Items where Division is "Faculty of Mechanical Engineering" and Year is 2022

Abd Samad, Md Fahmi and Yusuf @ George, Kjeldsen (2022) Application of design for manufacturing and assembly (DFMA) method to vehicle door design. Defence S and T Technical Bulletin, 15 (1). pp. 34-41. ISSN 1985-6571

Abd. Latif, Mohd Juzaila and Alkahari, Mohd Rizal and Yob, Mohd Shukri and Lim, Gordon Tze Yih and Musa @ Othman, Masjuri and Abdul Rahman, Mohd Nazim and P. Rajaandra and Nguyen, H. Q. (2022) Parameter optimization of fused deposition modeling process for 3D printed prosthetic socket using PCR-TOPSIS method. International Journal of Nanoelectronics and Materials, 15 (SI). pp. 247-258. ISSN 1985-5761

Abd. Latif, Mohd Juzaila and Zakaria, Mohamad Shukri and Hamshary, Furas Anes Saleh and Harun, Muhamad Noor and Mahmud, Jamaluddin and Nguyen, Ho Quang (2022) Effect of water content on correlation of biomechanical properties and grayscale of articular cartilage using low-field MRI. International Journal of Nanoelectronics and Materials, 15 (SI). pp. 259-269. ISSN 1985-5761

Abdollah, Mohd Fadzli and Amiruddin, Hilmi and Mohamad Norani, Mohamad Nordin (2022) Lubricity and mechanical stability of bio-grease formulated from non-edible vegetable oil. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. pp. 1-21. ISSN 1350-6501

Abdollah, Mohd Fadzli bin and KAZIM, MUHAMMAD NUR AKMAL and Amiruddin, Hilmi and Ramli, Faiz Redza (2022) Surface quality and absorption properties of Polymeric Composite (PLA-PCU) fabricated using 3D printing for articular cartilage application. JURNAL TRIBOLOGI, 35. pp. 167-185. ISSN 2289-7232

Abdul Halim, Abdul Qayyum and Tee, Boon Tuan (2022) Application of variable speed drive to overcome air conditioning oversizing issue. Journal of Mechanical Engineering, 19 (2). pp. 219-232. ISSN 1823-5514

Abdul Kadir, Faizul Akmar and Tahiruddin, Mohd Faqrul Radzi and Shamsudin, Shamsul Anuar and Ahmad, Fauzi and Jamaluddin, Hishammudin and Mohamad, Taib Iskandar (2022) Recent publication trends on throttle body design. International Journal of Nanoelectronics and Materials, 15 (SI). pp. 523-543. ISSN 1985-5761

Abdullah, Mohd Azman and Harun, Mohd Hanif and Ahmad, Fauzi and Mohamed Jamil, Fathiah and MUNALIZA BINTI IBRAHIM, MUNALIZA BINTI IBRAHIM (2022) Railway car body lateral hunting attenuation using body-based modified skyhook control for secondary suspension. In: 8th Mechanical Engineering Research Day (MERD'22), 13 July 2022, Kampus Teknologi UTeM, Melaka.

Abdullah, Norli and Norizan, Mohd Nurazzi and Abdul Halim, Norhana and Ngah Demon, Siti Zulaikha and Mohamad, Imran Syakir (2022) Heterojunctions of rGO/metal oxide nanocomposites as promising gas-sensing materials—A review. Nanomaterials, 12 (13). pp. 1-38. ISSN 2079-4991

Abdullah, Norli and Norizan, Mohd Nurazzi and Janudin, Nurjahirah and Mohd Kasim, Noor Azilah and Mohd Saidi, Norshafiqah and Osman, Mohd Junaedy and Mohamad, Imran Syakir (2022) Characterizations of MWCNTs nanofluids on the effect of surface oxidative treatments. Nanomaterials, 12 (7). pp. 1-26. ISSN 2079-4991

Abdullah, Norli and Norizan, Mohd Nurazzi and Janudin, Nurjahirah and Mohd Kasim, Noor Azilah and Mohd Saidi, Norshafiqah and Osman, Mohd Junaedy and Mohamad, Imran Syakir and Mohd Rosli, Mohd Afzanizam (2022) Surface-oxidised carbon nanofibre-based nanofluids: Structural, morphological, stability and thermal properties. Nanomaterials, 12 (21). pp. 1-25. ISSN 2079-4991

Abdullah, Norli and Norizan, Mohd Nurazzi and Ngah Demon, Siti Zulaikha and Abdul Halim, Norhana and Mohamad, Imran Syakir (2022) Effect of reaction time on the structure and optical properties of P3HT/MWCNT-OH nanocomposites. Polimery, 67 (5). pp. 205-211. ISSN 0032-2725

Abdullah, ‪Norli and Norizan, Mohd Nurazzi and Moklis, Muhammad Harussani and Ngah Demon, Siti Zulaikha and Abdul Halim, Norhana and Mohamad, Imran Syakir and Bahruji, Hasliza (2022) Research progress on polythiophene and its application as chemical sensor. ZULFAQAR Journal of Defence Science, Engineering & Technology, 5 (1). pp. 48-68. ISSN 2773-5281

Akop, Mohd Zaid and Jasmi, Ahmad Razin (2022) Development of solar-assisted vapor absorption air-conditioning system simulation models by using trnsys. In: Advanced approach for future technology. Penerbit UTeM Press, Durian Tunggal, Melaka, pp. 53-80. ISBN 9789672454465

Akop, Mohd Zaid and Jikol, Favian and Salim, Mohd Azli and Mohamed Arifin, Yusmady and Herawan, Safarudin Gazali (2022) Biofuel development in Malaysia: Challenges and future prospects of palm oil biofuel. International Journal of Nanoelectronics and Materials, 15 (SI). pp. 159-181. ISSN 1985-5761

Akop, Mohd Zaid and Shehab, Salem Saleh Omar and Masripan, Nor Azmmi and Abdul Hamid, Nurfaizey and Wasbari, Faizil and Md. Saad, Adzni and Mansor, Muhd Ridzuan and Noordin, Aminurrashid and Herawan, Safarudin Gazali (2022) Effect of light intensity on indoor temperature and air velocity: A simulation study. International Journal of Nanoelectronics and Materials, 15 (SI). pp. 415-427. ISSN 1985-5761

Habeeb, Hiyam Adil and Mohan, Ahmed Esmael and Abdullah, Mohd Azman and Abdul Aziz, Muhammad Shalihin and Mat Dan, Reduan and Harun, Mohamad Haniff (2022) Maintenance strategy and analysis for Electric Multiple Unit (EMU) train failures. In: Advanced approach for future technology. Penerbit UTeM Press, Durian Tunggal, Melaka, pp. 97-112. ISBN 9789672454465

Hamzah, Afiqah (2022) Direct injection of conventional and alternative fuel in spark ignition engines. In: Advanced approach for future technology. Penerbit UTeM Press, Durian Tunggal, Melaka, pp. 113-151. ISBN 9789672454465

Ismail, Rainah and Azmi, Muhamad Syafwan and Putra, Azma (2022) Correlation of design parameters of lattice structure for highly tunable passive vibration isolator. Journal Of Vibration And Control, -. pp. 1-14. ISSN 1077-5463

Khong, Fan Hao and Abd Samad, Md Fahmi and Tamadaran, Brahmataran (2022) Identification of industrial air compression system using neural network. International Journal of Modeling, Simulation, and Scientific Computing, 13 (5). pp. 1-12. ISSN 1793-9623

Md Daud, Nazri and Sudin, Mohd Nizam and Zakaria, Mohd Shukri (2022) Flow analysis of airfoil with mechanical slat and flap using CFD. Journal of Engineering and Technology, 13 (1). pp. 73-82. ISSN 2180-3811

Md. Yusof, Nidzamuddin and Karjanto, Juffrizal and Hassan, Muhammad Zahir and Terken, Jacques and Delbressine, Frank L.M. and Rauterberg, Matthias (2022) Reading during fully automated driving: A study of the effect of peripheral visual and haptic information on situation awareness and mental workload. IEEE Transactions on Intelligent Transportation Systems, 23 (10). pp. 19136-19144. ISSN 1524-9050

Mohammad Taha, Mastura and Norrrahim, Mohd Nor Faiz and Mohd Nasir, Mohd Hakim and Razali, Nadlene and Ahmad Ilyas, Rushdan and Knight, Victor Feizal (2022) Effect of chemical treatment of sugar palm fibre on rheological and thermal properties of the PLA composites filament for FDM 3D printing. Materials, 15 (22). pp. 1-15. ISSN 1996-1944

Mohd Rosli, Mohd Afzanizam and Hamizan, Muhammad Aiman Danial and Nawam, Muhammad Zaid and Hussain, Faridah and Herawan, Safarudin Gazali (2022) Measurement of spectral match and spatial non-uniformity for indoor solar simulator. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 100 (1). pp. 98-115. ISSN 2289-7879

Mohd Rosli, Mohd Afzanizam and Latif, Irfan Alias Farhan and Noordin Saleem, Siti Nur Dini and Nawam, Muhammad Zaid and Md Noh, Noriffah and Herawan, Safarudin Ghazali and Hussain, Faridah (2022) The effect of variation in mass flow rate and solar irradiance on temperature uniformity and thermal performance of photovoltaic thermal: A simulated CFD study. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 91 (2). pp. 106-119. ISSN 2289-7879

Mohd Sa'at, Fatimah Al-Zahrah and Allafi, Waleed Almukhtar (2022) Entrance and exit effects on oscillatory flow within parallel-plates in standing-wave thermoacoustic system with two different operating frequencies. Journal of King Saud University – Engineering Sciences, 34 (5). pp. 350-360. ISSN 1018-3639

Mohd Sa'at, Fatimah Al-Zahrah and Hasbullah, Nurjannah and Sukri, Mohamad Firdaus and Shikh Anuar, Fadhilah and Saechan, Patcharin (2022) Experimental and numerical studies of one-directional and bi-directional flow conditions across tube banks heat exchanger. Thermal Science and Engineering Progress, 28. pp. 1-13. ISSN 2451-9049

Mohd Saat, Fatimah Al Zahrah and Rosle, Nur Damia Asma and Abd. Rahim, Irfan and Raja Osman, Raja Nor Firdaus Kashfi (2022) The impact of stack parameters on the temperature difference of a thermoacoustic cooler. Thermal Science, 26 (6A). pp. 4535-4546. ISSN 0354-9836

Mohd Saat, Fatimah Al Zahrah and Rosle, Nur Damia Asma and Raja Othman, Raja Nor Firdaus Kashfi and Abd Rahim, Irfan and Saechan, Patcharin (2022) Investigation on standing wave thermoacoustic generator using DeltaEC. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 96 (2). pp. 51-64. ISSN 2289-7879

Mohd Saat, Fatimah Al Zahrah and Sukri, Mohamad Firdaus and Rosle, Nur Damia Asma and Raja Othman, Raja Nor Firdaus Kashfi and Saechan, Patcharin (2022) The effect of porous materials on temperature drop in a standing wave thermoacoustic cooler. International Journal of Nanoelectronics and Materials, 15. pp. 405-414. ISSN 1985-5761

Muhammad, Noryani and A. Hamid, Husna and Omar, Ghazali and Masripan, Nor Azmmi (2022) Correlation analysis of biodegradable additives, temperature and loading toward tribology behaviour of musa aluminata balbisiana (MBS) oil. Chemical Engineering Transactions, 97. pp. 535-540. ISSN 2283-9216

Noordin Saleem, Siti Nur Dini and Mohd Rosli, Mohd Afzanizam and Sanusi, Nortazi and Salimen, Nurfarhana and Herawan, Safarudin Gazali and Abdullah, Qaharuddin (2022) Performance optimization of a simulation study on phase change material for photovoltaic therm. CFD Letters, 14 (9). pp. 32-51. ISSN 2180-1363

Omar, Ghazali and Hamzah, Afiqah and Akop, Mohd Zaid and Zakaria, Mohd Hafidz and Rosli, Nur Natasha Atikah (2022) Deposit formation in the injector of a diesel engine fueled with higher blended palm biodiesel. Jurnal Tribologi, 33. pp. 97-112. ISSN 2289-7232

Phuman Singh, Amrik Singh and Abu Kassim, Khairil Anwar and Koetniyom, Saiprasit and Ubaidillah, Ubaidillah (2022) Lane change aspect ratio and dimensionless path for emergency obstacle avoidance. International Review of Mechanical Engineering, 16 (4). pp. 198-205. ISSN 1970-8734

Phuman Singh, Amrik Singh and Lim, Ming Hui and Abu Kassim, Khairil Anwar and Koetniyom, Saiprasit (2022) Emergency lane change with a vehicle in the neighbouring lane. International Review of Mechanical Engineering (I.RE.M.E.), 16 (5). pp. 214-221. ISSN 1970-8734

Phuman Singh, Amrik Singh and Nishihara, Osamu (2022) Trajectory tracking and integrated chassis control for obstacle avoidance with minimum jerk. IEEE Transactions on Intelligent Transportation Systems, 23 (5). pp. 4625-4640. ISSN 1524-9050

Putra, Azma and Kassim, Dg Hafizah and Othman, Muhammad Nur and Oliveira, Thaynan and Souli, M'Hamed and Irianto and Herawan, Safarudin (2022) Waste durian husk fibers as natural sound absorber: performance and acoustic characterization. Buildings, 12 (8). 01-12. ISSN 2075-5309

Ramli, Faiz Redza and Sudin, Mohd Nizam and Alkahari, Mohd Rizal and Che Mat, Muhammad Arifuddin and Herawan, Safarudin Ghazali (2022) The effect of tensile strength and surface roughness by varying oxygen level in 3D printer chamber. Jurnal Tribologi, 33. pp. 80-96. ISSN 2289-7232

Razak, Nurul Hanim and Che Aziz, Dhiya’ Hawina and Zulkafli, Nur Izyan and Klemeš, Jiří Jaromír (2022) Optimal fertigation for automated fertilizer blending system by minimising fertilizer cost and utility consumption. Chemical Engineering Transactions, 94. pp. 115-120. ISSN 2283-9216

Razak, Nurul Hanim and Zulkafli, Nur Izyan and Che Aziz, Dhiya’ Hawina and Jiří, Jaromír Klemeš (2022) Analytical hierarchy process for automated fertigation blending system in reducing nutrient and water losses. Chemical Engineeing Transactions, 97. pp. 493-498. ISSN 2283-9216 (In Press)

Roslizar, Aiman and Taddeucci, Jacopo and Paetzold, Ulrich Wilhelm and Hölscher, Hendrik and Richards, Bryce S. (2022) Influence of wind speed on volcano ash removal from self-cleaning cover films dedicated for photovoltaics. IEEE Journal of Photovoltaics, 12 (1). pp. 453-460. ISSN 2156-3381

Sahrom, Amirul Hafiz (2022) Biodiesel Blending Effect On Fuel Injection Parameter Blending. Masters thesis, Universiti Teknikal Malaysia Melaka.

Salim, Mohd Azli and Ab Wahid, Ameeruz Kamal and Masripan, Nor Azmmi and Md. Saad, Adzni and Akop, Mohd Zaid and Feng, Dai (2022) Analyse of strain and stress on different stretchable conductive ink materials by numerical method. International Journal of Nanoelectronics and Materials, 15 (SI). pp. 429-440. ISSN 1985-5761

Salim, Mohd Azli and Ab Wahid, Ameeruz Kamal and Masripan, Nor Azmmi and Photong, Chonlatee and Md. Saad, Adzni and Akop, Mohd Zaid (2022) Transient thermal simulation analysis of die-attach adhesives. International Journal of Nanoelectronics and Materials, 15 (SI). pp. 505-522. ISSN 1985-5761

Seeni Ibramsa, Rizwana and Abd Latif, Mohd Juzaila and Zakaria, Mohamad Shukri and Harun, Muhamad Noor and Mahmud, Jamaluddin (2022) Quantitative study of articular cartilage based on greyscale assessment using low-field MRI. International Journal on Advanced Science, Engineering and Information Technology, 12 (1). pp. 231-236. ISSN 2088-5334

Selamat, Mohd Zulkefli and Hamdan, Hamzaitul Akmarizal and Ali, Mohd Basri and Dhar Malingam, Sivakumar (2022) Flow channel dimensional accuracy of bipolat plate fabrication through milling machining process. In: Advanced Approach for Future Technology. Penerbit UTeM Press, Durian Tunggal, Melaka, pp. 37-52. ISBN 9789672454465

Selamat, Mohd Zulkefli and Salleh, Suhaila and Lau, Kok Tee and Jumaidin, Ridhwan and Nasir, Nurulfazielah (2022) Effect of yeast content as pores forming agent on porous alumina ceramic. International Journal of Nanoelectronics and Materials, 15 (1). pp. 18-26. ISSN 1985-5761

Setyawan, Andriyanto and Sumeru, Kasni and Pramudantoro, Triaji Pangripto and Muliawan, Rizki and Tohir, Toto and Sukri, Mohamad Firdaus (2022) Effect of compressor-discharge-cooler heat-exchanger length using condensate water on the performance of a split-type air conditioner using R32 as working fluid. Energies, 15 (21). pp. 1-16. ISSN 1996-1073

Shah, Syed Nasir and Kim, Hung Mo and Tee, How Tan and Chin, Chong Ng and Othman, Muhammad Nur and Putra, Azma (2022) Insulating foamed lightweight cementitious composite with co-addition of micro-sized aerogel and hydrogen peroxide. Construction and Building Materials, 360. pp. 1-9. ISSN 0950-0618

Sudin, Mohd Nizam and Md Daud, Nazri and Yusuff, Mohd Asri (2022) A comparison of the flexural properties of PLA and ABS printed parts. Journal of Engineering and Technology, 13 (2). pp. 1-13. ISSN 2180-3811

You, Siming and Tee, Boon Tuan and Ahmed, Asam and Ge, Tianshu and Peng, Jinqing and Yan, Wei-Cheng (2022) Assessment of the renewable energy generation towards net-zero energy buildings: A review. Energy & Buildings, 256. pp. 1-20. ISSN 0378-7788

Zainal, Zairulazha and See, Hui Lin and Shamsudin, Shamsul Anuar and Al_Issa, Huthaifa Ahmad (2022) Synthesis of a self-reeling hose system for bathroom use. International Journal of Nanoelectronics and Materials, 15 (SI). pp. 339-353. ISSN 1985-5761

Zulkafli, Nur Izyan and Sukri, Mohamad Firdaus and Mohd Tahir, Musthafah and Muhajir, Asjufri and Hanak, Dawid Piotr (2022) Optimal operation of chillers plant in academic building by using linear programming approach. Chemical Engineering Transactions, 97. pp. 91-96. ISSN 2283-9216