Mechanical Properties And Cutting Performance Of Electroless Ternary Ni-W-P Coated Cutting Tools.

Md Ali, Mohd Amran and Abdul Aziz, Mohd Sanusi and Redzuwan, Bahrin Ikram and Muhammad Zaimi, Zainal Abidin and Raja Abdullah, Raja Izamshah and Kasim, Mohd Shahir and Mizobuchi, Akira and Ishida, Tohru (2017) Mechanical Properties And Cutting Performance Of Electroless Ternary Ni-W-P Coated Cutting Tools. Jurnal Teknologi , 79 (5-2). pp. 101-104. ISSN 2180-3722

Text 2017_Sanusi_MECHANICAL PROPERTIES AND CUTTING.pdf - Published Version Restricted to Registered users only Download (361kB)

Abstract

This paper presents a new approach of electroless nickel deposition (END) on cutting tools as to enhance tool performance. END involves several reactions in aqueous solution and is performed without using electrical power. The cutting performance of electroless ternary Ni-W-P alloy-coated cutting tools that were prepared in plating baths with different pH levels and with the addition of heat treatment was investigated. The cutting tool life was evaluated during machining on AISI D2 steel followed by measurement of surface roughness. Experimental results showed that END cutting tools produced from a plating bath with a pH of 8.5 with heat treatment resulted in the longest tool life, which was 7 minutes 32 seconds, and the lowest surface roughness, which was 0.412 μm. High deposition rate and high thickness of coating obtained under such pH condition were found to be the main factors in enhancing tool life. Furthermore, the addition of heat treatment increases the hardness and improves the coating surface.

Item Type:	Article
Uncontrolled Keywords:	Electroless nickel deposition (END), electroless ternary N-W-P alloy coating, heat treatment, tool life, surface roughness
Subjects:	T Technology > T Technology (General) T Technology > TK Electrical engineering. Electronics Nuclear engineering
Divisions:	Faculty of Manufacturing Engineering
Depositing User:	Nor Aini Md. Jali
Date Deposited:	15 May 2018 05:06
Last Modified:	09 Jul 2021 13:38
URI:	http://eprints.utem.edu.my/id/eprint/20874
Statistic Details:	View Download Statistic

Actions (login required)

View Item