Items where Author is "Omar, Mohd Zaidi"

Article

Omar, Mohd Zaidi and Salleh, Mohd Shukor and Wakhi Anuar, Nur Farah Bazilah and W. Zamr, Wan Fathul Hakim and Md Ali, Afifah (2024) Effect of graphene addition on microstructure and wear behaviour of the A356-based composite fabricated by thixoforming process. Journal of Materials Research and Technology, 30. pp. 4813-4831. ISSN 2238-7854

Omar, Mohd Zaidi and Md Ali, Afifah and Salleh, Mohd Shukor and Hashim, Hanizam and Wakhi Anuar, Nur Farah Bazilah and Mohamed, Intan Fadhlina (2024) Effect of heat treatment on the microstructures and mechanical properties of thixoformed graphene-reinforced aluminium alloy composite. International Journal of Metalcasting, 18 (2). pp. 1695-1709. ISSN 1939-5981

Wakhi Anuar, Nur Farah Bazilah and Omar, Mohd Zaidi and Salleh, Mohd Shukor and WWan Zamri, Wan Fathul Hakim and Md Ali, Afifah (2024) Effect of short heat treatments on the microstructural evolution and hardness of thixoformed graphene reinforced aluminium composites (Kesan rawatan haba singkat terhadap evolusi mikrostruktur dan kekerasan komposit aluminium diperkuat grafen pembentukan tikso). Sains Malaysiana, 53 (3). pp. 705-717. ISSN 0126-6039

Salleh, Mohd Shukor and Wakhi Anuar, Nur Farah Bazilah and Omar, Mohd Zaidi and Wan Fathul Hakim, Wan Zamri and Yahaya, Siti Norbaya and Ali,, A. M. (2023) Effect of T6 heat treatment on microstructure and hardness properties of thixoformed graphene-reinforced A356 composites. Journal of Advanced Manufacturing Technology (JAMT), 17 (1). pp. 1-13. ISSN 1985-3157

Hashim, Hanizam and Salleh, Mohd Shukor and Marjom, Zolkarnain and Boejang, Hambali and Sundi @ Suandi, Syahrul Azwan and Abdul Rasib, Amir Hamzah and Sulong, Abu Bakar and Omar, Mohd Zaidi (2023) Effect of heat treatment cycles on tensile performance and microstructural evolution of thixoformed MWCNT-A356 composite. Journal Of Engineering Science And Technology, 18 (2). pp. 1323-1338. ISSN 1823-4690

Salleh, Mohd Shukor and Omar, Mohd Zaidi and Wakhi Anuar, Nur Farah Bazilah and W. Zamri, Wan Fathul Hakim and Md Ali, Afifah and Samat, Saziana (2023) Wear properties of graphene-reinforced aluminium metal matrix composite: A review. Reviews on Advanced Materials Science, 62 (1). pp. 1-27. ISSN 1606-5131

Md Ali, Afifah and Omar, Mohd Zaidi and Mohamed, Intan Fadhlina and Wakhi Anuar, Nur Farah Bazilah and Salleh, Mohd Shukor and Hashim, Hanizam (2022) Mechanical behaviour and morphology of thixoformed aluminium alloy reinforced by graphene. Materials, 15 (19). pp. 1-15. ISSN 1996-1944

Salleh, Mohd Shukor and Wakhi Anuar, Nur Farah Bazilah and Yahaya, Saifudin Hafiz and Omar, Mohd Zaidi and Ali, Mohd Azamuddin and Subramonian, Sivarao (2022) Characteristics of A1Si7Mg0.3/X-GNPs composites manufactured via stir casting method. Journal Of Advanced Manufacturing Technology (JAMT), 16 (2). pp. 29-40. ISSN 1985-3157

Md Ali, Afifah and Omar, Mohd Zaidi and Hashim, Hanizam and Salleh, Mohd Shukor and Mohamed, Intan Fadhlina (2021) Recent development in graphene-reinforced aluminium matrix composite: a review. Reviews on Advanced Materials Science, 60. pp. 801-817. ISSN 1606-5131

Hashim, Hanizam and Salleh, Mohd Shukor and Abd Rahman, Mohd Soufhwee and Yahaya, Saifudin Hafiz and Abd Rashid, Mohd Warikh and Omar, Mohd Zaidi and Al-Zubaidi, Salah and Sulong, Abu Bakar (2020) T6 Heat Treatment Optimization Of Thixoformed LM4 Aluminium Alloy Using Response Surface Methodology. Malaysian Journal on Composites Science and Manufacturing, 3 (1). pp. 1-13. ISSN 2716-6945

Salleh, Mohd Shukor and Yahaya, Saifudin Hafiz and Mohamad, Noraiham and Hashim, Hanizam and Omar, Mohd Zaidi (2020) Mechanical Properties Of Thixoformed Al-5Si Alloy Composite Reinforced By Multiwalled Carbon Nanotubes And Alumina Powder. Malaysian Journal on Composite Science and Manufacturing, 1 (1). pp. 38-44. ISSN 2716-6945

Hashim, Hanizam and Salleh, Mohd Shukor and Omar, Mohd Zaidi (2019) Homogenous Dispersion And Interfacial Bonding Of Carbon Nanotube Reinforced With Aluminum Matrix Composite: A Review. Reviews On Advanced Materials Science, 58 (1). pp. 295-303. ISSN 1605-8127

Alhawari, Khaled Salem and Omar, Mohd Zaidi and Ghazali, Mariyam Jameelah and Salleh, Mohd Shukor and Abdulrazaq, Mohammed Naser (2017) Effect Of Thixoforming On The Wear Properties Of Al-Si-Cu Aluminum Alloy. Jurnal Teknologi , 79 (5-2). pp. 83-87. ISSN 0127-9696

Salleh, Mohd Shukor and Omar, Mohd Zaidi and Alhawari, Khalid Salim and Mohammed, Mohammed Naser and Md Ali, Mohd Amran and Mohamad, Effendi (2016) Microstructural evolution and mechanical properties of thixoformed A319 alloys containing variable amounts of magnesium. Transactions of Nonferrous Metals Society of China, 26. pp. 2029-2042. ISSN 1003-6326

Aziz, Ahmad and Omar, Mohd Zaidi and Salleh, Mohd Shukor (2016) Microstructural Evolution Of A333 Alloy Through Semisolid Metal Process. Sains Malaysiana, 45 (6). pp. 977-987. ISSN 0126-6039

Alhawari, Khalid Salim and Omar, Mohd Zaidi and Ghazali, Mariyam Jameelah and Salleh, Mohd Shukor (2016) Dry Sliding Wear Behaviour Of Thixoformed Hypoeutectic AL–SI–CU Alloy With Different Amounts Of Magnesium. Journal Composite Interfaces, 23 (6). pp. 519-531. ISSN 0927-6440

Salleh, Mohd Shukor and Omar, Mohd Zaidi (2015) Influence of Cu content on microstructure and mechanical properties of thixoformed Al−Si−Cu−Mg alloys. Transactions of Nonferrous Metals Society of China, 25. pp. 3523-3538. ISSN 1003-6326

Salleh, Mohd Shukor and Mohammed, M.N. and Omar, Mohd Zaidi and Sajuri, Zainuddin and Alhawari, Khaled Salem (2015) Trend And Development Of Semisolid Metal Joining Processing. Advances in Materials Science and Engineering, 2015. pp. 1-13. ISSN 1687-8434

Salleh, Mohd Shukor and Omar, Mohd Zaidi and Syarif, Junaidi and Alhawari, Khalid Salim and Mohammed, Mohamad Naser (2015) Effects of Cu on the microstructures and tensile properties of thixoformed Al-Si alloys. Solid State Phenomena. pp. 91-98. ISSN 1662-9779

Salleh, Mohd Shukor and Omar, Mohd Zaidi and Syarif, Junaidi and Mohammed, Mohammed Naser and Alhawari, Khaled Salem (2015) Effect of pouring temperature and cooling slope length on microstructure and mechanical properties of Rheocast A319 aluminium alloy. Applied Mechanics and Materials, 699. pp. 251-256. ISSN 1660-9366

Salleh, Mohd Shukor and Omar, Mohd Zaidi and Syarif, Junaidi (2014) The effects of mg addition on the microstructure and mechanical properties of Thixoformed Al-5%Si-Cu alloys. Journal of Alloys and Compounds. pp. 121-130. ISSN 0925-8388

Salleh, Mohd Shukor and Omar, Mohd Zaidi and Syarif, Junaidi and Alhawari, Khalid Salim and Mohammed, Mohammed Naser (2014) The effects of Cu content on microstructure and mechanical properties of thixoformed A319 aluminium alloys. Applied Mechanics and Materials, 548-549. pp. 237-241. ISSN 1660-9336

Salleh, Mohd Shukor and Omar, Mohd Zaidi and Syarif, Junaidi and Mohammed, Mohammed Naser and Alhawari, Khalid Salim (2014) Microstructure evolution and mechanical properties of rheocast A319 aluminum alloy using cooling slope. Applied Mechanics and Materials, 663. pp. 261-265. ISSN 1660-9336

Salleh, Mohd Shukor and Mohammed, M.N. and Omar, Mohd Zaidi and Syarif, Junaidi (2014) Morphological Evolution During Partial Re-Melting Of AISI D2 Cold-Work Tool Steel. Sains Malaysiana, 43 (8). pp. 1213-1219. ISSN 0126-6039

Salleh, Mohd Shukor and Omar, Mohd Zaidi and Syarif, Junaidi and Alhawari, Khalid Salim and Mohammed, Mohamad Naser (2014) Microstructure and mechanical properties of thixoformed A319 aluminium alloy. Materials and Design, 64. pp. 142-152. ISSN 0261-3069

Salleh, Mohd Shukor and Omar, Mohd Zaidi and Syarif, Junaidi and Mohammed, Mohammed Naser (2014) Thermodynamic modelling of Al-Si-Cu alloys for semisolid processing. Sains Malaysiana, 43. pp. 791-798. ISSN 0126-6039

Salleh, Mohd Shukor and Omar, Mohd Zaidi and Syarif, Junaidi and Mohammed, Mohamad Naser and Alhawari, Khalid Salim (2013) Thermodynamic simulation on thixoformability of aluminium alloys for semi-solid metal processing. International Journal of Mathematics and Computers in Simulation, 7 (3). pp. 286-293. ISSN 1998-0159

Salleh, Mohd Shukor and Omar, Mohd Zaidi and Syarif, Junaidi and Mohammed, Mohamad Naser (2013) An overview of semisolid processing of aluminium alloys. ISRN Materials Sciences. pp. 1-9. ISSN 2356-7872