Items where Author is "Salim, Mohd Azli "
 | Up a level |
Article
Salim, Mohd Azli and Mohammad Noor, Norida and Masripan, Nor Azmmi and Md. Saad, Adzni and Akop, Mohd Zaid and Chew, Kit Wayne and Photong, Chonlatee and Feng, Dai (2024) Effect of GNP/Ag stretchable conductive ink on electrical conductivity. Journal of Advanced Research in Applied Mechanics, 119 (1). pp. 1-12. ISSN 2289-7895
Salim, Mohd Azli and Hussin, Hazril Hisham and Masripan, Nor Azmmi and Akop, Mohd Zaid and Md. Saad, Adzni and Wayne, Chew Kit and Photong, Chonlatee and Dai, Feng (2024) Electrical effects of GNP/Ag/SA conductive epoxy on copper flexible substrate. Journal of Advanced Research in Applied Mechanics, 119 (1). pp. 13-26. ISSN 2289-7895
Salim, Mohd Azli and Ab Wahid, Ameeruz Kamal and Masripan, Nor Azmmi and Md. Saad, Adzni and Akop, Mohd Zaid and Feng, Dai (2022) Analyse of strain and stress on different stretchable conductive ink materials by numerical method. International Journal of Nanoelectronics and Materials, 15 (SI). pp. 429-440. ISSN 1985-5761
Akop, Mohd Zaid and Jikol, Favian and Salim, Mohd Azli and Mohamed Arifin, Yusmady and Herawan, Safarudin Gazali (2022) Biofuel development in Malaysia: Challenges and future prospects of palm oil biofuel. International Journal of Nanoelectronics and Materials, 15 (SI). pp. 159-181. ISSN 1985-5761
Salim, Mohd Azli and Ab Wahid, Ameeruz Kamal and Masripan, Nor Azmmi and Photong, Chonlatee and Md. Saad, Adzni and Akop, Mohd Zaid (2022) Transient thermal simulation analysis of die-attach adhesives. International Journal of Nanoelectronics and Materials, 15 (SI). pp. 505-522. ISSN 1985-5761
Al-Mola, Mohammed Hussin Ahmed and Salim, Mohd Azli and Mailah, Musa (2021) Applying active force control with fuzzy self-tuning PID to improve the performance of an antilock braking system. International Journal of Nanoelectronics and Materials, 14 (SI). pp. 489-501. ISSN 1985-5761
Salim, Mohd Azli and Hosnie, Aina Natasha and Masripan, Nor Azmmi and Md. Saad, Adzni and Sudin, Mohd Nizam and Naroh, Azmi and Feng, Dai (2021) Characterisation of mechanical-electrical properties of graphene nanoplatelets filled epoxy as conductive ink in various patterns. International Journal of Nanoelectronics and Materials, 14 (SI). pp. 439-456. ISSN 1985-5761
Salim, Mohd Azli and Ab Wahid, Ameeruz Kamal and Masripan, Nor Azmmi and Md. Saad, Adzni and Photong, Chonlatee (2021) Comparison measurements of low resistance and high strength on synthesis graphene conductive ink filled epoxy. International Journal of Nanoelectronics and Materials, 14 (SI). pp. 333-342. ISSN 1985-5761
Salim, Mohd Azli and Masripan, Nor Azmmi and Md. Saad, Adzni and Ab Wahid, Ameeruz Kamal and Ali, Murni and Al-Mola, Mohammed Hussin A. (2021) The Effect Of Curing Time On Electrical Resistivity, Mechanical Characteristics And Microstructure Behavior Of Graphene Conductive Ink. International Journal of Nanoelectronics and Materials, 14 (SI). pp. 373-386. ISSN 1985-5761
Masripan, Nor Azmmi and Salim, Mohd Azli and Lin, Soong Jin and Mansor, Muhd Ridzuan and Akop, Mohd Zaid and Abdul Hamid, Nurfaizey and Wasbari, Faizil and Noordin, Aminurrashid (2021) Effect Of Stretchable Conductive Ink (SCI) On Electrical Conductivity Under Tensile Stress. International Journal of Nanoelectronics and Materials, 14 (SI). pp. 429-437. ISSN 1985-5761
Salim, Mohd Azli and Md. Saad, Adzni and Ahmad, Fauzi and Akop, Mohd Zaid and Al-Mola, Mohammed Hussin A. and Saad, Hartini (2021) Effect of the different printing patterns of graphene nanoparticles in conductive ink on electrical and mechanical performance. International Journal of Nanoelectronics and Materials, 14 (SI). pp. 225-240. ISSN 1985-5761
Salim, Mohd Azli and Md. Saad, Adzni and Abdullah, Siti Amirah and Wasbari, Faizil and Ali, Murni and Feng Dai (2021) Geometrical Characterization And Effect Of Temperature On Graphene Nanoparticles Conductive Ink. International Journal of Nanoelectronics and Materials, 14 (SI). pp. 275-287. ISSN 1985-5761
Wasbari, Faizil and Salim, Mohd Azli and Abdul Hamid, Nurfaizey (2021) Investigation of pressure drop in hydro-pneumatic driveline propulsion system for dual hybrid passenger vehicle. International Journal of Nanoelectronics and Materials, 14. pp. 413-428. ISSN 1985-5761
Salim, Mohd Azli and Masripan, Nor Azmmi and Md. Saad, Adzni and Dai, Feng and Noordin, Aminurrashid and Mohd Yusof, Norbazlan (2021) Mathematical modelling of passive discrete lumped parameter system using standard Malaysian rubber constant viscosity. International Journal of Nanoelectronics and Materials, 14 (SI). pp. 289-310. ISSN 1985-5761
Salim, Mohd Azli and Md. Saad, Adzni and Akop, Mohd Zaid and Photong, Chonlatee and Md. Zain, Mohd Zarhamdy and Abu Bakar, Abd Rahim and Mohd Yusof, Norbazlan (2021) Modelling and estimation on vibration and noise level of the dynamic wiper system using input shaping strategy. International Journal of Nanoelectronics and Materials, 14 (SI). pp. 311-332. ISSN 1985-5761
Salim, Mohd Azli and Masripan, Nor Azmmi and Md. Saad, Adzni and Abdul Hamid, Nurfaizey and Feng Dai and Mohd Yusof, Norbazlan (2021) Prediction Of Basic And Circular Vibration Isolator In High Frequencies Using Malaysian Natural Rubber For Highway C2L Machine. International Journal of Nanoelectronics and Materials, 14 (SI). pp. 241-262. ISSN 1985-5761
Abdul Hamid, Nurfaizey and Salim, Mohd Azli and Md. Saad, Adzni and Mohd Rosli, Mohd Afzanizam and Abdul Munajat, Nurain and Esa, Siti Rahmah and Tucker, Nick (2021) Preparation, characterization, and electrical conductivity investigation of multi-walled carbon nanotube-filled composite nanofibres. International Journal of Nanoelectronics and Materials, 14 (SI). pp. 191-200. ISSN 1985-5761
Akop, Mohd Zaid and Lai, Tian Wei and Salim, Mohd Azli and Mohd Rosli, Mohd Afzanizam and Abdul Hamid, Nurfaizey and Mansor, Muhd Ridzuan and Md. Saad, Adzni and Mohamed Arifin, Yusmady and Herawan, Safarudin Gazali (2021) A Simulation Study On Performance Of Photovoltaic Thermal Water (PVTW) Collector Under Different Loading Of Mass Flow Rate Using ANSYS Fluent. International Journal of Nanoelectronics and Materials, 14 (SI). pp. 467-478. ISSN 1985-5761
Akop, Mohd Zaid and Shehab, Salem Saleh Omar and Mohamed Arifin, Yusmady and Salim, Mohd Azli and Masripan, Nor Azmmi and Abdul Hamid, Nurfaizey and Wasbari, Faizil and Md. Saad, Adzni and Herawan, Safarudin Gazali (2021) An experimental study on effect of light intensity to indoor air temperature and humidity. International Journal of Nanoelectronics and Materials, 14 (SI). pp. 457-466. ISSN 1985-5761
Akop, Mohd Zaid and Jikol, Favian and Salim, Mohd Azli and Mohamed Arifin, Yusmady (2021) A study of steady-state thermal distribution on circular plate using ANSYS. International Journal of Nanoelectronics and Materials, 14 (SI). pp. 479-488. ISSN 1985-5761
Omar, Ghazali and Ahmad, Intan Fatihah and A Hamid, Husna and Salim, Mohd Azli (2021) Effect Of Carbon Nanotube On Microstructure And Hardness Of Sn96.5Ag3.0Cu0.5 Solder For Microelectronic Packaging. International Review of Mechanical Engineering, 15 (7). pp. 346-354. ISSN 1970 - 8734
Mansor, Muhd Ridzuan and Omar, Ghazali and Tamaldin, Noreffendy and Abdul Hamid, Nurfaizey and Md. Saad, Adzni and Arshad, M. A. and Akop, Mohd Zaid and Salim, Mohd Azli and Masripan, Nor Azmmi and Majid, M. H.A. and Maamor, M. A. H. M. and Herawan, S. G. and Solah, M. S. (2021) Implementation Of Dark And Raining Environmental Conditions To Investigate Lane Support System Performance For Passenger Cars In Southeast Asia: Case Study For Malaysian Domestic Road. International Review of Mechanical Engineering, 15 (1). pp. 51-58. ISSN 1970-8734 (In Press)
Salim, Mohd Azli and Mokhlis, Maizura and Masripan, Nor Azmmi and Md. Saad, Adzni and Sudin, Mohd Nizam and Dai, Feng and Naroh, Azmi (2021) Characterisation of mechanical-electrical properties of graphene nanoplatelets filled epoxy as conductive ink. Defence S and T Technical Bulletin, 14 (1). pp. 26-42. ISSN 1985-6571
Salim, Mohd Azli and Md. Saad, Adzni and Ahmad, Fauzi and Hamidi, Roshidah and Ali, Murni and Dai, Feng (2021) Electrical, morphological and surface roughness analysis of silver nanoparticles-filled epoxy conductive ink. Defence S and T Technical Bulletin, 14 (2). pp. 123-134. ISSN 1985-6571
Salim, Mohd Azli and Ab Wahid, Ameeruz Kamal and Masripan, Nor Azmmi and Md. Saad, Adzni and Ali, Murni and Dai, Feng (2021) Measurement of optimal stretchability graphene conductive ink pattern by numerical analysis. Defence S and T Technical Bulletin, 14 (1). pp. 43-54. ISSN 1985-6571
Sheikh Md Fadzullah, Siti Hajar and Masripan, Nor Azmmi and Omar, Ghazali and Mansor, Muhd Ridzuan and Salim, Mohd Azli and Adnan, Zainalfirdaus and Mustafa, Zaleha (2020) Effect Of Hybridization On The Functional Properties Of AgMF–MWCNT-Filled Electrically Conductive Adhesive. Journal of Electronic Materials, 49 (11). pp. 6572-6581. ISSN 0361-5235
Sheikh Md Fadzullah, Siti Hajar and Omar, Ghazali and Salim, Mohd Azli and Mansor, Muhd Ridzuan and Wan Abdul Rahman, Wan Ahmad and Nasaruddin, Muhamad Muaz and Mustafa, Zaleha (2020) The Effect Of Chemical Surface Treatment On Mechanical Performance Of Electrically Conductive Adhesives. Evergreen, 7 (3). 444 - 451. ISSN 2189-0420
Omar, Ghazali and Salim, Mohd Azli and Masripan, Nor Azmmi and A Hamid, Husna and Mohd Yunos, Afiqah (2020) The Influence Of Geometrical Dimensions On Electromechanical Performance In Stretchable Circuit. Journal of Physical Science, 31 (2). pp. 75-89. ISSN 1675-3402
Salim, Mohd Azli and Ab Wahid, Ameeruz Kama and Omar, Ghazali and Masripan, Nor Azmmi and Md. Saad, Adzni and Sudin, Mohd Nizam and Dobrota, Dan and Naroh, Azmi (2020) Driving monitoring system application with stretchable conductive inks: A review. International Journal of Nanoelectronics and Materials, 13 (SI). pp. 327-346. ISSN 1985-5761
Omar, Ghazali and Salim, Mohd Azli and Masripan, Nor Azmmi and Mohd Yunos, Afiqah and Ahmed Al-Mola, Mohammed Hussin (2020) The Effect Of Temperature On The Electrical Conductivity And Microstructure Behaviour Of Silver Particles. International Journal of Nanoelectronics and Materials, 13 (SI). pp. 431-438. ISSN 1985-5761
Wasbari, Faizil and Salim, Mohd Azli and Sukri, Mohamad Firdaus and Gan, Leong Ming and Sukri, Mohamad Firdaus and Mohd Shah, Hairol Nizam and Herawan, Safarudin Gazali (2020) The Effects Of Multiple Energy Storage On The Capacity And Performance Of Hydro-Pneumatic Driveline. International Journal of Nanoelectronics and Materials, 13 (SI). pp. 233-246. ISSN 1985-5761
Salim, Mohd Azli and Md. Saad, Adzni and Rosszainily, Intan Raihan Asni and Wasbari, Faizil and Masripan, Nor Azmmi and Mohd Yusof, Norbazlan and Mohammed Hussin, Ahmed Al-Mola (2020) Evaluation Of Mechanical Properties On Vulcanized SMRCV-60 And ENR-25 Of Flexible-Rigid Body Vibration Isolator. International Journal of Nanoelectronics and Materials, 13 (SI). pp. 449-460. ISSN 1985-5761
Salim, Mohd Azli and Omar, Ghazali and Masripan, Nor Azmmi and Md. Saad, Adzni and Sudin, Mohd Nizam and Mokhlis, Maizura and Caridi, Francesco (2020) Nanoindentation Of Graphene Reinforced Epoxy Resin As A Conductive Ink For Microelectronic Packaging Application. International Journal of Nanoelectronics and Materials, 13 (SI). pp. 407-418. ISSN 1985-5761
Salim, Mohd Azli and Saad, Hartini and Masripan, Nor Azmmi and Md. Saad, Adzni and Dai, Feng (2020) Nanoscale graphene nanoparticles conductive ink mechanical performance based on nanoindentation analysis. International Journal of Nanoelectronics and Materials, 13 (SI). pp. 439-447. ISSN 1985-5761
Salim, Mohd Azli and Omar, Ghazali and Md. Saad, Adzni and Masripan, Nor Azmmi and Akop, Mohd Zaid and Dai, Feng and Dmitriev, Andrey N. and Naroh, Azmi (2020) Prediction effects on internal resonance wave of metallic conductive ink in rotational motion behaviour. International Journal of Nanoelectronics and Materials, 13 (SI). pp. 295-304. ISSN 1985-5761
Salim, Mohd Azli and Ismail, Norhisham and Masripan, Nor Azmmi and Md. Saad, Adzni and Sudin, Mohd Nizam and Naroh, Azmi and Caridi, Francesco (2020) Resistivity Characterization For Carbon Based Conductive Nanocomposite On Polyethylene Terephthalate And Thermoplastic Polyurethane Substrates. International Journal of Nanoelectronics and Materials, 13 (SI). pp. 315-326. ISSN 1985-5761
Omar, Ghazali and Mohd Yunos, Afiqah and Salim, Mohd Azli and Masripan, Nor Azmmi and Cosut, Bunyemin and Mohd Adnan, Ahmad Faris (2020) Temperature dependence on silver conductivity and adhesion performance between silver and flexible substrate. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 73 (2). pp. 73-87. ISSN 2289-7879
Salim, Mohd Azli and Md. Saad, Adzni and Sudin, Mohd Nizam and Rosszainily, Intan Raihan Asni and Dmitriev, Andrey N. (2020) Test load determination on composite standard Malaysian rubber constant viscosity 60 for earthquake isolator. International Journal of Nanoelectronics and Materials, 13 (SI). pp. 347-362. ISSN 1985-5761
Abdul Hamid, Nurfaizey and Salim, Mohd Azli and Tamaldin, Noreffendy and Razali, Nadlene and Kamarolzaman, Anita Akmar and Tucker, Nick (2020) Three-Dimensional Uniaxially Aligned Nanofibre Construct Using Secondary Electrode Assisted Gap Electrospinning. International Journal of Nanoelectronics and Materials, 13 (SI). pp. 177-186. ISSN 1985-5761
Masripan, Nor Azmmi and Salim, Mohd Azli and Omar, Ghazali and Mansor, Muhd Ridzuan and Md. Saad, Adzni and Abdul Hamid, Nurfaizey and Mohamad, Imran Syakir and Dai, Feng (2020) Vegetable oil as bio-lubricant and natural additive in lubrication: a review. International Journal of Nanoelectronics and Materials, 13 (SI). pp. 161-176. ISSN 1985-5761
Salim, Mohd Azli and Omar, Ghazali and Ismail, Norhisham and Md. Saad, Adzni and Masripan, Nor Azmmi and Naroh, Azmi and Donik, Crtomir and Dai, Feng (2020) The behaviour of graphene nanoplatelates thin film for high cyclic fatigue. International Journal of Nanoelectronics and Materials, 13 (SI). pp. 305-314. ISSN 1985-5761
Abdul Hamid, Nurfaizey and Akop, Mohd Zaid and Mohd Rosli, Mohd Afzanizam and Salim, Mohd Azli and Masripan, Nor Azmmi (2020) Controlled Deposition Of Electrospun Nanofibres Using Active Time-Varying Secondary Electrodes. World Journal of Engineering and Technology, 17 (1). pp. 52-59. ISSN 1708-5284
Salim, Mohd Azli and Md. Saad, Adzni and Sudin, Mohd Nizam and Rosszainily, Intan Raihan Asni and Donik, Crtomir and Mohd Yusof, Norbazlan (2020) Investigation of the mechanical properties of standard Malaysian rubber with constant viscosity and epoxidised natural rubber using nano-indentation test. Defence S and T Technical Bulletin, 13 (1). pp. 104-116. ISSN 1985-6571
Masripan, Nor Azmmi and Omar, Ghazali and Salim, Mohd Azli and Mansor, Muhd Ridzuan and Md. Saad, Adzni and Abdul Hamid, Nurfaizey and Mohamad, Imran Syakir and Abdul Rashid, Zulhilmi and Al-Nasrawi, Hayder Saad Oleiwi (2019) Effect Of Load And Temperature On Friction Using Banana Peel Blended With Paraffin Oil Under High Loading Capacity. Journal of Mechanical Engineering and Technology, 11 (2). pp. 24-35. ISSN 2180-1053
Salim, Mohd Azli and Termiti, Zarif Hasif and Md. Saad, Adzni and Omar, Ghazali (2018) Analysis On Stress-Strain Performance Of ABS/PLA Material Used In Geospatial Solution. International Journal Of Advanced Materials Characterization, 1 (1). p. 7. ISSN 2636-9451
Salim, Mohd Azli and Mokhlis, Maizura and Omar, Ghazali and Rahim, N.A.A and Md. Saad, A. (2018) Investigation On Elasticity Rate Of Silver Nano-Particles-Filled Epoxy Conductive Ink. International Journal Of Advanced Materials Characterization, 1 (1). p. 4. ISSN 2636-9451
Salim, Mohd Azli and Mokhlis, M. and Masripan, Nor Azmmi and Md.Saad, Adzni and Omar, Ghazali (2018) Nano Indentation Studies On Graphene Nanoparticles Reinforced Epoxy Resin As Conductive Ink. International Journal Of Advanced Materials Characterization, 1. pp. 8-11. ISSN 2227-3886/2347-1891
Salim, Mohd Azli and Md. Saad, Adzni and Termiti, Zarif Hasif and Omar, Ghazali (2018) Properties Of Graphene And Its Application On Electronic Industries–A Review. International Journal Of Advanced Materials Characterization, 1 (1). p. 7. ISSN 2636-9451
Abdul Munir, Fudhail and Mikami, Masato and Hassan, Muhammad Zahir and Salim, Mohd Azli (2017) Flame Stabilization In Multiple Inlet Channel Meso-Scale Tube Combustors With Wire Mesh. Journal Of Advanced Vehicle System, 4 (1). pp. 20-27. ISSN 2550-2212
Putra, Azma and Squicciarini, Giacomo and Thompson, David J. and Zhang, Xianying and Salim, Mohd Azli (2015) Use of a reciprocity technique to measure the radiation efficiency of a vibrating structure. Applied Acoustics, 89. pp. 107-121. ISSN 0003-682X
Hassan, Muhammad Zahir and Abdul Munir, Fudhail and Salim, Mohd Azli (2015) Design of Chassis Frame for All-Terrain Vehicle for Educational Purposes. Applied Mechanics and Materials , 695. pp. 742-745. ISSN 1662-7482
Hassan, Muhammad Zahir and Abdul Munir, Fudhail and Salim, Mohd Azli (2015) Finite Element Analysis on Brake Disc of an Educational All-Terrain-Vehicle. Applied Mechanics and Materials , 695. pp. 535-538. ISSN 1662-7482
Salim, Mohd Azli and Wan Mohamad, Wan Mohd Farid and Maksom, Zulisman and Kamat, Seri Rahayu and Sukarma, Lukman and Putra, Azma and Abdullah, Mohd Azman (2014) Housing Improvement Using Quality Function Development In Melaka Resident Area:A Case Study. Advanced Review On Scientific Research, 4. p. 13. ISSN 2289-7887
Salim , Mohd Azli and Putra, Azma and Abdullah, Mohd Azman and Ahmad, Nazirah (2014) Development Of Laminated Rubber-Metal Spring Using Standard Malaysia Rubber Constant Viscosity-60. International Review of Mechanical Engineering (I.RE.M.E.), 8. p. 5. ISSN 1970-8734
Salim, Mohd Azli and Abdullah, Mohd Azman and Putra, Azma (2014) Predicted Transmissibility Of An Experimental Approach For A Laminated Rubber-Metal Spring. American-Eurasian Journal of Sustainable Agriculture, 8. p. 7. ISSN 1995-0748
Musthafah, Mohd Tahir and Salim, Mohd Azli and Herawan, Safarudin Gazali and Abu Bakar, Rosli (2014) Feasibility study for energy recovery from internal combustion engine's waste heat. International Review of Mechanical Engineering, 8 (1). pp. 223-227. ISSN 1970-8734
Putra, Azma and Salim, Mohd Azli and ABDULLAH, Mohd Azman (2014) Analysis of Axial Vibration in the Laminated Rubber-Metal Spring. Advanced Materials Research, 845. pp. 46-50. ISSN 1662-8985
Abdullah, Mohd Azman and Salim, Mohd Azli and Putra, Azma (2014) Linear And Angular Displacement Relationship Of Natural Rubber Engine Isolator. Applied Mechanics and Materials, 575 (-). pp. 250-253. ISSN 1660-9336
Putra, Azma and ABDULLAH, Mohd Azman and Salim, Mohd Azli (2014) Linear and Angular Displacement Relationship of Natural Rubber Engine Isolator. Applied Mechanics and Materials. pp. 250-253. ISSN 1660-9336
Salim, Mohd Azli and Putra, Azma and Abdullah, Mohd Azman (2014) Mathematical Formulation For Bending Wave In Non-Dispersive Finite Rod. International Review on Modelling & Simulations, 7 (3). pp. 523-530. ISSN 1974-9821
Putra, Azma and Salim, Mohd Azli and ABDULLAH, Mohd Azman (2014) Mathematical formulation for bending moment wave in non-dispersive finite rod. International Review of Mechanical Engineering. pp. 523-530. ISSN 1970-8734
Putra, Azma and Salim, Mohd Azli and ABDULLAH, Mohd Azman (2014) Predicted Transmissibility of an Experimental Approach for a Laminated Rubber-Metal Spring. American-Eurasian Journal of Sustainable Agriculture, 8 (4). pp. 104-110. ISSN 1995-0748
Putra, Azma and Norfarizan, Siti and Samekto, H and Salim, Mohd Azli (2014) Static Analysis of a Laminated Rubber-Metal Spring Using Finite Element Method. Advanced Materials Research, Vol. 8. pp. 86-90. ISSN 1662-8985
Salim, Mohd Azli and Putra, Azma and ABDULLAH, Mohd Azman and Thompson, David and Ahmad, Nazirah (2013) Transmissibility of a Laminated Rubber-Metal Spring: A Preliminary Study. Applied Mechanics and Materials. pp. 661-666. ISSN 1660-9336
Salim, Mohd Azli and Putra, Azma and Thompson, David J. and Ahmad, Nazirah and Abdullah, Mohd Azman (2013) Transmissibility of a laminated rubber-metal spring: a preliminary study. Applied Mechanics and Materials, 393. pp. 661-665. ISSN 1662-7482
Salim, Mohd Azli and ABDULLAH, Mohd Azman and Noordin, Aminurrashid and Jusoff, Kamarulzaman and Md Zin, Mohd Zarhamdy (2013) Modeling, Simulation and Verification of Parameters Study on Flexible Automotive Wiper. Advanced Science Letters, 19 (1). pp. 106-112. ISSN 1936-6612
Salim, Mohd Azli and Putra, Azma and ABDULLAH, Mohd Azman and Noordin, Aminurrashid and Tee, Boon Tuan (2013) Peak Amplitude Transmission on High-Rise Structure by Implementing TMD Method. Advanced Science Letters, 19 (1). pp. 142-146. ISSN 1936-6612
Salim, Mohd Azli and Noordin, Aminurrashid and ABDULLAH, Mohd Azman (2012) Modeling, Simulation and Validation of Tuned Mass Damper for High Rise Structure with Control Scheme to Suppress Dynamic Unbalance Force. Wulfenia Journal, 19 (8). pp. 298-314. ISSN 1561-882X
Salim, Mohd Azli and Abd Munir, Fudhail and Noordin, Aminurrashid (2012) Experimental Study on Vibration Level of Automotive Flexibel Wiper System. Journal of Engineering and Technology, 3. pp. 123-138. ISSN 2180-3811
Salim, Mohd Azli and Noordin, Aminurrashid (2012) A Study of the Mode Shape Effect in Automobile Braking System. International Review of Mechanical Engineering, 6 (4). pp. 719-723. ISSN 1970-8742
Salim, Mohd Azli and Abd Munir, Fudhail and Abdul Halim , Nur Baiduri (2012) Development an Experimental Rig of High Rise Building to Suppress a Vertical Vibration during Earthquake Phenomena. International Review of Civil Engineering , 3 (2). pp. 111-119. ISSN 2036-9913
Salim, Mohd Azli and Noordin, Aminurrashid and Akop, Mohd Zaid (2011) Development of a Free-Free Transverse Beam Model Using Lateral Vibrations of Beam Conventional Method during Seismic Activity. Journal of Mathematics Research, 3 (3). pp. 77-82. ISSN 1916-9795
Mat, Shafizal and Salim, Mohd Azli (2011) The Performance Improvement for Plenum Inside Intake Manifold in Automotive Vehicles Engine. Journal of Electrical and Mechanical Engineering, 2 (1). pp. 13-20. ISSN 2010-1635
Salim, Mohd Azli and Noordin, Aminurrashid and Abdul Munir, Fudhail (2011) Development of Low Cost High Rise Building using Austenitic-Ferritic Material in Nano-Scale Environmental Challenges to Sustain a Green. International Review of Mechanical Engineering, 5 (4). pp. 784-791. ISSN 1970-8734
Salim, Mohd Azli and Noordin, Aminurrashid and Mohamad Zin, Mohd Rody and Karjanto, Juffrizal (2011) The New Generation of Building Control Concept to Suppress the Horizontal Vibration during the Earthquake. Australian Journal of Basic and Applied Sciences, 5 (4). pp. 16-25. ISSN 1991-8178
Salim, Mohd Azli and Noordin, Aminurrashid and Abdul Munir , Fudhail (2011) PID Controller for Vibration Reduction and Performance Improvement of Handheld Tools. International Journal of Mechanical and Mechatronics Engineering, 11 (2). pp. 7-16. ISSN 2077-124X
Salim, Mohd Azli and Nordin, Aminurrashid (2011) Dynamic Response on Free-Free Beam in Driving Point and Transfer Mobility Measurement under Bending Load. Journal of Civil Engineering and Architecture, 5 (3). pp. 248-257. ISSN 1934-7359
Mat, Shafizal and Salim, Mohd Azli and Wan Mohd Farid , Wan Mohamad and Md. Saifuddin, Md Yusop (2011) Design and Ergonomics Analysis of Cutter Machine Locking Device in Aerospace Industry. Journal of Materials Science and Engineering, 5 (2). pp. 145-154. ISSN 1934-8959
Salim, Mohd Azli and Noordin, Aminurrashid (2011) Implementation of Active Force Control to Reduce Vibration Displacement in Active Mass Damper during Seismic Activity. Journal of Instrument, 2 (1). pp. 1-10. ISSN 2010-1856
Salim, Mohd Azli (2011) Mathematical Modeling of Structural Integrity on High Rise Building Using Parallel Axis Theorem and Finite Element Analysis. International Journal of Physical and Mathematical Sciences, 2 (1). pp. 73-82. ISSN 2010-1791
Salim, Mohd Azli and Abdul Munir, Fudhail and Razali, Nadlene and Mat Nuri, Nur Rashid and Mohamad Zin, Mohd Rody (2011) Preliminary Study - Analytical Approach in Experimental Rig of Automotive Flexible Wiper System. International Journal of Physical and Mathematical Sciences, 2 (1). pp. 64-72. ISSN 2010-1791
Mat, Shafizal and Salim, Mohd Azli and Mahmud, Jamaluddin and Saedon, Juri (2009) The Development Of Computational Model Through Reverse Engineering : Side Mirror Case Study. Journal Of Mechanical And Engineering Technology, 1 (1). pp. 25-41. ISSN 2180-1053
Book Chapter
Salim, Mohd Azli and Hosnie, Aina Natasha and Md. Saad, Adzni (2022) Percolation threshold in graphene conductive ink filled epoxy resin. In: Advanced approach for future technology. Penerbit UTeM Press, Durian Tunggal, Melaka, pp. 1-19. ISBN 9789672454465
Md. Saad, Adzni and Ahmad, Fauzi and Salim, Mohd Azli (2022) Potential control approch of electronic wedge brake system. In: Advanced approach for future technology. Penerbit UTeM Press, Durian Tunggal, Melaka, pp. 21-35. ISBN 9789672454465
Mansor, Muhd Ridzuan and Akop, Mohd Zaid and Sapuan, S.M. and Mohd Tahir, Musthafah and Salim, Mohd Azli and Shaharuzaman, Mohd Adrinata (2006) Concurrent Design Of Green Composites. In: Green Approaches To Biocomposite Materials Science And Engineering. IGI Global, pp. 48-51. ISBN 9781522504245
Conference or Workshop Item
Samranmak, Pongsiri and Salim, Mohd Azli and Photong, Chonlatee (2023) Effects of electric motor speed and direction of a horizontal rotary dyeing machine on indigo dyeing quality and performances. In: 2023 International Conference on Power, Energy and Innovations, ICPEI 2023, 18 October 2023through 20 October 2023, Phrachuap Khirikhan.
Tangdee, Patsakorn and Uthathip, Narongkorn and Thongsan, Taweesak and Lertlam, Krit and Salim, Mohd Azli and Photong, Chonlatee (2023) An improved sun drying for andrographis paniculata using PTFE with exhaust revolutionary air system. In: 2023 International Electrical Engineering Congress, iEECON 2023, 8 March 2023through 10 March 2023, Krabi.
Salim, Mohd Azli and Noordin, Aminurrashid and Mansor, Muhd Ridzuan (2012) A PRELIMINARY STUDY OF LOWER SIDE BEAM STRUCTURE ON LONGITUDINAL BRIDGE MODEL. In: 3rd International Conference on Engineering and ICT (ICEI2012), 2012, Mahkota Hotel, Melaka.
Jamaludin, Mohd Zaini and Abdul Kudus, Syahibudil Ikhwan and Mohd Rosli, Mohd Afzanizam and Salim, Mohd Azli (2012) Design And Manufacturing Of Formula Varsity Race Car Pedal System. In: 3rd International Conference on Engineering & ICT (ICEI 2012) , 4-6 April 2012, Mahkota Hotel, Melaka. (Submitted)
Suhaimi, Khalis and Mansor, Muhd Ridzuan and Mohd Rosli, Mohd Afzanizam and Abdul Kudus, Syahibudil Ikhwan and Salim, Mohd Azli and Shaharuzaman, Mohd Adrinata (2012) Design Of Formula Varsity Race Car Suspension Upright. In: 3rd International Conference on Engineering & ICT (ICEI2012) , 4-6 April 2012, Mahkota Hotel, Melaka. (Submitted)
Ashari, Muhamad Hafizullah and Mansor, Muhd Ridzuan and Mohd Rosli, Mohd Afzanizam and Akop, Mohd Zaid and Salim, Mohd Azli and Shaharuzaman, Mohd Adrinata (2012) Design Of Space Frame Chassis For UTeM Formula Varsity Race Car. In: 3rd International Conference on Engineering & ICT (ICEI2012) , 4-6 April 2012, Mahkota Hotel, Melaka. (Submitted)
Salim, Mohd Azli and Noordin, Aminurrashid and Mohamad Sapiee, Mohd Razali and Che Hasan, Mohd Hanif and Sabikan, Sulaiman and Othman, Mohd Hafifi (2012) Development Of A Quadruped Crawling Robot Prototype. In: 3rd International Conference on Engineering and ICT (ICEI2012).
Salim, Mohd Azli and Noordin, Aminurrashid and Abd Munir, Fudhail and Mat Nuri, Nur Rashid (2012) The Relationship of Contact Angle and Input Shaping Scheme in Automotive Wiper System. In: 2012 IEEE RIVF International Conference on Computing & Communication Technologies, Research, Innovation, and Vision for the Future, March 2012, Ho Chi Minh City, Vietnam.
Abdul Munir, Fudhail and Mat Nuri @ Md Din, Nur Rashid and Mohd Azmi, Mohd Irwan and Salim, Mohd Azli and Hasnan, Mohd Yazid (2011) Preliminary Studies of Air flow around Vehicle Front Windscreen. In: THE 4TH INTERNATIONAL MEETING OF ADVANCES IN THERMOFLUIDS (IMAT 2011), 3 - 4 OKTOBER 2011, MELAKA, MALAYSIA.
Thesis
Salim, Mohd Azli (2016) Study Of Transmissibility Of Laminated Rubber-Metal Spring. Doctoral thesis, Universiti Teknikal Malaysia Melaka.
Technical Report
Omar, Ghazali and Samsudin, Zambri and Nordin, Mohd Nur Azmi and Kamarolzaman, Anita Akmar and Masripan, Nor Azmmi and Salim, Mohd Azli and Mansor, Muhd Ridzuan and Wu, Jonathan Wei Ping (2019) An Investigation Of Superhydrophobic Waterproofing For Electronic Assembly. [Technical Report] (Submitted)
Salim, Mohd Azli and Wasbari, Faizil and Mohd Rosli, Mohd Afzanizam (2019) Tempe Processing Machine. [Technical Report] (Submitted)