Items where Author is "Abdullah, Muhammad Ilman Hakimi Chua"

Lubis, Abdul Munir Hidayat Syah and Abdullah, Muhammad Ilman Hakimi Chua and Puspitasari, Poppy and Permanasari, Avita Ayu and Pramono, Diki Dwi (2024) Taguchi and morphological analysis on the lubricated friction and wear of titanium alloy Ti10V2Fe3Al under CNT nano-lubricant. Jurnal Tribologi, 40. pp. 120-138. ISSN 2289-7232

Md Ali, Mohd Amran and Mohd Ali, Noorfa Idayu and Salleh, Mohd Shukor and Abdullah, Muhammad Ilman Hakimi Chua and Subramonian, Sivarao and Yamaguchi, Masayuki (2023) Optimization of compression moulding parameters on mechanical properties of stainless steel 316L. Journal of Advanced Manufacturing Technology (JAMT), 17 (1). pp. 47-58. ISSN 1985-3157

Mubarok, Sukri and Puspitasari, Poppy and Andoko, Andoko and Lubis, Abdul Munir Hidayat Syah and Permanasari, Avita Ayu and Abdullah, Muhammad Ilman Hakimi Chua (2023) Failure mechanism on Ti-6Al-4V material processed using Selective Laser Melting (SLM). In: 5th International Conference on Advances in Manufacturing and Materials Engineering, ICAMME 2022, 9 August 2022 through 10 August 2022, Kuala Lumpur.

Puspitasari, Poppy and Pramono, Diki Dwi and Putra, Chandra Setiawan and Permanasari, Avita Ayu and Hidayat Syah Lubis, Abdul Munir and Abdullah, Muhammad Ilman Hakimi Chua (2023) Optimization of performance carbon-based nanolubricant on Ti6Al4V Pin on disc testing using taguchi method. In: 8th International Conference on Electrical, Electronics and Information Engineering, ICEEIE 2023, 28 September 2023 through 29 September 2023, Malang City.

Puspitasari, Poppy and Wardana, Muhammad Raffli Putra and Pramono, Diki Dwi and Lubis, Abdul Munir and Permanasari, Avita Ayu and Abdullah, Muhammad Ilman Hakimi Chua and Risdanareni, Puput (2023) Tribology properties of titanium alloy (Ti-6Al-4V) at various temperature on α/β solution treatment and aging condition. In: 5th International Conference on Advances in Manufacturing and Materials Engineering, ICAMME 2022, 9 August 2022 through 10 August 2022, Kuala Lumpur.

Abdullah, Muhammad Ilman Hakimi Chua and Omar, Mohammad Rafi and Alkahari, Mohd Rizal and Abdullah, Rohana and Abdollah, Mohd Fadzli bin and Subramaniam, Mahananthan and Ibramsa, Rizwana Seeni (2022) Effect of polyamide-12 material compositions on mechanical properties and surface morphology of SLS 3D printed part. Journal of Mechanical Engineering, 19 (1). pp. 57-70. ISSN 1823-5514

Abdullah, Muhammad Ilman Hakimi Chua and Abdollah, Mohd Fadzli and Tamaldin, Noreffendy and Amiruddin, Hilmi and Ramli, Faiz Redza and Mohamad Norani, Mohamad Nordin (2021) Mechanical And Tribological Properties Of FFF 3D-Printed Polymers: A Brief Review. Jurnal Tribologi, 29. pp. 11-30. ISSN 2289-7232

Abdullah, Muhammad Ilman Hakimi Chua and Mohamad Norani, Mohamad Nordin and Abdollah, Mohd Fadzli bin and Amiruddin, Hilmi and Ramli, Faiz Redza and Tamaldin, Noreffendy (2020) Tribological Analysis Of A 3D-Printed Internal Triangular Flip ABS Pin During Running-In Stage. Jurnal Tribologi, 27. pp. 42-56. ISSN 2289-7232

Mohamad Norani, Mohamad Nordin and Abdollah, Mohd Fadzli and Abdullah, Muhammad Ilman Hakimi Chua and Amiruddin, Hilmi and Ramli, Faiz Redza and Tamaldin, Noreffendy (2020) Correlation Of Tribo-Mechanical Properties Of Internal Geometry Structures Of Fused Filament Fabrication 3D-Printed Acrylonitrile Butadiene Styrene. Industrial Lubrication and Tribology, 72 (10). pp. 1259-1265. ISSN 0036-8792

Abdollah, Mohd Fadzli bin and Amiruddin, Hilmi and Ramli, Faiz Redza and Tamaldin, Noreffendy and Mohamad Norani, Mohamad Nordin and Abdullah, Muhammad Ilman Hakimi Chua (2020) Synergistic Effect Of Loads And Speeds On The Dry Sliding Behaviour Of Fused Filament Fabrication 3D-Printed Acrylonitrile Butadiene Styrene Pins With Different Internal Geometries. International Journal of Advanced Manufacturing Technology, 108. pp. 2525-2539. ISSN 0268-3768

Abdollah, Mohd Fadzli and Amiruddin, Hilmi and Ramli, Faiz Redza and Tamaldin, Noreffendy and Mohamad Norani, Mohamad Nordin and Abdullah, Muhammad Ilman Hakimi Chua (2020) 3D Printing Parameters Of Acrylonitrile Butadiene Styrene Polymer For Friction And Wear Analysis Using Response Surface Methodology. Proceedings Of The Institution Of Mechanical Engineers, Part J: Journal Of Engineering Tribology, 235 (2). pp. 468-477. ISSN 1350-6501

Azlan, Khairul Azri and Omar, Mohammad Rafi and Hussin, Mohamed Saiful Firdaus and Abdullah, Muhammad Ilman Hakimi Chua and S. Chinniah, Eswaran (2020) Measurement Accuracy Assessment For Laser Triangulation 3D Scanning Machine. International Journal of Recent Technology and Engineering, 8 (6). pp. 2789-2793. ISSN 2277-3878

Jumaidin, Ridhwan and Abdullah, Muhammad Ilman Hakimi Chua and Jopri, Iffa Marina and Hussin, Mohamed Saiful Firdaus and Hasan, Rafidah and Saleman, Abdul Rafeq and Idral, Febrian and Aziz, Alia Ruzana (2019) Effect Of Cooling Medium And Tempering On Microstructures And Hardness Of SK3 High Carbon Steel. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 63 (2). pp. 199-209. ISSN 2289-7879

Abdullah, Muhammad Ilman Hakimi Chua and Othman, Aimanezmir and Abdullah, Rohana and Abdollah, Mohd Fadzli bin (2019) Optimization On The Nanoparticles Stability In Liquid Phased Condition By Using Taguchi Analysis. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 61 (1). pp. 129-139. ISSN 2289-7879

Muhamad Damanhuri, Amir Abdullah and Abdullah, Muhammad Ilman Hakimi Chua and Lubis, Abdul Munir Hidayat Shah and Zakaria, Muhammad Zulfattah and Hussin, Mohamed Saiful Firdaus and Kasno, Mohammad `Afif (2018) Development Of TEG Peltier Device For Heat Harvesting From 1.5 HP Split Unit Air Conditioning System. International Journal Of Applied Engineering Research, 13 (5). pp. 2390-2394. ISSN 0973-4562

Ismail, Mohd. Farid and Abdullah, Muhammad Ilman Hakimi Chua and Abu Bakar, Muhammad Fairuz and Ahmad, Azrin and Mokhtar, Mohd Sulhan and Hamzah, Luqman Hakim and Othman, Muhammad Nur and Siam, Effendy Onn (2018) Temperature Control System For Fertigation Application. [Technical Report] (Submitted)

Ab Ghani, Sharin and Noorden, Zulkarnain Ahmad and Muhamad, Nor Asiah and Zainuddin, Hidayat and Abdullah, Muhammad Ilman Hakimi Chua and Sutan Chairul, Imran (2017) Dielectric Strength Improvement Of Natural Ester Insulation Oil Via Mixed Antioxidants: Taguchi Approach. International Journal Of Electrical And Computer Engineering (IJECE), 7 (2). 650 - 658. ISSN 2088-8708

Abdullah, Muhammad Ilman Hakimi Chua and Abdollah, Mohd Fadzli bin and Amiruddin, Hilmi and tamaldin, noreffendy and Mat Nuri, Nur Rashid and Saleman, Abdul Rafeq (2017) The hBN Nanoparticles as an Effective Engine Oil Additive to Enhance the Durability and Performance of a Small Diesel Engine. Journal of Mechanical Engineering, SI 1 (1). pp. 103-112. ISSN 1823-5514

Mat Tahir, Noor Ayuma and Abdollah, Mohd Fadzli and Hasan, Rafidah and Amiruddin, Hilmi and Abdullah, Muhammad Ilman Hakimi Chua (2017) Statistical Models For Predicting Wear And Friction Coefficient Of Palm Kernel Activated Carbon-Epoxy Composite Using The ANOVA. Industrial Lubrication And Tribology, 69 (5). pp. 761-767. ISSN 0036-8792

Abdullah, Muhammad Ilman Hakimi Chua and Abdollah, Mohd Fadzli bin and Amiruddin, Hilmi and tamaldin, noreffendy and Mat Nuri, Nur Rashid (2017) Tribological effects of nano-based engine oil diluted with biodiesel fuel. International Journal of Surface and Engineering, 11 (1). pp. 12-22. ISSN 1749-785X

Abdullah, Muhammad Ilman Hakimi Chua and Abdollah, Mohd Fadzli bin and Amiruddin, Hilmi and tamaldin, noreffendy and Mat Nuri, Nur Rashid (2016) The potential of hBN nanoparticles as friction modifier and antiwear additive in engine oil. Mechanics & Industry, 17 (1). pp. 1-6. ISSN 2257-7777

Abdullah, Muhammad Ilman Hakimi Chua and Abdollah, Mohd Fadzli bin and tamaldin, noreffendy and Amiruddin, Hilmi and Mat Nuri, Nur Rashid (2016) Effect of hexagonal boron nitride nanoparticles as an additive on the extreme pressure properties of engine oil. Industrial Lubrication And Tribology, 68 (4). pp. 441-445. ISSN 0036-8792

Abdullah, Muhammad Ilman Hakimi Chua (2016) Optimization Of Boron-Based Nanolubricant For Diesel Engine. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Abdullah, Muhammad Ilman Hakimi Chua and Abdollah, Mohd Fadzli and Amiruddin, Hilmi and Tamaldin, Noreffendy and Mat Nuri, Nur Rashid (2016) The Potential Of hBN Nanoparticles As Friction Modifier And Antiwear Additive In Engine Oil. Mechanics & Industry, 17 (1). pp. 1-6. ISSN 2257-7777

Amiruddin, Hilmi and Abdollah, Mohd Fadzli bin and Idris, A.M. and Abdullah, Muhammad Ilman Hakimi Chua and tamaldin, Noreffendy (2015) Stability of nano-oil by pH control in stationary conditions. In: Mechanical Engineering Research Day 2015, 31 March 2015, Melaka.

Abdollah, Mohd Fadzli bin and Abdullah, Muhammad Ilman Hakimi Chua and Amiruddin, Hilmi and tamaldin, noreffendy and Mat Nuri, Nur Rashid (2014) The hBN Nanoparticles as an Effective Additive in Engine Oil to Enhance the Durability and Performance of a Small Diesel Engine. In: Proceedings of 41th Leeds-Lyon Symposium on Tribology 2014, 2-5 September 2014, Leeds, United Kingdom.

Abdullah, Muhammad Ilman Hakimi Chua and Abdollah, Mohd Fadzli bin and Amiruddin, Hilmi and tamaldin, noreffendy and Mat Nuri, Nur Rashid and Hassan, Masjuki and Saleman, Abdul Rafeq (2014) Improving Engine Oil Properties by Dispersion of hBN/Al2O3 Nanoparticles. Applied Mechanics and Materials. pp. 70-73. ISSN 1660-9336

Abdollah, Mohd Fadzli bin and Abdullah, Muhammad Ilman Hakimi Chua and Amiruddin, Hilmi and tamaldin, noreffendy and Mat Nuri, Nur Rashid (2014) Drive to Greener Future: Tribological and Engine Performances of Nano-Oil. In: JAST Tribology Conference, Spring 2014, 19 - 21 May 2014, Tokyo.

Abdullah, Muhammad Ilman Hakimi Chua and Abdollah, Mohd Fadzli bin and Amiruddin, Hilmi and Mat Nuri, Nur Rashid and tamaldin, noreffendy and Hassan, Masjuki and Saleman, Abdul Rafeq (2014) Effect of hBN/Al2O3 nanoparticles on engine oil properties. Energy Education Science and Technology Part A: Energy Science and Research. pp. 3261-3268. ISSN 1308-772X

Abdullah, Muhammad Ilman Hakimi Chua and Abdollah, Mohd Fadzli bin and Amiruddin, Hilmi and tamaldin, noreffendy and Mat Nuri, Nur Rashid (2014) Effect of hBN/Al2O3 Nanoparticle Additives on the Tribological Performance of Engine Oil. Jurnal Teknologi , 66 (3). pp. 1-6. ISSN 2180-3722

Abdullah, Muhammad Ilman Hakimi Chua and Abdollah, Mohd Fadzli bin and Amiruddin, Hilmi and tamaldin, noreffendy and Mat Nuri, Nur Rashid (2013) Optimization of Tribological Performance of hBN/AL2O3 Nanoparticles as Engine Oil Additives. Procedia Engineering , 68. pp. 313-319. ISSN 1877-7058

Abdullah, Muhammad Ilman Hakimi Chua and Abdollah, Mohd Fadzli bin and Amiruddin, Hilmi and Mat Nuri, Nur Rashid (2013) Optimized Nanolubricant for Friction Reduction. In: 40th Leeds-Lyon Symposium on Tribology & Tribochemistry Forum 2013, 4 - 6 September 2013, Lyon, France.