Browse By Repository:

 
 
 
   

Items where Subject is "T Technology > TN Mining engineering. Metallurgy"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Authors | Item Type
Jump to: A | C | F | H | J | K | L | M | N | O | P | R | S | Y | Z
Number of items at this level: 46.

A

Abu Daud , Halip (2013) An investigation on the influence of double heat treatment process on round stainless steel bar. Project Report. UTeM. (Submitted)

Ahmad Saifulnizam , Amron (2010) Heat Treatment And Mechanical Property Of Ti6A14V. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Syazni, Ahmad Akmar (2012) Effect Of Heat Treatment On Impact Strength Of Aluminium Alloy. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Zaidi, Ideris (2011) Mechanical Properties Of W/Cu-Zn Metal Composite Via Mechanical Alloying. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Alhawari, Khalid Salim and Omar, Mohd Zaidi and Ghazali, Mariyam Jameelah and Salleh, Mohd Shukor (2016) Dry Sliding Wear Behaviour Of Thixoformed Hypoeutectic AL–SI–CU Alloy With Different Amounts Of Magnesium. Journal Composite Interfaces, 23 (6). pp. 519-531. ISSN 0927-6440

Alkahari, Mohd Rizal and Furumoto, Tatsuaki and Ueda, Takashi and Hosokawa, Akira (2014) Consolidation Characteristics Of Ferrous-Based Metal Powder In Additive Manufacturing. Journal Of Advanced Mechanical Design, Systems, And Manufacturing, 8 (1). pp. 1-16. ISSN 1881-3054

Ameenah, Am Abdul Aziz (2009) Kajian Dan Penghasilan Penapis Seramik Bagi Proses Tuangan Aloi Aluminium. Project Report. UTeM, Melaka, Malaysia. (Submitted)

C

Connie, Bato (2010) The Influence Of Aging Time To Mechanical Properties On Aluminum Silicon. Project Report. UTeM, Melaka, Malaysia. (Submitted)

F

Farahdatul Sahuda , Suhiri (2009) Effect Of Martempering Process On Plain Carbon Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

H

Hafizuddin, Zuhaimi (2013) The Effect Of Different Heat Treatment On Surface Retrogression On Aluminum Alloy 7075. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hazwan Hasif, Hamdan (2013) The Effect Of Crude Oil To The Corrosion Properties Of Petroleum Pipeline. Project Report. UTeM, Melaka, Malaysia. (Submitted)

J

Jusoh, Noor Muhammad Jamalluddin (2012) The Effect Of Aging Heat Treatment On Hardness And Mechanical Properties Of Aluminium Alloy. Project Report. UTeM, Melaka, Malaysia. (Submitted)

K

Kamarul Ariffin, Zakaria and Ad Suhadak, Fadrah Hanim and Mohd Razalli, Ammer Ezhar and Kassim, M.S (2017) Fatigue Damage Analysis Of Automobile Steering Knuckle Using Finite Element Analysis. ARPN Journal Of Engineering And Applied Sciences, 12 (14). pp. 4225-4228. ISSN 1819-6608

L

Lee , Mei Fang (2014) Effect of heat treatment conditions on aluminum alloy 6061 /. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Loh, , Xiao Hui (2013) Effect of heat treatment on hardness and impact strength of stainless steel. Project Report. UTeM, Melaka. (Submitted)

Low , Wen Jie (2010) Study Of Influence Of Retrogression And reaging (RRA) Treatments On Microstructure Evolution And Mechanical Properties Of Aluminium Alloy 7075. Project Report. UTeM, Melaka, Malaysia. (Submitted)

M

Mohamad Syafiq , Mokhtar (2013) The effect of heat treatment on the microstructures and mechanical properties of copper alloy. Project Report. UTeM, Melaka. (Submitted)

Mohammad Khalid, Khambali (2010) Investigation Of Fatigue Crack Growth On Heat Treated Aluminum 7075 With The Effect Of Corrosion. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Arshad, Mohd Khairul Azmi (2008) Microstructural Characterization Of Corrosion Products For Natural Gas Pipelines In Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fadzil, Nordin (2005) The Effects Of Heat Treatment On Mild Steel And Its Industrial Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fadzil, Nordin (2005) The Effects Of Heat Treatment On Mild Steel And Its Industrial Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fadzli, Abdollah and Rafidah, Hasan (2008) A Study On The Re-solution Heat Treatment Of An Aluminum Alloy (Kajian Ke Atas Rawatan Haba Semula Aloi Aluminum). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fahmi, Abdullah Sani (2009) Effect Of Heat Treatment Process Of Stainless Steel For Watch Manufacturing Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fasihin, Abd Satar (2010) Investigation Of Damage Process Due To Fatigue On Heat Treated Aluminum 7075 With Effect Of Corrosion. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Firdaus, Abd Rahim (2008) Mereka Bentuk Sebuah Pam Lumpur Anti Sumbat. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Khairulnizam , Muhamat Nawawi (2010) Investigation Of Damage Process Due To Fatigue On Heat Treated Aluminum 7075. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Rizal, Alkahari (2014) Consolidation Behavior Of Metal Power In Additive Manufacturing. PhD thesis, Universiti Teknikal Malaysia Melaka.

Muhammad Asif, Md Yusof (2012) Warpage Control Due To Heat Treatment Process On Conventional Furnace. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muzaffar Cheong, Ronaldin (2009) Heat Treatment Studies On Lead Casting. Project Report. UTeM, Melaka, Malaysia. (Submitted)

N

Nikmah , Abd Muin (2010) Solid Fuel From Empty Fruit Bunch Fiber And Recycled Material. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Shaufina , Md Ja'afar (2008) Effect Of Size And Shape Of Specimen On Hardness Of Steel Through Heat Treatment. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Suhaila, Muhammad (2013) Preparation Of Recycling Chip Aluminium (Al 6061) Through Powder Metallurgy Route. Project Report. UTeM, Melaka, Malaysia. (Submitted)

O

Omar, Bapokutty (2015) Kesan rawatan haba terhadap sifat mekanikal inconel 718 pada suhu tinggi. PhD thesis, UKM.

P

Phang, Chee Kong (2010) Mechanical And Thermal Properties Of Intermetallic NiAl For Automotive Body Applications. Project Report. UTeM, Melaka, Malaysia. (Submitted)

R

Rafidah, Hasan (2008) Surface Treatment Of Ferrous Alloys With Carbon And Boron. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rahfizan , Khairuzzaman (2013) An investigation on the influence of double heat treatment process on mild steel plate. Project Report. UTeM. (Submitted)

Rini , Ruslam (2009) Fabrication Of Alumina Crucible. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rohaya, Dali (2013) Design And Analysis Of Casted LM6 - Tic In Designing Of Production Tooling. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ros Suriayati, Musa (2008) Effect Of Type And Character Of Quenching Medium On Hardness Of Steel Through Heat Treatment. Project Report. UTeM, Melaka, Malaysia. (Submitted)

S

Saiful A-Fifuddin , Jail (2011) Comparison Of Hardness Properties Of Oxidised Al-Alloy And TI-Alloy For Duplex Coating Purpose. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sayed Kushairi, Sayed Nordin and Khairul Fadzli, Samad and Hamzah, Khairum (2014) Determinants of CO2 Emissions in ASEAN Countries Using Energy and Mining Indicators. In: International Conference on Mathematics, Engineering & Industrial Applications, 28th-30 May 2014, The Gurney Resort Hotel & Residences Penang, Malaysia. (In Press)

Shahidatul Mouna, Maulat Shahidan (2015) Investigation On Factor That Influence The Pack Boronizing Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shairulafizan, Muhammad Shamsuddin (2006) Heat Treatment Process Of Aluminium Alloy To Minimize The Precipitate Free Zones And It Effect To Wear Resistance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Khadhijah , Mohamad (2010) An Investigation Of Fracture Toughness On Heat Treated Aluminum Alloy 7075 With Effect Of Corrosion. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Y

Yang , Chee Heng (2010) Comparison Study On The Microstructure And Corrosion Rate Of Ti-6Al-4V. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Z

Zatil Hafila, Kamaruddin (2009) Kesan Proses Austenit Pembajaan Ke Atas Keluli Karbon Biasa. Project Report. UTeM, Melaka, Malaysia. (Submitted)

This list was generated on Sun Nov 19 23:37:28 2017 MYT.