Items where Division is "Faculty Of Industrial And Manufacturing Technology And Engineering" and Year is 2025

A

Abdul Rasib, Amir Hamzah and Abdullah, Rohana and Wahyono, F. F.Zubaidi and Ramli, Mohd Irman (2025) Enhancing manufacturing efficiency: A case study on automotive assembly line balancing techniques for improving production capacity. Journal of Engineering Science and Technology, 20 (2). pp. 427-441. ISSN 1823-4690

Abdullah, Rohana and Pang, Chang Tze and Hafizh, Hadyan and Abdul Rasib, Amir Hamzah and Mansour, Mohamed (2025) Part detection model for aerospace manufacturing quality control using convolutional neural networks. Journal of Advanced Research Design, 133 (1). pp. 1-10. ISSN 2289-7984

Ahmad, Mohd Nazri and Ishak, Mohamad Ridzwan and Maidin, Nurul Ain and Saharudin, Mohd Shahneel (2025) Water absorption analysis of oil palm fibre reinforced acrylonitrile butadiene styrene composites by fick's law. Journal of Advanced Research in Experimental Fluid Mechanics and Heat Transfer, 20 (1). pp. 150-158. ISSN 2756-8202

Ahmad, Nadiah and Radin Umar, Zaid @ Radin Zaid and Halim, Isa and Safitri, Dian Mardi (2025) Sheet metal manual handling aids: Effects of design differences on muscle activity and subjective assessment. IIUM Engineering Journal, Special Issue in Mechanical Engineering, 26 (1). pp. 480-494. ISSN 1511-788X

Ahmad Sobri, Sharizal and Norizan, Mohd Natashah and Sobri, Mohd Sharizal and Hermawan, Andi and Mohamad Amini, Mohd Hazim and Mohamed, Mazlan and Wan Ismail, Wan Omar Ali Saifuddin and Mohamed Sultan, Al Amin (2025) The influence of laser cutting parameters on the heat-affected zone in fast-growing Malaysian wood species. Drones, 1 (28). pp. 8073-8081. ISSN 2504-4494

G

Ghazali, Ihwan and Tanjung, Tia and Al Humdan, Eias and Wan Mahmood, Wan Hasrulnizzam and Herawan, Safarudin Gazali and Sari, Wangi Pandan (2025) Cultural influences on lean manufacturing and productivity: Evidence from Malaysia. Results in Engineering, 28 (107500). pp. 1-11. ISSN 2590-1230

Ghazali, Ihwan and Wan Mahmood, Wan Hasrulnizzam and Tanjung, Tia and Herawan, Safarudin Gazali (2025) Drivers and barriers to Industrial Revolution 5.0 readiness: A comprehensive review of key factors. GREEN TECHNOLOGIES AND SUSTAINABILITY, 3 (100217). pp. 1-9. ISSN 2949-7361

H

Halim, Isa and Mahadzir, Muhammad Nadzirul Izzat and Abdullah, Zulkeflee and Mafazi, Nurul Wirdah and Kasim, Mohd Shahir and Saptari, Adi (2025) A regression model of hip flexion force of the dominant leg among Malaysian adults in standing posture. Malaysian Journal of Medicine and Health Sciences, 21 (1). pp. 91-102. ISSN 1675-8544

Halim, Isa and Mahadzir, Muhammad Nadzirul Izzat and Abdullah, Zulkeflee and Mohamed Sidek, Muhammad Haikal and Md Ghazaly, Mariam and Saptari, Adi (2025) Development and evaluation of passive exoskeleton (SolatExo) for assisting Muslims with physical disability in Salah. IUM Engineering Journal, 26 (1). pp. 495-523. ISSN 1511-788X

Hashim, Hanizam and Mazli, Nur Hisyam Afandi and Ramli, Mohd Irman and Abdul Rasib, Amir Hamzah and Baba, Nor Bahiyah (2025) Experimental investigation of delamination damage for glass fiber-reinforced polymer composite during abrasive waterjet machining. Journal Of Engineering Science And Technology, 20 (1). pp. 313-323. ISSN 1823-4690

L

Liew, Pay Jun and Chong, Jun Hong and Subramonian, Sivarao and Manap, Abreeza and Anand, T. Joseph Sahaya (2025) Development and characterization of electrical discharge coating electrode through powder metallurgy process. Journal of Advanced Research in Micro and Nano Engineering, 29 (1). pp. 104-113. ISSN 2756-8210

M

Maidin, Shajahan and Hasan, Jufri Hanini (2025) Design and 3d printing of origami structure. Penerbit UTeM Press, Durian Tunggal, Melaka. ISBN 9786297658247

Mohamad, Effendi and Faishal, Muhammad and Asih, Hayati Mukti and Abdul Rahman, Azrul Azwan and Johanuar, T. and Adiyanto, Okka (2025) Halal principle and operational performance of MSMEs industries: Mediating role of lean six sigma and sustainability. Journal of Advanced Manufacturing Technology (JAMT), 19 (1). pp. 81-98. ISSN 1985-3157

Mohamed Sultan, Al Amin and Azmi, Fadhlur Rahim and Alghamdi, Ahmed S. and Ahmad Sobri, Sharizal and Mohd Sukri, Nursyahwani (2025) Operational supply risks of halal food manufacturer: A mitigation approach to supply chain risks. Decision Science Letters, 14 (1). pp. 47-62. ISSN 1929-5812

Mohamed Sultan, Al Amin and Faradillah, Pursatul and Samat, Khairul Fadzli and Kamarulzaman, Thahirah (2025) Strengthening e-waste governance: A decision framework for sustainable transboundary movements under the Swiss-Ghana Amendments. Chinese Journal of Population, Resources and Environment, 23. pp. 310-323. ISSN 2096-9589

Mohamed Sultan, Al Amin and Ismail, Erwan and Md Saad, Mohd Shamsuri and Husain, Afifuddin Husairi and Daud, Muhammad Zaid and M.Alswat, Haitham (2025) Impact of social media on higher education: Academic performance, leadership and co-curricular activity engagement. Multidisciplinary Reviews, 8 (5). pp. 1-10. ISSN 2595-3982

O

Othman, Intan Sharhida and Munawar, Rose Farahiyan and Liew, Pay Jun and Mohd Abid, Mohd Asyadi Azam and Abd Razak, Jeefferie and Sundi @ Suandi, Syahrul Azwan and Kamis, Shahira Liza and Alhamoudi, Fahad Hussain (2025) Wear behaviour of nickel coatings reinforced by recycled quarry dust: Influence of current density. Journal of Advanced Research in Micro and Nano Engineering, 27 (1). pp. 1-11. ISSN 2756-8210

P

Paijan, Lailatul Harina and Shamsuri, Alin Qistina and Mohd Rosli, Zulkifli and Abu Bakar, Mohd Hadzley and Mamat, Mohd Fauzi and Shaharuddin, Ahmad Shihan (2025) Microstructural characterization and wear properties of steel surface composite coating with TiC nanoparticles through GTAW arcing techniques. Malaysian Journal of Microscopy, 21 (1). pp. 23-33. ISSN 1823-7010

R

Ramli, Rizauddin and Amiri, Mohammad Soleimani and Van, Mien (2025) Swarm-initialized adaptive controller with beetle antenna searching of wearable lower limb exoskeleton for sit-to-stand and walking motions. ISA Transactions, 158. pp. 640-653. ISSN 0019-0578

S

Salleh, Mohd Shukor and Abd Rahim, Mohammad Na’aim and Yahaya, Saifudin Hafiz and Subramonian, Sivarao and Abdul Rashid, Azrin Hani and Syed Ahmad, Syarifah Nur Aqida and Al-Zubaidi, Salah Salman (2025) Microstructural investigation and mechanical properties of Al2O3-MWCNTs reinforced aluminium composite. AIMS Materials Science, 12 (2). pp. 318-335. ISSN 2372-0484

Shamsuddin, Syamimi and Ho, Jia Xin and Kamat, Seri Rahayu and Ibrahim, Muhammad Shafiq and Setiawan, Rudi (2025) Investigation on factors affecting cognitive skills in detection of driving fatigue. Journal of Advanced Research in Applied Sciences and Engineering Technology, 51 (2). pp. 270-280. ISSN 2462-1943

T

Toan, Nguyen Van and Jianghan, Tian and Keit, Sakakibara and Thi Kim Tuoi, Truong and Samat, Khairul Fadzli and Dang Khoa Tran, Ngoc and Van Hieu, Nguyen and Ono, Takahito (2025) Enhanced thermoelectric performance of electrochemically deposited cellulose nanofiber-bismuth telluride nanocomposite. Journal of The Electrochemical Society, 172 (4). 043501. ISSN 0013-4651

W

Waini, Iskandar and Hamzah, Khairum and Khashi’ie, Najiyah Safwa and Zainal, Nurul Amira and Mohd Kasim, Abdul Rahman and Ishak, Anuar and Pop, Ioan (2025) Stability analysis on reiner-phillippoff hybrid nanofluid flow over a wedge. JP Journal of Heat and Mass Transfer, 38 (1). pp. 77-94. ISSN 0973-5763

Wan Mahmood, Wan Hasrulnizzam (2025) Towards lean thinking. Penerbit UTeM Press, Durian Tunggal, Melaka. ISBN 9786297784113

Y

Yahaya, Saifudin Hafiz and Mahdzir, Mira Mazlina and Md Fauadi, Muhammad Hafidz Fazli and Tneh, Tze Yeow (2025) Integrating water quality model and aeration with IoT technology in water quality management: A conceptual framework. Multidisciplinary Science Journal, 7 (3). pp. 1-10. ISSN 2675-1240

Yusuf, Yusliza and Tee, Kuo Chun and Wakhi Anuar, Nur Farah Bazilah and Abd Rahim, Toibah and Mustafa, Nuzaimah and Omar, Nooririnah and Che Daud, Zuraidawani and Dwi Hadi, Sulistyarini and Jatmiko, Hapsoro Agung (2025) Investigation of the microstructure and mechanical properties of quenching AZ31B in GO nano-fluid. Journal of Advanced Research in Micro and Nano Engineering, 36 (1). pp. 118-131. ISSN 2756-8210