Influence On Thrust Force And Delamination For One Shot Drilling Of Carbon Fibre Reinforced Plastic (CFRP)

Salleh, Mohd Shukor and Jaafar, Mohd Fairuz and Raja Abdullah, Raja Izamshah and Hassan, Muhammad Hafiz and Sundi, Syahrul Azwan and Mohd Shahrim, Mohammad Shah All Hafiz and Kasim, Mohd Shahir (2019) Influence On Thrust Force And Delamination For One Shot Drilling Of Carbon Fibre Reinforced Plastic (CFRP). International Journal Of Mechanical And Mechatronics Engineering, 19 (1). pp. 43-56. ISSN 2227-2771

Text Influence on thrust force and delamination for one shot drilling of Carbon Fibre Reinforced Plastic (CFRP).pdf - Published Version Download (1MB)

Abstract

The requirement of drilling process of Carbon Fibre Reinforced Plastic (CFRP) is vital in order to fulfil final assembly specifications. Despite the excellent mechanical properties of composites, they are hard to be machined due to its toughness. The damages such as peel-up and push-out delamination usually occur during its machining. To provide drilling induced delamination is a priority to reduce parts rejection and lead to waste in time and money. In this work, a comparative study of three geometries under different cutting conditions is presented. Application Taguchi’s design of experiments for this experimental works increase the analysis reliability. Various penetration angle drilling also studied to determine the effect of thrust force and delamination. Thrust force was monitored during drilling tests, and delamination extension was quantified using image processing software. Results are processed using analysis of variance (ANOVA) then further presented by response surface graph showed that the best drill geometry, spindle speed and feed rate selection is fundamental to reduce delamination. The result obtained from the analysis shown delamination both for peel-up and push-out spread worse with increasing of drilling angle. Delamination factors are directly proportional with thrust force generated during drilling and increasing of thrust force will worsening the delamination damages. Straight flute drill is the best drill that generates lower thrust force thus reducing delamination effect compared with twist and dagger drill which on optimum feed rate and spindle speed parameter is 0.05 mm/rev and 4000 rpm, respectively.

Item Type:	Article
Uncontrolled Keywords:	CFRP, one-shot drilling, delamination, thrust force, One Shot Drilling, Carbon Fibre Reinforced Plastic
Subjects:	T Technology > T Technology (General) T Technology > TJ Mechanical engineering and machinery
Divisions:	Faculty of Manufacturing Engineering
Depositing User:	Mohd Hannif Jamaludin
Date Deposited:	28 Jul 2020 10:40
Last Modified:	28 Jul 2020 10:40
URI:	http://eprints.utem.edu.my/id/eprint/24105
Statistic Details:	View Download Statistic

Actions (login required)

View Item