Items where Division is "Faculty Of Industrial And Manufacturing Technology And Engineering" and Year is 2024

A

Abd Rashid, Mohd Warikh and Azlan, Umar Al-Amani and Shamsuri, Siti Rahmah and Mohamad Dom, Adibah Haneem and Azman, Muhd. Afiq Hafizuddin and Kasim, Shah Rizal and Mat Harttar@Mohd Hatta, Maziati Akmal (2024) Effect of manganese dopant on the structure and electrical properties of potassium sodium niobate thin film. Malaysian Journal of Microscopy, 20 (1). pp. 317-327. ISSN 2600-7444

Abdul Ghani, Annisa Ummihusna and Hussain, Afifuddin Husairi and Wahi, Wahiza and Eni, Sabariah and Mohamed Sultan, Al Amin (2024) Droneducation: Empowering tomorrow's workforce through IR4.0-based curriculum. International Journal of Academic Research In Business And Social Sciences, 14 (1). pp. 1671-1684. ISSN 2222-6990

Abdul Kudus, Syahibudil Ikhwan and Syah Lubis, Abdul Munir Hidayat and Amran, Ammar Syafi and Mustafa, Nuzaimah and Mohammad Taha, Mastura and Shaharuzaman, Mohd Adrinata (2024) Flow analysis and shear rate comparison of counter-rotating and co-rotating intermeshing twin-screw extruders for filament extrusion of polypropylene-based biocomposites. Pertanika Journal of Science and Technology, 32 (S2). pp. 1-20. ISSN 0128-7680

Ahmad, Mohd Riduan and Shamsul Baharin, Shamsul Ammar and Mohammad Sabri, Muhammad Haziq and Cooray, Vernon (2024) Very high frequency radiation emitted by negative narrow bipolar events occurred over Malacca strait. Journal of Atmospheric and Solar-Terrestrial Physics, 259. 01-07. ISSN 1364-6826

Ali, Mohd Basri and Zainuddin, Hikmah and Zakaria, Kamarul Ariffin and Paijan, Lailatul Harina and Mamat, Mohd Fauzi and Abu Bakar, Mohd Hadzley (2024) Investigation of impact properties under instrumented Charpy test. Journal of Engineering and Technological Sciences, 56 (3). pp. 329-339. ISSN 2337-5779

G

Ghazali, Ihwan and Dwi Aryanti and Abdullah Ali and Ridwan Usman and Sri Mumpuni Ngesti Rahaju (2024) Sustainable and green architecture industrial technology: Challenges and future directions. Engineering Science Letter, 03 (3). pp. 79-85. ISSN 2961-872X

Ghazali, Ihwan and Novita Sakundarini (2024) E-waste recycling and why it is important. Bincang Sains dan Teknologi (BST), 3 (1). pp. 19-24. ISSN 2961-8746

Ghazali, Ihwan and Tanjung, Tia and Semiun, Nasri (2024) Culturally-informed for designing motorcycle fire rescue: Empirical study in developing country. AIP Advances, 14 (6). 065222-1. ISSN 2158-3226

Ghazali, Ihwan and Tanjung, Tia and Semiun, Nasri (2024) Culturally-informed for designing motorcycle fire rescue: Empirical study in developing country. AIP Advances, 14 (6). ISSN 2158-3226

H

Halim, Isa and Abdullah, Zulkeflee and Mahadzir, Muhammad Nadzirul Izzat and Zainal Abidin, Muhammad Zaimi and Md Ghazaly, Mariam and Adi, Saptari (2024) Design and evaluation of single-stand chairless exoskeleton for standing and sitting tasks. Journal of Engineering Science and Technology, 19 (1). 298 - 316. ISSN 1823-4690

Hamzah, Khairum and Waini, Iskandar and Mohd Nordin, Muhammad Haziq Iqmal and Nik Long, Nik Mohd Asri and Sayed Nordin, Sayed Kushairi and Khashi’ie, Najiyah Safwa and Zainal, Nurul Amira (2024) Stress intensity factors for thermoelectric bonded materials weakened by an inclined crack. Journal of Advanced Research in Applied Mechanics, 113 (1). pp. 52-62. ISSN 2289-7895

J

Jumaidin, Ridhwan and Gazari, Ainin Sofiya and Kamaruddin, Zatil Hafila and Kamaruddin, Zatil Hazrati and Zakaria, Nazri Huzaimi and Abdul Kudus, Syahibudil Ikhwan and Yob, Mohd Shukri and Abd Munir, Fudhail and Keshavarz, Meysam (2024) Mechanical properties of thermoplastic cassava starch/ coconut fibre composites: Effect of fibre size. Pertanika Journal of Science and Technology, 32 (S2). pp. 91-113. ISSN 0128-7680

K

Kadirgama, Kumaran and Subramonian, Sivarao and Salleh, Mohd Shukor and Lee, Sara Kit Yee and Ramasamy, Devarajan and Mohamed Kassim, Anuar and U. K. Vatesh and Satish, Pujari and Dharsyanth R. (2024) Advancements in additive manufacturing: Innovations in direct ink writing materials and their transformative practical applications. Journal of Engineering Science and Technology, 19 (1). pp. 246-275. ISSN 1823-4690

Kamat, Seri Rahayu and Ibrahim, Muhammad Shafiq and Fukumi, Minoru (2024) Regression analysis of heart rate for driving fatigue using Box-Behnken design. Journal of Mechanical Engineering, 21 (1). pp. 163-176. ISSN 1823-5514

Kok, Chee Kuang and Jazayerli, Moumen Mahmoud and Por, Kia Wang and Liew, Kia Wai and Sued, Mohammad Kamil and Ooi, Chin Chin (2024) Effect of welding speed on micro-friction stir lap welding of ultra-thin aluminium and copper sheets. Welding in the World, 68. pp. 1853-1867. ISSN 0043-2288

L

Lau, Kok Tee and Sorrell, Charles Chris (2024) Effect of electrophoretic deposition parameters on coating thickness and deposit yield of non-colloidal graphite particles. Jurnal Teknologi, 86 (1). pp. 203-211. ISSN 0127-9696

M

Maidin, Shajahan and Mohd Ali, Latifah and Kamarudin, Mohd Fauzi and Ismail, Shafinaz (2024) Issues and challenges of primary education toward implementing technical and vocational education training to meet the fourth industrial revolution demand: A systematic literature review. Pertanika Journal of Social Sciences and Humanities, 32 (2). pp. 487-518. ISSN 0128-7702

Maidin, Shajahan and Rajendran, Thavinnesh Kumar and Sharum, Mohd Afiq and Ismail, Shafinaz (2024) Embedded components design strategy framework for fused deposition modeling system. Engineering Research Express, 6 (3). pp. 1-14. ISSN 2631-8695

Mohd Abid, Mohd Asyadi 'Azam and Kosnan, Muhammad Akmal and Munawar, Rose Farahiyan and Tee, Chee Yin and Mohd Halim, Nurhaliana Shazwani and Klimkowicz, Alicja and Takasaki, Akito (2024) X-ray diffraction and photoelectron spectroscopy analyses of MXene electrode material used in energy storage applications - a review. Materialpruefung/Materials Testing, 66. pp. 1-26. ISSN 0025-5300

Mohd Abid, Mohd Asyadi 'Azam and Munawar, Rose Farahiyan and Kosnan, Muhammad Akmal and Takasaki, Akito (2024) Structural, morphological, and electrochemical properties of MXene/MoS2-based supercapacitor. International Journal of Nanoelectronics and Materials, 17. pp. 263-273. ISSN 1985-5761

Mohd Abid, Mohd Asyadi 'Azam and Safie, Nur Ezyanie and Arith, Faiz and Thangaraj, Joseph Sahaya Anand and Mohamad, Najmiah Radiah and Takasaki, Akito and UNSPECIFIED (2024) Electrical conductivity enhancement of rGO-MoS2 composite electrode for inverted PSC by parameter optimization. Results in Engineering, 22 (102237). pp. 1-11. ISSN 2590-1230

Mohd Suan, Mohd Shahadan and Lukman, Zainul Abidin and Nurdin, Irwan (2024) Characterization of black phosphorous synthesized via ball-milling technique for the effect of milling media and time. Journal of Advanced Research in Micro and Nano Engineering, 18 (1). pp. 113-122. ISSN 2756-8210

Mohd Yussoff, Nurul Hajar and Nurul ‘Aini and Shapiee, Norrlaili and Rivaie, Mohd and Samsudin, Adam and Hussin, Nor Hafizah and Hairol Anuar, Siti Haryanti (2024) The application of conjugate gradient methods to optimize 3D printed parameters. Journal of Advanced Research in Applied Mechanics, 120 (1). pp. 136-141. ISSN 2289-7895

Mustafa, Zaleha and Chang, Siang Yee and Mohammad Sappa, Amirah Ain Asyiqin and Sheikh Md Fadzullah, Siti Hajar and Ahsan, Qumrul (2024) Effect of holding time during hot compression moulding on mechanical performance of poly(3-hydroxybutyrate-co-3-hydroxyvalerate). Journal of Advanced Manufacturing Technology (JAMT), 18 (2). pp. 17-29. ISSN 2289-8107

N

Nguyen, Huu Tho and Nguyen, Thi Thao Uyen and Nguyen, Vu Anh Duy and Ghazali, Ihwan (2024) Development of a hybrid decision support system for selecting the air filters based on multiple criteria. Engineering Science Letter, 03 (2). pp. 55-61. ISSN 2961-872X

O

Omar, Mohd Zaidi and Salleh, Mohd Shukor and Wakhi Anuar, Nur Farah Bazilah and W. Zamr, Wan Fathul Hakim and Md Ali, Afifah (2024) Effect of graphene addition on microstructure and wear behaviour of the A356-based composite fabricated by thixoforming process. Journal of Materials Research and Technology, 30. pp. 4813-4831. ISSN 2238-7854

P

Paijan, Lailatul Harina and Mamat, Mohd Fauzi and Abu Bakar, Mohd Hadzley and Abd Aziz, Mohd Syafiq (2024) Influence of thermal input on microstructure and wear properties of surface alloyed DSS with SiC by TIG melting techniques. Malaysian Journal of Microscopy, 20 (1). pp. 123-133. ISSN 1823-7010

R

Rajendran, Thavinnesh Kumar and Sharum, Mohd Afiq and Maidin, Shajahan and Ismail, Shafinaz (2024) Investigation of oil palmfiber reinforced polylactic acid composite extruded filament quality. Engineering Research Express, 6 (3). pp. 1-10. ISSN 2631-8695

Ramli, Rizauddin and Amiri, Mohammad Soleimani (2024) Admittance swarm-based adaptive controller for lower limb exoskeleton with gait trajectory shaping. Journal of King Saud University - Computer and Information Sciences, 36 (1). pp. 1-13. ISSN 1319-1578

S

Solikhah, Efa Wakhidatus and Asihi, Hayati Mukt and Astuti, Fatma Hermining and Ghazali, Ihwan and Mohamad, Effendi (2024) Industry 4.0 readiness trends: A bibliometric and visualization analysis. International Journal of Robotics and Control Systems, 04 (1). pp. 105-124. ISSN 2775-2658

Subramonian, Sivarao and Karunamurthi, Lavanyaa and Lee, Sara Kit Yee and Kadirgama, Kumaran and Arep @ Ariff, Hambali and Rao, Dharsyanth and Salleh, Mohd Shukor and Ramasamy, Devarajan (2024) TRIZ and Pugh method analysis towards Conceptualizing a novel modular airless tyre. International Review of Mechanical Engineering, 18 (2). pp. 54-62. ISSN 1970 - 8734

Subramonian, Sivarao and Samylingam, Lingenthiran and Kok, Chee Kuang and Liew, Kia Wai and Aslfattahi, Navid and Schmirler, Michal and Kadirgama, Kumaran and Ramasamy, Devarajan and Wan Harun, Wan Sharuzi and Samykano, Mahendran and Sazali, Norazlianie and Veerendra, Arigela Satya and Semin (2024) Enhancing lubrication efficiency and wear resistance in mechanical systems through the application of nanofluids: A comprehensive review. Journal of Advanced Research in Micro and Nano Engineering, 16 (1). pp. 1-18. ISSN 2756-8210

Subramonian, Sivarao and Zurghiba, Hizarhuda and Kadirgama, Kumaran and Sazali, Norazlianie and Mat Noor, Muhammad and Abu Bakar, Rosli and Yusaf, Talal and Alsalman, Ali and Chong, Tak Yaw and Koh, Siaw Paw and Tiong, Sieh Kiong and Benedict, Foo (2024) Exploring the potentials of Copper Oxide and CNC Nanocoolants. Journal Of Advanced Research In Applied Sciences And Engineering Technology, 34 (2). pp. 315-326. ISSN 2462-1943

W

Wakhi Anuar, Nur Farah Bazilah and Omar, Mohd Zaidi and Salleh, Mohd Shukor and WWan Zamri, Wan Fathul Hakim and Md Ali, Afifah (2024) Effect of short heat treatments on the microstructural evolution and hardness of thixoformed graphene reinforced aluminium composites (Kesan rawatan haba singkat terhadap evolusi mikrostruktur dan kekerasan komposit aluminium diperkuat grafen pembentukan tikso). Sains Malaysiana, 53 (3). pp. 705-717. ISSN 0126-6039

Wan Mahmood, Wan Hasrulnizzam and Mohd, Intan Bazliah and Yusup, Muhamad Zaki (2024) Lean hierarchical function deployment for: Project-based production line. Penerbit UTeM Press, Durian Tunggal, Melaka. ISBN 9789672792987

Wan Mahmood, Wan Hasrulnizzam and YAAKOB, MOHD YUHAZRI and Tukimin, Rahayu and Mohamed, Norhafiza (2024) Green supplier development for manufacturing industry. Penerbit UTeM Press, Durian Tunggal, Melaka. ISBN 9789672792932

Y

Yusuf, Yusliza and Mustafa, Nuzaimah and Yusof, Yusra Fitri and Sulistyarini, Dwi Hadi (2024) The mechanical and physical properties of 3D printing filament made from recycled polypropylene and ground tyre rubber treated with alkali. Pertanika Journal of Science and Technology, 32 (S2). pp. 151-163. ISSN 0128-7680

Z

Zainuddin, Hikmah and Ali, Mohd Basri (2024) Impact energy in heat-treated aluminium alloy 6061 and 7075. ARPN Journal Of Engineering And Applied Sciences, 19 (8). pp. 473-478. ISSN 1819-6608