Kasim, Mohd Shahir and Che Haron, Che Hassan and A Ghani, Jaharah and Gusri, Akhyar Ibrahim and Mohd Zaid, Abdul Yazid and Sulaiman, Mohd Amri (2013) Tool Life Of TiAlN PVD Coated Carbide Tool In High-Speed End Milling Of Untreated Inconel 718 Under Minimum Quantity Lubrication Condition. Sains Malaysiana, 42 (12). pp. 1721-1726. ISSN 0126-6039
|
PDF
05_M.S._Kasim.pdf - Published Version Download (2MB) |
Abstract
This paper presents the tool life of the end milled Inconel 718, which is part of a material that is difficult to be machined. Previous researchers found that tool life in machining aged Inconel 718 is shorter compared with other materials. However, this observation required further investigation. Thus, a raw grade Inconel was proposed in this experiment. The experiments were performed using TiAlN-coated carbide. The studied milling parameters were the cutting speed, Vc, from 90 to 150 m/min; feed rate, fz, from 0.15 to 0.25 mm/rev; depth of cut, ap, from 0.3 to 0.5 mm; and radial depth of cut, ae=1 mm. The application of the cutting fluid used in this experiment was a minimum quantity lubricant, which had the advantage of cooling effectiveness and low consumption of cutting fluid. The results showed that the feed rate, fz, was the primary factor controlling the tool life. The combination of Vc=115 m/min, fz=0.15 mm/tooth, as well as ap=0.5 mm and ae=0.15 mm gave the longest tool life that served 95.38 min in operation.
Item Type: | Article |
---|---|
Uncontrolled Keywords: | Ball nose end mill, Full factorial, Inconel 718, Minimum quantity lubrication |
Divisions: | Faculty of Manufacturing Engineering > Department of Manufacturing Process |
Depositing User: | En. Mohd Shahir Kasim |
Date Deposited: | 13 Dec 2013 08:33 |
Last Modified: | 23 Jun 2021 16:26 |
URI: | http://eprints.utem.edu.my/id/eprint/10371 |
Statistic Details: | View Download Statistic |
Actions (login required)
View Item |