Items where Division is "Faculty of Manufacturing Engineering > Department of Manufacturing Management" and Year is 2013

Perumal, Puvanasvaran (2013) People Development System for Lean Process Management Implementation. Penerbit UTeM, UTeM. ISBN 9789670257273

A Rahman, Muhamad Arfauz and Abu Bakar, Baharudin and Saptari, Adi and Hussein, Nur Izan Syahriah and Halim, Isa and Imam Fauzi, Elfi Rahayu (2013) Dimensional deviation affected by cutting parameters and machine tool rigidity in dry turning of S45C steel. Applied Mechanics And Materials, 315. pp. 749-754. ISSN 1662-7482

A. P., Puvanasvaran (2013) CONSIDERATION OF DEMAND RATE IN OVERALL EQUIPMENT EFFECTIVENESS (OEE) ON EQUIPMENT WITH CONSTANT PROCESS TIME. Journal of industrial engineering and management, 6 (2). pp. 507-525. ISSN 2013-0953

A. P., Puvanasvaran (2013) ORGANIZATIONAL VERTICAL AND VIRTUAL INTEGRATION MODEL IN IMPLEMENTING LEAN MANUFACTURING TRANSFORMATION. PROCEEDINGS OF INTERNATIONAL CONFERENCE ON TECHNOLOGY MANAGEMENT AND TECHNOPRENEURSHIP (IC-TMT) 2012 PARTICIPATION, 1 (1). pp. 85-99. ISSN IC-TMT-2012

A. P., Puvanasvaran (2013) WORKSHOP STORE ROOM IMPROVEMENT WITH 5S: A CASE STUDY. Advanced Manufacturing Technology, 7 (1). pp. 45-62. ISSN 1985-3157

A. P., Puvanasvaran and T.S.N., Stephanie and N., Norazlin (2013) Study On Streamlined Process Improvement By Using Value Stream Mapping In Automotive Seating Company: A Case Study. Journal of Advanced Manufacturing Technology (JAMT) , 07 (2). pp. 57-67. ISSN 1985-3157

A. Perumal, Puvanasvaran and Chiang, Ze Mei and Andiappan, Alagendran (2013) Overall equipment efficiency improvement using time study in an aerospace industry. Procedia Engineering 00 (2013) 000–000, 68. ISSN 1877-7058

Ab Rahman, Mohd Nizam and Wan Mahmood, Wan Hasrulnizzam and Md Deros, Baba (2013) Peningkatan Produktiviti Syarikat Pembuatan Melalui Penambahbaikan Fleksibiliti dan Kecekapan Masa : Satu Kajian Simulasi. Jurnal Teknologi, UTM, 62 (1). pp. 53-61. ISSN 0127-9696

Al Amin, Mohamed Sultan and Isa , Halim and Nor Akramin, Mohamad and Febrian, Idral and Taufik, , (2013) A Review on Ergonomics Risk Factors and Health Effects Associated with Manual Materials Handling. Advanced Engineering Forum. pp. 251-256. ISSN 2234-991X

Chong, Kuan Eng and Lim, Ke Sin (2013) CONWIP Based Control Of A Semiconductor End Of Line Assembly. Procedia Engineering , 53. pp. 607-615. ISSN 1877-7058

Isa, Halim and Seri Rahayu , Kamat and Abdullah, Rohana and Hambali, Arif and Ab. Rahman , Mahmood (2013) Electromyography Analysis associated with Prolonged Standing In Metal Stamping Industry. Journal of Advanced Manufacturing Technology (JAMT) . pp. 15-26. ISSN 1985-3157

Isa , Halim and Seri Rahayu , Kamat and Syed mohamed, Muhammad syafiq and Mohd Shahrizan, Othman and Rohana , Abdullah (2013) Effects of Lifting Height, Twist Angle and Load mass on Psychophysical Experience, Muscle Activity and Heart Rate during Manual Lifting. Advanced Engineering Forum. pp. 245-250. ISSN 2234-991X

Isa , Halim and Syed Mohamed, Muhammad Syafiq (2013) An Overview of Ergonomics Problems Related to CNC Machining Operations. Advanced Engineering Forum. pp. 137-142. ISSN 2234-991X

Ito, Teruaki and Mohamad, Effendi and Salleh, Mohd Rizal (2013) A Student Mobility Program through Cross Cultural and Technical Exposure. In: JSME No.13-205 The 13th Design Engineering Workshop 2013, 28-30 November 2013, Kitakyushu, Japan.

K.C. Ng and Chong, Kuan Eng and G.G.G. Goh (2013) Total Productive Maintenance Strategy In A Semiconductor Manufacturer: A Case Study. In: 2013 IEEE International Conference On Industrial Engineering And Engineering Management, 3-4 Jun 2013, Bayview Hotel Langkawi.

Kam, Choi Ng and Chee, Peng Lim and Chong, Kuan Eng and Goh, Gerald Guan Gan (2013) Elimination of waste through value add/non value add process analysis to improve cost productivity in manufacturing - a case study. In: 2013 IEEE International Conference On Industrial Engineering And Engineering Management, 10-13 Dec2013, Bangkok, Thailand.

Kamat, Seri Rahayu and Norhidayah, Hashim and Mohd Shahrizan, Othman (2013) A Study on Muscle Fatigue Associated with Awkward Posture among Workers in Aerospace Industry. Advanced Materials Research Journal, 10. pp. 287-292. ISSN 1022-6680

Mohamad, Effendi and Teruaki, Ito and Yuniawan, Dani (2013) Lean Manufacturing Tools Training System. In: JSME No.13-205 The 13th Design Engineering Workshop 2013, 28-30 Nov 2013, Kitakyushu, Japan.

Mohamad, Effendi (2013) Characteristic Mapping Of Overall Equipment Effectiveness Elements Through Simulation And The Taguchi Method. Journal of Human Capital Development, 6 (2). pp. 1-11. ISSN 1985-7012

Mohamad, Effendi (2013) Quantifying Benefits Of Lean Manufacturing Tools Implementation With Simulation In Coolant Hose Factory. Journal of Human Capital Development, 6 (2). pp. 13-26. ISSN 1985-7012

Mohamad, Effendi and Ito, Teruaki and Yuniawan, Dani (2013) A simulation-based approach to decision support for lean practitioners. In: 20th ISPE International Conference on Concurrent Engineering, 2-6 September 2013, Melbourne , Australia.

Perumal, Puvanasvaran (2013) Organizational Vertical & Virtual Integration Model in Implementing Lean Manufacturing Transformation. Journal of Technology Management and Entrepreneurship, 1 (1). pp. 85-99. ISSN 1675-8404

Perumal , Puvanasvaran and Hamdan , Megat and Tang Sai, Hong and Muhamad , Mohd Razali and S Hamouda , Abdel Magid (2013) Lean process management implementation through enhanced problem solving capabilities. Journal of Industrial Engineering and Management, 3 (3). pp. 1-47. ISSN 2013-0953

Saptari, Adi and Poh Kiat, Ng (2013) Applying Clockwise and Counterclockwise Torque Directions in Pinch Grips: A Descriptive Study. In: 4th International Conference on Mechanical and Manufacturing Engineering 2013, Dec 17, 2013 - Dec 19, 2013, Equatorial Hotel, Bangi- Putrajaya.

Seri Rahayu , Kamat and Fatihah Ros, Ahmad (2013) A relationship between road conditions, physical and psychophysical experience among occupational drivers. Advanced Engineering Forum, 10 (2013) (1). pp. 345-350. ISSN 103.26.74.254-27/05/14,09:27:37

Seri Rahayu , Kamat and Norhidayah, Hashim (2013) A study on muscle fatigue associated with awkward posture among workers in aerospace industry. Advanced Engineering Forum, 10 (1). pp. 287-292. ISSN 103.26.74.254-27/05/14,09:25:29

Wan Mahmood, Wan Hasrulnizzam and Ebrahim, Zuhriah and Saptari, Adi and Mohamed Sultan, Al Amin and Abu Bakar, Mohd Hadzley and Subramonian, Sivarao and Ab Rahman, Mohd Nizam and Md Deros, Baba and Jusoff, Kamaruzaman and Jano, Zanariah (2013) Manufacturing performance in green supply chain management. World Applied Sciences Journal 21(Special Issue of Engineering and Technology). pp. 76-84. ISSN 1818-4952

Yuniawan, Dani and Ito, Teruaki and Mohamad, Effendi (2013) A proposal of total productive maintenance training system. In: JSME No.13-205 The 13th Design Engineering Workshop 2013, 28-30 November 2013, Kitakyushu, Japan.

Yuniawan, Dani and Teruaki, Ito and Mohamad, Effendi (2013) Calculation of overall equipment effectiveness weight by Taguchi method with simulation. CONCURRENT ENGINEERING: Research and Applications, 21 (4). pp. 296-306. ISSN 1063-293X

Yusup, Mohd Zaki and Wan Mahmood, Wan Hasrulnizzam and Salleh, Mohd Rizal and Mohamed, Norhafiza (2013) THE TRANSLATIONAL PROCESS OF CLEANER PRODUCTION STRATEGIES. GLOBAL ENGINEERS & TECHNOLOGISTS REVIEW, 3 (5). pp. 29-39. ISSN 2231-9700

Yusup, Mohd Zaki and Wan Mahmood, Wan Hasrulnizzam and Salleh, Mohd Rizal and Mohd Rosdi, Mohd Noor Hanif (2013) THE TRIGGER SIGNAL FOR LEAN PRODUCTION PRACTICES : A REVIEW. GLOBAL ENGINEERS & TECHNOLOGISTS REVIEW, 3 (6). pp. 23-32. ISSN 2231-9700

Yusup, Mohd Zaki and Wan Mahmood, Wan Hasrulnizzam and Salleh, Mohd Rizal and Tukimin, Rahayu (2013) A Review on Optimistic Impact of Cleaner Production on Manufacturing Sustainability. Journal of Advanced Manufacturing Technology (JAMT) . pp. 79-99. ISSN 1985-3157

syed mohamed, muhammad syafiq and Mohd Tamrin, Shamsul Bahri and Abdul Rahman, Ahmad Rizal (2013) The Suitability of Cross Cultural Models in Predicting Car Interior Design Preferences. International Journal of Education and Research, 1 (6). pp. 1-12. ISSN 2201-6333

syed mohamed, muhammad syafiq and Ze Mei, Chiang and Hui Hui, Yee (2013) Ergonomics Evaluation on Non Keyboard Input Devices. Universal Journal of Management and Social Sciences, 3 (9). pp. 65-69. ISSN 2226-6240