Items where Subject is "T Technology"

,

Sri Mayasari (2025) A model for measuring the effectiveness of canting work stations in Indonesia’s hand-written batik industry. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

A

Abu Zaki, Muhammad Syafiq Syazwan (2025) The development of framework for a lightweight metallic drone frame using selective laser melting (SLM) 3D printing machine. Masters thesis, Universiti Teknikal Malaysia Melaka.

Arbain, Nurul Afiqah (2025) Investigation on physical, mechanical and wettability properties of 3D printed polyamide-12 membrane. Masters thesis, Universiti Teknikal Malaysia Melaka.

C

Che Hamid, Hazliza Aida (2025) Material selection, characterization, optimization, and usability of bio-composites using fused deposition modelling. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

H

Hamdi, Muhammad Haziq (2025) Model reference adaptive control based mopid controller for independent steer-by-wire system. Masters thesis, Universiti Teknikal Malaysia Melaka.

Hamzah, Aslam Hadi (2025) Investigating the effect of wall line numbers on the mechanical performance of developed RPET-HDPE composite filament in FDM 3D printing. Masters thesis, Universiti Teknikal Malaysia Melaka.

Hossain, Md Showkot (2025) Development and implementation of a three-phase TCHB multilevel inverter using NLC technique for PMSM drive applications. Masters thesis, Universiti Teknikal Malaysia Melaka.

I

Ishak, Norshahidatul Hasana (2025) Leveraging the auro model for the integration of humanoid robotic assistive tools in autism spectrum disorder intervention. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Ismail, Ronizam (2025) An enhanced relative proportional difference model to analyze sentiment intensity of Malaysian telecommunication opinions. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

J

Jahava, Marlina (2025) Effective scattering area on coated glass substrates using optical side coupling technique for sensitivity enhancement. Masters thesis, Universiti Teknikal Malaysia Melaka.

K

Kamarudin, Puteri Nur Farzanah Faghira (2025) Milk quality analysis with multimodal data fusion: combining image and numerical features. Masters thesis, Universiti Teknikal Malaysia Melaka.

Keek, Joe Siang (2025) Modelling of proportional controllers with counter-slippage mechanism for e-pattern omniwheeled cellular conveyor. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Khamis, Alias (2025) Intelligent algorithm based modeling of renewable and green energy resources for microgrid optimization. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

L

Lee, Jin Yao (2025) Estimation of Perovskite Solar Cell performance based on OghmaNano and COMSOL multiphysics modelling simulation. Masters thesis, Universiti Teknikal Malaysia Melaka.

M

Manap, Zahariah (2025) Hybrid indoor positioning utilizing multipath- assisted fingerprint and geometric estimation for single base station systems. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Mohamad, Nurul Nadia (2025) Mechanical and physical properties of polylactic acid based composite filament using statistical analysis in fused deposition modelling. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohammed Ba Amer, Rayan Ahmed (2025) High-Q factor of split ring resonator defected ground structure of microwave sensor for material characterization. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Nasir, Amal Muaz (2025) Passively Q-switched fibre laser generation for mid infrared using aluminium-based MAX phase materials. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Rahim, Farah Liyana (2025) Band gap tuning of lanthanum-doped CUSCN via chemical wet process in enhancing HTL for PSC. Masters thesis, Universiti Teknikal Malaysia Melaka.

Muhamad Sabri, Nurul Syahada (2025) New approach of sector rotation strategies for improving the dynamic and capability of induction motor. Masters thesis, Universiti Teknikal Malaysia Melaka.

N

Narayanan, Thinakaran (2025) Preparation and characterization of recycled high-density polyethylene hybrid composites for weathering and thermal aging performance. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Nazir Ali, Nornazurah (2025) Leakage current analysis of silicone rubber for high voltage insulation application. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Norhazlin, Nur Batrisyia (2025) Performance analysis of PLA based hybrid filament composites reinforced with SPF/WTR for 3D printing. Masters thesis, Universiti Teknikal Malaysia Melaka.

O

Omar, Mohd suhaimi (2025) Design parameters for military tactical surveillance unmanned aerial vehicle in tropical countries. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

P

Pang, Yee Jia (2025) Enhancing secondary school students’ attitude and career interests towards stem through robotics competition-based learning module. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

R

Rafique, Majid (2025) Multi-objective optimization for integrated task scheduling and load balancing in fog computing for IoT applications. Masters thesis, Universiti Teknikal Malaysia Melaka.

Rahiddin, Rahillda Nadhirah Norizzaty (2025) Texture representation for wood defect image classification using enhanced colour uniform local binary pattern. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Rayhan, Muhammad Arif (2025) Correlation study between plate thickness of pipe saddle support and pipe loading. Masters thesis, Universiti Teknikal Malaysia Melaka.

S

Sanaullah (2025) Design and development of a flexible microstrip multi-resonator for wearable chipless rfid tag applications. Masters thesis, Universiti Teknikal Malaysia Melaka.

Sanmugavelan, Kuberahventhan (2025) Investigation of graphene dopant concentration on europium oxide thick film using screen-printed method for carbon dioxide gas sensing. Masters thesis, Universiti Teknikal Malaysia Melaka.

Sharif, Emy Aqillah (2025) Effect of hotpress tool temperature on physical, thermal, and mechanical properties of polyphenylene sulfide composite. Masters thesis, Universiti Teknikal Malaysia Melaka.

Syed Ahmad Zawawi, Syed Abrar (2025) Hybrid stator flux locus strategy for enhancing torque control in high-speed induction motors. Masters thesis, Universiti Teknikal Malaysia Melaka.

U

Umami, Izzatul (2025) A framework of mobile learning acceptance and usage for micro-enterprises. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

W

Wong, Pee Shoong (2025) Three-point moving gradient with long short-term memory for stock prices time series forecasting. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Y

Yaakop, Sharul Nizam (2025) Utilization of waste heat recovery from air conditioning system for clothes drying application. Masters thesis, Universiti Teknikal Malaysia Melaka.

Yusri, Muhammad Sukriyllah (2025) A new inductive power transfer using integrated low loss dielectric technique on metamaterial. Masters thesis, Universiti Teknikal Malaysia Melaka.

Yusri, Muhammad Yuszairie (2024) Wireless A/C compressor vibration diagnostics using machine learning-based signal analysis Z-Freq 2D with refrigerant and oil as faults. Masters thesis, Universiti Teknikal Malaysia Melaka.

Z

Zaiham, Nur Afiqah Aina (2025) Streaming in oscillatory flow through porous channels in thermoacoustics. Masters thesis, Universiti Teknikal Malaysia Melaka.

Zaini, Muhammad Aizat Zaim (2025) Q-switched and mode-locked erbium doped pulsed fiber laser using Molybdenum Titanium Aluminum Carbide as saturable absorber. Masters thesis, Universiti Teknikal Malaysia Melaka.