Items where Division is "Faculty of Manufacturing Engineering > Department of Engineering Materials" and Year is 2011

Se, Sian Meng and Shaaban, Azizah and Mohd Ibrahim, Imran (2011) Microwave Absorbing Material Using Rubber Wood Sawdust. Wireless Technology and Applications (ISWTA), 2011 IEEE Symposium on. pp. 192-197. ISSN 978-1-4577-1496-2

A.R.M, Warikh and A., Nurulhuda and A.R., Jeefferie (2011) Characterization of Microstructure and Magnetic Properties of CaCu3Mn4O12 by Sol Gel Route. Malaysian Journal of Microscopy, 7. pp. 147-153. ISSN 1823 7010

ABD RAZAK , JEEFFERIE and S., Nurhashima and YAAKOB, MOHD YUHAZRI and Sihombing, Haeryip and S., Mohd Shukor and Abdullah, N.S and Omar, M.A (2011) Characterization of Injection Molded 17-4PH Stainless Steel prepared with Waste Rubber Binder. JOURNAL OF MECHANICAL ENGINEERING AND TECHNOLOGY (JMET), 3 (1). pp. 11-21. ISSN 2180-1053

ABD RAZAK , JEEFFERIE and Abd Rahim, Toibah and YAAKOB, MOHD YUHAZRI and A.R.M., Warikh and Omar, Nooririnah and Maslan, Mohamad Haidir and Sihombing, Haeryip and Junid, Ramli (2011) Tensile and Impact Properties Evaluation for Enviro-Recycled Wood Plastic Composite of PP/r-WF. Applied Mechanics and Materials, 52-54. pp. 2082-2087. ISSN 1660-9336

ABD RAZAK , JEEFFERIE and Othman, Nurul Fariha and Abd Rashid , Mohd Warikh and YAAKOB, MOHD YUHAZRI and Sihombing, Haeryip and Junid , Ramli (2011) Preliminary study on the Physical and Mechanical Properties of Tapioca Starch / Sugarcane Fiber Cellulose Composite. ARPN Journal of Engineering and Applied Sciences, 6 (4). pp. 7-15. ISSN ISSN 1819-6608

ABD RAZAK , JEEFFERIE and YAAKOB, MOHD YUHAZRI and Sihombing, Haeryip (2011) Mechanical Properties Evaluation for Enviro-Wood Plastic Composite Made of HDPE-PPB-RWF Mixtures. International Journal of Advances in Science and Technology, 3 (2). pp. 87-101. ISSN 2229-5219

Abd Manaf, Mohd Edeerozey and Tsuji, Manami and Nobukawa, Shogo and Yamaguchi, Masayuki (2011) Effect of Moisture on the Orientation Birefringence of Cellulose Esters. Polymers, 3. pp. 955-966. ISSN 2073-4360

Abd Manaf, Mohd Edeerozey (2011) Wavelength Dispersion of Orientation Birefringence for Cellulose Esters Containing Tricresyl Phosphate. Macromolecules, 44. pp. 3942-3949. ISSN 0024-9297

Aman, Aminudin and Yaacob, Mohd Muhridza and ABD RAZAK , JEEFFERIE (2011) Dieletric Strength of Waste Tyre-Dust-Polypropylene (WTD-PP) for High oltage Application. Australian Journal of Basic and Applied Sciences, 5 (9). pp. 1578-1583. ISSN 1991-8178

Asyadi Azam, Mohd and Fujiwara, Akihiko and Shimoda, Tatsuya (2011) Aluminum Oxide Support Layer for Vertical Growth of Single Walled Carbon Nanotube using Alcohol Catalytic CVD Technique. In: The Fifth International Conference on Advanced Materials and Nanotechnology (AMN-5), 5-13 February 2011, Wellington Convention Centre, Wellington, New Zealand.

Asyadi Azan, Mohd and Fujiwara, Akihiko and Shimoda, Tatsuya (2011) Directly grown vertically aligned single-walled CNTs on conducting substrate as electrode material for electrochemical capacitor. In: 219th Electrochemical Society Meeting, 1-8 May 2011, The Montreal Convention Center (Palais des Congrès de Montréal), Montreal, Quebec, Canada.

Junid , Ramli and ABD RAZAK , JEEFFERIE and Mahat, Mohd Muzamir (2011) The Effects of Photoinitiator Addition to the Mechanical and Physical Properties of the Epoxy and Vynil Ester Fiber Glass Laminated Composites. International Journal of Applied Science and Technology, 1 (03). pp. 74-79. ISSN 2221-0997

Lau, Kok Tee and Sorrell, Charles Christopher (2011) Electrophoretic Mobilities Of Dissolved Polyelectrolyte Charging Agent And Suspended Non-Colloidal Titanium During Electrophoretic Deposition. Materials Science and Engineering: B, 176 (5). 369 - 381. ISSN 0921-5107

Lim, Siang Ying and Mohd Salleh , Mohamad Amran and Mohamed Yusoff, Hamdan and Abdul Rashid, Suraya and ABD RAZAK , JEEFFERIE (2011) Continuos production of carbon nanotubes - A review. Journal of Industrial and Engineering Chemistry, 17. pp. 367-376. ISSN 1226-086X

M.Y, YUHAZRI and P.T, Phongsakorn and I.P, Haeryip Sihombing and A.R., Jeefferie and A. P., Puvanasvaran and A.M, Kamarul and Rassiah, Kannan (2011) Mechanical Properties of Kenaf/Polyester Composites. International Journal of Engineering & Technology, 11 (1). pp. 127-131. ISSN 2077-1185

Mohamad, Noraiham (2011) Investigation on Impact Fracture of Epoxidized Natural Rubber-Alumina Nanoparticle Composites (ENRAN). Global Engineers & Technologist Review, 1 (2). pp. 26-34. ISSN 2231-9700

Mohd Abid, Mohd Asyadi Azam (2011) Direct Growth of Vertically-Aligned Single-Walled Carbon Nanotubes on Conducting Substrates using Ethanol for Electrochemical Capacitor. Journal of New Materials for Electrochemical Systems, 14 (3). pp. 173-178. ISSN 1480-2422

Mohd Abid, Mohd Asyadi Azam (2011) Growth of vertically aligned single-walled CNTs using alcohol catalytic CVD method. Journal of Industrial Technology SIRIM, 19 (2). 0-0. ISSN 0128-4940

Mohd Abid, Mohd Asyadi Azam (2011) Thermally oxidized aluminum as catalyst-support layer for vertically aligned single-walled carbon nanotube growth using ethanol. Applied Surface Science, 258. pp. 873-882. ISSN 0169-4332

Mohd Abid, Mohd Asyadi Azam (2011) Towards realization of high performance electrochemical device using vertically-aligned single-walled carbon nanotubes grown from ethanol. Global Engineers & Technologists Review, 1 (2). pp. 1-8. ISSN 2231-9700

Mohd Rosli, ZULKIFLI and ayoob, N.F and Jariah, Mohamad Juoi and rosli, N.R (2011) Caharacterisation and properties of sintered glass-ceramics produced from recycling glass by using pressure-less method Characterisation and Properties of sintered Glass-Ceramics Produced from recycling Glass by using Presurre-less Method. Key Engineering Materials. pp. 933-938. ISSN 1013-9826

Nur Rifhan , Rosli and Azizah , Shaaban and Jariah , Mohamad Juoi and Nur Farizan , Ayoob (2011) Characterisation and Properties of Sintered Recycled Glass utilising CIP Method. Key Engineering Materials, 471-47. pp. 245-250. ISSN 1013-9826

Rassiah, Kannan and Chik, Mohd As'ri and Yaakob, Mohd Yuhazri and Haeryip Sihombing (2011) Effect on mechanical properties of hybrid blended coconut coir/paraffin wax/LDPEE. International Journal of Integrated Engineering, 3 (2). pp. 63-67. ISSN 2229-838X

T., Joseph Sahaya Anand (2011) INTERMETALLIC NICKEL ALUMINIDES BEING AN ALTERNATIVE FOR AUTOMOTIVE BODY APPLICATIONS. Lambert Academic Publisher (LAP), Germany. ISBN 987-3-8443-9835-9

T., Joseph Sahaya Anand and A., H.W. Ngan (2011) NANOSTRUCTURAL STUDIES OF SPUTTER-DEPOSITED NixAl1-x (0.5 ≤ x ≤ 1.0) ALLOY THIN FILMS. Malaysian Journal of Microscopy, 7. pp. 221-227. ISSN 1823 7010

T., Joseph Sahaya Anand and Mei Ying, Lim and Mazalan, Nor Hamizah (2011) Electrodeposited MoTe2 Thin Films for Photoelectrochemical (PEC) Cell Applications. In: Malaysian Technical Universities International Conference on Engineering & Technology (MUiCET 2011), 13-15 November 2011, UTHM, Batu Pahat, Johor.

T., Joseph Sahaya Anand and S,, Shariza (2011) Effect of Deposition Time on the Structural and Optical Properties of Molybdenum Chalcogenides Thin Films. Chalcogenide Letters, 8 (9). pp. 529-539. ISSN ISSN 1584-8663

T., Joseph Sahaya Anand (2011) TEM Studies of SPUTTER-DEPOSITED Ni4Al Alloy Thin Films. In: International Conference on Nanotechnology and Ultrasound, 12 - 14 January 2011, Tiruchirapalli, INDIA.

T., Joseph Sahaya Anand and Mei Ying, Lim and Mazlan, Nor Hamiza (2011) Synthesis and Characterization of MoTe2 Thin Films for Photoelectro-chemical Cell Applications. In: United Kingdom - Malaysia - Ireland Engineering Science Conference 2011 , 12-14 July 2011, University of Malaya, 50603 Kuala Lumpur, Malaysia.

T. , Joseph Sahaya Anand (2011) Can Nickel replace Steel in Automotive Industry? An Overview. Lambert Academic Publisher (LAP), Germany. ISBN 987-3-8465-5475-3

T. Joseph, Sahaya Anand and S., Shariza and Z. M. , Rosli (2011) Structural and Optical Properties of Electrodeposited MoS2 Thin Films for Photoelectrochemical (PEC) / Solar Cell Applications. In: International Conference on Advanced Manufacturing 2011 , May 23 – 24, 2011, TATi University College, , Terengganu.

Thet, Thet Mon and Junid , Ramli and ABD RAZAK , JEEFFERIE and Sarif, Safian and V.C., Venkatesh (2011) Performance of Cryogenic Machining wih Nitrogen Gas in Machining of Titanium. Applied Mechanics and Materials - Advances in Mechanical Engineering, 52-54. pp. 2003-2008. ISSN 1662-7482

Y., Mohd Yuhazri and A.R., Jeefferie and I.P, Haeryip Sihombing and O., Nooririnah and A.R, Warikh (2011) Coating Effect Condition on the Corrosion Properties of Mild Steel Substrate. International Journal of Applied Science and Technology, 1 (1). pp. 45-49. ISSN 2221-0997

YAAKOB, MOHD YUHAZRI and IP, HAERYIP SIHOMBING and A.R, JEEFFERIE and A.Z, AHMAD MUJAHID and A.G, BALAMURUGAN and M.N, NORAZMAN and A., SHOHAIMI (2011) Optimization of Coconut Fibers Toward Heat Insulator Applications. GLOBAL ENGINEERS & TECHNOLOGISTS REVIEW, 1 (1). pp. 35-40. ISSN 2231-9700

Yaakob, Mohd Yuhazri and A.R, Jeefferie and I.P, Haeryip Sihombing and S., Siti Rahmah (2011) Effect of Parameter Controlled in Tin Coating on the Mild Steel Substrate. International Journal of Engineering Science and Technology, 3 (3). pp. 2113-2117. ISSN 0975-5462