Items where Division is "Faculty of Mechanical Engineering > Department of Structure and Materials" and Year is 2013

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Jump to: A | B | D | H | M | O | P | R | S | W | Y | Z
Number of items: 51.

A

Abd Latif, M.J. and Ismail, N.R.A. and Ramlan, R. and Mahmud, J. and Abdul Kadir, M.R. (2013) Sensitivity Study of Surface Curvature in Characterisation Of Cartilage Mechanical Properties. Applied Mechanics and Materials, 393. pp. 941-946. ISSN 1660-9336

Abd Latif, M.J. and Hashim, N.H. and ramlan, roszaidi and Mahmud, J. and Jumahat, A. and Abdul Kadir, M.R. (2013) The Effects of Surface Curvature on Cartilage Behaviour in Indentation Test: A Finite Element Study. Procedia Engineering . pp. 109-115. ISSN 1877-7058

Abd Samad, Md Fahmi and Hishamuddin, Jamaluddin and Robiah, Ahmad and Mohd Shafiek, Yaacob and Abul K. M., Azad (2013) Effect of Penalty Function Parameter in Objective Function of System Identification. International Journal of Automotive and Mechanical Engineering (IJAME), 7. pp. 940-954. ISSN 2180-1606

Abdullah, Yasseer and Putra, Azma and Efendy, Hady and Wan Mohamad, Wan Mohd Farid and Ayob, Md Razali (2013) Investigation on sound absorption coefficient of natural paddy fibers. International Journal of Renewable Energy Resources, Vol. 3 (1). pp. 8-11. ISSN 2289-1846

Ahmad, Mohd Shakir and Selamat, Mohd Zulkefli and Mohd Daud, Mohd Ahadlin and Mohamad Yunus, Indera Kasuma and Azman, Mohd Syafiq (2013) Effect of Different Filler Materials in the Development of Bipolar Plate Composite for Polymer Electrolyte Membrane Fuel Cell (PEMFC). Applied Mechanics and Materials, 315 (2013). pp. 226-230. ISSN 10.4028/www.scientific.net/AMM.315.226

Ali, Mohd Basri and Abdullah, Shahrum and Nuawi, Zaki and Ariffin, Ahmad Kamal (2013) Correlation of absorbed impact with calculated strain energy using an instrumented Charpy impact test. Indian Journal of Engineering & Materials Sciences, 20. pp. 504-514. ISSN 0975-1017

Azmi, M.N and Rafeq, Saleman Abdul and Nadlene, Razali and Irwan, M.A.M and Aishah, A.M. (2013) TENSILE AND HARDNESS PROPERTIES OF KENAF-PP/PLA COMPOSITE FILLED NANOCLAY. In: International Conference on Engineering and ICT (ICEI2012), 4 - 5 APRIL 2012, BANDA HILIR, MELAKA.

B

Bapokutty, Omar and Sajuri, Zainuddin and Junaidi, Syarif (2013) Stress relaxation behaviour and mechanism of heat treated inconel 718 in high temperature environments. Journal of Industrial Technology SIRIM, 21 (1). pp. 43-51. ISSN 0128-4940

D

Dhar Malingam, Sivakumar and Kalyanasundaram, Shankar (2013) Temperature effect on forming of self- reinforced polypropylene based lightweight metal composite structure. Journal of Engineering and Technology, 4 (1). pp. 147-157. ISSN 2180-3811

Dhar Malingam, Sivakumar and Kalyanasundaram, Shankar (2013) Temperature effect on forming of self- reinforced polypropylene based lightweight metal composite structure. Journal of Engineering and Technology, 4 (1). pp. 147-157. ISSN 2180-3811

H

Hanafi, M. H and Wan Mahmood, W. M. F and Roslizar, Aiman and Zakaria, M. S. and Saadun, M. N. A and Rafeq, Saleman Abdul (2013) Analysis of Soot Particle Movement in Diesel Engine under the Influence of Drag Force. Applied Mechanics and Materials. pp. 275-280. ISSN 1660-9336

M

Masripan, Nor Azmmi and Yuki , Miyahira and Hidenori, Nishimura and Takayuki, Tokoroyama and Noritsugu , Umehara and Yoshio, Fuwa (2013) Effect of Transfer Layer on Ultra Low Friction of CNx Coating under Blowing Dry Ar. Tribology Online. pp. 219-226. ISSN 1881-2198

Masripan, Nor Azmmi and Ohara , Kenji and Umehara, Noritsugu and Kousaka, Hiroyuki and Tokoroyama, Takayuki and Inami, Shigeru and Zushi, Koji and Fujita, Masahito (2013) Hardness Effect Of DLC On Tribological Properties For Sliding Bearing Under Boundary Lubrication Condition In Additive-Free Mineral Base Oil. Tribology International, 65. pp. 265-269. ISSN 0301-679X

Mines, R.A.W and Tsopanos, S. and Shen, Y. and Rafidah, Hasan and McKown, S.T. (2013) Drop weight impact behaviour of sandwich panels with metallic micro lattice cores. INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, 60. pp. 120-132. ISSN 0734-743X

Mohd Daud, Mohd Ahadlin and Nasir, Nurulhilmi Zaedah and Rivai, Ahmad and Selamat, Mohd Zulkefli (2013) Dynamic Fracture Toughness of Magnesium Alloy under Impact Loading Conditions. Procedia Engineering, 53. pp. 639-644. ISSN 1877-7058

Mohd Khairi, Mohamed Nor and Okubo, Shigenori (2013) The Design of Nonlinear Servo System using Fuzzy Method. IEEJ Transactions on Electronics, Information and Systems. pp. 652-662. ISSN 0385-4221

Mohd Sahri, Mohd Ridhuan and Che Muhamad, Che Muhamad Khairul Iezuadi and Abd. Latif, Mohd Juzaila and Mahmud, Jamaluddin (2013) Parametric Study Of Low Velocity Impact Using Finite Element Analysis. Applied Mechanics and Materials, 393. pp. 397-402. ISSN 1660-9336

O

Ohara, Kenji and Masripan, Nor Azmmi and Umehara, Noritsugu and Kousaka, Hiroyuki and Tokoroyama, Takayuki and Inami, Shigeru and Zushi, Koji and Fujita, Masahito (2013) Evaluation Of The Transformed Layer Of DLC Coatings After Sliding In Oil Using Spectroscopic Reflectometry. Tribology International, 65. pp. 270-277. ISSN 0301-679X

P

Pokaad, Alif Zulfakar and Khisbullah , Hudha and Md Radzai , Said (2013) Usage of Magnetorheological Damper in Active Front Bumper System for Frontal Impact Protection. Applied Mechanics and Materials, 315. pp. 40-44. ISSN 1662-7482

Putra, Azma (2013) The Effect of Uncertainty in the Excitattion on the Vibration Input Power to a Structure. Advance in Acoustics and Vibration, 2013. pp. 1-18. ISSN 1687-627X

Putra, Azma and Ismail, Ahmad Yusuf and ramlan, roszaidi and Ayob, Md Razali and Sajidin, Muhammad (2013) Normal incidence of sound transmission loss of a double-leaf partition inserted with a micro-perforated panel. Advance in Acoustics and Vibration. pp. 1-24. ISSN 1687-627X

Putra, Azma (2013) Fabricating Process and Mechanical Properties of Elastomeric Mount. In: The 7th South East Asia Technical University Consortium (SEATUC) Symposium , March, 4-6 2013, Bandung, Indonesia.

Putra, Azma (2013) Utilizing Sugarcane Wasted Fibers As A Sustainable Acoustic Absorber. Procedia Engineering, 53. pp. 632-638. ISSN 1877-7058

Putra, Azma and Abdullah, Yasseer and Efendy, Hady and Wan Mohamad, Wan Mohd Farid and Salleh, Nor Liana (2013) Biomass from paddy waste fibers as sustainable acoustic material. Advances in Acoustics and Vibration, 2013. pp. 1-8. ISSN 1687-627X

Putra, Azma and Abdullah, Yasseer and Efendy, Hady and Wan Mohamad, Wan Mohd Farid and Salleh, Nor Liana (2013) Biomass from paddy waste fibers as sustainable acoustic material. Advances in Acoustics and Vibration, 2013. pp. 1-7. ISSN 1687-627X

Putra, Azma and Ismail, Ahmad Yusuf and Ayob, Md Razali (2013) SOUND TRANSMISSION LOSS OF A DOUBLE-LEAF PARTITION WITH MICRO-PERFORATED PLATE INSERTION UNDER DIFFUSE FIELD INCIDENCE. International Journal of Automotive and Mechanical Engineering (IJAME), 7 (Januar). pp. 1086-1095. ISSN ISSN: 2180-1606

Putra, Azma and Kassim, Dayang H. and YAAKOB, MOHD YUHAZRI and Abdullah, Y and Muhammad, Nor S. and Jenal, Rustamreen and Nor, Mohd Jailani M. (2013) ASSESSMENT OF THE ACOUSTICAL PERFORMANCE IN MALACCA MOSQUE,MALAYSIA: A CASE STUDY ON THE SAYYIDINA ABU BAKAR MOSQUE. Proceedings of the 20th International Congress on Sound & Vibration. pp. 1-8. ISSN 2329-3675

Putra, Azma and Kassim, Dayang H. and Yakoob, Mohd. d and Nor, M. J. M (2013) Study on the Use of Micro-Perforated Panel to Improve Acoustic Performance in Mosque. Applied Mechanics and Materials, 393. pp. 971-975. ISSN 1660-9336

Putra, Azma and Muhammad, Noryani and Shyafina, Nurain and Thompson, David J. (2013) RADIATION EFFICIENCY OF A PERFORATED PANEL MODELLED USING ELEMENTARY SOURCE TECHNIQUE. Proceedings of the 20th International Congress on Sound & Vibration. pp. 1-8. ISSN 2329-3675

Putra, Azma and Saari, Noor Fariza and Bakri, Hairul and Ramlan, Roszaidi and Mat Dan, Reduan (2013) Characterisation of structure-borne sound source using reception plate method. The Scientific World Journal, 2013. pp. 1-9. ISSN 1537-744X

Putra, Azma and Susilo, Sidik (2013) Modeling of Dynamic Response of Beam-Type Vibration Absorbing System Excited by a Moving Mass. International Review of Mechanical Engineering. pp. 813-820. ISSN 1970-8734

R

RIDHWAN, JUMAIDIN and Rafidah , Hasan and Zulfattah, Z. (2013) EFFECT OF AGING ON THE MICROSTRUCTURES AND MECHANICAL PROPERTIES OF C102 COPPER ALLOY. Journal of Engineering and Technology, 4 (2). pp. 115-124. ISSN 2180-3811

Ridhwan, J. and Selamat , M.Z. and Zulfattah, Z. (2013) Effect of Cooling Rate on The Microstructures And Hardness Of Fe-Ni-Cr Superalloy. Journal of Mechanical Engineering and Technology, 5 (1). pp. 45-57. ISSN 2180 – 1053

Ridhwan, J. and Zulfattah, Z. and Selamat, Mohd Zulkefli and Hafidzal, M.H.M (2013) EFFECT OF AGING TREATMENT ON THE MICROSTRUCTURES AND HARDNESS OF Fe-Ni-Cr SUPERALLOY. International Journal of Automotive and Mechanical Engineering, 8 (1). pp. 1430-1411. ISSN 2180-1606

S

S. G. Herawan and M. S. Hadi and Md. R. Ayob and Putra, Azma (2013) Characterization of Activated Carbons from Oil-Palm Shell by CO2 Activation with No Holding Carbonization Temperature. The Scientific World journal, 2013. pp. 1-6. ISSN 1537-744X

Said, Md Radzai and Hasan, Nor Halim and Leman, A.M. and Abd Rahman, Majahar (2013) Baseline Inspection and Measurement of Local Exhaust Ventilation (LEV) Systems at Spray Booth in Manufacturing Plant. The Journal of Selcuk University Natural and Applied Science, ICOEST (Specia). pp. 637-647. ISSN 2147-3781

Salim, Mohd Azli and ABDULLAH, Mohd Azman and Noordin, Aminurrashid and Jusoff, Kamarulzaman and Md Zin, Mohd Zarhamdy (2013) Modeling, Simulation and Verification of Parameters Study on Flexible Automotive Wiper. Advanced Science Letters, 19 (1). pp. 106-112. ISSN 1936-6612

Salim, Mohd Azli and Putra, Azma and ABDULLAH, Mohd Azman and Noordin, Aminurrashid and Tee, Boon Tuan (2013) Peak Amplitude Transmission on High-Rise Structure by Implementing TMD Method. Advanced Science Letters, 19 (1). pp. 142-146. ISSN 1936-6612

Salim, Mohd Azli and Putra, Azma and ABDULLAH, Mohd Azman and Thompson, David and Ahmad, Nazirah (2013) Transmissibility of a Laminated Rubber-Metal Spring: A Preliminary Study. Applied Mechanics and Materials. pp. 661-666. ISSN 1660-9336

Salim, Mohd Azli and Putra, Azma and Thompson, David J. and Ahmad, Nazirah and Abdullah, Mohd Azman (2013) Transmissibility of a laminated rubber-metal spring: a preliminary study. Applied Mechanics and Materials, 393. pp. 661-665. ISSN 1662-7482

Selamat, Mohd Zulkefli and Ahmad, Mohd Shakir and Mohd Daud, Mohd Ahadlin and Jusoff, Kamaruzaman (2013) The Hybrid Conductive Filler in the Bipolar Plate for Polymer Electrolyte Membrane Fuel Cells. The Hybrid Conductive Filler in the Bipolar Plate for Polymer Electrolyte Membrane Fuel Cells, 7 (3). pp. 72-77. ISSN ISSN 1991-8178

Selamat, Mohd Zulkefli and Ahmad, Mohd Sakir and Mohd Daud, Mohd Ahadlin and Ahmad, Narisa (2013) Effect of Carbon Nanotubes on Properties of Graphite/Carbon Black/Polypropylene Nanocomposites. Advanced Materials Research, 795 (2013). pp. 29-34. ISSN 10.4028/www.scientific.net/AMR.795.29

Sivakumar, Dhar Malingam (2013) Effect of process parameters during forming of self reinforced – PP based Fiber Metal Laminate. Composite Structures, 97. pp. 332-337. ISSN 0263-8223

W

Wai, Chee Mun and Rivai, Ahmad and Bapokutty, Omar (2013) Effect of elements on linear elastic stress analysis: A finite element approach. International Journal of Research in Engineering and Technology (IJRET), 02 (10). pp. 561-567. ISSN eISSN: 2319-1163 | pISSN: 2321-7308

Wai, Chee Mun and Rivai, Ahmad and Bapokutty, Omar (2013) Modelling optimization involving different types of elements in finite element analysis. In: 2nd International Conference on Mechanical Engineering Research (ICMER 2013), 1-4 July 2013, Kuantan, Pahang, Malaysia.

Y

Yuhazri, M.Y. and Jennise, T.T.T. and Sihombing, H. and M. Radzai , Said and Nirmal, U. and Megat Ahmad, M.M.H. (2013) Tensile Properties of Angle Cured Laminated Composites Structures under Gravity Effects. Applied Mechanics and Materials, 465-46. pp. 101-105. ISSN 1662-7482

Z

Zainal Abidin, M.I. and Mahmud, J. and Abd Latif, M.J. and Jumahat, A. (2013) Experimental and Numerical Investigation of SUP12 Steel Coil Spring. Procedia Engineering . pp. 251-257. ISSN 1877-7058

Zakaria, Kamarul Ariffin (2013) Elevated Temperature Fatigue Life Investigation of Aluminium Alloy based on the Predicted S-N Curve. Jurnal Teknologi, UTM. pp. 75-79. ISSN 0127-9696

Zakaria, Kamarul Ariffin (2013) Comparative study of fatigue life behaviour of AA6061 and AA7075 alloys under spectrum loadings. Materials and Design, 49. pp. 48-57. ISSN 0261-3069

Zakaria, Kamarul Ariffin (2013) Influence of spectrum loading sequences on fatigue life in a high-temperature environment. Engineering Failure Analysis, 30. pp. 111-123. ISSN 0025-5300

Zulfattah, Z. M and Rafeq, Saleman Abdul and Shukri, Z. M. and Ridhwan, J. and Hanafi, M. H. M and Norain, I and Huzaimi, Z. N. and Najib, A. M. (2013) Gnielinski method in calculating the heat transfer coefficient for metallic solar tower absorber. In: The Malaysian International Tribology Conference 2013, MITC2013, 18 - 20 NOVEMBER 2013, KOTA KINABALU, SABAH. (Unpublished)

This list was generated on Sat Mar 30 01:58:33 2024 +08.