Kasim, Mohd Shahir and Sulaiman, Mohd Amri and Mohamad, Effendi and Abu Bakar, Mohd Hadzley and Minhat, Mohamad (2014) Analysis of Tool Performance during Ball-end Milling of Aluminium Alloy 6061-T6. In: iDECON 2014 – International Conference on Design and Concurrent Engineering, 21 - 23 September 2014, Melaka.
![[img]](http://eprints.utem.edu.my/style/images/fileicons/application_msword.png) |
Microsoft Word (Analysis of Tool Performance during Ball-end Milling of Aluminium Alloy 6061-T6 )
anaysis_of_tool_performance_idecon2014_submission_117.docx - Accepted Version Restricted to Repository staff only until 1 April 2020. Download (925kB) | Request a copy |
Abstract
This article presents the tool wear mechanism when machining Aluminium alloy 6061-T6 with PVD coated carbide under dry cutting condition. Cutting parameters selected were cutting speed, Vc = 115-145 m/min; feed rate fz = 0.15-0.2 mm/tooth and depth of cut, ap = 0.5-0.75 mm. The result showed the tool life of PVD TiAlN ranged from 11 to 97 min. Full factorial approach was employed to exhibit relationship between parameter input and output. From the analysis, cutting speed is the most significant factor to tool performance followed by feed rate and depth of cut. Another conclusion is that the most of failure modes occurred were notch wear and flaking near those found near depth of cut line.
| Item Type: | Conference or Workshop Item (Paper) |
|---|---|
| Subjects: | T Technology > TS Manufactures T Technology > TJ Mechanical engineering and machinery |
| Divisions: | Faculty of Manufacturing Engineering > Department of Manufacturing Process |
| Depositing User: | Dr. Mohamad Minhat |
| Date Deposited: | 28 Nov 2014 11:31 |
| Last Modified: | 28 May 2015 04:34 |
| URI: | http://eprints.utem.edu.my/id/eprint/13799 |
| Statistic Details: | View Download Statistic |
Actions (login required)
 |
View Item |