Items where Division is "Faculty of Manufacturing Engineering" and Year is 2018

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Jump to: A | B | E | H | I | J | K | L | M | N | O | S | Y
Number of items: 47.

A

A Rahman, Muhamad Arfauz and Mohamad, Nor Rizan and Mustafa, Zaleha and Ismail, Syahriza and Abdul Rahman, Azrul Azwan and Abdullah, Shariman and Mohamad, Effendi and Nordin, Mohd Hisham and Salleh, Mohd Rizal (2018) Design Of Compact Pre-Pregger Machine For In House Production Of Pre-Preg Material. Journal Of Advanced Manufacturing Technology (JAMT) , 12 (1 (2)). pp. 437-449. ISSN 1985-3157

A. Perumal, Puvanasvaran and M. N. H., Ab. Hamid and Yoong, Sai Sieng (2018) Cycle Time Reduction For Coil Setup Process Through Standard Work: Case Study In Ceramic Industry. ARPN Journal Of Engineering And Applied Sciences, 13 (1). pp. 210-220. ISSN 1819-6608

Abd Aziz, Norfarhana (2018) Electrical And Thermomechanical Properties Of Epoxy Filled Hybrid Covalent Treated MWCNTs/GNPs Nanocomposites. Masters thesis, Universiti Teknikal Malaysia Melaka.

Abd Rahim, Toibah and Misran, F. and Mustafa, Zaleha and Shaaban, Azizah and Shamsuri, Siti Rahmah (2018) Calcium Phosphate From Waste Animal Bones:Phase Identification Analysis. Journal Of Advanced Manufacturing Technology, 12. pp. 97-109. ISSN EISSN: 2289-8107

Abd Rahman, M.N. and Medjahed, Brahim and Orady, Elsayed A. and Muhamad, Martini Ridha and Abdullah, Rohana and Mohamad Jaya, Abdul Syukor (2018) A Review Of Cloud Manufacturing: Issues And Opportunities. Journal of Advanced Manufacturing Technology (JAMT), 12 (1). pp. 61-75. ISSN 1985-3157

Abd Rahman, Md Nizam and Muhamad, Mohd Razali and Sulaiman, Mohd Amri and Hashim, Zarifah Syazana and Fadzil, Ahmad Anuar and Budi, Esmar (2018) Copper Layer Sheet Resistance Evolution As A Function Of Post-Seed Process Self-Annealing Time. Journal of Advanced Manufacturing Technology, 12 (SI4). pp. 15-24. ISSN 1985-3157

Abdullah, Lokman and Anang, Nur Amira and Jamaludin, Zamberi and Chiew, Tsung Heng and Maharof, Madihah and Syed Salim, Syed Najib and Retas, Zain (2018) Analysis Of Nonlinear PID Controller For Tracking Performance Of Ball Screw Drive. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 10 (2-2). pp. 67-71. ISSN 2180-1843

Abu Bakar, Mohd Hadzley and Fahmi, Naim and Mokhtar, Faiz and Tamin, Nor Fauzi and Azlan, Umar Al-Amani and Adam, Abdul Aziz and Raja Abdullah, Raja Izamshah and Kasim, Mohd Shahir (2018) Fabrication And Machining Performance Of Powder Compacted Alumina Based Cutting Tool. MATEC Web Of Conferences, 150. pp. 1-5. ISSN 2261-236X

Ahmad, Nadiah and Halim, Isa and Radin Umar, Radin Zaid and Jamli, Mohamad Ridzuan and Syed Mohamed, Muhammad Syafiq and Albawab, Tarek Mhd Moataz and Abdullah, Muhammad Haziq Lim and Padmanathan, Vinothini (2018) Usability Study Of Integrated Rula-Kinect System For Work Posture Assessment. International Journal Of Integrated Engineering, 10. pp. 175-184. ISSN 2229-838X

B

Bamatraf, Fahmi Jamil Umer (2018) Production capacity losses analysis in manufacturing sector : A case study of UAE ductile iron pipes manufacturing industry. Masters thesis, Universiti Teknikal Malaysia Melaka.

E

Ebrahim, Zuhriah and Muhamad, Mohd Razali and Abdul Rasib, Amir Hamzah (2018) Inefficient processing time as hidden time loss in assembly operations. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 10 (10). pp. 1-5. ISSN 2180 – 1843

H

Harun, Nurul Hatiqah and Kasim, Mohd Shahir and Zainal Abidin, Muhammad Zaimi and Raja Abdullah, Raja Izamshah and Attan, Hassan and Ganesan, Hema Nanthini (2018) A Study On Surface Roughness During Fused Deposition Modelling: A Review. Journal Of Advanced Manufacturing Technology (JAMT) , 12 (1 (1)). pp. 25-35. ISSN 1985-3157

Hasan, Muhammad Syahid and Ebrahim, Zuhriah and Wan Mahmood, Wan Hasrulnizzam and Ab. Rahman, Mohd Nizam (2018) Factor influencing enterprise resource planning system: A review. Journal of Advanced Manufacturing Technology (JAMT) , 12 (1). pp. 247-258. ISSN 1985-3157

I

Ishak, Anuar and Mohamad, Effendi and Sukarma, Lukman and Salleh, Mohd Shukor and Salleh, Mohd Rizal and Mohamad, Noraiham and Raja Abdullah, Raja Izamshah and Md Ali, Mohd Amran (2018) Cleaner Production Implementation In An E-Waste Recovery Plant By Using The Value Stream Mapping. Journal Of Advanced Manufacturing Technology (JAMT) , 12 (1 (2)). pp. 55-67. ISSN 1985-3157 (Unpublished)

J

Jamaludin, Zamberi and Chiew, Tsung Heng and Bani Hashim, Ahmad Yusairi and Rafan, Nur Aidawaty and Abdullah, Lokman (2018) Optimization of super twisting sliding mode control gains using Taguchi method. Industrial Engineering & Management Systems, 17. pp. 62-71. ISSN 2234-6473

Jamaludin, Zamberi and Mat Seman, Norhidayah and Minhat, Mohamad and Che Ku Junoh, Sahida (2018) Design Of A CAD/CAM-Simulink Data Exchange System For Machine Tool Application. Journal Of Advanced Manufacturing Technology (JAMT) , 12 (1(2)). pp. 1-13. ISSN 1985-3157

Jamaludin, Zamberi and Huong , Chung Yu and Abdullah, Lokman and Nordin, Mohd Hisham and Abdullah, M. F. and Haron, R. and Jalal, K. B.A. (2018) Automated Tracking System Using RFID For Sustainable Management Of Material Handling In An Automobile Parts Manufacturer. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 10. pp. 35-40. ISSN 2180-1843

K

Kamat, Seri Rahayu and Ani, Mohammad Firdaus and M, Mohamad and Hambali, Ruzy Haryati and Husain, Kalthom (2018) A Study Of Psychophysical Factor (Heart Rate) For Driver Fatigue Using Regression Model. Malaysian Journal Of Public Health Medicine (MJPHM), 2. pp. 1-9. ISSN 1675-0306

Kasim, Mohd Shahir and Che Haron, Che Hassan and A Ghani, Jaharah and Raja Abdullah, Raja Izamshah and Akmal, Suriati and Md Ali, Mohd Amran and Abu Bakar, Mohd Hadzley and Salleh, Mohd Shukor (2018) Investigation Of Tangential Force On Ball Nose Rake Face During High-Speed Milling Of Inconel 718. Advances In Materials And Processing Technologies, 4 (3). pp. 1-7. ISSN 2374-0698

L

Liew, Pay Jun and Mohd Hajazi, Aini Syahida and Shaaroni, Ainusyafiqah and Sulaiman, Mohd Amri and Raja Abdullah, Raja Izamshah (2018) Investigation Of Effects Of Carbon Nanofiber Nanofluid In Drilling Of AISI 304 Stainless Steel. Journal Of Advanced Manufacturing Technology (JAMT) , 12 (1 (2)). pp. 491-500. ISSN 1985-3157

Liew, Pay Jun and Zainal, Nurlishafiqa and Ahsan, Qumrul and Zhou, T. and Yan, J. (2018) Experimental Investigation Of RB-SiC Using Cu–CNF Composite Electrodes In Electrical Discharge Machining. The International Journal Of Advanced Manufacturing Technology, 98 (9-12). pp. 3019-3028. ISSN 0268-3768

M

Mat Seman, Norhidayah and Jamaludin, Zamberi and Minhat, Mohamad (2018) System Interface Design For CAD/CAM-Simulink Data Exchange System Using MATLAB. Intelligent Manufacturing & Mechatronics, LNME. pp. 639-647. ISSN 2195-4356

Mat Yaacob, Mohd Noor Alhadi (2018) Electroless Nickel Deposition On Surface Activated Kenaf Fiber. Masters thesis, Universiti Teknikal Malaysia Melaka.

Md Ali, Mohd Amran and Abdullah, Abu and Mohamad, Effendi and Salleh, Mohd Shukor and Hussein, Nur Izan Syahriah and Muhammad, Z. and Dahaman, Shamshulizam (2018) Tensile properties of ternary blends for HDPE/PP/Recycle HDPE in blow moulding process. Journal Of Advanced Manufacturing Technology (JAMT) , 12 (1(2)). pp. 31-41. ISSN 1985-3157

Md Fauadi, Muhammad Hafidz Fazli and Akmal, Suriati and Mat Ali, Mahasan and Anuar, Nurul Izah and Ramlan, Samad and Mohamed Noor, Ahamad Zaki and Awang, Nurfadzylah (2018) Intelligent Vision-Based Navigation System For Mobile Robot: A Technological Review. Periodicals Of Engineering And Natural Sciences (PEN), 6 (2). pp. 47-57. ISSN 2303-4521

Mohamad, Nor Rashidah and Md Fauadi, Muhammad Hafidz Fazli and Jafar, Fairul Azni and Mohamed Noor, Ahamad Zaki and Nordin, Mohd Hisham (2018) Simulation-Based Multi-Objective Optimization For Distributed Material Transportation System. International Journal Of Engineering & Technology, 7 (3.20). pp. 92-94. ISSN 2227-524X

Mohamad, Nor Rashidah and Md Fauadi, Muhammad Hafidz Fazli and Zainudin, Siti Fairus and Mohamed Noor, Ahamad Zaki and Jafar, Fairul Azni and Mat Ali, Mahasan (2018) Optimization Of Material Transportation Assignment For Automated Guided Vehicle (AGV) System. International Journal Of Engineering & Technology, 7 (3.20). pp. 334-338. ISSN 2227-524X

Mohamad, Noraiham and Abd Latiff, Anisah and Abd Manaf, Mohd Edeerozey and Ab Maulod, Hairul Effendy and Shueb, Mohammed Iqbal and Munawar, Rose Farahiyan and Raja Abdullah, Raja Izamshah and Kasim, Mohd Shahir and Mazlan, Mazliah and Abd Razak, Jeefferie and Mohd Abid, Mohd Asyadi Azam (2018) Wear Characteristics Of Recycled Carbon Fibre-Filled Polypropylene Composites Via Acidic Surface Treatment. World Review Of Science,Technology And Sust. Development, 14 (2/3). pp. 165-179. ISSN 1741-2234

Mohamad, Noraiham and Mazlan, Mazliah and Ab Maulod, Hairul Effendy and Abdul Razak, Jeefferie and Hamdan, Mohd Mef’at (2018) Rebound Resilience Of Natural Rubber Composites Via Response Surface Methodology. Proceedings Of Mechanical Engineering Research Day 2018, 1. pp. 130-131. ISSN 978-967-2145-20-2

Mohamad Yatim, Norazlina and Dimin @ Mohd Amin, Mohd Fairuz and Shaaban, Azizah and Yusof, Faridah and Abd Razak, Jeefferie (2018) Effect of functionalised and non-functionalised carbon nanotubes-urea fertilizer on the growth of paddy. Tropical Life Sciences Research, 29 (1). pp. 17-35. ISSN 1985-3718 (Submitted)

Mohamad Yatim, Norazlina and Shaaban, Azizah and Dimin @ Mohd Amin, Mohd Fairuz and Yusof, Faridah and Abd Razak, Jeefferie (2018) Effect of functionalised and non-functionalised carbon nanotubes-urea fertilizer on the growth of paddy. Tropical Life Sciences Research, 29 (1). pp. 17-35. ISSN 1985-3718

Mohamed Noor, Ahamad Zaki and Md Fauadi, Muhammad Hafidz Fazli and Zulkifli, Nur Zul Hafiq and Abdul Basit, Muhamad Naqib and Jafar, Fairul Azni and Mohamad, Nor Rashidah (2018) Computation Of Fuzzy Analytic Hierarchy Process (FAHP) Using Matlab Programming In Sustainable Supply Chain. International Journal Of Engineering & Technology, 7 (3.20). pp. 82-86. ISSN 2227-524X

Mohamed Sultan, Al Amin (2018) Managing Supply Chain Complexity: Foresight For Wind Turbine Composite Waste. Procedia CIRP, 69. pp. 938-943. ISSN 2212-8271

Mohd Suan, Mohd Shahadan and Ahmad, Nurulnabilah and Ismail, Syahriza and A. Bakar, F. I. (2018) Synthesis Of a Fe2o3 Nanowires/MWCNTS Composite For Photocatalyst. Journal of Physics: Conference Series, 1082. 012048. ISSN 1742-6596

Munawar, Rose Farahiyan and Arif, Afrana Baiti and Mohamad, Noraiham and Dimin @ Mohd Amin, Mohd Fairuz and Mohd Suan, Mohd Shahadan and Othman, Intan Sharhida and Hasib, Hazman and Abu, Maisarah and Radiman, Shahidan and Mohd Hassan, Nurul Husna (2018) Effect of different cooking temperature and alkalinity on mechanical and morphological properties of composite sheet from durian shell waste fibre. Journal of Advanced Manufacturing Technology, 12 (1(3)). pp. 23-34. ISSN 1985-3157

Mustafa, Zaleha and Ishak, Nor Fatiha and Othman, Radzali and Ahmad, Nor Naimah Rosyadah and Abd Rahim, Toibah and Sheikh Md Fadzullah, Siti Hajar and Tanner, K. Elizabeth (2018) In-Vitro Apatite Growth On Porous Â-Tricalcium Phoshpate Scaffolds Coated With PHVB. Journal Of Advanced Manufacturing Technology, 12. pp. 135-146. ISSN 2289-8107

Musthaffa, Azrul Affandhi and Mohamad Nor, Norazman and Yusof, Mohammed Alias and Yaakob, Mohd Yuhazri (2018) New Conceptual Design Of Portable Bamboo Bridge For Emergency Purposes. AIP Conference Proceedings, 1930 (1). pp. 1-9. ISSN 0094-243X

N

Nirmal, Umar and Albawab, Tarek Mhd Moataz and Halim, Isa and Ahmed Salem, Mohammed and Elsayed, Mahmoud and Singh, Jasspeed (2018) A review on tribological wear test rigs for various applications. International Journal Of Integrated Engineering, 10. pp. 202-217. ISSN 2600-7916

O

Othman, Radzali and Mustafa, Zaleha and Ishak, Nor Fatiha and Pham, Trung Kien and Shamsudin, Zurina and Mohd Rosli, Zulkifli and Mohd Noor, Ahmad Fauzi (2018) Intermediate Phases Formed During Synthesis Of β-Tricalcium Phosphate Via Wet Precipitation And Hydrothermal Methods. Journal Of Advanced Research In Fluid Mechanics And Thermal Sciences, 48 (2). pp. 141-147. ISSN 2289-7879

S

Salim, Mohd Azli and Mokhlis, M. and Masripan, Nor Azmmi and Md.Saad, Adzni and Omar, Ghazali (2018) Nano Indentation Studies On Graphene Nanoparticles Reinforced Epoxy Resin As Conductive Ink. International Journal Of Advanced Materials Characterization, 1. pp. 8-11. ISSN 2227-3886/2347-1891

Salim, Nur Anis Suraya (2018) Analysis On The Performance Of The Blade Design For The Wind Turbine System From An Air Conditioner System. Masters thesis, Universiti Teknikal Malaysia Melaka.

Salleh, Mohd Shukor and Mohamad Ishak, Nurul Naili and Yahaya, Saifudin Hafiz and Subramonian, Sivarao and Abdullah, A. (2018) Effect Of Equal Channel Angular Pressing On The Microstructure And Mechanical Properties Of A356 Alloy. Journal Of Advanced Manufacturing Technology, 12. pp. 23-39. ISSN 1985-3157

Salleh, Mohd Shukor and Minhat, Mohamad and Hussein, Nur Izan Syahriah and Abdul Rahim, Mohd Aidil Shah (2018) A Comprehensive Review On Cold Work Of AISI D2 Tool Steel. Metallurgical Research & Technology, 115 (1). pp. 1-12. ISSN 2271-3646

Sam, Mei Lee and Saptari, Adi and Salleh, Mohd Rizal and Mohamad, Effendi (2018) Comparison Between Linear Programming And Integer Linear Programming: A Review. International Journal Of Mathematics In Operational Research (IJMOR), 13 (1). pp. 91-106. ISSN 1757-5850

Sulaiman, Mohd Amri and Mat, Siti Asiyah and Razak, Muhammad Shahmi and Ramle, Zuraimi and Mohamad, Effendi and Che Haron, Che Hassan and A Ghani, Jaharah (2018) Performance Of CVD Coated Carbide Tool By Optimizing Machining Parameters During Turning Titanium Alloy Ti-6AL-4V ELI In Flooded Condition. Journal Of Advanced Manufacturing Technology (JAMT) , 12 (1 (2)). pp. 401-412. ISSN 1985-3157

Y

Yahaya, Saifudin Hafiz and Yaakob, Mohd Yuhazri and W.N., Hidayah and Haeryip , Sihombing and Sulaiman, Shamsudin and A.M, Kamarul (2018) Kansei Engineering Approach For The Customers Preferences Of Car Design. Advances in Intelligent Systems and Computing, 739. pp. 289-295. ISSN 2194-5357

Yahaya, Saifudin Hafiz and W. N., Hidayah and Salleh, Mohd Shukor and Abdullah, Abu and H., Sihombing (2018) Customer Preferences In Car Design Using Kansei Engineering And Cubic Bezier Curve. International Journal Of Engineering & Technology, 7 (4). pp. 4170-4173. ISSN 2227-524X

This list was generated on Fri Mar 29 03:10:00 2024 +08.