Browse By Repository:

 
 
 
   

Items where Subject is "T Technology > T Technology (General)"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Authors | Item Type
Jump to: | | ' | A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z
Number of items at this level: 7674.

Allan, Soon Chan Roong (2015) Design And Implementation Of A Laboratory-scale Single Axis Sun Tracking System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chong, Ze Ming Bryan (2015) Design And Construction Of A small Scale Underwater Vehicle With Obstacle Avoidance System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd. Rizhuan , Othman (2007) Design For Die Casting (Spanner). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rauf , Abdul Kadir (2006) The Development Of Solar Energy Collector For Stirling Engine To Obtain An Optimum Produced Power. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aw, Aaron Teik Hong (2008) Design & Development Micromouse For Robot Competition. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Bernardette , Louisa Francis Ting (2008) Design And Development Of Accumulator For Domestic Water System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jamsari , Che Long (2008) The Development Of 3D Animation Story Title Guli Using Lip-Sync Techniques. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jurik Riguh, Ahras (2009) Design And Development Of Automated Sorting Recycle Bin. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Chee Yoong (2010) Optimization Of Machining Parameters In Turning Process Of Aluminum Alloy 6063. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Leong, Yong Lim (2015) Design And Development Of Sustainable Filament Extruder For 3D Printer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Azizul , Hamdan (2006) Alat Bantuan Pembelajaran Mikropengawal MCS51. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Shah , Abd Rahman (2007) Robotic Arm Spy Tanker. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Sofiuddin, Khidir (2007) CS8 Humanoid Robot (LEG 1). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Adam, Sepee (2008) Robot Automatik Menggunakan Motor Penginjak. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hanafiah, Nawi (2009) PC Based Controller For Home Automation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Mahathir , Mohd Daim (2007) Feasibility Study Of Product Localization: A Case Study. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nizar , Manshor (2009) Design Analysis Of A Press Machine For Disposable Pet Bottle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Salihin , Hj Abd Rahim (2007) The Study Of Eccentricity Of Circular Tube Under Quasi-Static Loading. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Isminhazwan , Ismail (2008) DC To DC Converter Using CMOS. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Muhammad Jamli, Mohd Ali (2008) Analysis Of Sawmill Workers Through Integration Of Video Observation And RULA Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nik Mohd Afiq, Nik Mohd Arif (2011) Analytical Study On Control Of Buckling Lobe Onset For Hollow Rectangular Tube Under Axial Impact. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Emafazreen, Mohd Yatim (2008) Design A Bipedal Walker Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Perly , Peh Thai Lee (2010) Intelligent Vacation Planner System Using Ant Colony Optimization. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rajandran , Morthui (2007) Intelligent Car Parking System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Raudhah , Zainal Rashid (2013) Thermal insulation particle board made with sugarcane bagasse fiber, kenaf core powder reinforced with polypropylene. Project Report. UTeM, Melaka. (Submitted)

Sani Irwan, Md Salim and Abdul Shukur, Jaafar and Azlishah, Othman (2010) The Design and Develop for Control Home Appliancse Via Internet (COHAVI). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Hajar , Abd Rahman (2008) A Study On Hardness Of Porcelain Body Sintered At Various Temperatures. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Shakiroh , Mohamad Ismail (2007) Designing An Interactive Telephone Based Remote Control And Alarm System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wong , Francis Ch'ng Kang (2007) Automatic Fish Feeder For Cultivation Pond. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yuvarajan , Karathihayan (2013) Modelling of palm fibre polypropylene composite for randomly distributed fibre reinforcement. Project Report. UTeM, Melaka. (Submitted)

Zaid Fikri, Md Salleh (2015) Design And Development Functional Prototyping Formula SAE Knuckle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

'

'Adilah, Mohd Arifin (2012) Digital Folklore Storybook For Android Apps: "Al-Kisah Puteri Santubong Dan Puteri Sejinjang". Project Report. UTeM, Melaka, Malaysia. (Submitted)

'Aishah, Hassan (2013) Fabrication Of Activated Carbon Filled Epoxidized Natural Rubber Composite Via Solvent Casting Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

A

A Azizi, Nurul Shafika (2016) Comparison Study On The Effect Of Double Pogo Pin And Single Pogo Pin In The IC Package Production. Project Report. UTeM, Melaka, Malaysia. (Submitted)

A Rahman, Roslina (2016) Optimization Of A Race Car Top Speed During An Event In Virtual Formula. Project Report. UTeM, Melaka, Malaysia. (Submitted)

A'zizi, Abdul Rahman (2016) Preparation And Characterization Of Paraffin-Poly (Ethylene Glycol) Composites As Form-Stable Phase Change Materials For Thermal Energy Storage Applications. Project Report. UTeM, Melaka, Malaysia. (Submitted)

A. Hamid, Mas Eliya (2016) Pet Feeder System Using Android Apps. Project Report. UTeM, Melaka, Malaysia. (Submitted)

A. Jalil, Hanisah Nadiah (2015) Design And Simulation Of In-Pipe Generator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

A. Kadir, Syahdan Amirul (2016) Friction And Wear Preventive Characteristic Of Biolubricant Derived From Waste Cooking Oil. Project Report. UTeM, Melaka, Malaysia. (Submitted)

A.B.M Shafiul, Azam and Ahmad Jamal, Salim and Abdul Hamid, Hamidon (2005) A Field Programmable Gate Array Based High Resolution Pulse Programmer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

A.Fadzil, Nur Fazreeha Ameelya (2017) The Optimization Of Cold Metal Transfer (CMT) Welding Process Parameters On 5052 Aluminium Alloy Tensile Strength Using Taguchi Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

AL-Hadhrami, Riadh Abdul Rahman (2017) Investigation Of Minimum Water Consumption At PCB Manufacturing Industry Using Water Pinch Methodology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ab Aziz, Muhammad Azraei (2017) Development Of IoT Smart Home Controller Using Biosensor. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ab Aziz, Nurfairuz Atiqah (2016) Microcontroller Based Communication Aid System For Disabled People. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ab Ghani, Muhamad Hilmie (2016) Automotive Aerodynamic Energy Harvesting From Front Bumper. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ab Halim, Nabilah (2017) Effects Of Boronizing On Sharp Cornered Metal Surface. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ab Latif, Norhazlia (2017) Conceptual Design And Fabrication A Novel Energy Harvester For Malacca River. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ab Malik , Ibrahim (2007) Persamaan Kinematik Dan Dinamik Untuk Robot Rhino. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ab Rahim, Muhammad Saiful Ridzwan (2016) Significant Effect Of Galvanneal Metal Sheet To The Quality Of Spot Welding. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ab Rahim, Muhammad Syakir (2017) An Experimental Investigation Of Performance And Gasseous Exhaust Emission Of A Diesel Engine Using Blends Of A Vegetable Oil. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ab Rahim, Siddiiq (2017) Investigation On Turbine Blade's Performance By Using 3-Dimensional CFD. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Ab Rahman, Fateihah (2017) Investigation Of Tribological Performance Of Waste Lubricating Oil. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ab Rahman, Mohd Khairul (2017) Development Of Grip Strength Monitoring System For Stroke Patient. Project Report. UTeM, Melaka. (Submitted)

Ab Rahman, Nur Aqilah (2016) Driving And Hindering Factors In Developing Pico-Hydro Generation System In Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ab Rahman, Nur Aqilah (2016) Driving And Hindering Factors In Developing Pico-Hydro Generation System In Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ab Rahman, Saeman (2009) Development Of Automated Satay Assembly Mechanism Using Gear Design Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ab Rashid, Mohd Zamzuri and Mohd Shah, Hairol Nizam and Sulaiman, Marizan and Ismail, Zool Hilmi (2017) A New Controller Approach Using Mixed Linear Quadratic Gaussian (LQG) / H-Infinity To Improve Trajectory Tracking Of Nonholonomic Non Wheel System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ab Razab, Huzaimah (2017) A Study On Tensile Properties Of Acrylnitrile Butadiene Styrene (ABS) Subjected To Thermal Degradation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ab Razak, Muhammad Nur Asyraf (2016) Effect Of Oil Palm Trunk (OPT) And Oil Palm Frond (OPF) Fiber To Physical And Mechanical Properties Of Polyurethane (PU). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ab Razak, Nur Hasinah (2016) Numerical Investigation On Different Penetration Angle In Bone Drilling. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ab. Aziz, Nur Adlina (2016) Design Of Single Phase H-Bridge Multilevel Inverter By Using Microcontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ab. Hakim, Ab. Halim (2009) Kajian Tentang “Menambahbaikan Sistem Brek Letak Kereta Elektrik Untuk Kereta Penumpang”. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ab. Razak, Muhammad Amirul Asyhraf (2017) Development Of Solar Based Water Circulation Machine For UTeM Lake. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ab.Rahman, Ahmad Wahi (2018) Effect Of Node Enhancement On Strength Of Body-Centered-Cubic (BCC) Polymer Lattice-Structure Material. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abadi, Mesiran (2012) Investigation Of Soil Resistivity Base On Design Of An Experiment Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abang Let, Abang Mohd Elna Fiqri (2017) Facial Characteristic Of Product Preferences Based On Phi Approach Towards Aesthetics. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abbdul Faiz, Anuar (2013) Effect Of Injection Machine Parameters On The Warpage Of Dumbbell Injection Mould. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Aziz, Kadir (2006) Structural Design And Analysis Of Sewerage Inspection Crawler. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Aziz, Azrul Muhaimin (2017) Generating Electricity From Tyre Rotation System Using Statistical Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Aziz, Ihsan Fikri (2017) Development Of Automatic Healthcare System By Using GSM For Paralysis Patient. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Aziz, Muhammad Fahmi (2018) Mechanical Properties Of Coconut Fibre Reinforced Composites. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Aziz, Muhammad Syahril (2017) Development Of Small Portable Air Conditioner By Peltier Module. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Aziz, Norfarhana (2016) Effects Of MWCNTS Surface Modification On The Thermal And Mechanical Properties Of Epoxy Filled MWCNTS Nanocomposites. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Aziz, Syazxerlin (2017) Line Balancing Using Lean Manufacturing Tools At Balloon Packaging Department. Project Report. UTeM, Melaka. (Submitted)

Abd Ghafar, Abdullah Ariff (2017) Development Of Portable Lifter To Lift Outdoor Unit For Split Type Air-Conditioning. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Ghaffri, Abd Halim (2008) Permodelan Dan Analisis Pelanggaran Kereta. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Hadi , Abd Malik (2007) Control Of An Inverted Pendulum Comparison Between PID Controller And SFC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Hamid, Mohd Sofian (2017) The Effect Of Slat And Flap To The Aerodynamics Performance Of An Airfoil. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Hamid, Muhammad Haziq (2017) Experimental Investigation On The Effect Of Fuel Temperature On The Performance Of Spark Ignition Engine With Hydrogen Peroxide-Gasoline Blend. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Harith, Abd Halim (2015) Gas Detector For Safety Home Using GSM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Jakfar, Nur Syiefa (2017) Study On Sandwich Structure Using Banana Pseudo-Stem Frp As Skin Material For Environment Sustainability. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Karim , Ummi Ramizah (2016) A 2.45 GHz Wearable Antenna Using Conductive Graphene. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Lah, Akmal (2015) Establishment Of New Standard Time For The Manufacturing Of Hot-Dip Galvanized Steel Of Tenaga Nasional Berhad (TNB) Concrete Pole Accessories. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Latif, Muhammad Fadzilan (2017) The Development Of Portable In-Situ Open Circuit Potential Test Cell. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Majid, Noor Akmal (2016) Development Of High Tech Electricity System In Agriculture Field. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Majid, Nur Izzati (2017) A Study On Bending Properties Of Acrylonitrile Butadiene Styrene (ABS) Subjected To Thermal Degradation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Majid , Darsano and Prof Madya Abdul Rani, Othman and Redzuan, Abdul Manap (2008) Design Fabricate And Measurement Of Linear Power Amplifier For Communication Applications. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Majid , Bachuk (2009) Mini Solid State Tesla Coil. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Manaf, Rumaisa (2016) Case Study Effect Of Temperature On The Nanoparticle Stability Properties. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Manap, Nurulfajar and Sulaiman, Riza and Darsono, Abd Majid and Mat Ibrahim, Masrullizam and Hairol , Izzuddin (2017) Enhanced Image View Synthesis Using Disparity Depth Extraction For Efficient Performance In Stereo Vision Applications. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Mudtalib, Nur Elina Shahrina Amza (2017) Synthesis Of Graphene Nanoplatelets Using Chemical Vapour Deposition And Waste Cooking Oil As Carbon Feedstock. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Muin, Najihah (2017) Influence Of The Work Hardening On Springback Of The U-Bend 316L Stainless Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Rafar, Mohd Din Arshad (2008) Design Validation And Development Of A 6 Axis Robot Components. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Rahim, Abdul Fattah (2016) Development Of Linear Positioning Table For Drilling Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Rahim, Abdul Fattah and Mohd Saleh, Afferry and Sidek, Siti Nurfarhana and A. Bakar, Munirah and Wan Ismail, Wan Syarma Adila (2017) Advanced Machining (BETP 3584) Project Arm Link Aerostructural Component. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Rahim, Mohammad Safwan (2017) Design And Fabrication Of An In House Automotive Wheel Rim Testing Equipment. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Rahim, Muhammad Mustaqim (2017) Development Of IoT Wheelchair For Rehabilitation. Project Report. UTeM, Melaka. (Submitted)

Abd Rahim, Rosman and Kok, Swee Leong and Lau, Kok Tee and A Aziz, Khairul Azha and Mustaffa , Izadora (2017) Model And Experimental Verification Of Hydrodynamic Coupling Piezoelectric Cantilever In Different Viscoelastic Environments. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Rahim , Muhamad Akliff (2016) Design And Development Of Microstrip Array Antenna At 28 Ghz. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Rahman, Rahim (2009) Design Optimization Using Finite Element Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Rahman, Mohd Shamsul Izhar (2017) Design And Analysis Of The Suspension System For The Agricultural Smart Mover With Using Total Design Method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Rahman, Muhammad Aizuddin (2016) Development Of Water Floating Nano Turbine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Rahman, Muhammad Khorruddin (2017) Smart Street Lighthing On Highway. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Rahman, Nadia Adriena (2016) Effect Of Injection Moulding Parameters On Material Characteristic Of Two Plate Mould With Different Material Using Flow Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Rahman, Najiah Atira (2018) Barriers And Motivation Of The Solid Waste Management Among Manufacturing Companies In Malaysia. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Rahman, Najwa (2017) Development Of Surveillance System Using Raspberry Pi. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Rama, Nur Syafiqah (2017) Development Of A Smart Baby Stroller Using Bluetooth. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Rashid, Abd Rahim (2015) Pemanas Air Solar Kos Rendah Untuk Kegunaan Domestik. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Rashid, Abdul Aliff Rahim (2016) Kajian Ultra Kapasitor Ke Atas Motor Elektrik. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Rashid, Nur Umiza (2016) Nano Hybrid Of MWCNTs GNPs Filled Epoxy Nanocomposites For Structural Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Rasid, Jaafar (2009) Study And Analysis The Effectiveness CAD-CAM System In Mold Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Razak, Abd Halem (2011) Comparison Of Sand Casting Surface Roughness And Dimension Accuracy Between Aluminium Silicon Carbide And Tin Silicon Carbide. Project Report. UTeM, Melaka. (Submitted)

Abd Razak, Muhammad Hafiz (2009) Design Of The Robust Gripper Control For Hoisting Mechanism. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Razak, Ammar Fikri (2018) Design And Development Of Rotary Jigs. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Razak, Mohamad Izreen (2017) Application Of Converted Mode For Defect Defection In Plate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Razak, Muhammad Izzul Afandi (2016) Development Of Solar Powered Water Sensor To Monitor Water Quality For Fish Farm. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Razak, Safiah (2017) Bandwidth And Gain Enhanced Of Patch Antenna With Metamaterial Waveguide. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Salam, Adam (2009) Mereka Bentuk Platfom Keselamatan Untuk Kerja-Kerja Membuka Dan Menutup Kanvas Lori. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Salleh, Mohamad Syazuan (2017) Study Of Cabin Temperature Of The Car Parked Under Various Condition. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Samat, Muhammad Nizam (2015) Investigation Of Nozzle Height Of Abrasive Water Jet Machining On Mild Steel Gear Surface Cutting Parallelism. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Sukor, Abdul Aziem (2015) Design Of Grease Trap For Wastewater Management System Using Pugh Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Sukor, Siti Marsyidah (2016) The Comparison Study Of Handgrip Pressure On Steering Wheel National Cars (PROTON & PERODUA). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Wahid, Syakira (2017) Development Of Car Temperature Cooling Control By Using Magnet Code. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Yazid, Nurul Shuhadah (2016) Effect Of Poly Vinyl Alcohol (PVA) On The Size Of Linseed Oil (LO) Microcapsule Self-Healing Coating. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Zamhuri, Mohammad Huzer (2016) Rekabentuk Dan Simulasi Turbin Angin Paksi Menegak Pada Kelajuan Angin Rendah. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd. Bashir, Aimaduddin Azfar (2018) Design Optimization Of External Coolant Filter For Metal Machining Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd. Halim, Zakaria (2011) Automatic Room Temperature Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd. Kadir, Mohammad Sallehudin (2017) Development Of HVAC Damper Temperature Controller Using Arduino. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd. Samad, Hasan Basari and Zuraida , Abal Abas and Nanna Suryana, Herman (2009) Development Of Prototype Tool For Heat Transfer Model. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdillah, Azfar Solihin (2017) Mereka Bentuk Dan Fabrikasi Mesin Pemprosesan Bagi Penghasilan Biodiesel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul 'Alim, Abdullah (2009) Remote Sensing Walker. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Afiq Arifin, Khairuddin (2014) Developing Mesh Network To Extend Wifi Coverage Area. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Afri, Mohd Nor Zamani (2016) Application Of Fiber Optic Sensor For Sodium Hypochlorite Concentration Detection. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Alif, Abdul Aziz (2011) A Feasibility Study Of 3D Printer Parameters Optimization By Using Bamboo Powders. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Azim, Roslan (2010) An Application Of 3D Modelling And Simulation Analysis In The Development Of Consumer Product Design (Folding Bicyle). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Azim, Abdul Rahim (2008) WCDMA Simulation For Transmitter Part And BER Performance In AWGN, Rayleigh Channel And Rician. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Azim, Mat Salleh (2009) Surface And Sub Surface Analysis When Hard Turning Of AISI D2 Tool Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Aziz, Rozi (2010) Analysis And Measurement Of Optical Fiber Channel Doubler (OFCD). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Aziz, Mohamad Azim (2017) Fabrication Of Electronic Fuel Injector Tester For Education Purpose. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Aziz, Mohd Azrin (2009) Energy Efficiency Enhancement At FKE Administration Block. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Aziz, Nur Farah Azwani (2018) Material Selection For Natural Fibre Composite Automotive Component. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Aziz, Nur Hafizah (2016) Investigate The Viscosity Of Used Engine Oil Before And After Filtration And Enhance By Nanoparticles. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Aziz, Nur Liana (2017) Optimization Of Tribological Performance For Purify Engine-Oil Enhance By Nanoparticles. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Aziz, Nur Syafiqah (2017) Design And Development Of Fly-Mosquito Trapping Device. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Aziz, Nurul Saqinah (2017) Development Of Emergency Pack For Camper By Using Arduino. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Aziz, Qayyum Edlee (2016) Propose An Optimum Periodic Supervision On Conventional Shearing Machine At Power Booster Engineering & Maintenance Sdn Bhd Using Reliability Methodology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Basit , Kamaludin (2013) Pembentukan mendapan bahan bakar diesel dan bio-diesel pada suhu permukaan melebihi suhu Kadar Pengewapan Maksimum (MEP). Project Report. UTeM, Melaka. (Submitted)

Abdul Faiz , Abdul Rohim (2009) Develop The SCADA System For Automatic Fish Feeder. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Fattah , Mohd Tahir (2008) Effect Of Air Arrangement On Wood Combustion Through CFD. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Gaffar, Muhammad Sayyid (2017) Investigation Of Load Bearing Capacity On Different Bio-Lubricant Enhance By Nanoparticles Using Extreme Pressure Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Gani, Ahmad Shafiq (2016) Designing Air Filtration Test Rig (Prototype) In Evaluate Efficiency Of HVAC Filter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Garapar, Abdul Rahiman (2017) Study Of Glass Tint Effectiveness As Heat Resistant In Buildings. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Ghaffur , Mohammad Mohsin (2009) Soft Switching Inverter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Ghani, Mohamad Nur Zahir (2016) Development Of Smart Monitoring Parking System Using Arduino. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Ghapar, Muhammad Faez (2017) Characterization Of A Wideband Nonlinear Vibration Absorber Using Curved Constrained Cantilever Beam. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Hadi, Nur Aisyah (2016) Redesign Material Handling System By Using Ergonomic Approach To Reduce Back Pain Risk. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Hafiz, Abd. Halin (2012) Performance Analysis Of Zigbee-Based Wireless Viral Advertisement System For Land Public Transport. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Hafiz, Mohd Tamezer (2012) Optical Soliton In Long Haul Telecommunications With Fiber Loss Factor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Hafiz, Ab Aziz (2009) Vehicle Handling Improving By Active Steering. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Hafiz, Abd Hamid (2010) Air Conditioning System Powered By Small Engine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Hafiz , Hashim (2013) To determine alkaline catalyst for the jatropha oil biodiesel production. Project Report. UTeM, Melaka. (Submitted)

Abdul Hafiz , Abdul Hamid (2007) Osciloskop Digital Berasaskan Komputer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Hafiz , Mamat (2009) Ultrasonic Range Finder. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Haji, Mohd Faiz (2008) Design And Development Of Shimless Pump Footing System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Hakam, Mohd Ridza (2010) Effect Of Particle Size And Fuel Type On Solid Waste Combustion. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Hakim, Masod (2009) Mobile Campus Alert Notification System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Hakim, Rohhaizan (2009) Investigation Of Pressure And Temperature Cause By From Turbo System In Vehicles. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Hakim, Harun (2009) Design Of Automatic Cage System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Halim, Abdul Jamal (2012) Rekabentuk Dan Fabrikasi Struktur Dadan Mobiliti Pengangkutan Peribadi. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Halim, Mohd Mustaffa (2012) Stability Control For Quadcopter With An Autonomous Flight System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Halim, Abdul Qayyum (2016) Water Bill System Technology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Halim, Anisyahida (2016) Development A New Gear Oil Sensor Using Fiber Optic Sensor For Engine Functional Purpose. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Halim, Hafrizah Ashidah (2009) Transmitter And Receiver For Intelligent Speed Limiter System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Halim, Mustafa (2012) Smart Automatic Dual Function Lawn Mower With Infrared And Metal Sensor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Halim, Nor Faizah (2017) The Optimization Of Friction Stir Welding Parameter For Aluminium 5052 By Using Full Factorial Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Halim , Mustafa (2007) Investigation Of Microstrip Parallel Couple Wideband Filter (WCDMA Application). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Hameed, Mohamed Aslam (2016) Optimisation Of Tyre Pressure And Fuel Type Towards Fuel Efficiency Using Design Of Experiment Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Hamid, Abdul Wafi (2017) Effects Of Solvent On TiO2 Sol-Gel Thin Films. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Hamid, Hafieza (2016) Solar Powered Fish Feeder. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Hamid, Hamidon and Guan, Soo Yew and Norizan , Mohamad and Sani Irwan, Md Salim and Zahariah, Abdul Manap (2005) Industrial Application Of PIC Microcontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Hamid, Hartini (2008) Design Of 240V Square Wave Inverter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Hamid, Mohamad Hazrik (2015) Insulation Monitoring Device. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Hamid, Nursheda (2016) The Human Analysis And Ergonomics For The Driver Seat Design Of A Tractor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Hamid , Hamidon and Siti Huzaimah , Husin and Yusmarnita , Yusop and Siva Kumar , Subramaniam (2011) Real-Time Public Transportation Monitoring System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Hamid , Mohd Syaiful Rizal and Chew, Boon Cheong and A.Perumal, Puvanasvaran and Mohd Noor , Khairul Baharein and Shamsuddin, Alina and Hanafi , Zulkifli and Mohd Idris, Mohd Fadzil and Choong, Chien Khay (2018) Preventing Technological Disaster Through Risk Assessment Protocol (RAP) Development For Malaysia High Tech-High Risk Industry. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Hamid., Samsiah (2016) Optimizing Traffic Light System For Emergency Vehicle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Hasif, Abdul Halim (2010) A Study On Short Term Load Forecasting Using Back Propagation Neural Network. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Hayyan, Abdul Halim (2010) The Study Of E6013 Electrode Effect On Microstructure Of Difference Mild Steel Thickness By Using Arc Welding. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Helmyruddin, Ab Rahman (2005) Conceptual Designing 20 MW Diesel Engine Power Plant For A Remote Area. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Jabbar, Aseran (2012) UTeM MPP Voting System Using SMS. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Jabbar , Zamri (2013) Smart day and night lighting system using solar light ray reflection and deflection. Project Report. UTeM, Melaka. (Submitted)

Abdul Jalil, Muhammad Hafizzul Saffuwan (2017) Design And Development Of A Checking Fixture For An Automotive Press Part. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Kadir, Aida Fazliana (2017) A New Algorithms Of Time-Frequency Analysis Technique For 3-Phase Voltage Source Inverter Faults Detection System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Kadir, Mira Asyikin (2016) Welding Patterns Influence On The Joining Strength Of Mild Steel Plate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Kadir, Muhamad Fitri (2018) Development Of Value Stream Mapping For Palm Oil Company - A Case Study. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Kadir, Nor Asyraf (2016) Tribological Studies Of Bio-Lubricants On Plastics. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Kapor, Muhammad Farhan (2016) Blade Parameters Analysis On The Performance Of Wind Turbine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Karim, Shamihah (2011) Simultaneous Decision Of Car's Battery Using Analytical Hierarchy Process At The Conceptual Design Stage. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Karim, Kasrul and Bugis, Ismadi and Abdullah, Abdul Rahim and Mohd Jamil, Mohd Luqman and Jidin , Auzani and Ahmad Tarusan, Siti Azura (2017) Independant Control Scheme For Sub-Bearing Permanent Magnet AC Motor Drive. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Khalid, Husni Azmal (2016) Design And Analysis Of Electric Bicycle For Disable Person. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Latef, Muhammad Syazwan (2017) Design Of Water Filter System Containing Rice Husk And Kapok Fiber For River Trash Collector System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Latif, Shahida (2016) A Design And Development Of Rain-Sensing Auto Window Closure For Home. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Latiff, Luqman Rashidi (2018) Design Circular Polarized Antenna With Multilayer Metasurface. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Latiff, Muhammad (2016) Renewable Energy Technology : AIRco Wind Turbine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Majid, Burhanuddin (2015) Design A New Bionic Arm To Assists Paralyze Arm. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Majid , Ali (2008) Autonomous Maintenance Programme For Milling Machine. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Abdul Malik, Abdul Hafeez (2015) Basic Design And Performance Analysis Of Micro-Hybrid Generator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Malik, Yusuf (2010) Design And Development Of Autonomous Robot Using Digital Fiber Optic Sensor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Manah, Syed Ahmad (2017) The Development Of Noise Analyzer System And Data Reliability Using Arduino. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Manan, Khairul Adlan (2009) Multiple Output Chargers For Portable Appliance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Manap, Muhamad Naim Fahmi (2017) Investigation Of Tool Wear And Surface Roughness When Machining AISI 1045 With CIP Pressed Ceramic Cutting Tool. Technical Report. UTeM, Melaka. (Submitted)

Abdul Mu'in, Haz'zaid (2012) Modelling And Study Of Femur Bone Under Normal loading. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Mu'iz, Abdul Hamid (2015) Anthropometric Characteristics Of Technology Campus Students And Their Relationship With Existing Bus Stop Bench. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Muhaimin, Abdul Latiff (2015) High Power Inverter In Ambulance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Muhaimin , Mohd Shafie (2013) Wasted Heat Recovery System : How To Gain Energy. Project Report. UTeM, Melaka. (Submitted)

Abdul Munaf, Raziyah Maznah (2016) Reactive Power Planning Using Evolutionary Programming For IEEE 26-Bus. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Munaf, Raziyah Maznah (2016) Reactive Power Planning Using Evolutionary Programming For IEEE 26-Bus. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Munajat, Nurain (2016) Cleaner Production Implementation In Palm Oil Mill. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Munir, Muhammad Syafiq (2017) Thermal Stress Analysis On Disc Brake Rotor For NGV Vehicle By Using Finite Element Analysis (ANSYS). Project Report. UTeM, Melaka,Malaysia. (Submitted)

Abdul Mutalib , Abdul Hamed (2008) Modeling And Experimental Identification Of Magnetic Clutch. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Abdul Paizal, Mohd Zain (2015) Analysis Of Preventive Maintenance For Processing Plant (Gassification Process Unit). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rafeq, Saleman and Musthafah, Mohd Tahir and Mohd Azman, Abdullah and Mohd Juzaila, Abd. Latif and Muhammad Zahir, Hassan and Syahibudil lkhwan, Abdul Kudus and Muhd Ridzuan, Mansor and Fudhail, Abd Munir (2012) Design And Fabrication Of A Race Car Vehicle For UTeM Formula Varsity 2012. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Raheem, Abdul Mueezz (2018) The Effect Of Carbon Nanotube Aspect Ratio On The Functional Properties Of Electrically Conductive Adhesives. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rahim, Abdullah and Fara Ashikin, Ali and Fazdli, Patkar and Mohd Luqman, Mohd Jamil (2011) Design Of Simulation Packages For Parameters Estimation Of AC Motor Drives And Load. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rahim, Samsudin and Sivarao, Subramaniam (2007) Investigation Of Laser Performance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rahim, Jaafar (2015) Study Of Selected Properties Of Low Density Alloy After The Heat Treatment Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rahim, Mohd Aliff Mukmin (2018) Productivity Improvement Through TPM Adoption On Printing Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rahim, Mohd Huzaif (2016) A Study On The Potential Of Peltier In Generating Electricity Using Natural Resources. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rahim, Muhammad Atikkullah (2017) Design And Development Wind Turbine Generator By Using Arduino. Project Report. UTeM, Melaka. (Submitted)

Abdul Rahim, Muhammad Rafiq (2017) Design And Development Of Vision Guided Height Adjustable Conveyor Platform On Automated Guided Vehicle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rahim, Samsudin and Sivarao, Subramonian and Gannapathy, Vigneswara Rao and Wahyono Sapto, Widodo and Safiza Suhana, Kamal Baharin (2013) E-Preventive Maintenance Warning System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rahim, Suhaiza (2016) The Development Of Online Monitoring System Prototype For Tigris Conservation Center. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Rahim, Suhaiza (2016) The Development Of Online Monitoring System Prototype For Tigris Conservation Center. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Rahim , Samsudin and Sivarao, Subramoniam (2007) Experimental Investigation Of Burr Formation In Drilling. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rahman, Abdul Ghani (2012) Comparison On Data Driven Algorithms To Maintain Color Constancy In Industrial Camera For High Intensity Environment. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rahman, Ahmad (2013) Design And Analyse The Configuration Of Earthing System Based On High-Low And Low-High Soil Structure. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rahman, Mej Mohd Yazi (2016) FPGA Implementation Of AES Algorithm. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rahman, Muhammad Syahir Afif (2017) Harmonic Minimization Of A Single Phase Cascaded H-Bridge Multilevel Inverter. Technical Report. UTeM, Melaka. (Submitted)

Abdul Rahman, Muhammad Syahir Afif (2017) Harmonic Minimization Of A Single Phase Cascaded H-Bridge Multilevel Inverter. Technical Report. UTeM, Melaka. (Submitted)

Abdul Rahman, Nabil Haikal (2017) Development And Optimization Of Portable Vacuum Clamping. Project Report. UTeM, Melaka. (Submitted)

Abdul Rahman, Noor Farahana (2017) Applications Of Open-Source CAE Tools In Mechanical Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rahman, Nor Nabilah Syazana (2016) Automatic Computer Vision System For Industrial Product Quality Inspection. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rahman, Nurul Amirah (2017) Surface Finish Improvement Using Retraction Method For Fused Deposition Modeling. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rahman, Sarni Nur Atikah (2015) Development Of Heating, Ventilating And Air Conditioning (HVAC) Control Monitoring System (CMS) Using Arduino Microcontroller In Poultry House Model. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rahman , Abdul Malek (2008) Design And Development Of Sofa Bed. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rahman , Mat Rejab (2010) Develop Heating System Using By Visual Basic. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rahman Hanif, Bahar (2009) Investigation On Withstand Voltage Of Silicone Rubber In Various Condition. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rani, Othman and Chairulsyah, Abdul Wasli (2010) 5.8 GHz Low Noise Amplifier for Front End Receiver. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rani, Othman and Mohd Nor, Husain and Mohammad Syahrir, Johal (2011) Design of Low Noise Amplifier Using Cascode And Cascaded Techniques WiMAX IEEE 802.16 Standards. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rani, Mohamad Hakim (2017) Development Of GPRS Signal Amplifier. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rani, Muhammad Haris (2016) Development Of Flexible Clamping For Drilling Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rani, Othman and Chairulshah, Wasli (2006) Development Of A 2.4GHz Antenna Arrays Using Microstrip Technologies. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rani , Othman and Chairulsyah, Wasli (2006) Development Of A 2.4GHz Antenna Arrays Using Microstrip Technologies. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rani , Othman and Chairulsyah, Wasli (2005) Development Of A 2.4GHz Band Pass Filter Using Microstrip Technologies. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rashid, Abdul Jalil (2012) Merekabentuk Dan Menganalisis Kipas Penghembus Kenderaan Penumpang. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rashid, Abdul Azim (2016) Incorporating Flywheel Hybrid Module In Motorcycle : A Conceptual Design Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rashid, Ahmad Hafizzuhdi (2016) Design An Automated Guided Vehicle (AGV) Point To Point Motion Control. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rashid, Muhammad Faiz Haiqal (2016) Optimization Study On Process Condition Of Durian Shell Pulping Towards Hydrophobicity. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Razak, Ahmad Tarmizi (2009) Kajian Terhadap Kekuatan Rekabentuk Tangki Gas Petroleum Cecair (LPG). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Razak, Abdul Rahman (2010) Mobile Robot Multiple Sensor Behaviour For Obstacle Avoidance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Razak, Eza Shaheda (2016) The Study Of Measurement Error In Vision System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Razak, Hanim and Salehuddin, Fauziyah and Shaari, Sahbudin and Haroon, Hazura and Mohd Zain, Anis Suhaila and Md Shah, Wahidah (2017) Enhanced Mach Zehnder Interferometer (MZI) Optical Modulator On Silicon-On-Insulator (SOI) Using Tapered Structure For Improved Performance In Wavelength Division Multiplexing (WDM). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Razak, Muhammad Aniq (2016) Development Of Remote Monitoring Room Using Arduino. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Razak, Muhammad Asyraf (2016) Leftover Rice Starch From Food Waste To Bio-Based Plastic. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Razak, Muhammad Ridhwan (2016) Influence Of Aluminium And Copper On Thermal Ageing Of Synthetic Ester Oil (MIDEL 7131). Project Report. UTeM, Melaka,Malaysia. (Submitted)

Abdul Razak, Nur Amiera Ashraf (2017) Analysis Performance Of Fiber Optic Sensors In Fully Synthetic Engine Oil Monitoring System With Different Concentration. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Razak, Nur Awanis (2017) Controller Design For Nonlinear Motorized Prosthetic Hand System. Project Report. UTeM, Melaka. (Submitted)

Abdul Razak, Nurul Ameera (2017) Development Of Fiber Optic Sensor For Semi-Synthetic Engine Oil Performances With Different Concentrations. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Razak , Shaari (2007) Roboclimb. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Razak , Bahtrem (2007) Proses Fabrikasi Dan Pencirian Bahan Komposit Laminat Untuk Industri Kapal Terbang. Project Report. UTeM, Melaka. (Submitted)

Abdul Razali, Nurul Wahida (2014) Enhancing Quality Management System Through Continuous Quality Improvement Practices In Malaysian Manufacturing Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Razi, Muhammad Haidhir Firdaus (2017) A Development Of Motorcycle Engine Oil Performance Monitoring System Using Fiber Optic Cable. Project Report. UTeM, Melaka. (Submitted)

Abdul Razi, Muhammad Helmi Farid (2015) Study Of Resistance Spot Welding For Automotive Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rizal, Jokariah (2009) Design And Development Of EGGS Grading And Storing Systems. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rob, Muhammad Faiz (2016) A Study On Machining Strategies For Thin-Walled Five-Axis Pocketing Profile : Aero-Structural Parts. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Samat, Abdul Hafiz (2017) Select And Install Engine For Agricultural Smart Mover. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Syukor, Mohd Jaya and Yogan, Kumar and Ruzaidi, Zamri (2009) Optimization of Hard Turning Machining Parameters Using Swarm Intelligence Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Talib, Din and Mustafar, Kadir and Roslina Aida , Rahimi and Fauzi, Khamis (2013) The Study on the Characteristics and Limitations of Pneumatic Lift for the Building of 4 Storey and Below, for the Development of a Low Cost and Safe Pneumatic Personal Lift. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Talib, Din and Mohd Yazid, Othman and Mohd Yuhazri, Yaakob (2012) The Design And Development Of Water Wheel For Power Generation At UTeM's Main Campus Recreational Lake. Project Report. UTeM. (Submitted)

Abdul Talib , Din and Shamsul Anuar, Shamsuddin and Mohd Yusoff , Sulaiman and Dora, Ursee (2007) The Design Of A Cost-Saving Air Conditioning System Using Earth Cooled Dehumidification Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Wahab, Muhamad Hafiz (2016) Automation Deflashing System For Blow Moulded Product. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Wahab, Muhamad Syafiq (2017) The Model Of Deforming Mode Tube Under Axial Loading. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Wahab, Nurfarahin (2018) The Study Of MRT Commuter's Satisfaction Of MRT Services At Sungai Buloh-Kajang Line. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Wahid, Nadia Mazwa (2017) Effect Of Repair Welding On Pipes With Dissimilar Materials. Technical Report. UTeM, Melaka. (Submitted)

Abdul Zali, Muhammad Ridzuan (2017) Investigation Of Energy And Cost Effectiveness Between Electric Water Heater And Energy Harvested From 1.0 HP Air Conditioner. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdulghani Mohammed, Saeed Mohammed (2017) Comparison Of Linear And Intelligent Control For A Nonlinear Electro-Hydraulic Actuator Systems. Project Report. UTeM, Melaka. (Submitted)

Abdulhadi Hasan, AlJoumah (2016) Design And Development Of Planar Antenna For GSM Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdull Hanif , Abdull Rahman (2013) Microstructural Study On Different Type Of Biodiesel Fuel For Automotive. Project Report. UTeM, Melaka. (Submitted)

Abdullah, Muhammad Radzie (2012) Mengkaji Daya Seretan (Drag Force) Terhadap Rak Bumbung (Roof Box) Kereta Bersaiz Kompak Dengan Menggunakan Kaedah Eksperimen (Terowong Angin). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdullah, Asma Nor Hidayah (2016) Systematic Development Of Injection Mold : A Convocation Souvenir. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdullah, Fatin Nadia (2017) Experimental Investigation On Mechanical Properties Effect For Different Orientation Of Kenaf Fiber Composite Through Tensile And Impact Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdullah, Mohammad Amirul (2016) Product Development Of Smart Soap Making Machine For Home Appliances. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdullah, Mohd Fairuz (2017) Fabrication Of Emergency Tyre Inflator Generated From Motorcycle Exhaust Gas. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdullah, Muhammad Erwan Shah (2016) Temperatured-Controlled Device For Medical Application Using Peltier Effect. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdullah, Muhammad Hafiz (2016) Study Of Fluid Flow In Junction Of Car Washer Tube Using CFD Simulation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdullah, Muhammad Sharifuddin (2017) The Effect Of Thermal Processing On The Properties Of Reclaimed Carbon Fibre. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdullah, Nur Suhaida (2016) Experimental Investigation On Coconut Fibre Composition Profiling With Respect To The Modulus Of Rigidity. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdullah, Nurfarahizzah (2016) Design And Analysis Safest Encryption Television Signal Distribution. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdullah, Nurul Atika Afifa (2016) Monitoring Energy Meter System By IoT. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdullah, Nurul Fatehah (2018) Influence Of Swelling Media And Soaking Parameter To The Physical Properties Of Natural Rubber/EPDM Nanocomposites. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdullah, Nurul Saadah (2016) Potential Study : Development Of Rainfall's Gravitational Force Based On Power Generation For Urban Area In Malacca. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdullah Firdaos, Mohd Lidin (2008) Natural Gas Vehicle (NGV) Engine Performance Testing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdullah Helmee, Suki (2008) Inexpensive PLC Input Port Expansion Using Microcontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdullah Kamil, Puteri Eliani Fikri (2017) Layout Analysis And Improvement In A Manufacturing Industry - A Case Study. Technical Report. UTeM, Melaka. (Submitted)

Abdullah Muttaqin, Adam Shukri (2007) Merekabentuk Struktur Dan Mekanisma Untuk Pemasangan Jig Pencengkam Pada Mesin Ujian Tegangan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdullah Sani, Nor Azfar (2016) Design And Development Of Vehicle Security Device By Using Biometric Identification (Fingerprint). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdullah Sani, Nor Syaima' (2014) 5S Implementation In Malaysian Manufacturing Industry : What's New? Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abidin, Roziah (2008) Investigation Of Inter Material Shear Properties Of Iron And Stannum. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abidin, Siti Nuratiqah Aliana (2017) Development Of Plant Moisture Monitoring System Using Arduino. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abu , M. Wahidullah and Marizan, Sulaiman and Mohammed, Irfan (2005) Preliminary Building Automation System For Energy Auditing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abu Bakar, Ahmad (2011) Analysis The Future Application Of Renewable Energy On Vehicle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abu Bakar, Muhamad Najmi (2012) A Study On TNB Load Reading Prediction. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abu Bakar, Hafizul Aliff (2017) DC Motor Speed Control Using Measured Distance By Ultrasonic Sensor. Project Report. UTeM, Melaka. (Submitted)

Abu Bakar, Mohamaad Syafiq (2016) Automation Deflasher Mechanism For Blow Moulded Product. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abu Bakar, Mohd Fairuznizam (2017) Flat Plastic Part Optimization In Injection Moulding Of Pure Polypropylene And Polypropylene With Talc Using Taguchi Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abu Bakar, Mohd Nazrin Nashriq (2016) Analysis Air Pressure Inside Ducting System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abu Bakar, Muhamad Hairee Izwan (2018) Analysis And Validation Of Workstation Design For Mechanical Assembly Department In Aero-Composite Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abu Bakar, Muhammad Azad (2017) Conversion Of Go-Kart To E-Kart Mounting Design And Fabrication. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abu Bakar, Noor Farah Iddayu (2016) Formation Of Iron Oxide Nanostructure By Thermal Oxidation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abu Bakar, Norisfarina (2018) Study On Waste Glass Milling For Feldspar Replacement In Ceramic Tile. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abu Bakar, Nur Shakira Suhana (2018) Energy Harvesting From Mechanical Vibration Of Automotive Component. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abu Bakar, Sabariah (2016) Effect Of Polycation Additive On Electrophoretic Deposition Of Surface Functionalized Boron Nitride Particles. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abu Bakar, Siti Amira (2016) Occupational Safety And Health Management : Potential Risk Of Electrical Hazard At Construction Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abu Firaz, Shamshul Kamal (2012) Simple Mobile Ordering System For Restaurant Within Wi-Fi Network. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abu Hanifah, Hariz (2017) Introduction Of Double Gyroscope Concept For Motorcycle. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abu Hanipah, Siti Aishah (2016) Energy Pricing Optimization By Using Neural Network (NN) For Demand Site Tariff Strategy Peninsular Malaysia Case Study. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abu Hanipah, Siti Aishah (2016) Energy Pricing Optimization By Using Neural Network (NN) For Demand Site Tariff Strategy Peninsular Malaysia Case Study. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abu Hurairah, Azman (2005) Current Comparison Scheme In TNB Transmission Line System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abu Khir, Abu Bakar (2009) Design Of An Intelligent Switch For Low Voltage Distribution System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abu Musa Asha'ari, Mohd Sarif (2008) Uncertainty Measuring and Evaluating the Measurement of Gauge Block by Universal Measuring Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abu Naeem, Abdul Bahar (2013) Express Sole Dryer (ESD). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abu Seman, Zulfariz (2016) Automotive Exhaust Thermoelectric Generator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abu Talib, Siti Aznur (2016) Continuous Water Level Control Using Ultrasonic Sensor With 45 Degree Cut Pipe Insertion. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abu Ubaidah, Abdul Aziz (2009) Design And Development Of Robot Interface For Controlling 6 DC Motor Using Visual Basic. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abul Jalil, Mujahidah (2016) Round Nose Bullet Design Using High-Profile Curve Definition. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Achmad Umar, Baraja (2013) The Enhancement Of UTeM International Student Website : How Content Can Be Presented Using Minimalist Responsive Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Adam, Nur Ashikin (2018) Investigation Of Mechanical Properties And Microstructure When Processing Alumina-Based Cutting Tool Under Different Pressure Using Cold Isostatic Pressure (CIP). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Adam, Nur Wardah (2018) Thermal, Physical And Environmental Friendly Characteristics Of Bio Based Composites Derived From Sugarcane Fibre And Potato Starch. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Adam Farhan, Mohd Dasril (2013) Development Of Motor Speed Control System By Using Acceleration Characteristic At Forearm For Remote Control Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Adam Maleck , Hamid (2008) Part Combination Of Design For Assembly (DFA) Using Flow Analysis (EFA). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Addam , Paat (2009) Light Tracking Device For Solar Panel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Adeline, Lukar Herlino (2012) An optimal Adaptive Traffic Signal Control Algorithm. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Adenan, Muhammad Muizzudin (2016) Numerical Simulation Of Incompressible Flow Of Different Types Of Fluid In A T-Junction. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Adi, Saptari and Zuhriah, Ebrahim (2007) A Human Vision Sensitivity Analysis For Designing Better Human Machine Interface. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Adi , Saptari and Seri Rahayu , Kamat and Wan Hasrulnizzam , Wan Mahmood and Isa, Halim (2005) Analysis Of Workstation Design In Assembly Line For Small Scale Electric Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Adi Adli, Bahtiar Affandi (2012) Analizing Induction Motor Variables (Voltage Angular Velocity, And Efficiency) To Compare Between Nelder-Mead Method And Powell’s Method Of Optimization. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Adi Alif, Azim Ng (2012) Design, Development, And Fabrication Of Urinal Health Checking System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Adi Amri, Ruzman (2015) Human Movement Support Using Radio Frequency. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Adi Asharie, Sani (2008) Router Monitoring via SMS System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Adib , Md Jusoh (2006) Evaluating And Planning For Facilities Compliance OSHA's Ergonomic Regulation In Manufacturing Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Adibah, Azman (2014) Smart Anti-Abduct System (Theme Park) Using Radio Frequency Identification (RFID). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Adibah , Abu Bakar (2009) RFID Smart Room. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Adibah , Hasanuddin (2009) Software Development For Induction Motor Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Adibah Hanun, Mohd Arif (2015) Design, Analysis And Simulation Of Casting Defect On Water Pump Housing Using Casting Simulation Software. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Adilah, Abu Samah (2011) Study Of Design Consideration And Performance Analysis Of Substrate Integrated Waveguide Components. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Adiyana, Sukor (2011) An Investigation Of Human Factor Engineering And Human Behavior On Productivity. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Adli Zil Ikram , Abdullah (2013) Analysis the i beam subjected to three point loading or bending for different material. Project Report. UTeM, Melaka. (Submitted)

Adnan, Hassan (2010) Simulation Study On Active Ambulance Stretcher. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Adnan, Mohammad Noor Khairul Azrin (2008) Design And Development Of Cctv Using Webcam. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Adnan, Ahmad (2009) An Automatic Pouring Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Adnan, Ahmad Sallehuddin (2017) Design And Development Of Dough Proofer Machine For SMI Bakery Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Adnan, Anis Azwa (2017) Development Of Automated Key Management System Using LabVIEW. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Adnan, Nor Farahin Aida (2018) Process Optimization To Improve Surface Finish In Fused Deposition Modeling. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ady Izwan , Omar (2007) Video Graphic Array (VGA) Generator Using Complex Programmable Logic Device (CPLD). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Adzizol , Abdul Karim (2009) Design And Development Of Ultra-Wideband Wireless Tranmission. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Afandi, Abd Latif (2011) Application Of Material Selection On Bumper Fascia Based On Design For Sustainability (DfS) Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Afandi, Siti Fatimah (2017) Muscle Activity Analysis Using Surface Electromyography (sEMG) For Passenger While Riding Moving Train In Prolonged Stand. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Afda Rizan, Ismail (2005) Manual Wheelchair Design Improvements And Developments. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Afeeqa, Abd Ghani (2015) Cutting Tool Parameter Optimization For Surface Roughness Of Mild Steel Material Using Taguchi Methodt. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Affendi , Hussin (2008) Design, Analysis And Fabricate Of Pressure Vessel. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Afidatul Nadia, Mok Hat (2012) Simulation Of Worldwide Interoperability For Microwave Access (WiMAX) System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Afifah, Mohd Fauzi (2010) The Implementation Of Risk Management At Aerospace Manufacturing Company : Case Study 1 (Safety). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Afifah Maheran, Abdul Hamid (2006) Alat Kawalan Jauh Infra-Merah Pelbagai Peralatan Dan Litar Penerima. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Afifah Maheran, Abdul Hamid and Syafeeza , Ahmad Radzi and Noor Mazlina , Mahmod and Yan Chiew , Wong (2011) Applying Speech Recognition System In Learning Basic Arabic Language. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Afiqah, Sabari (2013) Space Vector Pulse Width Modulation For Industrial. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Afiqah, Ngah Nasaruddin (2015) Energy Audit And Conservation Of Energy In Melaka: Case Study Of Library. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Afisha, Yahya (2012) RFID Based Medical Database System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Afizrul Iman, Mohamed (2013) Storage Water Tanks Cleaning Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ag Puteh, Awang Faruq Haqeemy (2017) Experimental Study On The Dependency Of The Lithium-Ion Battery And Temperature Using Chi-Square Independent Test. Project Report. UTeM, Melaka. (Submitted)

Ag Yusop, Ag Mohd Hafizul Hasrul (2016) Sensitivity Study Of Rear Suspension Properties Toward Vehicle Dynamic Characteristic Using ADAMS. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Agata, Ngawang (2006) Speed Control Of Induction Motor Using Scalar Control. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Agus Setyo, Budi and Safarudin Gazali, Herawan and Mohd. Nizam, Ayob and Asmala , Ahmad and KT, Lau (2006) Investigation Of The Structure And Properties Of Phosphate Based Glasses. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahamad, Muhammad Imanuddin (2017) Design And Develoment Of IoT Quadcopter Using Microcontroller. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahamed Fayeez , Tuani Ibrahim (2008) Development Of Bluetooth GPS Receiver. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Ahmad, Abdul Majid (2009) Design Lizard Trap. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad, Ismail (2009) Study On Predictive Maintenance Of HVAC System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad, Aeriyn Dwierni (2016) Pigeon Hole Notification System By Using Ethernet Technology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad, Akmal Abdul Rahim (2017) Spare Parts Optimization (Valve) For Boiler At Coal Fired Power Plant. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad, Azharudin (2017) Optimization Of RTCS Main Frame By Using Numerical Method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad, Azriadih (2016) FE Modelling Of Tensile Behaviour Composite Material Using Altair Hyperworks. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad, Kamarudin (2009) Vibration Analysis Of Turbine Generator Based On Onboard Data. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad, Madiha Husna (2017) Optimization Of Friction Stir Welding Parameter On Aluminium 5052 Alloy By Using Taguchi Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad, Mohamad Alif Fayumi (2017) Design And Analysis Of Foldable Human Powered Vehicle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad, Mohd Aireen (2016) Evaluation On Difference Working Posture Using RULA Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad, Mohd Syahron Naim (2017) Development Of Tire Pressure Alarm System For Motorcycles. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad, Muhammad Hafizul Hizam (2016) Dual Band And Dual Polarized Microstrip Patch Antenna. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad, Muhammad Muhaimin (2015) Design And Assemble Photovoltaic Panel Using Monocrytalline Cells. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad, Muhammad Sahril (2016) Performance Evaluation Of Fluid In A Pipe Of Heat Exchanger. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad, Muhd Hairill Neimi (2016) Study On Dielectric Strength Improvement Of Reclaimed Used Transformer Oil Using Fuller Earth. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad, Muhd Hairill Neimi (2016) Study On Dielectric Strength Improvement Of Reclaimed Used Transformer Oil Using Fuller Earth. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad, Nur Ainina (2009) Statistical Analysis And Optimization Of A Low Noise Amplifier Operating At 5.8 Ghz ISM Band. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad, Nur Fatin Afiqah (2018) The Development Of Capacitive Power Transfer For Biomedical Implantable Device. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad, Nurulnabilah (2017) Preparation And Characterization Of Hematite Iron Oxide/CNT For Photocatalyst. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad , Ismail (2006) Pembangunan Model Kren Menggunakan PIC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad , Yaakob (2010) Evaluation Study On Static Analysis Of Automotive Brake System Using Numerical Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Aiman, Che Zakeria (2015) Handgrip Pressure And Hand Movement Analysis While Driving On Perodua's Car Steering Wheel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Airfan, Khalid (2009) Perbandingan Kesan Pengurangan Bunyi Oleh Penyenyap Bunyi Jenis Gabungan Dan Penyenyap Bunyi Jenis Tunggal. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Aizan, Zulkefle and Ahmad Idil, Abdul Rahman and Maslan, Zainon and Zaihasraf, Zakaria (2010) Analysis of Lightning and Switching Waveshapes Using TMS320VC5416 DSP Processor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Aizat, Ahmad Ramly (2009) Ergonomics Evaluation And Design Of The Hand Tools Used In Manufacturing Industries. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Aizat, Noh (2015) Glass Bottle Defect Detection By Using Image Processing Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Akmar, Ahmad Zahin (2017) Design Of Automatic Workplace Clamp For Bridgeport Vertical Milling Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Al-Hakim, Shamsudin (2013) The Assessment Of Switchgear System Using Circuit Breaker Profiler. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Anas, Yusof (2006) Energy Efficient Fluid Power Transmission Research. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Anas, Yusof and Zairulazha, Zainal and Mohd Khairi, Mohamed Nor and Nor Salim, Mohammad and Mohd Firdaus , Rameli and Khairul Nizam, Khalid (2008) Energy-Saving Compact Hydraulic Power Unit. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Anwar , Hamdan (2008) Study Performance Of Cylindrical Grinding On Surface Roughness. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Anwar , Mohamed Sabri (2013) Sistem Kawalan Brek Anti Kekunci (ABS). Project Report. UTeM, Melaka. (Submitted)

Ahmad Ashraf, Rawee (2013) Performance Analysis Of Video Call Application On Tablet Using 3G Network. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Asyraf, Shari (2008) Non-Intrusive Liquid Level Detection System Using Ultrasound Technology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Azan, Amirah Diyana (2017) Effect Of Layer Thickness And Fill Angle On Flexural Properties Of Carbon Fibre Reinforced ABS Printed Part. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Azfar, Mahmami (2015) The Application Of Differetial Box-Counting Method For Iris Recognition. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Azhar, Izzaim Danish Fathullah (2017) Electrostatic Chamber Development For Dust Collector. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Azhar , Omar (2008) Control Of Bus Suspension System Comparison Between Lead Lag Compensator And State Feedback Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Azlan Shahibuddin , Abdul Manaf (2008) Feasibility Study On Design Of Grass Removing Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Azmir , Ahmad Tarmizi (2008) Kajian Tentang Mereka Bentuk Brek Letak Kereta Elektrik Untuk Kereta Penumpang. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Basyir, Adri (2011) Home Security System VIA SMS. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Bustaman , Arifin (2005) Net Monitoring System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Danial, Zakaria (2015) Development Of Thin Flat Chassis Of Multipurpose Remote Controlled Powered Platform. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Deli, Mohd Noor (2009) Menganalisa Keadaan Bukan Linear Analisis Unsur Terhingga Terhadap Rasuk Daripada Struktur Badan Bas Apabila Dikenakan Daya Lentur. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Dugel, Muhamad Sufian (2017) Implementation Of Safety Divider Downhill Road With The Transmutation Concept. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad Edham, Mohammad (2009) Optimal Dynamic Inversion Based Control Of An Overhead Crane. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Fadhil, Dzulkafli (2011) Performance Evaluation Of Coordinate Measuring Machines. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Fadlishah , Ahmad Foad (2009) Robocon Manual Robot Gripping Mechanism. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Ahmad Fadzi, Ahmad Ridhwan (2017) Corrosion Behaviour Of Mild Steel Coated With Epoxy-Graphene Film In 3.5 wt.% NaCI Solution. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Fadzil , Zainudin (2009) Portable Wind Power System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Fadzlan , Mustapha (2005) Switch Port Monitoring Tool. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Ahmad Fahrulrazie, Mohamad (2011) Performance Comparison Of Packet Transmission Over IPV6 Network On Different Operating System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Faiz, Hamzah (2010) Analysis Of Lubricant Performance For Motorcycle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Faiz, Kamarul Zaman (2009) Design Improvement Of Existing Executives Chair In UTeM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Faiz , Mohd (2010) Analyzing DNS Query And Response. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Ahmad Faiz Fikri, Ghazali (2009) Study Of Energy Absorption Of Motorcycle Safety Helmet. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Faizal, Azmil (2008) Finite Element Modeling, Analysis And Simulation Of Wide Rim Alloy Wheels. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Faizal, Baharudin (2005) Wagon Elektrik : Pembangunan Yang Di Guna Di Dalam Pembuatan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Faizal , Ahmad Jamil (2008) Joining Performance Of Aluminium T6063 Using GTAW Welding. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Faizal , Yaacob (2008) Vehicle Active Steering System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Faizol, Ismail (2009) Comparison Of Two And Three Plate Molds Plastic Injection Molding For Mold Design Selection. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Faizol, Ismail (2005) Developement Of A Low Cost Hydraulic Oil Purifer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Faizul Bukhari, Mat Tahir (2009) Valve Flow Control Using PWM (PIC). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Fakhruddin , Yusoff (2007) Pembangunan Perisian Untuk Pengimbas Kod Bar. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Fakhrullah, Abdul Rashid (2015) The Effect Of Engine Oil On Vehicle Fuel Consumption. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Falah , Zainol Azzudin (2007) Generate High Frequency Mechanical Vibration. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Farid, Sapar (2012) Development of Energy Audit Software For Lighting Systems. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Farid, Mohamad (2010) Smart Casing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Farid, Zaini (2015) Effect Of Surface Roughness On Tribological Properties Of PKAC-E Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Farid , Mohammad (2008) Evaluation Of Environmental Factors On Production Site In Precision Industry Using Ergonomic Assessment. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Faris Firdaus, Mohd Zahidi (2012) Detection Of Winding Deformation In TNB Distribution In Service Transformer Using Cross Correlation Co-Efficient Analysis Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Fariz, Faizal Lim (2008) The Study Of Optimum Condition To Produce Rubber Induced Polymer (Polyethylene). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Fashli Afif, Abdul Hamid (2015) Electrical Discharge Machining Of AISI 304 Stainless Steel Using Mixture Of Deionized Water And Carbon Nanofiber With Surfactant. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Fathul Hakim, Rosli (2015) Green Cycling Helmet With Adjustable Light ''Be Safe Be Seen''. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Fauzi, Ahmad Kamar (2007) Simulation Study Of Motor Controller via Voice Command. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Fhadli , Salleh (2008) Effects of Tool Length In Milling Operation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Firdaus, Mohammad Mohsin (2010) Design Of Automotive Chassis Electrical System Training Board. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Firdaus, Ibrahim (2012) Solar Power Backup For Heavy Duty Lighting. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Firdaus, Mohd Azmi (2010) System Development Of An Initiation Sequence Using Face Recognition Technology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Firdaus, Zali (2009) Merekabentuk Prototaip Lampu Isyarat Pejalan Kaki Menggunakan PIC16F877A Microcontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Fisal, Muhammad Faiz (2016) Design And Optimization Of Automotive Suspension Test RIG. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Fitri, Ab Halim (2008) Analysis And Flexural Strength Of Mullite-Bonded Silicon Carbide Fabricated Using Various Uniaxial Mechanical Pressure And Milling Duration. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Fitri, Sukarman (2010) Implementation Of Design For Manufacturing And Assembly (DFMA) Methodology To Analyze Antitheft Device System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Fitri , Md Zain (2008) Summon Management System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Ghazali , Zulcefli Muhammad (2009) The Investigation Of Effect Of The Capillaryty On The Penetrant Testing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Hafizi, Mohamad (2011) Automatic Railway Gate Control By Using Microcontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Hafizuddin, Zakaria (2009) Design And Development Of Smart Poultry House And Eggs Cleaning Systems. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Hakimie, Othman (2012) Sport Training System With Android Based Applications Using Wireless Connectivity. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Hamidon , Ali (2008) UTeM LAN Voice Chat. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Ahmad Hanafiah, Syahirah Hanani (2017) Active Control Of Quarter-Car Suspension System Using Linear Quadratic Regulator. Project Report. UTeM, Melaka. (Submitted)

Ahmad Harris, Abd Hamid (2013) Design Of A Low Cost Portable Heart Beats Monitor Using Infrared Sensor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Hatta, Abdullah (2008) Design And Development Of Fuzzy Logic Based Level Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Hazwan, Fauzi (2009) Parking Brake Tester. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Hiedzuanuddin , Ahmad Khidir (2012) Design Low Noise Amplifier With Ultrawideband Frequency. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Hisyamuddin , Hassan (2013) Novel EDM Screw Threading Technique Using Threaded Cavity Electrode. Project Report. UTeM, Melaka. (Submitted)

Ahmad Humaizi , Abd Jamil (2006) Rekabentuk Dan Fabrikasi Kereta Elektrik Fuel Cell Serba Ringkas. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Idil, Abdul Rahman and Ahmad Aizan, Zulkefle and Ahmad Fairuz, Muhammad Amin and Maslan , Zainon and Mohd Ridzuan, Rozali (2010) Automatic Speaker Identification System for Robot Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Ismail, Man (2008) DC Motor Speed And Position Control Using Analog PID Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Jamal, Salim and Abdul Hamid, Hamidon and Muhammad Shahril, Johal (2004) Intelligent Microcontroller Traffic Light System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Jamal, Salim and Soo, Yew Guan and Radi Husin, Ramlee (2013) Physiological Using FGPA In Health Monitoring System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Kamal , Mohammad (2006) Design And Implementation Of Carbon Monoxide (CO) And Nitrogen Dioxide (N02) Detector By Using Peripheral Integrated Controller (PIC). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Kamely, Mohamad and Johny Purnomo, Joewono (2013) Performance Analysis Of Mechanical Properties And Weldment Area Of Aluminium Alloys. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad KasyafHamdi, Ahmad AFandi (2009) Web Design For Energy Auditing Practice. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Khairi, Muhammad Syahmi (2017) The Development Of Semiautomatic Vertical Ladder For Domestic Application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad Khairul Fazli, Nadzri (2009) RF Control Of A Multi-Tasking Vehicle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Khairul Radhi, Kamaruzaman (2008) PID And State-Feedback Controller Design By Using Matlab. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Latifi, Yaacob (2007) Investigation Of Machining Defects On Rolled Steel Plate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Lotffi, Zakaria (2015) Digital Stopwatch Water Crops With GSM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Lutfi , Dahari (2013) Menilai prestasi enjin diesel menggunakan campuran minyak sayuran dengan diesel sebagai bahan api. Project Report. UTeM, Melaka. (Submitted)

Ahmad Mawardi, Adilla Fasha (2017) Effect Of Applied Load And The Sliding Speed On The Subsurface Deformation Of Wear On Hybrid Metal Matrix Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Mokhtar, Muhammad Shauqi (2016) Wear And Friction Profiling Of Zinc Ion Induced Corn Oil Based Bio-Lubricant. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Murad, Farah Aini (2016) 6.0 Ghz Antenna For Wireless Communications. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Mursyid, Ramli (2015) Speed Control Of DC Motor Using MOSFET. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Musli , Osman (2009) Comparative Study Of End-Mill Performance Between Straight And Spiral Flute. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Muslim , Othman (2008) Failure Analysis On TIG Weldment. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Mustafa, Ali (2013) A Study Of The Influence Of Cutting Parameter On Surface Roughness And Surface Morphology In High Speed Milling. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Muzahar , Mohd Zainal (2005) Menghasilkan Daya Tujahan Dengan Menggunakan Motor Dan Propeler. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Nahran, Luqman El Hakim (2017) Experimental Investigation On Energy Absorption Capacity Of Mild Steel Cone Subjected To Axial Crushing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Naim, Ismail (2010) Identification And Reduction of Noise And Vibration level On Rear Handle Of Handheld Tools Using Fast Fourier Transform (FFT) Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Nasafi, Mohamad (2006) ECG Signal Analysis By Joint-Time Frequency Distribution. Project Report. UTeM, Melaka. (Submitted)

Ahmad Nasri, Mior Hezeri Akmal (2016) Development Of A Wall Climbing Robot For Cleaning Crude Oil Storage Tank. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Nawir, Nur Amalina (2017) Development Of The Home Appliances Controller Based On DTMF Signal. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad Nazri, Ahmad Danial (2016) Home Appliances Monitoring And Control Using Smartphone Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Nidzamuddin , Najib (2008) Development Of Safety System For XY-Table. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Nizam, Mohd Jahari@Mohd Johari (2005) Robot Mobil Pengesan Cahaya (Photoresistive Light Tracking Mobile Robot). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Nizam, Afiq Syazwi (2016) Optimization Of Process Condition On Loading Degree Of Magnetic Composite Sheet By Lumen Loading Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Noh , Salleh (2010) Design Analysis And Simulation Of A Railing System Security Cage At Taman Buaya. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Nor Syahid, Hassan (2013) Self Organizing Map Technique For Transformers Condition Monitoring From SFRA Result. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Nordin, Mohd Firdaus (2017) Design Of Integrated 3D Printer Recycle Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Nordin , Mohd Shaifudin (2012) Performance Analysis Of Point To Point Communication For Land Public Transport Via Wireless Communication. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Nur Qamari, Mohd Azhari (2009) Improvement Of Mechanical Properties Of Aluminum Alloy By Artificial Aging Treatment For Structural Application In Automobile. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Rashidi , Ahmad Fauzy (2007) Infrared Robotic Using Microcontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Rasydan , Hasan (2009) An Experiment Study Of The Effect Of RPM On Turning Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Razif, Rabudin (2009) Research Study On The Noise Level At The NGV Engine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Razli, Mohd Faez (2016) Gas Leakage Monitoring Over The Net With Raspberry PI. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Rezduan, Zainal (2009) Development Of New Third Light Brake Signal On Motorcycle Helmet. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Ridhan, Ramli (2012) Simulation Developement Of Step Down DC Converter Based On Multicell Topology Using PSIM 9. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Ridhwan, Abdul Rahman (2009) Apparatus Embodiment Of Solar Power Pump. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Ridhwan , Abdullah (2008) Design And Development Of Antilock Braking System For Motorcycle 110 Cc. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Ridzuan , Ab. Wahab (2008) Microwave Filter-Stepped Impedance Lowpass Filter At 2.4GHz. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Ahmad Rijal , Abdul Rahman (2010) Maintenance Monitoring System Using Visual Basic. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Sabri, Mohamed (2010) Pemindahan Haba Di Dalam Rumah Dengan Menggunakan Rockwool. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Sabri, Muhammad Irshad (2017) Smart Monitoring Water Quality Detector. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad Sadhiqin, Mohd Isira and Adi, Mohd Khafe and Zamre, Abdul Ghani (2010) Active Steering System Based on Nonlinear Control System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Sadhiqin, Mohd Isira and Adie, Mohd Khafe and Mazran, Esro and Zamre, Abdul Ghani (2010) Wireless Voice Controlled Wheelchair. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Saifulnizam , Amron (2010) Heat Treatment And Mechanical Property Of Ti6A14V. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Salsabil Zaky, Irfan Zaky (2009) Speed And Position Trainer For Analog P, PI, PD, And PID Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Sarbaini , Syahirah (2016) Implementation Of Various Bio-Material As Double Negative Metamaterial Build In For Ultra-Wideband (UWB) Antenna Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Shaarizan, Shaarani and Maslita, Abd Aziz (2011) 3D Expressive Animated Body Movements For Virtual Humans In Malaysia Culture. Project Report. UTeM. (Submitted)

Ahmad Shafie, Razak (2015) Comparative Study On Differene Approach Of Boothroyd Dewhurst (B-D) Design For Assembly Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Shahril, Razali (2011) Effect Of Size Of Bolt On The Relative Critical Slippage Of Bolt-Nut Joint Under Transverse Loading. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Shaiful Redha, Razak (2011) Design And Development Of Substrate Integrated Waveguide (SIW) Bandpass Filter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Sharul Adli, Mohammad (2005) Multipurpose Ladder. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Sibi, Mohd Yazid (2016) Incorporating Flywheel Hybrid Module In Motorcycle : Prototyping And Testing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Sobri, Dahalan (2011) Pemasangan Kincir Angin. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Sobri, Ishak (2009) Development Of Aerodynamic Smoke Tunnel Unit For Teaching And Learning. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Sufi, Abdullah (2008) Brikueting Panas Habuk Kayu. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Sufian, Md. Ali (2006) Menganalisis Dan Membangunkan Penggalak Isyarat FM (Analyze And Build A FM Signal Booster). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Suzaimy, Sukor (2010) Renewable Energy (Wind Power) Mini Prototype Plant With Scada System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Suzairy, Sukor (2008) Velocity Measurement Of Flowing Particle Using Combination Of Laser And Optical Sensor. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Ahmad Syafiq, Baharin (2009) Experimental Modal Analysis On Flexible Plate Structure Using Forced Vibration Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Syafiq , Juwaini (2010) Analyze Bonet Activity By Identify The Difference Between Normal And Abnormal DNS Traffic. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Ahmad Syafuan , Sulaiman (2009) Transmission Of Audio And Video Signal Using Square Wave Frequency Modulation. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Ahmad Syahid , Mohamad (2009) A Study On The Application Of Value Stream Mapping In Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Syahir, Sulaiman (2012) Analisis Daya Seret (Drag Force) Terhadap Rak Bumbung Kereta Kompak Dengan Menggunakan Kaedah Simulasi Dinamik CFD. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Syahir , Zulkiffli (2010) Effect Of Coil Size To Performance Of Linear Moving Coil DC Motor On Positioning System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Syahmi, Basri (2014) Design Parameter Investigation Of Single Mode Silicon-On-Insulator (SOI) Parallel Cascaded Moicroring Channel Dropping Filter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Syauqi, Hanas (2013) Peranti Pemadam Kebakaran Automatik Kenderaan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Syauqi, Hanas (2013) Peranti Pemadam Kebakaran Automatik Kenderaan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Syauqi, Ahmad Shukri (2012) Natural Convective Heat Transfer In Square Enclosures Heated From Below. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Syazili, Md Din (2015) Investigation On The Effect Of Machining Strategies On The Surface Finish And Dimensional Accuracy Of Five-Axis Flank Machining Of Curvy Angled Shapes (CONVEX). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Syaznan, Mohd Asri (2011) The Design Of A Guessword Game Via PIC Microcontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Syazni, Ahmad Akmar (2012) Effect Of Heat Treatment On Impact Strength Of Aluminium Alloy. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Syazwan, Che Muhamad (2009) Pitch Controller For Aeroplane Using PID Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Syirwan Adli, Hamzah (2007) Analysis Of The Influence Of Electrical Discharge Machine Die Sinking Parameters On material Removal Rate Of Mild Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Tajuddin, Hamzah (2006) Knowledge Based System For Material Selection In Bumper Beam Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Tajuddin, Arifah Nabilah (2016) Design Of Microwave Resonator Sensor For Material Characterization. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Tajudin, Ahmad Farhan (2017) Fluidized Bed Granulation Process : Effect Of Chamber And Binder Temperature On Granule Physical Properties. Project Report. UTeM, Melaka. (Submitted)

Ahmad Taqiuddin, Ahmad Sarimin (2015) Analysis And Simulation Of Service Continuity Enhancement By Using Automatic Protection System (APS) In Fiber Optic Communication Link. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Tarmizi, Md Nor (2010) Coordination Protection System In Industrial Plants. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Tarmizi, Ajwad Nadhirah (2009) Vision System For Autonomous Underwater Vehicle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Witry Quayum, Mohd Nor (2015) Exploring And Designing Actuator For Neonatal Baby's Chest Simulator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Yusairi, Bani Hashim and Abdul Rahim, Samsudin and Mohd Syafik, Jumali and Cheong, Teik Keon (2008) Development Of Zlatanov-Gosselin Robotic System. Project Report. UTeM, Melaka Malaysia. (Submitted)

Ahmad Yusairi, Bani Hashim (2013) Development Of Open System And Application Mobile Platform For All Terrain Locomation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Yusoff, Ahmad Ramadhan (2017) Application Of Knowledge Based Engineering In Designing Automobile Rim And Macros In CATIA. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Yusri, Che Mat (2009) Automatic Control For Leaching Process. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Ahmad Yusri, Yaacob (2006) Implementation Of Image Enhancement Algorithm. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Za'im, Zulkefli (2010) Design And Fabrication Of Heat Exchanger - Radiato. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Zahidi, Muhammad Zulfadli (2017) Experimental Study On The Effect Of Air-Fuel Ratio On Performance Of Spark Ignition Engine Fueled With H2O2 Gasoline Blend. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Zahirudin , Mohamad Ramdzan (2008) Proses Pengoptimuman Parameter FDM Bagi Material ABS. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Zaidi, Ideris (2011) Mechanical Properties Of W/Cu-Zn Metal Composite Via Mechanical Alloying. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Zaifazlin , Zainordin (2009) Magnetorheological Brake System Characterization Using Non Parametric Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Zainuddin, Ahmad Syahmi (2018) Fabrication And Characterization Of Carbonized Electrospun Nanofibres From Polyacrylonitrile And Polyvinyl Alcohol Precursors. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad Zakhirie , Mohamad (2007) A Study Of Design And Development Of 'Songket' Weaving Automatic Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Zaki , Abd Razak (2008) Preliminary Investigation Of Automobile Hydraulic Transmission System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Zaki , Shukor and Fariz, Ali @ Ibrahim (2006) Design And Implementation Of A Search And Retrieval Mobile Robot For Application Oriented And Practical Based Educational Purposes. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Zakuan, Ahmad Dahalan (2012) Analysis Of Lightning-Caused Ferroresonance In Capacitor Voltage Transformer (CVT) Using Harmonic Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Zharif, Azizan (2008) Control Of Wheeled Mobile Robots. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Zharif Rabbani, Rozali (2008) Flow Investigation Around Sphere In Open Circuit Wind Tunnel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Zul Fadzli, Mansor Taridi (2009) Simulation For Helicopter Control System Using LQR Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Zulfadli , Ahmad Nazari (2008) Voice Interactive Game Using Speech Recognition. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Ahmad Zulhelmi, Ab Hamid (2010) Cooperative Space-Time Block Coding. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Zuraimi, Zulkifli (2005) Mekanisma Robot Selari - Pembangunan Bagi Pengasingan Produk Dalam Proses Pembuatan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmed Fauzi, Mohamed Fiqri (2018) Comparison Of Laminar And Turbulent Model Of Water Flow In Microchannel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmed Ismail, Amar Awad Mohamed (2017) Development Of Obstacle Avoidance Algorithm For Robotic Wheelchair. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmed Salem, Mohammed (2017) The Investigation Of Trajectory Generation Of A Curved Wall Brick Laying Using 5 Dof Mobile Robot. Project Report. UTeM, Melaka. (Submitted)

Ahmed Yahya, Tawfik (2015) Force Characterization Of An Electromagnetic Linear Actuator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aida Adlina , Mohamad Raffi (2006) Machining Performance Of Titanium Carbide (TiC) As Tool Coating. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Aida Bahiyah, Mohd Rodzi (2009) Labor Utilization And Man To Machine Ratio At A Semiconductor Facility. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aidalina, Mahmud (2006) Automatic Reclosing System : Smart Protective Circuit Breaker. Project Report. UTeM, Melaka. (Submitted)

Aidil Azhiim , Shamsuddin (2010) Short Term Load Forecasting With Fuzzy Logic Algorithm. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aidil Azlan, Ahmad Zamri (2008) Laminar Natural Convection In Enclosure Containing Fluid. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aidil Fariha, Othman (2008) Vibration Analysis For Diagnostic Of local Faults In Rolling Element Bearing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aiman Arrif, Ahamad Tarmizi (2012) Design And Fabricate A Brake System And Mechanism. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aiman Hilmi, Azhar (2010) Design Of Low Noise Amplifier For WiMAX Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aimi Faridah , Tajuddin (2010) Power Flow Allocation In Deregulated Power System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aimie Nazmin , Azmi (2006) The Design Of High Voltage Generator Using Ignition Coil Up To 50 Kilovolt (kV). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ain Fathihah, Mohamed Yusoff (2015) The Effect Of Fibre Size, Fibre/Matrix Interphase Adhesion And Fibre Loading On Mechanical Properties Of Bio Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ain Natasha, Marafi (2013) Design Of A Reactive Power Compensation For Transmission Line Voltage Sags Due To Faults. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aina, Mohd Sukarno (2015) Analysis On Human-Robot Collaboration Through Affective Engineering. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aina Fairuz, Mohd Ariffin (2013) Paddy Field Irrigation Control System By Using Programmable Logic Control (PLC). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aini , Ahmad (2009) Seedling Diameter Measurement With Application Of Infrared. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Aini Fathillah , Hassan (2008) Learning Management System For Mobile Device (LMS). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ainul Izzati , Zakaria (2009) PC Based DC Motor Speed Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ainun Naziroh, Ahmad Sukri (2015) Analogue Electronic Trainer (BJT). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Airin, Jalani (2006) Space Station Tracking System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aisha , Abd Ghani (2010) Design And Development A Line Following Mobile Robot For Multipurpose Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aishah , Mazelan (2010) Effect Of Re-solution Heat Treatment Temperature On The Impact Toughness Of An Aluminum Alloy For Automotive Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aishah Illani, Sulaiman (2013) Wearable Microstrip Patch Antenna. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aishatul Rodhiah, Mohamad (2009) The Study Of Rings Under Quasi-Static Loading. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aisyah, Mohamad Jusoh (2015) Emission Inventory For Area Sources: Case Study For Workshop. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aisyah Almajidaf Tan, Sofian Tan (2007) Effectiveness Of Oil Consumption At Motoring Test Case Study: Automotive Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aizat, Mohamed Ali (2008) Measurement And Evaluation Of The Reverberation Time For Classrooms In UTEM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aizat Fuad, Ahmad Shatar (2009) Studies And Design Of Suspension System For A Formula SAE Racing Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aizilia , Mat Affim (2007) Development Of A 3G Bandpass Filter Using Microstrip Technologies. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aizuddin, Arbi (2009) Design A Charge Controller For Wind Generator. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Aizuddin , Pata Ariffin (2007) Design And Development Of CIM System - Lifter Platform. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Aizuddin Fahmi, Mohd Riduan (2015) Modelling And Simulation Of Cylinder Deactivation System Applied To Passenger Vehicles. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ajmal , Muhamad Sazali (2007) Propeller Led Display. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Akhmal Khalis , Mohamad Isa (2007) Mobile Game-Grab More Money. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Akin, Gwynnie Chembat (2009) Real-Time Fuzzy Logic Position Controlled DC Motor Drives. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Akmal, Azmi (2008) Mereka Bentuk Sistem Nozel Automatik Untuk Mesin Pemadam Api Mudah Alih. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Akmal, Suriati (2017) Ontology-Based Approach To Elicit Precise Information For Accurate Automotive Product Development. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Akmal Hakim , Musah (2008) DC Motor Speed Controller Using PIC16F876A. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Akmarina Izza, Mokeri (2013) Smart Parking Via RFID Tag. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Akwanizam, Azmi (2009) Analysis And Measurement Fiber Optic Fault By Using Optical Time Domain Reflectrometer (OTDR). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Al Amin, Mohamed Sultan (2009) Development Of General Value Stream Mapping For Productivity Improvement And Kaizen Implementation At An Aerospace Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Al Amin, Mohamed Sultan and Mohd Warikh, Abd Rashid and Sivarao, Subramonian (2012) Design and Development of Circular Work Clamping System for Non-Contact Machining Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Al Khan , Abdul Gani (2008) 3D Animation Story "Cintailah Sungai Kita". Project Report. UTeM, Melaka, Malaysia. (Submitted)

Al-Awazangi , Sha'arani (2009) RFID Smart Key Detector. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Al-Bakri, Abdulrahman Mohsen Saleh (2017) Design Of Control And Integration Strategy For Multiple Handling System Using Programmable Logic Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Al-Khawlani, Hafedh Abdullah Mofreh Dhafer (2016) Design Of Antenna With Notch Filter To Support Multifunction Operation Standards In Wireless Communication Systems. Project Report. UTeM, Melaka, Malaysia. (Submitted)

AlGumaei, Mohammed Yahya Qaid (2016) Design And Development Of Dual-Band RF Switch At 2.3 Ghz And 3.5 Ghz For Wireless Communication. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Alagendran, Andiappan (2013) Developing Lean - EMS Integration Database For Sustaining ISO 14000 Certification. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Alagendran, Andiappan (2013) Developing Lean - EMS Integration Database For Sustaining ISO 14000 Certification. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Alamin, Mohammad Al Akeef (2017) Implementation Of Energy Monitoring For Solar System. Project Report. UTeM, Melaka. (Submitted)

Aldarji, Adeb Ahmed Saeed (2017) A Study On The Effect Of Varying Fiber Contents To The Physical And Moisture Absorption Characteristics Of Hybrid Oil Palm Empty Fruit Bunch/Kenaf Reinforced High Density Polyethylene Composites For Automotive Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Alfian, Haris (2008) Alat Penjimat Kuasa Elektrik (Power Saver). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ali, Alexander (2017) Investigation Of Contamination In Ball Bearing Operated Under Hexagonal Boron Nitride (hBN) Nanoparticle Additives Mixed With Engine Oil. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ali, Khalis Alwi (2018) Effect Of Different Concentration Of Carbon Nanotube (CNT) In SAC305 Solder Alloy On The Hardness, Wettabilitty And Resistivity Under Thermal Aging. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ali, Nazarudin (2016) Flexible Metasurface-Enabled Antenna For Wearable Medical Body-Area Network Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ali, Nurul Fatihah (2016) Emergency Voice Detect Tracking System Using Mobile Phone. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ali Adzha , Ishak (2007) Pengiraan Dan Analisis Bagi Gear Transmisi Menggunakan Pengaturcaraan Komputer Papan Pemuka Bergrafik. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ali Ilman, Abdullah (2012) Study Of Optimizing HX1 Car Air Conditioning Heat Exchanger By Using CFD Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ali Mohamed, Ahmed Abbas (2017) A Modified PID Controller For DC-DC Boost Converter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ali Mohammad, Sulaiman (2017) Control And Navigation Of Aerial Drone In Harsh Environment Using APM. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ali Nordin , Ismail (2009) Optimization Of Wind Sourse For Maximum Electric Power Generation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ali Othman, Syafiq (2015) To Map 3 DOF Waist Power Assistive Robot Motion Using Neural Network. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Alia Ruzanna, Aziz (2009) Mereka Bentuk Dapur Suria Yang Praktikal Digunakan Untuk Memasak. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aliaa Syahirah, Abd Rashid (2013) Analysis Of Android Malware (Droidkungfu 2) Through Their Behavior Using Static Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Alias, Mohd Aswarizal (2008) Kon Keselamatan Mudah Alih. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Alias, Farah Nurhidayah (2017) Design For Improvement Of Metrology And Inspection Of Integrated Circuit For Accuracy Check Using Smartscope Application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Alias, Nor Hasrin Nadia (2017) A Statistical Model For Determining Friction And Wear Of SK11 Ball Bearing In Nanoparticles-Enhanced Engine Oil. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Alias , Khamis and Azhar, Ahmad and Azhan, Ab. Rahman (2010) Compressed Air Energy Storage for Power Generation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Alif Zulfakar , Pokaad (2008) Kecekapan Haba Ekzos Dan Penggunaan Bahan Api Tentu Brek (BSFC) Enjin Diesel Dengan Bahan Api Biodiesel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aliman, Selamat (2011) Evaluating Kismet And Wifi Manager As Wireless IDS. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Alita, Dewi and Aida Fazliana , Abdul Kadir (2005) Computer Aided Education In Electrical Engineering. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Allah Ditha Khan, Abdul Rim (2006) Action Game For Mobile Phones : Silat Lagenda. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Alwi, Zulkefli (2009) Simulation And Control Of Water Tank System Using LabVIEW And Automation Studio. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Alwiy, Muhamad Fauzie (2017) Design Of Personalised Insole For Production Line Industrial Workers Via Level Of Pain And Pressure Distribution Data. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Alyaa Izzati, Hashim (2010) Study And Preliminary Design Of High Speed Impact Test Machine Using Hopkinson Bar Test Principle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amaluddin, Zainuddin (2015) Wireless Power Transfer For Electric Vehicles. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aman, Mohd Azizi (2017) Design And Optimize The Interior Design And Furniture Mechanism Of Modular Unit Of Food Truck. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amar Ridzuan, Abd Hamid (2011) Design And Fabrication Of Glass - Fiber Composite Bodywork For UTeM Formula Style Race Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amat Ali, Nur Abidah (2017) Optimization Of Channel Assignment In Mobile Communication Using Tabu Search. Technical Report. UTeM, Melaka. (Submitted)

Amat Amir, Basari and Mohd Shakir , Md Saat and Khisbullah , Hudha and Zulkarnain, Zainuddin and Adie, Mohd Khafe (2008) Control Of Quarter Car Nonlinear Active Suspension System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amat Sahari, Muhammad Haziq (2017) Effect Of Rolling And Heat Treatment On Mild Steel Plate. Project Report. UTeM, Melaka. (Submitted)

Ambo, Nur Farhani (2016) Enhancing The Breakdown Voltage Of Natural Ester Insulating Oil By Optimizing Mixed Antioxidants For Power Transformer Applications. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ambo, Nur Farhani (2016) Enhancing The Breakdown Voltage Of Natural Ester Insulating Oil By Optimizing Mixed Antioxidants For Power Transformer Applications. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ameen , Mahadi (2008) Developmet Of Human Interface (HMI) For Flexible Manufacturing System (FMS). Project Report. UTeM, Melaka,Malaysia. (Submitted)

Ameenah, Am Abdul Aziz (2009) Kajian Dan Penghasilan Penapis Seramik Bagi Proses Tuangan Aloi Aluminium. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amer, Mohammad Saifullah (2016) Development Of Electronic Notice Board Using Wireless Technology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amer Adli, Mohd Dzainudin (2010) Study Of The Effect Of Temperature And Relative Humidity On The Measurement Variance Conducted In The Metrology Lab, FKP. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ameran, Noorleysa Farahani (2016) 1.5V To 24V Adjustable DC Power Supply Design Based On Bang-Bang Control Of Buck Converter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ameyrullah, Arshad (2007) Merekabentuk Dan UjIkaji Penunjuk Paras Kandungan LPG Di Dalam Selinder. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ami, Amir Ashraf (2017) Development Of Equipment For Loosen And Tighten Of Lug NUTS By Using Gear Concepts (Special Lug Wrench Tool). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aminatul Munauwarah, Yahaya (2012) Wireless Alert System For Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aminuddin, Abdul Wahab (2008) Development Of Controller For Back Cover Assembly Station For Flexible Manufacturing System Using Programmable Logic Controller (PLC). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aminuddin, Nurul Nadia (2017) Design And Modelling A Three-Phase Grid-Connected Photovoltaic At Low Voltage Network And Its Performance Using PSCAD Software. Technical Report. UTeM, Melaka. (Submitted)

Aminur Hazieq, Zulkefli (2016) Study Of Adsorbent Effectiveness On Reclaimed Transformer Oil. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Aminurashid, Meor Azizul Fitri (2016) The Theoretical Of Dimensional Measurement By Vision System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aminurrashid, Noordin and Mohd Azli, Salim and Mohd Hanif, Che Hasan and Mohd Razali, Mohamad Sapiee and Sulaiman, Sabikan and Zamani, Md Sani (2011) Development Of 4-Legged Walking Robot And Movement Algorithm. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amir, Azuwaizie (2010) Implementation of RFID Technology At The Zoo Entrance System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amir, Halil (2009) Preliminary Design Analysis Of Hydraulic Transmission. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amir , Fahruroji (2006) A Study Of Square Ring Under Lateral Compression Using Experimental And Finite Element Methods. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amir Aizuddin , Yusoff (2006) A Study Of Surface Integrity Whilst Turning Aisi 1045 Steel With Tic Al203 Coated Tool. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amir Farhan, Maarof (2011) Development Of Car Door Lock Actuator Using Shape Memory Alloy (SMA) Material. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amir Fauzan, Jaafar (2006) Intranet Chat Monitoring Tool Server. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amir Fizal, Amir Razauddin (2015) Analysis On Effect Of Coconut Fibre Towards Impact Characteristics. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amir Hamzah, Muhamad Nasruddin (2018) Fabrication Of Uniaxially Aligned Electrospun Nanofibre Using A Rotating Collector. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amir Hanin , Yazid (2007) Productivity Improvement Using One Piece Flow Techniques : A Study At An Electronic Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amir Hasan, Iskandar (2014) Development Of GSM Based For Car Security System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amir Hussein, Mohd Hanafiah (2017) Industry Monitoring Using GSM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amir Suffian, Norshahri (2008) Radio Frequency Controlled Stairs Climbing Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amir Zaid, Baharudin (2009) Penyerapan Tenaga Oleh Keluli Lembut Di Bawah Hentaman Kuasi-Statik. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amira, Sahari (2012) Time Study Method Implementation At Jecmetal Industries Sdn. Bhd. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amira Emyliana, Zailan (2017) Analyze of process parameter in 19 nm WSi2/TiO2 N-channel MOSFET using statistical modelling. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Amira Sarayati , Ahmad Dahalan (2009) Voice Activated Crib Light. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amira Sariyati, Haji Ayob (2005) OSC Assist System (OAS). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amirah , Jaafar Mad Ariff (2009) Velocity Measurement Of Moving Particle Using Combination Of Laser And Phototransistor. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Amirrul Adha, Sulaiman (2015) Interactive Multimedia System By Using Hand-Gesture Motion Sensor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amirthalingam, Subramaniam (2006) Everything That Moves Alarm. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amiruddin, Husin (2008) A Study On Effectiveness Netwook Monitoring System Software In Local Area Network Environment. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amiruddin, Omar (2012) A Study Of Maintenance Design System For Industrial Pump. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amiruddin , Shahipurullah (2013) Investigation Of Extracting Oil From Waste Palm Fruit Fibre. Project Report. UTeM, Melaka. (Submitted)

Amirul , Sait (2008) Potential Application Of Ferrofluid For Robot Gripping Mechanism. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Amirul Aizat , Mohd Razali (2012) Hybrid Learning Control Schemes With Input Shaping Of A Flexible Manipulator System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amirul Akmal, Abd Rahman (2012) Investigation On The Effect Of Transient Overvoltage On Electrical Cable. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amirul Asyraf, Mat Nasir (2013) Preparation And Characterization Of Green Rubber Foam From Reclaimed Rubber Glove. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amirul Farhan, Mohd Salih (2010) Design A Bending Machine For Bowl Feeder Attachment. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amirul Farhan , Mohd Salih (2010) Design A Bending Machine For Bowl Feeder Attachment. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amirul Fariq, Ramly (2009) Design Of Automatic Gate Powered By Solar Energy. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amirul Nizuan, Mohd Kasbollah (2005) Membina Satu Model Kecil Turbin Dedenyut Bagi Tujuan Pembelajaran Dan Kajian. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amirul Ramzani, Radzid (2015) Removing Al-Quran Illumination. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amirul Rezza, Ishak (2015) Development Of Multiple Wireless Power Transfer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amirul Shafiq, Hsan Baseri (2010) Solar-Powered Electric Bicycle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amirullah , Amran (2013) Bahan api pepejal daripada sisa bahan buangan industri minyak kelapa sawit. Project Report. UTeM, Melaka. (Submitted)

Amirulnozam, Hamidon (2005) To Develop The Production Process Flow Layout For Casting Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amit, Auzai (2017) Design Of Electronic Fuel Injector Tester For Educational Purpose. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amiza, Abu (2010) Monitor And Control Greenhouse Environment. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amjad Saddar , Md. Isa (2013) Pembangunan Sistem Kuasa Penggerak Hibrid Elektrik Untuk Kenderaan Dua Alam UTeM. Project Report. UTeM, Melaka. (Submitted)

Ammar , Mohd Saufian (2007) Roboclip (Pencengkam). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ammar Abdullah, Hussein Al-Hegazi (2015) Material Characterization Using Microwave Resonant Sensor. Project Report. UTeM. (Submitted)

Ammar Alfaiz, Mustaffa Albakri (2011) Design And Fabrication Of A Semi Automatic Gear Shifting Mechanism For UTeM Formula Style Race Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ammer Ezhar, Mohd Razalli (2015) Fatigue Analysis Of Steering Knuckle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amni, Mohamed Zain (2010) Disaster Alert Intelligent System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amran, Yunus (2006) SPM Questions Centralized System With SMS Announcement. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amran, Fatin Afiera (2017) Handwriting Analysis Using IMU For Small Handwriting Size. Technical Report. UTeM, Melaka. (Submitted)

Amran, Mohamad Affendi (2017) Development Of Uninterruptible Power Supply Using Variable Voltage Regulator For Low Power Devices. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Amran, Mohamad Ikhmal (2017) Design,Analyze,Optimize And Fabricate A Bodywork Structure Of Modular Food Truck. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Amran, Mohd Firdaus (2018) Effect Of Electron Beam Radiation On The Dispersion Of Graphene Nanoplatelets In Nylon66 Based Polymer Composites. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Amran, Muhammad Aimman (2017) Design And Development Of Car Alarm System Using SMS Based. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amran, Nur Hazira (2018) The Correlation Between Machinibility And Surface Roughness In CNC Lathe Machining. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amran, Nurul Aini (2016) Design And Development Of Switchable Matched Bandstop To Bandpass Filter Using Ring Resonator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amrik Singh, Phuman Singh (2009) Modeling And Simulation Of 14 DOF Vehicle Dynamics. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amril Az, Mat Yasir (2006) Wireless Bluetooth Digital Oscilloscope. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amrul , Omar (2008) Suspension Geometry Analysis Of Formula Varsity Race Car. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Amrullah Firdaus, Abdul Shukor (2012) Influences Of Transformer Winding To The Performance Of DC AC Inverter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amuthan, Arjunan (2005) Design Of DC-DC Power Supply. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amzah, Mohd Nuralim (2016) Development Of Portable Air Compressor By Using A Battery. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amzar , Mat Yunus (2011) The Study On The Effect Of Faroarm - 3D Laser Scanner In Different Scanning Depth, Scanning Angle And Temperatures Condition. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amzar Azfar, Zolkiflie (2015) Application Of Microfiber Sensor For Determining Olive Oil Concentration. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amzar Hijazi, Shubli (2011) Analysis Of Mechanical Properties Of Inorganic Adhesive Based Composite Using Finite Element Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

An Efendi, Hizrian (2016) Battery Flat Preventer Device Design For Car Based On Bang-Bang Controller Of Current Limiter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

An Nawawi, Ahmad Thamin (2015) Performance Evaluation Of A3 Topology Control In Wireless Sensor Network. Project Report. UTeM. (Submitted)

Anaam, AbdulRahman Taher Ahmed (2017) Study Air Flow Distribution In The Dryer System Through CFD Simulation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Anas, Azmi (2008) Rekabentuk Mixer Untuk Kenderaan Berkuasa Gas. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Anas Imran , Ghazali (2007) An Analysis Of Network Performance At Kementerian Perumahan Dan Kerajaan Tempatan Using Opnet Modeler. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Anas Mujahid, Mohammad Khair (2013) Mechanical Behaviour & Water Absorption Of Metal Matrix Composite (TN+Rice Husk) Fabricated Via Permanent Mould Casting - ( Experiment with 10% And 25% Of Rice Husk). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Anbalagan, Munusamy (2009) Application Of XY Table Continuous Motion Programming With PC Based Control. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Andrew , Arih (2007) Stress And Deformation Analysis On PCB Depaneling. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Andy, Heng Poh Seng (2015) Tracking Performance Of A Hot Air Blower System Using PID Controller With PSO And Harmonic Search Algorithm. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Andy, Low Foo Hwa (2015) Face Recognition Using Principal Component Analysis With Support Vector Machine Classifier. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ang, Ling Yuen (2013) Simulation Of Intelligent PID Temperature Controller. Project Report. UTeM, Melaka. (Submitted)

Ang, Soon Chang (2013) Design And Development Of Tactile Detection By Using RFID Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ang, Chi Yuan (2014) A Study Of Eco-Innovation In Small And Medium Enterprises (SME) Manufacturing : A Case Of Selangor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ang, Kuan Kee (2015) Vehicle Detection And Counting From Unmanned Aerial Vehicle (UAV). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ang, Ruo Li (2016) Potential Study On Wind Turbine Generation By Vehicles Vortex On Highways. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ang, Sei Qi (2010) Develop A Linear Measurement Sensor System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ang, Wei Pin (2015) Energy Adaptive Power Management System Using MPPT Techniques For Energy Scavenging In Mobile And Wireless Devices. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ang, Wei Pin (2016) Energy Adaptive Power Management System Using MPPT Techniques For Energy Scavenging In Mobile And Wireless Devices. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ang Wei, Yih (2012) Data Acquisition System For Solar Panel Monitoring. Project Report. UTeM, Melaka Malaysia. (Submitted)

Anis Niza, Ramani (2013) Design and Analysis Electrical Energy form Clay Soil. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Anis Niza, Ramani (2012) Improvement Of Grounding System For High Voltage Laboratory FKE UTeM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Anis Suhaila, Mohd Zain and Mardiana, Bidin and Niza, Mohd Idris and Siti Khadijah, Idris and Zahariah, Manap (2005) Wireless Temperature Sensor Network. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aniza, Othman and Rosleen, Abd. Samad and Hidayah, Rahmalan and Norasiken, Bakar (2010) Feature Extraction Software Tool (Fest:Colour) Colour Extraction of Images and 3D Visualization of Colour Histogram in Cielab Colour Space. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Anna Marie , Almodiel (2008) Study On Fracture In Low Carbon Steel Using Bend Specimen With And Without Carburizing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Annapoorani, Raman (2012) Laboratory Equipment Tracking System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Anne Siaw Fung, Wong (2006) Self-Powered Distance Detector Using Vibration Based Power Generation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Annuar Hashim, Muhammad Arif (2016) Development Of Building Application Noise Barrier Using Sandwich Structure. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Antasya , Mohd Arif (2006) Analysis Of Different Current Setting In OTC DR 4000 Robot Welding For Mild Steel. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Anuar, 'Izzat Haiman (2009) Intelligent Vehicle Navigation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Anuar, Mohd Sabri (2008) Lecturer Room Director/Message Board. Project Report. UTeM, Melaka Malaysia. (Submitted)

Anuar, Abu Bakar (2017) Fungsi Kebarangkalian Ketumpatan Lekuk Penghampiran Dalam Penilaian Keboleharapan Pengeluaran Sistem Kuasa Hidro. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Anuar, Amanina Zahidah (2016) Development Of Home Appliances Controller Via Phone System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Anuar, Jaafar and Muhammad Noorazlan Shah, Zainudin and Mohd Muzafar, Ismail (2013) Modelling And Analysis Of Bit-Communication Behaviour In Artificial Swarm. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Anuar, Nasri (2017) Foreign Material Detection In Agarwood Using Thermal Imaging Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Anuar, Nurul Husnina (2017) The Effect Of High Frequency Wave In Vibro Acoustic Method For Crack Detection. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Anuar, Siti Zahrah (2016) Modelling And Analysis Of Sensorless Permanent Magnet Synchronous Motor By Using Fundamental Excitation. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Anuar, Siti Zahrah (2016) Modelling And Analysis Of Sensorless Permanent Magnet Synchronous Motor By Using Fundamental Excitation. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Anuar , Muhammad (2006) Study The Wear On High Speed Steel (HSS) Cutting Tool By Variable Parameters Turning Operation. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Anuar , Ngadengon (2008) Design And Development Wireless Camera Controller Using PIC 16F84A. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Anuar , Piji (2007) Modeling And Analysis Of Desmodromic Valve Train. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Anuar , Mohamed Kassim (2011) Research and development on motion control for one legged type hopping robot. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Anuar Falellah , Mohd Nurul (2016) Design Multiband E-Shaped Fractal Microstrip Patch Antenna With Defect Ground Structure (DGS) By Using Graphene. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Anuar Haszuad, Abdul Halim (2008) PC Based Device Switching Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Anuar Jeffry , Rohim (2007) Design And Development Amateur Radio Transmitter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Anuarulnam, Ramli (2013) Counterfeit Banknote Detection & Counting. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Anura, Ahmad Kamil (2015) The Effect Of Dispersion On Optical Fiber. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Anwar, Ruksana (2016) Concept, Design And Implementation Of Solar Powered Smart Waste Bin Management System With Odor Sense. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Anwar Muhibbuddin, Noh (2009) Design And Development Of Inclined Batch Dryer (IBD) System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Anwar Muhibbuddin, Noh (2009) Design And Development Of Inclined Batch Dryer (IBD) System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Anwar Naimi, Arsat (2015) Study On The Properties Of Parts Manufactured Using Fused Deposition Modeling (FDM). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Anwaruddin, Amirah Nadiah (2016) Portable LED Dot Matrix Display Board. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aqilah, Othman@Omar (2006) Two Level Power Car Alarm. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aqmal, Hashim (2013) Remanufacturing Analysis By Using Failure Mode And Effects Analysis (FMEA) For Engine Block. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aqmal Hisyam, Hamzah (2015) Remotely Operated Contruction Robot Tele-Operation Command And Control System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Arbaeyah, Abdul Razak (2013) Optical Solitons Simulation In Single Mode Optical Fiber Over 40GB/S. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ardika Ridal, Awang (2013) The investigation of turbo generator on exhaust manifold in spark ignition engine. Project Report. UTeM, Melaka. (Submitted)

Arfah, Saaid (2005) Pembangunan Alat Electropalatograf. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Arfah , Ariffin (2009) Wheelchair Movement Control System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Argenan, Kugan (2017) Development Of A Simple Robot With Human-Robot Interaction (HRI) Features. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Arham, Nurul Famyza (2016) Integrated Microwave Bandpass And Bandstop Filter To Multifunction Operation In Wireless Communication System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Arham Mustaqeem, Ismail (2015) Performance Analysis Of Cascaded Optical Amplifier With Different Loop Length. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aribbin, Mohd Nazifi (2009) Study On Noise Level From The Effect Of CNG Tank Installation In Vehicles. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Arief, Mostapah (2013) Design Of S-band Microstrip Bandpass Filter For S-Band Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Arief Ezmee , Jumodi (2008) Infrared Detector. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Arieff Ridzwan, Yussuff (2011) Synthetic Hybrid Laminate Composite Using Recycled Plastic Bag For Hardboard Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Arif, Ahmad (2010) Numerical Prediction Of Solid Waste Combustion In An Updraft Gasifier. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Arif Affendi , Che Hamid (2011) Multiplayer Networked Game Over LAN And Quality Of Service Issues. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Arif Hadafie, Idris (2005) Kawalan Peralatan elektrik Berasaskan Mikro Pengawal Menggunakan Isyarat DTMF. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ariff, Idris (2011) E-Maintenance System Based On Condition Monitoring : An Approach To Real Time Sensor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ariff, Afif (2015) Development Of Wind Turbine Generator Trainer Set Using PIC System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ariffin, Ab Razak (2016) HVAC Monitoring (Temperature) And Controlling (Valve/Damper) System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ariffin, Nur Amelia (2017) Development Of Small Energy Generation From Vehicle Movement. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ariffin , Hashim (2007) Research On Mechanical System Used In Oil And Gas Industry (Research And Improve Mechanical Seal). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ariffin @ Mohd Saufi, Mohamad Assif (2016) Optimization Performance Of Fiber Optic Sensor On Fully Synthetic Test Oil For Engine Traditionally Purpose. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Arifin, Afiqah (2014) Customer Acceptance On Espring Water Treatment System In Southern Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Arika, Aris (2005) Development Of Electronic Machanical Design System (E-MechSys) For Consultancy Services : Plumbing And Sanitary Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Arina , Zakaria (2010) Study On Shock-Absorbing Properties Of Square Tube Strengthening Structure. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Arisita Duwi, Sapit (2010) Design Of Power Amplifier For Radio Over Fiber Technology (ROF). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ariston Shah, Azmeer Shah (2017) Performance Analysis Of Industrial Robot Under Loaded Conditions And Various Distances. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Arman Shah, Abdullah (2009) Design Of Timing Chain Cover Assembly Jigs. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Arshad, Munirah (2015) Sleeping Sensoring And Alerting Devices For Drivers. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Arumugam, Sativelo (2008) Automated QA Inspections Using Vision Sensor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Asaari , Mohd Muji (2007) CS-8 Humanoid Robot (Body). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Asbullah, Sukri (2007) Hardware Development Of Mixture Drinks Dispenser. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aseri, Nur Amanina Syazwani (2018) A Study On The Effect Of Physical, Mechanical And, Morphological Properties Of Pineapple Leaf Fiber Reinforce Cornstarch Biodegradable Plastic Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Asfaezuddin , Zakaria (2009) Analisa Perpindahan Data Model Surface Di Antara Platfom CAD Yang Berbeza. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ashaari, Nur E'zatty Ashiqin (2017) The Effect Of Physiological And Physical Experimental Factors In Aerospace Industry. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ashafi'e , Mustafa (2013) Tribological properties of nanoparticles as lubricating oil additives. Project Report. UTeM, Melaka. (Submitted)

Ashok, Rajandran (2011) Interfacing Of Microcontroller To Circulator Using Embedded C Programming In Development Of Fiber Optic Surface Roughness Measurement Using Time Of Flight. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ashrol, Sarip@Shariff (2005) Development Of Uninterruptible Power Supply (UPS). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Asir, Nor Farhana (2017) Thumbprint Automatic Attendance System & Door Access By Using GSM. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Aslah, Mohd Zaim Afiq (2017) A Study Of Future Of Manufacturing In The Context Of Developing Countries. Project Report. UTeM, Melaka. (Submitted)

Asleeda , Ahmad (2008) Six Sigma (DMAIC) Implementation In Industry. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Asmah , Ahmad (2007) Develop Hardware For Automatic Baby Milk Mixer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Asmai, Siti Azirah and Abal Abas, Zuraida and Hasan Basari, Abd Samad and Abdul Rahman, Ahmad Fadzli Nizam (2005) Design And Development Of Palm Oil Mill Maintenance Management System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Asmawi , Hidayatul Syakira (2015) Design And Development Of Miniature Size Automatic Storage And Retrieval System (ASRS). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Asmida, Asri (2015) Pigeon Hole Smart Box For University Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Asniza , Muhidin (2007) Automated Juice Mixer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Asok Max , Subramaniam (2013) Active Suspension Control Of Ground Vehicle Heave And Pitch Motion. Project Report. UTeM, Melaka. (Submitted)

Asraf Ali, Muhammad Saiful (2016) Development Of Classroom Noise Detector Using Arduino. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Asreen Anuar , Abd Aziz (2007) Design A UWB Amplifier Based On CSSDA For UWB Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Asri, Muhamad Zhariff (2017) Development Of Elementary School Drone Kit Using Arduino. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Asri Khalid, Mohd Subari (2014) 3D Reconstruction Image Using Single Low Resolution Web Camera. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Asru Rozimin , Abu Bakar (2007) Programming And Interfacing Master Slave (Parent-Child) Robot For Painting Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Asrul Izwan , Mohd Salleh (2007) Roboclimb (Body And Traverse). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Asyraf, Amir (2011) The Development Of Adaptive Lighting System For Motorcycles. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Asyraf , Abd Razak (2012) Energy Efficient Of Automatic Ceiling Fan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Asyraf Taqiuddin, Ahmat Tahir (2012) Curve Tracer Using Microcontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Atifa Faaidha, Munauwer (2012) Development Of Prototype Neutral-Less Time Lag Power Switch. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Atiqah , Abdul Wahab (2011) QoS Of Live Video Streaming Over IPV4 IPV6. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aun, Khor Yong (2008) Analysis Of Data Exchange In CAD. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aurther , Chow Zha Khang (2011) Wideband SPDT Switch For Rf Applications. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aw, Fang Li (2011) Self-Monitoring Traffic Light System For T-Junction Or Multiple Junctions. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Awaludin, Arif Nazmi (2009) Lecturers Students Friendly Attendance Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Awang, Nurul Nadiah (2017) Investigation Of Friction Characteristics Of SAE 15 W40 Conventional Engine Oil With Nano Additive. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Awang @ Rozalli, Ahmad Sofwan (2016) Design Of Ultimate Shield For Fire Fighting Purpose. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Awang Man, Karimah (2008) Car Park Gate Control System Using PIC Microcontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Awang Mu'Awaludin, Ahat (2006) Computer Aided Education For Control Systems: Pid Controller Design Of Closed-Loop Systems. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Awang Muhammad Mursyidin, Ahat (2009) Control Of A Real Inverted Pendulum Using PID Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Awang Zawawi, Dayang Ezzatul (2017) Bandwidth Enhancement Of Multiband Microstrip Patch Antenna For Wimax Application. Project Report. UTeM, Melaka. (Submitted)

Awangku Mohd Hazmin , Awang Zainal (2010) Study Of The Effect Of Variable Speed Fan On The Radiator Cooling System. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Ayeob, Mohd Azizi (2017) Comparison DC And AC Of Inclined Plane Test (IPT) For Tracking And Erosion Of Insulating Material. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ayob, Muhammad Amirul Shafiq (2016) Experimental Investigation Of Front Sprocket Failure Of Fixed Bicycle Using Acoustic Emission And Vibration Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ayob, Muhammed Syameel (2017) Parameter-Properties Relationship Of Thin Plate Welding By Coldarc Technology. Project Report. UTeM, Melaka. (Submitted)

Ayop Azmi, Faiz Aswad (2017) Improve Of Design And Analysis Of Hydraulic House Fence Opening Using Tap Water Pressure. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ayu Fateha, Abdul Hamid (2015) Lean Manufacturing At Manufacturing Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ayub, Asyraf (2016) Study On The Use Of Statistical Approach To Assess Environmental Noise Pollution From Batu Berendam Industrial Estate Melaka. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ayub, Nurhan (2017) Investigation Vehicle Cabin Noise Using Arduino Data Logger. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ayuni Hamizah, Abdul Rahman (2011) Performance Analysis Of IPv4 To IPv6 Tunneling Mechanisms. Project Report. UTeM, Melaka. (Submitted)

Ayuob Sultan Saif, Alnadhari (2017) Effect Of Foil Width In Magnetostrictive Transducer On The Excited Longitudinal Wave In Pipe. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Azahar, Muhd Afif Fikri (2016) Improvement Of Radial Distribution Network With Distributed Generation (DG) By Using Improved Genetic Algorithm (IGA). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azahar, Muhd Afif Fikri (2016) Improvement Of Radial Distribution Network With Distributed Generation (DG) By Using Improved Genetic Algorithm (IGA). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azahari, Salleh and Abd Shukur, Ja'far and Mohamad Zoinol Abidin, Abd. Aziz and Zulkifli, Shariff (2010) RF Front End Design Of Radio Access Point For Radio Over Fiber Technology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azahari, Salleh and Abd Shukur, Ja’far and Mohamad Zoinol Abidin, Abd. Aziz and Zulkifli, Shariff (2010) Reconfigurable Beamforming Network By Using Passive Phase Shifter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azahari, Salleh and Mohamad Harris, Misran and Nik Azran, Ab. Hadi (2011) Design Of Power Amplifier At 5.2 GHz For Radio Over Fiber Technology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azaimmy , Maksid (2009) Kajian Kegagalan Statik Dan Lengkokan Ke Atas Menara Penghantaran Elektrik Dan Kaedah Analisis Unsur Terhingga Menggunakan Perisian Berkomputer MSC/NASTRAN-PATRAN. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azali Firdaus, Mohd Yusoff (2011) Traffic Light For Construction Safety System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azam, Muhammad Firdaus (2016) Fingerprint Attendance With GSM Module. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azam , Ahmad (2006) The Development Of A Hydraulic Flow Meter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azan, Amar Shafiq (2016) Development Of An Automated Helmet Dryer Using Arduino. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azan Hariz , Ab Latif (2010) Nonlinear Controller For Gantry Crane Based On Partial Feedback Linearization. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azane Azran, Mohd Latif (2006) A Study On The Annealing Process Of Aluminium Bronze Alloy Based On Their Microstructure Growth And Mechanical Properties. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azdiana , Md Yusop and Noor Asyikin, Sulaiman and Roseliza, Yatim and Siti Halma, Johari (2011) An Adaptive Input Shaping Scheme For Vibration-free Positioning Of A Gantry Crane System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azdiana , Md Yusop and Noor Asyikin, Sulaiman and Roseliza, Yatim and Siti Halma, Johari (2011) An Adaptive Input Shaping Scheme For Vibration-free Positioning Of A Gantry Crane System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azelan, Aimi Nur Atirah (2014) Research And Development (R&D) Management And Its Impact On Firm Performance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azemi, Muhammad Zikri Hakim (2017) Kajian Mengenai Minyak Biji Sesawi Sebagai Bahan Api Alternatif Untuk Enjin Diesel Satu Silinder. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azemin, Masyhadi (2016) Design And Analysis Of Optimum Clearance Of An Open Small Thimble Blanking Die. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azfar Nazmi , Nikmatlah (2010) Validation Of Bar Vibration By Using FEA. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azhar, Anuar (2015) Penyiasatan Perambatan Gelombang Akustik Terhadap Lapisan Konkrit Struktur Bertetulang. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azhar, Mohamad Amin Ariff (2015) Design, Install And Monitor Of Hydronic Radiant Cooling System In An Enclosed Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azhar, Mohamad Azrul Nizar (2017) Ferroresonance Mitigation Method Using Active Filter In Voltage Transformer (VT). Technical Report. UTeM, Melaka. (Submitted)

Azhar , Ahmad (2010) Optimization Of Coil And Permanent Magnet Of Linear Oscillatory Actuator For High Thrust Performance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azhari, Keliwan (2005) Noise Detector And Motion Sensor Surveillance System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azhari, Keliwan (2005) Noise Detector And Motion Sensor Surveillance System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azhari, Nur Afifiah (2015) Preliminary Study Of The Availability Of The Using Gear Lube Oil Based On Local Palm Oil For Transmission Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azharuddin, Soher (2011) Deployment Of Indoor Test-Bed Deployment For Wireless Mesh Network Using D-Links Router. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aziah, Khamis and Intan Azmira, Abdul Razak and Azhan, Abdul Rahman and Nur Hakimah, Ab. Aziz and Hyreil Anuar, Kasdirin and Kyairul Azmi, Baharin (2010) Design and Development of Solar Power Mover. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azian Kamaruddin, Rabiatul Adawiyah (2016) Design And Development Of Radial Line Slot Array Antenna At 28.00 GHZ. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azianashima Heedayu, Zainal (2009) New Design Using Fiber Glass Composite (FRPC) For Jimny Back Door. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azidzin, Mohd. Ridzaudzin (2009) In Campus Communication system Using Optical Principle And Techniques (Reciever). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azie Noor Marlia, Ruslan (2015) Design Analysis Of A Baby Stroller By Using Design For Manufacturing And Assembly Method (Boothroyd Dewhurst). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azilah, Harun (2011) Staff Attendance System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azilah, Mohamed Yunos (2011) Animated Digital Comic In 2D : Maiden's Last Dance. Project Report. UTeM, Melaka. (Submitted)

Azim Fauza , Md Khair (2008) Develop A Motor Speed System Using An Infrared Sensor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azimi, Ab. Rashid (2011) Ergonomics Assessment Of Sheet Metal Cutters. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azimidon, Nurul Balqish (2016) Android Monitoring System For Home Security Using Raspberry PI. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azinuddin Akmal, Abdul Aziz (2010) Design And Development Of An Automated Sorting System In Manufacturing Industries. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azira, Abd Rahman (2009) Smart Room. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azis, Ahmad Faizal (2016) Incorporating Flywheel Hybrid Module In Automobile : Simulation And Analysis Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azis, Nurul Atikah (2015) Study Of Coating Properties For Aircraft Aluminum Alloy Substrate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aziz, Ahmad Zuhairi (2016) Contribution Of Lightweight Materials To The Design And Manufacturing Of An Electric Vehicle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aziz, Azrull (2016) Monitoring And Determination Of The Appropriate Equivalent Cylinder Radius For Axially Compressed Steel Cone. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aziz, Iza Nuriza (2016) FPGA-Based Arduino Architecture Implementation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aziz, Khairul Azha A (2011) Real-time face recognition system using radial basis function neural networks. Project Report. Universiti Teknikal Malaysia Melaka. (Submitted)

Aziz, Muhammad Fikri (2017) Real Time Video Processing For Drone-Based Lightning Sensor. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Aziz, Muhammad Haziq (2016) Incorporating Flywheel Hybrid Module In Motorcycle : Simulation And Analysis Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aziz, Muhammad Najib (2015) Design Of Chilled Floor System For Cooling In Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aziz, Nor Azimah (2018) Effect Of Heat Treatment On Mechanical Properties Of Equal Channel Angular Pressing (ECAP) Processed A356 Aluminium Alloy. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azizah, Shaaban (2008) Fabrication and evaluation of magnetic ceramics. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azizan, Aniza Nazirah (2018) Time Study And Work Measurement Implementation In Manufacturing Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azizan, Mu'az (2016) Development Of Hydroelectric Generator By Using Piping System In Emergency Situation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azizan, Noor'ain (2016) Strength Analysis Of IC Package Through The Impact Of Dynamic Load. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azizan Firdaus, Mohamad (2007) Kawalan Frekuensi Lampau Lebih Dan Kurang Pada Model Turbin Gas Menggunakan Pengawal Tambahan Logik Fuzzi. Project Report. UTeM, Melaka. (Submitted)

Azizi, Adnan (2005) Design And Fabrication Of Test Jig For Motorcycle Suspension Performance Test. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azizi , Kamaruddin (2007) Design And Development Path Finding Robot Using Line Tracking. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azizon, Abdul Aziz (2006) Muslim's E-Planner Website. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azizuddin, Abdul Aziz (2009) Kekuatan Gentian Kaca Berlamina. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azizul , Ahmad (2008) Integrated Filling And Capping System In Bottling Operation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azizul , Mokhtar (2007) Line Balancing And Optimization For Single Model Assembly Line At A Small Medium Industry (SMI). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azizul Hakim, Kamardin (2015) The Effect Of Piston Head On The Performance Of Engine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azizul Hakim, Noor Zubairi (2015) Portable Power Generator From Renewable Energy. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azizul Hakim , Mohamud (2009) Investigation On Relationship Between Ultrasound Faults With Hot Spots On Incoming Cable At Distribution Transformer. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Azizul Halim, Abd Rahman (2010) Fiber Optic Based Line Following Mobile Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azizul Hilmi , Ahmad (2008) Topology Optimization In Automotive Bumper Beam Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azlan, Abu Samah (2009) Modeling Distance Protection. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azlan, Mohamad (2008) Analisis Pengangkat Galah (Pole Lifter Analysis). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azlan, Muhammad Fitri Aiman (2017) Investigation On Tool Paths Programming Strategies Using CATIA V5 To Fabricate Biomedical Application On Simultaneous Five-Axis CNC Milling Machine. Project Report. UTeM, Melaka. (Submitted)

Azlan, Surahman (2015) Friction Analysis Of Common Engine Lubricant In The Market For UTeM Formula Varsity Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azlan , Othman (2006) Development Of Low Cost MRP Software For A Manufacturing Process. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Azlan Kamil , Mohammad Fauzy (2006) Self Oscillating Dimmable Electronic Ballast. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azlan Soffian, Borhan (2015) Estimate The Life Cycle Of Roller By Experiment And Simulation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azli, Muhammad Asyraf (2017) Numerical Solution Of Nanofluids Flow And Heat Transfer Over A Moving Surface With Thermal Radiation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azli, Siti Nurazeera (2017) The Effect Of Number Of Blades On Compressor Cascade Bladesperformance By Using 3D CFD. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azli Imran , Alias (2008) Robot Mudah Alih Kawalan Motor Servo RC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azlilawati , Ishak (2008) Vehicle Protection System From Water Flooding. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Azlina, Abdul Latip (2008) WLAN Low Noise Amplifier Using HBT Technology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azlina, Basharudin (2011) Smart Incubator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azlinda, Mohamad (2013) Optimization Of Injector Gun Design Using Design For Manufacturing And Assembly (DFMA) At The Conceptual Design Stage. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azlinda, Mohd Nor (2008) Flame Imaging Using Ultrasonic Based Tomography. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azly, Nur Hidayah (2017) Influence Of Chemical Modification On Energy Absorption Of Starch Modified Natural Rubber Based Composites. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azman, Mat Sari (2011) Design And Development Of An Automatic Bicycle. Project Report. UTeM, Melaka Malaysia. (Submitted)

Azman, Mohd Talib (2005) Design For Environment In Electronic Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azman, Amierul Syazrul Azril (2018) Real-Time Modelling And Implementation Of A Flood Observatory System (FOS) On IoT Platform. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azman, Hamzah (2007) XY Palletizing Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azman, Mohamad Al-Bukhari (2016) Mobile Phone Charger Design Using Telephone Line Based On Bang-Bang Control Of Buck Converter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azman, Mohammad Nur Shafiq (2017) Development Of Light Pneumatic Artificial Muscle (PAM) For Positioning Task. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azman, Mohd Arshad (2017) Development Of An Electronic Board That Identify And Check The Functionality Of The Commonly Used Arduino's Component (Assorted Component Checker). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azman, Muhamad Azri (2016) Design Of Backup System For Solar-Powered Air Conditioning By Using Condensed And Evaporated Accumulator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azman, Muhamad Nurikhmal (2018) The Performance Evaluation Of Real Time Fire Alert System Based On Internet Of Things (IoT). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azman, Muhammad Faiz (2017) The Influence Of Refrigerant Charging For Non-Ducted Split Unit 1 Horsepower Air Conditioning System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azman, Muhammad Najmi (2017) Bees Algorithm Hybrid With Hooke Method. Project Report. UTeM, Melaka. (Submitted)

Azman, Nor Azatul Fasya (2017) Elimination Of Product Shortage At Dispatch Line In Manufacturing Industry By Using Lean Tool. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azman, Nur Azziana Afifie (2016) Concept, Design And Implementation Of Solar Powered Smart Waste Bin Management System With Level Sense. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azman, Nurfidhah (2018) Investigation And Development Of A Data Acquisition System For Blood Bank. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azman, Nurul Azliyana (2016) Development Of Public Transportation (Bus) Notification Using PIC Microcontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azman, Rashid Sidek (2016) Development Of Arduino Based Secret Door Knocking Pattern Detector. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azman, Syarmine Afiqah (2018) Investigation Of Welding Parameters Effect On Welding Distortion Of Conventional Gas Metal Arc Welding (GMAW) And Cold Arc. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azman, Yuhanis Aqilah (2017) Preliminary Study On The Effect Of Spray Coatings Parameter On Hydrophobic Coating Surfaces. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azman , Amiruddin (2008) Control Of Ball And Beam: Comparison Between Lead/Lag Compensator And State Feedback Controller (SFC). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azman , Ismail (2009) Simulation And Experimental Investigation On A Pneumatically Actuated Active Suspension System Using Gain Scheduling PI Control. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azman Hafiz, Hj Abd Majid (2006) Analysis And Optimization Of Heat Recovery System For Process Plant. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azme, Amirul Fikri (2018) Analysis On Different Length Of Sensor Area Towards The Performance Of Fiber Optic Sensor For Refractive Index Measurement. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azmeer Zakki , Mohd Harith (2009) Robot Dance Using 68000 Microprocessor Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azmi, Awang Md Isa and Zahriladha, Zakaria and Fauzi, Mohd Johar (2007) In-Flight Prayer Times And Qiblat Direction Using GPS. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azmi, Mohamed (2006) 3D Advertisement Info 'Visit Malaysia Year 2007'. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azmi, Mohd Fairus Firdaus (2012) Flow Modelling Of Nasal Cavity With Various Flow Rate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azmi, Azrull Fazren (2016) Grounding Monitoring System For Retaining The Property Of Grounding Protection. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azmi, Azuwar (2017) Experimental Study On The Effect Of Vortex Generator To Aerodynamics Performance Of Aerofoil. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azmi, Husna 'Izzati (2017) Design And Development Of Wireless Barking Intruder Alarm For IoT Home Security System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azmi, Muhamad Sahrul Izwan (2017) Active Suspension System Using Stability Augmentation System For Passenger Vehicle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azmi, Muhammad Aliff Isyraq (2017) Comfort Parameters Tuning For Vehicle Suspension Pitch Motion. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azmi, Muhammad Zaim (2018) Effect Of Type Of Substrates To Conductive Ink Under Thermal Performance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azmi, Norsyafiq Amirulamry (2017) Effect Of Citrate Bath Composition And Heat Treatment Process On The Properties Of Electrodeposited Nickel-Fly Ash (Ni FA) Composite Coating On Aluminium Alloy 7075 Substrate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azmi, Nur Amirah Ilyana (2018) Performance Analysis Of VHF Interferometer Between Original And Filtered Signals Based On Signal Processing Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azmi, Nur Suraya Amirah (2018) Design And Investigation Of Wideband Antenna For In-Building Wireless Communication. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azmi, Nurul Amielia Hidayah (2016) Development Of Anti-Theft Surveillance System With Cloud Based Pictures Storage By Using Image Processing Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azmi Ali, Muhammad Hanis (2016) Comparative Study On The Different Range Of NIR Sensor Measurement For Glucose Concentration. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azmida , Abd Aziz (2006) Redundancy Of Load Balancing For Websites. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Azmin, Ahmad Faris (2016) Human Robot Interaction (HRI) Using Simple, Interactive Robots. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azmin , Ahmad (2010) The Effect Of Thermoelectric Power Generator (TEG) Based Hi-Z Thermoelectric Modules On The Performance Of 1.3L 4G13 Wira Engine. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Azmir, Mat Zain (2010) Design Of MR Fluid Base Brake System For Motorcycle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azmir, Abu Samah (2010) Optimization Of Louvered Plate Angle Using CFD Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azmira, Ahmad (2015) Investigation Of Impact Ionization Of Photodiode Using The Lucky Drift Theory. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azra Suzzana , Wahab (2008) Stock And Inventory Control System Using Radio Frequency Identification (RFID). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azrai, Muhammad (2010) Programming Of An Automated Pick And Place Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azri, Mukhtar (2011) Analyzing Of Http and Https Protocol And Comparison Using Packet Sniffer Tools On Three Operating Systems. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azri Safwan, Abdul Halim (2011) The Effects Of Metal Inert Gas (MIG) Process Condition On Hardness Of Stainless Steel Claddings Of A Carbon Steel Substrate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azril, Othman (2005) Design And Fabricate An Open-Circuit Miniatute Sized Wind Tunnel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azril Shafizam, Mohamad (2015) Experimental Investigation Of Engine Performance And Emission For Biodiesel At Various Storage Condition. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azrin , Maharani (2008) Design And Model Making Of Hemming Jig For Car Door Assembly. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azrin , Mohamad Effandy (2007) The Improvement And Fabrication Of New Breather Valve For Oil And Gas Industry. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Azrina, Abdul Halim (2013) Process Of Abrasive Grinding Computer Numerical Control (CNC) Machine To Grind Tooling And Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azrina, Mastor (2007) Sistem Kawalan Automatik Menggunakan Penggesan Ultrasonik. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azrul, Aziz (2006) Ergonomic Aspects Of Design Functional Cart. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azrul , Jasni (2007) Portable Cocoa Bunch Wrapping Device. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azrul Affendi, Atan (2010) Design Optimization Of A Boiler Furnace. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azrul Hafez , Mohamad (2013) Study Of Design And Fabricate Driving Simulator. Project Report. UTeM, Melaka. (Submitted)

Azrul Hiza , Muhamad Azraai (2007) Rekabentuk Kipas Penyejuk Segar. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azuan , Abdul Aziz (2008) Optoelectronic PH Meter With Display. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Azuraini, Muda (2007) Membangunkan Sistem Perisian Untuk Kawalan Litar Elektrik Menggunakan Suara. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azwan , Baharudin (2010) The Analysis Of Current Carrying Capacity Of PCB. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azwarni, Mohamad (2009) Effective Implementation Of Process Capability Index Cpk In Minimizing Reject Rate For Batch Production. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azzad Firdaus, Zolkepli (2008) Electronic Combination Lock Using PIC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

B

B. Mohd Saipudin, Muhammad Afiq (2017) Soil Condition Sensor Development And Wireless Monitoring Using ESPresso. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Baba Noor, Nuratiqah (2012) Natural Convective Heat Transfer In Square Enclosure With Partition On Top Wall. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Bachok, Muhammad Yusuf Khatir (2014) Passenger Satisfaction On Information Towards The ITS Components Of Rapid Kuantan Bus Service. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Badeli, Siti Yuhainiazwa (2016) Applying Process Failure Mode And Effect Analysis (PFMEA) Approach By Using DMAIC To Improve Product Quality Performance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Badrolhisam , Jaafar (2007) Analisis Pembetulan Faktor Kuasa Menggunakan Kapasitor Statik. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Badrul Amri, Abdul Rahman (2006) Merekabentuk Konsep Dan Model Jek Kereta (Alat Bantu Kecemasan) Jenis Mekanikal. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Badrul Hisham, Ahmad (2013) Design Of Switchable Matched Bandstop Filter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Badrul Hisham, Ahmad (2012) Pin Diode With Dumbbell Shape Of Defected Ground Structure. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Badrul Hisham, Ahmad and Redzuan, Abdul Manap and Noor Azwan, Shairi (2011) Design And Development Of Rectangular Waveguide Bandpass Filter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Badrul Hisham, Ahmad and Mohd Nor, Husain and Kim See, Tan and Zulkifli, Shariff and Noor Azwan, Shairi (2011) Design And Development Of Substrate Integrated Waveguide Bandpass Filter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Badrulhisham, Mohammad Zulkhairi (2016) Adjustable Power Monitoring System (APMS) For Daily Usage. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Badrulzaman Khan, Elyssa Elnna (2018) Investigation On The Tribological And Hardness Properties Of Nickel-Quarry Dust Composite Coating Prepared By Various Surfactant Contents. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Bagas, Wardono (2009) Advance Machining of Industrial Graphite Electrodes. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Bagas, Wardono and Sivarao, Subramonian (2008) Quality And Performance Analysis Of Laser Machining. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Bahari, Norhazilina (2007) Insulated-Gate Bipolar Transistor (IGBT) Inverter With Vector Modulation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Bahari, Mohamad Aizat (2016) Analysis Of Fin And Hole Effect Towards Air Velocity And Energy Absorption During Impact Test For Bicycle Helmet. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Baharom, Mohamad Faizal (2009) Time And Current Grading For IDMT Relay Setting. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Baharom, Mohamad Faizal and Sulaima, Mohamad Fani and Mohd Dahalan, Wardiah and Abdul Kadir, Aida Fazliana and Bohari, Zul Hasrizal and Napis, Nur Faziera (2017) A Fundamental Study Of Distributed Generation Sizing And Allocation Simultaneously By Using Improved Evolutionary Swarm Particle Optimization (IEPSO) For Loss Minimization. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Baharudin, Muhammad Dhiauddin (2016) Quasi-Static And Dynamic Compression Behaviours Of Biocomposites. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Baharudin, Zikri Abadi and Ab Ghani, Mohd Ruddin and Mat Hanafiah, Mohd Ariff and Zainon, Maslan and Abdul Rahman, Ahmad Idil and Din, Asri (2014) A New Lightning Flashes Characterization Technique For Lightning Detection System Using Internet-Scale Pattern Recognition Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Bahran, Ali Izzuddin (2016) Identification And Parameter Estimation Of Multifunctional Prosthetic Hand. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Bahran, Ali Izzuddin (2016) Identification And Parameter Estimation Of Multifunctional Prosthetic Hand. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Bahri, Mohd Abu Zar (2016) Development Of Magnetorheological Damper Test Rig Machine For Automotive Suspension. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Baizura, Baharin (2006) Electronic Watchdog. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Balai, Lorita Lawi (2016) A Study To Propose Solution On Palm Oil Mill Screw Press Machine Breakdown Using QC Tools. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Balan, Kavina Nishanthini (2018) Design And Development Of Material Characterization Using Microwave Signal. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ban , Shu Wen (2008) Smart Kart. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Bapokutty, Omar and Dhar Malingam, Sivakumar and Rivai, Ahmad and Subramonian, Sivarao and Selamat, Mohd Zulkefli (2018) Fabrication Towards Mechanical Properties Of Aluminium-Kenaf Fibre Reinforced Hybrid As Biodegradable Light Weight Composite Material. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Basaruddin, Nur Asheera (2017) Design, Development And Of Microstrip Antenna For Short Range Communication. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Baskaran, Ashvinaa (2017) Design And Development Of RFID Metal-Based Items Tracking System For Automotive Manufacturing Plant. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Basrey, Zafirah (2017) Bandwidth Enhancement Of Reconfigurable Planar Inverted-F Antenna (PIFA) For GPS Band Application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Basri, Siti Nur Athirah (2018) Improvement Of Building And Facilities Maintenance Performance : Satisfaction Of Occupants And Users. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Bazli Faiq, Zaini (2015) Evaluating Risk Factors In Manual Material Handling Tasks (Lifting And Lowering). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Bazlina , Basarahim (2006) Network Cable Tester With LCD Display. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Bebe Sabrina , Abdullah (2005) Transmission Line Models For Coordination Of Surge Protective Devices. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Bee, Shei Er (2017) Design And Development Of An Ultra-Low Power CMOS Voltage Regulator. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Beh, Teik Siong (2007) LED Bending Machine Fixture. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Beh, Eik Zhen (2017) Introductory Of Dimple To Ahmed Body Top Surface As A Drag Reduction Device By Using DoE Appraoches. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Benny Doimin , Mohd Zamlan (2007) Switching Mode Power Supply Using Buck-Boost Converter-Continous Mode. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Bidzani, Norshamimi Diana (2016) The Planning Of Handover In 4G Technology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Birang, Katerina (2016) Formation Of Cobalt Doped Zinc Oxide Photocatalyst For Synthetic Methyl Orange Degradation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Blangkat , Ahmad Basimin (2006) Self-Sustaining Solar Powered Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Bok , Chiew Loon (2010) Emission Characteristic Of Alkaline-Catalysts Biodiesel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Bong , Kuan Fung (2009) Engineering Design Analysis On 5 Kg Payload Gripper For Comao Robot. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Bong , Siaw Wee (2008) Vibration-Free Positioning Of A Gantry Crane System With Inverse Dynamic Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Boo, Jia Min (2018) Development Of New Standard Operation Procedure Configuration For Disassembly Work. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Boon, Kah Seng (2012) A Prototype Of An Intelligent Lighting Control System Powered Via Photovoltaic Technologies. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Borhan, Luqman Hakim (2017) The Effect Of Number Of Blades On Turbine Cascade Blade Performance By Using 3D CFD. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Borhannodin, Nurul Nadiah (2016) Blood Glucose Detection Using GSR Sensor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Bubin, Rabiah Aduwiyah (2016) Factors To Enhance Productivity By Utilising Waste Management In Malacca Manufacturing SMEs. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Bunyamin, Yahaya (2006) Cooling Tower In Steam Power Plant: Its Performance Regarding The Flow Rate Control And Water Make Up Control. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Burhanuddin, Mohd Aboobaider and Mohammad Ishak, Desa and Zeratul Izzah, Mohd Yusoh and Sazalinsyah, Razali (2007) Rekabentuk Dan Pembangunan Sistem Penyelenggaraan Mesin Kilang Pemprosesan Makanan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Buyong, Zulhafiz (2016) Conveyor Speed Control Application Based On PID Control Algorithm. Project Report. UTeM, Melaka, Malaysia. (Submitted)

C

C. Chemban, Swarna Latha (2017) Implantable In Body Antenna Design At Medical Implant Communication Service Band For Telemedicine Application. Project Report. UTeM, Melaka. (Submitted)

C. Prem Anand, Chandia Sekhara (2011) Low Maintenance Aquarium - Automatic Controller System For Water Level Sensor, Temperature And Food Dispenser System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Carla Regina, Yaling (2015) Design And Simulation Of Go-Kart Active Rear Spoiler Air Foil Shape Using Computational Fluid Dynamics (CFD) Simulation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Carvyn, Blaise (2015) A Fibre Optic Sensor On Acetone Concentration Detection Using Beam-Through Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Cassandra, Leong Chai Ee (2015) Development Of PIC Based Safety Vehicle System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Catherine Foo , Wei Li (2007) The Development Of Malay - English Bilingual Mobile Dictionary For Java Mobile Phone. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Catherine Muna , George Malang (2009) High Frequency Electronic Ballast Protection. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Ch'ng, Choo Waey (2011) Optimizing Nymber Of Booths : Case Study At Post Office. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ch'ng, Yau Yau (2015) Online Face Recognition System Using Artificial Neural Network. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chah, Gan Peng (2005) Utilization Of Empty Fruit Bunches As A Combustion Fuel To Generate Steam. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chahit, Dyana (2017) Effect Of Different Pyrolysis And Annealing Temperature On Structural And Electrical Properties Of K0.5Na0.5(NbO)3 Thin Film. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chai, Chi Kong (2005) Study On The Application Of Variable Speed Drive To Achieve Cost - Effective Electricity Saving. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chai, Jiuan Hua (2008) Design And Development Of Plastic Injection Mould With Concurrent Engineering. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chai, Agatha Yan Hong (2017) Improving Inventory Management Using Open Source Software Enterprise Resource Planning (OSS/ERP). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chai, Fong Ling (2017) Validation Of Kinect-RULA System For Workstations Assessment. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chai, Yong Pin (2011) Propagation Coverage Using Ray-Tracing Technique (For Outdoor Scenarios). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chai, Ze Qin (2016) Wireless Home Switch Using Arduino UNO. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chai , Sen Shin (2011) Performance Evaluation Of Hybrid Raman And Erbium Doped Fiber Amplifiers (HFAs). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chairulsyah, Abdul Wasli and Abdul Rani, Othman (2008) 58 GHz power amplifier, a development amplifier using microstrip technology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chakravarthy Gopala Krishna, Kaliappan (2005) Semi Auto Filling Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chan, Hong Ket (2010) Study Of Internal Heat Exchanger Effects On Car Air Conditioning System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chan, Horng Tat (2010) Study On Haar Classsifier For Machine Learning System That Can Detect Specified Object In Vision System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chan, Seng Kiong (2008) Line Detecting Mobile Robot For Delivering And Receiving Loads To Different Set Points. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chan, Siew Yien (2011) A Study On Isolation Performance Of Pin Diode With Defected Ground Structure (DGS) For RF Switch. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chan, Tai Tiong (2006) Process Planning For CNC Milling Machine. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Chan, Wai Teng (2010) PC Based Motor Control With SMS Aplicatoin. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chan, Wai Weng (2009) Influence Of EDM Machining On Surface Integrity Of SKD 11 Tool Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chan, Xin Zhi (2012) Laser Range Finder Scanning System For Tree Diameter And Circumference Measurement. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chan, Yi Xian (2010) Analyzing VOIP With Video Conferencing In IPV6 Platform. Project Report. UTeM. (Submitted)

Chan, Yun Kim (2012) INTEGRATING QUALITY TOOL ON IMPROVING OVERALL EQUIPMENT EFFICIENCY IN AUTOCLAVE PROCESS: CASE STUDY. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chan, Zhi Hao (2013) Development Of Self-Powered Dual-Axis Solar Tracking System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chan, Alan Kah Poh (2008) The Study Of The Effects Of Surface Roughness Of Loggerhead Sea Turtle Shell In Relation To Drag Coefficient. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chan, Chee Hoong (2017) FEM Analysis On Face Milling Of Inconel 718. Project Report. UTeM, Melaka. (Submitted)

Chan, Chen Hua (2018) Suppressing Structural Vibration Using Multiple Arrays Of Linear Dynamic Vibration Absorber (DVA). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chan, Chin Wei (2011) The Minimization Of 5.75GHz Chebyshev Band Pass Filter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chan, Chun Yew (2015) Design Of Rectifying Circuit With Improved RF-DC Conversion For RF Wireless Power Transfer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chan, Guan Zen (2009) LCD Display Of Lab Status. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chan, How Wan (2008) Design And Development Of Embedded Controller For Control Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chan, Hui Teng (2018) Degradation Behaviour Of Pineapple Leaf Fibre Reinforced Poly Lactic Acid Under Stimulated Conditions. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chan, Jing Ting (2017) Improving Densification Of Alumina-Based Ceramic For Cutting Tool By Using Different Sintering Profiles. Project Report. UTeM, Melaka. (Submitted)

Chan, Kai Yang (2018) Fault Detection And Diagnosis For Water-Cooled Chiller System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chan, Kin How (2018) The Impact Behaviour Of Hybrid Kenaf/Glass Fibre Reinforced Composites. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chan, Lisen (2017) Design And Develop An Energy Harvesting Circuit. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chan, Sheat Lee (2017) The Development Of An Automatic Accident Alert Respond System Through IoT (AARS System). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chan, Yean Kwan (2016) Redesign Warehouse Storage And Retrieval System At Apparel Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chan , Bee Ngo (2008) Turtletron Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chan , Chow Khuen (2008) Design And Development Of A Control System Based On Engine Speed. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chan , Kien How (2011) An Assessment Of Queuing System At Polyclinic Community Ayer Keroh. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chan , Kok Thai (2008) PC Based For Power Failure Monitoring. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chan , Mei Yee (2009) The Study Of The Aggressive Turning Process On Aluminium For Automotive Applications. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chan , Shia Fen (2007) 2D Edutainment For Child's Right Brain Development. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Chandi, Mohd Afiq (2017) Electronic Walking Stick For Visual Impaired. Project Report. UTeM, Melaka. (Submitted)

Chandran, Devaagar (2016) Investigation Phenomena Of Flank Wear At Initial Stage During Cutting Process Of Stainless Stell 304. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chang, Boon Hai (2011) Low Cost Mobile Power Generator System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chang, Ling Kwai (2013) Portable Physiotheraphy Limbs Rehabilitation Robot - Structural Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chang, Siang Yee (2008) The Compatibilizing Effect of Coupling Agent on the Morphological Properties of Banana Fibre as Reinforcement for Polymer Matrix Composites. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chang, Chia Wen (2017) Improving Production Planning Using Open Source Material Requirements Planning (OSS/MRP) Software. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chang, Chu Shen (2016) Sleep Monitoring System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chang, Lee Peng (2017) UTeM Vehicle Sticker Recognition. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chang, Shi Mei (2015) Design Of Control Unit/Data Path For Production Monitoring System Using FPGA Based On Overall Equipment Effectiveness (OEE). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chang , Hin Fuat (2008) A Study Of Corrosion Behaviour Of Aircraft Components Material : Anodized Aluminium 2024-T3. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Chang , Nen E (2007) Omni-Directional Hexapod Walking Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chang , Weng Soon (2008) Corrosion Behaviour Of Steel For Simulated Concete In Choride Aqueous Solution. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Charlseak, Charisa (2017) Design, Analysis And Development Of Frame, Body And Mechatronic System For A Tennis Court Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chau, Kar Hoo (2015) Panic Sensing And Spontaneous Stability System To Avoid Accident. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chau, Man Siang (2011) Electromagnetic Levitator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Ab. Hamid, Mohamad Nor Hafiz (2016) Develop Standardization Work Of Coil Setup At Pressing Machine : A Case Study. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Ali, Mohd Hafiez (2008) Rekabentuk Sistem Pemanas Air Suria. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Ali, Fatin Shahieda (2016) Analysis And Development Of Low Power And Portable 12V DC To 220V AC Inverter. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Che Ammar Faizal, Che Hamzah (2011) Fruit Recognition System (Harum Manis Mangoes). Project Report. UTeM, Melaka. (Submitted)

Che Arbaei, Nur Adlin (2017) Ergonomic Risk Factor That Contribute To Discomfort And Vibration Analysis While Riding Train. Project Report. UTeM, Melaka. (Submitted)

Che Awang, Mohd Norazizi (2017) Determination Of Wear Metals In Automotive Lubricating Oils Using UV Spectrometry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Deraman, Nurul Farhanah (2017) The Importance Of Lean Manufacturing Practices Towards Enhancing SMEs' Productivity. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Engku Roziana , Che Engku Harun (2008) Pembaharuan Pada Sistem Kunci Kereta (Proton Wira). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Harun, Muhammad Harraz (2016) Development Of A Mobile Robot Vision For Object Detection And Tracking Using Pixy Camera. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Hassan, Siti Nuranisa (2016) Development Depth Video Processing Using Stereo Vision Technique In Sport Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Kamariah , Babjan (2007) Develop A 5.8ghz Chebyshev Bandpass Filter Using Microstrip Technologies. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Ku Junoh, Sahida (2016) Design Of Model Reference Adaptive Control (MRAC) For Machine Tool Applications. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Ku Mohd Saifulazwan , Che Ku Ali (2009) Morse Code Translator Using PIC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Ku Norazma Adawiyah , Che Ku Aziz (2008) Design And Experimental Study Of Keris Mould Using Doe. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Lah, Muhammad Ariff Affian (2018) Optimization Of Graphene Field-Effect Transistor (GFET) Using Taguchi- Based GRA. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Manshor, Miftahuddin (2016) The Development Of Hydrogen Generator By Using Water Electrolysis For Small Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Mansor, Muhamad Syahir (2017) Rekabentuk Sistem Pengudaraan Bilik Berkuasa Suria. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Che Mat, Rosli (2012) The Study Of Energy Saving On ACMV (Air-Conditioning And Mechanical Ventilation) System For FKM Building. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Mat, Abdul Azim (2016) Development Of A New Die For The Manufacturing Of Telekom Malaysia Berhad (TM) Metal Based Products. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Mohamad Aidil Hafizie, Che Mohd Rawi (2011) Murai Jaya Log Tracer Using RFID System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Mohd Elyas, Che Omar (2010) Investigation Of Shaft Speed Cause By Turbo System In Vehicles. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Mohd Khairul, Che Lah (2007) Merekabentuk Litar Pendail Automatik Untuk Sistem Keselamatan Rumah Bersepadu (IHSS). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Mood, Muhammad Amir Usamah (2016) Dielectric Sensing (Capacitive) On Cooking Oil's TPC Level. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Munira , Che Razali (2007) Graphic Equalizer And Power Amplifier. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Musa, Muhammad Faiz (2016) Fatigue Life Simulation Of Spot Weld Joint Structure Based On Finite Element Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Noh, Hanis Amirah (2017) The Nose Shape Design Of Bullet Train Using High Profile Curve. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Che Othman, Khairulnisaq (2011) 'Back To Basics' Project. Project Report. UTeM, Melaka. (Submitted)

Che Roizimi, Muhamad Shafiq (2016) Development Of Cutting Technology For Cutting Polymer Foam Material. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Roslan, Mohd Hafizul (2017) Comparative Study Of Moisture Impact And Breakdown Voltage Of Various Transformer Insulating Oil Types. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Roslee, Che Remle (2010) Short Term Load Forecasting With Time Series Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Rozaida , Che Mod (2009) Design Improvement On Support System For Resin Based 3D Printer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Shaari, Murni (2017) Comparatives Studies Of Load Frequency Control (LFC) Using Proportional Integral (PI) Controller And Fuzzy Logic (FL) Controller For Two Area Power System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Soh , Mohd Norhisham (2009) Forward Kinematics Solution For 5 Degree Of Freedom Of Rhino XR-3 Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Wahab, Nor Fatin Izzati (2018) Effect Of Humidity On The Mechanical Performance Of Joints Bonded With Electrically Conductive Adhesive. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Che Wan, Muhamad Farid (2016) CFD Simulation Of Fluid Flow Parameters In Junction Of Aircraft Hydraulic Pipe System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Wan Mazlan, Che Wan Mat Zin (2010) Sound Detecting Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Wan Nurul Hidayah, Che Wan Zakaria (2008) Pic Tape Measure. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Wan Shah Rizam, Che Wan Yem (2006) Controlling Device For Automation Of Heat Flow In Confined Spaced. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Zulkarnain, Che Ain Zulaikha (2017) Determination Of Weighted Efficiency Equation For SB3000HF Inverter. Technical Report. UTeM, Melaka. (Submitted)

Chea, Kah Mun (2017) Design Of High Viscosity Batter Dispensing System To Enhance The Productivity Of Kuih Bahulu. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chea, Meng Huat (2014) Development Of Home Energy Management System (HEMS). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Cheah, Yee Mun (2013) Modelling and experimental investigation on perforated plate mobility. Project Report. UTeM, Melaka. (Submitted)

Cheah, Voon Lu (2007) Design And Implementation Of A Warehouse Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Cheah, Choon Wah (2004) Virtual Local Area Network For Control Network Traffic. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Cheah, Dow Sheng (2017) Effect Of Different Thickness Of Chrome Spray On The Exhaust Pipes. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Cheang, Shing (2017) Design Of Product Packaging For Product Brand Communication Based On Consumer Responses. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chee, Chew Yen (2011) Line Balancing Using Simulation In Semiconductor Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chee, Eric Sai Hoo (2009) PID Of An Inverted Pendulum. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chee, Jiann Tong (2010) Develop A Rotating Speed Sensor System With Link To Visual Basic.Net. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Chee, Kai Sin (2017) Development Of An Automated Coolant System For CNC Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chee, Wen Xiong (2016) Performance Analysis On Domestic Appliances Efficiency For Energy Saving Purpose. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chee, Yik Pei (2017) Implementation Of Information, Decision And Action (IDA) Method In Overall Equipment Effectiveness (OEE) To Improve Manufacturing Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chee, Ying Chen (2018) Study On Single Strut Formation Using Additive Layer Manufacturing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chee Fai, Tan and Sarban Singh, Ranjit Singh (2013) Design And Development Of An Interactive Concurrent Engineering Design System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chek San, Mohamad Khairul Azwan (2016) Design And Analysis Of SIW Bandstop Filter For Interference Suppression In X Band Communication System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chelliah, Ratnadevi (2017) Incorporating Space Division At Initialization Phase Of Bees Algorithm. Project Report. UTeM, Melaka. (Submitted)

Chelvakumari, Arumugam (2010) Plant Management System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chen, Pick Wei (2010) Study On Computer Aided Manufacturing (CAM) Software For A XY Table Positioning System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chen, Jian Sing (2016) Implementation Of RSA Encryption And Decryption On FPGA. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chen, Wei Ping (2018) Design Of Energy Harvesting Powered Wireless Sensor Network For Machinery Health Monitoring. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chen, Wei Wei (2018) Tribological Performance Of Hybrid Composites Based On Palm Kernel Activated Carbon And Alumina Blend. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chen , Siew Teen (2011) Optimization On Manufacturing And Assembly Of The Existing Outdoor Swing. Project Report. UTeM, Melaka Malaysia. (Submitted)

Chen , Pei Ling (2009) LAN VoIP System (LVoIP). Project Report. UTeM, Melaka,Malaysia. (Submitted)

Cheng, Kar Lock (2013) GSM Based Home Security System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Cheng, Ngee Siong (2017) Optimisation Of The Mechanical Properties Of The Engineering Plastics Via Optimal Processing Parameters Using Taguchi Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Cheng, Wei Chiat (2016) Five Axis Tool Path Programming Utilizing CATIA V5 Single Blade. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Cheng , See Yuan and Herawan, Safarudin Gazali and Tee, Boon Tuan and Lee, Yuk Choi (2006) The Effect Of Building Shape Modifications On The Performance Of Wind-Driven Natural Ventilation Of Low-Rise Building Using Computational Fluid Dynamics. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Cheng , Yuan We (2008) Tensile Properties And Morphology Studies Of Polymeric Biocomposite. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Cheng Hwai, Aw (2006) A Study On Precipitation Hardening Of 6061-T6 Aluminium Alloy. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Cheok, Yong Seng (2007) Manually Guided Robot With Minimum 5Kg Of Load. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Cheong, En Yi (2010) Smart Car Alarm System Using Pic Microcontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Cheong, Kai Mun (2016) Determination Of The Influence Of Chemical Treatment To The Strength Of FDM Used Part. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Cheong, Yew Wai (2009) Automatic Lighting System For Children. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Cheong , Teik Keon (2008) The 4-Dof Parallel Robot Fabrication And Design Improvement. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Cheong , Lang Ley (2007) Dance School Management. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Cheong Jia, Pin (2017) The Effect Of Different Shapes And Perforated Hole Of Direct Recycling Hdpe Plastic As Reinforcement In Concrete Structure. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chew, Lai Huat (2011) Integrated Product Design And Optimization Of Multiplex Electrode Holder For ARC Welding Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chew, Chee Seng (2017) Development Of Decision Making Process For Fused Deposition Modeling Machines Selection. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chew, Chin Ong (2016) Air-Conditioning & Mechanical Ventilation And Lighting Retrofit Through Building Simulation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chew, Choy Wen (2014) A Study Of Consumer Perception On Nanotechnology In Cosmetic Products In Melaka. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chew, Jun Ren (2017) Enhanced Performanced Of Circular Polarized Antenna By Using Metasurface. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chew, Sze Siang (2017) Design Of Tri-Polarized Antenna. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chew , Heng Boon (2008) Determination Of 3-Dimensioanl Robot Workspace And Safe Working Area Using Computer Software. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Chey , Long Sheng (2011) Sliding Mode Control (SMC) In Friction Compesation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chi, Lai May (2016) Analysis And Improvement Of Extrusion Machine Breakdown In Solder Wire Manufacturing Operation Using QC Tools. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chia, Clement Kuan You (2013) Voice Recognition Robotic Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chia, Pooi Ching (2013) Preparation Of Spent Tea Leaves Filled Polyurethane Composites For Sustainable Sound Absorbing Materials. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chia, Pooi Ching (2013) Preparation Of Spent Tea Leaves Filled Polyurethane Composites For Sustainable Sound Absorbing Materials. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chia, Anddy Kok Lik (2015) No Load Loss Calculation Of 90MVA 132/33kV Power Transformer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chia , Hwee Siang (2009) Investigation Of Turbine Blade Failure And Stress Distribution By MSC Nastran Patran In Cargo Ship Turbocharger. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chia , Keh Mok (2008) MP3 FM Modulator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chiam, Chun Hong (2017) Integration Of An Automated Guided Vehicle System With A Programmable Logic Controlled Material Handling. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chiam, See Luan (2010) Bluetooth Quiz System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chiang , Kok Wai (2009) Optimization Of Machining Parameters In Laser Cutting. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chiew, Shet Yee (2017) Work Posture Improvement At Plastic Printing Process In Plastic Manufacturing Industry. Technical Report. UTeM, Melaka. (Submitted)

Chiew, Thiam Huat (2016) The Communication, Skill And Knowledge That Affect 5S Methodology Toward Performance Improvement In Paper Mill Manufacturing Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chiew , Tsung Heng (2011) Cutting Force Compensation Analysis Using Sliding Mode Control. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chin, Francis Jun Hau (2013) Robust Positioning Control Of Magnetic Levitation System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chin, Gee Sing (2011) Development Of Automatic Quality Control System Using Vision System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chin, Kat Meng (2008) Design Validation And Development Of Plastic Injection Mould Cavity For Plastic Container Product. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chin, Kok Yet (2010) A Sensorless Speed Identifier Using Adaptive Digital Filtering Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chin, Wai Pick (2010) Study Of Aircraft Propeller - Structural Strength. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chin, Chun Yok (2017) Design And Development Of Vacuum Forming Machine. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Chin, Ee Ling (2018) Consideration Of Hand Grip Strength In The Hand Grinder Handle To Improve Subjective Comfort And Work Productivity. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chin, Jia Yu (2017) The Effect Of Flow Frequency On Heat Exchanger Used In Thermoacoustics. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chin, Kah Yin (2016) An Analysis Of Lard By Using Dielectric Sensing (Impedance). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chin, Kar Ghai (2015) Mobile Air Conditioning Device. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chin, Kean Mun (2017) Formation Of Cobalt Doped Zinc Oxide Photocatalyst. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chin, Khai Hong (2017) A Tangible Programming Solution To Develop Computational Thinking: Programming Block Recognition Using Convolution Neural Network. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chin, Kwang Yhee (2016) Energy Efficiency In Water Pumping System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chin, Shi Hui (2012) An Application Of Linear Programming In Aggreate Planning A Case Study At Electronic Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chin, Sin Yi (2015) A Portable Embedded Gas Leakage Detection Device. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chin, Yi Shian (2010) An Application Of P Control Chart To A Pager Assembly Line. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chin, Zhen Yan (2017) Development Of Automatic Air Humidity And Temperature Controller With Purifying Function Controlled By Arduino. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chin , Feei Ping (2009) Design And Analysis Of Robot Manufacturing System For Automotive Industry. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Chin , Soon Hwa (2008) An Evaluation On Capacity Of Casting Industry By Using Simulation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chin , Su Fok (2007) Degradation Behavior Of PVC-LDPE Blend. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Chiong, Li Shen (2017) A Triz Approach To Reduce Cycle Time In Semiconductor Test Process. Technical Report. UTeM, Melaka. (Submitted)

Chip, Wai Yein (2012) Mobile Health Encyclopedia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Cho, Hon Meng (2015) Turbulence Modeling Verification For Bluff Body Flow. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Choe, Chee Foong (2017) Propose And Design A Tricycle With Cleaning Mechanism. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Choi, Yoke Pool (2009) Development Of Low Pressure Water Hydraulic System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chon, Yu Yun (2016) Preparation And Characterization Of Nano-Alumina Filled HDPE Conducting Polymer Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chong, Kok Hee (2009) Expansion Of Input / Output PIC OMRON CJ1GCPU42H Using PIC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chong, Kooi Lim (2013) Design on fall detection system using Micro-Electro-Mechanical System (MEMS) accelerometer and gyroscope. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chong, Mei Ching (2012) Livestock Autofeeding And Monitoring System (LIFE). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chong, Min Po (2012) "You Have Mail" A Pigeon Hole Monitoring System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chong, Pei Ching (2009) Design An Automated Storage System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chong, Eric Mun Hong (2017) Development Of Non-Contact Level Measurement Inspection System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chong, Fei Ming (2017) To Design An Innovation Coconut Plucking Rod With Advance Mechanism. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chong, Hong Leong (2018) Improvement Of An Indoor Environmental Quality (IEQ) In Engineering Laboratories. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chong, Ivan Wei Yang (2017) Optimization And Development Of A Low Power Microcontroller For IoT Application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chong, Man Yuen (2010) Bidirectional Converter For Renewable Energy Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chong, Shiau Ling (2017) Optimization Of Flexural Strength For ABS Plastic Via Optimal Processing Parameters Using Taguchi Method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chong, Wai Yung (2005) Advertisement Running Light. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chong, Wei Sheng (2018) Surface Textured Palm Kernel Activated Carbon Reinforced Polymeric Composite As A Potential Self-Lubricating Bearing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chong, Wen Kan (2017) Design Of A Low Viscosity Batter Dispensing System To Improve The Productivity Of Kuih Rempeyek. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chong, Yoon Soon (2016) FPGA-Based Hexapod Robot Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chong, Yung Oon (2018) Thermal Insulation Material Made From Kenaf Composite. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chong, Zhi Zyong (2017) Very High Frequency (VHF) Interferometer. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chong , Atik (2011) Automated Clothes Drying System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chong , Min Wen (2009) Analog Very Large Scaled Of Integration (VLSI) Testing And Analysis Of Combinational Circuits Using Computer-Aided Design (CAD) Tools. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Chong , Shek Moi (2009) Voice Activated Door Control System. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Choo, Hong Wei (2009) PIC Based Digital Voltmeter By Using VB. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Choo, Hui Hui (2013) A Study Of Work Postures And Grip Force For Carpal Tunnel Syndrome (CTS) Among Workers In Aero Space Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Choo, Wai Sun (2010) Navigating UTeM In Virtual Environment. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Choo, Hae Ling (2018) Design Of Car Cooling Device For Car Park In Hot Weather Condition. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Choo, Hong Liang (2015) The Effectiveness Of The Control Indoor Environments In Miniature Model Of Poultry House (Assessment On General Ventilation System). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Choo, Jia Huang (2016) Investigation Of The Effect Of Build Orientation On Mechanical Properties Of Fused Deposition Modeling Part. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chook, Xua Cing (2014) Successful Implementation Of Quotewin Software Tendering System : Case Studies In Multinational Companies. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Choon, Zhi Gang (2018) Development Of Monitoring System Using Internet Of Things (IoT) For Hydroponics. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Choon Hong, Ng (2007) Multipurpose Display Board. Project Report. UTeM, Melaka. (Submitted)

Choong, Kwan Hun (2005) Modeling And Simulation Of 3 Degree Of Freedom Of Robot Manipulator. Project Report. UTeM, Melaka Malaysia. (Submitted)

Choong, Kei Shing (2009) Design And Development Of Drive Simulator For Vehicle Dynamic Study. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Choong , Lay Swan (2010) E-Recycle System Model : A Study On Plastic, Paper And Disc. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Choong Hui, Ling (2017) Mechanical And Physical Behavior Of Hevea Brasiliensis (Rubber Wood) Sandwich Structure Effect Of Cell Diameter Variation Of Hexagonal Core. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chow, Kok Lin (2013) Biometric Voice Recognition In Security System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chow, Jia Le (2016) Conceptual Design Of Mini Wind Turbine For Household Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Choy, Ying Yi (2009) Leaching Process Of Nata De Coco - Automation System Design And Implementation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Christopher, Christer Ruben (2017) Design And Development Of A Novel Water Distiller Using Fresnel Lens. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chu, Hun Wei (2015) Design Of Solar-Powered Garden Light With Motion Sensor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chu, Soo Hui (2016) The Development Of Wireless Power Transfer Technologies For Multiple Devices Using Inductive Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chu, Yen Chun (2016) Development Of Portable Power Generator By Using Dynamo. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chu, Yen Chun (2016) Development Of Smart Domestic Electricity Monitoring System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chua, Denis Kiang Wui (2009) An Accuracy Study On The Positioning Of The Pick And Place Manipulator Trainer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chua, Joe Shing (2010) E-Fict Information System Based On Web And SMS. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chua, Pei Yong (2013) Reconfigurable Dual Polarization Antenna. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chua, Eng Seng (2017) Design And Development Of Ultra Low Power Embedded System For IoT Devices. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chua, Shu Yuan (2017) Quantifying Solar Irradiance Variability Using Self-Organizing Map (SOM) Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chua , Ka Hui (2010) A Study On The Quality Of Micro Hole Machining Of Tungsten Carbide. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chua , Yee Ling (2009) Design And Develop A Mobile Robot For Pick And Place Application. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Chuah, Peng Peng (2013) Labor Cost System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chuan , Wen Sheng (2009) Applying Speech Recognition Technology In Learning Basic Mandarin Language. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Chuink, Beng Cheong (2009) Fence Intruder Detection System (FIDS). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chun, Wey Tong (2009) Biomedical Signal Generator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chun Woon, Chen (2016) Wireless Robotic Arm Control Using Myo-armband. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chung, Soon Thien (2011) Cough Noise Suppressor For Video Conferencing (An Image Processing Approach). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chung, Kar Yee (2017) Study Of An Aesthetic / Emotional Preferences On The Product Design Characteristics. Project Report. UTeM, Melaka. (Submitted)

Chwa, Shie Huan (2013) Zigbee-Based Smart Fall Detection And Notification System With Wearable Sensor E-Safe. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Cik Faridah, Samat (2009) Applying Voice Recognition Technology In Learning Basic Arabic Language. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Clara , Valdez (2007) Alarm Dialler. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Colin, Lim Shi Wei (2011) The Implementation Of 3D Technology And Simulation In Interactive Help. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Connie, Bato (2010) The Influence Of Aging Time To Mechanical Properties On Aluminum Silicon. Project Report. UTeM, Melaka, Malaysia. (Submitted)

D

D., Sugumar and Chong, Kuan Eng (2005) Thermal Analysis Of An Inclined Micro Heat Pipe. Project Report. UTeM, Melaka, Malaysia. (Submitted)

D. Ravisankar, Devarajee (2012) System Identification Of Electronic Wedge Brake (EWB). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Da'im, Nur Aina Khairiah (2018) Understanding MOOC Web Design Factor From The Perspective Of Technical Student. Project Report. UTeM, Melaka. (Submitted)

Dahlan , Jalil (2007) Hard Water Treatment System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Dalila, Nizam (2009) Membangunkan Sistem Larut Lesap Untuk Nata De Coco. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Danial , Azmi (2012) Real Time Infra-red Tomography For Pipeline Flow Measurement. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Danie Danial, Mohamed Salim (2012) Implementation Of Secure Confidential-document Transfer And Storage. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Darmawan , Taufik Hidayat (2016) Effect Of Cloud On Solar Photovoltaic Module Output. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Darwis, Zulhalmi (2011) Design Of Water Level Control Training Kit. Project Report. UTeM, Melaka. (Submitted)

Dasuky, Fatin Noor Afifah Afif (2017) Analysis Of Doppler Effect In LTE By Using MATLAB. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Daud, Fatma Fadhilah (2016) Analysis Of Car Hydronic Cooling System With Possibility Of Using Solar Power. Project Report. UTeM, Melaka, Malaysia. (Submitted)

David, Yap Fook Weng and Wong , Yan Chiew and Chairulsyah, Wasli (2011) Performance Analysis Of Optical Communication In Free Space. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Dayang Faridah , Abang Shebli (2005) Control Of DC Motor Using Proportional Integral (PI) Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Dayang Haniza, Hamidon (2005) Video Advertisement For KUTKM : A Study On Persuasive Advertising. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Dayang Kartikasari, Abang Abdullah (2009) Mechanical Properties Of Wood Plastic Composite Made Of Recycled Polypropylene And Recycled Wood Flour. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Dayang Kartini, Haron (2015) Development for kid's learning edutainment (EDU-Play). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Dayang Nor Fatin, Mahmud (2015) Comparative Tribological Investigation Of Bio-Lubricant Formulated From Waste Cooking Oil. Project Report. UTeM, Melaka, Malaysia. (Submitted)

De, Chee Keong (2011) Smart Classroom Using LabVIEW. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Derai, Gowdie Palmer (2017) Real Time Monitoring And Water Leakage Detection System In Underground Pipeline. Project Report. UTeM, Melaka. (Submitted)

Devaki, Suppiah (2015) Prison Cell Lock Detection And Notification. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Devakkumaran, Rajamohan (2011) Process Control Improvement Using Time Study In Muhlbauer Technologies Sdn. Bhd. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Devan, Sanmugam (2015) Springback Deformation Measurement Of Composite Using 3D Scanner After Curing Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Devienia, Louellis Rajit (2005) Simulation Of Sun Tracking Photovoltaic Module In Tropical Countries. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Dg Hafizah, Kassim (2012) Investigation On The Performance Of A Hybrid Microperforated Panel-Natural Waste Fibre As An Eco-Friendly Sound And Noise Barrier. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Dhaniah, Mohd Saleh (2011) Transmission Of Audio And Video Signal Using Square Wave Frequency Modulation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Dharham, Dharmawan (2017) Electronic Throttle Body Tuning Using Non-Linear PID Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Dila Afnida, Azman (2010) Feasible Study On Characterization And Comparison Of Accelerated Life Tests And The Compatible Software For Automotive Component. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Dinesh Kumar , Murugian (2007) Design A Solar Powered Water Pumping System For Typical Household Requirement. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Ding, Yen Yen (2016) Development Of Smart Library System Using RFID. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ding, Yen Yen (2016) Development Of Smart Library System Using RFID. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Divan, Tarmalinggam (2009) Speed Control Using Fuzzy Logic Technique (Application In Automotive). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Dnash Kumar, Mohan (2012) Smartphone Controlled Mobile Security Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Dora , Jau (2006) Design And Implementation Of An Automated Work Piece Loader Indexer Table Station Using Sensor And Programmable Logic Controller (PLC). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Doraisingam, Sankiran Dharma (2017) Fiber Optic Sensor Development On Liquid Cetirizine Detection For Pharmaceutical Industry. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Doran, Wilfred Nini (2009) RFID Automated Gate System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Draman@Muda, Noor Azilah and Muda, Azah Kamilah and Choo, Yun Huoy and Ahmad, Sabrina and Shahrir, Mohammad Shazri (2017) Enhance Cepstrum-Based (MFCC) Extraction Technique With Wavelet Coefficient Method For Improving Identification Accuracy. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Dujong Inggom, Stephanie (2016) Inventory Management System For Multi Level Goods. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Dzul Fitry, Ismail (2007) Investigation Of Microstrip Parallel Coupled Bandpass Filter For GPS Applications. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Dzulhisham, Aminuddin (2010) Reliability Study On Automotive Component Using Design Failure Mode And Effect Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Dzulhusni, Othman (2011) Analytical Study On Control Of Buckling Lobe Onset For Hollow Circular Tube Under Axial Impact. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Dzulkafli, Siti Dzulaika (2016) To Analyse The Works Body Posture In Phn Industry Sdn Bhd Using Rula Assessment Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

E

E, Chao Cher (2011) A Robot Hand With Data Glove Inputs. Project Report. UTeM, Melaka, Malaysia. (Submitted)

E, Chao Cher (2011) A Robot Hand With Data Glove Inputs. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Eddie Sazly , Hussien (2009) UWB Low Noise Amplifier. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Edham Redza, Ahmad Foad (2006) Home Alarm System Using Metal Detector. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Edriss Naqiyuddin, Md Khair (2015) Miniature Of Base Transceiver Station's Power Supply By Solar Energy. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ee , Leng Hong (2008) PIC PWM Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Effendi, Mohamad and Adi, Saptari and Rohana, Abdullah (2008) Productivity Improvement: A Case Study At A Communication Manufacturing Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Effendi , Mohamad and Adi , Saptari and Rohana , Abdullah (2012) The Implementation Of Risk Management In An Aerospace Manufacturing Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Eh, Zheng Yi (2016) Design And Development Of A License Plate Recognition System Using Convolutional Neural Network. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ehsan, Abu Bakar (2015) Effect Of Surfactant On EDM Of Low Conductivity Reaction-Bonded Silicon Carbide. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Eiry, Eldry (2017) Driving Motion Simulator. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Elain, Elweelee (2017) Analysis Of The Factor Affecting The Consumption Of Energy And Energy Trends In Factory 2 FTK,Using Statistical Method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Elda , Ahmad Jailani (2007) Automatic 'Switch On' System For Car Headlamps. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Elfirah, Ab. Rahman (2009) Reverse Engineering Application In The Development Of Automotive Component. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Eliakim, Che Yaakob (2013) To Design And Develop Islanding Detection Interface System For PV Connected Microgrid. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Eliyana, Ruslan (2013) Uplink Radio Access Point With Radio Over Fiber Technology For Picocell System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Elizabeth Dimah, Anak Mula (2006) Perfomance Of Different Types Of Heat Exchanger Designs. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Elleen, Oh Lilien (2010) Learn Basic Mandarin Language By Mobile Game. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Elma Aimmie , Norani (2005) Power System Analysis Of Grid Connected Embedded Generator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Elmahi, Saad Ali Eltigani (2016) Fatigue Life Properties Of Alloy Steel At Different Stress Ratio. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Elmi Jasrie , Ehsan (2008) The Analysis Of 3 Phase Squirrel-Cage Induction Machine Using Simulink. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Elmi Shah, Mohd Khafe (2005) The Traffic Light Control System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Elmy Mawarnie, Nawi (2009) Analysis Of IPV4 And IPV6 Performance In Small Office Home Office (SOHO) Network. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Elvainey , Panus (2007) Remote Control Via Telephone. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Elvie Rosmieza, Mohd Zawawi (2006) Improve Manufacturing Process By Using Line Balancing To Reduce Cycle Time. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Elyanie Nor , Salim (2005) Harmonic In Low Voltage Three Phase Four Wire In Electrical Distribution System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Elyas, Talib (2009) The Mechanical Properties And Morphology Study Of The Silica-PE Composite Using Modified Silica. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Elysa Sakinah , Md. Amin (2013) Development Of Image Filtering System For Car Sticker Detection. Project Report. UTeM, Melaka. (Submitted)

Em, Poh Ping (2009) Development Of A Simple CVT System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Emelia Ernie , Kamaruzzaman (2008) Merekabentuk Sistem Pengering Pakaian Automatik Menggunakan Kaedah Fuzzy Logic. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Emilia Shander, Andrew Abe (2007) Control Heating Of Small Forging Using Oxy-Acetylene Flame. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Emmil , Razmie Leong (2008) A Three Phase PWM Controller With DC Power Link. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Enda Nur Malia , Ngah Deman (2009) Root Cause Analysis Of Core Pin Quality Problem Using Cause And Effect Diagram. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Eng, Wei Sy (2013) Merging Of Writer Identification Technology Into Mobile Application For Forensic Document Handwriting Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Eng , Sze Yee (2007) The Manufacturing Process Of Robo-Kidz-Toe. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Engku Azizuddin, Engku Muhamad (2009) Small Scaled, Low-Powered Electric Car Drive Mechanism. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Engku Nor Zatun Najhah, Ku Rasli (2005) Development Of Basic Calculator Using Microcontroller And Liquid Crystal Display. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Engku Zaidi, Engku Ibrahim (2009) Kajian Analisis Risiko Kualitatif Dan Kuantitatif Pada Penggunaan Stesen Pengisian Gas Asli (NGV). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Erasoffinasari , Amirshariffuddin (2007) Solar Powered Plant Watering System. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Eric, Jau Jeffrey (2012) Performance Of A Condenser With Cooper Oxide (II) Nanoparticles Suspended Into Host Refrigerant. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Erna Nooryanti, Azmi (2006) Intelligent Fire Alarm System Using Bluetooth Mommunication. Project Report. UTeM, Melaka. (Submitted)

Erni Zahani, Buyong (2005) The Investigation Of MIG Welding Parameter Effects On Welding Of Dissimilar Metal (Stainless Steel To Cast Iron). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ernisha Syuhada, Faizul Azmi (2014) Design And Development Of Capacitive Power Transfer System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ernizura, Abu Shah (2009) Design And Implementation A Flexible Bed For Patient Facilities Prototype And Interfacing). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ernyza , Yusuff (2007) Accident Detector Through Cellular Phone (Transmitter). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ervie, Gireen (2006) Quality Management System In Higher Education - A Study On ISO 9001:2000 Implementation At KUTKM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Eryana Eiyda, Hussin (2011) Farm Management System Using RFID. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Eshah Budin Shah, Nur Syahirah (2018) Optimization Of Microstrip-Fed Slot For Short Range Device Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Esma Niza , Nawi (2007) Pembangunan Aloi Aluminium Terkimpal Dengan Retak Permukaan Sebagai Spesimen Ujian Tanpa Musnah (NDT). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Esmie Khalik Mohamad, Ismail (2008) Vibration - Free Positioning Of Flexible Systems Using Filtering Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Esmom, Ezlin Nur Aina (2017) Development Of Pigeon Hole Box System Using IoT For University Application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Estar, Mohd Shahrizan (2008) Automated Electrical Distribution Panel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Eu, Hue Ling (2015) Home Appliances Web Switch Control Wirelessly Using Smartphone. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Eugene, Lee (2005) Design And Implementation Of A Controller-Based Photovoltaic System For Outdoor Lighting Applications. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Eugene , Kuek Vee Chet (2012) Distance Measurement Device Using Programmable Interface Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Evelyn, Usun Kasing (2017) Design And Development Of Solar Powered Smart Dustbin For Domestic Application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ezmikiel, Linggin (2005) DC Motor Position Control With PID Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

F

Fadhilah, Shikh Anuar (2012) A Study Of Copper Based Nanofluids Thermophysical Properties As Advanced Coolant In Automotive Radiator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fadhli Shahir , Zakaria (2012) Design And Implementation of Elevator Controller On A FPGA. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fadhlina , Abdullah (2008) A Design Of An Air Ionizer Using The Cockroft-Walton Multipliers. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Fadhlinasri , Yusop (2005) Sound Detector Walker Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fadhliza, Abdul Latip (2006) Heat And Mass Flow Predictions Through A Compact Heat Exchanger Unit (CHE) With Induced Flow Using CFD Modeling. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fadhlizil Fariz, Md Saad (2009) The Design And Development Of Warning Device For Low Pressure LPG Tank. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fadila, Mohd Atan (2010) Cooperative Spatial Multiplexing In Wireless Sensor Networks. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fadilah, Mohamad Najuri (2006) Mechanically Scanned Clock With LED Display. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fadilah , Mohd Zain (2010) Design And Development An Underwater Glider Using Remote Control (RC). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fadli Rohaizi , Mohd Napiah (2009) Balancing Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fadlilhisham, Ahmad (2008) Home Appliances System Development For CoHAVI Project. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fadzil, Muhammad Faris (2012) Development Of A Mini Race Boat Powered By Solar. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fadzil , Che Man (2013) Development Of Automated-Guided Vehicle For 300kg Trolley Towing Application. Project Report. UTeM, Melaka. (Submitted)

Fadzli, Farid Akmal (2014) A Study On Sustainable Solid Waste Management In Malaysia's Smart City : Wilayah Iskandar. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fadzli, Nur Syahirah (2017) Development Of Portable Air Conditioning Using Thermoelectric Cooling Device. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Fadzli, Nurul Shahira Farhana (2017) Effect Of Acetone Vapor On Mechanical Properties Of Fused Deposition Modeling Printed Part. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Fadzlin , Md Fadzil (2007) Automatic Escalator System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Faezah, Hashim (2011) Intelligent Safety Helmet For Motorcyclist. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fahrulrazi, Hashim (2009) Solar Powered Electric Bicycle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fahukmi Darul Adli, Mohd Noor (2006) Digital IC Tester Driven By PIC16F877A Implementing Exhaustive Test Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Faiezul, Zainal (2007) Design Of Jig And Fixture For Milling Machine, Case Study - Cylindrical Parts. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Faihsal Hidayah , Suduri (2010) Rekabentuk Penyidai Pakaian Automatik Dan Boleh Laras Untuk Kegunaan Domestik (Retractable Automatic Cloth Hanger For Domestic Use). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fairol Hishsyam , Mohd Nor (2008) Blocking Website Demostration And Explaination Model Control By Visual Basic. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fairul Azhar, Abdul Shukor and Ahmad Zaki, Shukor and Muhammad Herman, Jamaluddin (2010) Design of Three Phase Multi Frequency Inverter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fairul Azhar , Nasri (2008) Automatic Cable Stripper. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Fairulazri, Mohammad Koshim (2008) Pole Lifter Mechanism (Mekanisma Pengangkat Galah). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fairuz Fadzly , Nawawi (2006) Multiple Infrared Sensing Developments. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fairuzah, Abu Samah (2007) Kajian Kelesuan Ke Atas Logam Dengan Menggunakan Beban Lenturan. Project Report. UTeM, Melaka. (Submitted)

Fairuzradzi , Md Yusop (2008) Membangunkan Dan Menganalisa Sistem Hidraulik Air Bertekanan Rendah. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Faisal Faris, Rahim (2012) Optimization Of Mixing Parameters To Produce PP - Enr Blend Via Response Surface Methodology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Faiz Adzhar, Abdul Halim (2015) Kajian Berkaitan Sumber Kawasan Pelepasan Inventori Bagi Taman Perumahan Di Kawasan Majlis Bandaraya Melaka Bersejarah (MBMB). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Faiz Hafizuddin , Mazlan (2011) Dual Band Circularly Polarized Microstrip Patch Antenna For GPS Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Faizal, Idris (2009) Controlled Conveyor System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Faizal , Ahmad (2009) Vibration - Free Positioning Of Gantry Crane System Using Impulse Shaping Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Faizal , Hamzah (2008) Generation Of HV Impulse And Testing On Insulator. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Faizal , Zainol (2007) Gage Capability Study of Thin Film Coating Roughness Measurement Method Using Profilometer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Faizatul Hanim, Rahmat (2013) Traffic Light Led Fault Monitoring And Detection System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Faizil, Wasbari (2013) Enhancing Eco-Friendly Hydraulic Technology: The Development Of Low Pressure Water Hydraulic Manipulator For Small And Medium Industries In Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Faizil, Wasbari (2013) Study Of Heat Exchanger Effects On Car Air - Conditioning System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Faizul, Ahmad (2006) Study Of Wind Pressure Distribution Around Low-Rise Building By Using CFD Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Faizul Akmar, Abdul Kadir and Khisbullah, Hudha and Mohd. Zakaria, Mohd. Nasir and Ubaidillah, . (2007) Development of a Magnetically Activated Brake System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Faizul Azdi, Amat Puadi (2008) Laci Simpanan Barang Automatik. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fakhrul Faiz, Hamdan (2015) Development Of River Current Or Turbulence Energy Harvesting System : Comparative Study On The Energy Generating Performance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fakhrullah, Nur Syahirah (2017) Smart Home Security System Based On Internet Of Things. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Fakrul Ridhuanuddin, Ghazali (2011) Real-Time SMS Alert System For Centralize Mail Compartment. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fakrulradzi, Idris (2013) Deployment And Performance Analysis Of Wifi Network. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fakrulradzi, Idris and Noor Shahida, Mohd Kasim (2010) Performance Analysis on Data Transmission Over Wimax. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fara Adillah, Che Idris (2009) Design And Analysis Of Floating Pump Platform Using Finite Element Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fara Maizura, Karia (2015) Automatic Power Source Inside Lecturer Room. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Farah Asyikin, Zainal (2006) Graphical User Interface For 3COM 4200 Switch Configuration (GSC). Project Report. UTeM, Melaka. (Submitted)

Farah Elyanie, Dato' Hj Mohd Zolkafly (2006) The Effect Of Window Configuration And Position On Cross Ventilation In A Room; CFD Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Farah Nadirah, Alias (2008) Pengawal Letak Kereta Ultrasonik. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Farah Najwa , Mokhtar (2011) MAC Protocol For Wireless Cognitive Network. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Farah Nazmi, Kamarudin (2008) Brush Teeth With Music For Treatment Of Autism Children. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Farah Shahnaz, Feroz and Yosza, Dasril and Hanissah, Mohamad @ Sulaiman and Nor Azlina, Abdul Razak (2010) Sms Application Development in a Vision System and Statistical Applications in Vision-Based Quality Control Systems. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Farah Sharidah, Ab. Gafor (2013) Automatic Toilet. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Farah Umaima, Miswan (2008) Drilling Of Aero Composite Material. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Farah Zunurain, Ab Latif (2010) High Voltage And Impulse Test On Industrial Pipeline. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Farahdatul Sahuda , Suhiri (2009) Effect Of Martempering Process On Plain Carbon Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Farahdiana , Mastor (2010) SMS Based Wireless Home Appliance Control System And Security. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Farahilda, Masekam (2009) Mapping Corrosion Activities Of Various Concentration Of Acidic Solution In A Pipe Using Ultrasonic Testing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Farahiyah , Ghazali (2007) Device Switching Using Pc's Parallel Port. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Farahniza, Othman (2017) Design and development of planar antenna for short range communications. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Farakkasi, Nursyafikah (2016) Characterization Of 5g Antenna At 38 Ghz. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fareezan Salha, Mohamed Azahar (2006) Kawalan Peralatan Elektrik Berasaskan Mikropengawal Menggunakan Isyarat DTMF. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Farhan, Ahmad Fuad (2012) The Implementation Of Design For Reliability In Product Development. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Farhan Arif, Mohamad (2012) Application Radio Frequency In Keeping Track Shopping Trolley Using GSM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Farhana, Abd Kadir (2011) Design And Analysis Of Mobile Robot For Road Side Curb Painting. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Farhana, Abd Razak (2008) Control Of 2 Dimensional Inverted Pendulum Using MATLAB. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Farhana, Masron (2012) The Mechanical Properties Of Polypropylene/Polylactic Acid (PP-PLA) Polymer Blends. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Farhana, Md. Lazi (2012) Cost Saving Campaign. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Farhani, Mohamad (2008) Design And Fabrication Of Bollard Light Using Modern Product Development Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Farhani, Mohamad (2008) Design and fabrication of bollard light using modern product development process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Farid Arafat, Azidin and Mai Mariam, Mohammad Aminuddin and Yusmarnita, Yusof and Zulkarnain , Zainudin (2007) Developing Power Inverter For Motor Drives System In Laboratory. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Farid Arafat, Azidin and Zulkarnain, Zainuddin and Yusmarnita, Yusof and Puteri Suriyani, Megat Wazir (2010) Develop Angular Speed Detection System Using Infrared Sensor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Farid Nasir, Abdul-Fattah (2016) Biodiesel Production Using Waste Cooking Oil Through The Microwave Irradiation And Conventional Method Using Cockle As Catalyst. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Faridah, Omardin (2009) A Study Of Project Management Based On Manufacturing Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Faridah , Jamil (2005) Remote Control Traffic Light System. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Faris, Azman (2015) Parametric Study Of Biodiesel Properties To The Storage Condition. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Faris Adam , Mohd Ghazali (2013) Mobile Robot Motion Planning Based On Notion Of Artificial Potential Field (APF). Project Report. UTeM, Melaka. (Submitted)

Farizzamzam, Nasruddin (2009) Design And Analysis Of The Drivetrain System For Formula SAE Race Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Farlister Glenn, Gainus (2013) Feasibilty Study In Implementing Of Microgrid By Using Fuel Cells. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fateh Sakinah, Abu Bakar (2015) Evaluation Of Energy Consumptions In Chicken Slaughtering Industry Using Cleaner Production Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fatehah Hanim, Ahmad Othman (2013) Forecasting Plant Vigor Through Vegetation Index Mapping. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fatein Amina, Abd Malik (2008) Integrated Lens Antenna (ILA) For Automotive Application At Frequency 77GHZ. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Faten Nadia, Mansor (2010) Tank Water Level Sensor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fathin Afiqah , Ghazali (2010) Microstrip Fractal Array Antenna. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fathuddin, Mohd Zainuddin (2009) Factory Environment Monitoring Based On Wireless Sensor Network. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fathullah Farid , Zakaria (2011) Design And Develop An Eco Fly Killer In UTeM's Cafeteria. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fatimah, Morad (2015) Remote Monitoring Of Energy Meter Via SMS. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fatimah , Razak (2008) Wireless Camera Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fatimah Al Zahrah, Mohd Sa'at and Nor Azmmi, Masripan (2009) A Feasibility Study And The Design Of A Waste Heat Utilised Cloth Drier For Household Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fatimahtul Adnin, Sulaiman (2009) A Study On Graphite Machining. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fatin Aida Aqila, Zakaria (2015) The Human Analysis And Ergonomics For The Seat Design Of Electric Buggy (Driver Seat). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fatin Nabilah, Rosly (2013) Design And Analysis Of Polypropylene Plastic Name Card Holder. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fatin Nabilah, Abd Halim (2015) Development Of Home Security Alert System Using GSM Modules. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fatin Shaj, Ahmad Jamal (2014) Universal Time And Calendar System In Field Programmable Gate Array (FPGA). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fatin Syakira, Mohd Hassan (2015) Pneumatic Driven 180 Degree Rotation Pick And Place Mechanism With Conveyor System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fatin Zuriah, Mohammad Zuhary (2014) Iris Recognition Using Artificial Neural Network. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fauzatulhamla, Mohd Salleh (2007) Downtime System (DTS) For Press Shop Department. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fauzi, Ramly (2009) Functional Testing And Develop Customer Xperience Solution ( CXS ) Test Procedure For Cubic Electronic Sdn Bhd. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fauziah, Osman (2011) Design Layout And Simulation Of Complementary Metal-Oxide-Semiconductor (CMOS) Operation Amplifier. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fauzul Hakim, Ab. Muis (2006) E-Tuition Management. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fazila , Aziz (2009) Data Logger Using PIC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fazilah, Fuzi (2011) An Analysis Of Intrusion Detection System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fazli Idwan , Dolkafri (2009) Development Of Distributed Control System (DCS) Using Temperature Process Control Plant. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Fazliana, Ahmad Buderi (2015) Assessment On The Impact Of Distributed Generation (Dg) Penetration On Grid Protection System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fazliana , Hassan (2011) Telephone Operated Remote Control. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fazly, Buang (2010) Modeling And Simulation Of Horizontal Wind Turbine Blade. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fazri Efendi, Ghari (2005) Perisian Pembelajaran Sebutan Makhraj Berasaskan Pembangunan Sistem Pengecaman Pertuturan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fazrie , Zamri (2005) Thermal Stress Analysis For Brake Pad. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Febrian, Idral (2010) Conceptual Of A Single Seater Formula Racing Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Felix Ho, Feng Nam (2006) Design Of Pi/4-Shift DQPSK Transmitter For Wireless Personal Communication. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Felix Norman, Lazarus Goh (2005) Design Of Carr-Purcell Generator For Pulse Programmer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ferland, Karshiff Sirinus (2016) 3D Milling Machine Using LEGO Mindstorm. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fevilia Nurnadia, Andria Syaifoel (2012) The Gap Analysis Measurement Of Linear Vs Non-Linear Parametric On Costemer Satification Based On Importance Performance Analysis And Kano Method In Service Industries(Hotel). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fidzrie Hafiz, Razali (2015) Ultra Thin Body 18nm SOI N-MOSFET (The Effect Of Sidewall Spacer Oxide Thickness To The Device Performance). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fikri Naim, Mohd Rosli (2012) Hexapod Robot Motor Controller Using FPGA. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Filzah, Ghazali (2015) 2D Animation: Advertisement About Obesity Among Children. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Filzah , Abu Kasim (2009) Stepper Motor Drive Using PIC Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Firdaus, Bachok (2006) Obtacle Avoidance Robot Algorithm. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Firdaus, Hassan (2005) Kawalan Kelajuan Motor Arus Terus Menggunakan Pengawalmikro. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Firdaus Abdullah, Hashim (2006) Reverse Engineering Of An Ergonomic Office Chair. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Firdaus Fadzilah, Husani (2008) Design And Fabrication Of Street Light Using Modern Product Development Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Firdaus Hakimi, Hassan (2010) Determination Of The Optimum Design Parameters For A Family Mould. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Firkhan Akhmadeen , Maarof (2008) Kinematic Study Of A Macpherson Susupension System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Florence , Raymon (2006) Comparative Study On The Performance Of AC And DC Welding Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fong, See Yan (2009) Longitudinal Aerodynamic Performance Of An Aircraft Model. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fong, Yan Li (2013) Quality Investigation Of Laser Wood Machining. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fong, Jian Hui (2015) 3D Hand Printing Technology Animation: Touch. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fong , Yee Siang (2009) Effect Of Fuel Moisture Content On Solid Waste Combustion. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Foo, Wei Hong (2018) Study On LED Growth Light To Improve The Quality Of Lettuce And Help In Plants Growth. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Foo, Wei Ming (2016) Portable Wireless Heart Rate Monitor For Elderly Patients. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Foo, Yeong Horng (2016) Optical And Photoelectrochemical Studies Of Tungsten Sulphoselenide (Wsse) Thin Films For Solar Panels. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Foo, Yoong Kin (2015) Emergency Mobile Contacts Using Android Application System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Foong, Yoo Kim (2008) The Oblique Impact On Crash Barrier. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Foong , Weng Kang (2008) Application Of Inventory Model In Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Freddy Hock Boo, Loy (2005) Heat Transfer From The Finned Surface. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Frische , Kuleh Engan (2008) Network Interfacing And GUI Development Of Speech Recognition System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fudhail, Abdul Munir (2011) Design And Fabrication Of A Lightweight Dry Clutch Disc For A Mini Farming Tractor. Project Report. UTeM. (Submitted)

Fung Yap, Tian (2008) Handheld Environment Meter. Project Report. UTeM, Melaka. (Submitted)

Fuzairin, Mat Noor (2006) Design Electro-Mechanical Line Tracking Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

G

G. Thinesh Kumar , Ganasagaran (2011) Low Maintenance Aquarium : Automatic Controller System For Lighting, Oxygen And Filter System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Gabriel, Jatu (2006) An Interactive Learning On Alternating Current Power Transformer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Gabriel , Nisau (2008) The Study On Harmonic Distortion Effects On Transformer Connections. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Gakim, Miron (2009) Study Of Structure, Microstructure And Corrosion Properties Of AISI 304 Toward Marine Specification. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Galoh Kesuma Ningrat , Zakaria (2008) W-CDMA Simulation For Receiver Part And Ber Performance In Awgn, Rayleigh Channel And Rician. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Gan, Bee Geok (2010) Mechanical And Thermal Properties Of Pure Nickel As An Alternative Automotive Body Material. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Gan, Boon Boon (2011) Motion Detection Using Passive Infrared Sensor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Gan, Chun Hsiang (2005) Power Factor Analyze Using Capacitor Bank. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Gan, Hock Seng (2012) Analysis Of VoIP Attacks. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Gan, Kok Hway (2009) Application Of Triz Methodology In Casting Process : A Case Study. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Gan, Chong Chun (2017) Design And Development Of Single Phase 3-Level Cascaded H-Bridge Multilevel Inverter Using Sinusoidal Pulse Width Modulation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Gan, Kok Heng (2009) Improvement On The Domestic Solar Water Heating Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Gan, Melvin Yeou Wei (2017) Design Framework To Optimize The Walking Curve Of Klann Mechanism. Project Report. UTeM, Melaka. (Submitted)

Ganesh Kumar , Krishnan (2009) To Investigate Effect of Strengthener Variation in Mechanical Properties of Metal Matrix Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Gee, Soon Yow (2018) The Study Of Driver's Acceptance Toward Self Driving Vehicle In Melaka. Project Report. UTeM, Melaka. (Submitted)

Gerijih, Debie Devisser (2016) Prototype Development Of Thermal Comfort Level Control In A Medium Distance Flight. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ghafar, Jenal (2010) Stand-Alone Photovoltaic (PV) System Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ghanasegaran, Yogeswaran (2017) Remote Controlled Construction System For Emergency Aftermath. Project Report. UTeM, Melaka. (Submitted)

Ghazali, Haris Fahaza (2011) Producing CaCu3Ti4O12 Doped Lanthanum (III) Acetate Hydrate Via Solid State Reactions. Project Report. UTeM, Melaka. (Submitted)

Ghazali, Muhamad Zulli Khairi (2016) Fingerprint Based Security Box Using Arduino. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ghazali, Muhammad Hafizuddin (2018) Effect Of Reflow Time On Hardness,Electrical Resistivity And Wettability Of CNT In SAC305. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ghee, Yih Farn (2016) Development Of Hand Gesture Glove To Control Robot Arm. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ghulam Shabir, Muhammad Syazwan (2017) Development Drill Press Stand For Portable Electric Drill. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Gilbert , George (2006) Study Of Fuel Cell Powered Wheelchair. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Go, Sook Huey (2008) The Mechanical Properties And Morphology Study Of The Silica-Reinforced Polyethylene (PE) Composites. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Goh, Jzun Hwee (2012) Modelling Of Non-Reverberant Acoustic Space Using Statistical Energy Analysis (Sea). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Goh, Merreen (2012) Decision Support System For Organizing Supervision Distribution (DSSOSD). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Goh, Meryin (2011) Developing A Methodology For Productivity Improvement In A Manufacturing Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Goh, Mik Chen (2010) Development Of Wi-Fi Access Point For Controlling Serial Port. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Goh, Zia Huey (2013) Performance Characterization Of Photo Materials Used In Silicon Technology Fabrication Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Goh, Chia Min (2015) Application Of Integrated Analytic Hierarchy Process (AHP) And Technique Of Order Preference By Similarity To Ideal Solution (TOPSIS) In Material Selection For Automotive Fender Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Goh, Ong Sing (2004) An Intelligent Robot System (IBOT). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Goh, Ong Sing and Mohd. Shamsuri, Md. Saad and Rahman, Hashim and Lee, Mei Ph'ng (2004) A Global Internet-Based Crisis Communication : A Case Study On Sars Using Intelligent Agent. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Goh, Say Kheat (2017) Study Of Cold Room Performance Analysis (Temperature And Air Flow Distribution) In An Application Laboratory (Laboratory Equipment). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Goh, Siew Yun (2016) Analysis Of 20NM SOI NMOS Device With Different Gate Spacer Dielectric. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Goh, Siew Yun (2016) Development Of Self-Powered Thermoelectric Based Cooling System For LCD Panel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Goh, Wan Bing (2015) Digital 3D Animation: Healthy Diet For Children By Using Cinemetography Techniques. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Goh, Wee Yen (2012) Development Of Direct Torque Control (DTC) Of Five-Phase Induction Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Goh, Zhongyu (2018) Influence Of Roof Shape On The Natural Ventilation Potential Of A Building. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Goh , Cheng Yaik (2007) Motor Controller For Solar Energy Optimum Acquisition. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Goh , Chep Kien (2009) Design And Development Of Tire Force Measuring Device. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Goh , Hooi Fen (2010) Real Time Medical Inventory Control. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Goh , Lirong (2007) Inventory Management System Using Distributed System Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Goh , Vivian Mew Cheoung (2010) FTMK Virtual Tour. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Goh , Wern Chie (2008) The Study Of Flow Visualization On LNT Catalytic Converter Using CFD-Fluent. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Goo , Chay Shuen (2011) A Study On The Corrosion Behavior Of Welded 304 Stainless Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Guna, Raja (2009) Automated Speed Control. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Gunalan, Thiviya (2018) Overall Labor Efficiency Study Using Maynard Operational Sequence Technique At Manufacturing Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Gunaratnam, Balaratnaraj (2004) P2P Video Conferencing Communication Tool. Project Report. UTeM, Melaka. (Submitted)

Gunasegaran, Vijaya Kumaran (2010) Identification Of Causes Of Varation In The Semiconductor Manufacturing Processes By Statistical Analysis A Six Sigma Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Gunavathi , Sathappan (2007) Analysis Of Network Performance In Majlis Perbandaran Manjung (MPM). Project Report. Melaka, Malaysia, UTeM. (Submitted)

Gunawathy, Muthusamy (2005) Electrolytic Capacitor Transistor Tester. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Gusni, Misniati (2009) PC Based Washing Machine Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Gwee , Chiou Chin (2008) Design And Modeling Of Multiple Tank Control For Fluid Circulation System Using Fuzzy Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

H

H'ng, Zhuang Wei (2013) Design Of Operational Counting Device. Project Report. UTeM, Melaka. (Submitted)

Ha, Hei Kuai (2005) Real Time Clock Display. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Habibah, Jamaludin (2006) Performance Test Methodology For 3 - Axis Machining Center. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hadi Abdul , Salaam (2006) Manufacturing Modelling & Simulation In A Manufacturing Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hadifnafila, Selamat (2009) Automated Water Pouring System Using 68000 Microprocessor Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hady , Efendy (2011) Utilization Of Palm Waste As An Alternative Powder Reinforcement In Friction Materials Non- Asbestos In Manufacturing Motorcycle Brake Pad. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hadzlin, Nur Nabilah (2017) A Study On Profile Design Of Scarves That Can Influence The Aesthetic Value And Product Evaluation Using Kano Model Method And IPA. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hafiz, Mohd Salleh (2009) Study On Design Of Workstation Meeting Ergonomic Requirement For CADCAM Laboratory In FKP, UTeM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hafiz, Hashim (2009) Pemodelan Enjin Dua Lejang Dalam Perisian Simulasi "GT-POWER". Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hafiz, Nur Afifa (2017) Design And Development Of Testing Rig For Resemblance Of Tidal Phenomena Using Solidthinking. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hafiz , Nazar (2009) Automatic Control Room Temperature Using PIC With LCD Display. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hafiz Afandi, Halida Hanim (2017) Cutting Tool Jig Design For Brake Disc Skimming Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hafiz Amini, Jamaluddin (2008) Design And Simulation Of Digital Audio Broadcasting Transmitter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hafizah, Che Hussin (2009) Study On The Aftermarket Production Of Ignition System In Relation of Engine Performance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hafizah, Md Nor (2012) Smart Protection System For Industry And Domestic Distribution Board (SPeeeDo). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hafizah, Abd Latif (2015) Lecturers Availability Display Board. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hafizah , Yusop (2007) Microstrip Filter Calculator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hafizah , Hamzah (2008) Data Library In Manufacturing (Cutting Tool) System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hafizah , Ka'ab (2010) Development Of Intelligent Traffic Light Control Using Fuzzy Logic. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hafiziana , Othman (2008) Autonomous Maintenance Programme For Drilling Machine. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Hafizin , Hanipah (2013) Design And Development Of A Protable Spark Plug Tester For Motocycle User. Project Report. UTeM, Melaka. (Submitted)

Hafizuddin, Zuhaimi (2013) The Effect Of Different Heat Treatment On Surface Retrogression On Aluminum Alloy 7075. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hafizul Effendi , Mahadi (2005) The Design Of Smart Battery Charger With Display. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hafrizullah , Hasanudin (2009) Book Rental System Using RFID. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Haidzer Isa , A Rahman (2009) Analysis The Contribution And Effect Of Coolant To Straightness In Cylindrical Grinding. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hairi Azdy, Aezman @ Azman (2005) Mobile Robot Simulation And Controller Design With Matlab/Simulink. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hairil Amri, Jaafar (2008) Speech Operated System For Home Appliances. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Hairol Farisah, Jaafar (2008) Engine RPM Based Sensing Techniques. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hairuddin, Norfazlyana (2017) Simulation Design On Power Trip Prevention Switching Circuit For Domestic Fix Demand. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hairul Anuar , Mohd Yusof (2007) Conceptual And Mechanical Design Of Master Slave (Parent - Child) Robot For Painting Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hairul Hizwan, A.Aziz (2011) The Performance Of IPv4 And IPv6 Using TCP And UDP On IEEE 802.11 n WLAN. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hairus Saleh, Riduan (2017) Optimization Parameter And Mechanical Properties For Aluminium 5052-H32 By Multi-Passes Butt Joint Using Friction Stir Welding. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Haizri, Hassim (2007) Smart Aquarium (Automatic Water Changer). Project Report. UTeM, Melaka. (Submitted)

Halida, Mohd Zahari (2005) Monitoring Network By Capturing Pakets Using C++. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Halim, Asmira (2017) Sustainable Design Manufacturing To The Needs Of Industry 4.0. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Halim, Mohd Faizal and Abu Shah, Ismail and Tamin, Mohd Nasir and Sulaiman, Saiful Naim and Samekto, Haryanti (2017) Effect Of Damage Based Residual Strain From Preceding Draw Forming Processes In Crash Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Halim, Nabilah (2016) Design Of Fuzzy-Pid Controller For Tracking Performance Of Machine Tool. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Halim, Nurhafizah (2017) A Study Of Fabrication Costs Of Testing Rig For River Trash Collector System With The Application Of Solid Thinking Inspire. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Halim, Nurul Wahida (2017) Development Of Rubber Track Wheelchair Using Arduino Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Halimah , Abd Halim (2010) Design Improvement On Trimming Workstation For Aerospace Company Based On Ergonomics Analysis (Case Study at CTRM AC Sdn Bhd). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Halimatun , Hj. Mohd Sharaffudin (2007) Kajian ke atas kesan aliran air kotor mempengaruhi kehilangan geseran dalam paip bulat. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Halina, Abdul Halim (2007) Implementation Of Wireless Network At USM Engineering Campus's Hostel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Halis, Hanifi (2012) Productiviti Improvement In Manufacturing Industry. Project Report. UTeM, Melaka< Malaysia. (Submitted)

Hambali, Arep @ Ariff (2008) Development Of Design Concept Selection Using Analytical Hierarchy Process (AHP) For Automotive Components. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hamdan, Zulmajid (2008) Modeling And Design Embedded Controller For A Condenser System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hamdan, Mohammad Noor Zaidi (2017) The Study Of Luminance Effect On Surface Roughness Of Metallic Surface By Using Vision System Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hamdan, Mohd Alairizzaman (2017) An Investigation On Variable System With Automatic Damper And Controllable Motor Blower Speed Using A Trainer Kit. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hamdan, Siti Nur Raheena (2016) Investigation Of Surface Integrity When Machining AISI 1045 Using Uncoated Carbide Cutting Tools. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hamdan , yahayudin (2011) Effect Of Cutting Parameter On Thin Wall Machining Accuracy. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hamedan, Norsyazura Aiza (2017) Investigation Of The Capability Of Local Palm Oil Infused With Nanoparticle As A New Additive For Lube Oil. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hamid, Fatin Aini (2017) An Investigation Of Milling Process With Inclusion Of Nanoparticles As A Coolant. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hamidah , Mashum (2005) Portal Of Custom Sungai Petani, HCI Preferred For Government Sector. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Hamidi, Roshidah (2018) Investigation On Electrical Properties,Morphological Analysis And Surface Roughness Of Silver Nanoparticles-Filled Epoxy Conductive Ink. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hamidon Paizal , Ahmad Puad (2008) Design A Compensator For DC-DC Converter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hamsani, Nurul Fatiehah (2016) Innovative Packaging Design To Enhance The Performance Toward Global Market At Bumiputra SME's Food Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hamzah, Abu Bakar (2007) Measurement Logging Data Using Bluetooth. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hamzah, Sakidin and Mohd Ruddin, Ab Ghani and Syed Najib, Syed Salim and Norsarizan, Mat Youb (2010) Active Suspension Using Optimal Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hamzah, Sakidin and Tay, Choo Chuan and Farhan, Hanaffi and Aziah, Khamis (2011) Micro-Controller Based Single Phase Power Supply Of Solar Battery Charger For Gazebo Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hamzah, Ahmad Sarudin (2016) Loose Col-Pick Equipment. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hamzah, Muhammad Haziq (2018) Comparison Of Laminar And Turbulent Model Of Nanofluid Flow In Microchannel. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hamzah , Syamsulrizal (2009) The Fracture Mechanic On The Spot Welded Joint. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hamzah Asyrani, Sulaiman and Muhammad Noorazlan Shah, Zainudin and Juwita, Mohd Sultan and Ahmad Sayuthi, Mohamad Shokri and Fakrulradzi, Idris (2011) Discrete Collision Detection In High Performance Computing (GPU Acceleration System). Project Report. UTeM. (Submitted)

Hamzaitul Akmarizal, Hamdan (2011) Evaluation Of Mechanical Properties Of Inorganic Based Composities Adhesive By Experimental Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hani Aimi, Hashim (2011) Parking Control System Using Microprocessor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hanif, Asha'ri (2013) Design And Machining Of Aerospace Component. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hanim, Abdul Razak and Hazura, Haroon and Mardiana, Bidin (2009) Wireless Attendance System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hanipah, Hussin and Rabiatul Adawiah, Ab.Aziz and Siti Balqish, Ab.Aziz (2010) Impak Teknik Seni Batik ke Atas Bahan Penghasilan Batik. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hanis , Hasnul (2007) Rekabentuk Sistem Pembungkusan Untuk Menghasilkan Produk Nata De Coco. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Hanis Haziqah , Mazharudin (2012) Zealous Android's Sophisticated Timetable Reminder And Organizer (ZASTRO) System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hanissah, Mohamad @ Sulaiman and Yosza, Dasril and Farah Shahnaz, Feroz and Norazlina, Abd Razak and Wong, Yan Chiew (2010) The Performance of Bootstrap Confidence Interval of Robust Process Capability Index in Electronics Production Quality Control. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Haniza , Ismail (2008) Sms Controller. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Hanizat, Nurhidayah (2016) A Study To Design And Fabricate A Prototype Of River Trash Collector System (RTCS). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hareshwara Ruban , Subramaniam (2013) Modelling For Prediction And Optimization Of Mechanical Response Of Unequal Thickness Steel Sheet Resistance Spot Welds In Tensile-Shear Loading Condition. Project Report. UTeM, Melaka. (Submitted)

Haridan , Abdul Rahim (2005) Analytical Model For Data Mining Processes In Higher Learning Systems. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Harin, Akal (2006) Comparative Study Between Sinusoidal Pulse Width Modulation Technique And Six Step Technique For Voltage Source Inverter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Harizah , Ideris (2012) HIRARC Assesment Of Machining Processes. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Harlina, Ngah (2009) Study Of The Thermal Properties Of Chitosan Film. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Harmali, Mohd Elfi Ezzry (2016) Dual Port Antenna With Single Radiator Element. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Harmida, Arobi (2011) In-Vehicle Signing System Using RFID. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Harnani , Hanapi (2007) Development Of Satellite Communication Filter Using Microstrip Technologies. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Haron, Khairul Anwar (2008) Lead Time Improvement By Re - Layout At Aerospace Company (Ctrm Aero Composite Sdn Bhd). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Haroon, Hazura and Mohd Zain, Anis Suhaila and Abdul Razak, Hanim and Salehuddin, Fauziyah and Saari, Sahbudin (2018) Novel Design Of Silicon- Based Microring Optical Filters For Optical Interconnect System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Harrison Sentu, Kelon (2005) Simulasi Saluran Perhubungan Penerimaan Digital Bagi Isyarat Frekuensi Pertengahan (Intermediate Frequency, If) Dalam Saluran Tanpa Hingar Dan Berhingar. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Harry, James (2009) Electronics Ballast With Power Factor Correction And Harmonics Filter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Harry, Steven (2015) Potential Study Of Piezoelectricity Generation System From Vehicle Vibration. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hartini, Saad (2006) Study On Types Of Sensor Used In Obstacle Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hartini, Zulkefli (2015) The Profile Design (Image) Towards Customer Emotional Responses. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Harun, Ahmad Izzuddin (2016) The Profile Design Identification Based On Graphical Approach Forwards Cognitive Style. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Harun, Ahmad Syauqi Haikal (2016) Study Of Engine Performance Effect Using Variable Air Filter On Perodua Viva 1.0 Engine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Harun, Hafizul Abdullah (2016) OCDMA Network Performance Using Various Detection Techniques. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Harun, Nurfarahani (2016) Hybrid Vehicle (HV) Engine Vibration Sources Detection And Identification Using Time-Frequency Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Haryatie , Samsuri (2009) Investigation Of Plate Welding Quality By Robot Welding Using Nondestructive Technique. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Hasan, Fatin Hanani (2017) Application Of Integrated Analytic Hierarchy Process (AHP) And Technique Of Order Preference By Similarity To Ideal Solution (TOPSIS) In Conceptual Design Selection Of Hospital Beds. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hasan, Nor Syazana (2015) The Study Of Asset Maintenance Practices For Solar Photovoltaic (PV) System In Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hasani, Nurul'Ain Sakinah (2015) Wireless Door Key System Using Bluetooth And Arduino (WeDoKey). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hasbul Haqqi, Md Husin (2010) Prototype 2 Way Basic Communication System By Using Cooper Wire. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hasbullah, Mohamad Faisal Zulfaqqar (2017) Development Of Portable Power Generation System With Low Cost Vertical Axis Wind Turbine. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hasfarizal, Farizad (2015) Design And Modification For Child Restraint Seat On Moped Motorcycle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hashim, Ahmad Firdaus (2017) Enhancing The Breakdown Voltage Of Mineral Oil Mixed With Natural Ester Oil. Technical Report. UTeM, Melaka. (Submitted)

Hashim, Ahmad Hariz (2017) Development Of An Automated Garden Irrigation System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hashim, Mohamad Husaini (2017) Reducing Air Press Turbulence By CFD Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hashim, Muhamad Hanif (2018) Mechanical Dispersion Of Carbon Nanotube For Chloroprene Rubber Compounding. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hashim, Umira Syafika (2016) Effect Of Chilled Air Coolant On Surface Roughness And Tool Wear When Machining 2205 Duplex Stainless Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hashimah, Hassan (2010) Performance Study Of Voice Over Internet Protocol In Mobile IP v6. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hasil Adha, Haslan (2008) Evaluation Performance Of Louvered-Fin Compact Heat Exchanger. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Haslam, Hasan (2005) Merekabentuk Penapis Untuk Sistem Satu Fasa Bagi Menukarkan Arus Ulang-Alik Kepada Arus Terus. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Haslina, Mohammad (2009) Productivity Improvement Using Work Study Assessment At A Communication Manufacturing Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Haslina, Zakaria (2011) Temperature Monitoring System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Haslini, Che Harun (2006) Wireless Captive Portal For FTMK Network. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Hasmaddy, Wentwes (2015) Evaluation Of Radio Frequency Interference (RFI) On Global Navigation Satellite System (GNSS) Signals. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hasmel , Nazray (2008) Design And Development Chassis For The Fire Fighting Vehicle. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Hasminda, Hassan (2009) Vacuum Packer For Small And Medium Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hasmiza, Muhammad Hasim (2006) Insect Inspired Six-Legged Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hasnah, Haron (2005) Training Module For Motors For Mechatronic System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hasnida, Said (2005) Blood Transportation For Biology Courseware. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hasnieza, Mokhtar (2005) Monitoring Attendance School Through SMS. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hasnizah , Geno (2005) Digital Audio Frequency Meter. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Hasoloan Haery, Ian Pieter and Mohd Yuhazri, Yaakob and Puvanasvaran, A. Perumal (2011) Developing A Cost Modeling Of Value Stream Mapping To Optimize Production System Operations By Using Graphical User Interface. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hasoloan Haery, Ian Pieter and Muhammad Yuhazri, Yaakob (2013) Developing A Function Deployment And Tool For Employees And Product Quality Satisfacti Through Kano Method And Herzberg Theory. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hasrul' Nisham, Rosly (2006) Design Of Multiple Differential Receiver For Wireless Personal Communication. Project Report. UTeM, Melaka. (Submitted)

Hassan, Rahman (2008) Generation Of High Voltage Impulse And Test On Insulator (Plywood). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hassan, Muhamad Haziq (2017) Acoustic Characteristic Of Pineapple Leaf Fiber. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hassan, Muhammad Faris (2017) Conceptual Design Of Drivetrain System For Beca Melaka. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hassan, Muhammad Shahirman (2017) Investigation On The Performance Mild Steel Impact Test Vibrational Analysis Using MATLAB. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hassan, Nur Hayati (2017) Performance Improvement Of Split Savonius Rotor By CFD. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hassan, Roslan (2017) Optimization Of Compression Molding Process For NR/EPDM Elastomeric Material. Technical Report. UTeM, Melaka. (Submitted)

Hassanudin, Jihad Salihin (2016) Development Of Automated River Trash Management System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hassanul Sazali , Ahmaddin (2007) Development Of CIM Control System Using PLC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hassyura , Harun (2008) Mobile Malaysian History Notes Using Mental Story - Malayan Union Kepada Pembentukan Persekutuan Tanah Melayu. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hawford Harold, Sinpong (2015) Risk Assessment On Combined Cycle Power Plant Mechanical Maintenanance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hayadi, Mustafa (2009) Development Of Self Siagnosis (SMART) Plant Using Sorting Plant System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hayom, Hifzhan (2016) PC-Based Heart Rate Monitor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hazali, Muhamad Shahrin (2015) Parametric Design And Analysis Of Automotive Suspension Coil Spring. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hazalifah , Zainal Abidin (2013) Tribological properties of waste vegetable oil biodiesel using-alkaline-based potassium hydroxide (KOH) catalyst. Project Report. UTeM, Melaka. (Submitted)

Hazi Haslinda, Usolludin (2011) Productivity Improvement Analysis At Mushroom Industry Using Time Study Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Haziezol Helmi , Mohd Yusof (2005) Smart Charger With Auto Power Shut-Off. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hazila , Nayan (2007) Analysis Of The Performance Of A Combustion Chamber Gas Turbine. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Hazimin , Hamdan (2008) Kuala Lumpur Rail Network Integration : Interactive Web Based System Using Treemap Information Visualization Representation (Klrail Mobile System). Project Report. UTeM, Melaka,Malaysia. (Submitted)

Hazirah, Zakaria (2014) Face Recognition Using Eigenfaces Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hazizi, Muhammad Zharif Syafiq (2016) Notable Fiber Optic Sensor Development For Petrol Oil Detection Base On Time Frame Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hazli Rafis, Abdul Rahim (2005) Rekabentuk Pengawal Kelajuan Motor Arus Terus Menggunakan PIC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hazman, Md Yusop@Yusof (2008) Design And Development Of Motorized Cold Air Intake System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hazman , Hasib (2006) Development Of Structuring Anthropometric Database. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Haznirah, Mohd Ghazali (2009) Discrimination Of Overcurrent And Earth Fault Of A Low Voltage System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hazrimi, Omar (2005) Design Of Driver Brushless Direct Current Motor (BLDC). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hazrul Fazrizal , Hilman (2010) Intelligent SpyCam With Robotic Arm (ISRA). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hazrullizam , Idris (2008) Development Of Tracking System Using RFID. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Hazura, Haroon and Fauziyah , Salehuddin and Niza, Mohd Idris (2007) Smart Laboratory Inventory Management (Slim) System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hazwan Hasif, Hamdan (2013) The Effect Of Crude Oil To The Corrosion Properties Of Petroleum Pipeline. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hazwan Rodzi , Ahmad Sapuan (2007) Automated Storage Retrieval System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hazwani, Hilmi (2013) Effect Of Mixing Ratio On The Mechanical Properties Of Polypropylene Composite. Project Report. UTeM, Melaka. (Submitted)

Hazwani , Badri (2011) Comparison On Traffic Pattern In Peer To Peer Network. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hazwani , Hatim (2007) Design Of A RF Wireless Headphones. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hee, Shieh Li (2013) Improving Sensing System For Mailbox Monitoring Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hee, Kee Ming (2015) Analysis Real Time Control Of Behavior Robot In Assiting Human In Cleaning Household. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Helya Syahida, Abu Zaki (2015) Develop An Intelligent Switching For Multisource For DC Motor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hemalatha, Apadore (2011) A Secured Biometric Attendance System (Thumsec System) With Access Lock Control. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hendra, Ruding (2009) Membangunkan Enjin Motosikal Menggunakan Bahan Api LPG. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Heng, Zheng Wang (2015) Fatigue And Fracture Behavior Of Al-Alloy Plates With U And V Notches Subjected To Fatigue Loadings. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Herawati , Hardi (2007) Sistem Pensuisan Pengecaman Alunan Berbilang Audio. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Herman, Md Azhari (2005) Design And Implementation Of Gripper And Robot Arm (Hardware Development). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Herman , Edmeades (2008) Fabricating A Car's Radiator. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Hew, Wai Onn (2008) Microprocessor Based 3-Phase Six-Step Vsi FED AC Motor Drive Based On Rabbit Microprocessor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hew, Khai Sheng (2018) Dynamic Stability On Lateral Directional Of An Aircraft Using Aileron. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hidayat, Zainuddin (2009) Design Of Micro Hydro Turbine From House Tank Water For Home Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hidayatullah , Musa (2008) Study The Process Of Total Preventive Maintenance (TPM) Of Injection Moulding Machine Arbug 420C. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Hilmi Safuan, Japar (2010) Aerodynamic Study Of Heavy Truck Using CFD Fluent. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hilton, Smith Judan (2007) An Alternative Technique To Map Noise Exposure And Prediction Of Noise Levels In Industri Compliance To Noise Exposure Regulations 1989. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hindustan, Imran and Kok, Swee Leong and Md Saat, Mohd Shakir and Osman, Khairuddin and Abdul Rahman, Farah Khalidah (2017) A New Approach Of Designing A Self-Tunable Power Converter For Acoustic Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hisham, Nur Syahirah Syafiqah (2016) Optimization Of Fiber Optic Acetone Sensor By Using Taguchi Method For Diabetics. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hisham , Abd Aziz (2006) Stepper Motor Controller Using PIC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hishamuddin, Muhammad Amir 'Afifi (2016) Indoor Air Quality Of Classroom (Level 1) Of Faculty Of Mechanical Engineering. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hithayatullah, Muhammed Fayazullah (2016) Smart Gas Leakage Alert System Using Global System For Mobile With A Short Message. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hizzi, Hamzah (2009) Water Reservation Control Based On Wireless Sensor Network. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hj Mortadha, Noor Mirza Syamimi (2017) Design, Analysis And Development Of Tennis Ball Collector Machine. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hj Wan Zainul Abidin, Wan Nur Shuhada Annis (2017) Design And Develop A Stair Climber Trolley. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ho, Bee Kim (2012) Effect Of Filter Unit Back Pressure To The Water Hydraulic System Pump Performance - 24 Pages. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ho, Tze Yuan (2008) A New Procedure For High Frequency Electronic Ballast Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ho, Carl Choon (2015) Development Of Remotely-Controlled Home Monitoring Mobile Robot With Camera For Human Aids. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ho, Joo Jie (2018) Design And Development Of System On Chip For Smart Sign Language Translator Glove. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ho, Shu Mei (2011) Analysis And Measurement Of Alignment And Tracking Method Of Earth Station Antenna In Satellite Communication System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ho, Wen Quan (2016) Piezoelectric Based Self-Powered Force Detection System With Wireless Communication. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ho, Yih Hwa and Muhammad Syahrir, Johal (2005) Ionospheric Scintillation Monitoring. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ho , Fu Yeap (2008) Robot Worm. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ho , Pak Yen (2010) Dynamic Website For Online News Publisher (DWONP). Project Report. UTeM, Melaka,Malaysia. (Submitted)

Hod Salleh , Amran (2009) Autonomous Display Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hoe, Li Sim (2010) Design And Analysis Of Casting Mold Using CAD Tool. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hoh , Song En (2004) Network Alarm Reporting System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hon, Yeen Seong (2009) Microprocessor Based Dot Matrix LED Display System For Pedestrian Light. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hong, Mun Hoh (2017) Development Of an Automated CFD-BASED Optimization Workflow For Automotive Aerodynamic Application. Project Report. UTeM, Melaka. (Submitted)

Hong, Tzy Yi (2018) Analysis Of Woven Fabric Characteristics For Composite Reinforcement. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hong, Zhi Xuan (2017) The Planning Of Handover In 5g Technology. Project Report. UTeM, Melaka. (Submitted)

Hoo, Jian Ea (2014) Design And Development Of Road Surface To Camera Image Plane Estimation System For Object Measurement. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hoo , Lien Tien (2007) Design On CIM Workstation System - LCD Monitor Back Cover Assembly Station. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hor, Woei Tsong (2018) Geometric Optimization Of LED Heat Sink For Cooling Of LED Lighting. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

How, Shu Wen (2012) Centralized Water Distribution Control And Monitoring System Using Scada. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hu, Zhen Han (2016) The Development Of Data Acquisition System Using Arduino And MATLAB. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hulamri, Omar (2015) Development Of Domestic Renewable Energy Using Windbelt Generator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Humesan , Shanmugam (2008) Automatic Radio Frequency Controlled Object Chaser. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hurun Ain , Ab. Rahman (2008) Application Of Linear Programming In Industrial System: Distribution. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Husain, Nor Mazidah (2016) Electrical Vehicle Charging Through Inductive Power Transfer (IPT) System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Husaini, Abdullah (2008) A Precision Assembly In Plastic Injection Mould. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Husin, Hanaz (2018) Investigation On CNC Turning Parameters By Using A Vortex Tube Cooling System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Husin, Muhammad Syafiq (2016) Speed Limit Detection For Vehicle Using GSM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Husin, Nur Aqilah (2016) To Study The Development Of Reverse Engineering Technology That Using Common Consumer Electronic Device. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Husnul Hafiz, Ismail (2012) Merekabentuk Alatan Bagi Penyediaan Makanan Kucing Automatik. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hussain, Nadia (2017) Preliminary Study Of Mechanical Properties For Composite Reinforce Pineapple Leaf Fibre Through Impact Tensile And Torsion Test. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hussain, Noor Wahidayu (2012) Pembuatan Dan Karakterisasi Kitosan Dari Sisa Kulit Udang Dan Cengkerang Ketam. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hussairi , Borhan (2007) Design And Modeling Of Temperature Control System For House Ventilation System Using MATLAB/SIMULINK. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hussein, Nur Izan Syahriah and Ayof, Mohd Nizam and Abdullah, Abu and Abu Bakar, Mohd Hadzley and Shamsuri, Siti Rahmah and Othman, Md Nazri (2017) Effect Of Deposition Process On Properties Of Nickel-Based Aloy Clad On Cast Iron Trim Cutter Mould. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Huzaifa, Musa (2010) Light Guided Path Tracker Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Huzairee, Abdul Halim (2013) Investigation Magnetic Field Radiated By 132 kV Overhead Transmission Line. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Huzamri, Mohd Sharimen Imran (2017) Reka Bentuk Model Sistem Pengudaraan Berkuasa Suria. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hwang, Tan King (2010) Surface Integrity Analysis In CNC Milling of 6061-T6 Aluminum Alloy. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hyreil Anuar, Kasdirin and Alias, Khamis and Muhammad Herman, Jamaluddin and Hairol Nizam, Mohd Shah (2009) Design and Development of a Compact Flying Robot Using Intelligent Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hyreil Anuar, Kasdirin and Syahrul Hisham, Mohamed (2009) Development Of An Intelligent Multi-Detect Surface Cleaner For Home Vacuum Appliances Using Hybrid Power Source. Project Report. UTeM, Melaka. Malaysia. (Submitted)

hassan, nurmala irdawaty (2009) Radio propagation measurement for broadband system. Project Report. Universiti Teknikal Malaysia Melaka. (Submitted)

I

Ian Divine , Hillary Bajau (2008) Small Scale Intelligent Vehicle. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Ibrahim, Talip (2011) A Simulation Study Of Railway Vehicle Dynamics Performance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ibrahim, Fatin Sujaihah (2014) UTeM Student Brand Preferences Towards Smartphone Purchasing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ibrahim, Noor Haya (2016) Preliminary Study On Elastic Profile Of Mix Coconut Fibre And Polyester Resin As Composite Fibre Substitution. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ibrahim, Siti Athirah Raihan (2016) Rear And Side Under Carriage Safety Bars For Malaysia Heavy Vehicles. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ibrahim, Siti Nur Ailisa (2017) Determination Of Clearance For The Design Of Bending Die For Looping A Cable Stayed Support Plate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ibrahim , Mohd Zulfadli (2008) Design And Implementation Of Smart Home Automation And Security System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ibrahim , Mazree (2009) Intelligent automatic car park system. Project Report. Universiti Teknikal Malaysia Melaka. (Submitted)

Ibtisam, A. Hamid (2015) Design And Implementation Of Intelligent Home And Electrical Appliances Control Using Android And Wifi Technology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ida Fairuz, Wahid (2015) A Study And Development Of Four Quadrant H-Bridge DC Motor Controller Using PIC18F4550. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ida Irmeelia , Daud (2009) E-Booking. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Ida Laila , Bakhtiar (2013) DFMA Analysis Of A Water Tank Cleaning Robot. Project Report. UTeM, Melaka. (Submitted)

Ida Syafiza, Md Isa (2013) Development Of New Arp Routing Protocol For Multihop Transmission In Ad Hoc IEEE 802.11 Networks. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Idawati , Hatib (2008) Design And Development Of PC Based Software For Time & Frequency Domain. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Idham, Ahmad (2008) Active Suspension System With State Feedback Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Idris, Saaran (2009) Design And Fabrication Of A Checking Fixture For A Press Part Component. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Idris, Asyran Ariff (2018) Fluid Properties Of Automotive Engine Cooling System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Idris, Maspin (2005) Ciri-Ciri Pemindahan Haba Bagi Aliran Tidak Mantap Pada Muncung Tersantak. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Idris, Mohamad Iqmal Faris (2017) Fatigue Strain Signal Behavior Of Automobile Suspension System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Idris, Norain and Zakaria, Muhammad Zulfattah and Ahmad, Umi Hayati and Mohd Yusof, Norfadzlia and Mohd Zain, Raeihah and Md Isa, Mohamed Hafiz (2017) Optimization Of Grain Size And Moisture Content Of Young Coconut Shell And Coir (YCSC) Using Cutting-Extracting-Drying Method For Pelletization Preparation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Idris, Nur Ilani (2017) Design And Analysis On Brake Disc Skimming Machine Holder With Transfer Gear. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Idris, Nurul Syazwani (2016) Multi-Objective Of Optimal Distribution Network Reconfiguration By Using Modified Artificial Bee Colony Alorithm. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Idris, Nurul Syazwani (2016) Multi-Objective Of Optimal Distribution Network Reconfiguration By Using Modified Artificial Bee Colony Alorithm. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Iek , Zen Jenm (2009) Bluetooth Broadcast Advertisement System. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Iffa Marina , Jopri (2013) Effect of heat treatment on the microstructures and mechanical properties of high carbon steel. Project Report. UTeM, Melaka. (Submitted)

Iffah Nafisah, Ibrahim (2015) Human Analysis And Ergonomics Of An Electric Bicycle Seating Posture. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ikhwan Hakim, Mat Idera (2012) Pembuka Nat Roda Kenderaan Daya Kilas Rendah. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ilham Hadi , Syahril (2013) Evaluation Of Dynamic Characteristics On PRT And Thermocouple Sensors In An Automated Temperature Calibration System. Project Report. UTeM, Melaka. (Submitted)

Ilime, Muhammad Iqbal (2016) Temperature Monitoring Of Water Pump Relative To The Effect Of Flowrate In Pipeline. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Illy Salwana, Abd Razak (2009) The Study Of Cylindrical Tube Under Quasi-Static Loading. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ilyana , Abdullah (2008) Autonomous Maintenance Programme On Grinding Machine For Job Base. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Ilyana , Mohamad Tajuddin (2010) Magnetic Levitation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Imi-Yanti , Yusoff (2006) The Suitability Of Wind Generated Power For Home Power Generation In Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Imran, Mohd Ibrahim and Abdul Rani, Othman (2009) 5.8 GHz Bandpass Filter and Power Divider for Front End Direct Conversion Receiver. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Imran, Mohd Ibrahim and Mohamad Zainol Abidin, Abd Aziz and Abd Shukur, Jaafar (2008) On The Design Fabrication And Measurement of Broadband Slot Array Antenna For A Broadband communication. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Imran, Mohd Ibrahim and Mohd. Nor, Husain (2010) Design And Development Of Low Cost Anechoic Chamber. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Imran, Mohd Ibrahim and Noor Azwan, Shairi (2010) Direct Conversion RF Front End Receiver for 5.8 GHZ WLAN Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Imran, Sutan Chairul (2008) Variable Speed Control Of 3 Phase Induction Motor (DL 1021) Using Inverter (ABB 550-01-08A8-4). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Imran Ariff , Mohamed (2010) GL System (Garbage Listing System). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Indera Kasuma, Mohamad Yunus (2012) The Study Of Metal-Filler On Graphite Polymer Composite. Project Report. UTeM, Melaka. (Submitted)

Indera Kasuma, Mohamad Yunus (2012) The Study Of Metal-Filler On Graphite Polymer Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Indra , Devi and Izaidin , Abd. Majid and Zanariah , Jano and Noraini , Husin (2009) The Effectiveness Of Teaching And Learning Technical Communication 1 (BLHW 2402). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Indra Putra, Ab Ghafar (2005) Pembinaan Perisian Bagi Talian Antara Muka Mesin Menggunakan Visual C++. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Intan Azmira, Abdul Razak and Mohd Shahrieel, Mohd Aras and Alias, Khamis and Aziah , Khamis and Elia Erwani, Hassan (2010) Short Term Load Forecasting With Artificial Neural Network. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Intan Baizura , Ahmad Tarmizi (2005) Vehicle Pre-Emptive System. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Intan Fatihah , Ahmad (2012) Impact Of Meeting Quality And Delivery On Customer Satisfaction For A Metal Based Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Intan Liyana, Ismail (2012) Manufacturing Process Selection For Automotive Bumper Fascia Using Analytical Hierarchy Process (AHP). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Intan Nadira , Abdullah Sani (2009) Voice Recognition Technology To Control Electronic/Electrical Appliances. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Intan Salafinas, Ahmad (2009) A Mechanical Study On Cocoa Husk – Glass Fibre/ Polypropylene (PP) Hybrid Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Irda, Roslan and Mohd Faizal, Abdollah and Shahrin, Sahib and Zurina, Sa'aya (2010) The Development of Resource Aware Middleware for Ad Hoc Wireless Network in a Collaborative Environment. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Irda, Roslan and Robiah , Yusof and Mohd Zaki, Mas'ud and Siti Rahayu, Selamat and Mohd Faizal, Abdollah (2010) Trace Map Model for Forensic Investigation Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Irmahida , Idris (2009) Implementation Of Radio Frequency Identification (RFID) In Attendance System. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Irshad, Ismail (2012) Modeling Stand Alone Photovoltaic-Wind Hybrid System For 100W Motor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Irwan, Saari (2013) Image Transmission Over Wireless Sensor Network (TEST BED ANALYSIS). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Irwan, Taib (2006) Line Balancing Optimization For Single Model Assembly Line. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Irwan , Mohamad Halim (2006) Simulation Modeling And Optimization In Manufacturing Case Study Shop Floor. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Irwan Shahnizam, Md Idris (2005) Computer Power Supply Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Irwan Syah, Saliza (2017) To Analyze Of Weather Seal Sound Transmission Loss By Acoustic Simulation Software. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Irwin, Bilun (2009) Temperature Control Using PIC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Irza Hafiza, Yaakub (2006) Performance Analysis Of VOIP Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Irzamir, Ismail (2005) 2D Cartoon-"Simple Life". Project Report. UTeM, Melaka, Malaysia. (Submitted)

Isa, Mohamed Azim Isam (2015) Novel Design An Indicator Of The Excessive Dust Particles Accumulation For The 1.0 HP Split Unit Air Conditioning. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Isa, Nur Afiffa (2017) A Fiber Optic Sensor On Alkaline Level Detection Using Beam-Through Technique. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Isa, Nur Aliah (2017) Simulating The Effects Of Grid-Connected PV System In A Residential Area Using OpenDSS. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Isa , Halim and Adi , Saptari and Muhammad Hafidz Fazli , Md Fauadi and Radin Zaid, Radin Umar and Tajul Ariffin, Abdullah (2008) Application Of Ergonomics Analysis And Quality Function Deployment (QFD) To Design A Materials Handling Device. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ishak, Khairul Faiz (2009) Study On Design Of Self-Cleaning Filtering Machine For Waste Water Treatment. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ishak, Mohd Amer Afiq (2008) Kawalan Motor Tetingkap Kuasa Untuk Kegunaan Menggenggam Dan Mengangkat. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ishak, Aliff Rahmani (2016) Design And Modelling Of Portable USB Charger Using DC Motor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ishak, Amru Shahril (2016) Wireless Phone Charger By Using Inductive Charging. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ishak, Mohd Ekmal (2009) Car Alarm System: Add On Module (Starter Module). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ishak, Mohd Ikhwan (2008) Noisee Exposure Level Monitoring In A Furniture Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ishak, Muhamad Shahrul Nadzrin (2018) Analysis Of Stiffness And Strength Of A Complex Topology Optimized Thermoplastic Part Designed For 3D Printing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ishak, Muhammad Ariff (2016) Biofuel Fire Starter From Empty Fruit Bunches Of Oil Palm Fruit Waste. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ishak, Nadiah (2017) Analysis Of The Influence Factors In Modelling The Energy Use In Factory 1,FTK Using Stepwise Multiple Regression. Project Report. Universiti Teknikal Malaysia Melaka, Melaka,Malaysia. (Submitted)

Ishak, Nor Shwazni (2017) The Effect Of Cooling Slope Casting On Microstructure And Mechanical Properties Of A319 Alloy After Processed By Equal Channel Angular Pressing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ishak, Nur Hafizah (2017) Microstructure Evolution And Mechanical Properties Of Rheocast A1-5Si-3Cu Alloy. Project Report. UTeM, Melaka. (Submitted)

Ishak, Syazwani (2017) Microstrip Array Antenna With AMC Structure At 28 Ghz For 5G Communication. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Iskandar, Meran (2009) Damage Initiation And Propagation Of Sandwich Composites Panel Under Compressive Loading. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Iskandar, Mizuar (2011) A Design Of A Book Rental System By Using RFID Tranceiver For 13.56 Mhz Frequency Range. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Iskandar, Muhammad Syafiq (2018) Development Of Innovative Self-Fabricate Contact Angle Measurement Tools For Hydrophobicity Analysis. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Iskandar Md Zainalabidin, Nur Alia Batrisyia (2018) Design And Characterization Of Strain Sensor For Landslide Early Warning Detection Via IoT Platform. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Isma Reza, Azmi (2006) Osiloskop Digital Dengan Menggunakan Komputer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ismadi , Bugis (2009) Development Of A Fully Automated Synchronization System For Distributed Generator. Project Report. UTeM, Melaka. Malaysia. (Submitted)

Ismail, Jaaffar (2013) Design The Auto Depth Control For Unmanned Underwater Vehicle Control Using Thruster System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ismail, Mohamad (2006) Flexible Electric Power Converter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ismail, Ihsan (2017) Design And Development Of Wireless Braking System For Motorcycle Helmet. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ismail, Mohamad Fathin (2016) Smart Care Plant Notification. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ismail, Mohammad Hanif (2017) Development Of Automatic Trip Monitoring System In Distribution Box Using Global System For Mobile Communication (GSM). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ismail, Mohd Khairuddin (2010) Gyroscope Implementation On Mobile Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ismail, Mohd Nor (2017) Temperature And Humidity Effect On Corrosion And Mechanical Properties Of Fences And Gates. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ismail, Muhammad Ashrafi (2016) Hybrid Vehicle (HV) Chassis Vibration Sources Detection And Identification Using Frequency Domain Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ismail, Muhammad Haziq (2016) Experimental Investigation Of Rear Sprocket Failure Of A Fixed Bicycle Using Acoustic Emission And Vibration Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ismail, Muhammad Syafwan (2016) Fall Detection And Alert System For Home Alone Elderly. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ismail, Nor Shahirah (2016) Design And Development Of Table Napkin Folding Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ismail, Norhazimi (2017) Power Factor Correction For Residential. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ismail, Nurfarah Izzati (2017) Development Of Crack On Composite Detection Sensor Using Magnetic Induction Concept. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ismail, Omar (2017) Tracking And Erosion Performance Of Silicone Rubber Under AC And DC Voltage. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ismail, Ruhaimee (2016) Portable Weather Monitoring System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ismail, Shahrul Azwan (2016) Comparisons Of Mechanical Properties Between Pure Polypropylene And Polypropylene Filled With Talc Using Single Gate And Twin Gate Mould. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ismail , Bolong (2009) Investigation On The Effect Of Heat Treatment On Fracture Toughness Of Pressure Vessel Steel. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Ismail , Ibrahim (2013) Motion And Time Study For Enhancing The Assembly Process At PHN Industry Sdn Bhd. Project Report. UTeM, Melaka. (Submitted)

Ismail , Rashid (2011) Design Improvement Of Solar Grass Cutter Using DFMA Methodology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ismail , Yaakob (2007) Pemacu Motor Arus Terus Untuk Beban Minimum 5kg. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ismail , Najwa (2016) Development Of A Road Line Detection Algorithm For Monitoring Driving Pattern. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ismaniza, Ismail (2008) Study On The Performance Of Carbon Adsorbent In LPG Tank Small Engine Fuelled By LPG. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ismatuzzulfa, Shahrowardi (2013) Compact Dual Band FSS For Microwave Transmission. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Iswaji, Ahmadee Abunur (2016) Development Of Transport Information System Using Push Notification. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Iylia Shaleen , Ismail (2010) Short Messaging System (SMS) Reminder For Car Alarm Alert System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Iyyduroo, Mohd Sulaiman (2015) Development Of Car Safety System Via SMS. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Izahar, Adam (2017) Water Quality Sensor Development And Wireless Monitoring Using Arduino. Project Report. UTeM, Melaka. (Submitted)

Izal Firdaus, Ishak (2011) Smart Control Ventilation For Room. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Izan Afzan, Salamat (2007) Meander Line Antenna Design For WLAN Application. Project Report. UTeM, Melaka. (Submitted)

Izan Shukrizal, Shukor (2008) Penyediaan Serbuk Hidroksiapatit Melalui Teknik Sol Gel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Izhar Hifnie, Mohd. Amin (2009) Design And Analyze The Chassis Of An Electric Vehicle For Use In Campus Condition. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Izni Hidayah, Mohamed Asri (2013) A Study Of Car’s Profile Design Using Boxfish’s Aerodynamic Concept. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Izuwati, Abd Razak (2008) Development Of Flood Early Warning System At Taman Merdeka, Batu Berendam, Melaka. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Izyan Fairuz, Md Rasid (2009) Analysis Of The Stress-Strain Behaviour Of Beam For Different Type Of Cross-Section And Material. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Izzad Amir, Abdul Karim (2012) The Effect Of Coconut Waste On Concrete Structure Component. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Izzad Jauhari , Sarlan (2009) Stamping Oil Conditioning Monitoring At Miyazu Using FT-Ir : Water Peak Monitoring For Line J. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Izzaidi Fairus, Ismail (2008) Design Of Chemical Mixer Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Izzat, Akmal Shariff (2014) Hexapod Controller Using Microprocessor Core In FPGA. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Izzat Afandi , Mohad Kamil (2011) High Sensitivity Audio Receiver. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Izzat Aminudin, Mohamad Salji (2015) Development Of An Interactive System Using Voice Processor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Izzat Safuan, Arif (2010) Effect Of Variation Of Construction Materials On Thermal Comfort Using CFD Simulation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Izzati, Izman (2011) A Study On Decision Scenario Of Turnaround Days Of Preventive Maintenance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Izzuan, Ahmad (2012) The Error Compensation Strategy Using Step Approach For Machining Thin-Wall Low Rigidity Component. Project Report. UTeM, Melaka, Malaysia. (Submitted)

J

Ja'afar, Muhammad Waris (2016) Optimization Of Biodiesel Production From The Waste Cooking Oil Using Response Surface Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ja'alam, Mohd Azhar (2010) Kajian Sistem Tadahan Hujan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jaafar, Mohammad Zarul Amir (2017) Development Water Billing System By Using Arduino. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Jaafar , Diyana Zahirah (2010) Multi-Purpose Hybrid Power Supply. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jaafar Sidek, Mohd Ani (2005) Application Quality Function Deployment (QFD) On Manual Wheelchair. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jacob, Lisa Matius (2016) Development Of Vacuum Clamping For Milling Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jacynta Jane, Peter (2005) The Life In Orphanage A Study Of Foley Artist In Sound Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jafri, Jamaludin (2008) Effects Of Fiber Size Modification On The Mechanical Properties Of Kenaf Fiber Reinforced Polyester Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jahari, Nor Hidayah (2017) Tool Wear And Wear Progression Of Uncoated Carbide In Turning Titanium Alloy Ti-6AI-4V ELI Under Vegetable Oil Based Carbon Nano Fiber. Technical Report. UTeM, Melaka. (Submitted)

Jai Kanth, Rajalingam (2005) Potential Of Inducing Natural Ventilation For Low Rised House Under Tropical Climate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jaiban, Floriena Erika (2017) Future Of Manufacturing : A Study On The Front-End Requirements Of Industrie 4.0 In Malaysia. Project Report. UTeM, Melaka. (Submitted)

Jalil, Muhamad Suhaimi (2017) Development Of Portable Magnetic Clamping. Project Report. UTeM, Melaka. (Submitted)

Jallil, Nurul Amirah (2017) Design Of A Corner Chair To Ease The Daily Routine Of Cerebral Palsy Kids. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jamal, Tukiman (2008) The Adoption And Implementation Of Best Practice In Biotech Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jamal Hussein, Jaavith Nazeem (2017) Remote-Controlled Electro-Pneumatic Actuator For Remote Response Unit. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jamal Zabidi, Puteri Amirah (2018) The Characterization Of Fuel Injector System For Automotive Technology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jamalludin, Farhan Ismat (2016) Examining The Impact Of Firm's Socio Technical System And Organization Culture On Shift Work Problem In Manufacturing Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jamalludin, Muhammad Rizuwan (2018) Integration Of Topology Optimization And 3D Printer In Designing A Bicycle Structure. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Jamaluddin, Muhammad Hakim (2018) The Investigation Of Microcontroller Based Aquaponics Control Systems. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jamaludin, Abdullah (2010) Skuter Elektrik Boleh Lipat Menggunakan Hab Motor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jamaludin, Mohamad Faizal (2010) Investigation On Feasible Materials And Methods For Inducing Natural Dehumidification In Tropical Living Room. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jamaludin, Muhamad Fadhil (2015) The Design Of Portable Hexagon Chicken Brooder That Provide Best Thermal Comfort For The Chicks. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jamaludin, Muhammad Izzul (2017) Development Of Ultrasonic Assisted Compression Moulding Mould. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jamaludin, Muhammad Luqman (2016) FTK Emergency Light Monitoring System Using Wifi. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jamaludin, Nurul Izati (2016) Fiber Optic Sensor Of Glucose Level Detection For Various Bicarbonate Drink. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jamalussaid, Abdul Qahir Wahidi (2016) Establishment Of Standard Cycle Time And Production Target For The Manufacturing Of Telekom Malaysia Berhad (TM) Metal-Based Products. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jamarizan , Mohd Isa (2008) Design And Development Of Locking Device For Proton Waja Glove Box. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jamel, Muhammad Shazni (2017) The Development Of Prototype Of Automatic Windshield Wiper. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jamiatul Adawiah , Ab. Sidek (2013) Heat transfer characteristics of a heat exchanger. Project Report. UTeM, Melaka. (Submitted)

Jamieshah , Jamil (2010) Design And Analysis KR-150 Go-Kart. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jamil, Mohamad Hafiz (2017) Effect Of Fabric Covers On Improving Sound Absorption. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jamil, Noor Afizah (2017) Characterization Of Continuous Pineapple Leaf Fibre Reinforced Polylatic Acid Composite. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Jamil, Nur Zahira (2017) Implementation Of Digital Filter For Pre Processing Of Lightning Detection And Monitoring System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Jamingon, Nur Afiqah (2018) Validity And Reliability Of 3D Camera Body Scanning Anthropometric Measurement System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jaminih, Bruce Carl (2009) Implementation Of DHCP In The IPV6 And IPV4 Network. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Jamri, Aisyah (2018) Quality Improvement Of Al Machining Under CNC Automated Coolant Supply. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jamri , Mohd Saifuzam (2007) Robot Kawalan Jauh Pelbagai Frekuensi "Multi Frequency RC Robot'. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jamunarani, Muthusamy (2007) The Minkowski Fractal Patch Antenna For GPS And ISM Band Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Janisa , Aldean (2013) Total Design Of A Portable Automation Training Kit. Project Report. UTeM, Melaka. (Submitted)

Jannatunnaim , Harun (2008) Design And Modeling Of Multiple Tank Control For Fluid Circulation System Using PI,PD & PID Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jasmee, Solehah (2016) Design And Fabrication Of Vibration Experimental Test Rig For Teaching And Learning. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Jasmi, Md Nur Ariff (2016) Development Of Conveyor Tower Light Alarm Signal And Monitoring System In Factory Using LabVIEW. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jasni, Burhanuddin Helmy (2016) Design Low-Cost Sensor For Bluetooth Embedded System To Monitor Body Posture During Workout Using Arduino. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jasni, Mohammad Hasrudzi (2017) Kajian Reka Bentuk Pada Struktur Mesin Penyiring Cakera Brek (UTeM). Project Report. UTeM, Melaka. (Submitted)

Jaspal, Singh (2012) Development Of Smart Driver For Led Street Lighting. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jasrulnizam , Jamaludin (2005) Distance Protection Scheme And Coordination For Transmission Line. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jaya Kumar, Yogan and Goh, Ong Sing and Muda , Azah Kamilah and Choo, Yun Huoy and Mohamad Jaya, Abdul Syukor and Ahmad Kamil, Muhd. Azhari (2018) Enhanced Sentence Extraction Through Neuro-Fuzzy Technique For Text Document Summarization. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Jeeva, Kumar (2013) Investigate Android Malware’s Behaviour Through Dynamic Analysis (Anserverbot). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jeevaanand, Ramanathan (2005) Irreversibility Factors Of Refrigeration System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jeevintharan, Sivasankaran (2010) Design Of Experiment (DOE) Based Response Prediction In Machining. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jenal, Ruztamreen and Muhammad, Nor Salim and Mohamed Nor, Mohd Khairi and Abdullah, Zulkeflee (2017) Effect Of Steel Bars, Aggregates, And Multilayer In Reinforce Concrete Structure On Acoustic Wave Propagation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jernnetly, Jim Santos (2015) Analysis And Simulation Of Service Quality Enhancement By Applying Radio Over Fiber (ROF) In Communication Link. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jhonathan , Mark Danker (2006) Micromouse : An Autonomous Maze Solving Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jitvinder, Dev Singh (2010) Applying Speech Recognition System In Learning Basic Arabic Language. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Joe, Clario (2018) Investigation On The Peer-To-Peer Connectivity Of Short Range Devices. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Joehan, Ariff Ismail (2012) Design And Fabricate An Ergonomics Cockpit For Single Seater Formula Varsity Electric Racing Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Joel, Ting Tiew Hwong (2009) Smart Monitoring Lighting Control System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Johan, Muhammad Naiem (2017) Study Of Mechanical Properties On Fiberglass Reinforced Plastic Pipe Under Tensile And Bending Condition. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Johar, Ahmad Mustaqim (2017) Study On Ultra Capacitor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Johar, Ameer Hafetz (2016) Fatigue Analysis On Centrifugal Wheel Component Of Automatic Blasting Machine. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Johar, Hafizuddin (2017) Design And Development Of A Smart Home Power Monitoring System For Energy Awareness Using Arduino. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Johari, Norhasnira (2008) Noise Measurement And Prediction In Residential Areas Near Batu Berendam Airport. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Johari, Ahmad Fairuz (2018) Investigation Of Kinematic Model For Khepera III Mobile Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Johari, Juhaidah (2009) Development Of Scada For Servo Controlled Pick And Place System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Johari, Mohammad Nazrin (2016) Optimization Process Of T-Shaped Microstrip Antenna Performance For Broadband. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Johari, Mohd Nur Fitri (2017) Study For The Effect Of Blowing Direction On Heat Transfer Of Cooling Tube By CFD Simulation And Experimental Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Johari, Muhamad Hatim (2017) Development Of The Detection Motorcycle Location Using GPS And GSM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Johari, Muhammad Izamudin (2016) Design And Development Of Home Based Solid Waste Incinerator. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Johari, Nursharul Mukhzir (2017) Design Of Wide-Band Monopole Antenna For Indoor Multi-Operations Applications. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Johari Faisal Stephen, Amirah Afina (2017) Analysis Of Dimensional Accuracy And Surface Finish Performance For A 3D Printer Based On FDM Technique. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Jordan, Keith Ogak (2013) Finite element simulation of a rolling process of aluminium. Project Report. UTeM, Melaka. (Submitted)

Joseph, Tiong King Ing (2010) Experimental Investigation Of Bamboo-Filled Aluminium Tube Subjected To Quasi-Static Loading. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Joseph, Victor (2017) Development Of Integreted RF Rectifier And Power Storage For Portable Charging System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Joseph Rangga , Lium (2013) Design Improvements On Small Scale Production System. Project Report. UTeM, Melaka. (Submitted)

Josphene, J Endam (2005) Three-Phase 115-203V, 0.5HP Variable Speed Motor Drives Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Joye, Ter Ji-Xi (2013) Object Locator For People With Dementia (DEMICATOR). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Juani Eyat, Ju Leng Jun (2013) Teaching Autism Kids Good Behavior Using 2D Animation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Juari, Ab. Razak (2003) Development Of A Generic Step - Based Product Data Models In CIM Integration Framework For CAPP. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jufarina, Jolkipli (2008) Sudoku Unit. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jufarina , Jolkipli (2008) Sudoku Unit. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Juffri, Isma Qamar Ammar (2018) Investigation Of Different Array Arrangement Of Microstrip Patch Antenna And It Performance At 28 GHz Frequency. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Juffrizal, Karjanto (2014) The Development Of An Active Grease Trap For Domestic Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Juhari, Ab. Razak (2013) Optimization Of Cross - Flow Turbine For Pico - Hydro System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Juleza , Zakaria (2010) Oil Palm Empty Fruit Bunch (EFB) Fiber Brick Block. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Julia, Abu Bakar (2009) Identification Of Cascade Control DC Motor System Using Neural Network. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Juliana, Yaakub (2012) Reclamation Of Aerospace-Grade Carbon Fibre Prepreg Waste Through Second Impregnation Of Thermoset Polymer Via Hand Lay-Up Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Juliana , Abdul Rahim (2011) A Single Broadband Antenna The Log Periodic Antenna. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Juliana , Mohd Salleh (2012) Robot Simulation For Human Behaviour (In Team Of Attitude And Discipline). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Julie Aidah, Jusin (2012) Automated Guided Vehicle(AGV). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Julita , Ali (2009) Electronic Lock Using Signature Verification. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Junaidah, Muhamad (2006) Leased Circuit Maintenance Data System For Telekom KB. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Junaidi, Noor Juliza (2016) Studies On Surface Cleaning Method For Best Strenght Of Spot Welding. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Junainah , Leman (2008) Digital Instrument Display For Cars. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Junaini , Abdull Kadir (2007) Mekanisma Dan Kawalan Menyeberang Bagi Roboclimb. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Junazman, Mat Jusoh (2005) Sound Control Electronic System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Junis, Jacky Even (2015) Android Based Home Security System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Juriani , Johor (2007) ICT Portal For Labuan Corporation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jurifa , Mat Lazi (2009) Design And Develop A Power Over Ethernet. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jurifa , Mat Lazi and Aiza Fazliana, Abdul Kadir and Auzani , Jidin and Abdul Rahim, Abdullah (2005) Speed Drive Control System Of Single Phase Induction Motor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jurina, Buniran (2010) Automatic Juice Mixer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jusoh, Noor Muhammad Jamalluddin (2012) The Effect Of Aging Heat Treatment On Hardness And Mechanical Properties Of Aluminium Alloy. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jusoh, Ahmad Faizul (2017) Design And Development Of Portable Superbike Paddock Stand. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Jusoh, Ahmad Jazli (2016) The Study Of Effect Of Engine Performance Using Different Fuel For Perodua Viva. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jusoh, Nur Ajeerah (2016) Study On Effect On Intake Air Filter System On Engine Performance On Naturally Aspirated Engine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Justin, Lasa (2009) Kajian Terhadap Kesesuaian Rekabentuk Pengewap Yang Digunakan Dalam Kenderaan LPG. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Justin, Looh (2009) Microcontroller Board For Robot Applications. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Juwahir, Eiddi Noor Azizi (2017) Experimental Investigation On Mechanical Properties Effect For New Composition Of Epoxy Resin Reinforced Kenaf Fiber Through Torsion And Impact Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Juwita, Mohd Sultan and Azahari, Salleh and Abd Shukur, Ja'afar (2010) Macrodiversity for Combating Shadowing Forward and Received Link. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Juzzairie , Mohd Nor (2007) Kawalan Pergerakan Kamera Menerusi Laman Web. Project Report. UTeM, Melaka, Malaysia. (Submitted)

K

K. Sharmila , Devi (2007) Network Analysis And Design Of Headquaters Of Tractors Malaysia Sdn Bhd. Project Report. Melaka, Malaysia, UTeM. (Submitted)

K.Mariappan, Selvakumar (2016) Application Of Distribution Automation System (DAS) For Low Voltage Substation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kabilah Amin, Yahya (2010) Design Of Multiband Electromagnetic Band Gap (EBG) Structure. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kadir Naina, Nur Shahirah (2018) Fused Deposition Modeling And Vapour Smoothing Process For Surface Finish Improvement Of Biomedical Implant Replicas. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kahar, Muhammad Addey (2016) Assessment On The Impact Of Distributed Generation On Grid's Power Factor Compensation By Using Power World Software. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kalaivani, Ramachandran (2013) Automated Control System For Tomato Plantation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kalam, Muhammad Faiz (2016) Design And Development Of Finger-Vein Capture Device Using Arduino Microcontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kam, Pei Yi (2009) Toughness Of Fibreglass Laminated Composites. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kamal , Muhammad Raini (2010) Study On Waste Wood As An Alternative Conservation Energy. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kamal , Khairul Anwar (2016) Development Of Android Application To Monitor Power Consumption. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kamal Ariffin, Nurul Atirah (2016) Physical And Mechanical Properties Of Polypropylene/Reclaimed Rubber Compound. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kamal Nor Azwan, Kamarudin (2009) Design Of Emergency Light and Alarm System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kamal Ruzuan, Mat Hussin (2009) An Investigation Of Motorcycle Disc Brake Rotor Using Finite Element Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kamal Syahidi, Kamaruddin (2009) Development Of Visualization System For Material Handling System Using Wonderware Intouch Software. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kamaldeen, Amir Farhan (2017) Evaluation Of Fuel Properties Behaviour Of Biodiesel From Different Oil Stock. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kamaleshvaran , Balakrishnan (2008) Design Of Biped Robot Model Controller. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Kamaliah Hanim , Samhudi Kamil (2008) FPGA Based Surveillance System. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Kamar, Nurul Zarifah (2017) Tribological Study Using Pin-On-Disc For Polypropylene At Different Carbon Fibers Filler Loading. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kamar Din, Tasnim (2016) Effect Of Carbon Nanofiber Nanofluid On Turning Of D2 Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kamarosshalina , Noh (2005) Integrating Spreadsheet Templates And Data Analysis Into Industrial Hydraulic Instruction. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kamaruddin, Mohamad Nasriq (2017) Real Time Face Recognition System For Automatic Door Access Control. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Kamaruddin, Muhammad Solehuddin (2017) Breakdown Voltage Of Polymeric Material Under Different Shape Of Electrode. Technical Report. UTeM, Melaka. (Submitted)

Kamaruddin, Muhammad Syahzani (2017) Determination Of Stalling Region For Specific Turbine Blade's Profile. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kamaruddin, Noor Fathin Nabila (2016) Distribution Network Reconfiguration (DNR) And Voltage Stability Analysis For Radial Distribution Network Using Improved Genetic Algorithm (IGA). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Kamaruddin, Noor Fathin Nabila (2016) Distribution Network Reconfiguration (DNR) And Voltage Stability Analysis For Radial Distribution Network Using Improved Genetic Algorithm (IGA). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Kamaruddin, Nurain (2017) Delmia Ergonomics Analysis On Wheelbarrow To Improve Ergonomics Factor. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Kamaruddin , Ain Zulaikha (2016) Smart Child Notification System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kamarudin, Ain Nurkamilia (2017) Study And Development On Pattern Classification System For Empty Fruit Bunch Based On The Age Profile Of Oil Palm (Elaeis Guineeniss) Trees. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kamarudin, Hanis Zafirah (2016) Design On Rainfall's Vibration Based Power Generation Module For Rural Area In Melaka. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kamarudin, Noor Atiqah Syahirah (2017) Lighting Strategy For Building Energy Saving Ground Floor Of Campus Technology Universiti Teknikal Malaysia Melaka, UTeM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kamarudin , Muhamad Ridzuan (2017) Smart Dustbin – Smart Garbage Monitoring System (IoT Based). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Kamarudzaman, Nurkhuratul Aini (2017) Development Of PID-PLC Based Control Strategy For Winder System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kamarul Anuar, Nur Liyana (2016) Piezoelectric Energy Harvesting Floor Mat. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kamarul Ariffin, Ruslani (2008) Merekabentuk Sistem Suspensi, Brek dan Sistem Roda Untuk Formula SAE. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kamarul Ariffin, Zakaria and Mohd Afzanizam, Mohd Rosli and Ahmad , Rivai (2009) Environmental Effects On Fibreglass Laminated Composites. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kamarul Ariffin , Abas (2007) Sistem Pengawasan Kualiti Kuasa Tiga Fasa. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kamarul Ariffin , Omar (2009) Fabrication Of UWB Bandpass Filter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kamarul Arifin, Khushairi (2008) Rhino Robot Following Light Controlled By PC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kamarul Hisyam , Muhamad (2013) Evaluation of diesel engine performance and emissions using blended biodiesel (waste chicken fat) and conventional diesel. Project Report. UTeM, Melaka. (Submitted)

Kamarul Iszuwandi , Subri (2007) Merekabentuk Prototaip Dan Membangunkan Lampu Isyarat Pintar Menggunakan PLC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kamarul Zaman, Mohamad Fahhim (2017) Development Of Humidity Controller Using Arduino. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Kamarularifin, Kamel (2007) Fabrikasi Dan Ujian Terhadap Model Bot Persiaran. Project Report. UTeM, Melaka. (Submitted)

Kamarulbahrin, Izlin Anne Kamelia (2017) Optical And Photoelectrochemical Studies Of Tungsten Diselenide (WSe2) Thin Films For Solar Panels. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kamarulhelmy , Talib (2013) Optimization Of Mechanical Coupling In Electric Vehicle (ev). Project Report. UTeM, Melaka. (Submitted)

Kamarulzaman, Muhammad Zahin (2018) Effects Of Annealing On Punches Head And The Repurcussion On The Product Lifecycle And Cost (UTeM). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kamaruzaman, Muhamad Fakri Hakim (2015) Design And Performance Analysis Of Solar Bicycle For A Sustainable Local Commute. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kamizi, Nursyafika (2017) Effect Of PLA As Bonding Agent On The Properties Of Pineapple Leaf Fibre-Starch Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kamrul Zaman, Nur Najwa Aqilah (2017) Formulation Of Green Printing Ink For Ceramic Subtrate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kanathasan, Vengadeshwaran (2017) Short Range Phased Array Radar System For Lightning Remote Sensing Application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Kanavati, Sivan@Sivaguru (2005) Developement Of Automatic Water Pump Control System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kandasamy, Vijindran (2005) The Development Of A Laboratory Scale Solar Water Heater. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kang , Wei Sheng (2013) Universal Remote Control For Home Appliance With Smartphone. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kaodawaton, Abd Malik (2013) The Interpretation Of Dissolved Gas Analysis (DGA) Using Fuzzy Logic. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kap Lork, Ng (2009) Real Time Clock System. Project Report. UTeM, Melaka. (Submitted)

Karami, Nur'ain Syamimi (2018) Formulation Of Maintenance Cost Forecasting Model At Pejabat Pembangunan Universiti Teknikal Malaysia Melaka (UTeM). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kartikesu, Vijayan (2013) The Design Of A Torque Feedback Controller Using PID Controller For An Upper Limb Robotic Arm. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kasim, Dr. Mohd Shahir and Saedon, Dr. Juri and Mohd Ariffin, Prof. Dr. Khairol Anuar and Md. Ali, Prof. Madya Dr. Mohd Amran and Raja Abdullah, Prof. Madya Dr. Raja Izamshah and Anand, Prof. Madya Dr. T. Joseph Sahaya and Sulaiman, Dr. Mohd Amri and Abu Bakar, Ir. Dr. Mohd Hadzley and Abdul Aziz, Dr. Mohd Sanusi and Mohd Zakaria, Muhammad Akmal and Harun, Nurul Hatiqah (2017) Cutting Parameter Optimization Of Hybrid Micro-Rotary Wire Electrical Discharge For Surgical Device Fabrication. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Kasim, Mohd Fahkri Allauddin (2016) Enhancement On The Overall Mechanism Of Smart Drying System For Clothes-Green Technology Adaptation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kasridona , Rully (2009) Statistical Analysis And Optimization Of 5.8 Ghz RF Amplifier. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kasturi, Permalu (2005) Adaptive Infinite Impulse Response (IIR) Filter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kaswadinata, Mohd Arifin (2012) An Improved Optical Communication System Using Fiber Bragg Grating In EDWA. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kaswady , Husman (2009) Analyze The Effect Of Depth Of Cut Towards Surface Roughness In Milling. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Katimin, Nornaziera (2017) Synthesis Of Aluminium Doped Zinc Oxide Thin Film Prepared Using Chemical Bath Deposition. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kauthar , Ahmad Tajudin (2009) A Study Of Flaw Entrapment Efficiency In Penetrant Testing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kazalmalik, Kamaruddin (2008) Network Traffic Analyzer In LAN (NTAL). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kee, Low Chit (2009) The Design And Development Of Pneumatic Impulse Rocket For Night Parachute Search Lighting. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kee, Soon Han (2008) Influence Of Processing Methods And Fiber Size On Rheological Properties Of Hybrid Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kee, Kai Hung (2016) Redesign Of Polar Cutting Workstation In Paper Cups Manufacturing Industry Using Ergonomics Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kee, Kuo Zhuan (2009) Improvement On Rotary Draw Tube Bending's Parameter By Design And Analysis Using FEA Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kee, Soek Fuan (2018) A Design Of Automated Surgical Illumination System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kee, Swee Yen (2012) System Integration Of PV In Malaysia Distribution Networks. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kee, Wan Xuan (2016) Monte Carlo Simulation Based Optimization For Product Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Keek, Joe Siang (2017) Development Of System Controller And Voice-Controlled Mobile Application To Control An Omni-Wheeled Mobile Robot. Project Report. UTeM, Melaka. (Submitted)

Kejanindran, Govindarajoo (2012) Comparison On The Microstructure And Hardness Of GTA Welding And GMA Welding Of Dual Phase Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kek, Zi Xiangg (2017) Improving Stock Record Accuracy Using Mobile Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kelvin, Theng Sern Lung (2012) A Study On 5 % And 10 % Bio-Blended Diesel Fuel Spray Deposition. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kemat, Siti Zuraiha (2016) Home Cooking Oil Filter Mechanism. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kendy, Maloi (2005) Design Of A Saturation Burst Generator For Pulse Programmer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Keng, Swee Hau (2007) The Significant Of Total Preventive Maintenance Implementation–Case Study. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Keng, Wei Pin (2011) New Design For Hot Water Storage System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kesavan, Asokkumaran (2010) Radio Frequency Identification (RFID) for Warehouse Management System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kevin , Jok Sageng (2007) Quality Study Of Parts Produced By 3D Printer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kew, Mun Yew (2013) Development of Glove Controlled Prosthetic Hand. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairil, Azman (2009) A Feasibility Study On Phototherapy Unit Powered By Solar Energy. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairil Aizatt , Mohammed (2008) Smart Energy Meter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairil Amri , Muhamad (2009) Low Cost Mp3 Player Using SD Card. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairil Anuar, Muhamad (2011) Study On The Heat Dissipation Properties On Palm Waste Brake PAD. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairil Anwar, Norliyana (2016) A Development Of Wind Turbine Generator Using Waste Energy For Domestic User. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairil Anwar , Sapeia (2007) Tracking Of Moving Robot By A Moving Robot Using Visual Information. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairil Azman, Md Akhir (2011) Real Time laser based Tomography For Pipeline Flow Measurement. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairil Azwa, Khairul (2015) Investigation Of Mechanical And Morphological Properties Of Spent Bleach Earth (SBE) Reinforced Glass Waste Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairil Izwan, Jasman (2009) High Voltage Testing: Insulation Characteristic For Different Types Of Woods. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairill Anuar, Sakan (2008) Reka Bentuk Struktur Rekreasi (Kajian Struktur Raket Tenis). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairizan , Hashim (2007) Development of Materials Handling Techniques for Occupational Health Improvement of Workers in Manufacturing Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairol Hafiz, Haris (2006) Design And Fabricate Mould System In Plastic Injection Moulding. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairol Helmi , Roslan (2009) Motor Drive For Induction Motor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairuddin, Osman and Ahmad Nizam, Mohd Jahari @ Mohd Johari and Khairul Azha, A.Aziz and Hazli Rafis, Abdul Rahim (2011) Industrial waste monitoring. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairuddin, Osman and Mohd. Shakir, Saat and Ahmad Sadhiqin, Mohd. Isira (2009) Cruise Controller System Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairuddin, Osman (2005) Design Of Smart Motor Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairuddin, Osman (2005) The Design Of Smart Motor Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairuddin , Mahalil (2008) Design And Development Of Seating Or Escalator For Double Storey House. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairul Abidin , Mohamad Yasim (2006) Design Inverter For Photovoltaic System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairul Afikh, Roslan (2009) Pick And Place Robot (Robotic Arm). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairul Aidil, Nordin (2010) Design And Analysis Of Optical Mouse Using Boothroyd Dewhurst DFMA Methodology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairul Akma, Omar (2015) Study On Physical Form Of Consumer Products In Product Designing Towards Brand Recognition. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairul Akmal, Abdul Rahman (2009) PC Based Controller For A New Aquarium System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairul Amri , Saleh (2008) Merekabentuk Pengawal Logik Fuzzy-Pi Bagi Sistem Tangki Berkembar. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairul Amzar , Mohd Kassim (2013) Design and fabrication of thrower mechanism for tennis ball machine. Project Report. UTeM, Melaka. (Submitted)

Khairul Anuar, Mohd Padzil (2010) Short Term Load Forecasting With Perceptron Artificial Neural Network. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairul Anuar, Ahmad (2009) An Investigation Of Turbine Blade Failure In Aircraft Turbine Engines. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairul Anuar , Juhari (2007) Control Of Robotic Arm Using Visual Basic And Pic Microcontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairul Anuar , Mohd Nor (2008) Quality Improvement Using Classical Method Concept In Injection Molding Manufacturing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairul Anuwar, Abu Kasim (2015) Development Of Silicon-On-Insulator (SOI) Trapezoidal Waveguide Using Anisotropic Wet Etching. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairul Anwar, Mohamad (2007) Rekabentuk 'Soft Starter' Untuk Motor AC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairul Anwar, Ibrahim and Farhan, Hanaffi (2014) Investigation Of Surface Tracking And Erosion Resistance Performance Monitoring And Optimization Of Solid Insulation Materials Under Electrical Stress & Environmental Contamination. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairul Ariffin, Md Shariff (2011) Non-Intrusive Liquid Level Detection System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairul Ashraf, Muhamad (2004) SRMKUTKM Portal. Project Report. UTeM, Melaka. (Submitted)

Khairul Ashriq, Ashruddin (2008) Control Of An Inverted Pendulum : Comparison Between Bode Plot Techniques And Root Locus Technique When applied To Lead / Lag Compensator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairul Azam, Buhari (2008) Productivity Improvement Through Line Balancing Method In Aerospace Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairul Azri, Azlan (2009) Development Of An Active Bumper System To Reduce Vehicle Crash Impact. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairul Azri, Mohamed Yusof (2008) Temperature Control Using Analogue Pid Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairul Edzuan Adha , Kamarudin (2005) Appropriate Selection Of An Insulator For 275kV Transmission Line. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairul Fadzli, Pathil (2011) Mobil Robot Following Obstacle Avoidance And Collision. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairul Fadzli, Pathil (2011) Mobile Robot Following Obstacle Avoidance And Collision. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairul Fadzly, Kushiar (2011) Pest Repeller System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairul Faizal , Abdul Kadir (2009) Indoor Radio Propagation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairul Fithri , Abdul Rashid (2006) Investigation Of Conventional Milling Machining To The Surface Roughness Condition. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairul Hadi, Khalid (2010) Analisis Dan Penilaian Geganti Arus Lebih Melawan Geganti Jarak Pada Talian Penghantaran Menggunakan Perisian Cape. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Khairul Hadi, Misri (2008) Laminar Flow In Rectangular Water-Cooled Minichannel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairul Hafiz, Megat Bohri (2011) Design And Analysis Of Muffler Of Car Exhaust System Based On Solidwork Express. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairul Hazwan, Abu Bakar (2009) Low-Cost Automatic Headlight Dimmer System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairul Hisyam , Muhamad (2006) Power Supply Control. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairul Idzham, Hasni (2008) Study On Fracture Toughness In Low Carbon Steel Using Compact Specimens With And Without Carburizing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairul Ihsan , Md Shaari (2010) Scaled Model Of A Ware Energy Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairul Izad, Jalil (2009) Analisis Hentaman Terhadap Komposit Diperkuat Gentian Kaca. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairul Izzat , Mohamad Sahimi (2008) Design Switch Mode Power Supply By Using Boost Converter Topology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairul Masri, Mohamad Hisham (2016) Modelling And Analysis An Overcurrent Protection In A Power System Netwrok Using PSCAD. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Khairul Masri, Mohamad Hisham (2016) Modelling And Analysis An Overcurrent Protection In A Power System Netwrok Using PSCAD. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Khairul Muid , Khalid (2008) Beamforming Network Design By Using Blass Matrix. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairul Najjib , Shokhaimi (2009) Study On Operating Engine Temperature In Relation With Engine Performance. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Khairul Nazemin, Mohd Yaaziz (2015) Integration Kano Model And Quality Function Deployment (QFD) Application For Design Improvement Of An Accessories Product Case Study: Umbrella. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairul Nizam, Kamaruddin (2013) Solar Tracker. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairul Nizam, Khalid (2008) Unit Kuasa Hidraulik Padat Boleh Ubah Kelajuan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairul Nizam, Zainuddin (2009) Effect Of Coating Condition On The Corrosion Properties Of Mild Steel Substrate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairul Ridza, Ramli (2012) Mechatronic System Educational Kit For Undergraduate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairul Ridzuan, Mohamad Zin (2009) Impulse Voltage Generator: Triggering Circuit. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairulannuar, Abdul Satar (2013) Parabolic Dish Stirling Engine With Single Axes Solar Tracker System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairulanuar, Zainuddin (2010) Programmable Arm Robot Manipulator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairulazdan, Nur Khairunisya (2016) Study And Analysis Of Cognitive Style Towards The Affective Design In Kansei Engineering. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairulhisyam, Jamel (2007) Development Of Automated Height Meaurement System (Software Development). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairulizani, Azman (2015) Virtual Testing Of Suspension Coil Spring Using FE Software. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairullah , Zulkepli (2007) Merekabentuk Sistem Pengawal Untuk Lampu Isyarat Menggunakan PLC & FLC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairun Anuar , Suleiman (2008) Develop And Monitor Chatting System For PKKT. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairun Nasuha, Ambar (2008) Study In The Effect Of Compatibilizer On The Properties Of Oil Palm Shell Powder Filled Polypropylene. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairun Nazihah , Khalid (2012) Corrosion Behavior Of TiAIBN, TiN And AIN Coating Produced By Magnetron Sputtering On Magnesium Substrate (Using Hank's Solution). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairunisyahira, Abd Ghani (2012) Form 5 Biology Subject Content : 3D Animation Of Transpiration In Plants. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairunnisa , Khadari (2008) Kinematic Analysis Of 6-Axis Comau Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairunnisak, Kamarozaman (2012) Design And Development Of Object Tracking System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairurazikin , Mukhtar (2010) Smart Hybrid System For Outdoor And Indoor Application (Solar Tracking System). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khalid, Khairul Syafiq (2009) Design And Commercialization Study Of Rainwater Harvesting System For Residential House In Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khalid, Mohd Syakirin (2016) Development Of Automotive Air Scoop Micro Turbine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khalid Husseine , Tuah (2006) Electromagnet Torch Light Design And Development. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Khalidah Nabila, Mohd Elias (2015) Remote Heart Rate Monitoring System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khalil Fashar , Zainudin (2008) Mereka Bentuk Mekanisme Penyejukan Udara Yang Mengurangkan Suhu Udara Dari Unit Penyejuk Udara. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khalil Rushdi, Abdul Ghafar (2013) Pressure Monitoring System Interfaced With Global System For Mobile Communication (GSM). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khalilah, Khalid (2015) The Development Of Newly Design Arrow For Slingshot Shooting. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khalis, Suhaimi (2011) Design And Fabrication Of An Upright With Brake Caliper Mounting For Formula Varsity Race Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khalit, Noor Ilani (2018) A Study On Enterprise Resource Planning (ERP) System Adoption Towards Increasing Productivity : Case Studies Of Three Manufacturing Industries. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Kharmizan , Japar (2007) Design Jigs And Fixture For Surface Grinding Long Part. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Khasim, Abdul Razak (2009) Smart Intelligent Parking. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khoo, Mun Choon (2008) High Performance Laser Drilling on Stainless Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khoo, Thean Heng (2013) Emergency Vehicle Siren Detection For Traffic Light Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khoo, Chin Wuen (2017) Development of sleep monitoring system to observe the effect of ambient condition toward the quality of sleep. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Khoo, Hui Yee (2015) Development Of Controller For Wireless Robotics Hand In Hazardous Environment. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khoo, Samson Hock Chye (2008) Design And Analysis Of Robot Gripper For 10 Kg Payload. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khoo , Boo Hock (2008) Security System With Can Bus Integration. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khor, Teik Lim (2008) Design And Development Of Safety Pedal Lock For Manual Gear's Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khor, Chee Iu (2015) The Application Of Oil Palm Fiber On Concrete Structure Materials. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khor, Hooi Khee (2013) Disturbance Observer-Based Motion Control Of Direct Drive Motors. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khor, Kell Nie (2011) Synthetic Hybrid Laminate Composite Using Polyester VIA Hand Lay Up For Hardboard Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khor, Mei Yin (2015) Air Flow And Temperature Distribution Analysis In An Air Conditioned Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khor, Ming En (2017) Smartphone-NFC based guard tour monitoring system for real time data recording (eSmartGuard). Project Report. UTeM, Melaka,Malaysia. (Submitted)

Khor , Han Wei (2010) Design And Analysis Of Offshore Wind Power Platform. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khosim, Muhammad Basiir (2016) Development Of Car Detection System Using Ultrasonic Sensing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khozari, Nur Jannah (2017) Morphological Study Using Optical Microscope Of Natural Rubber With Modified Tapioca Starch After Soil Burial Test. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khusyairi, Abd Aziz (2009) Unmanned Aerial Vehicle (UAV) Monitoring Surveillance System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kim , Ling Sheng (2008) Multi-Level Led Dot Matrix Display Panel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kimberly, Anding (2012) Distribution Generation Installation Of Kuching International Airport. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kindamas, Zackris (2016) Assessment Effect Of Commercial Oil Additives (COA) On Engine Lubricant For Four-Stroke Motorcycle Engine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

King, Ivy Chien Chien (2016) Optimization Of Injection Molding Process On Name Tag Plastic Product. Project Report. UTeM, Melaka, Malaysia. (Submitted)

King, Teck Wei (2017) Sustainable Interior Design On Residential Buildings For Eco-Lifestyle Enhancement. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Kinn Sheng, Vincent Yap (2016) Development And Analysis Of Head Tracking System For Robotic Wheelchair Control. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Kismera , Mohamed Amin (2013) Radiator cleaning equipment. Project Report. UTeM, Melaka. (Submitted)

Kjeldsen, Yusuf (2009) Comparison For Front Door Passenger Car With Local And Import Car Using Design For Manufacture And Assembly (DFMA) Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Koay, Soon Lee (2013) Investigating DroidKungfu4 Android Malware Behavior Through Dynamic Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Koay , Miin Huey (2008) Enhancing Malay-English Bidirectional Mobile Dictionary (Medict). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Koh, Choon Chieh (2006) Ergonomic Assessment In Manufacturing Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Koh, Eng Soon (2005) Development Of Electronic Counter For Multi-Storey Car Park Controlled By PLC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Koh, Aries Chin Chin (2015) Effects Of End Mill Helix Angle On Accuracy Of Thin-Walled Aluminium Ribs. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Koh, Jian Yang (2017) Experimental Evaluation Of Multifunctional Variable Refrigerant Flow (VRF) System In An Application Laboratory. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Koh, Sheng Yi (2017) Design A Low Cost Hair Dryer Using DFMA Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Koh, Wee Kian (2010) Fault Condition Monitoring By Using LabVIEW. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Koid, Shi Hong (2015) Study Of Airflow On The Fixed Horizontal Louvers Shading Device For Commercial Building. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kok, Ho Kiet (2008) Design Of PEM Fuel Cell Powered Lawn Mower. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kok, Fie Kie (2017) Formation Of Cobalt Coated TiO2 Nanotubes By Wet Impregnation. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Kok, Ho Kiet (2008) Design Of Pem Fuel Cell Powered Lawn Mower. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kok, Swee Leong (2013) Piezoelectric Sensing Application Focused On Accelerometer Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kok, Swee Leong (2013) Wireless Monitoring For Ambient Vibrations: Investigate Potential Ambient Vibration Source For Energy Harvesting. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kok , Swee Leong and Shafiul, Azam and Mohd Shahril Izuan, Mohd Zin (2005) Optical Waveguide Design And Fabrication. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kong, Feng Yuan (2012) Synthesis Of Microwave Filter With Finite Dissipative Loss. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kong, Mei Yong (2005) Floor Covering Analyzer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kong, Teck Long (2012) Design And Develop Wireless Type To Control The Vibration Motor For My 2nd Eye Extended. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kong, Wei Shen (2013) Design And Fabrication Of A Reduced Scale Tire Test Machine. Project Report. UTeM, Melaka. (Submitted)

Kong, Ching Yee (2017) Design Of Cooling System For Two Plate Mould. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Kong, Jedediah Meng Hoi (2017) Drag Coefficient Reduction Of A 30° Yaw Angle Cube Subjected To Active Flow Control Device By Means Of Numerical Investigation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kong, Learn Fei (2011) Finite Element Analysis Of Tyre Using Eulerian Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kong, Mun Fun (2005) Micro-Controller Implementation Of A Line Following Mobile Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kong , Pei Rou (2005) E-Ballot Using Identity Based Encryption. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Koo, Ming Ciat (2016) Portable Dual-Axis Solar Tracking System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kooh, Chu Aik (2017) Controller Design Of A Two-Wheeled Self Balancing Mobile Robot Base On A Simulation View Point. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Koshila Devi, Sivakumar (2016) Degradation behavior of pineapple leaf fibre (PALF) reinforced biocomposites. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Kow, Kok Lim (2013) Development Of Active Suspension For Passenger Car. Project Report. UTeM, Melaka. (Submitted)

Kristy Elity , Sulaiman (2009) File Transfer System. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Kriteevasan , Aramugam (2010) Hardware For Optimization Of Hardware Platform For Wireless Sensor Network. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ku Abd Rahim, Ku Raihah Saiyidah (2016) Application Of Fibre Optic Sensor (FOS) For Various Cooking Oil Concentration Detection. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ku Norfafarina, Ku Osman (2011) The Design/Analysis Of Optoelectronic pH Meter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kua, Ning Way (2018) Integrated Overall Performance Effectiveness (OPE) And Simulation For Flexibility Enhancement During Changeover In Production Assembly Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kuah, Chuen Tse (2008) Design Of Automotive Parts For 5 Axis Milling Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kudus, Noor Masdalina (2018) The Analysis Of Quality Of Service (QoS) In WiFi, WiMAX And LTE Network. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kueh , Florence Hui Na (2012) Hardness Variation Of Heat Treated Layer-By-Layer Deposited Nickel Based Alloy. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kuek, Soo Fang (2015) Design Of Wide-Band Bandpass Filter With Tunable Notch Response Of Wireless Communication System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kui , Chu Siong (2011) Conceptualizing Energy Saving Motor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kumaresan, Magaswaran (2010) A Study Of Windshield Automotive Wiper Noise And Vibration Using Finite Element (FE) Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kusnan, Nur Izzati (2017) Preliminary Study On Effect Of Temperature On Hydrophobic Coating On Metal. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kusnan, Siti Zubaidah (2014) The Impacts Of Seven Waste Program Towards Manufacturing Industry Performance : A Study At Texas Instrument Electronic Melaka. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kuwn, Yew Ching (2008) The Impact And Flexural Study Of The Polymeric Biocomposite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kwan, Chin Seng (2012) Optimization Of Machining Parameters In Wire EDM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kwan, Wai Loon (2010) Mechanical And Thermal Properties Of Intermetallic Ni3Al For Automotive Body Applications. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kwan, Lik Hou (2015) Developing A Finger-Vein Capturing Device. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kwan , Swee Yee (2010) Star LRT Guideline Using Speech Recognition. Project Report. UTeM, Melaka,Malaysia. (Submitted)

L

Lai, Ching Huat (2012) Prototype Of Power Line Interface Socket Using Embedded Controller For Data Acquisition And Control. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lai, Qili (2013) Development Of Four Wheel Steering For Vehicle Handling Enhancement. Project Report. UTeM, Melaka. (Submitted)

Lai, Chii Chung (2016) Effect Of Surface Functionalization By Naoh On Electrophoretic Deposition Of H-BN Particles. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lai, Moon Chin (2017) Design And Development Of Internet Of Things (IoT) Enabled Wheelchair Inclination And Geolocation For Wheeler Rehabilitation Fitness Assessment. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lai, Wei Wein (2015) Motion Simulation Analysis Of Portable Accumulator For Domestic Water System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lai, Xingren Kathleen (2017) The Development Of Wireless Power Transfer Technologies For Multiple Devices An Inductive Approach. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lai, Yan Ling (2017) Ergonomics Intervention To Improve Plastic Roll Handling Process At Production Area In Plastic Manufacturing Industry. Project Report. UTeM, Melaka. (Submitted)

Lai, Ying Chau (2017) Design And Development Of Convolutional Neural Network (CNN) Enabled Smart Camera Based User Entrance Intention Detection System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lai , Chee Chun (2004) Mobile Photo Printing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lai , Kar Yee (2010) FTMK Exam Questions Management System Via Sms. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Laila , Ahmad (2007) Merekabentuk Pemegang Bekas Serbuk Untuk Mesin Tekan Berputar. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Laja , Supit (2008) Prismatic Lifter Robot By Using CPLD. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lam, Soon Teng (2008) Robust Gamelan Bonang Hammer Actuator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lam, Ying Ying (2016) Speech-To-Text Converter System For Teaching And Learning Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Larry Long, Yong Siang (2012) Effect Of Welding Current On Mechanical Properties Of Galvanized Chromided Steel Sheet In Resistance Spot Welding. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lasa, Norhazirah (2017) Establishing The Design Guideline Of Customized Insole Via Pressure Distribution Foot Planar Equipment. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lasunu, Kasmiah (2017) Wear Characteristics Of SK11 In Engine Oil And Nanoparticles-Enhanced Engine Oil. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Latif, Mohamad Ammar Faiz (2015) The Effect Of Cutting Parameter To The Hole Diameter Accuracy Of AISI D2 Tool Steel In Dry Drilling Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Latifah , Sulong (2007) Force / Torque Sensing Applied To Industrial Robotic Deburring. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Latip, Muhammad Fadhilullah (2016) Development Of Solar Powered System For Irrigation In Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Latip, Nur Amirah (2016) High Performance 3-Dimensional Waveguide Cavity Bandpass Filter Operates At 5.1 Ghz For Spectrum Analyzer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lau, Ley Lee (2011) Upgrading Performance Of Wireless Wind Sensor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lau, Siau Lek (2011) Enhancement The Performance Of Lighting And Ventilation System In Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lau, Ban Pin (2016) Lean Production Increase Overall Equipment Efficiency In Manufacturer Paper And Paper Product Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lau, Ghee Siang (2018) Development Of Automatic Home Plant Watering System Using Soil Moisture Sensing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lau, Kai Jun (2018) Enterprise Resources Planning (ERP) System Implementation - A Case Study In Yeong Chaur Shing Paper Mill Sdn Bhd. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lau, Khai Xin (2017) Duty Cycle Prediction Control Technique For A DC-DC Buck Converter Based On Dominant Poles Location. Project Report. UTeM, Melaka. (Submitted)

Lau, Kok Wei (2010) Computer Simulation On Circular Ring Subject To Lateral Compression, Quasi-Static Lateral. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lau, Sie Yee (2009) Fabrication Of Wood Plastic Composites From Lalang Grass And Polypropylene. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lau, Siew Joo (2010) Asset Tracking System (ATS). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lau, Why Chuong (2015) Leader Follower Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lau, Zi Hao (2018) Formulation Of Glass Ceramic Foam From Waste For Low Thermal Conductivity Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lau , Ong Yee (2008) Programming And Simulation Of An Arc Welding Robot. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Lau , Siew Joo (2010) Asset Tracking System (ATS). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lau , Kiew Siong (2014) DMAIC approach to improve equipment efficiency. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Law, Cheng Quan (2017) Investigation On Path Planning For Autonomous Mobile Robots In Partially Observable Environment. Technical Report. UTeM, Melaka. (Submitted)

Laxchumy, Saravanamuthu (2009) Developing Speed Control Application Using ABB Inverter (ABB 550-01-0BAB-4) For 3 Phase Induction Motor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lea, Hui Shan (2018) Development Of Acoustic Sensor Micro Bending Measurement System For Flexible Printed Circuit Board. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Leang, Suh Huah (2015) Production Process Simulation As A Decision Making Tool In Aggregate Planning. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Beng Choon (2008) Characterization Of Mechanical Propertise On Polystyren E/E-Glass In The Absence And Presence Of Charcoal Particles. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Bi Cheng (2012) Accelerometer 3D Based Motion Computer Control. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Jia Chang (2008) Simulation Of Cavitating Flow In Circulating Water Pumps In A Power Generation Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Kin Wai (2013) Electrical Power Consumption Monitoring System And Computing Simulator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Kok Tai (2013) Modeling, Simulation And Validation Of Reduced Scale Vehicle Dynamics Model. Project Report. UTeM, Melaka. (Submitted)

Lee, Mee Yee (2009) CC2430EM Application For Mobile Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Pei Chen (2009) An Application Of Sampling Method For Quality Control : Case Study On Roller Manufacturing Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Pei Pei (2010) Augmented UTeM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, She Jie (2008) Numerical Investigation On Rainfall Noise Intrusion And Prediction Of Rain Noise For Different Composite Roof Constructions. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Tain Sang (2005) Automated Guided Vehicle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Wen Yuh (2011) Total Manufacturing E-Platform. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Yee Fong (2013) Reconfigurable Feed Antenna. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Yuk Choi and Ahadlin, Mohd Daud and Shamsul Anuar, Shamsudin (2007) Vibration Analysis Of Cavitation In A Centrifugal Pump. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Yuk Choi and Rainah, Ismail (2007) Experimental Study And Simulation Of Noise Exposure In Industry Based On The Factories And Machinery Act (Noise Exposure) Regulations 1989. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Boon Yee (2014) Intelligent Fire Detection And Alert System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Chai Fen (2017) Propose Of Suitable System To Improve The Dust Collector System In Trim Booth CTRM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Chia Tiang (2011) Performance Optimizaton Of Erbium Doped Fiber Amplifier In Wavelength Division Multiplexing System For Long Haul Transmission. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Chia Wei (2016) Modelling Of Front Suspension Module Using Flexible MBD Motion View. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Chun Khoon (2017) Study On Mechanical Properties Of Eco-Friendly Kenaf Fibre Reinforced Metal Laminate Structure. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, De Rong (2017) The Design And Development Of Temperature Controlled Oyster Mushroom Farmhouse Using PID Control Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Hee Nian (2016) Baby Care Alarm System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Ho Chung (2010) Upgrade FMS200 : Shaft Supply Module Though Human Machine Interface. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Hooi Fong (2017) Accuracy Study Of Impeller On Five-Axis And Nine-Axis Machine By Using Powermill And CATIA. Project Report. UTeM, Melaka. (Submitted)

Lee, Hwang Chin (2006) Preventive Maintenance Management Decision Support System For Palm Oil Mill (PMMDS). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Jia Yi (2018) Energy Efficiency Analysis For The Laboratory Complex. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lee, Jian Der (2016) Baby Health Band. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Jing Xian (2017) A Study On The Effect Of Machining Parameters, Machining Conditions And Materials On Surface Roughness In Turning Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Kah Weng (2015) Design Of Multi-Band Bandpass Filter For Next Generation Wireless System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Kam Wah (2010) Speech Recognition Over Electrical/Electronic Appliances. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Kar Lian (2008) Computer Aided Mould Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Kian Loong (2015) Implementation Of PID Controller Using PSO And Harmony Search Algorithm For DC Motor Speed Control System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Liu Hui (2010) Parking System Using Labview With SMS Application. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Lee, Man Ching (2017) Development Of Smart Lighting System For Dolby Cinema Using Bluetooth Application. Project Report. UTeM, Melaka. (Submitted)

Lee, Mun Hoe (2015) Design, Construction And Analysis Of Ceiling Fan Cleaning Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Pei Jing (2016) Optimizing Ceramic Shell Thickness To Enhance Its Permeability. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Pei Kee (2017) Environment Mapping Using Multiple Robot. Technical Report. UTeM, Melaka. (Submitted)

Lee, Poh Yan (2017) Identification Of Lateral Transfer Distance That Minimizes Twisting And Bending Motions In Workstation Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Seih Chung (2017) Structural And Optical Properties Of Zinc Oxide Nanoparticles Synthesize Via Sol Gel Auto Combustion Method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lee, Sek Enn (2015) Control Mechanism Of Linear Electric Actuator For 3D Image Processing Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Shi Guo (2016) Effect Of Cold Arc To Deflection In Continuous Welding Of Thin Plate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Siang Tau (2015) Implementation Of Theory Of Constraints On Buffer Management In Production Planning. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Sing Chi (2018) Waste Reduction Of Safety Pin By Implementing Kaizen Activities In Textile Manufacturing Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Song Jin (2016) Design Of Noise Insulator For Metal Stamping Operation In Manufacturing Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Thiam Sui (2015) Robotic System Design Control By Using Armband Sensor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Vei Hung (2017) Beam Switching Ultra-Wideband Antenna For Medical Application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lee, Wai Kiong (2009) Programmable Pick And Place Robot Arm For AGV System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Wei Hau (2015) Improvement Of The Efficiency Of Mini Thermoelectric Refrigerator By Using Peltier Module. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Weng Sum (2010) Quality Optimization in The Manufacturing Industry: An Application Case. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Yan Qing (2018) Design And Development Of Deep Learning Convolutional Neural Network On An Field Programmable Gate Array. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Yee Chern (2015) Development Of An Active Braking System For A Go Kart. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Yee Hao (2014) Self-Power Lighting And Wireless Control Road Display System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Yeh Yee (2016) Modelling Assembly For Production Line Output : A Case Study. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Yew Loon (2004) Intrusion Detection System IDS For Detecting Network Threats And Vulnerabilities. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Yi Pei (2016) Ultrasonic Smart Cane For Visually Impaired People. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, You Hui (2016) Energy scavenging for mobile and wireless devices using high-efficiency rectifier circuit. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Zhen An (2018) Optimization Of Spray Paint Process On High Cosmetic Job. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee , Chia Hau (2008) Conceptual Study, Design And Analysis Of Stirling Engine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee , Choon Seong (2007) Problem Solving Of Foot Switches Processes Using Failure Mode And Effects Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee , Hui Lian (2009) Secure Peer-To-Peer Wireless LAN Data Sharing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee , Kyen Roon (2009) Intelligent Autonomous Vehicle For Mail Transportation (Mail Bots). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee , Mei Ph'ng and Hanipah, Hussin and Izaidin, Abdul Majid and Noor Azlin, Bidin (2009) The Effectiveness Of Technical Communication III. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee , Tze Jian (2009) Development Of Data Acquisition System For Tyre Force Measuring Device. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee , Fabien Thean Weng (2008) Omni Directional Logistic Transportation Vehicle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee , Huey Yee (2010) Optimal Control Of Autonomous Underwater Vehicle (AUV) Using Genetic Algorithms. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee , Yea Fei (2007) AD-HOC Monitoring System. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Lem , Zhi Xian (2012) Assessment Of The Hand Grip Strength And Hand Injuries For UTeM Sportsperson. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lem , Zhi Xian (2012) Evaluation Of CMM's Uncertainty By Using Excel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Leng , Siong Cheng (2011) An Investigation Of The Effect Of Various Heat Treatment Processes On Microstructure And Stress Corrosion Cracking (SCC) Of Aluminium Alloy 7075. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lenny Adrienna , Adi (2007) Accident Detector Through Cellular Phone (Receiver). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Leo , Khee Jia (2011) Cutting Force Compensation Analysis Using PID Control. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Leong, Chee Meng (2008) Development Of A PI Speed Controller For DC Motor Drive Using Rabbit Microprocessor. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Leong, Shu Teng (2013) Performance Analysis Of Mineral Fibre Reinforced Polypropylene. Project Report. UTeM, Melaka. (Submitted)

Leong, Huay Ching (2005) Randomness Fingerprint Authentication With Barcode. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Leong, Man Hong (2013) Bluetooth Remote Home Automation System Using Windows And Android Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Leong, Shu Ching (2011) Classification Of Hand-Writing Identification Based On ANFIS. Project Report. UTeM, Melaka. (Submitted)

Leong, Yoke Theng (2012) The Improvement And Optimization Of The Power Management Interfacing For PV System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Leong, Chee Weng (2017) Reduction Of Balloon Defects In Stripping Process Using DMAIC Approach : A Case Study. Project Report. UTeM, Melaka. (Submitted)

Leong, Desmond Chen Hui (2017) Developing An Interfacing System For Home Farming By Using Labview And Arduino. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Leong, Kok Seng (2018) Post Processing Techniques Of 3D Printed Part And Its Effects On Mechanical Properties. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Leong, Seng Wah (2009) Steering Control For A Car Using Backstepping Control Strategy. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Leong, Ying Yee (2017) Design And Development Of IoT-Based Parking Management Solution Using Arduino And Android. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Leow, Shell Fang (2009) Measurement Uncertainty Evaluation Computation Using MATLAB. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Leow, Li Ying (2017) Manufacturing Productivity Improvement In Clothing Industry Using Toyota Sewing System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Leow, Mei Mei (2017) Redesign Work System For Productivity Improvement - A Case Study. Technical Report. UTeM, Melaka. (Submitted)

Leow, Zhi Li (2017) A Development Of Modular Automated Storage And Retrieval System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lesta, Engkamat (2011) Comparison Of Spam Filtering Mechanism. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Letchkumar, Muniandy (2005) Just In Time Practice And Management. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Letchumanan Thevar, Maniam (2005) Expert Knowledge-Based Boiler Diagnosing System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lia Asmira, Abdul Halim (2013) Three-Phase Balanced Voltage SAGS Mitigation By Using Voltage Compensator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Liaw , Chin Yee (2008) Design And Development Casting Mould For Resin Based Medals. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lie, , Ken Nie (2013) The rolling effect in mechanical properties of 316L stainless steel for implant materials. Project Report. UTeM, Melaka. (Submitted)

Lieong, Chun Yin (2017) Development Of Smart Home Automation System Using Wi-Fi. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Liew, Kean Fei (2013) Design Of A Comfortable Bus Passenger Seat. Project Report. UTeM, Melaka. (Submitted)

Liew, Sheau Ping (2013) Implementation Of Network Communication For Utility Pole Maintenance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Liew, Toong Kean (2010) Optimization Of Machining Parameters In CNC Milling For Nylon 6. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Liew, Chin Chin (2017) Effect Of Hard And Soft Segment Ratio To Vibration Damping Properties Of Polyurethane. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Liew, Fu Hua (2016) Development Of AC Power Control Using Smartphone Via Bluetooth. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Liew, Jia Qi (2010) Home Appliances Control Using GSM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Liew, Johnnie Zhong Li (2017) Effects Of Boronizing On Grooved Metal Surface. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Liew, Kai Yan (2017) The Development Of Active Buoy Charging Station For Remotely Operated Underwater Vehicle (ROV) Using Solar Power. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Liew, Ming Young (2017) Effect Of Various Low Frequencies For Crack Detection In Non-Linear Vibro-Acoustic Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Liew, Pay Jun and Mohd Razali, Muhamad (2009) Study Of The Surface Integrity Of The Machined Workpiece In The EDM Of SKD 11 Tool Steel. Project Report. UTeM. (Submitted)

Liew, Tye Leong (2005) 3 Level Elevator Car Park System Control By PLC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Liew, Wai Yip (2015) Development Of Mobile Robot Using Rasberry Pi For Swarm Robotics. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Liew, Weng Tack (2016) Structural And Electronic Properties Of Metal Oxides Attached To Single-Walled CNT As Li-Ion Battery Electrode By Using DFT. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Liew, Wun Foo (2017) Behavioral Analysis Of Thermoelectric Module Under Different Configurations And Temperature Gradient. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Liew, Zhe Xiong (2016) Design Improvement Of 1 TERAS Sabit With Finite Element Analysis (FEA). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Liew,, King Yan (2005) E-Fakulti FTMK PC Control System. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Lim, Nicholas Boon Yew (2013) Automatic Fall Detection And Notification System Via Smartphone. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Ai Phing (2008) Development Of Customized Logistic System Using ASP. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Chee An (2013) Ironman Project - Design Of Electro-Mechanical Muscle For Elbow Exoskeleton Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Chee How (2010) Car Steering Control System For Disability Person. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Chik Ming (2005) Thermal Comfort Study And Airflow Simulation Inside Lecture Room. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Da Ping (2013) Simulation And Measurement For Indoor Air Flow. Project Report. UTeM, Melaka. (Submitted)

Lim, Feng Sheng (2012) Generalized Chebyshev Microwave Filter For Wideband Applications. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Fong Kiaw (2009) Air Flow Around Bodies In Subsonic Wind Tunnel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Huey Kian (2005) Object Recognition For Pick And Place Tasks. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Jia Qi (2012) Development Of Hydro-Atomized Spraying System For A Controlled Environment Aeroponic Farm. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Jia Yin (2013) Automatic Crash Notification Via Smartphone. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Kar Yie (2013) Exploration On ZigBee In Wireless Body Area Network. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Kok Chin (2010) Mechanical And Thermal Properties Of Intermetallic Ni5Al3 For Automotive Body Applications. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Li Kiang Samuel (2007) Blender Design Improvement Through Lucas-Hull DFA Analysis. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Lim, Si Qing (2013) Design And Analysis Of Natural Fiber-Metal Matrix Composites For Engineering Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Siew Lay (2008) Six -Legs Walking Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Wan Xi (2013) Reconfigurable Slot Antenna For Dual Band Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Yan Chinn (2011) Simulation And Analysis Of Defected Ground Structure (DGS) As A Quarter Wavelength At 2.4 GHZ Band. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Yen Ching (2011) Parking Monitoring System Using LabVIEW. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Yen San (2011) Goal Programming Approach For Production Planning. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Beng Khang (2018) Characterization Of Low-Level Modulation Techniques For Indoor Visible Light Communication (VLC) System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Boon Kiat (2015) Investigation Of Short Circuit Forces On Individual Turn Of Transformer Winding - FEM Simulation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Chee Houh (2017) Investigation On The Effects Of Human Weight On Spinal Facet Joints Using Finite Elements Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Chia Roeng (2016) Investigate And Optimize The Vivaldi Antenna For Ultra-Wideband Applications. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Chiew Jie (2016) Application Of Triz And ANP In Selecting The Best Concept Design At The Conceptual Design Stage For An Automotive Part. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Chin Xian (2018) Incorporating Of Grey Wolf Optimization To The Bees Algorithm For Continuous Optimization In Welded-Beam Design Problem. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Chooi Jing (2016) Tools For QRM Implementation In Job Shop Environment. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Choon Pin (2016) Worker Health Monitoring System Based On SOCSO Standard. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Cui Fen (2016) Optimization Of Injection Molding Process On Name Tag Plastic Product. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Cze Siang (2010) Multi Size Shape Detection. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Fang Pang (2017) The Development Of Transmitter And Receiver For Remote Control Helicopter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Guo Dong (2018) Development And Analysis Of Low Cost 3D Printing Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Hok Hong (2016) Design Of Motion Detection Using Tri-Axial Accelerometer For The Elderly. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Hui Yee (2017) Development Of An Automatic Can Crusher Using Programmable Logic Controller At FTK Canteen. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Jin Tzen (2016) Analysis And Improvement Of Lubricant Blending Cycle-Time Inconsistency Using QC Tools. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Kian Wee (2015) Modelling Of A Small Scale Quadrotor System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Kim Yew (2017) Analysis And Control Of Vibration In Machine Tools. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Liyem (2016) Investigation Of Tool Wear When Machining AISI 1045 Using Uncoated Carbide Cutting Tool. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Ming Kerk (2010) Designing And Fabricating The Guard Rail System For The Scaffold. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Mun Yee (2015) Visualization Of Dental Imaging By Developmet Of Interactive Web. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Reo Sei (2016) Development And Acoustical Analysis Using Kenaf And Coconut Fibres At Different Fibre Loading. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Ru Pei (2016) Five-Axis Tool Path Programming Utilizing CATIA V5 For Turbine Blade : Aluminium 6063. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Ruoh Lin (2017) Effect Of Thermal Cycles On Tensile Properties Of NR-EPDM Nanocomposites For Engine Mounting. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Samantha Reina (2018) A Study On Inventory Management Towards Organizational Performance Of Manufacturing Company In Melaka. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Seik Ping (2017) Optimization Of Minimum Span Frequency Assignment In Mobile Communication. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Siau Li (2016) Implementation Of FPGA Based Smart Collision Avoidance Alert System Algorithm. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Soon Yin (2016) Design And Development Of Electromagnetic Micro-Generator For Harvesting Energy From Vibration. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Suzanne Shien Thung (2016) The Application Of TRIZ Reduce Speed Loss In Semiconductor Manufacturing Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Swee Meng (2009) Rolling And Yawing Aerodynamic Performance Of An Aircraft Model. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Yee Hwai (2017) Design And Development Of An Intelligent Wireless Embedded System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lim , Boo Eik (2007) Two Wheeled Balancing Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim , Chong Wei (2009) Optimization Of Machining Parameters In High Speed Milling Of Aluminum 6061. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim , Lik Ching (2010) Home Tiles Planning And Recommendation System. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Lim , Ming Hao (2011) The Influence Of Welding Parameter On Butt Joint Welding Strength. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim , Peir Jiunn (2007) Micromouse : An Autonomous Maze Solving Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim , Seng Keat (2008) Development Of Fuzzy Logic Speed Controller For DC Motor Applications Using Rabbit Microprocessor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim , Seng Tat (2007) The Design Of A Small Scale Automated Machine For Learning Purpose. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim , Song Kwang (2007) Auto Detection Network Monitoring Software For Single VLAN (AutoD). Project Report. Melaka, Malaysia, UTeM. (Submitted)

Lim , Swee Ann (2010) Automatic Reset Residual Current Circuit Breaker With Identification Of Fault Condition. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim , Terng Fui (2008) An Analysis Of Materials Management Of Manufacturing Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim , Wee Tat (2010) Dot Matrix LED Using Microcontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim , Ching Sheng (2013) Railway Vehicle Dynamics And Vibration Analysis. Project Report. UTeM, Melaka. (Submitted)

Lim , Fung Chien (2010) Project Management : A Simulation Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim , Pei Fern (2009) Portable Honey Orange Fruit Sorter (Prototype And Power Supply Design). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim , Siang Ying (2009) Effect Of Fullerenes Nanofiller And Carbon Black Filler Of Corrosion Activities On Paint. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim , Wee Teck (2008) Design And Development Of An Embedded Controller For Robotic Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim , Yee Kai (2008) Mechanical Properties Of Mullite-Bonded Silicon Carbide Sintered At Various Heating Temperature. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Lim , Yuen Hee (2010) Power Outage Alert System (POAS) Via Sms. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Liman, Nadia (2018) A Comprehensive Study On Parametric Airplane Nose Design Using NURBS. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lina , Lo (2008) Automated Parking System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lina , Feng (2010) Inverted Pendulum Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ling, Pick Tung (2005) The Characteristics Of Air Free Jet Flows. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ling, Gordon Teck Poh (2016) Framework For Robotic Work Cell Configuration. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ling, Hui Juan (2017) Experiment Of Reducing Volatile Organic Compounds Concentration In Air By Using Indoor Vertical Garden. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ling, Hung Kit (2017) Optical And Photoelectrochemical Studies Of Tungsten Disulfide (WS2) Thin Films For Solar Panel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ling, Jia Xin (2016) Study The Properties Of MgAZ91D After The Gas Nitriding Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ling, Lily Sui Feng (2017) Smart Home Electrical Appliances Controlling Via Android Smartphone. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ling, Sing Yip (2015) Mobile Robot Navigation System Line Following Robot By Using PID Algorithm. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ling , Chai Voon (2009) Design And Analysis On Durian Opener. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ling , Neng Kang (2008) Measurement Of Thermal Comfort At Workplace: A Case Study In UTeM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Linus Michael, Stephen Mirando (2012) Comparison On The Microstructure And Hardness Of SMA Welding And GMA Welding Of Dual Phase Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lionel Chadik , August (2008) New Home Security And Safety System. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Liong, Shun Hsiang (2010) Analysis Of Springback Problem On Aluminum Sheet. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Liong , Kin Fei (2010) Intelligence Multipurpose Vacuum. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Liow, Jia Geok (2018) Design Of Automated Computer Aided Classification Of Brain Tumor Using Deep Learning. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lisa, Theng (2011) Natural Hybrid Sandwich Composite For Hardboard Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Liu, Kit Lim (2009) Vision Based Road Line Recognition. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Liu, Susana (2006) An Investigation And Modeling Of Multipath Effect In Communication Transmission Channel Using MATLAB. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Liu , Chiew Lan (2007) The Untold Stories Of Kuala Lumpur- Study Of Camera Shots And Colloquialisms Script. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Liyana, Muhamad Ali (2013) The Effect Of Colouring Agent On The Corrosion Properties Of Glass Composite Tiles. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Liza, Ahamat Mahmod (2012) Improved Performance DC Motor Control Using A Unipolar Switching Scheme. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Logan Raj, Lourdes Victor Raj (2012) Development Of Automatic Liquid Filling Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Loganathan, Sivajothy (2005) Critical Volume For Maximum Efficiency Of Exhaust Fan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Logeswaran, Kanasin (2010) Design Optimization Of Third Brake Light And Signal System On Motorcycle Helmet. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Loh, Mun Chui (2013) Performance Analysis Of Mineral Fibre Reinforced Polyethylene. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Loh, Wui Foon (2012) Data Acquisition System For Air-Cond In Fke For Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Loh, Angeline Wan Jing (2017) Brain-Machine Interface Device For Amyotrophic Lateral Sclerosis (ALS) Disease Using Arduino. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Loh, Chai Ling (2016) The Barrier Of Consumer's Decision-Making Toward Implementation Of Solar Photovoltaic Panel In Malacca. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Loh, Choon Yong (2018) Tribological Performance Of Hybrid Composites Based On Palm Oil Fibres And Alumina Powder Blend. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Loh, Jacky Tung Jiong (2018) Thermal Comfort Of A Typical Office Building A Parametric Investigation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Loh, Kah How (2016) Improved GPS Single Point Positioning Using Weighted Least Square Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Loh, Mun Kong (2017) Fluidized Bed Granulation Process : Study On Airflow Effect On Urea Granule Physical Properties. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Loh, Ser Lee and Gan, Chin Kim and Salleh, Shaharuddin and Sarmin, Nor Haniza and Cheong, Tau Han (2017) Raster Map Extraction For PV Impact Study On Distribution Network. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Loh, Sok Yee (2018) Benchmarking Of Green Cement Technology For Malaysian Cement Industry : Cases Study At Lafargeholcim Malaysia And YTL Cement. Project Report. UTeM, Melaka. (Submitted)

Loh, Suet Leng (2018) Productivity Planning To Reduce Waste By Simulation In Manufacturing System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Loh, Ting Pohg (2017) Profiling Design Preferences Using Bezier Curve Towards Kansei Engineering. Technical Report. UTeM, Melaka. (Submitted)

Loh, Yew Fei (2016) Hand Sign Language Translator By Using Motion Sensor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Loh, Zhia Yew (2008) Front Wheel Drive, Rear Wheel Drive, And Four Wheel Drive Effect Comparison To Vehicle Directional Stability. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Loh , Mun Yee (2011) Analysis And Measurement Of Fiber To The Home (FTTH) As An Access Technology In Fiber-Optic Communication Link. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Loh , Sai Chun (2011) Implementing SPC Tools In A High Precision Manufacturing Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Loh , Yau Weng (2008) Study On The Efficiency Of Services Provided By Post Office Using Simulation Modelling. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Loh , Yin Kuan (2008) The Relationship Between Grain Sizes And Hardness Of Sintered Alumina Product. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Loh, , Xiao Hui (2013) Effect of heat treatment on hardness and impact strength of stainless steel. Project Report. UTeM, Melaka. (Submitted)

Loi, Wei Cheong (2012) Regenerative Braking Systems (RBS): Energy Measurement. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lok, Yian Yian and Khoo, Chin Foon and Tee, Boon Tuan (2007) Mathematical Modelling Of Stagnation Point Flow Induced By Accelerating Motion In Micropolar Fluid. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lok, Soo Kee (2017) Accuracy Study Of Car Rim On Five-Axis Simultaneous Milling And Nine-Axis Turn-Mill Machine By Using CATIA V5. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lok, Wing Hong (2016) Development Of Autonomous Robot For Flatness Inspection System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lok , Fung Kiew (2008) Modeling And Simulation Of An Impeller In Circulating Water Pump In A Power Generation Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Loke, Kok Wei (2015) Robotic System Design Controlled By Using Hand-Gesture Motion Sensor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Loke, Weng Hong (2010) Vision-Based Mobile Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Loke , Ban Hoe (2009) Virtual DSP System Design Using Visual Studio. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lokman, Abdullah and Mohd Hisham, Nordin and Muhammad Hafidz Fazli , Md Fauadi and Mohd Noor, Akmal Rosli (2008) Automated Product Inspection System Using Radio Frequency Identification (RFID) Technology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lokman, Abdullah and Mohd Hisham, Nordin and Shariman, Abdullah and Lee, Wai Kiong (2010) PC Based Control of XYZ Motion for Storage System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lokman, Hussin (2005) Mengimplimentasi C++ Ke Atas Robot Mobil Fischertechnik. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lokman Hakim, Amran (2009) Network Wireless Smoke Detector By Using RF. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Loo, Chooi Heng (2011) Thermal-Stress Analysis Of Cross-Drilled Disc Brake Rotor For UTeM Formula Style Race Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Loo, Kin Hoe (2012) Six Sigma Dmaic Implementation At Manufacturing Company. Project Report. UTeM, Melaka Malaysia. (Submitted)

Loo, Lok Siang (2013) e-FireXIT - A Smart Route Decision Making System To Emergency Exit. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Loo, Seong Eng (2011) Cost Monitoring Digital Power Meter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Loo, Soon Lii (2017) Optimal Placement And Sizing Of Distributed Generation Considering Costs Of Operation Planning. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Loo , Chooi Heng (2011) Thermal-Stress Analysis Of Cross-Drilled Disc Brake Rotor For UTeM Formula Style Race Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Looi , Siew Chin (2015) Six Legged Robot Walking Gaits. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Loong, Win Ann (2011) Design And Analysis Of Anti Crimping Roll Position Using CAD Tool. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Loong, Chee Han (2015) Design And Analysis Of Heat Pump Control System By Using Programmable Logic Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Louis, Shirley Lorita (2016) Sodium Alginate Concentration Derection Using Fiber Optic Component As Sensor Element. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Louis, Teo Cheah Hong (2015) The Effect Of Semi-Vertex Angle On The Buckling Of Cylinder And Cones. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Low, Ru Shi (2010) 3D Animation - Bulat And Panjang. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Low, Say Soon (2010) Least-Squares Parameter Estimation And Its Application In Electronic Products. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Low, Seong Gook (2008) Disc Brake Performance : FEA. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Low, Yin Fen and Izadora, Mustaffa and Norhashimah, Mohd Saad (2006) Medical Image Compression Using Wavelets For Telemedicine Applications. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Low, Kai Zhong (2016) Sensitivity Study Of Front Suspension Properties Toward Vehicle Dynamic Characteristic Using Adams. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Low, Li Chuin (2016) Design And Analysis Of Numbering System In Fibre To The Home (FTTH) System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Low, Soo Har (2010) R66 Bus Superstructure Concept Design Development. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Low, Xian Min (2017) Automated Waste Separated Machine. Technical Report. UTeM, Melaka. (Submitted)

Low , Kah Huey (2006) Quality Investigation Of Circular Laser Cutting. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Low , Kuan Chuen (2008) An Analysis Incoming Quality Control Of Material In Manufacturing Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Low , Wen Jie (2010) Study Of Influence Of Retrogression And reaging (RRA) Treatments On Microstructure Evolution And Mechanical Properties Of Aluminium Alloy 7075. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Low , Yean Yin (2009) Development Of Sensor And Automation System For A Fruit (Honey Oranges) Sorter Machine. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Low , Siew Yi (2012) Proposed A Metal-Oxide Surge Arrester Model To Improve Lightning Protection. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Luah, Chii Hao (2017) Blade-Generator Structure Analysis And Topology Optimization Of Savonius Vertical Axis Wind Turbine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Luei , Hong Keat (2009) Surface Modification Of Low Carbon Steel In Laser Cutting. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lukman, Desa (2011) Deployment Of Outdoor Test-Bed Wireless Mesh Network Using D-Link Router. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lum , Yip Hing (2011) An Investigation On Effect Of Colorant Pigment On The Mechanical Properties Of Polyoxymethylene Copolymer In Long Gear. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Luqman Hakim, Kasmon (2010) Development Of Navigation System For Autonomous Mobile Device. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lydia , Abd Arif (2008) Numerical Simulation On Micro Channel Heat Exchanger. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lydiana, Sorupi (2007) Line Following Mobile Robot Prototype. Project Report. UTeM, Melaka, Malaysia. (Submitted)

M

M. Azhar, Ume Nur Ashikien (2016) Human Robot Interaction (HRI) For Kindergarten Children Using Humanoid Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

M. Balakirisnan, Shawn Shivaneson (2017) Investigation Of Mobile Network Coverage Performance In UTeM’s Technology Campus Using Coverage Profiling. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

M. Zain, Wan Zafirah (2018) Developing A Blind Image Quality Assessment (BIQA) Model Based On Image Local Contrast Features. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ma, Seet Ting (2016) EEG-Based Brain Computer Interface (BCI) For Smart Home Control Using Raspberry PI. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Maadis, Mohd Shahril (2016) Puyuh Farm Environment Control And Alert System Using Microcontroller And GSM Module. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Madihah, Daud (2014) UTeM Bus System (UBS) Using ZigBee. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Madzuki, Muhammad Ihsan (2017) Force Effects On Laminated Rubber-Metal Spring Using Transmissibility Test Numerical Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mageswaran, Paramasiban (2006) Study And Theoretical Investigation Of Variable Geometry Turbo Charger (VGT) For Lower Emissions And Improved Characteristic And Efficiency. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mageswaran, R. Jaganathan (2010) Centralized Wireless Sensor Network Deployment. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mageswaran, Renugah (2017) Development Of Water Resistant Particleboards From Rice Husk. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mah, Hoong Ming (2009) Line Following Automatic Robot Using Mecanum Wheel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mahadi, Mohamad Farid (2017) Comparison Study Between HSC 70 With DMU 60 EVO Using Powermill Software On Simultaneous 5-Axis Machining Part. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mahadi, Nur Athirah (2017) Tensile Properties And Swell Behaviours Of Natural Rubber Modified By Starch For Biodegradable Rubber Product. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mahadi , Mustafa (2009) A Feasibility Study On Design For Environment And Design For Sustainability Application In Boat Industries. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mahadir , Lokeman (2008) Tunnel Inspection Robot II. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mahadir , Mohd Tazrin (2010) Solar Powered Water Pump. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mahamad, Khairul Izlan (2008) The Design Of Motorcycle Rim Adjusting Jig Using Dial Gauge. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mahani , Mohd Yusof (2006) Development Of 3 Fingers Robot Hand Gripper. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Mahanum, Mohd Zamberi (2005) Performance Of 2-Shaft Gas Turbine Using Liquid Petroleum Gas (LPG) As A Fuel Feeder. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mahasan, Ahmad (2008) Merekabentuk Pengawal Suai Untuk Sistem Tangki Berkembar. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mahasan, Mat Ali (2008) Manual Control Robot For Pick And Place Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mahat, Mohd Redzwan (2016) Study Of The Impact Routine Adjustment And Static Factor For Commercial Building. Project Report. UTeM, Melaka,Malaysia.

Mahathevan , Ramasamy (2006) Conveyor Belt Motor Using Control Grafcet As Programming Tool. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mahathir Mohamad, Lazim (2008) Video Streaming Performance Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mahayuddin, Zahid Nasrullah (2017) Development Of Cascaded H-Bridge Multilevel Inverter Based On PWM. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mahendran, Ramaiah (2008) Material Detection System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Maheswaren, Arun (2017) Development Of Smart Table Tennis Trainer Controlled By Using Android Application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mahfor, Muhammad Nurfaidhi (2016) Development A Liquid Sensor Using Fiber Optic For Engine Lubrication Oil And Optimization Using Design Of Experiment (D.O.E.) Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mahfuzah, Md. Shukor (2012) Design A 3.5 Antenna For Dual Band Applications. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mahirah, Mohamad (2010) Design And Development Of GPS Navigation Guideline System For Autonomous Underwater Vehicle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mahmod, Amirul Rasyid (2017) Hardness And Microstructure Of Cockle Shell Powder Filled Recycled Polyethyelene-Terephthalate/Polycarbonate Blends. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mahmud, Norazilah (2017) Study Of Vortex Tube Cooling System On Tool Wear And Surface Roughness Using Conventional Machine. Technical Report. UTeM, Melaka. (Submitted)

Mahmud Khalil, Lias (2008) A Study Of Optimum Condition To Produce Rubber Induced (Polypropylene). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mahmuddin, Muhammad Amirul Asyraf (2017) Sensorless Control Of PMSM Drives Using Voltage Model Based On Power Reactive Equation. Technical Report. UTeM, Melaka. (Submitted)

Mahrob, Noramilza (2017) Welding Initiation At The Entry Stage Of Bobbin Friction Stir Welding (BFSW). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mahyuni, Mohd Idris (2006) Smart Router Configuration System (TELNET). Project Report. Melaka, Malaysia, UTeM. (Submitted)

Mahzan, Johar (2010) Effect Of Solution Annealing On Microstructure, Corrosion And Mechanical Property Of Sensitized AISI 316. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mahzan, Irna Nadira (2017) Development Of FPGA Based Portable Low-Cost Digital Signal Generator. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mai Mariam, Mohamed Aminuddin and Yusmarnita, Yusop and Zamre, Abd Ghani (2006) DC Motor Speed Control Development System (Sistem Pembangunan Kawalan Kelajuan Motor AT). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Maidin, Nur Fadhilah (2017) Application Of Coconut Fiber-PP Composite For Fabrication On Interior Part Of Automotive Component. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Maimunah, Awang Majid (2009) Solar Powered Irrigation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Maisarah, Abu Bakar Assari (2013) Eco Saver Mower (ESM). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Maisarah, Abu (2013) Designing Artifical Magnetic Conductor Using Bendable Substrate For RFID Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Maizatul Akmal , Musa (2004) Study On Network Performance At FTMK. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mak, Kien Keng (2010) Design And Analysis Of Cast Metal Matrix Using CAD Tools. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mak, Kien Keng (2010) Design And Analysis Of Cast Metal Matrix Using CAD Tools. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Makawi, Mustafa Mubarak (2016) Green Home Security System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Makbul Shah, Nurhidayah (2016) Design And Implementation Of Smart Observable System Of Indoor Hydroponic. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mamat, Hafizuddin (2016) Development Of Automated Assembly Trainer With HMI/SCADA System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mamat, Nurul Nabila (2018) Development Of Capacitive Power Transfer For Rotary Applications. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mamat, Umie Rosmida (2017) Quality Improvement Using Factorial Design (A Case Study In Manufacturing Company). Technical Report. UTeM, Melaka. (Submitted)

Manakor, Eswaran (2017) Characterisation Of Wideband Nonlinear Vibration Absorber Using Adjustable Magnetic Stiffness. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mani, Nirmessini Maselah (2016) Application Of Kaizen To Prevent Slip Of Defective Products To Internal Customer In Automobile Manufacturing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Manimaran, Lalitah (2016) The Effectiveness Of Web 2.0 To Enchance The Smes Performance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Manimekalai, Balasubramaniam (2014) Investigation On The Correlation Between Salinity & Electric Energy: Visual Basic Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Manin, Aida Maziah (2018) Analyse The Performance Of SOI MOSFET Device With Different Gate Spacer Materials. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Maniza , Mukim (2010) Improvised Braille Character To Roman Text Converter Using PIC Microcontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mansor, Masrina (2017) Development Of Milk Dispenser Using Arduino Microcontroller. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mansor, Nur Atiqah (2017) Deveploment Of Brake Oil Monitoring System Tool Using Application Of Fiber Optic Liquid Sensor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mansor, Nurul Hidayah (2016) Assessment On Islanding Mode Performance Towards Better Power Utilization In Smart Grid Using Powerworld Software. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mar'emazairy , Omar (2007) The Implementation Of Total Productive Maintenance (TPM) At High Volume Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Marani, Rahmat (2009) Analisis Dalam Menghasilkan Plastik Diperkuat Gentian (FRP) Menggunakan Plastik Terbuang Dan Sabut Kelapa Sawit. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mardiana, Bidin and Siti Khadijah , Idris and Fauziyah , Sallehuddin and Hanim, Abdul Razak (2009) Speech Operated System For Home Appliances. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mardiana , Bidin and Fauziah, Salehuddin and Hazura, Haroon and Zahariah, Manap (2009) Electronic Lock Using Real Time Signature Recognition System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Marhaini , Mat (2006) Development Of Wireless LAN User Authentication Application. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Mariam Naaila, Md Hanapi (2013) Measuring Using Augmented Reality Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mariani , Mohamad (2009) Real Inverted Pendulum Control Using LQR Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Marikon, Muhammad Redzuan (2017) The Investigation Of The Position Control Finger For Rehabilitation Robot Using 5DOF Robotic Arm Manipulator. Technical Report. UTeM, Melaka. (Submitted)

Marina , Mohamad (2011) Design Low Noise Amplifier For GPS Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mariyam Jameelah, Bahari (2007) The Effects of Cutting Parameter on Workpiece Surface Layers in the Die Sinking Electrical Discharge Machine (EDM). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Marizan, Sulaiman (2009) Development Of Expert System Based Sofware For Energy Monitoring Using Power Line Carrier. Project Report. UTeM, Melaka. Malaysia. (Submitted)

Marizan, Sulaiman and Azhar, Ahmad and Nur Khairul Bariyah, Mahyudin (2010) The Effect Of Multiple Lightning Impulse On The Electrical Characteristics Of Mov. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Marizan, Sulaiman and Hairol Nizam, Mohd Shah and Lim, Wee Teck (2010) Sequencing and control algorithm of pattern recognition for industrial processes. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Marizan, Sulaiman and Hairol Nizam, Mohd Shah and Lim, Wee Teck (2010) Vision Based Pattern Recognition For Industrial Inspection. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Marizan, Sulaiman and Zainuddin, Mat Isa (2005) An Expert System Based Power System Modeling And Analysis With Symmetrical Components. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mark , Fidelis Kensin (2013) Voice Recognition Ignition System. Project Report. UTeM, Melaka. (Submitted)

Marliana, Md Taib (2010) Measurement Error And Uncertainty Analysis By Excel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Marshall Langi , Tanyit Nasip (2007) Design A Switch Mode Power Supply Using Discontinuous Mode Of Buck-Boost Topology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Martin, Aerun (2017) The Integration Of Fuzzy Logic System For Obstacle Avoidance Behaviour Of Mobile Robot. Project Report. UTeM, Melaka. (Submitted)

Martini, Mohmad (2015) Comparative Tribological Investigation Of Bio-Lubricant Formulated From Cooking Palm Oil. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Marwan, Mat Salleh (2006) Universal Measuring Machine : A Study On Potential Error And Common Error In Calibration Process (Dial Indicator). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Maryahafida, Mamat (2010) Solar Light Positioniong Detector. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Marzian Hairani , Mat Ishak (2005) Kajian Kes Mengenai Pencerobohan Sistem Rangkaian Komputer Dan Cara Mengatasinya. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Marzukhe, Ida Nurfarhana (2017) Ergonomic Environment Using Subjective Method Regarding Discomfort And Risk Analysis For Prolonged Standing At KTM Komuter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Marzuki, Muhammad Shamil Alif (2018) Study Of Mechanical And Thermal Properties Of HDPE In Response To Accelerated Thermal Aging. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mas Ayu Irma, Muhamad (2009) Dynamic Characterization Of A Single-Link Flexible Manipulator System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Masazlan, Siti Aisyah (2018) Impediment Factors Of Adopting Advanced Technology Among Electronic Industries In Johor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mashasliza , Ismail (2007) Rekabentuk Sistem Penghantaran Produk Nata De Coco. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mashirnani, mohd Tahir (2012) Fruit Sorting Based On Image Processing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mashitah, Osman (2009) Automatic Controlling Conveyor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mashitah, Ramli (2009) Wireless Floor Dryer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mashitah, Razi (2015) Effect Of Pineapple Leaf Fiber Length On The Properties Of Pineapple Fiber : Starch Composites. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Masihah, Abd Halim (2007) Kajian Kesan Lapisan Serat Dan Suhu Pengerasan Ke Atas Komposit Laminat. Project Report. UTeM, Melaka. (Submitted)

Masiron, Nurafifah (2015) The Effect Of Different Cutting Tool Material To The Surface Finish Of D2 Tool Steel In Drilling Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Masita , Mohd Bari (2008) Parameter Study On Heat Exchanger. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Maskana, Mamat (2012) Sistem Kawalan Adaptive PID Untuk Kenderaan Autonomi Berdasarkan Anggaran Gred Jalan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Masmurni , Abdul Rahman (2009) Vivaldi Antenna Design For WLAN Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Masnah, Gambilok (2015) Blind Navigation System By Using Arduino With 1Sheeld. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Masni, Ahmad Basri (2009) Mengkaji Sifat-Sifat Mekanikal Campuran Plastik Buangan Yang Terdiri Daripada Plastik Jenis PET, HDPE Dan PS. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Masnora, Sepikun (2005) Merekabentuk Antena UHF Boleh Laras Dengan Kawalan Jauh. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Masrizal, Bakri (2010) Leave Management System via SMS. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Masrul , Masran (2007) Design Switching Mode Power Supply Using Boost Converter Continuous Mode. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Masrullizam, Mat Ibrahim and Syafeeza, Ahmad Radzi (2008) Intruder System Using FPGA-Based. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mastor, Fatin Najwa (2016) Effect Of Inlet Velocity On Fluid Flow In T-Junction Pipe With Edge Fillet For Dividing Flow. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mastura, Mutafa (2015) Investigation Of Hydraulic Piston Due To Contamination. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mastura , Maarof (2007) Flow Investigation Around Immersed Bodies In Subsonic Wind Tunnel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mastura Al-Nur, Abdul Aziz (2015) Vehicle Security System Via SMS. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Masuri, Muhammad Radzi (2018) Thermoelectric Properties Of Ag Doped Na0.8CoO2 Synthesized Via Citrate-Nitrate Auto Combustion Reaction. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Masyumi, Hussain (2005) Study On The Application Of Variable Speed Drive To Achieve Cost - Effective Electricity Saving. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mat, Lokman Hakim (2016) Improvement Of Tribological Properties Of Zinc Dialkyldithiophosphate (ZDDP) Induced Corn Oil Bio-Lubricant With The Addition Of Molybdenum Dialkyldithiophosphate (MoDTP). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mat Abas, Nur Hafizah (2017) Frictional Behavior Of SK11 In Engine Oil And Nanoparticles-Enhanced Engine Oil. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mat Adam, Nur Syuhada (2017) Setup Time Reduction Of Snap Fastener Machine By Implementing Single Minute Exchange Of Die. Technical Report. UTeM, Melaka. (Submitted)

Mat Ariffin, Nuramalina (2017) A Study On Ergonomic Environment Factor And Inertia That Contribute To Discomfort Inside Train. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mat Dan, Reduan and Ahmad, Asmala and Tee, Boon Tuan and Zakaria, Muhammad Zulfattah (2017) Thermal Management Fundamental Investigation On Alternator Regeneration System With Combined Gasoline-Hydrogen Engine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mat Dewi, Muhammad Ainol Hafiz (2017) Development Of Attendance System For Student Using Bluetooth Device Connection. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mat Faizal, Omar (2007) Automatic Gate Control. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mat Hassan, Mohd Iqbal Hakim (2016) Dynamic Fatigue Analysis For Spot Welded Joint Based On Natural Frequency Due To Cycling Loading. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mat Hassan, Muhamad Hafis (2016) Study The Material Performance Of Aluminum-Zinc And Galvanized Iron For Roofing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mat Hussin, Syera Amira (2016) Study On Air Distribution Associated With Air Handling Unit : Duct System With Cooling Case. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mat Isa, Syaharil (2016) The Effect Of Moisture On AC Breakdown Voltage Of Synthetic Ester Oil Undegone Different Moisture Removal Methods. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mat Isa, Syaharil (2016) The Effect Of Moisture On AC Breakdown Voltage Of Synthetic Ester Oil Undegone Different Moisture Removal Methods. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mat Jahari, Nur Farrahim (2017) Optimization Of Fiber Optic Sensor In Detecting The Condition Of Sunflower Oil For Food Industry Usage By Using Factorial Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mat Nasir, Khairul Azwan (2018) Quality Improvement By Implementing Kaizen Activities In Textile Manufacturing Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mat Nor, Mohd Firdaus (2008) FEM Analysis And Improve Design Of Frontal Bumper Of Wira. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mat Nor, Muhamad Asrul Affendi (2016) Fabrication Of Automatic Pump Down On Split Unit Wall Mounted Type Airconditioning System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mat Nor, Nurul Aqilah (2017) A Study On The Radial Slot Line Array Antenna With EBG Structure At 28 Ghz. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mat Pauzi, Muhammad Asrul (2017) Design Of Food Truck That Fulfill The Ergonomic Purposes. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mat Radzi, Muhamad Ridzuan (2016) Development Of Building Application Noise Barrier Using Sandwich Structure. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mat Youb, Norsarizan (2008) Designing Helicopter Controller Using Software. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mat Zainu Zaman, Mohamad Rafiezi (2016) Significant Effect Of Different Base Metal Sheet Spot Welding. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mathivaanan , Mariappan (2011) Wireless Vehicular Communication Network Using NCTU Network Simulation (NCTUNS). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Matieu, Ah Kim (2006) Sistem Pengecam Suara Automatik. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mau, Han Pink (2015) Design And Development Of Pole Climbing Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mawaddah , Muhammad (2007) Implementation Of Recursive Maximum Likelihood (RML) Algorithm In Designing Adaptive Notch Filter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

May Franny, Sepikit (2005) Smart Lighting & Air Conditioning Switching Device. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mazalan, Muhammad Danial Farhan (2017) Optimization Of Tensile Strength Via Optimal Processing Parameter For High Density Polyethylene (HDPE) Material. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mazalinda, Mazlan (2011) Automatic Pineapple Peeler Machine Using PLC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mazareena, Mokhtaram (2008) The Study And The Design Of Mass Marsh Or Grass Puller Mechanism. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mazda, Nur Syahirah (2016) The Effects Of Shaft Misalignment At Different Speed On Vibration And Sound Emission. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mazelan, Muhammad Imran Kasimee (2016) Design And Development Of Piezoelectric Energy Harvester For Ultra Low Energy Electronics. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mazelan, Muhammad ‘Azim Saniy (2017) Design And Development Of Portable U-Turn Signal System For Motor Vehicle. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mazidah, Bakhari (2015) Merekabentuk Dan Menganalisis Sebuah Pemanggang Barbeku Menggunakan Kuasa Solar. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mazidah, Mazri (2013) Effect Of Thickness On Mechanical Properties Of Plywood Honeycomb Core. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mazizi , Mohamed (2013) Emisi prestasi enjin diesel menggunakan campuran biodiesel sawit dengan bahan aditif sebagai bahan api. Project Report. UTeM, Melaka. (Submitted)

Mazlan, Nur Hidayah (2009) Design And Implementation A Flexible Bed For Patient Facilities (Driver Circuit Modification). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mazlan, Ahmad Nizam (2015) Design Of An Intelligent Energy Saving Building Concept Using PID Approach For Indoor Gallery. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mazlan, Ikhwan Fakhrulhaziq (2017) Effect Of Different Welding Parameters To The Mechanical Properties Of Spot Weld. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mazlan, Mohd Fazlan Rezza (2017) A Study On User Acceptance Towards The Use Of Live Video Streaming Technology Among Internet User. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mazlan, Muhamad Hafeez Fikri (2016) Microstructural Characterization And Mechanical Properties Of Semisolid A356 Aluminium Alloy. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mazlan, Muhammad Hazim (2017) Design, Analysis And Fabricate The Prototype Of Food Truck Body. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mazlan, Muhammad Iqmal Qusyairie (2016) Efficiency And Cost Comparison Between The Utilization Of Condensed And Evaporated Refrigeration Accumulator And Battery As Backup System For Solar Air Conditioner. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mazlan, Muhd Uzi Migzuan (2017) Development Of Shuttlecock Launcher With Dual Mode Trajectory System For Badminton Training Purpose. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mazleenda , Mazni (2010) Development Of Hydrophone System For Autonomous Underwater Vehicle (AUV)Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mazliah , Mazlan (2011) Innovative Thermoplastic Starch Based Biodegradable Packaging For Food Industies Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mazliyana, Ayub (2009) Ultrasonic Cane For The Blind : Transmitter And Receiver. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mazni , Mohamad Mohtar (2006) Infrared Receiving Mobile Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Maznizam , Mazaland (2005) Network Monitoring Bandwidth Control. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Mazran, Esro (2009) Development Of Control And Data Acquisition System Using Controller Area Network (CAN) Bus Protocol. Project Report. UTeM, Melaka. Malaysia. (Submitted)

Mazran, Esro and Imran , Mohd Ibrahim and Masrullizam, Mat Ibrahim (2009) Development Of A Prototype Of Music Synchronized Lighting System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mazwani , Yahaya (2008) 4 BENC Attendance System Via Smart Card. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Md Afindi, Muhammad (2013) Fabrication And Characterizations Of Hydroxyapatite (HA) / Chitosan (CTS) Composite Layer Onto Titanium Alloy (Ti-6AL-4V) Substrate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Akhir, Noor Liyana (2017) Development Of Automatic Meal Dispenser For Pet Dietary Via Internet Of Things (IoT). Project Report. UTeM, Melaka. (Submitted)

Md Ali, Mohamad Fariq Azzad (2017) Improvement In Efficiency Of Water Floating Nano Turbine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Ali Shah, Muhamad Amirul Shah (2016) Development Of Hybrid Helix-Patch Antenna Transmission System For GPS-Guided Aerial Surveillance System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Ali Shifudin, Mohamad Hatim Arrazi (2016) Feasibility Of Coconut Grated In The Production Of Chipboard. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Amin Teng, Azlina (2015) Development Of Tele-Operated Animatronic Hand. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Amin Teng, Fazilla (2015) Development Of Measurement System For Indirect Hand Grip Force And Wrist Angle For Bionic Hand. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Aris, Muhammad Mahir Al Hafiz (2015) Development Of Waist Power Assistive Suit To Prevent Lower Back Pain. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Ashadi, Md Johari (2006) Pembangunan Sistem Maklumat Pelajar Graduan Fakulti Kejuruteraan Elektronik Dan Komputer (FKEKK). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Asyraf , Md Anuar (2008) Occupational Safety And Health-Identification Of Potential Risks In Furniture Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Azmi, Noramira (2017) Effect Of Fly Ash Particle Size And Composition On The Properties Of Electrodeposited Nickel Fly Ash (Ni-FA) Composite Coating On Aluminium Alloy 7075 Substrate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Azriq Izwan, Md Yusop (2009) Gantry Crane System : Inverse Dynamic Analysis Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Dan, Rosidah (2016) Managing E-Waste For Environmental Sustainability: A Cases Study At Department Of Environment Malaysia (DOE) And Meriahtek Sdn Bhd. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Daud, Nazri and Cheng, See Yuan and Mat Yamin, Ahmad Kamal and Ab Ghani, Ahmad Fuad and Zainuddin, Farah Ayiesya (2015) Experimental Study On Flow Separation Control Of NACA Airfoil At High Angle Of Attack Using DBD Plasma Actuator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Esa, Nur Athirah (2014) The HIRARC Factors Towards Safety Performances In Naza TTDI Shah Alam. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Fendy , Md Fazeli (2009) Attendance Free Parking Counter Using Microprocessor And Magnetic Sensor (hardware). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Fisal, Nur Farzana (2017) Smart Accident Identification Using Web-Based System For Emergency Department. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Md Fua’ad, Jamian (2010) Merekabentuk Dan Menghasilkan Blok Uji Ujian Tanpa Musnah (NDT) Untuk Aplikasi Ujian Ultrasonik (UT). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Guzali , Mohamad Azli Zhafri (2016) Design A Dualband Rectifying Circuit For RF Power Transfer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Hasan , Muhammad Roshidi (2016) Computer Network Product Quality Inspection System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Ilias, Omar Dani (2017) Design And Fabricate A Prototype Of Fire Safety Window Grille For Residential Unit. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Isa, Nurhazimah (2008) A Study On An Engine Cooling Unit Of Automotive Engine Test Bed. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Isa , Ali and Mohd Yusoff , Sulaiman and Juhari, Ab. Razak (2006) Test Rig Development Of Automotive Radiator Performance On A Vehicle Engine Block. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Jelani, Muhammad Zailan (2016) The Investigation Of Thunder For Profiling The Type Of Lightning. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Khairul Amri, Md Zain (2009) Home Alarm System Using Detector Sensor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Kurdi, Muhamad Anwar (2016) A Development Of Fibre Optic Sensor For Detecting Alcohol (Ethanol) Level In Perfume. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Monir, Md Najmi (2016) Investigation On The Use Of Air Flow Indicator In Vehicle Air Conditioning Sensor As Dust Particle Accumulation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Muzzammil , Md Jais (2007) Temperature Measuring Apparatus. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Nasir, Muhammad Afiq (2016) Portable Artificial Nose To Detect Chicken Meat Spoilage Using Ammonia Sensor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Noah, Jamal and Marizan, Sulaiman and Siri Norasmah, Mohtar (2003) Analysis Of Conductivity And Current Carrying Capacity Of Aluminum Conductor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Noor, Muhamad Fahmi (2017) A Study On Impact Properties Of Hybrid Oil Palm Empty Fruit Bunch/Kenaf Reinforced High Density Polyethylene Composites For Automotive Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Nor Irwan Shah , Md Ab Rahim (2007) Design And Development Of Semi-Auto Point-To-Point Pneumatic Tube System For Manufacturing Applications. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Osman Ani, Mohamad Taufiq (2017) Improvement Of 12 Meter Catamaran Boat Hull Design. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Md Radzi, Muhammad Syafiq (2018) Numerical Investigation Of Nanofluid Flow And Heat Transfer Inside A Microchannel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Razali, Juliana (2016) Automated Packaging Visual Inspector Using Template Matching Algorithm In Image Processing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Razif , Mohd Salim (2006) Computer Aided Engineering For Solving Transmission System Problem. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Ridzuan , Talib (2008) Design A Multi-Function Digital Thermometer. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Md Saat, Mohd Shakir and Darsono, Abdul Majid and Shukor, Ahmad Zaki and Kok, Swee Leong and Zakaria, Zahriladha and Mohd Azman, Su Noorazma (2017) A New Method Of Nonlinear H-Infinity Observer Design For Polynomial Discrete-Time Networked Control Systems Using Sum Of Squares Optimization Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Safirul Shafik, Ramlee (2010) Pocket Tacho Meter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Said, Mohd Ashraf (2011) Portable Distance Measurement. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Saiful Anuar, Mohd Nasirruddin (2008) Obstacle A Voidance With 4WD Rc Robot Using Ultrasonic And Infrared Sensor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Salim, Md Yunos (2009) The Usage Of Solar Energy To Reduce The Warm Temperature In The Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Salleh, Mohd Khairulrizal (2008) Kesan Bentuk Lingkaran Pemanas Ke Atas Tempoh Air Mendidih Dalam Cerek Elektrik. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Salleh, Muhammad Iqbal (2017) Biodegradability Of Commercial Plastic Bags. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Salleh, Rabiatul Adawiyah (2016) Fiber Optic Sensor For Sodium Chloride Concentration Detection. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Sallehan, Muhammad Syafi (2017) Comparison Of Different Organo Zinc Compound As Tribological Properties Improver In Palm Oil Based Bio-Lubricant. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Sazali, Mohamad Safwan (2015) Development Of Grid Frequency And Analyse The Data In Real Time. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Suhaimi, Muhammad Allif Izzat (2016) Automatic Watering The Plant Without Human Interference. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Taufiq, Muhammad Qamar Azfar (2018) Hand Sign Language Translator Using Motion Sensor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Yusof, Nurzahirah (2016) IRIS Classification By Using An Improved Differential Box-Counting Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Yusoff, Nur Mimi Waheda (2016) Development Of Microsleep Detection System By Using Biosensor Module And Pulse Rate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Yusop, Azdiana (2008) Dynamic-inversion-based control for vibration-free positioning of a gantry crane system. Project Report. Universiti Teknikal Malaysia Melaka. (Submitted)

Md. Amta Ezra, Ahmad (2010) The Feasibility Study And Design Improvement Of Fire Fighting Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md. Dahad, Nurul Syahida (2009) Roboclean. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md. Haikal, Md. Kamsor (2008) Mengkaji Prestasi Enjin Kecil Menggunakan Bahan Api LPG. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md. Hishamuddin, Abd Razak (2005) Campus SMS Information System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md. Jani, Khairul Bariyah (2016) Development Of Smart Assist Device For Visual Impaired Person. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md. Liza, Rossyana (2016) Minimize Waste At Production Line By Implementation Lean Manufacturing Tools (Poka Yoke). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md. Mussa, Md. Norazree (2018) Degradation Of Physical And Mechanical Property Of Starch Modified Natural Rubber Composites. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md. Nor Hayati, Tahir and Mohd Fazli, Mohd Sam (2010) Diffusion of Telecommunication in Malaysia Consumer Decision Making on Technology Adoption. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md. Radzai, Said and Amzatul Akmam, Mokhtar (2005) The Crushing Of Cellular Filled Thin Tubes. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md. Radzai, Said and Amzatul Akmam, Mokhtar (2005) The Study Of Finite Element Analysis On Aluminium Honeycomb Under Biaxial Loading. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Medon, Nurul Izzati (2017) Performance Comparison On PID And MIT Rule Approach For Electro-Pneumatic Position System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Megat Ahmad Haziq, Ahmad Zabidi (2013) Reprocessing Waste Tyre For New Product Potential. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Megat Izzuddin, Megat Ab Manap (2008) Smart Automated Home. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Megat Samsudin, Megat Muhamad Shafiq (2016) Street Lighting System Using Solar Powered Led Light. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mejuwiner , Rimus (2005) 3D Visualization For Tsunami Disaster. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Melissa Sara Echa, Gabriel (2015) Robot Controlled Using DTMF Technique For Chemical Transportation Purposes. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mellvyne, Sigo (2007) Design For Manufacture And Assembly (DFMA) Evaluation Of Car Audio Front Panel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Melur Natasha, Jamaluddin (2009) Primary Injection -Evaluation Of A Current Transformer Saturation And The Effect To The Relay Performance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Memoria, Jangoh (2006) Design And Implementation Of An Automated Workpiece Pattern Recognition System Using Sensors And PLC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Menzi, Lee Meng Zhen (2015) Intelligent Vehicle Parking System Of All Shopping Complex In Malaysia With Radio Frequency Identification (RFID). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Meor Ahmad, Meor Akram (2017) Sleep Sensing And Alerting System For Drivers. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Meor Ahmad Salahuddin , Azmi (2010) Home Security Using SMS. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Meor Mohd Azwan , Sahran (2010) Application Of Value Stream Mapping (VSM) In Manufacturing Industry (Case Study : Jati Beringin Sdn. Bhd.). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Meor Muhsin, Fadzil (2011) Determination Of Vibration Input Power From A Structure-Bone Source. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mhd Faiz, Mhd Fazil (2012) Merekabentuk Alat Pengira Solat. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mhd Ghazali, Nor Ashikin (2016) Development Human Movement Support Using Android Technology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mhd Sharif, Mhd Alif (2018) Fabrication And Characterization Of Polyacrylonitrile Electrospun Nanofibers With Conductive Particles. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Milon, Forolan (2018) Profiling LPG Gas Sensor To Solve Industry Based Problem. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mimi Asmira Nasuha, Ramlee (2015) Energy Efficient And Low-Cost Web Server. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mimindiawanee, Mat Arub (2006) Sistem Kawalan Jauh Di Bilik Tidur Utama. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Minhad, Muhammad Suhaimi (2016) FPGA Based Implementation Of AES Encryption Algorithm Using Xilinx System Generator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mior Hasbullah , Yob (2008) Implementing Wireless Network At Universiti Teknologi Mara (UiTM) Campus Alor Gajah, Melaka Using Opnet Modeler. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mior Mohd Amin, Mior Lokman (2008) Wind Tunnel Test : Whether Between Simplified And Detailed Model Shows Any Difference In Coefficience Of Drag And Lift. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mior ShahrIl, Sulaiman (2010) Membangunkan Dandang Tiub Air Menggunakan Bahan Bakar Pepejal Buangan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mirfaizal , Chuchu (2007) Fault Diagnosis And Flow Induced Vibration In Submerged Vertical Pumps In A Power Plant. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mirni, Abdul Ghani (2011) Kajian Mengenai Daya Aerodinamik Pada Sayap Hadapan Kereta Lumba Menggunakan Kaedah Simulasi CFD. Project Report. UTeM, Melaka Malaysia. (Submitted)

Mirun, Nur Aini (2017) Investigation On Reliability Of Using Signal Processing As Refrigerant Pressure Detector. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Misbahul Munir, Nurul Qamariyah (2018) Design Of PID Controller With Integration Of Artificial Intelligence For Machine Tools Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mister, Mohamad Zali (2017) Energy Scavenging With Shoe-Mounted Piezoelectric Power Generator. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Moamad Izzudin, Abdul Hamit (2010) Mechanical And Microstructure Characterization Of Oil Treated Aluminium Alloy 7075. Project Report. UTeM, Melaka Malaysia. (Submitted)

Moey, Chung Min (2017) Investigation On Flexural And Morphological Characteristics Of Novel Hybrid Oil Palm Empty Fruit Bunch/ Kenaf Reinforced High Density Polyethylene Composite For Automotive Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Moganaganes , Sundaram Murgan (2009) To Investigate Effect On Surface Roughness For The Stainless Steel 304 Materials In CNC Lathe Machining. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohad Khalil, Mohad Khazin (2015) Root Cause Failure Investigation Of Boiler Super-Heater Tube In Coal Power Plant At Kapar, Klang. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad, Ismail (2010) Ergonomic Assessment In Manufacturing Industry (Jati Beringin Sdn. Bhd.). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad, Azrin (2016) Development Of Barcode Scanner Using Handphone. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad, Balqis (2018) Lean Implementation In Malaysia's Organizations : A Narrative Study. Project Report. UTeM, Melaka. (Submitted)

Mohamad, Ibrahim (2018) Development Of Modular Hull Of A Submersible Vehicle For Engineering Services. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad, Maziz (2016) Ultrasonic Based Distance Measurement System In Automotive Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad, Minhat (2013) Development Of A STEP-NC Controller System Framework And Implementation In UTeM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad, Mohamad Afif (2017) Development Of Public Transportation (Bus) Notification Using PIC Microcontroller. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad, Mohamad Roszulfadli (2016) Analysis Of Performance For Cart Gantry Crane System Using Scheduling Algorithm Via Controller Area Network (CAN). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad, Mohamad Roszulfadli (2016) Analysis Of Performance For Cart Gantry Crane System Using Scheduling Algorithm Via Controller Area Network (CAN). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad, Mohd Syafiq Syimir (2015) Finite Element Analysis Of Tray Cover Design For Digital Versatile Disc Player. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad, Sabiq Safiuddin (2016) Reduction Of Harmonic Using Single Phase Shunt Active Filter Based On P-Q Theory Method For PWM Cascaded Multilevel Inverter. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad, Sabiq Safiuddin (2016) Reduction Of Harmonic Using Single Phase Shunt Active Filter Based On P-Q Theory Method For PWM Cascaded Multilevel Inverter. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad Adam, Mohamad Rajuni (2009) Light Weight Manual Lifting Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Adha, Mohd Pekeh (2015) Analisis Pemindahan Haba Bagi Penukar Haba Dalam Aliran Yang Berayun. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Afiq, Shawaldin (2013) Investigate Surface Integrity When Machining FC300 Cast Iron Using Uncoated Carbide Ball End Mill - Study Of Subsurface Micrograph. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Ahyat, Amirul Nur Rashid (2008) Design A Line Following Mobile Robot With Distance Measurement. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Aidil, Mohamad Sohid (2014) Design And Development Of Energy Conversion System By Using Thermoelectric Generator (TEG). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Aidil , Abdul Jalal (2008) Design And Development Of Line Tracking Robot With Obstacle Avoidance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Aiman, Md Kassim (2012) Microstrip Patch Antenna. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Aisamudin , Shuhaimi (2013) Effect of carbon black on the properties of graphite-epoxy composite for bipolar plate. Project Report. UTeM, Melaka. (Submitted)

Mohamad Aizat Hazraf, Mohd Sukri (2015) Effect Of Sliding Speed On Tribological Properties Of Elevated Temperature Palm Kernel Activated-Epoxy Composite (PKAC-E). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Amaran, Siti Nurulheriza (2017) Factors Affecting Technology Transfer Success From Public Research Institute To SME. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad Amin, Abu Zaka (2012) Radio-Frequency Identification (RFID) Textile Tag Antenna. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Amiruddin, Nor Azizan (2009) Study Of Application Of Light Weight Concrete. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Amirul, Mohd Yusoh (2017) U-shaped patch antenna with rectangular paracitic patch and PBG structure at 2.4GHz for WiMAX application by using graphine. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohamad Anuar, Zainuddin (2007) Analysis of Surface Integrity of Aero Composite Material in Drilling With High Speed Cutting Tool. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Arif, Zainal (2008) Preliminary Study On Brake Squeal Noise For The Development Of Faulty Parts Indicator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Arif, Mohamad Rahim (2015) Intelligent Sumo Robot (SUMOBOT). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Ariff , Mohd Arshad (2007) Study On DC Motor Control System. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohamad Ariff Haikal, Badrul Hisham (2015) The Effect Of Cutting Parameter To The Hole Diameter Accuracy Of Aisi D2 Tool Steel In Drilling Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Ariff Shah, Mohamed Nazmi (2009) Conceptual Design And Development Of A Composite Drivetrain Differential Casing For Formula Student Race Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Arshad, Nornabihah (2016) An Investigation Of Corrosion Of Dual Phase Steel Welded Plate In 5% Concentration Of Sodium Chloride. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Asri, Hairil Hashimie (2017) Development Of Face Detection And Recognition In Home Security Using Surf Feature. Project Report. UTeM, Melaka. (Submitted)

Mohamad Asrul, Ahmad Siaman (2009) Automated Intrusion Monitoring System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Azam , Manaf (2007) Mini Wireless Weather Station (Part 2) : (Receiving And Processing Weather Data). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Azhri, Zulkifli (2006) A Pc Control System For Controlling Blinds On Windows. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Azlan, Muhammad Hafiz Hakimi (2017) Noise Reduction Design Of A Vacuum Cleaner. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohamad Azli, Che Azhar (2008) Merekabentuk Dan Membangunkan Sistem Gerudi Berpandukan Koordinat. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Azman, Mahmood (2005) Sistem Kawalan Litar Elektrik Berkonsepkan Sistem SCADA. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Azril , Mohamad Noor (2009) Development Of Robot Movement For Polishing Process Using Workspace. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Azwadi, Mohamad Nuzam (2011) A Study Of Friction Control For Damping System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Buhori, Fauzi (2007) Kajian Kelesuan Terhadap Logam Menggunakan Bebanan Mampatan. Project Report. UTeM, Melaka. (Submitted)

Mohamad Eezafri, Mohamad Fazee (2010) Design Optimization Using Finite Element Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Elfizi, Serat (2009) Kajian Ke Atas Bahan Buangan Sebagai Bahan Menjimatkan Tenaga Di Dalam Sektor Pembinaan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Ezwan, Yusoff (2012) A Small Scale Automatic Water System For Boiler. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Fadli, Ismail (2009) Wireless Gas Leaking Detector. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Fadlizan, Rosni (2009) Vibration Insulator From Natural Fiber Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Fadzli, Mat Jusoh (2006) Simulation Study On The Performance Of Flow Shop Scheduling. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Fadzli , Ahmad Radzi (2007) Suboscillation Method For 3phase Inverter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Fahmi, Mohamad Noh (2013) Short Circuit Current Protection Scheme In 500kV Transmission System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Fahrurrofiq, Imam Fauzi (2012) Modelling And Validating Of Vehicle Longitudinal Dynamic. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Faidzal, Razali (2010) Productivity Improvement The Implementation Of 7QC Tools At Communication Manufacturing Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Fais, Mohamed Zamri (2015) Penyiasatan Perambatan Gelombang Akustik Pada Struktur Konkrit Bertetulang Dengan Bar Keluli Tertanam. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Faiz , Adnan (2008) Improving Productivity Of Assembly Line In A Manufacturing Company (Printed Circuit Board Assembly). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Faizal Ahmad , Zainal Abidin (2008) Realibility Improvement Of Cockroft-Walton High Voltage Multiplier. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Faizan, Paiman (2007) Membangunkan Prototaip Mesin Penjualan Automatik Dengan Menggunakan PLC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Faizul, Mohamad Fouzi (2015) Blood Glucose Test Device Via Global System For Mobile Communication (GSM). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Faizul , Hussain (2007) Fluid Delivery Subsystem For Oryza Sativa Pesticide Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Faizul Fadzly, Salehudin (2011) Performance Of Semi-Active Control Of Railway Vehicle Suspension. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Farhan, Zulkipli (2009) Study Of Energy Absorption Of Bicycle Safety Helmet. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Faridz, Mohamad Nasir (2007) Merekabentuk Penapis Pasif Bagi Harmonik Dalam Sistem Pengagihan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Faris, Rahmat (2012) Performance Of VoIP In Wireless Multi-Hop Network. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Fauzi, Abu Bakar (2008) Study Of Acrylonitrile Butadiene Styrene Properties By Fused Deposition Modeling (FDM). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Fauzi, Abu Bakar (2008) Study Of Acrylonitrile Butadiene Styrene Properties By Fused Deposition Modeling (FDM). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Fazli, Husain (2009) The Influence Of Cu-Reinforced Aluminium Metal Matrix Composite To The Mechanical Properties, Corrosion Resistance And Microstructure. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Fazrie, Mahadi (2009) Strength And Safety Evaluation Of Automotive's Component Which Steering Knuckle And Material That Have Been Used. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Fikree , Alias (2008) Design And Development Of Gui For A Remotely Controlled Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Fikri, Nasir (2013) Development Of Slicing Machine Using Integrated Approach (Total Design). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Fikri , Mohamad Yunus (2009) Fabrikasi Dan Memasang Alat Pemampat Gas Petroleum Cecair (GPC). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Firdaus, Sukri and Yusmady, Mohamed Arifin and Aminurrashid, Noordin (2012) An Investigation of Energy Efficiency in UTeM's Industrial Campus Building Through Energy Management by Duty Cycling Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Firdaus, Abdul Ghaffar (2010) Design And Development Of Carbon Fiber Suspension Push Rod For UTeM Formula Style Race Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Firdaus, Mohamad Ramdzan (2015) Car Security Alert System. Project Report. UTeM. (Submitted)

Mohamad Firdaus, Sukri and Nur Rashid, Mat Nuri and Shafizal, Mat and Mohd Afzanizam, Mohd Rosli (2011) Development Of Thermoelectric Power Generator (TEG) Based Hi-Z Thermoelectric Modules For Automotive Waste Heat Recovery. Project Report. UTeM. (Submitted)

Mohamad Firdaus , Abu (2016) Renewable Energy Powered And Monitoring For Urban Kit System. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohamad Firdaus , Ghazali (2005) Internet Access Via Linux Wireless Access Point. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Firdhaus , Mohamad Lajis (2008) Performance Analysis Of Six Axis Industrial Robot. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohamad Firdzaus Syah , Yusuf (2007) Design And Development A Gadget Of Multi Effect For Musical Instrument. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Fozi, Nur Fazlina (2018) The Factors Influence Level Awareness Towards Car Users About Radio Frequency Identification (RFID) Tag In Kuala Lumpur. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad Hadzry, Othman (2005) Switch Mode Audio Amplifier. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Hafiz, Mat (2015) Automated Streetlight Malfunction Alert System (ASMAS) By Using GSM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Hafiz, Mohamad (2010) Determination Of Aerodynamic Drag Force Acting On Moving Heavy Duty Truck-Trailer In Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Hafizee , Yaacob (2007) Investigation Of Effectiveness And Cleanliness Of Automated Blow Fill Seal Process In Pharmaceutical Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Hairil, Mahat (2005) Peranti Kawalan Bagi Pengsuisan Kritikal Kapasitor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Hairulnizam, Halim (2015) Smart CCTV System Using Raspberry PI. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Hamdan, Yadzi (2007) Merekabentuk Sebuah Kerusi Tulis Yang Sesuai Digunakan Untuk Pengguna Bertangan Kiri Dan Kanan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Hamizan , Tuah (2009) Microstrip Bandpass Filter Design (Combline). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Hanafy , Saleh (2009) PC Based Electrical Drive Switching Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Hanif, Puzizer (2015) Fatigue Study Of Aluminium Alloy At Different Temperatures In Faculty Of Mechanical Engineering, Universiti Teknikal Malaysia Melaka. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Hanif , Othman (2006) Solenoids Direction Control System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Haniff , Harun (2010) Synchronization Of Compass Module With Pressure And Temperature Sensor System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Harith, Abdul Ghani (2009) The Improvement Of Existing Truing Jig Stand. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Harris, Misran (2011) Design Of A Stable High Gain Power Amplifier For WiMAX Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Harris, Misran (2011) Design Of Low Noise Amplifier For WiMax Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Hasman , Abdul Manas (2007) 8 Bit Microprocessor Design Using VHDL. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Hidhir , Mohamad Jamali (2008) Membangunkan Teknik Rawatan Air Terbuang Daripada Proses Pembasuhan Nata De Coco. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Husni Alhadi, Mohamad Hamiroel Nazrin (2017) Designing Data Logger For RTU System In Distribution Automation System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad Ilham, Mazlan (2015) Mini Site Survey Using Drone And Arduino. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Isa, Mohd Sa'ari (2017) Optimization Of Array Wearable Antenna Using Electromagnetic Bandgap For RF Energy Harvesting And On-Body Wireless Sensor Network. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Izani, Mohamad Azmi (2015) The Determination Of Suitability Condition For Cooling The Lightning Detection System Using Peltier. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Izwan, Ishak (2010) Development Of Interactive Machining Process Design And Machining Time Calculation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Izzat Afifi, Yasin (2013) Comparison Of Classic And Motion Tween Techniques In 2D Animation Global Warming. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Jamil, A Samad (2012) Wind Energy Charger For Rider (WECFR). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Jamil, Nur Najaa Mastura (2017) Effect On Vibration Amplitude In Aluminium Rectangular Plate Using Simulation Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Kadim , Suaidi (2011) Compact Multiband Antenna Design For RFID Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Kamal, Khalid (2011) A Study On The Effect Of Disc Geometry On Thermal Capacity Of Disc Brake Rotor Using Finite Element Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Kamal, Mohamad Ridzuan and Md Ali, Mohd Amran and Salleh, Mohd Shukor and Musa, Mohd Kamal (2018) Cooling Curve Thermal Analysis Of Solidification Processes On Commercial Aluminium Alloy. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad Kasyful Azim, Ahmad (2015) Smart Body Monitoring System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Khairi , Idris (2005) PIC Intelligent Battery Charger. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Khairon, Nur Nabilah (2017) Design And Development Of Mobile And Detachable Counter Balance Arm Sling For Neurological Patient With Hemiparesis. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad Khairul, Mohd Kamel (2015) Design And Development Of A Wireless Controller Module (Smart Home Networking With Webcam CCTV Surveillance). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Mahadi , Zahrin (2010) Static Analysis Of Moving Coil Linear DC Motor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Mukhlis, Abu Bakar (2010) Application Of Facility Layout Software : Case Study At Isuzu Hicom Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Musa , Suntong (2008) Microcontroller- Based Mechanically Scanned Led Flash Display. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohamad Mustaqiim , Che Hassan (2010) New Technique Of Plastic Mould For Thermoset Composite Fabrication. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Muzammir, Rosli (2015) Proposing A Single Minute Exchange Of Dies In Textile Manufacturing Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Nabil Fikri , Abdul Rahim (2008) Carbon Dioxide Laser Etch Drilling Of Mild Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Naim , Mohamad (2008) Time And Current Grading For Protection Relay Type MK1000 & MK2000. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Najib, Jasmani (2005) Design Of Residential-Sited Photovoltaic Grid Connected Suitable For Malaysian Environment. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Najib Fahmi, Ahmad Pisol (2015) Development Of Controller For Ground Water Well By Using Arduino. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Nashrik, Suhaimy (2012) Development Of Automotive ECU And Ignition Wiring System Training Module. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Nasrul , Hashim (2009) Fiber Optic As Electric Current Sensor. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohamad Nazeeb , Bolhassan (2006) Pulley System Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Nazer, Zulfadli (2018) Numerical Simulation Of Flow Inside Intake Manifold For Spark Ignition With PCC. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad Nazzrein, Abd Aziz (2010) Development Of LED Character Display For Traffic Light. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Noor, Mohamad Azrin (2017) Energy Harvesting From Asphalt Pavement Roadways Vehicle-Induced Stresses For Street Lighting. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad Noor, Mohamad Shah Nizam (2016) Tribology Studies Of Bio-Lubricant On Alloy. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Nor, Dalila Basirah (2017) Prediction On The Reliability Of Glove Dipping Machine Using Weibull Distribution. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Norani, Nor Ayu (2018) Design A Non-Electrical Table Fan. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad Nur Adli, Mokhtar (2010) Feasibility Study Of Generating Power From Renewable Energy For Irrigation Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Pzil, Nor Faezah (2017) Design And Analysis Of Thixoforming Alternator Housing Using Advance Casting Simulation Software. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad Qabil, Ismail (2015) Design Optimization Of Saddle Support For High Capacity Pressure Vessel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Radzi, Muhammad Faiz (2016) Reduce Car Cabin Temperature Using Reversed Automotive Blower Motor Powered By Solar Energy. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Razif, Abdul Rahim (2011) Home Control System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Razif, Mohd Jabar (2013) Simulation Of Displacement Control For Piezoelectric Actuator Using PID Controller (electronic resource). Project Report. UTeM, Melaka. (Submitted)

Mohamad Razif , Baharudin (2007) Analysis The Performance Evaluation Between Oil Based Coolant And Environmentally Based Coolant On Cutting Surface In Turning Operation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Razin, Rosli (2015) Guided Wave Defect Location In Plate Using Wavelet Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Razman, Mohamad Rudzi (2015) Alert Message By Using Wireless System For Pigeon Hole. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Rezduan, Mohd Jan (2011) Design And Development Of Embedded Control System For Controlling A DC Motor Using Microcontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Ridwan , Ramli (2013) Cutter Path Strategy For Machining Craniofacial Medical Implant PEEK Composite. Project Report. UTeM, Melaka. (Submitted)

Mohamad Ridzwan, Ishak (2007) A Comparison Of Mechanical Properties Between Kenaf Core Fiber And Kenaf Bast Fiber Reinforced Polyester Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Rizal, Mohamad Maskum (2005) Speed Controller For Single Phase AC Induction Motor Using PWM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Rizan, Mohd Akil (2005) Design And Fabricate The Wave Tank. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Roba'ie, Azrol Ashraf (2016) Smart Battery Monitoring System Using Arduino UNO (SBMS). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad Roba'ie, Azrol Ashraf (2016) Smart Battery Monitoring System Using Arduino UNO (SBMS). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad Rosli, Zatil Aqmar (2018) Design And Analysis Of Automated Optical Mark Recognition (OMR) System Using Image Processing Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Rozi, Mohamad Najmi (2016) Study Of Coefficient Of Friction Of Pure Bio-Lubricants Based On Banana Peel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Sahran , Kamilan (2008) Design A Multi-Detect Surface Algorithm For Home Vacuum Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Saiful Azhar, Harun (2005) Effect Of Tool Geometry, Material Hardness And Cutting Parameters On The Cutting Force Turning Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Saleh, Muhamad Ridhwan (2017) The Design Of The Agriculture Smart Mover Bodywork Structure Using Total Design Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Salleh, Mohammad Fazrin (2015) Design A Billing Estimation For Domestic Usage. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Sattar, Mohamad Rusydi Azim (2018) Development Of Mould To Fabricate Alumina Cutting Tool By Using 3D Printer Technology With ABS And PLA Material. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Sattar, Syarizal Azim (2016) Design And Finite Element Analysis Of Ergonomics Prosthetic Leg. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Shaferudin, Atiqah (2017) Assessment Of Renewable Energy Effect Of Grid Transient Stability In Malaysia. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad Shahrul Effendy, Kosnan (2010) Finite Element Of Human Spine CAD Model Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Shahrulnizam, Mohamad Hishammudin Yap (2015) Home Security Using GSM System With Camera. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Shaiful Faiz, Abd Rahim (2015) Smart Mini Automatic Vacuum Cleaner Using PIC Microcontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Shameel , Abdullah (2007) Merekabentuk Sistem Panel Solar Bergerak. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Mohamad Sharazmi, Sharudin (2006) The Design Of Power Supply Switch For 415V. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Sharifuddin , Ezham (2009) Mailbox Indicator With Remote Switch. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohamad Solehin, Mohamed Sunar (2014) Hexapod Motor Controller Using FPGA. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Syafiq , Mokhtar (2013) The effect of heat treatment on the microstructures and mechanical properties of copper alloy. Project Report. UTeM, Melaka. (Submitted)

Mohamad Syahrul Aswadi , Mohamad (2007) Pembangunan Aloi Ferus Terkimpal Dengan Retak Permukaan Sebagai Spesimen Ujian Tanpa Musnah. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Syazwan, Ahmad Yusri (2015) Biker Communication Device. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Tajuddin, Ramli (2015) Developing A Lego-Bot 3D Printer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Wahyee , Hamidon (2007) Design And Fabricate A High Torque Magneto-Reological Fluid Clutch. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Yusof, Izzat (2018) Effect Of Annealing Temperature On Structural Properties Of Aluminium Doped Zinc Oxide Nanoparticles Synthesized Via Sol Gel Auto Combustion. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Yusri, Ahmad Badarudin (2015) Development Of PC-Based Digital IC Tester Using Bluetooth. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Yusuf , Mat Yasit (2009) FTMK Mobile Complaint System. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohamad Zabidi, Muhammad Arif (2018) Analysis On The Efficiency Of IoT Based Trail Running Tracker. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Zafarid , Jaridi (2007) Kajian Tentang Kesan Perubahan Beban Ke Atas Enjin Terhadap Nisbah Udara-Bahan Api Dan Prestasi Enjin Pembakaran Dalam. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Mohamad Zaharudin , Sariman (2013) Position Tracking Of Slider Crank Mechanism By Using PID Controller. Project Report. UTeM, Melaka. (Submitted)

Mohamad Zainal Abidin, Syarafana (2017) Effect Of High Frequency Input Location For Crack Detection In Nonlinear Vibro-Acoustic Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Zarul, Drahman (2012) Processability And Characteristic Of Thermoplastic Reinforced Comminution For Out Of Condition Aerospace Grade Carbon Fiber Prepreg Waste Via Melt Compounding Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Zin , Zainal Abidin (2010) A Circular Microstrip Antenna. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Zoinol Abidin, Abd Aziz (2007) Design Of A Beamforming Network Using Butler Matrix. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Zoinol Abidin, Abd Aziz (2008) Design Of A Planar Meander Line Antenna. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Zoinol Abidin, Abd Aziz (2011) Design Of Parasitic Meander Line Antenna At ISM Band. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Zoinol Abidin, Abd Aziz (2009) Dual Polarization Microstrip Antenna for WLAN Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Zoinol Abidin , Abd Aziz (2011) Design Of X Polarized Antenna By Using Single Port And Single Layer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Zubaidi, Aziz (2008) Uncertainty Evaluation For The Measurement Of Gauge Block By Micrometer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Zufri, Abd Rahman (2014) Omni Directional Control Algorithm For Mecanum Wheel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Zuhaili, Jamaluddin (2015) Simulasi Ujian Impak Menggunakan Analisis Unsur Terhingga Pada Roda Rim Aloi. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Zulhilmi, Abdullah (2011) Computer Integrated Manufacturing (CIM) - Development Of Monitoring System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Zuric Adham , Mat Esa (2013) Alat Penghilang Sakit Belakang. Project Report. UTeM, Melaka. (Submitted)

Mohamed, Amir Syahir (2017) Development Of Smart Baby Cradle By Using PIC16PF877A Controller. Project Report. UTeM, Melaka. (Submitted)

Mohamed, Anis Atiqah (2017) Real Time Of Drowsiness Recognition System Based On Electrooculography. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamed, Hazim (2016) Preliminary Investigation Of Visual Features For AGV Localization Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamed, Mohamed Abdalla (2017) Exploring Technology Transfer Into Somalia Based On Theory Of Destruction. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamed, Nurul Amira (2016) Controlling Vacuum Technology By Using Android And Bluetooth Device. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamed Abdul Ghani, Nik Muhammad Hazwan (2017) Tribological Properties Investigation For Nanoparticle Enhanced Natural Oil-Based Lubricant. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamed Aizat, Mohamed Zahir (2011) Preparation And Characterization Of Banana Fiber Reinforced Polypropylene Composites. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamed Alifuddin, Azie Aslinda (2018) Design And Analyze Of Ultra-Wideband Antenna For Medical Applications. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamed Amin Tawakkal, Nursyafiqah (2016) Application Of Ergonomics Principles For Workplace Arrangement Of Bicycles Workshop. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamed Aripin, Muhammad Nawi (2017) Fabrication Of Suspension System For The Palm Oil Plantation Agriculture Smart Mover Through Experimental And Numerical Prediction. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamed Ayub Khan, Muhamad Haziq (2017) Response Surface Model (RSM) Of CO2 Laser Cutting. Project Report. UTeM, Melaka. (Submitted)

Mohamed Azmi, Said and Marizan, Sulaiman and Muhammad Herman , Jamaluddin (2007) Design Of Vision Guided Manipulator For Optimal Dynamic Performance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamed Azraai , Ahmad Puad (2008) Linear Motion Based Sensing Techniques. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamed Bukhary, Amsyar Arif (2018) Development Of Empty Oil Palm Fruit Bunches (EFB) Segregation Using Machine Learning. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamed Faiz, Mohamed Musa (2015) Fire Alarm With Security System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamed Hairi, Mohamed Azelan (2016) Mircostructural Morphology And Mechanical Properties Of Rheocast A319 Aluminium Alloy. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamed Hariri, Muhammad Faeez (2015) A Study On Energy Efficiency For Lighting In Small Scale Room Using Lumen Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamed Ishack, Mohamad Nidhzam Faris (2017) Real-Time Human Machine Interaction For Robotic Arm. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamed Izham Hafiz, Mohamed (2015) Design An Interleaved Buck Converter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamed Naufal , Omar (2007) Pick And Place Robotic Arm Controlled By Computer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamed Nazari, Munira (2008) Portable Water Filter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamed Redza, Abu Talib (2005) Design And Develop Electronic Ballast For Lighting System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamed Sabri, Mohammad Fadhil Hanafi (2015) Design An Application Of Microperforated Noise Silencer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamed Shukor , Omar (2005) Smartair Wireless Authentication System. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Mohamed Sobhi , Mohd Noh (2006) The Development Of A Hydraulic Gear Pump. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamed Yusof, Yushaizul (2017) A Study On Acceptance Towards Consumption Of Natural Gas Vehicles Among Car Drivers In Melaka. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad, Firdaus Ahmad (2011) Development Of All-Terrain Robot Using Legged Motion For Military Purpose. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad, Khairuddin (2016) E-Sajadah. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad, Mohamad Riduan (2015) Study The Potential Of Submerge Pico Hydro Generation System In Water Pipeline. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad, Muhammad Azrain (2016) An Investigation On Corrosion Of Low Carbon Steel Welded Plate In Sodium Chloride Solution. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohammad, Muhammad Nur Azizi (2016) Development Of A Framework For Remanufacturing Of LCD Monitor At The Disposal Stage. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad, Rohmanuddin (2005) The Development And Simulation Of Fuzzy Control Coordinator For Multi-Controller System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad, Sabarariah (2016) Verification Of Vipcoda Software By Using Standard Design Procedure. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohammad 'Akashah, Abdul Wahab (2005) 2D Animation "The Story Of Si Tanggang". Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Adib, Salikon (2015) Design Of Remotely Underwater Vehicle (ROV) Using Embedded System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Afiq , Hashim (2008) Underwater Remote Operating Vehicle. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohammad Aizad, Mohammad Idris (2009) Automatic Satellite Signal Tracking System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Aizrulshah, Kamaruddin (2013) Design And Optimization Of Runner And Gating Systems For The Permanent Mold Casting. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Akashah , Noordin (2007) Computer Aided Design And Facrication Of Microwave Balanced Mixed. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Al-Amin, Salleh (2009) Automatic Refilling Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Arsyan, Kamaruzaman (2009) Heat Insulator From Natural Fiber Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Asa'ari , Rahmat (2009) Study Of The Epoxy Resin Bonding Process Of Aluminium Alloy : Chemical Pickling Process (Sulphuric Acid). Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohammad Asyraf, Omar (2009) Investigate Blade Failure In Axial Compressor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Azim Shukri, Mohd Kamal (2010) Feasibility Study And Design Development On Automatic Feeder's Mechanism For Goat Breeding. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Azrol, Ahmad (2013) Dual Maximum Power Point Tracking : Focus On Dynamic MPPT. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Azwan Safwan, Harun (2015) Optimization Of The Fabrication Process Parameters Of An Optical Modulator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Fahmi, Daud (2011) Study A Pneumatic Muscle Actuator And Simulation For Insect Walking Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Fahmy , Uzair (2006) PC based remote control car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Faisal, Ismail (2013) Secure And Wireless Student Attendance System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Faisol, Ghazali (2007) Pengesan Objek Logam. Project Report. UTeM, Melaka. (Submitted)

Mohammad Faiz, Samsuddin (2008) Proses Penghasilan Acuan Dari Rekabentuk Produk Sehingga Terhasilnya Produk Dengan Penggunaan CAD/CAM (E-Manufactuing). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Faiz, Shamsudin (2011) Hand Tool Assessment Of An Object Handling Task. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Faiz, Yahani (2012) Microstructure Analysis On Heat Treated Carbon Steel Material Subjected To External Flame Heating Process (Due To Warpage Control). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Fajar, Sariman (2012) Merekabentuk Dan Fabrikasi Casis Kerangka Ruang Kereta Lumba Elektrik Formula Varsity UTeM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Fakhri, Abd Ghani (2008) Design And Develop A PICO Hydro Generation System Using Permanent Magnet Aternator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Farkhan, Daem (2011) Ergonomics Study Of Cockpit Arrangement For UTeM Formula Varsity Race Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Fauzi, Intan Nurhazirah (2016) Development Of Arduino Based Alert System For Heat, Flame Detector And Gas Leakage. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Fauzi , Awang (2007) Merekabentuk Sistem Pengawal Untuk Lif Menggunakan PLC (Programable Controller) & FLC (Fuzzy Logic Controller). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Fazli, Sahbuddin (2008) Design 15-Way Infra Red Remote Control. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Firdaus, Mat Din (2005) Simulation Of Metal Oxide Varistor Dynamic Behavior Under Fast Transients. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Firdhaus, Hajan (2009) Development Of Sieving Machine For Palm Oil Mill Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Firdhaus , Sulaiman (2008) Mobile Signal Cancellation Device. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohammad Fitri, Mohamed Ridzuan (2011) Development Of An Automotive Clutch Actuator Using Shape Memory Alloy (SMA) Material. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Fuad, Jamingan (2007) Design 3 Finger Gripper For AGV. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Fuad, Nazif (2016) Effect Of Engine Control Unit (ECU) On Engine Performance For Naturally Aspirated Engine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Hadi , Abd Halim (2009) Maintenance Strategy Development (MSD) Using Reliability Centered Maintenance In A Power Plant : A Holistic Study. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohammad Hafiz, Basir (2008) Investigate The Effect Of Layer Thickness On Mechanical Properties Of Parts Produce Using RP 3D-Printer Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Hafiz, Mohamad Elias (2008) The Effect Of Re-Artificial Aging Time On The Impact Toughness Of An Aluminum Alloy For Automotive Applications. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Hafiz, Abdellah (2010) Selection Of Difference Equation Minimum Model Specification By Correlation Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Hafiz, Zulkefli (2015) GUI Controlled Mobile Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Hafizuddin, Ahmad Sabri (2008) Pick And Place Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Hafizuddin , Shammuin (2013) Insulation materials for home residence building wall. Project Report. UTeM, Melaka. (Submitted)

Mohammad Hanif, Mazlan (2012) Substrate Integrated Waveguide With Defected Ground Structure For Microwave Filter Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Haniff , Hasni (2010) Radar System Simulation Using MATLAB. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Harith , Amlus (2008) Laser Cutting Of Woods. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Hazman , Hashim (2008) Smart Car Seat. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Helmi , Jabri (2005) Wireless Bandwidth Monitoring. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Mohammad Helmy, Mohammad (2005) Simulation Of Photovoltaic System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Hilmi, Mohammad Hami Hamizan (2016) Development Of Flood Warning System To Residents Based On Database. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Iskandar, Seni (2007) The Study of Mechanical Properties and Microstructure of Thermal-Curing Process on Natural Fiber (Kenaf) Reinforced Thermoset Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Khabib , Khalib (2008) Study On Boronizing And The Kinetics In Low Alloy Tool Steel. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohammad Khalid, Khambali (2010) Investigation Of Fatigue Crack Growth On Heat Treated Aluminum 7075 With The Effect Of Corrosion. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Muhaimin , Harun (2010) Study And Implementation Of Touch Panel That Generates Electricity To Charge Gadget. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Nadzrul Izamuddin, Najmuddin (2011) Textural Investigation Of Carbon Nanotube Using Nitrogen Adsorption Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Najib, Abu Mansor (2007) Robot Humanoid CS8 (Bahu Fleksibel). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Najib, Ishak (2005) Experimental Studies Of Thermal Contact Resistance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Nasiruddin, Mahfoz (2009) Gantry Crane With On-Off Motor Command : Design And Implementation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Nazri, Razali (2012) Resistivity Analysis In Layered Soils. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Nazry , Rosley (2013) Total design of Water Tank Leaning Robot (WATCLEAR). Project Report. UTeM, Melaka. (Submitted)

Mohammad Nizam, Shamsuddin (2010) Development Of Manual Transmission Powertrain Dynamic Model For Drive Simulator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Nizar, Muhammad Safwan (2017) Influence Of Tire Stifness And Sprung Mass On Vehicle Ride Performance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Nur Rasyid , Samsudin (2011) Design Optimization Of Manual Wheelchair Frame Using DFA Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Qayyum , A. Shukor (2008) Normal Mode Analysis Of An Exhaust Pipe. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohammad Rafi, Omar (2012) Merekeabentuk Dan Membangunkan Galah Komposit Ultra Ringan Untuk Tujuan Penuaiaan Buah Kelapa Sawit. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Rhiyaad, Kamshah (2007) CSB Humanoid Robot (Leg II). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Rosli, Muhammad Hafizi (2017) Correlation Between Surface Roughness And Dust Build-Up In Fabric Duct And Galvanized Steel Duct : A Comparison. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Roszwan, Jamaudin (2010) Automatic Modern Garbage System Collection. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Rozainee , Othman (2007) FMS 200 Output Count Display. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Mohammad Ruzaini , Razali (2009) Development Of Thermoelectric Cooler. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohammad Sa'at , Noor Radziah (2015) Design Of A Smart Indoor Gardening System Via PID Control Scheme. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Sabri, Muhammad Haziq (2016) Car Counting Using Camera. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Shah Izham, Abdull (2008) A Feedback Control System For Suppressing Crane Oscillations With On-Off Motors. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Shokri, Mohammad Amirul Syafeeq (2014) Implementation Of Smart Inventory Management System For Efficiency Enhancement : A Case Study Of SmartBin In Cohu, Inc Semiconductor Equipment Group, Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Sukeri, Ahmad Nurfaidhi Sadiq (2017) Design Optimisation Of Car Jack System For An Emergency Usage Using PDS. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Sukery, Nur Munirah (2016) Preliminary Study On The Capability Using Lube Oil Base On Local Virgin Coconut Oil For Transmission Applications. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Syafieq, Sazali (2015) Anthropometric Dimensions And Preferred Working Surface For The Lecturer Office. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Syafiq, Halim (2008) Tool Wear Characterization Of Carbide Cutting Tool Inserts In A Single Point Turning Operation Of Aisi D2 Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Syafiq, Ramli (2012) Merekabentuk Dan Menganalisis Rod Penghubung. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Syahid , Abdul Jamil (2010) Semi-Auto Robot For Robocon. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Syazwan, Omar (2008) Force Analysis On Robotic Deburring Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Yusof, Abu Bakar (2011) Measurement And Comparison Between Wireless Network Security (MAC, Address Filtering, EAP-TTLS, PEAP-MSCHAPv2 (IPsec) ). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Zaidi, Fatin Syazwani (2016) Design And Development Of An Antenna At 900MHz For Short Range Wireless Communications. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Zamzuri, Noor Adilah Yasmin (2017) Tolerance Stack Analysis Using Tolcap Software For River Trash Collector System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Zul Aizam , Mazlan (2009) Design Of Car Wiper Speed Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammed, Sari Abdo Ali (2015) Recognition Of Face Detection System Based On Video. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammed Abbas, Saddam Hamood Ali (2017) Effect Of Defect Orientation In Pipe On Acoustic Wave Propagation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammed Al-Ghaili, Munir Mohammed (2017) Experimental Studies On The Noise Characteristics Of Ball Bearing Under Hexagonal Boron Nitride (hBN) Nanoparticle Additives In Engine Oil. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammed Ashraf, Mohammed Faudzi (2015) Parametric Optimization Of Abrasive Waterjet Machining (AWJM) On Aluminium Using Taguchi’s Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammed Azim , Ahmad (2007) Modul E-Pembelajaran Bagi Pembelajaran Aliran Beban. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammed Imtiaz, Mohd Ibrahim (2012) IP Nation Located. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammed Khir, Siti Sakinah (2017) Application Of Programmable Logic Controller (PLC) On The Low Voltage Distribution Automation System (DAS). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohammed Nasser, Ahmed (2013) Automated Kids Tracking System Using Androids (KiTSA). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammed Umar-Hassan, Mohammed Rosdi (2013) Glove Control Helicopter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammeed Azizi , Rudy Abdullah (2009) Design Improvement On A Product Using DFMA: Industrial Machinery. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohandas , Sagaran (2009) Development Of Control System For Sepak Takraw Launcher Model. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohanraj, Letchimenan (2013) Design And Develop An Integrated Utility System (Energy Meter). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohazam, Mohamad (2005) Kawalan Kelajuan Motor Arus Terus Menggunakan Komputer Port. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd, Najwa Norhanani (2016) Planar Antenna Design For Short Range Device (SRD) Of Wireless Communication. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd, Siti Zaharah (2017) Effect Of Wire EDM Process Parameters On Machining Charateristics Of Aluminium Alloy 6061 Using Taguchi Method. Project Report. UTeM, Melaka. (Submitted)

Mohd A'idil , Osman (2009) Design And Development An Interactive Telephone Based Remote Control And Security System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Abdah, Ahmad Taqiyuddin (2016) Design And Development Of Wireless Switching Control (WSC) Using Smartphone. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Adib, Tukiran (2009) Development Of An Automated Keropok Lekor Cutting Machine Using Pneumatic System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Adib Muizzuddin, Mohlis (2008) Predicting Turbulent Flow In A Staggered Tube. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Adib Sulhy, Mohd Zin (2009) Microcontroller Based PI Battery Charger For Solar Power Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Adil, Mat Ti (2010) Web-Based Room Appliances Controller System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Adil , Mat Noor (2007) The Impact Of Embedded Generation On Existing Electrical Distribution Network Network. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Adiran Aswad, Ismail (2012) Study And Design Of Robot Gripper Using SMA Actuator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Adlisyah , Mohd Ramli (2007) Fingerprint-Based Attendance Monitoring System. Project Report. UTeM, Melaka. (Submitted)

Mohd Adnan, Amru (2009) Analysis And Development Of Hydro Power Simulator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Adnan Hafiz, Zahari (2015) A Study On The Effect Of Coconut Fiber To Polypropylene (PP) As A Friction Material. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Adri , Mohd Fuad (2008) Design Of Hybrid Power Supply For Home Appliances. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Adzhar, Saiman (2012) Design And Develop A Smart Auto Femasi System (Feeder Machine With Solar Integrate & Interface With GSM). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Adzwan, Addly (2008) Quenching- Tempering Effects On Fracture Properties In Carburized Low Carbon Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Afdhal, Shamsudin (2009) The Design And Development Of Engine Intake Manifold For Proton Wira. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Affendy , Samdin (2008) Study Performance of Cylindrical Grinding On Straightness. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Affi, Mohd Ali (2009) An Autonomous Vehicle Using Wall Following Detection. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Afif, Abdul Wahab (2008) Analysis Of Hand Strength For Pinching Activity. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Afzanizam , Hamdan (2009) Performance Of Scaled Conjugate Gradient Algorithm In Face Recognition. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Ahadlin, Mohd Ahassolehin (2016) Characterization Of Used-Engine Oil Enhance By Using Zirconia Nano-Particles. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ahadlin, Nur Farahin (2017) CFD Simulation Of A Shell And Tube Heat Exchanger; Effect Of Physical Features. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Aidil Jahari, Abdul Hamid (2005) Comparison For Water Pump Prime Mover For Irrigation Of Paddy Field System On Jabatan Pengairan Dan Saliran Malaysia (JPS). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Aiezatt Danial, Ramizan (2011) Karaoke Machine Tool. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Aimi , Ubaidillah (2009) Rekabentuk Pengoptimuman Sistem Penghantaran Kuasa Mesin Pemadam Kebakaran. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ain , Kamaruddin (2009) Analisis Risiko Daripada Sudut Kualitatif Dan Kuantitatif Terhadap Teksi NGV. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Aizat, A. Hamid (2008) The Study Of Size Effect On Surface Finish When Hard Turning Aisi D2 Tool Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Aizat, Ahmad Murad (2008) Automatic Can Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Aizat, Ibrahim (2012) Comparison Between Concentrating Solar Power And Photovoltaic For High Power Solar Energy Harvesting. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Aizat, Mohd Noor (2010) Device For Heat Removal For Parked Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Aizat, Zailan (2012) Modelling DC Motor Variables (Voltage, Torque, Efficiency) To Compare Between Nelder-Mead Method And Powell's Method Of Optimization. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Aizat , Mohd Ibrahim Merican (2011) Machining Process Design And Costing (Milling Operation). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Aizat , Ahmad Tarmizi (2007) Simulation And Study On Puma Robot Configuration With Workspace. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Aizuddin, Abd Razak (2009) Design And Product Development Of Product (s) Through Concurrent Engineering Tools And Methodology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Aizuddin, Yusof (2010) Application Of Gyroscope Technology In Human Mobile Transporter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Aizuddin , Muntaha (2008) Rekabentuk Nozel Semburan Berputar. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Akhir, Muhammad Hafiszan (2015) Car Seat Security System For Unattended Child Using GSM Module. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Akmal , Ab Halim (2007) Pengesanan Perambatan Retak Dalam Aluminium Tempatan Yang Dilindapkejut Dengan Menggunakan Teknik Pengesanan Visual. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Akmal , Zainal Abidin (2010) PLC Application For Flood Detection And Protection Via Communication System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Akmal Hisyam , Norruddin (2010) Friendly Aquarium Control System Using PIC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Akram, Mohd Noh (2015) Development Of Auto Filling Water System Using PIC16F877A. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Akram Zaki, Mohd Sabri (2008) Performance Analysis Of Evaluation Between Oil Based Coolant And Combination Of Oil Based Coolant With Palm Oil On Cutting Surface In Turning Operation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Al Fainan , Mustapha (2010) Thermal Analysis On Thermoelectric Cooling Module. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Al Hafiz , Osman (2008) Modelling Rayleigh Fading Propogation And Effect In Wireless Communication Channel Using Matlab. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Al Mustaza, Muda (2004) Portal MYKUTKM. Project Report. UTeM, Melaka. (Submitted)

Mohd Al-Amin , Mat Dris (2009) Flame Imaging Using Combination Of LED Optical Sensor. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Al-Jufri , Md Zin (2008) Pengesanan Dan Pengawasan Alat Pengesan Bilik Tertutup. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ali, Rosli (2013) Wear Behavior of Carbon Nanotube (CNT)Short Natural Fiber Reinforced Epoxy Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ali, Muhammad Zakiy Izzuddin (2017) Design And Control Of Radio-Frequency Identification Based Conveyor Platform On Automated Guided Vehicle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ali, Noor Khairul Nisa (2017) Improving Mechanical Properties Of Fused Deposition Modeling Printed Part With Optimized Parameter. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Ali, Nurul Ain (2016) Development Of Support Instrument For Petanque. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Aliff, Abdul Rahman (2011) Software Comparison Host Based Intrusion Detection System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd All Fadzil, Nasir (2009) Power Factor Correction For Various Type Of Magnetic Flux Ballast Flourescent Lamp. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Almirul, Halid (2012) Line Follower Robot With Proportional, Integral and Derivative Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ameer Aiman , Ruhaizi (2013) Improving stability of water based nanocarbon using OH-CNT modifield with polyvinyl pyrrolidone as a dispersing agent. Project Report. UTeM, Melaka. (Submitted)

Mohd Ameeraldeen , Mohd Salleh (2010) System Development Of Parallel Robot With Industrial Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Amer, Muhammad Syahrul Nezar (2017) DOE Approach In Determination Of The Optimum Welding Parameters For Three Layer Spot Weld. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Amerrull, Ismail (2009) Aerodynamic Study On An Aircraft. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ami, Ahmad Lawi (2012) Wireless Intelligence Home Security Integrated With Global System For Mobile (GSM). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Amin, Muhd Kamaruddin Pater (2009) Merekabentuk Sistem Stereng Depan Bagi Kereta Lumba Formula Pelajar. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Amin, Ahmad Nawawi (2016) Design And Analysis Effect Of Front Area Of Land Rover Defender On Aerodynamic. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Amin, Muhammad Aiman Ashraf (2017) Design And Develop Fire Alarm And Monitoring System Based On IoT. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Amin, Muhammad Murtadza (2017) Experimental Investigation On Vibration And Shock Test On Packaging Products. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Amin Ridhuan , Azmi (2007) Perolakan Haba Semulajadi Yang Berlaku Dalam Satu Kotak Tertutup Dan Mempunyai Sumber Haba Berdiskret Di Dalamnya. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Aminuddin , Ibrahim (2012) Development Of Earth Leakage Circuit Breaker Auto Re-Close With Metering. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Aminudin , Abdullah (2010) The Implementation Of Risk Management At Aerospace Manufacturing Company : Case Study 2 (Process). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Amir, Nadia Syahida (2017) Effect Of Parameters On Properties Of Sheet Metal Welded By Rocker Arm Spot Welding Machine. Project Report. UTeM, Melaka. (Submitted)

Mohd Amir Hazim, Mat Taha (2011) User Interface For Dbas Data Collections (Alert System Interface). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Amirul , Awang (2009) Analysis And Simulation On Impact Collision Of Multi-Purpose Vehicle (MPV) As NGV. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Amirul Asyraf, Mohd Zakhi (2013) Preparation And Characterization Of Thin Hard Density Board From Paddy Husk. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Amirul Asyraf, Mohd Zakhi (2013) Preparation And Characterization Of Thin Hard Density Board From Paddy Husk. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Amirul Faruqi, Ismail (2012) A Study On Current Carrying Capacity Of Double Layer PCB. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Amirza, Muhammad Idzuan Ariff (2017) Energy Usage IOT Monitoring System For Domestic Tariff In Malaysia. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Amizu , Mamat (2010) Smart Drink Dispenser Using GSM Modem. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Ammar, Mohd Zakaria (2010) Pick and Place Robot Using Line Tracking. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Amran, Ali (2008) Development Of Acrylic Plastic Injection Mould Base For Education Purpose. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Amran , Mohd Zawawi (2007) Paparan Elektronik Menggunakan Mikropengawal. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Amri , Mohamed Khairi (2009) Design And Analysis Of Safety Mobile Platform. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Amri , Sulaiman (2009) Design And Development Of An Automated Whiteboard Eraser. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Anis, Mohamed (2014) Real-Time Object Tracking System For 2-Degree Of Freedom (DOF) Robotic Arm. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Anuar, Intan Munirah (2017) Development Of An Automatic Irrigation Sprinkler System For Corn Farm Using Arduino. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Anuar, Omar (2011) Race Car Semi-Active Suspension Control System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Arif, Nor Hidayu (2017) A Statistical Model For Deterimining Friction And Wear Of SK 11 In Engine Oil. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ariff, Ahmad (2012) Analysis And Design Mechanism Of Supporting Cantas. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ariff, Radzuan (2013) Stable Walking Motion NAO Humanoid Robot Using Cubic Polynomial Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ariff , Arshad (2010) Comparison Between Combination Silencer And Single Type Silencer For Two-Stroke Noise Reduction And Its Effect On Engine Power Curve. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Arizam , Abu Seman (2008) The Development Of Visual Indicator For Engine Maintenance In Cars. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Arshad, Mohd Khairul Azmi (2008) Microstructural Characterization Of Corrosion Products For Natural Gas Pipelines In Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Arshad, Noorazian (2016) A Study On Relationship Between Hand Pressure Grip Force With Hand Tool Vibration At Automotive Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Asannnan, Fitrasari (2017) The Application Of Pineapple Fibre Polypropylene (PP) Composite For Fabrication On Interior Part Of Automotive Component. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Asari, Nurul Asniza (2017) Demand Side Management Energy Profile Optimization. Technical Report. UTeM, Melaka. (Submitted)

Mohd Ashaari, Omar (2010) Effect Of Chromium Carbide (Cr23C6) Formation On The Microstructure And Corrosion Passivity Behavior Of AISI 316. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ashaari, Omar (2010) Effect Of Chromium Carbide (Cr23C6) Formation On The Microstructure And Corrosion Passivity Behavior Of AISI 316. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ashmawi, Baharuddin (2008) Generation And High Voltage AC Tecs On Insulator (Plywood). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ashraf, Mohd Razali (2011) Vehicle Security Alert System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ashraf , Abd Kadir (2008) EDM Performances Of Copper Electrode On Different Materials. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ashraf , Mohd Fauzan (2008) Co2 Laser Engraving Of Stainless Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ashraff, Che Hashim (2009) Preliminary Study On Power Train System For Electric Vehicle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Asmuny, Mohamad (2012) Pembangunan Data Pengawasan Fotovoltan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Asnawi, Omar (2006) Manufacturing Modeling And Simulation In Manufacturing Industry Case Study : Storage Area. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Asraf , Abd. Samad (2008) Mencipta Dan Memajukan Alat Penghantaran Dan Pengisian Mudah LPG Dari Tangki Komersial Ke Tangki Kenderaan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Asraf , Jasni (2008) Automated Guided Vehicle (AGV) Using PLC System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Asri, Siti Nur Izyan (2016) Solar Powered LED Decorating Light. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Asuad , Idris (2006) Projek 'Snakes Robot'. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Asyraf, Ruslan (2009) The Study Of Comparative Analysis Of Boothroyd Dewhurst (BD) Design For Manufacture And Assembly (DFMA) Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Asyraf, Asidin (2015) Development Of Emission Inventory Of Major Air Pollutants For Industry In Malacca History City Council. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Audi Aizat, Mohd Zim (2012) An Investigation Of Defects On Butt Joint Of Different Welding Technique Using Ultrasonic Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azaha, Abdul Ghani (2004) Simple Firewall System. Project Report. UTeM, Melaka. (Submitted)

Mohd Azahar, Mohd Noor (2010) Gantry Crane System Using Real Time Command Shaping. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azali, Noor Syahida (2016) The Impact Of Different Octane Numbers On Performance And Emission Gasses On The Naturally Aspirated Engine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azali , Zainal Abidin (2009) Signal Indicator For Home Appliances Control. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Azam, Muhamad Ammar Farhan Maula (2017) Synthesis Of NaxCoO2 Thermoelectric Via Citrate-Nitrate Auto Combustion Reaction. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Azam , Roslan (2007) Dynamic Characterization Of Two Dimensional Flexible Plate Structure Using Neural Network. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azariman, Abd Karim (2008) Earthquake And Tsunami Warning System via SMS. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azarul Syazari , Che Aziz (2013) The effects of ice formation on airfoil performance. Project Report. UTeM, Melaka. (Submitted)

Mohd Azemi, Muhammad Naqiuddin (2017) Investigation On The Performance Stainless Steel Impact Test Vibrational Analysis Using MATLAB. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azha, Nur Shamira (2016) Notable Liquid Sensor Development Using Fiber Optic Sensor Applications For Brake Oil Test. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azham , Azmi (2008) Investigation Of Mechanical Properties Of Aluminium 2024 - Stainless Steel 304 Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azhar, Abd. Aziz (2006) Universal Measuring Machine : A Study On Potential Error And Common Error In Calibration Process (Gage Block). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azhar, Abdul Hamid (2007) Pembinaan Perisian Audit Bagi Sistem Pencahayaan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azhar, Ahmad (2012) Diagnosis Of Centrifugal Pump Failures Using Vibration Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azhar, Mohd Zubir (2006) Mechanism Design And Analysis of HVAC Inspection Crawler. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azhar, Mohd Azmi (2005) Merekabentuk Litar Gerakan Langsir Automatik. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azhrul, Mohd Alias (2008) Numerical Simulation Of Combustion Process In A Furnace. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azidin , Che Ismail (2008) Design And Development Of Automated Submission Assignment Depositor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azidin , Che Ismail (2008) Design And Development Of Automated Submission Assignment Depositor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azim, Ridzwan (2008) Design And Development Of An Automotive Seat For Safety. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azinuddin, Ismail (2009) Kajian Model Bentuk Piawai Menggunakan Prototaip Pantas. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Aziri, Muhammad Hasif (2015) Design And Develop Robot Tracked Vehicle Platform For Navigation And Rescue Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azizi, Abd Aziz (2012) Design And Develop The Load Detail Calculation Software For Contruction Field. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azizi, Kasmuri (2011) An Investigation Of The Hot Dip Galvanized Product (Stay Plate) At Jati Beringin Sdn. Bhd. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azizi, Md Kosri (2011) Automatic Cat Litter Cabinet. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azizi, Abd Aziz (2006) Optimizing The Stiffness And Strength In Bumper Beam Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azizi , Omar (2009) Mereka Bentuk Basikal Roda Tiga Hibrid Yang Dijanakan Oleh Dwitenaga Iaitu Tenaga Manusia Dan Tenaga Elektrik Untuk Kegunaan Di Bandar. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azizi , Jali (2007) Design For Manufacture And Assembly Of Air Freshener Dispenser. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azizie , Muhammed Pauzi (2007) Warning System For Barrier Distance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azizul, Hamzah (2011) An Experimental Study Of A Steering Wheel Vibration For UTeM Formula Varsity Race Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azizulrahman , Ayub (2005) Obstacle Avoidance PIC Mobile Robot Control. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azlan, Ahmad (2013) Water Tank Level Monitoring System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azlan, Mior Hamdan (2013) X-Band Filter Using Parallel Coupled-Line Technique With DGS. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azlan, Mohd Akhir (2012) Investigation Of Parameter That Affecting Air Flow Around Vehicle Frontal Area. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azlan, Ahmad Zarron (2010) Low Cost Flood Alert via SMS. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azlan , Awang Su (2008) Pembaharuan Rekaan Ke Atas Produk Tempatan (Rekaan Baru Ke Atas Telefon M-Mobile). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azlan , Mohamed (2010) Design Of Rigid Board Material From Banana Tree Trunk Fiber. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azlan , Daud (2008) Develoment Of Pick And Place Pneumatic Manipulator Trainer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azli, Salim (2012) Development Of Suppression System For Noise And Vibration In Automotive Flexible Wiper. Project Report. UTeM. (Submitted)

Mohd Azli, Salim (2012) Dynamic Analysis Of Laminated Rubber-Metal Spring On High-Rise Building. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azli , Mohamad @ Ismail (2007) Fish Robot-Prototype. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azman, Abdullah and Muhammad Herman, Jamaluddin (2011) Hardware-in-The-Loop of Active Pantograph Experiment for High Speed Railway Vehicle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azman, Abdullah Haziq (2017) Feasability Study Of Using Vegetable Oil As A Cutting Lubricant On Conventional Lathe Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azman, Mohamad Azizuddin (2017) Design Of Underwater Inspection Robot Mechanical Track System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azman, Mohamad Huzaifa (2016) A Study Of Cobalt Catalyst Preparation For Carbon Nanotube Powder Growth By Using Alcohol Catalytic Chemical Vapor Deposition. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azman , Mahmood (2007) Rekabentuk Struktur Mekanikal Mesin Pengikis Untuk Nata De Coco. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azman Syafiq , Yusof (2013) Development Of A Pick And Place Table Top Sized Robot Cell. Project Report. UTeM, Melaka. (Submitted)

Mohd Azmel, Aziz (2008) Joining Performance Of Aluminum T6063 Using GMAW Welding. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Azmer, Abu Bakar (2010) Intruder Alert Via Short Message Service (SMS) For Premises. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azmi, Siti Haidar Atiah (2017) Optimisation And Analysation Of Linear Positioning Table For Drilling Machine. Project Report. UTeM, Melaka. (Submitted)

Mohd Azmi , Hussain (2009) The Development Of Interface And Simulation For Industrial Cascade Level System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azmi , Ismail (2008) Small Signal Model Of The Cockcroft-Walton Voltage Multiplier. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azmil , Ariffin (2008) Assessment Of Working Posture At Different Workstation Design For Socket Adapter Assembly Using RULA Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azrayie, Zainodin (2012) Fuzzy Logic In Position Control System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azri, Abu Bakar (2012) Analyzing Induction Motor Variables (Voltage, Torque & Efficiency) To Compare Between Nelder-Mead Method And Powell's Method Of Optimization. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azri, Abdul Aziz (2008) Pengingat Masa Perubatan Digital. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azrie, Ismail (2015) Wireless Announcement Board At Schools And Colleges. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azril , Mohd Azli (2011) Potential Of Carbon Black Electrostatic Filler For The Automotive Paint Coating Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azril Aliff , Jusoh (2009) Online Face Recognition. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Azrin, Ismail (2008) Merekabentuk Pengawal PID Untuk Mengawal Kedudukan Motor Dengan Menggunakan Sistem Pakej Simulasi. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azrol Hairomy , Mohd Nordin (2009) Eksperimen Analisis Ragaman Terhadap Kereta Penumpang Kompak Yang Menggunakan Tangki NGV. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Azrul, Omar (2009) Feasibility Study And Conceptual Design On The Automatic Fish Freeder. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azrul , Abdul Talib (2009) Design Of Daylight Intensity Detecor For Power System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azrul Hisham , Abdul Kadir (2007) Analysis Of Surface Integrity Of Honeycombed Aero Composite Material In Drilling With HSS Cutting Tool. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azuwan, Md Janis (2010) An Analysis Of Micro-Hole EDM Machining On Ti-6A1-4V. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azwan, Che Othman (2015) Examining OSHA Performance And Practices In Electronic Industry: A Case Study At Rhom Wako Electronic Sdn Bhd. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azwan, Mokhtar (2010) Automatic Pet Feeder Using PIC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azwan , Arbaii (2007) Rekabentuk Dan Analisis Lengan Kawalan Sistem Gantungan Kereta Lumba Formula Universiti. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azwan , Adnan (2008) Fence Intruder Detection System (FIDS). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azwann, Zulkefle (2012) Design And Implementation Of A Low Cost Portable And Compact 2.4 GHz Spectrum Analyzer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Badari, Muhammad Khairul Ikhwan (2018) Analysis Of The Bending Effect Of Single Mode Fiber (SMF) Structure Towards The Performance Of Multimode-Single Mode-Multimode (MSM) Fibre Optic Sensor For Liquid Concentration Measurement. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Badli , Ramli (2009) Redesign Of Nail Clipper Through BD Design For Assembly Methodology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Badrun, Yusof (2013) Development Of Remotely Operated Underwater Vehicle Maneuvers Control System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Bakri , Ismail (2013) Regenerate of decanter cake from palm oil mill waste effluent for the removal of heavy metal ions from industrial wastewater. Project Report. UTeM, Melaka. (Submitted)

Mohd Basahahruddin, Azny (2017) Effect Of Carbon Nanotube On The Properties Of Graphite-Carbon Black-Epoxy Composite For Bipolar Plate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Basar, Jamaludin (2017) Thermal Performance Of Kenaf Composite By IES Simulation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Basir, Mohamad Faris (2017) Determination Of Dimensional Accuracy Of A Part By Silicone Rubber Mold Using Taguchi Method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Basir, Nur Hazirah (2017) Study On Design For Manufacturing Of Benchmarking Design Using Fused Deposition Modeling An Entry Level 3D Printer. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Bazli, Hairrizaman (2010) Mobile Chatting Via Bluetooth. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Dzahir, Abdul Halim (2015) Cutting Technology And Sintering Jig Development For Manufacturing Of Hollow Structure Mat. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Dzakiudin , Saripudin (2010) Improving Of Cool Air Evacuation Process For Home Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Dzuhairy , Hussain (2006) Kajian Sifat Sambungan Bahan Logam Melalui Proses Kimpalan. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Mohd Dzul Fahmi, Mohd Zawawi (2007) Development Of RFID Database Handling System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Effendi , Husin (2008) Design And Timing Analysis Of Variable Valve Timing (VVT) For Internal Combustion Engine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ehsan, Azam (2009) PI Algorithm For A Speed Control Of DC Motor With Tachometer Feedback. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ekhwan , Rahim (2009) Study On Contribution And Effect Analysis Of Coolant On Roundness In Cylindrical Grinding. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Elfie Qasfie , Md Buang (2010) Analisis Penatahan Dan Diskriminasi Geganti Jarak Pada Talian Penghantaran Menggunakan Perisian Cape. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Ermin Alif, Norsani (2013) Human Motion Detection. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Eshra Helmy , Abdul Rahim (2007) A Real Time Barcode Reader For Laboratory Attendance (Hardware). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ezuwan, Kassim (2008) Designing And Analyzing Preliminary Parts Of An Aerostat. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ezwan, Md Said (2008) Network Analysis And Design At Wisma Negeri. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fadhillah , Mohamad (2006) Design A Strain Demonstration Unit. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fadhlan, Zahari (2008) Aerodynamic Investigation Of A Commercial Vehicle Using CFD. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fadir, Mat Sidi (2005) Object Recognition And Sorting Using Pneumatic Manipulator And PLC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fadli , Ismail (2009) An Experimental Study Of The Effect Of The RPM To Surface Roughness In Milling. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fadzil, Nordin (2005) The Effects Of Heat Treatment On Mild Steel And Its Industrial Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fadzil, Nordin (2005) The Effects Of Heat Treatment On Mild Steel And Its Industrial Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fadzil, Hashim (2005) Modelling Compact Heat Exchanger Surface. Project Report. UTeM, Melaka. (Submitted)

Mohd Fadzil, Md Arap (2007) Flood Alert System via SMS (FASvSMA). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fadzil, Mohd Amir Anuary (2017) Redesign Workstation By Using Malaysian Anthropometry Data In Aerospace Manufacturing By Using Delmia V6. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Fadzil, Muhamad Shafarin (2016) Incorporating Flywheel Hybrid Module In Automobile : An Embodiment Design Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fadzil, Syahirah (2017) Design Of Modular Smart Pick & Place Automation System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fadzili, Abdul Hamid (2010) Design Of Permanent Magnet Synchronous Motor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fadzlee, Azmi (2009) PC Based Of Motorized Ball Valve Position. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fadzli, Abdollah and Rafidah, Hasan (2008) A Study On The Re-solution Heat Treatment Of An Aluminum Alloy (Kajian Ke Atas Rawatan Haba Semula Aloi Aluminum). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fadzli, Talib (2013) Design And Analysis Of Production Tooling Using Computational Fluid Dynamic. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fadzli, Mustapha (2007) Investigation Of Mechanical Properties Of Parts Produced Using 3D Printing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fadzli , Haridan (2010) FTMK Class Alert Notification (FTMK CAN). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fadzly Wahid, Mohd Ishak (2005) Artificial Intelligence Climbing Robot (AICR). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Faeiz, M.Nawawi (2011) Design Improvement Of Power Tool For Safely And Quickly Cutting And Bevelling Pipes. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Faez, Saharudin (2009) A Study On Impact Response Of Advanced Laminate Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fahame, Che Daud (2013) Influence Of Cutting Condition On Product Quality When Cutting Aluminum Alloys. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fahmi, Ahmad (2010) Eliminating Waste : Enhancement Of Productivity Of Manufacturing Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fahmi, Awang (2008) The Development Of A Mobile Multimedia Log Book. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fahmi, Che Ab Aziz (2008) Generation And HVDC Test On Isulator (Vulcanized Rubber). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fahmi, Hamid (2009) Design And Develop A Harmonic Filter For Magnetic Ballast Fluorescent Lamp. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fahmi, Idrus (2009) Solar Peak Power Tracker. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fahmi, Abd Majid (2010) Development Of A Mini Turbine To Generate Electricity. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fahmi, Abdullah Sani (2009) Effect Of Heat Treatment Process Of Stainless Steel For Watch Manufacturing Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fahmi, Baharuddin (2008) Design Development Of A Pallet Stacker Through Integration Of Ergonomic Assessment And Quality Function Deployment (QFD) At Machine Shop In UTeM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fahmi, Taher (2015) Design And Development Of Autonomous Sweeper Robot For Badminton Court. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fahmi , Deraman (2006) Pembangunan Industri Kecil Atau Sederhana Dalam Mengitar Semula Bahan Buangan Kepada Produk Pengguna Atau Produk Kejuruteraan Yang Baru. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fahmi , Shafie (2008) Flexural Strenght And Analysis Of Mullite Bonded Silicon Carbide Sintered At Various Heating Period. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fahmir Adzran, Ramlee (2014) Development Of Pesona Risc Microprocessor Architecture In FPGA. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fahril, Mokhy (2006) Membangunkan Perisian Beban Haba Penyejukan (HVAC) Bagi Sesebuah Rekabentuk Bangunan Dengan Menggunakan Perisian Sesuai. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Faidzal , Salkah (2008) Oil Palm Seed Transporter : Structure Analysis & Improvement. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Faiezul, Johari (2009) A Comparison Study Of Standard Test Method For The Determination Of Flexural Property Of Glass Fiber Polyester Laminates. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fairid, Baharim (2008) Kesan Sirip Ke Atas Tempoh Pendidihan Air Di Dalam Cerek Biasa. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fairous , Idris (2008) Multipurpose Motor Drive System For Small Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fairus , Abdollah and Syed Najib , Syed Salim and Hairol Nizam, Mohd Shah and Irma Wani , Jamaludin (2011) Development Of An Automated Self-Parking System (ASPS) For An Automated Guided Vehicle (AGV) Via Intelligent Control Algorithms. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fairuz, Mohd Rashid (2006) Design, Simulation And Analysis The Pressure Limiting Valve For Automobile Tubes Or Tubeless Tyre. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fairuz, Shahadan (2009) Investigating The Force Imposed In Polishing Process For Comau Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fairuz, Hamzah (2007) Wireless Ad-Hoc Routing System (WARS). Project Report. UTeM, Melaka. (Submitted)

Mohd Fairuz, Masrom (2009) Design Water Tank Level Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fairuz , Che Abdul Wahab (2006) Solarbot. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Mohd Fairuz , Roslan (2007) Merekabentuk Dan Membangunkan Tangki LPG Dilengkapi Dengan Alat Pemanas Untuk Kenderaan. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Mohd Fairuz , Suliman (2006) Product Development Using QFD Methodology-A Case Study Of Car Wipe. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Mohd Fairuz Nizam , Ibrahim (2007) The Development Of Modular Product Design : Foldable Chair. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fais, Ismail (2010) Tuning Single Cylinder Two - Stroke Engine Or Performance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Faisal, Harun (2012) A Study Of Fin In Arrays As A Heat Sink Of Motorcycle Thermoelectric Power Generator (MTEG). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Faiz, Abd Rahim (2007) Design, Development, And Fabrication Of Tyre Lug Wrench. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Faiz, Mat Zaid (2010) Aerodynamic Study Of Formula 1 In School For Mozac Racing Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Faiz, Mohd Mokhtar (2011) Design Of A Noise Enclosure For Portable Generator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Faiz, Hat (2015) Development Of Hand Gesture Robot Using Xbee Communication. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Faiz, Kamarudin (2009) Power Over Ethernet. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Faiz , Hassan (2007) Speed Control Of CESB Conveyer Belt With PLC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Faiz , Safee (2010) Design And Development An Underwater Glider Using PIC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Faiz , Hamizan (2009) Kajian Terhadap Rekabentuk Injap Solenoid Bagi Sistem Gas Petroleum Cecair. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Faizal, Ghazali (2012) Application Palm Kernel Shell Charcoal In Steel Carburizing Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Faizal, Halim (2008) Study The Failure Phenomenon On Proton Waja's Door Handle And Redesign The Model To Reduce Failure. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Faizal , Abd Razak (2006) Network Analysis And Security Assessment - A Case Study In Cubic (KUTKM). Project Report. Melaka, Malaysia, UTeM. (Submitted)

Mohd Faizal , Basarudin (2007) Penggerak Bendera Dengan Kawalan Jauh ('Flag Raising Remote Control'). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Faizal , Mohd Pauzi (2013) Tailored Orbital Welding Of Dissimilar Stainless Steels Material. Project Report. UTeM, Melaka. (Submitted)

Mohd Faizal , Muhammad Zaini (2010) Remote Control Doorlock System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Faizal , Razali (2007) Real Time Clock Using PIC Micro. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Faizal , Abu Bakar (2009) Development Of 3-Axis Routing Machine Control System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Faizal , Mohamad (2010) Surface Finish Study Of Mild Steel Machined By Carbide Cutting Tools. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Faizi, Abd Halim (2008) Design Of Low Cost 3 Digit Digital Tachometer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Faizuddin, Mohamed (2011) Merekabentuk Rasuk Untuk Menganalisis Sifat Ketegangan Tekanan Dengan Menggunakan Tolok Terikan Untuk Rasuk Berlainan Bahan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Faizul , Rozali (2007) Prismatic Lifter Robot By Using Programmable Logic Control (PLC). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Faizul Shazrin , Shukor (2007) The Hopping Robot With One Leg. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fakhruddin, Abdullah (2013) Corrosion Failure Analysis Of Weldment Area At Internal Surface Of Carbon Steel Pipe Used In Oil And Gas Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fakrol Radzi, Saipi (2012) Design And Develop Of Smart Traffic Light System For Emergency Vehicles. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fakzan Akhmar , Omar (2007) Electronic Mechanical Design System (E-Mech Sys) For Consultancy Services Fire Fighting Approach. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Mohd Faqruddin, Che Ishak (2008) An Interactive Learning On Load Flow Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Faqrul Lazzi, Zarin (2012) Study Of Dc Bus Instability With Constant Power Load. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Faqrul Radzi, Tahiruddin (2008) Merekabentuk 'Diffusion Silencer' Untuk Mengurangkan Kebisingan Enjin 2 Lejang. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Faqrul Redza , Tahiruddin (2010) The Effect Of High Voltage Stress On Different Type Of Oil. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fareez, Mohd Afif (2013) Smart Parking System Using Wireless Connectivity. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fareez , Abdul Rahman (2013) Merekabentuk Dan Membangunkan Sistem Pembersihan Kendiri Bagi Peralatan Penuaian Air Hujan. Project Report. UTeM, Melaka. (Submitted)

Mohd Fareez Ibnor, Ibrahim (2011) Design And Analysis Of A Lightweight Clutch Disc For A Mini Farming Tractor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fareez Nazari, Ahmad Zahrollail (2010) Design Of Power Amplifier For Wimax Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Farhaan, Kamaruzaman (2015) Development Of Flat Bar Gauge Using Total Design Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Farhan, Alias (2008) Study On Chassis Vibration Induce By Power Train And Engine Operation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Farhan Han, Syaza Najwa (2017) Fatigue Analysis On Bonding Of Aluminium And Carbon Laminate Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Farid, Ghazali (2010) Design And Analysis Of Modular Fixture Of PCB Routing Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Farid, Mizan (2008) PC Based Robotic Arm. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Farid, Othman (2009) Pembangunan Bahan Bangunan Penjimatan Tenaga. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Farid , Abu Bakar (2007) Data Logger For Vertical Tube Furnace. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Faridh , Samian (2010) Design Of Two Seated Three Wheel Vehicle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Faridzan, Azizan (2008) Programmable Water Jet Show In Aquarium Controlled By PLC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fariq, Mohamad (2010) W-Shape Beam Subject To Quasi-Static Loading. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Faris, Mohd Nasirruddin (2010) Prototype Of Fire Fighter Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fariz, Sabtu (2009) Application Of Design For Environment In Product Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fariz Naim, Abdul Talib (2012) Basikal Elektrik Boleh Lipat Menggunakan Hab Motor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Farmezee, Abdullah (2008) Membuat Dan Menguji Unit Kawalan Suhu. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Farred Akma , Awang (2007) Robot Humanoid CS-8 (Pengolah Bahagian 1). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Farris , Mohd Daud (2012) Reka Bentuk Dan Pembangunan Galah Teleskopik Pneumatic Bagi Penuaian Buah Kelapa Sawit Dengan Pemampat Udara Mudah Alih Dan Tiga Segmen Paip Aluminium Berlubang (Gred Marin). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Farriz, Md Basar and Khalil Azha, Mohd Annuar and Madiha, Zahari and Muhamad Faizal, Yaakub and Mohd Firdaus, Mohd Ab Halim (2011) A New Source Of Renewable Energy From Lightning Return Stroke: A Small Scale System. Project Report. UTeM. (Submitted)

Mohd Fasihin, Abd Satar (2010) Investigation Of Damage Process Due To Fatigue On Heat Treated Aluminum 7075 With Effect Of Corrosion. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fathdzil , Mustapha Ali (2007) Network Based Home Surveillance System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fathi Nadwi , Mohd Fauzi (2007) Pengecas Solar Untuk Telefon Bimbit. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fauzi, Ab Aziz (2012) Diagnosing Rolling Element Bearing Failure Using Vibration Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fauzi, Ab Rahman (2009) Kajian Pembahagian Aliran Tenaga Untuk Penggunaan Tenaga Cekap. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fauzi, Abdul Aziz (2010) PIC Trainer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fauzi, Mohamad Firdaus (2017) To Study The Concept Of Perpetual Motion On Table Fan By Using Permanent Magnet. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Fauzi , Ab Rahman (2011) 3D Visualization Of Wireless Cognitive Network Coverage Using High Performance Computing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fauzi , Nor Shah (2009) Braille To Roman Text Converter Using PIC Microcontroller. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Fauzy, Khamis (2010) Study A Pneumatic Telescopic Cylinder Arm Operation For Variable Load Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Faza Fauzan , Mohd Alias (2008) Ergonomic Evaluation Of Manual Load Lifting In Metal Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fazi, Muhammad Zuhdi (2016) Development Of An Automated Helmet Washer Using Arduino. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fazlan, Ali (2013) Battery Management System For Solar Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fazli, Manaf (2008) Merekabentuk Dan Melaksanakan Sistem Kawalan Paras Air. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fazli, Razali (2007) Development Of An Automated Door Locked (Smart Keyless Entry). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fazli , Mohd Sam and Md Nor Hayati, Tahir (2011) Usage Of ICT Application Information Sharing At Different Level Of Product Development Processes In The Malaysian Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fazrin, Mohd Fauzi (2009) PC Based Protection Scheme. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fazrin , Razali (2009) Investigation On The Effects Of Rake Angle Variations On The End Mill Wear, Cutting Forces And Surface Finish. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fazruf , Mohd Afandi (2005) Simulation Of Three-Phase Harmonics Filter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fazry , Abdul Aziz (2007) Pembangunan Sistem Hidraulik Air Bertekanan Rendah Menggunakan Pam Empar. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Mohd Fekri , Ab Halim (2009) Solving Tracking And Regulation Of A Mobile Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ferdaus , Mustafa (2006) Implementation And Analyzing Network Services Through Virtual Server Environment. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Mohd Fidaus , Mohd Bahamam (2009) Design Of Security Access Door System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fidha Uddin , Alias (2013) Boxy Aircraft Component CNC Lathe Machining- Haas. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fidzrin, Mohd Hamizaz (2014) Vehicle Brake Light Detection Using Hybrid Color Model. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fijam , Abdul Halim (2010) Mobile Balancing Robot With Two Wheels. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Firdaus, Jamaludin (2013) Prediction of helical gear life using wear debris analysis. Project Report. UTeM, Melaka. (Submitted)

Mohd Firdaus, Abd Ghani (2006) Water Level Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Firdaus, Abd Rahim (2008) Mereka Bentuk Sebuah Pam Lumpur Anti Sumbat. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Firdaus, Aluwe (2007) Two Robots Pushing A Beam (Movement And Communication). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Firdaus, Basir (2009) Static Voltage Stability In Electrical Power system. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Firdaus, Handy (2011) Material Selection Of Cars Tire Based On Design For Sustainability Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Firdaus, Ibrahim (2010) Design Rules For Casting Process Using CAD Tool. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Firdaus, Rusli (2008) Development Of Servo Motor Pick And Place Robot With PIC16F877A Microcontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Firdaus, Ab Rashid (2010) Design And Development Of Manual Robot Using Mecanum Wheels. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Firdaus, Ab Wahab (2007) Video Surveillance System. Project Report. UTeM, Melaka. (Submitted)

Mohd Firdaus, Abd Rahman (2010) Laser Audio Communication System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Firdaus, Juhari (2015) Optimization Of The UTeM FV Malaysia Race Car Suspension System Design To Reduce Rolling Effect. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Firdaus, Mohd Hussain (2008) The Development Of An Active Roll Control For Heavy Vehicle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Firdaus, Mohd Noor (2009) Comparatives Study On IDMT Overcurrent And Earth Fault Relay : Micro MK2000 And ABB SPAJ 140c. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Firdaus, Mohd Nordin (2010) Development Of Simple Wind Turbine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Firdaus, Ramli (2010) Rapid Prototyping On Biomanufacturing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Firdaus, Roslan (2009) Ultrasonic Parking Range Meter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Firdaus, Rusli (2008) Development Of Servo Motor Pick And Place Robot With PI16F877A Microcontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Firdaus, Samsudin (2016) Experimental study of sheer strength of sheet metals. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Firdaus, Zamri (2009) Design And Development Of Hybrid Composite Chassis For Formula Student Race Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Firdaus , Hashim (2007) Design And Build New Cold Press Mini Machine By Using PLC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Firdaus , Ibrahim (2010) Design Rules For Casting Process Using CAD Tool. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Firdaus , Jaafar (2010) Automotive Air Conditioner Booster. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Firdaus , Jahar (2009) Design And Simulation Of Adaptive Cruise Control Using Matlab/Simulink. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Firdaus , Mansor (2007) Kawalan Motor Sesentuh. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Firdaus , Md Yasin (2006) Bluetooth Remote Controller For Virtual Devices. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Firdaus , Mohd Noor (2006) Penyelidikan Tentang Kelakuan Elektrokimia Bagi Keluli Lembut Di Dalam Persekitaran Akueus. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Firdaus , Mustaffa (2009) Statistical Analysis For Front End RF Reciever Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Firdaus , Ab Razak (2009) A Study Of Aerodynamics For F1 In Schools. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Firdaus , Abu Bakar (2010) Design And Development Of Ventilated Single Disc Brake Rotor For UTeM Formula Style Race Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Firdaus , Rameli (2007) Unit Pacuan Hidraulik Boleh Ubah Kelajuan. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Mohd Firdaus , Ramli (2010) Rapid Prototyping On Biomanufacturing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Firdauz, Hasan (2010) Wireless Smoke Detector Using Microcontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fisol, Jusoh (2006) Design And Analysis Multi Purpose Vehicle (MPV) Chassis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fitri, Mustapha (2015) Determination Of Defect And Mechanical Properties For Tungsten Inert Gas (TIG) Welded Carbon Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fitri , Jamaludin (2009) Assessment Of Wire EDM Parameters On Stainless Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fozi, Airini An Nadrah (2017) Automated Guided Vehicle (AGV) System Based On Simultaneous Localization And Mapping (SLAM). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fozi, Nur Aliaa Fazlin (2017) Development Of Automatic Water Replacement Aquarium With Fish Feeder Using Arduino. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Fuad, Abd Wahab (2009) Mesin Pembakar Roti Automatik (Automatic Toaster Machine). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fuad, Mohammad Nur Taufiq (2016) Investigation Of Wear Mechanism On The Ball Bearing Tested By Nano-Oil Using Extreme Pressure Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fuhadi, Mohd Nor (2006) Dynamic Forces & Stress Resultant In A Connecting Rod. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ghaffar, Ghazi (2009) Automatic Power Factor For Residential. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ghazali, Adam Syafiq (2018) Regenerative Braking Effects On Isothermal And Adiabatic Energy Storage Of Hydro-Pneumatic Driveline. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hadar, Jaafar (2009) Development Of Distributed Control System Using Servo Driven Position Control Plant. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hadyan, Wardhana (2010) Wreck' Em Down (Mobile Game Application). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafeez, Awang Hamat (2009) Modal Analysis On Flexible Plate Structure Using Finite Element Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafeez , Nazri (2007) Pick And Place Robotic Arm With Training Kit (Software). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Haffizzi , Md Idris (2007) Design A Casing For Air Pressure Plug Rapid Prototype. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafidz, Zakaria (2009) The Development Of Composite Bodywork Of Nose Cone Panel For Formula Varsity Race Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafieni , Md Yakim (2009) Design Of Water Level Activated Alarm System For House Water Tank. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafiez, Ismail (2008) Design Of PI, PID, PD Controller For DC Motor Speed Controls Using Analog Circuitry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafifi , Muhammad Hanafiah (2008) A Controller Design For An Expansion Valve. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafiq Iquan , Mohd Yusoff (2007) An Improvement Of Drinking Water Container Design Focusing On Structural Aspect. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafis, Hassan (2010) PIC Based Anti-Tie Down Module. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafis , Mohd Anuar (2005) Modeling Linear 6/4 Switched Reluctance Motor Using Matlab Simulink. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafis , Bajuri (2008) Analyze The Performance Between Pure Oil-Based Coolant And Combination Of Oil-Based Coolant With Palm Oil On Cutting Surface In Milling Operation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafiszuddin, Mohd Puaad (2009) Development Of Workholding Device For Loaded PCB Cutting Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafiszudin , Ahmad (2013) Design And Fabrication Of Ball Feeder Mechanism And Body For Tennis Ball Machine. Project Report. UTeM, Melaka. (Submitted)

Mohd Hafiz, Abdul Manan (2008) Intelligent Line Follower Robot Using LDR Sensor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafiz, Abdul Rahman (2005) Investigating The Performance Of Traveling For XY Table. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafiz, Mohd Yaziz (2011) Simulation Of Front Impact On A Car Bumper. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafiz, Muhammad (2006) Lead Free Solder Technique For Automotive Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafiz, Muhammad Som (2012) Wireless Housing Security System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafiz, Sulaiman (2009) Controller Realization Of An Industrial Cascade Level System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafiz, Sulaiman (2013) Design Of Shallow Source / Drain Extension (SDE) Profiles In Improving Short Channel Effect (SCES) In Nanoscale Devices. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafiz, Ismail (2009) An Experiment Study Of The Effect Of Cutting Speed, Depth Or Cut And Feed Rate To Roundness In CNC Lathe. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafiz, Mohamed Hassan (2011) An Improvement To Reduce Misdetection Of Arc And Spatter In Welding Process By Image Processing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafiz, Yaacob (2015) Ultilizing Bamboo As A Non-Fibrous Sound Absorber. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafiz , Abdul Rahman (2005) Appropriate Selection Of A Tower For 275kv Transmission Line. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafiz , Hamzah (2008) Penyediaan Bahan Piezo Seramik Melalui Gabungan Sol-Gel Dan Pemprosesan Seramik Secara Konvensional. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafiz , Mohamad Kassim (2013) Bangunan penyejuk solar pasif. Project Report. UTeM, Melaka. (Submitted)

Mohd Hafiz , Mohammad Noor (2009) Quality Improvement By Using Taguchi Method In Disk Manufacturing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafiz , Mohd Nordin (2011) Analysis & Measurement Of Service Continuity Enhancement By Using Automatic Protection System (APS) In Fiber Optic Communication Link. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafiz , Mohd Zailan (2007) Design Of Electrical Hardware And Controller For Nata De Coco Scrapping Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafiz , Rauzan (2006) Robot Beroda 3 Dengan Kawalan PIC16F84 Dan Pengesan Infra Merah. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafiz , Taib (2010) Mobile Robot With Floor Measuring Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafiz , Zainuddin (2007) Computer Aided Education On Special Transformer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafiz , Zakaria and Mohammad Radzi, Motsidi and Muhamad Syahrul Azhar, Sani and Mohd Faizal, Abdollah and Ahmad Naim , Che Pee (2005) Real Time Audio Streaming Over Campus Intranet. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafiz , Abd. Rahman (2008) Utilization Of Oil Palm Shell Powder (OPSP) As Filler In Acrylonitrile-Butadiene-Stryrene (ABS) Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafiz , Mohd Ismail (2010) Improvement Of Medical Product Through Design For Environment (DfE) Methodology : A Case Study Dialyzer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafiz Fahmi, Abdol Sukor (2015) Study On The Effect Of EDM Die Sinking Parameters On The Surface Finish Of Mild Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafizal, Hanafi (2005) Monitoring Temperature Sensor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafizan , Che Halim (2007) Design Of Step Impedance Hairpin Resonator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafizi, Abdul Rahman (2009) Design And Development Of Composite Suspension Push Rod For Formula Student Race Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafizi, Ab Rahim (2012) Design And Development of Current Mode AC DC Switching Power Supply. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafizi, Kamarudin (2006) Internet Surfing : Online Activity Audit Tool. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafizoul, Omar (2008) Intelligent Control Of Magnetic Bearing System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafizoul , Omar (2008) Intelligent Control Of Magnetic Bearing System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafizuddin, Samsudin (2012) Simulation Of Power Transmission Line Electric And Magnetic Field Exposure. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafizul , Mohamed (2007)