Items where Division is "Faculty of Mechanical Engineering" and Year is 2021

Abd Samad @ Mahmood, Md Fahmi and Zainuddin, Farah Ayiesya (2021) A mating technique for various crossover in genetic algorithm for optimum system identification. International Review of Mechanical Engineering, 15 (11). pp. 574-581. ISSN 1970 - 8734

Abd. Latif, Mohd Juzaila and Suarin, Mohd Azizan and Zakaria, Mohamad Shukri and Harun, Muhamad Noor and Nguyen, H.Q. (2021) Effects Of Total Disc Replacement On Range Of Motion And Facet Stress In Lumbar Spine Using A Finite Element Analysis. International Journal of Nanoelectronics and Materials, 14 (SI). pp. 263-274. ISSN 1985-5761

Abdollah, Mohd Fadzli and Amiruddin, Hilmi and Nordin, Mohamad Jabbar (2021) Effect Of Fibre Length And Composition On The Tribological Attributes Of Oil Palm Fibre Polymeric Composite: Organic Brake Friction Material. Industrial Lubrication and Tribology, 73 (4). pp. 614-620. ISSN 0036-8792

Abdul Halim, Abdul Qayyum and Tee, Boon Tuan and Wan Mat Zain, Wan Shah Waliallah (2021) Face Bypass Damper Application To Overcome Air Conditioning Oversizing Issue. Evergreen, 8 (3). pp. 686-692. ISSN 2189-0420

Abdul Hamid, Nurfaizey and Akop, Mohd Zaid and Masripan, Nor Azmmi and Wasbari, Faizil and Abdul Munajat, Nurain and Mohamad Wazir, Azmil Arif and Jaafar, Juhana and Othman, ‎Mohd Hafiz Dzarfan and Tucker, Nick (2021) Determination of optimal electrospinning distance and applied voltage for polyacrylonitrile electrospun fibre production. International Journal of Nanoelectronics and Materials, 14 (SI). pp. 201-212. ISSN 1985-5761

Abdul Hamid, Nurfaizey and Mansor, Muhd Ridzuan and Mohamad Wazir, Azmil Arif and Nassiruddin, Muhammad Amirul Adli and Noordin, Aminurrashid and Tucker, Nick (2021) Design and development of domestic cyclone dust collector system using TRIZ and CCD method. International Journal of Nanoelectronics and Materials, 14 (SI). pp. 177-190. ISSN 1985-5761

Abdul Hamid, Nurfaizey and Mustafa, Zaleha and Mohamad Wazir, Azmil Arif and Razali, Nadlene and Jaafar, Juhana and Tucker, Nick (2021) Investigation on fibre diameter, wettability and tensile behaviour of electrospun polyacrylonitrile nanofibres. International Journal of Nanoelectronics and Materials, 14 (SI). pp. 213-224. ISSN 1985-5761

Abdul Hamid, Nurfaizey and Salim, Mohd Azli and Md. Saad, Adzni and Mohd Rosli, Mohd Afzanizam and Abdul Munajat, Nurain and Esa, Siti Rahmah and Tucker, Nick (2021) Preparation, characterization, and electrical conductivity investigation of multi-walled carbon nanotube-filled composite nanofibres. International Journal of Nanoelectronics and Materials, 14 (SI). pp. 191-200. ISSN 1985-5761

Abdul Munir, Fudhail and Musthafah, Mohd Tahir and Mohd Ridzuan Tan, Nurfarah Diana and Saputro, Herman and Mikami, Masato (2021) Preliminary Investigation Of Using DBD Plasma For Application In Micro Combustors. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 82 (1). pp. 105-112. ISSN 2289-7879

Abdullah, Muhammad Ilman Hakimi Chua and Abdollah, Mohd Fadzli and Tamaldin, Noreffendy and Amiruddin, Hilmi and Ramli, Faiz Redza and Mohamad Norani, Mohamad Nordin (2021) Mechanical And Tribological Properties Of FFF 3D-Printed Polymers: A Brief Review. Jurnal Tribologi, 29. pp. 11-30. ISSN 2289-7232

Abdullah, Norli and Mohamad, Imran Syakir and N.M., Nurazzi and M.M., Harussani and N.D., Siti Zulaikha and A.H., Norhana (2021) Composites Based On Conductive Polymer With Carbon Nanotubes In DMMP Gas Sensors – An Overview. Polimery/Polymers, 66 (2). pp. 85-97. ISSN 0032-2725

Abdullah, Norli and Mohamad, Imran Syakir and N.M., Nurazzi and S.Z.N., Demon and N.A., Halim (2021) Carbon Nanotubes-Based Sensor For Ammonia Gas Detection – An Overview. Polimery/Polymers, 66 (3). pp. 175-186. ISSN 0032-2725

Abdullah, Norli and Norizan, Mohd Nurazzi and Ngah Demon, Siti Zulaikha and Abdul Halim, Norhana and Mohd Azmi, Ahmad Farid and Victor Ernest, Victor Feizal Knight and Mohamad, Imran Syakir (2021) The frontiers of functionalized graphene-based nanocomposites as chemical sensors. Nanotechnology Reviews, 10 (1). pp. 330-369. ISSN 2191-9097

Ahmad, Fauzi and Haris, Sharil Izwan and Mat Yamin, Ahmad Kamal and Che Hasan, Mohd Hanif and Mat Nuri @ Md Din, Nur Rashid (2021) Self Tuning PID Control Of Antilock Braking System Using Electronic Wedge Brake. International Journal of Automotive and Mechanical Engineering, 18 (4). pp. 9333-9348. ISSN 2229-8649

Akop, Mohd Zaid and Jikol, Favian and Salim, Mohd Azli and Mohamed Arifin, Yusmady (2021) A study of steady-state thermal distribution on circular plate using ANSYS. International Journal of Nanoelectronics and Materials, 14 (SI). pp. 479-488. ISSN 1985-5761

Akop, Mohd Zaid and Lai, Tian Wei and Salim, Mohd Azli and Mohd Rosli, Mohd Afzanizam and Abdul Hamid, Nurfaizey and Mansor, Muhd Ridzuan and Md. Saad, Adzni and Mohamed Arifin, Yusmady and Herawan, Safarudin Gazali (2021) A Simulation Study On Performance Of Photovoltaic Thermal Water (PVTW) Collector Under Different Loading Of Mass Flow Rate Using ANSYS Fluent. International Journal of Nanoelectronics and Materials, 14 (SI). pp. 467-478. ISSN 1985-5761

Akop, Mohd Zaid and Shehab, Salem Saleh Omar and Mohamed Arifin, Yusmady and Salim, Mohd Azli and Masripan, Nor Azmmi and Abdul Hamid, Nurfaizey and Wasbari, Faizil and Md. Saad, Adzni and Herawan, Safarudin Gazali (2021) An experimental study on effect of light intensity to indoor air temperature and humidity. International Journal of Nanoelectronics and Materials, 14 (SI). pp. 457-466. ISSN 1985-5761

Al-Mola, Mohammed Hussin Ahmed and Salim, Mohd Azli and Mailah, Musa (2021) Applying active force control with fuzzy self-tuning PID to improve the performance of an antilock braking system. International Journal of Nanoelectronics and Materials, 14 (SI). pp. 489-501. ISSN 1985-5761

Alkahari, Mohd Rizal and Abdollah, Mohd Fadzli and Ramli, Faiz Redza and Rosli, Nor Ana and Maidin, Shajahan and Herawan, Safarudin Gazali (2021) Review On Effect Of Heat Input For Wire Arc Additive Manufacturing Process. Journal of Materials Research and Technology, 11. pp. 2127-2145. ISSN 2238-7854

Amiruddin, Hilmi and Abdollah, Mohd Fadzli and Azmi, Muhammad Alif and Mat Tahir, Noor Ayuma (2021) Lubrication Mechanisms Of Hexagonal Boron Nitride Nano-Additives Water-Based Lubricant For Steel-Steel Contact. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 235 (5). pp. 1038-1046. ISSN 1350-6501

Dhar Malingam, Sivakumar and Mohd Ishak, Noordiana and Mansor, Muhd Ridzuan and Razali, Nadlene and Mustafa, Zaleha and Ab Ghani, Ahmad Fuad (2021) Investigation of natural fibre metal laminate as car front hood. Materials Research Express, 8 (2). pp. 1-8. ISSN 2053-1591

Dhar Malingam, Sivakumar and Ng, Lin Feng and Kamarolzaman, Anita Akmar and Hong, Tzy Yi and Ab Ghani, Ahmad Fuad (2021) Mechanical characterisation of woven kenaf fabric as reinforcement for composite materials. Journal of Natural Fibers, 18 (5). pp. 653-663. ISSN 1544-0478

Fu, Zinvi and Jamaludin, Zamberi and Bani Hashim, Ahmad Yusairi and Mohamad, Imran Syakir (2021) Review on EMG acquisition and classification techniques: Towards zero retraining in the influence of user and arm position independence. International Journal of Integrated Engineering, 13 (4). pp. 1-15. ISSN 2229-838X

Hashim, Haslenda and Razak, Nurul Hanim and Yunus, Nor Alafiza (2021) Reducing Diesel Exhaust Emissions By Optimisation Of Alcohol Oxygenates Blend With Diesel/Biodiesel. Journal of Cleaner Production, 316. pp. 1-15. ISSN 0959-6526

Ismail, Rainah and Abdollah, Mohd Fadzli and Azmi, Muhamad Syafwan (2021) Lattice Structure Design Parameters Optimization For The Structural Integrity Of Passive Vibration Isolator. Manufacturing Technology, 21 (6). pp. 736-748. ISSN 1213-2489

Ismail, Rainah and Putra, Azma and Azmi, Muhamad Syafwan and Nurdin, Muhammad Nasruddin (2021) Numerical Analysis On Static And Dynamic Behavior Of Additively Manufactured BCC Lattice Structures. Journal of Mechanical Engineering Research and Developments, 44 (5). pp. 75-86. ISSN 1024-1752

Jasmee, Solehah and Omar, Ghazali and Che Othaman, Siti Syahirah and Kamarolzaman, Anita Akmar and Masripan, Nor Azmmi and A. Hamid, Husna (2021) Preparation of GNPs thermally conductive adhesive at different epoxy resin/curing agent ratio and mixing method. International Journal of Nanoelectronics and Materials, 14 (SI). pp. 159-176. ISSN 1985-5761

Jumaidin, Ridhwan and Alamjuri, Roziela Hanim and Zakuan, Nur Diyana and Selamat, Mohd Zulkefli and Md Yusof, Fahmi Asyadi (2021) Extraction and characterization of natural cellulosic fiber from Pandanus Amaryllifolius leaves. Polymers, 13 (23). pp. 1-16. ISSN 2073-4360

Jumaidin, Ridhwan and Zakuan, Nur Diyana and Selamat, Mohd Zulkefli and Mohd Suan, Mohd Shahadan (2021) Thermoplastic starch/beeswax blend: characterization on thermal mechanical and moisture absorption properties. International Journal of Biological Macromolecules, 190. pp. 224-232. ISSN 0141-8130

Karjanto, Juffrizal and Md. Yusof, Nidzamuddin and Azmi, Mohd Shafiq Ikhwan and Hassan, Muhammad Zahir and Zulkifli, Abd Fathul Hakim and Mohamed Nazar, Mohamed Ihsan Sabri and Ab Rashid, Ahmad Azad and Mohd Jawi, Zulhaidi and Abu Kassim, Khairil Anwar (2021) The development of an automated vehicle simulator for on-road study. Journal of the Society of Automotive Engineers Malaysia, 5 (2). pp. 235-243. ISSN 2550-2239

Kasni Sumeru and Hikmat, Yudi Prana and Ismail Wellid and Salma Dzakiyah AZ-zahro and Sukri, Mohamad Firdaus (2021) Relationship Between Indoor Air Quality And Sick Building Syndrome In Post Office Building In Bandung. International Journal Of Applied Technology Research, 2 (2). pp. 136-145. ISSN 2721-7582

Masripan, Nor Azmmi and Salim, Mohd Azli and Lin, Soong Jin and Mansor, Muhd Ridzuan and Akop, Mohd Zaid and Abdul Hamid, Nurfaizey and Wasbari, Faizil and Noordin, Aminurrashid (2021) Effect Of Stretchable Conductive Ink (SCI) On Electrical Conductivity Under Tensile Stress. International Journal of Nanoelectronics and Materials, 14 (SI). pp. 429-437. ISSN 1985-5761

Mat Tokit, Ernie and Ng, Angie and Mohd Saat, Fatimah Al Zahrah and Abd Rahman, Norasra and Shikh Anuar, Fadhilah and M. Mitan, Nona Merry (2021) A Preliminary Conceptual Design Approach Of Food Waste Composter Design. Evergreen, 8 (2). pp. 397-407. ISSN 2189-0420

Misha, Suhaimi and Mohd Rosli, Mohd Afzanizam and Yusof, Ahmad Anas and Ramli, Muhammad Safwan Asyraf and Haminudin, Nor Faizah and Md Basar, Mohd Farriz and Sopian, Kamaruzzaman and Ibrahim, Adnan and Abdullah, Ahmad Fazlizan (2021) Review Of Desiccant In The Drying And Air-Conditioning Application. International Journal of Heat and Technology, 39 (5). pp. 1475-1482. ISSN 0392-8764

Mo, Kim Hung and Othman, Muhammad Nur and Putra, Azma and Leong, Geok Wen and Chin, Tze Ming and Ibrahim, Zainah (2021) Incorporation Of Crumb Rubber And Air-Entraining Agent In Ultra-Lightweight Cementitious Composite: Evaluation Of Mechanical And Acoustic Properties. Journal of Building Engineering, 42. pp. 1-7. ISSN 2352-7102

Mo, Kim Hung and Othman, Muhammad Nur and Putra, Azma and Shah, Syed Nasir and Yap, Soon Poh (2021) Assessment Of Lightweight Recycled Crumb Rubber-Cement Composite Produced By Preplaced Method. Advances in Concrete Construction, 11 (5). pp. 409-417. ISSN 2287-5301

Mohd Daud, Mohd Ahadlin and Zakaria, Kamarul Ariffin and Selamat, Mohd Zulkefli and Dhar Malingam, Sivakumar and Ab Ghani, Ahmad Fuad and Thirukumaran, Manoharan (2021) The effect of pineapple leaf fiber as a filler in polymer matrix composite for interior part in automotive. International Journal of Nanoelectronics and Materials, 14 (SI). pp. 363-372. ISSN 1985-5761

Mohd Hanafi, Mohd Hafidzal and Ab Razak, Nurul Afwanisa` and Razak, Nurul Hanim and Ibrahim, Asriana and Omar, Anis Ainaa (2021) The effective polycyclic aromatic hydrocarbons removal from waste cooking oils: the best evidence review. Chemical Engineering Transactions, 89. pp. 475-480. ISSN 2283-9216

Mohd Rosli, Mohd Afzanizam and Nawam, Muhammad Zaid and Suhaimi, Misha and Roslizar, Aiman and Abdul Hamid, Nurfaizey and Loon, Yew Wai and Hussain, Faridah and Herawan, Safarudin Gazali and Arifin, Zainal (2021) Validation Study Of Photovoltaic Thermal Nanofluid Based Coolant Using Computational Fluid Dynamics Approach. CFD Letters, 13 (3). pp. 58-71. ISSN 2180-1363

Mohd Rosli, Mohd Afzanizam and Saadun, Mohd Noor Asril and Latif, Irfan Alias Farhan and Nawam, Muhammad Zaid and Jarimi, Hasila and Sharif, Mohd Khairul Anuar and Ali, Sulaiman (2021) A Simulation Study On Temperature Uniformity Of Photovoltaic Thermal Using Computational Fluid Dynamics. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 82 (1). pp. 21-38. ISSN 2289-7879

Mohd Saat, Fatimah Al Zahrah and Almukhtar Allafi, Waleed and Mao, Xiaoan (2021) Fluid Dynamics Of Oscillatory Flow Across Parallel-Plates In Standing-Wave Thermoacoustic System With Two Different Operation Frequencies. Engineering Science And Technology, An International Journal, 24 (1). pp. 41-49. ISSN 2215-0986

Mohd Saat, Fatimah Al Zahrah and Hasbullah, Nurjannah and Shikh Anuar, Fadhilah and Sukri, Mohamad Firdaus and Johari, Dahlia (2021) Temperature And Velocity Changes Across Tube Banks In One-Directional And Bi-Directional Flow Conditions. Evergreen, 8 (2). pp. 428-437. ISSN 2189-0420

Mohd Saat, Fatimah Al Zahrah and Hew, Wei Ren and Shikh Anuar, Fadhilah and Mat Tokit, Ernie and Abdul Wahap, Mohd Arizam and Tee, Boon Tuan (2021) Computational Fluid Dynamics Study Of Wake Recovery For Flow Across Hydrokinetic Turbine At Different Depth Of Water. CFD Letters, 13 (2). pp. 62-76. ISSN 2180-1363

Mohd Saat, Fatimah Al Zahrah and Sukri, Mohamad Firdaus and Shikh Anuar, Fadhilah and Akop, Mohd Zaid and Lin, Chou Aw and Abdul Manan, Zainuddin (2021) Heat Transfer Across Tube Banks With A Passive Control Vortex Generator In Steady One-Directional And Oscillatory Flows. CFD Letters, 13 (1). pp. 1-18. ISSN 2180-1363

Mohd-Ghazali, Normah and Mohd Sa'at, Fatimah Al-Zahrah and Roslan, Muhammad Nazmi Hadi and Zolpakar, Nor Atiqah (2021) Analysis Of 3D Printed Stack In Thermoacoustic Cooling. Evergreen, 8 (1). pp. 131-137. ISSN 2189-0420

Monazzam, Mohammadreza and Putra, Azma and Abdi, Debelo Dugasa and Taban, Ebrahim and Golbabaei, Farideh and Khadem, Monireh (2021) Sound Absorption Performance Of Natural Fiber Composite From Chrome Shave And Coffee Silver Skin. Applied Acoustics, 182. pp. 1-10. ISSN 0003-682X

Ng, Lin Feng and Dhar Malingam, Sivakumar and Chen, Wei Ping (2021) Mechanical characterisation of kenaf/PALF reinforced composite-metal laminates: effects of hybridisation and weaving architectures. Journal of Reinforced Plastics and Composites, 40 (5-6). pp. 193-205. ISSN 0731-6844

Norli, Abdullah and Norizan, Mohd Nurazzi and Ngah Demon, Siti Zulaikha and Abdul Halim, Norhana and Mohamad, Imran Syakir (2021) The influence of reaction time on non-covalent functionalisation of P3HT/MWCNT nanocomposites. Polymers, 13 (12). pp. 1-17. ISSN 2073-4360

Omar, Ghazali and Ahmad, Intan Fatihah and A Hamid, Husna and Salim, Mohd Azli (2021) Effect Of Carbon Nanotube On Microstructure And Hardness Of Sn96.5Ag3.0Cu0.5 Solder For Microelectronic Packaging. International Review of Mechanical Engineering, 15 (7). pp. 346-354. ISSN 1970 - 8734

Omar, Ghazali and Esa, Siti Rahmah and Sheikh Md Fadzullah, Siti Hajar and Siow, Kim Shyong and Abdul Rahim, Bazura (2021) The evolutions of microstructure in pressureless sintered silver die attach material. International Journal of Nanoelectronics and Materials, 14 (2). pp. 179-194. ISSN 1985-5761

Omar, Ghazali and Masripan, Nor Azmmi and A. Hamid, Husna and Che Othaman, Siti Syahirah and Jasmee, Solehah (2021) Interface Thermal Resistance And Thermal Conductivity Of Polymer Composites At Different Types, Shapes, And Sizes Of Fillers: A Review. Polymer Composites, 42 (6). pp. 2629-2652. ISSN 0272-8397

Phuman Singh, Amrik Singh and Putra, Azma and Abu Kassim, Khairil Anwar (2021) Time To Collision For Emergency Obstacle Avoidance. Journal of the Society of Automotive Engineers Malaysia, 5 (2). pp. 223-234. ISSN 2600-8092

Putra, Azma and Wan Mohamad, Wan Mohd Farid and Al Munawir and Herawan, Safarudin (2021) Corrected Statistical Energy Analysis Model In A Non-Reverberant Acoustic Space. Sound and Vibration, 55 (3). pp. 203-219. ISSN 1541-0161

Razak, Nurul Hanim and Hashim, Haslenda and Yunus, Nor Alafiza and Klemeš, Jiří Jaromír (2021) Biorefinery Localization Using Analytical Hierarchy Process. Chemical Engineering Transactions, 89. pp. 589-594. ISSN 2283-9216

Razak, Nurul Hanim and Hashim, Haslenda and Yunus, Nor Alafiza and Klemeš, Jiří Jaromír (2021) Integrated GIS-AHP Optimization For Bioethanol From Oil Palm Biomass Supply Chain Network Design. Chemical Engineering Transactions, 83. pp. 571-576. ISSN 2283-9216

Razali, Nadlene and Dhar Malingam, Sivakumar and Jamadi, Aida Haryati and Mohammad Taha, Mastura and Lazim, Yusriah and Rushdan, Ahmad Ilyas (2021) Natural fibre filament for Fused Deposition Modelling (FDM): a review. International Journal of Sustainable Engineering, 14 (6). pp. 1988-2008. ISSN 1939-7038

Saleman, Abdul Rafeq and Zakaria, Mohamad Shukri and Jumaidin, Ridhwan and Maslan, Mohd Nazmin (2021) Ultra-thin liquid film with shear and the influences on thermal energy transfer at solid–liquid interfaces of simple liquid methane in contact with (110) surface structure of face-centred cubic lattice (FCC). Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 87 (3). pp. 21-30. ISSN 2289-7879

Salim, Mohd Azli and Ab Wahid, Ameeruz Kamal and Masripan, Nor Azmmi and Md. Saad, Adzni and Ali, Murni and Dai, Feng (2021) Measurement of optimal stretchability graphene conductive ink pattern by numerical analysis. Defence S and T Technical Bulletin, 14 (1). pp. 43-54. ISSN 1985-6571

Salim, Mohd Azli and Ab Wahid, Ameeruz Kamal and Masripan, Nor Azmmi and Md. Saad, Adzni and Photong, Chonlatee (2021) Comparison measurements of low resistance and high strength on synthesis graphene conductive ink filled epoxy. International Journal of Nanoelectronics and Materials, 14 (SI). pp. 333-342. ISSN 1985-5761

Salim, Mohd Azli and Hosnie, Aina Natasha and Masripan, Nor Azmmi and Md. Saad, Adzni and Sudin, Mohd Nizam and Naroh, Azmi and Feng, Dai (2021) Characterisation of mechanical-electrical properties of graphene nanoplatelets filled epoxy as conductive ink in various patterns. International Journal of Nanoelectronics and Materials, 14 (SI). pp. 439-456. ISSN 1985-5761

Salim, Mohd Azli and Masripan, Nor Azmmi and Md. Saad, Adzni and Ab Wahid, Ameeruz Kamal and Ali, Murni and Al-Mola, Mohammed Hussin A. (2021) The Effect Of Curing Time On Electrical Resistivity, Mechanical Characteristics And Microstructure Behavior Of Graphene Conductive Ink. International Journal of Nanoelectronics and Materials, 14 (SI). pp. 373-386. ISSN 1985-5761

Salim, Mohd Azli and Masripan, Nor Azmmi and Md. Saad, Adzni and Abdul Hamid, Nurfaizey and Feng Dai and Mohd Yusof, Norbazlan (2021) Prediction Of Basic And Circular Vibration Isolator In High Frequencies Using Malaysian Natural Rubber For Highway C2L Machine. International Journal of Nanoelectronics and Materials, 14 (SI). pp. 241-262. ISSN 1985-5761

Salim, Mohd Azli and Masripan, Nor Azmmi and Md. Saad, Adzni and Dai, Feng and Noordin, Aminurrashid and Mohd Yusof, Norbazlan (2021) Mathematical modelling of passive discrete lumped parameter system using standard Malaysian rubber constant viscosity. International Journal of Nanoelectronics and Materials, 14 (SI). pp. 289-310. ISSN 1985-5761

Salim, Mohd Azli and Md. Saad, Adzni and Abdullah, Siti Amirah and Wasbari, Faizil and Ali, Murni and Feng Dai (2021) Geometrical Characterization And Effect Of Temperature On Graphene Nanoparticles Conductive Ink. International Journal of Nanoelectronics and Materials, 14 (SI). pp. 275-287. ISSN 1985-5761

Salim, Mohd Azli and Md. Saad, Adzni and Ahmad, Fauzi and Akop, Mohd Zaid and Al-Mola, Mohammed Hussin A. and Saad, Hartini (2021) Effect of the different printing patterns of graphene nanoparticles in conductive ink on electrical and mechanical performance. International Journal of Nanoelectronics and Materials, 14 (SI). pp. 225-240. ISSN 1985-5761

Salim, Mohd Azli and Md. Saad, Adzni and Ahmad, Fauzi and Hamidi, Roshidah and Ali, Murni and Dai, Feng (2021) Electrical, morphological and surface roughness analysis of silver nanoparticles-filled epoxy conductive ink. Defence S and T Technical Bulletin, 14 (2). pp. 123-134. ISSN 1985-6571

Salim, Mohd Azli and Md. Saad, Adzni and Akop, Mohd Zaid and Photong, Chonlatee and Md. Zain, Mohd Zarhamdy and Abu Bakar, Abd Rahim and Mohd Yusof, Norbazlan (2021) Modelling and estimation on vibration and noise level of the dynamic wiper system using input shaping strategy. International Journal of Nanoelectronics and Materials, 14 (SI). pp. 311-332. ISSN 1985-5761

Salim, Mohd Azli and Mokhlis, Maizura and Masripan, Nor Azmmi and Md. Saad, Adzni and Sudin, Mohd Nizam and Dai, Feng and Naroh, Azmi (2021) Characterisation of mechanical-electrical properties of graphene nanoplatelets filled epoxy as conductive ink. Defence S and T Technical Bulletin, 14 (1). pp. 26-42. ISSN 1985-6571

Sekar, Vignesh and Eh Noum, Se Yong and Sivanesan, Sivakumar and Putra, Azma and Chin Vui Sheng, Desmond Daniel and Kassim, Dg Hafizah (2021) Effect of thickness and infill density on acoustic performance of 3D printed panels made of natural fiber reinforced composites. Journal of Natural Fibers. pp. 1-9. ISSN 1544-0478

Sekar, Vignesh and Kassim, Dg Hafizah and Putra, Azma and Noum, Se Yong Eh and Sivanesan, Sivakumar and Chin, Kok Chun and Wong, Yi San (2021) Acoustic Properties Of Micro-Perforated Panels Made From Oil Palm Empty Fruit Bunch Fiber Reinforced Polylactic Acid. Sound and Vibration, 55 (4). pp. 343-352. ISSN 1541-0161

Selamat, Mohd Zulkefli and Jamil, Noor Ashikin and Hasan, Rafidah and Dhar Malingam, Sivakumar (2021) Effect Of carbon fiber loading in gaphite-polypropylene composite properties as bipolar plate for polymer electrolyte membrane fuel cell. Malaysian Journal of Analytical Sciences, 25 (5). pp. 766-775. ISSN 1394-2506 (Unpublished)

Shamsudin, Shamsul Anuar and Abd Aziz, Muhammad Syahril and Sudin, Mohd Nizam and Ismail, Mohd. Farid and Huthaifa Ahmad Al-Issa (2021) Performance Of Thermal Electric Cooling (TEC) Air Condition For A Small Office Space. International Journal of Nanoelectronics and Materials, 14 (SI). pp. 395-412. ISSN 1985-5761

Shamsudin, Shamsul Anuar and Abd Rahman, Norasra and Zainal, Zairulazha and Md Yusof, Hasrul Izatie and Al-Issa, Huthaifa Ahmad (2021) Initial study on safety hazards by heavy transportation on Malaysian roads. International Journal of Integrated Engineering, 14 (4). pp. 339-349. ISSN 2229-838X

Sukri, Mohamad Firdaus and Mohd Tahir, Musthafah and Ab Razak, Juhari and Ab Rahman, Azhan (2021) Achieving Energy Cost Saving Using Best Energy Tariff: A Case Study Of A Sewage Plant. International Review of Electrical Engineering (IREE), 16 (1). pp. 68-77. ISSN 1827- 6660

Sukri, Mohamad Firdaus and Sumeru, Kasni and Pramudantoro, Triaji Pangripto and Erham, Eddy and Muliawan, Rizki (2021) Experimental evaluation on a centralized air conditioning system embedded with a split-type air conditioner as a dedicated subcooler. Journal of Building Engineering, 43. pp. 1-8. ISSN 2352-7102

Sumeru, Kasni and Panjaitan, Neni Emrida and Tohir, Toto and Sukri, Mohamad Firdaus (2021) Experimental investigation on outdoor and indoor PM2.5 and PM10 in supermarkets in Bandung during COVID-19 pandemic. International Journal Of Applied Technology Research, 2 (2). pp. 127-135. ISSN 2721-7582

Wasbari, Faizil and Salim, Mohd Azli and Abdul Hamid, Nurfaizey (2021) Investigation of pressure drop in hydro-pneumatic driveline propulsion system for dual hybrid passenger vehicle. International Journal of Nanoelectronics and Materials, 14. pp. 413-428. ISSN 1985-5761

Zainordin, Ahmad Zaifazlin and Mohamed, Zamri and Ahmad, Fauzi (2021) The magnetorheological fluid: testing on automotive braking system. International Journal of Automotive and Mechanical Engineering, 18 (1). pp. 8577-8584. ISSN 2180-1606

Zainuddin, Farah Ayiesya and Abd Samad, Md Fahmi (2021) Comparison Of Crossover In Genetic Algorithm For Discrete-Time System Identification. International Review of Mechanical Engineering, 15 (2). pp. 59-66. ISSN 1970-8734

Zakaria, Mohamad Shukri and Abd. Latif, Mohd Juzaila and Mohd Salleh, Nursyaira and Basri, Adi Azriff (2021) A computational study of a passive flow device in a mechanical heart valve for the anatomic aorta and the axisymmetric aorta. CFD Letters, 13 (4). pp. 69-79. ISSN 2180-1363

Zulkefli, Zamir Aimaduddin and Othman, Muhammad Nur and Putra, Azma and Mu, Luo and Abdul Jalil, Nawal Aswan and Raja Ahmad, Raja Mohd Kamil (2021) Experimental Investigation Of An Acoustic Metamaterial Barrier Design Composed Of A Square Prism Within A Hexagonal Recess. Asean Engineering Journal, 11 (3). pp. 57-70. ISSN 2586-9159