Items where Author is "Kasim, Mohd Shahir"
 | Up a level |
Article
Abd Rahman, Md Nizam and Zulkipli, Nur Hidayah and Kasim, Mohd Shahir and Jamli, Mohamad Ridzuan and Budi, Esmar (2022) Impact of Argon gas shielding flow rate on the hardness of weld joint. Journal of Advanced Manufacturing Technology (JAMT), 16 (1). 01-10. ISSN 1985-3157
Kasim, Mohd Shahir and W. Mohamad, W Noor Fatihah and Raja Abdullah, Raja Izamshah and Mohamad, Noraiham and Rosnan, Hairulhisham and Sundi @ Suandi, Syahrul Azwan and Hassan, Muhammad Hafiz and Ito, Teruaki and Mat Kasa, Zamri (2021) Analysis of carbon fiber-reinforced polymer composites delamination during vibration assisted trimming using historical data design. Malaysian Journal On Composites Science And Manufacturing, 6 (1). pp. 1-13. ISSN 2716-6945
Kasim, Mohd Shahir and Husshini, Nur Husnina Najeah and Raja Abdullah, Raja Izamshah and Mohd Shahrim, Mohammad Shah All Hafiz and Omar, Ghazali and Ganesan, Hema Nanthini and Mohd Azam, Muhamad Ammar Farhan Maula and Mohd Nawi, Mohd Al Hafiz (2021) Statistical And Simulation Analysis On Dimple Configurations Performance Of Heat Dissipation. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 86 (2). pp. 74-90. ISSN 2289-7879
Raja Abdullah, Raja Izamshah and Kasim, Mohd Shahir and Rosman, Muhammad Rafiq and Lamat, Arshad and Salleh, Mohd Shukor and Liew, Pay Jun and Abdul Aziz, Mohd Sanusi and Abdullah, R.S.A. (2021) Effects of cutter geometry and cutting parameters on machining Al/SiC Metal Matrix Composites (MMC). International Journal of Nanoelectronics and Materials, 14 (SI). pp. 343-352. ISSN 1985-5761
Raja Abdullah, Raja Izamshah and Kasim, Mohd Shahir and Lamat, Arshad and Rosman, Muhammad Rafiq and Kasman, Muhammad Zaki and Liew, Pay Jun and Abdul Aziz, Mohd Sanusi and Raja Abdullah, Raja Syamsul Azmir (2021) Quality Evaluation On Rotary Ultrasonic Assisted Drilling For Chemically Strengthened Glass. International Journal of Nanoelectronics and Materials, 14 (SI). pp. 353-362. ISSN 1985-5761
Kasim, Mohd Shahir and Husshini, Nur Husnina Najeah and Raja Abdullah, Raja Izamshah and Mohd Shahrim, Mohammad Shah All Hafiz and W. Mohamad, W Noor Fatihah and Md Ali, Mohd Amran and Abu Bakar, Mohd Hadzley (2021) Current Summary Of Surface Integrity When Machining Inconel 718 Under Different Cooling And Lubrication Strategies. Jurnal Tribologi, 29. pp. 144-155. ISSN 2289-7232
Kasim, Mohd Shahir and Raja Abdullah, Raja Izamshah and Husshini, Nur Husnina Najeah and Mohammad Shah All Hafiz, Mohd Shahrim and W. Mohamad, W Noor Fatihah and Ghani, Jaharah Abdul and Haron, Che Hassan (2021) Particulate Matter-Monitoring During End-Milling Under Different Cooling-Lubrication Strategies. Journal of Applied Science and Engineering, 24 (6). pp. 891-900. ISSN 2708-9967
Mohamad, Noraiham and Abd Latiff, Anisah and Liew, Pay Jun and Kasim, Mohd Shahir and Abd Razak, Jeefferie and Ab Maulod, Hairul Effendy and Qumrul Ahsan (2021) Morphological Characteristics And Wear Mechanism Of Recycled Carbon Fibre Prepreg Reinforced Polypropylene Composites. Malaysian Journal on CompositesScience and Manufacturing, 5 (1). pp. 1-10. ISSN 2716-6945
Kasim, Mohd Shahir and Raja Abdullah, Raja Izamshah and Mohd Hassan, Nur Alya Syaherah and W. Mohamad, W Noor Fatihah and Mohd Shahrim, Mohammad Shah All Hafiz and Mohd Nawi, Mohd Aliff (2021) The effect of an overweight backpack towards comfortability and L5S1 among primary school student. Malaysian Journal of Ergonomics, 3 (1). pp. 1-13. ISSN 2773-501X
Sundi, Syahrul Azwan and Raja Abdullah, Raja Izamshah and Kasim, Mohd Shahir and Jaafar, Mohd Fairuz and S. Ding, S. Ding (2020) Statistical Analysis On The Effect Of Machining Conditions Towards Surface Finish During Edge Trimming Of Carbon Fiber Reinforced Plastics (CFRP). International Journal of Nanoelectronics and Materials, 13 (SI). pp. 199-209. ISSN 2232-1535
Sundi, Syahrul Azwan and Raja Abdullah, Raja Izamshah and Kasim, Mohd Shahir (2020) Effect Of Machining Parameters On Surface Roughness In Edge Trimming Of Carbon Fiber Reinforced Plastics (CFRP). Tribology Online, 15 (2). pp. 53-59. ISSN 1881-2198
Mohd Abid, Mohd Asyadi 'Azam and Raja Seman, Raja Noor Amalina and Abdul Aziz, Mohd Fareezuan and Raja Abdullah, Raja Izamshah and Kasim, Mohd Shahir (2020) Electrochemical Performance Of Molybdenum Disulfide Supercapacitor Electrode In Potassium Hydroxide And Sodium Sulfate Electrolytes. International Journal of Recent Technology and Engineering, 8 (6). pp. 5499-5503. ISSN 2277-3878
Kasim, Mohd Shahir and Mohd Shahrim, Mohammad Shah All Hafiz and W. Mohamad, W Noor Fatihah and Mohd Zainurin, Nurul Shafiqah and Othman, Intan Sharhida and Raja Abdullah, Raja Izamshah and Mat Harttar, Maziati Akmal and Mohamed, S.B. and Nawi, M.A.M. (2019) The Effects Of Dry And Chilled Air On Tool Wear Behavior During Face Milling Of Inconel 718. Jurnal Tribologi, 21. pp. 47-62. ISSN 2289-7232
Kasim, Mohd Shahir and Mohd Shahrim, Mohammad Shah All Hafiz and Raja Abdullah, Raja Izamshah and W. Mohamad, W Noor Fatihah and Abdullah, Abu and Jaafar, Mohd Fairuz (2019) An Assessment For A New Approach To Pulsating Lubrication Strategy (PLS) In End Milling. The International Journal of Advanced Manufacturing Technology, 105. pp. 3157-3163. ISSN 0268-3768
Kasim, Mohd Shahir and Mohd Nasir, Faarih Farhan and A Ghani, Jaharah and Raja Abdullah, Raja Izamshah and Mohd Shahrim, Mohammad Shah All Hafiz and Wong, Pui Kei and Yusof, Ahmad Anas and Mohamad, W Noor Fatihah (2019) Analysis On Effect Of Ball Bladder Size During Water Hammer In Domestic Water System. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 61 (1). pp. 33-43. ISSN 2289-7879
W. Mohamad, W Noor Fatihah and Kasim, Mohd Shahir and Mohd Zakaria, Muhammad Akmal and Mohd Shahrim, Mohammad Shah All Hafiz and Mohamed, Saiful Bahri (2019) The Effects Of Indentation Loading Force And Number Of Indentations On The Micro Hardness Variation For Inconel 718. International Journal of Recent Technology and Engineering, 8 (3). pp. 980-983. ISSN 2277-3878
Kasim, Mohd Shahir and Harun, Nurul Hatiqah and Mohd Shahim, Mohammad Shah All Hafiz and W. Mohamad, W Noor Fatihah (2019) Multi-response optimization of process parameter in fused deposition modelling by response surface methodology. International Journal Of Recent Technology And Engineering (IJRTE), 8 (3). pp. 327-338. ISSN 2277-3878
Mizobuchi, Akira and Abdul Aziz, Mohd Sanusi and Kasim, Mohd Shahir and Mohamad, Effendi and Salleh, Mohd Rizal and Raja Abdullah, Raja Izamshah and Ishida, Tohru (2019) Helical Micro-Hole Drilling Of Chemically Strengthened Glass Using Capsule-Shaped Electroplated Diamond Tool. Journal of Advanced Manufacturing Technology, 13 (2). pp. 69-81. ISSN 1985-3157
Kasim, Mohd Shahir and Abdul Aziz, Mohd Sanusi and Mohd Shahrim, Mohammad Shah All-Hafiz and Wong, Pui Kei and Raja Abdullah, Raja Izamshah and W. Mohamad, W Noor Fatihah and Abdul Ghani, Jaharah and Haron, Che Hassan and Saedon, Juri (2019) Chip Morphology In Ball Nose End Milling Process Of Nickel Based Alloy Material Under MQL Condition. The International Journal of Advanced Manufacturing Technology, 102 (9-12). pp. 1-7. ISSN 0268-3768
Kasim, Mohd Shahir and Mohd Shahrim, Mohammad Shah All Hafiz and Ghani Abdul, Jaharah and Che Haron, Che Hassan and Raja Abdullah, Raja Izamshah and Sundi @ Suandi, Syahrul Azwan and Mohamed, Saiful Bahri and Othman, Intan Sharhida (2019) Investigation Of Surface Topology In Ball Nose End Milling Process Of Inconel 718. Wear, 426-42. pp. 1318-1326. ISSN 0043-1648
Salleh, Mohd Shukor and Jaafar, Mohd Fairuz and Raja Abdullah, Raja Izamshah and Hassan, Muhammad Hafiz and Sundi, Syahrul Azwan and Mohd Shahrim, Mohammad Shah All Hafiz and Kasim, Mohd Shahir (2019) Influence On Thrust Force And Delamination For One Shot Drilling Of Carbon Fibre Reinforced Plastic (CFRP). International Journal Of Mechanical And Mechatronics Engineering, 19 (1). pp. 43-56. ISSN 2227-2771
Raja Abdullah, Raja Izamshah and Ramli, Azlan and Kasim, Mohd Shahir and Mohd Zakaria, Muhammad Akmal and Ding, Song Lin (2019) Rotary ultrasonic assisted machining of mould and die material. Journal of Advanced Manufacturing Technology (JAMT), 13 (2(1)). pp. 1-14. ISSN 1985-3157
Abu Bakar, Mohd Hadzley and Abdul Manap, Muhamad Naim Fahmi and Tamin, Nor Fauzi and Azhar, Anis Afuza and Raja Abdullah, Raja Izamshah and Kasim, Mohd Shahir and Md Ali, Mohd Amran and Shamsudin, Noorazizi and Mohamad Raffi, Nurul Fatin (2019) Surface Integrity Study For FC300 Cast Iron Using TiAIN Ball End Mill. Jurnal Tribologi, 21. pp. 35-46. ISSN 2289-7232
Kasim, Mohd Shahir and Che Haron, Che Hassan and A Ghani, Jaharah and Raja Abdullah, Raja Izamshah and Akmal, Suriati and Md Ali, Mohd Amran and Abu Bakar, Mohd Hadzley and Salleh, Mohd Shukor (2018) Investigation Of Tangential Force On Ball Nose Rake Face During High-Speed Milling Of Inconel 718. Advances In Materials And Processing Technologies, 4 (3). pp. 1-7. ISSN 2374-0698
Raja Abdullah, Raja Izamshah and Mohd Zakaria, Muhammad Akmal and Kasim, Mohd Shahir and Mohamed, S.B. (2018) Experimental Analysis On Parameters Affecting The Material Removal Rate In Wire Electrical Discharge Turning Using The Taguchi Method. International Journal Of Mechanical & Mechatronics Engineering (IJMME), 18 (05). pp. 75-82. ISSN 2227-2771
Abu Bakar, Mohd Hadzley and Fahmi, Naim and Mokhtar, Faiz and Tamin, Nor Fauzi and Azlan, Umar Al-Amani and Adam, Abdul Aziz and Raja Abdullah, Raja Izamshah and Kasim, Mohd Shahir (2018) Fabrication And Machining Performance Of Powder Compacted Alumina Based Cutting Tool. MATEC Web Of Conferences, 150. pp. 1-5. ISSN 2261-236X
Yusof, Ahmad Anas and Misha, Suhaimi and Md Isa, Mohamed Hafiz and Wasbari, Faizil and Ibrahim, Mohd Qadafie and Kasim, Mohd Shahir (2018) Simulation And Experimentation Of Water Hydraulics Technology For Automatic Traditional Cookies Production. Journal Of Advanced Research In Fluid Mechanics And Thermal Sciences, 47 (1). pp. 136-150. ISSN 2289-7879
Harun, Nurul Hatiqah and Kasim, Mohd Shahir and Zainal Abidin, Muhammad Zaimi and Raja Abdullah, Raja Izamshah and Attan, Hassan and Ganesan, Hema Nanthini (2018) A Study On Surface Roughness During Fused Deposition Modelling: A Review. Journal Of Advanced Manufacturing Technology (JAMT) , 12 (1 (1)). pp. 25-35. ISSN 1985-3157
Mohamad, Noraiham and Abd Latiff, Anisah and Abd Manaf, Mohd Edeerozey and Ab Maulod, Hairul Effendy and Shueb, Mohammed Iqbal and Munawar, Rose Farahiyan and Raja Abdullah, Raja Izamshah and Kasim, Mohd Shahir and Mazlan, Mazliah and Abd Razak, Jeefferie and Mohd Abid, Mohd Asyadi Azam (2018) Wear Characteristics Of Recycled Carbon Fibre-Filled Polypropylene Composites Via Acidic Surface Treatment. World Review Of Science,Technology And Sust. Development, 14 (2/3). pp. 165-179. ISSN 1741-2234
Mat Harttar, Maziati Akmal and Abd Rashid, Mohd Warikh and Azlan, Umar Al-Amani and Azmi, Nurul Azuwa and Salleh, Mohd Shukor and Kasim, Mohd Shahir (2017) Optimizing The Processing Conditions Of Sodium Potassium Niobate Thin Films Prepared By Sol-Gel Spin Coating Technique. Ceramics International, 44. pp. 317-325. ISSN 0272-8842
Liew, Pay Jun and Shaaroni, Ainusyafiqah and Abd Razak, Jeefferie and Kasim, Mohd Shahir and Sulaiman, Mohd Amri (2017) Optimization Of Cutting Condition In The Turning Of AISI D2 Steel By Using Carbon Nanofiber Nanofluid. International Journal of Applied Engineering Research, 12 (10). pp. 2243-2252. ISSN 0973-4562
Chan, Chee Hoong and Kasim, Mohd Shahir and Raja Abdullah, Raja Izamshah and Abu Bakar, Hamizan and Sundi, Syahrul Azwan and Zakaria, Kamarul Ariffin and Che Haron, Che Hassan and Abdul Ghani, Jaharah and Mohd Shahrim, Mohammad Shah All Hafiz (2017) Analysis Of Face Milling Performance On Inconel 718 Using FEM And Historical Data Of RSM. Materials Science And Engineering, 270 (1). pp. 1-11. ISSN 1757-8981
Md Ali, Mohd Amran and Abdul Aziz, Mohd Sanusi and Redzuwan, Bahrin Ikram and Muhammad Zaimi, Zainal Abidin and Raja Abdullah, Raja Izamshah and Kasim, Mohd Shahir and Mizobuchi, Akira and Ishida, Tohru (2017) Mechanical Properties And Cutting Performance Of Electroless Ternary Ni-W-P Coated Cutting Tools. Jurnal Teknologi , 79 (5-2). pp. 101-104. ISSN 2180-3722
Abdul Hadi, Musfirah and A Ghani, Jaharah and Che Haron, Che Hassan and Kasim, Mohd Shahir (2016) Effect Of Cutting Speed On The Carbide Cutting Tool In Milling Inconel 718 Alloy. Journal Of Materials Research, 31 (13). pp. 1885-1892. ISSN 0884-2914
Zainal Abidin, Muhammad Zaimi and Azran, Mohd Nor and Muhamad, Khaizaki and M., Alifd and Abdul Aziz, Mohd Sanusi and Azam, Mohd Asyadi and Kasim, Mohd Shahir and Munawar, Rose Farahiyan and Abd Manaf, Mohd Edeerozey (2016) Electroless Ni-Co-Cu-P Alloy Deposition In Alkaline Hypophosphite Based Bath. Key Engineering Materials, 694. pp. 151-154. ISSN 1662-9795
Che Haron, Che Hassan and Sulaiman, Mohd Amri and A Ghani, Jaharah and Kasim, Mohd Shahir and Mohamad, Effendi (2016) Performance Of Carbide Tool In High Speed Turning Of TI-6AL-4V ELI Under Conventional Coolant And Minimal Quantity Lubrication. ARPN Journal Of Engineering And Applied Sciences, 11 (7). pp. 4817-4821. ISSN 1819-6608
Zainal Abidin, Muhammad Zaimi and Azran, M.N and Khaizaki, M. and Alif, M. and Abdul Aziz, Mohd Sanusi and Mohd Abid, Mohd Asyadi Azam and Kasim, Mohd Shahir and Munawar, Rose Farahiyan and Abd Manaf, Mohd Edeerozey (2016) Electroless Ni-Co-Cu-P Alloy Deposition in Alkaline Hypophosphite Based Bath. Key Engineering Materials, 694. pp. 151-154. ISSN 1662-9795
Ruslan, Mohd Shahfizal and Othman, Kamal and A Ghani, Jaharah and Kasim, Mohd Shahir and Che Haron, Che Hassan (2016) Surface Roughness Of Magnesium Alloy AZ91D In High Speed Milling. Jurnal Teknologi, 78 (6-9). pp. 115-119. ISSN 0127-9696
A Ghani, Jaharah and Che Haron, Che Hassan and Kasim, Mohd Shahir and Sulaiman, Mohd Amri and Tomadi, Siti Haryani (2016) Wear Mechanism Of Coated And Uncoated Carbide Cutting Tool In Machining Process. Journal Of Materials Research, 31 (13). pp. 1873-1879. ISSN 0884-2914
Mohamad, Noraiham and Mahamood, Mazlin Aida and Abd Razak, Jeefferie and Munawar, Rose Farahiyan and Zainal Abidin , Muhammad Zaimi and Mohd Abid, Mohd Asyadi Azam and Kasim, Mohd Shahir and Othman, Mohd Shahrizan and Shueb, Mohamad Iqbal (2015) Cure characteristics of natural rubber/EPDM blends for the effect of MAH grafted EPDM and compounding parameters via response surface methodology. Applied Mechanics and Materials, 761. pp. 441-446. ISSN 1660-9336 (In Press)
Subramonian, Sivarao and Kasim, Mohd Shahir and Md Ali, Mohd Amran and Raja Abdullah, Raja Izamshah and Anand, T Joseph Sahaya (2015) Micro-Drilling Of Silicon Wafer By Industrial CO2 Laser. International Journal of Mechanical and Materials Engineering , 10 (2). pp. 1-6. ISSN -
Kasim, Mohd Shahir and Atan, Mohamad Hazizan and Che Haron, Che Hassan and A Ghani, Jaharah and Sulaiman, Mohd Amri and Mohamad, Effendi and Mohamad, Minhat and Abu Bakar, Mohd Hadzley and Saedon, Juri (2015) Analysis Of Tool Performance During Ball-End Milling Of Aluminium Alloy 6061-T6. Applied Mechanics and Materials, 761. pp. 318-323. ISSN 1662-7482
Abdullah, Zulkeflee and Janin @ Abd. Karim, Nurul Fadzlina and Md Ali, Mohd Amran and Shamsudin, Shamsul Anuar and Kasim, Mohd Shahir and Samat, Khairul Fadzli (2015) Design And Development Of Weaving Aid Tool For Rattan Handicraft. Applied Mechanics and Materials, 761 (-). pp. 277-281. ISSN 1660-9336
Md Ali, Mohd Amran and M., Faizal and Kasim, Mohd Shahir and Raja Abdullah, Raja Izamshah and Subramonian, Sivarao (2015) Product And Tooling Design Of Slanted Glass Injection Mould For Visualization Of Flow Molten Plastic. Jurnal Teknologi, 77 (21). pp. 9-18. ISSN 0127-9696
Minhat, Mohamad and Sulaiman, Mohd Amri and Kasim, Mohd Shahir (2014) RETROFITTING A CONVENTIONAL LATHE TO A DIGITAL INTELLIGENCE SYSTEM. Journal of advanced Manufacturing Technology (AMT). pp. 1-8. ISSN Nil (Submitted)
Raja Abdullah, Raja Izamshah and J.P.T. , Mo and S., Ding and A Rahman, Muhamad Arfauz and Mohd Abid, Mohd Asyadi Azam and Kasim, Mohd Shahir (2014) Effect Of Parameter Condition On Surface Roughness For Machining AISI D2 Hardened Tool Steel. Journal of Advanced Manufacturing Technology (JAMT) , 8 (1). pp. 47-56. ISSN 1985-3157
Md Ali, Mohd Amran and Salmah, Siti and Zaki, Mohd and RAJA ABDULLAH, RAJA IZAMSHAH and Abu Bakar, Mohd Hadzley and Subramonian, Sivarao and Kasim, Mohd Shahir and Sulaiman, Mohd Amri (2014) The Effect of Pressure on Warpage of Dumbbell Plastic Part in Injection Moulding Machine. Advanced Materials Research, 903. pp. 61-66. ISSN 1662-8985
Sulaiman, Mohd Amri and Kasim, Mohd Shahir (2014) Effect of high-speed parameters on uncoated carbide tool in finish turning Titanium Ti-6Al-4V ELI. Sains Malaysiana, 43. pp. 111-116. ISSN 0126-6039
Kasim, Mohd Shahir and Raja Abdullah, Raja Izamshah and Md Ali, Mohd Amran and Abdul Aziz, Mohd Sanusi and Mohd Abid, Mohd Asyadi 'Azam and Che Haron, Che Hassan and A Ghani, Jaharah (2014) The Influence Of Cutting Parameter On Heat Generation In High-Speed Milling Inconel 718 Under MQL Condition. Journal of Scientific & Industrial Research (JSIR), 73 (1). pp. 62-65. ISSN 0975-1084 (Online); 0022-4456 (Print)
Raja Abdullah, Raja Izamshah and Hassan, Zulhairy and Kasim, Mohd Shahir and Abu Bakar, Mohd Hadzley and Md Ali, Mohd Amran and Sulaiman, Mohd Amri and Subramonian, Sivarao (2014) Cutter Path Strategies For Shoulder Milling Of Thin Deflecting Walls. Advanced Materials Research, 903 (-). pp. 175-180. ISSN 1662-8985
Kasim, Mohd Shahir and Mohd Zahudi, Mohd Sufri and Che Haron, Che Hassan and A Ghani, Jaharah and Raja Abdullah, Raja Izamshah and Mohd Isa, Mohd Hanafiah and Saedon, Juri and Roni Sahroni, Taufik and Ito, Teruaki (2014) The Effect Of WEDM Cutting Parameter On Inconel 718 Subsurface Microhardness. Journal of Advanced Manufacturing Technology, 8 (2). pp. 51-59. ISSN 1985-3157
Raja Abdullah, Raja Izamshah and Mohd Nawawi, Nurul Husna and Abu Bakar, Mohd Hadzley and Md Ali, Mohd Amran and Kasim, Mohd Shahir and Sulaiman, Mohd Amri (2014) Effects Of Cutter Geometrical Features On Machining Polyetheretherketones (PEEK) Engineering Plastic. Journal of Mechanical Engineering and Sciences (JMES), 6 (-). pp. 863-872. ISSN 2289-4659
Abu Bakar, Mohd Hadzley and Ahmad, Siti Sarah Nadia and Raja Abdullah, Raja Izamshah and Md Ali, Mohd Amran and Kasim, Mohd Shahir and Sulaiman, Mohd Amri and Mohamad Raffi, Nurul Fatin (2014) Evaluation Of The Surface Integrity When Machining LM6 Aluminum Metal Matrix Composites Using Coated And Uncoated Carbide Cutting Tools. Applied Mechanics and Materials, 465-16 (-). pp. 1049-1053. ISSN 1660-9336
Kasim, Mohd Shahir (2014) Investigation on Wear Behavior and Chip Formation During Up-Milling and Down-Milling Operations for Inconel 718. Jurnal Teknologi (Sciences and Engineering), 66 (3). pp. 15-21. ISSN 21803722
Mohd Abid, Mohd Asyadi Azam and Talib, Elyas and Mohamad, Noraiham and Kasim, Mohd Shahir and Abd Rashid , Mohd Warikh (2014) Mechanical and Thermal Properties of Single-Walled Carbon Nanotube Filled Epoxidized Natural Rubber Nanocomposite. Journal of Applied Sciences, 14 (18). pp. 2183-2188. ISSN 1812-5654
Kasim, Mohd Shahir (2014) Modeling and Multi-response Optimization on WEDM Ti6Al4V. Applied Mechanics and Materials, 510. pp. 123-129. ISSN 1660-9336
Kasim, Mohd Shahir and Che Haron, Che Hassan and A Ghani, Jaharah and Mohamad, Effendi and Raja Abdullah, Raja Izamshah and Md Ali, Mohd Amran and Saedon, Juri (2014) Multi-Objective Optimization Using Box-Behken Of Response Surface Methodology For High-Speed Machining Of Inconel 718. Applied Mechanics and Materials, 629 (-). pp. 487-492. ISSN 1660-9336
Kasim, Mohd Shahir and Che Haron, Che Hassan and A Ghani, Jaharah and Mohamad, Effendi and Raja Abdullah, Raja Izamshah and Md Ali, Mohd Amran and Saedon, Juri (2014) Multi-Objective Optimization Using Box-Behnken Of Response Surface Methodology For High-Speed Machining Of Inconel 718. Applied Mechanics and Materials, 629. pp. 487-492. ISSN 1662-7482
Kasim, Mohd Shahir and Raja Abdullah, Raja Izamshah and Minhat, Mohamad and Mohamad, Noraiham and Che Haron, Che Hassan and A Ghani, Jaharah and Saedon, Juri and Saad, Nor Hayati and Mohamed, Saiful Bahri (2014) Prediction Of Cutting Force In End Milling Of Inconel 718. Journal of Engineering and Technology (JET), 5 (2). pp. 63-70. ISSN 2180-3811
Mohamad, Effendi and T., Ito and D., Yuniawan and Ibrahim, Mohamad Amran and Saptari, Adi and Kasim, Mohd Shahir and Raja Abdullah, Raja Izamshah and Shibghatullah, Abdul Samad and Md Ali, Mohd Amran (2014) A Proposal Of Muda Indicator Agent To Estimate Lean Manufacturing Verification. Journal Of Advanced Manufacturing Technology, 8 (2). pp. 71-82. ISSN 1985-3157
Mohamad, Effendi and Ito, Teruaki and Yuniawan, Dani and Ibrahim, Mohamad Amran and Saptari, Adi and Kasim, Mohd Shahir and Raja Abdullah, Raja Izamshah and Shibghatullah, Abdul Samad and Md Ali, Mohd Amran (2014) A Proposal Of Muda Indicator Agent To Estimate Lean Manufacturing Verification. Journal of Advanced Manufacturing Technology (JAMT) , 8 (2). pp. 71-82. ISSN 1985-3157
Abu Bakar, Mohd Hadzley and Raja Abdullah, Raja Izamshah and Md Ali, Mohd Amran and Kasim, Mohd Shahir and Sulaiman, Mohd Amri and Ahmad, Siti Sarah Nadia and Mohamad Raffi, Nurul Fatin (2014) Surface Integrity Of LM6 Aluminum Metal Matrix Composite When Machined With High Speed Steel And Uncoated Carbide Cutting Tools. Journal of Mechanical Engineering and Sciences (JMES), 6 (-). pp. 854-862. ISSN 2289-4659
Md Ali, Mohd Amran and Mohd Sani, Siti Salmah and Mohd, Zaki and RAJA ABDULLAH, RAJA IZAMSHAH and Abu Bakar, Mohd Hadzley and Subramonian, Sivarao and Kasim, Mohd Shahir and Sulaiman, Mohd Amri (2014) The effect of pressure on warpage of dumbbell plastic part in injection moulding machine. Applied Mechanics and Materials, 529. pp. 61-66. ISSN 1662-7482.
Mohamad, Effendi and Ito, Teruaki and Yuniawan, Dani and Ibrahim, M. A. and Saptari, Adi and Kasim, Mohd Shahir and Raja Abdullah, Raja Izamshah and Shibghatullah, Abdul Samad and Md Ali, Mohd Amran (2014) A proposal of Muda Indicator agent to estimate Lean Manufacturing verification. Journal of Advanced Manufacturing Technology (JAMT) , 8 (2). pp. 71-82. ISSN 1985-3157
Kasim, Mohd Shahir and Che Haron, Che Hassan and A Ghani, Jaharah and Gusri, Akhyar Ibrahim and Mohd Zaid, Abdul Yazid and Sulaiman, Mohd Amri (2013) Tool Life Of TiAlN PVD Coated Carbide Tool In High-Speed End Milling Of Untreated Inconel 718 Under Minimum Quantity Lubrication Condition. Sains Malaysiana, 42 (12). pp. 1721-1726. ISSN 0126-6039
Kasim, Mohd Shahir and Sulaiman, Mohd Amri (2013) Cutting Performances of Coated PVD in High Speed End Milling of Aged Inconel 718. Materials Science Forum, 773-774. pp. 653-660. ISSN 1662-9752
Kasim, Mohd Shahir (2013) Surface Integrity of Newly Developed of Alsi/AlN Metal Matrix Composite during End Milling Under Dry Cutting Conditions. Research Journal of Applied Sciences, Engineering and Technology, 6 (6). pp. 1129-1134. ISSN 2040-7467
Kasim, Mohd Shahir and Sulaiman, Mohd Amri (2013) Wear mechanism and notch wear location prediction model in ball nose end milling of Inconel 718. Wear, 302 (1-2). pp. 1171-1179. ISSN 0043-1648
Kasim, Mohd Shahir and Sulaiman, Mohd Amri (2013) Prediction Surface Roughness in High-Speed Milling of Inconel 718 Under Mql Using Rsm Method. Middle-East Journal of Science Research, 13 (3). pp. 264-272. ISSN 1990-9233
Kasim, Mohd Shahir (2013) Comparison between up-milling and down-milling operations on tool wear in milling Inconel 718. Procedia Engineering, 68. pp. 647-653. ISSN 18777058
Sulaiman, Mohd Amri and Kasim, Mohd Shahir (2012) The Study Of Wear Process On Uncoated Carbide Cutting Tool In Machining Titanium Alloy. Journal of Applied Sciences Research. pp. 4821-4827. ISSN 1819-544X
Che Haron, Che Hassan and A Ghani, Jaharah and Sulaiman, Mohd Amri and Lutfiah Intan and Kasim, Mohd Shahir (2011) The Effect Of Minimal Quantity Lubrication (MQL) On The Surface Roughness Of Titanium Alloy Ti-6Al-4V ELI In Turning Process. Advanced Materials Research Journal, 146-14 (1750). pp. 1750-1753. ISSN 10.4028
Kasim, Mohd Shahir and Sulaiman, Mohd Amri (2011) Surface Integrity of Inconel 718 under MQL condition. Advanced Materials Research, 150-15. 1667 -1672. ISSN 1022-6680
Book Chapter
Mohamad, Noraiham and Karim, Khairu Ilwani and Abd Razak, Jeefferie and Ab Maulod, Hairul Effendy and Mazlan, Mazliah and Mohd Abid, Mohd Asyadi Azam and Kasim, Mohd Shahir and Raja Abdullah, Raja Izamshah (2018) Swelling Effects Of NR/EPDM Filled Graphene Nanoplatelets (GNPs) In Different Type Of Service Oils For Engine Mounting. In: Proceedings of Mechanical Engineering Research Day 2018. Centre for Advanced Research on Energy (UTeM), Centre for Advanced Research on Energy, 2018, pp. 243-245. ISBN 9672145209, 9789672145202
Conference or Workshop Item
Sundi, Syahrul Azwan and Izamshah, Raja and Kasim, Mohd Shahir and Othman, Intan Sharhida and Raffay, Mohamad Razly (2023) Surface roughness analysis of five-axis flank milling strategies for slanted thin-walled pocketing: aerospace part. In: 6th International Conference in Mechanical Engineering Research, ICMER 2021, 26 October 2021 through 27 October 2021, Virtual, Online.
Yusof, Ahmad Anas and Misha, Suhaimi and Wasbari, Faizil and Isa, Mohamed Hafiz Bin Md and Ibrahim, Mohd Qadafie and Kasim, Mohd Shahir (2023) Transient pressure analysis in water hydraulics machine using induced pressure effect from the compression of different materials. In: Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2022, 20 July 2022through 20 July 2022, Pekan.
Kasim, Mohd Shahir and Raja, Izamshah and Joseph Sahaya Anand, T and Zakaria, Nor Fakhriah (2015) Modeling and optimization of cutting parameter during Wire-EDM of Inconel 718 using response surface. In: JSME Manufacturing Systems Division Conference 2015, 16 March 2015, Keio University, Yokohama.
Md Ali, Mohd Amran and Raja Abdullah, Raja Izamshah and Hussein, Nur Izan Syahriah and Kasim, Mohd Shahir and Sulaiman, Mohd Amri and Salleh, Mohd Rizal and Mohamad, Effendi and Subramonian, Sivarao and Liew, Pay Jun and Abdullah, Zulkeflee (2014) Performance of wire-EDM parameters on machining characteristics of titanium alloy (Ti6Al4V) using Taguchi method. In: Malaysia University Conference Engineering Technology 2015, 10-11 November 2014, Melaka.
Kasim, Mohd Shahir and Sulaiman, Mohd Amri and Mohamad, Effendi and Abu Bakar, Mohd Hadzley and Minhat, Mohamad (2014) Analysis of Tool Performance during Ball-end Milling of Aluminium Alloy 6061-T6. In: iDECON 2014 – International Conference on Design and Concurrent Engineering, 21 - 23 September 2014, Melaka.
Roni Sahroni, Taufik and Kamaruddin, Mohammad Aizrulshah and Kasim, Mohd Shahir and Md Ali, Mohd Amran and Mohamad, Effendi and Ito, Teruaki (2014) Design and optimization of runner and gating systems for permanent mould casting. In: 24th Design Engineering Systems Division JSME Conference Japan Society of Mechanical Engineers, 17-19th September, JSME Conference Japan Society of Mechanical Engineers, .
Minhat, Mohamad and Kasim, Mohd Shahir and Sulaiman, Mohd Amri (2014) RETROFITTING A CONVENTIONAL LATHE TO A DIGITAL INTELLIGENCE SYSTEM. In: International Conference on Artificial Intelligence and Computer Science (AICS 2014), 15 - 16 September 2014, Bandung, Indonesia.
Minhat, Mohamad and Kasim, Mohd Shahir (2014) MACHINING PARAMETERS OPTIMIZATION FOR TRIMMING OPERATION IN A MILLING MACHINE USING TWO LEVEL FACTORIAL DESIGN. In: 5th International Conference on Mechanical, Industrial and Manufacturing Technologies MIMT2014, 10-11 March 2014, Penang Malaysia. (Submitted)
Kasim, Mohd Shahir and Sulaiman, Mohd Amri and Md. Ali, Mohd Amran and Abdul Aziz, Mohd Sanusi and Mohamad, Noraiham and Raja, Izamshah (2013) Prediction of Cutting Force in End Milling of Inconel 718. In: Malaysian Technical Universities Conference on Engineering & Technology (MUCET), 3-4 December 2013, Kuantan, Pahang. (Submitted)
Mohamad, Noraiham and Mahamood, Mazlin Aida and Yaakub, Juliana and Abdul Razak, Jeefferie and Muchtar, Andanastuti and Shueb, Mohammed Iqbal and Kasim, Mohd Shahir and Mohd Abid, Mohd Asyadi Azam and Yaakob, Mohd Yuhazri and Mustafa, Nuzaimah and Toibah, Abd Rahim and Qumrul, Ahsan (2013) FUNCTIONALISATION OF ETHYLENE-PROPYLENE COPOLYMER (EPM) BY MELT GRAFTING OF MALEIC ANHYDRIDE (MAH) USING HIGH SHEAR INTERNAL MIXER. In: International Conference on the Science and Engineering of Materials, 13-14 Nov 2013, Kuala Lumpur, Malaysia.
Mohd , amran and Salmah, Siti and Hussein, Nur Izan Syahriah and Raja, Izamshah and Mohd , Hadzley and Sivarao, Subramonian and Kasim, Mohd Shahir and Sulaiman, Mohd Amri (2013) Effects of Machine Parameters on Surface Roughness Using Response Surface Method in Drilling Process. In: Malaysian International Tribology Conference , November 18-20, 2013, Kota Kinabalu, Sabah, Malaysia.
Kasim, Mohd Shahir and Sulaiman, Mohd Amri and RAJA ABDULLAH, RAJA IZAMSHAH (2013) Assessment of environmental friendly application of biodegradable MQL coolant in end milling of Inconel 718. In: 16th Conference of the European Roundtable on Sustainable Consumption and Production (ERSCP), 4-7 June 2013, Istanbul, Turki.
Kasim, Mohd Shahir (2013) Comparison between Taguchi Method and Response Surface Methodology (RSM) In Optimizing Machining Condition. In: UNSPECIFIED.
Kasim, Mohd Shahir and Sulaiman, Mohd Amri (2010) TOOL LIFE INVESTIGATION IN DRY TURNING OF INCONEL 718 WITH PVD TiAlN-COATED WC INSERT. In: Conference on Engineering and Technology Education, 2nd – 5th August 2010, Kuching, Sarawak.
Sulong, Muhammad Suhaizan and Abdul-Aziz, Azlianor and Kasim, Mohd Shahir and Md Fauadi, Muhammad Hafidz Fazli (2008) A Mobile Application Architecture for Measuring Shaft Misalignment. In: 1st International Conference on Plant Equipment and Reliability (ICPER), 27-28 Mar 2008, Selangor, Malaysia.
Kasim, Mohd Shahir and Salleh, Mohd Rizal and Sivarao, Subramonian (2008) Experimental Investigation of Significance Parameters in Surface Grinding – Quality Evaluation. In: National Conference on Design & Concurrent Engineering, 28-29 October 2008, Melaka.
Kasim, Mohd Shahir and Salleh, Mohd Rizal and Abd Rahman, Ammar and Abd Rahim, Nurul Hidayah (2008) An Investigation of the Impact of Cylindrical Grinding Parameters on Surface Roughness. In: National Conference on Design & Concurrent Engineering, 28-29th October 2008, Melaka.
Kasim, Mohd Shahir and S.A Faizal and Raja Abdullah, Raja Izamshah and Che Zainal Abidin, Nik Mohd Farid (2007) Hot Alignment Solution Using Spreadsheet Application. In: Conference On Application And Design In Mechanical Engineering, 25-26 Ocktober 2007, Perlis.
Patent
Raja Izamshah Raja Abdullah (2014) A plastic wall tile and method of manufacturing thereof. PI 2014703490.