamad Firdaus and Mohd Tahir, Musthafah and Jali, Mohd Hafiz and Abdul Kadir, Aida Fazliana and Sulaima, Mohamad Fani (2025) Building power demand and energy consumption forecasting using a data-driven model: A case study in a student hostel. International Energy Journal, 25 (1). pp. 41-54. ISSN 1513-718X

Zainal, Nurul Amira and Zuberi, Haris Alam and Lal, Madan and Singh, Amol and Chamkha, Ali J. (2025) Numerical simulation of blood flow dynamics in a stenosed artery enhanced by copper and alumina nanoparticles. Computer Modeling in Engineering and Sciences, 142 (2). pp. 1839-1864. ISSN 1526-1492

Zainulabidin, Muhd. Hafeez and Zainudin, Danial Iskandar and Kamarudin, Kamarul-Azhar and Hassan, Suhaimi and Ramlan, Roszaidi and Ikhsan, Mohamad Shah and Maulana, Yudi (2025) Validation of noise barrier insertion loss simulation in reducing road traffic noise by site measurement data. Journal of Advanced Research in Applied Mechanics, 125 (1). pp. 174-184. ISSN 2289-7895 (In Press)

Zakaria, Mohamad Shukri and Tee, Boon Tuan and Rosman, Fezri Amri and Abdullah, Haslina and Herawan, Safarudin Ghazali (2025) Reducing lithium-ion battery temperature in electric vehicles with vortex generators: A CFD approach. CFD Letters, 17 (8). pp. 27-40. ISSN 2180-1363

Zakaria, Mohamad Shukri and Zahari, Zulfaqar and Abdullah, Haslina and Basri, Adi Azriff and Abd. Latif, Mohd Juzaila (2025) Aerodynamic analysis of plain flap integration in vertical axis wind turbines using CFD at different tip speed ratios. Journal Of Engineering Science And Technology, 20 (4). pp. 1012-1025. ISSN 1823-4690

Zulkarnain, Muhammad and Harny, Irianto and Muhamad Damanhuri, Amir Abdullah (2025) Interphase investigation of modified McLachlan model and the 3D finite element method for electrical conductivity. Heliyon, 11 (1). pp. 1-15. ISSN 2405-8440

Book

Ibrahim, Asriana (2025) Ultrasonic testing practical module : Thickness measurement (Olympus Epoch 650). Penerbit UTeM Press, Durian Tunggal, Melaka. ISBN 9786297784076

Mohd Rosli, Mohd Afzanizam (2025) Pengenalan bahan berubah fasa dalam bidang kejuruteraan. Penerbit UTeM Press, Durian Tunggal, Melaka. ISBN 9786297741161

Thesis

Abu Zaki, Muhammad Syafiq Syazwan (2025) The development of framework for a lightweight metallic drone frame using selective laser melting (SLM) 3D printing machine. Masters thesis, Universiti Teknikal Malaysia Melaka.

Arbain, Nurul Afiqah (2025) Investigation on physical, mechanical and wettability properties of 3D printed polyamide-12 membrane. Masters thesis, Universiti Teknikal Malaysia Melaka.

Che Hamid, Hazliza Aida (2025) Material selection, characterization, optimization, and usability of bio-composites using fused deposition modelling. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Hamdi, Muhammad Haziq (2025) Model reference adaptive control based mopid controller for independent steer-by-wire system. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohamad, Nurul Nadia (2025) Mechanical and physical properties of polylactic acid based composite filament using statistical analysis in fused deposition modelling. Masters thesis, Universiti Teknikal Malaysia Melaka.

Norhazlin, Nur Batrisyia (2025) Performance analysis of PLA based hybrid filament composites reinforced with SPF/WTR for 3D printing. Masters thesis, Universiti Teknikal Malaysia Melaka.

Rayhan, Muhammad Arif (2025) Correlation study between plate thickness of pipe saddle support and pipe loading. Masters thesis, Universiti Teknikal Malaysia Melaka.

Sharif, Emy Aqillah (2025) Effect of hotpress tool temperature on physical, thermal, and mechanical properties of polyphenylene sulfide composite. Masters thesis, Universiti Teknikal Malaysia Melaka.

Zaiham, Nur Afiqah Aina (2025) Streaming in oscillatory flow through porous channels in thermoacoustics. Masters thesis, Universiti Teknikal Malaysia Melaka.