Items where Division is "Faculty of Engineering Technology" and Year is 2018

Ab Aziz, Ab Wafi and Rahim, Norain and Mohd Tumari, Mohd Zaidi and Abdul Kadir, Ahmad Muzaffar and Abd Rashid, Wan Norhisyam and Ainol Bakri, Ainol Sheqal (2018) Experimental Study On Efficiency Of DC And AC Power Supply Travel Kit Using Solar Panel. Journal Of Telecommunication Electronic And Computer Engineering (JTEC), 10. pp. 105-109. ISSN 2289-8131

Ab Aziz, Ab Wafi and Ghazali, Rozaimi and Chong, Chee Soon and Saadon, Intan Mastura and Omar, Mohd Firdaus and Aripin, Muhamad Khairi (2018) Robust Direct Yaw Moment For Optimal Control Using PSO In Step Steering Manoeuvre. International Journal Of Mechanical Engineering And Technology (IJMET), 9 (11). pp. 1789-1798. ISSN 0976-6340

Ab Hadi, Nik Azran and A. Subki, A. Shamsul Rahimi and Abd Rashid, Wan Norhisyam and Jidin, Aiman Zakwan and Tan, Sze Ying (2018) Development Of Portable Air Conditioning Using Peltier Effect For Small Area Uses. Journal Of Telecommunication Electronic And Computer Engineering (JTEC), 10. pp. 99-103. ISSN 2289-8131

Ab Hadi, Nik Azran and Kadmin, Ahmad Fauzan and A Aziz, Khairul Azha and Abd Rahman, Mohd Soufhwee and Abd Razak, S. S. and Salehan, M. Z. and Abdul Hadi, N. A. and Hamzah, Rostam Affendi and Abd Rashid, Wan Norhisyam (2018) Performance Analysis Of Neural Network Model For Automated Visual Inspection With Robotic Arm Controller System. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 10. pp. 19-22. ISSN 2180-1843

Ab Hadi, Nik Azran and Manimaran, Vasantha Kumaran and Mohd Annuar, Khalil Azha and Harun, Mohamad Haniff and Mohd Ab Halim, Mohd Firdaus and Mohamad Sapiee, Mohd Razali (2018) Development Of Smart Home System Using Arduino With Mobile Application. Journal In Engineering,Sciences And Technology, 1. pp. 1-10. ISSN 2215-0986

Ab Hadi, Nik Azran and Mohd Annuar, Khalil Azha and Mohammad Azmi, Mohamad Azim and Salleh, Azahari and Mohd Ab Halim, Mohd Firdaus and Abd Rashid, Wan Norhisyam and Mohd Noh, Mohd Syahrin Amri (2018) Investigating The Power Quality Improvement On Laboratories Equipment Base On Voltage And Current Analysis. Journal Of Advanced Research In Dynamical And Control Systems, 10-spe. pp. 1409-1422. ISSN 2180-1843

Ab Hadi, Nik Azran and Mohd Annuar , Khalil Azha and Harun , Mohamad Haniff and Mohd Ab. Halim, Mohd Firdaus and Mirin, Siti Nur Suhaila and Azahar, Arman Hadi (2018) Dynamic Modelling And Analysis Of 3D Overhead Gantry Crane System. International Journal Of Engineering & Technology, 7. pp. 1257-1262. ISSN 09754024,23198613

Ab Rahman, Mohd Hidayat and Maidin, Nurul Ain and Ahmad, Mohd Nazri and Osman, Mohd Hairizal and Wahid, Mohammad Khalid and Hussin, Mohamed Saiful Firdaus and Mohd Yassim, Halyani and Razali, Muhammad Zayani Afiq (2018) A Prototype Development Of Anti-Hunchback Device. Journal of Mechanical Engineering, SI5(1). pp. 192-209. ISSN 1823-5514

Ab Wahab, Norfariza and Abd Rahim, Abdul Fattah and Nordin, Abd Khahar and Bidin, Basri and Ibrahim, Mohd Azimin and Zahari, Madiha and Abd Mutalib, Nurliyana (2018) Development of portable linear positioning table for drilling machine. ARPN Journal Of Engineering And Applied Sciences, 13 (3). pp. 809-813. ISSN 1819-6608

Ab Wahab, Norfariza and Abdul Rani, Muhammad Haris and Nordin, Abd Khahar and Nordin, Nor Fauzi and Ibrahim, Mohd Azimin and Basar, Mohd Farriz and Boejang, Hambali (2018) Design and development of fixable clamping for milling machine based on machining performance. International Journal Of Applied Engineering Research, 13 (1). pp. 576-581. ISSN 0973-4562

Ab Wahab, Norfariza and Md. Rozali, Sahazati and Abdul Rahman, Nabil Haikal and Nordin, Abd Khahar and Che Amran, Aliza and Mohamad Saleh, Saleha (2018) Design Optimization And Development Of Portable Vacuum Clamping (VacCLAMP) Based On Machining Performances. International Journal Of Engineering & Technology, 18 (01). pp. 11-16. ISSN 2227-2712

Ab Wahab, Norfariza and Mohd Saleh, Afferry and Nordin, Abd Khahar and Tamin, Nor Fauzi and Ibrahim, Mohd Azimin and Ahmad, Suziana and Abdul Hadi, Dayanasari (2018) Development Of Portable Magnetic Clamping For Lathe Machine. ARPN Journal Of Engineering And Applied Sciences, 13 (3). pp. 902-906. ISSN 1819-6608

Ab Wahab, Norfariza and Mohd Shuhada, Muhammad Khusyairi and Nordin, Abd Khahar and Md Basar, Mohd Farriz and Boejang, Hambali and Mohd Najib, Suhaila and Mohd Nor, Rozilawati (2018) Design And Development Of New Clamping Method For Waterjet Machine (JetCLAMP) Based On Machining Performances. International Journal Of Engineering & Technology (IJET), 18 (01). pp. 1-5. ISSN 2227-2712

Abdul Rahman, Ahmad Idil and Baharudin, Zikri Abadi and Bahari, Muhammad Akmal and Zulkefle, Ahmad Aizan and Zainon, Maslan and Mat Hanafiah, Mohd Ariff (2018) Sub microsecond analysis of negative cloud-to-ground lightning flashes. Indonesian Journal Of Electrical Engineering And Computer Science, 11 (2). pp. 711-717. ISSN 2502-4752

Abdul Rasib, Amir Hamzah and Mohamad Rafaai, Zubaidi Faiesal and Muhamad Zuki, Mohd Shafinaz (2018) Enhancing E-Commerce To Sustain Economy In Malaysia:Short Review. International Journal Of Science And Business, 2. pp. 718-724. ISSN 2520-4750/2521-3040

Abdullah, Rohana and Hashim, Hanizam and Abd Rahman, Md Nizam and Salleh, Mohd Rizal (2018) Development Of Enterprise Human System Modelling Framework In Support Of Cellular Manufacturing Lean Operation. Journal Of Advanced Manufacturing Technology (JAMT) , 12 (1 (1)). pp. 235-245. ISSN 1985-3157

Hamzah, Rostam Affendi and Abd Gani, Shamsul Fakhar and Hamid, Mohd Saad and Kadmin, Ahmad Fauzan and Salam, Saifullah (2018) Disparity Map Algorithm Based On Edge Preserving Filter For Stereo Video Processing. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 10 (1-7). pp. 59-62. ISSN 2180-1843

Hamzah, Rostam Affendi and Ibrahim, Haidi (2018) Improvement Of Stereo Matching Algorithm Based On Sum Of Gradient Magnitude Differences And Semi-Global Method With Refinement Step. Electronics Letters, 54. pp. 876-878. ISSN 0013-5194

Hussin, Mohamed Saiful Firdaus and Mohd Yassim, Halyani and Zainon, Maslan and Ahmad, Emy Zairah and Idris, Norain (2018) Modelling And Simulation Of A Wind Turbine With Doubly Fed Induction Generator In Full Load Operation. ARPN Journal Of Engineering And Applied Sciences, 13 (1). pp. 57-63. ISSN 1819-6608

Indra, Win Adiyansyah and Morad, Fatimah and Mohd Yusof, Norfadzlia and Che Aziz, Siti Asma (2018) GSM-Based Smart Energy Meter With Arduino Uno. International Journal Of Applied Engineering Research, 13 (6). pp. 3948-3953. ISSN 0973-4562

Jamil Alsayaydeh, Jamil Abedalrahim and Shkarupylo, Vadym and Hamid, Mohd Saad and Skrupsky, Stepan and Oliinyk, Andrii (2018) Stratified Model Of The Internet Of Things Infrastructure. Journal Of Engineering And Applied Sciences, 13 (20). pp. 8634-8638. ISSN 1816-949X

Jidin, Aiman Zakwan and Mahzan, Irna Nadira and Hassim, Nurulhalim and Kadmin, Ahmad Fauzan (2018) Low-Cost And Portable Interactive Sinusoidal Digital Signal Generator By Using FPGA. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 10 (1-2). pp. 19-24. ISSN 2180-1843

Lau, Kok Tee and Kok, Swee Leong and Lau, Kok Tee (2018) Design, Fabrication And Characterization Of Piezoelectric P(Vdf-Trfe) Thick Film On Flexible Substrate For Energy Harvesting. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 10 (1). pp. 63-68. ISSN 2180-1843

MUHAMMAD SHARIL BIN YAHAYA, MUHAMMAD SHARIL BIN YAHAYA and Azis, Norhafiz and Selva, Amran Mohd and Kadir, Mohd Zainal Abidin Ab and Jasni, Jasronita and Kadim, Emran Jawad and Hairi, Mohd Hendra and Ghazali, Young Zaidey Yang (2018) A MAINTENANCE COST STUDY OF TRANSFORMERS BASED ON MARKOV MODEL UTILIZING FREQUENCY OF TRANSITION APPROACH. ENERGIES, 11. pp. 1-14. ISSN 1996-1073

Mansoor, Hamdan O. and Weston, Richard H. and Abdullah, Rohana and King, Steven and Jackson, Peter and Foley, Paul (2018) A Systemic Approach To Applying Asset Orchestration Theory. International Journal Of Agile Systems And Management (IJASM), 11 (4). pp. 315-339. ISSN 1741-9174

Md. Rozali, Sahazati and Tan, Yi Lin and Che Amran, Aliza and Kamarudin, Muhammad Nizam (2018) Development Of A Wearable Ankle Rehabilitation Device For Patient With Calf Muscles Flexibility Problems. Journal Of Fundamental And Applied Sciences, 10 (2S). pp. 365-376. ISSN 1112-9867

Mohd Annuar, Khalil Azha and Mohd Ab Halim, Mohd Firdaus and Harun, Mohamad Haniff and Ab Hadi, Nik Azran (2018) An Analysis Of The Beneficial Of Energy Saving Device. ARPN Journal Of Engineering And Applied Sciences, 13 (8). pp. 2912-2915. ISSN 1819-6608

Mohd Annuar, Khalil Azha and Ab Hadi, Nik Azran and Mohamad Sapiee, Mohd Razali and Harun, Mohamad Haniff and Saadon, Intan Mastura (2018) Implementation Of PS2 Remote Control And Monitoring System For Android Operating System Based Robot Platform. Journal Of Engineering And Applied Sciences, 13. pp. 1851-1858. ISSN 1816-949X

Mohd Annuar, Khalil Azha and Fahmi, Muhammad and Quah, Jit Shen (2018) Efficient Object Isolation In Complex Environment Using Manipulation Primitive On A Vision Based Mobile 6DOF Robotic Arm. International Journal of Mechanical & Mechatronics Engineering IJMME-IJENS, 18. pp. 50-56. ISSN 2227-2771

Mohd Annuar, Khalil Azha and Harun, Mohamad Haniff and Nor Azmi, Muhammad Wahyuddin and Mohd Aras, Mohd Shahrieel and Azlan, Umar Al-Amani and Azahar, Arman Hadi and Mohd Ab Halim, Mohd Firdaus and Yaakub, Muhamad Faizal and Zainal Abidin, Amar Faiz (2018) A Study On The Potential Of Peltier In Generating Electricity Using Heat Loss At Engine And Exhaust Vehicle. Journal Of Advanced Research In Fluid Mechanics And Thermal Sciences, 49 (1). pp. 77-84. ISSN 2289-7879

Mohd Nor, Rozilawati and Md Rozali, Sahazati and Chong, Shin Horng (2018) Positioning Control And Operational Evaluation Of A One Mass Rotary System Using NCTF Controller. International Journal Of Engineering & Technology, 7. pp. 111-115. ISSN 2227-524X

Mohd Tumari, Mohd Zaidi and Abd Rashid, Wan Norhisyam and Ab Hadi, Nik Azran and Ahmad, Mohd Ashraf and Suid, Mohd Helmi and Ghazali, Mohd Riduwan (2018) Liquid Slosh Suppression By Using Hybrid Model-Free Fuzzy-PID Controller With Derivative Filter. Journal Of Advanced Research In Dynamical And Control Systems, 10spec. pp. 1423-1433. ISSN 1943-023X

Mohd Tumari, Mohd Zaidi and Mohd Nasir, Muhamad Azidi and Saat, Shahrizal and A Subki, A Shamsul Rahimi and Abd Rashid, Wan Norhisyam and Suid, Mohd Helmi and Ghazali, Mohd Riduwan (2018) The Control Schemes Of Vehicle Steer By Wire System By Using Fuzzy Logic And Pid Controller. Research Journal Of Applied Sciences, 13 (2). pp. 137-145. ISSN 1815-932X

Mohd Yusof, Norfadzlia and Zulkifli, Mohd Faizal and Mohd Yusof, Nor Yusma Amira and Azman, Azziana Afififie (2018) Smart Waste-Bin With Real-Time Monitoring System. International Journal Of Engineering And Technology(UAE), 7. pp. 725-729. ISSN 2227-524X

Muhamad Damanhuri, Amir Abdullah and Abdullah, Muhammad Ilman Hakimi Chua and Lubis, Abdul Munir Hidayat Shah and Zakaria, Muhammad Zulfattah and Hussin, Mohamed Saiful Firdaus and Kasno, Mohammad `Afif (2018) Development Of TEG Peltier Device For Heat Harvesting From 1.5 HP Split Unit Air Conditioning System. International Journal Of Applied Engineering Research, 13 (5). pp. 2390-2394. ISSN 0973-4562

Nirmal, Umar and Megat Ahmad, Megat Muhammad Hamdan and Yaakob, Mohd Yuhazri and Amir Mohamed, Kamarul (2018) Degradation Behaviour Of Treated Betelnut Fibres Reinforced Polyester Composites For Tribological Applications. World Review Of Science, Technology And Sustainable Development, 14 (2/3). pp. 180-227. ISSN 1741-2242

Omar, Nooririnah and Raja Mohd Rasi, Raja Zuraidah and Zainudin, Mohd Harris Fadhilah and Azhari, Muhamad Azwar and Yusuf, Yusliza and Mustafa, Nuzaimah and Azlan, Umar Al Amani and Razi, M. H.F.A. and Ismail, Syahriza and Mohamad, S. (2018) Experimental Study Of Welded Joints On Steel Plate Cold-Rolled Sheet Metal Using Different Electrode Tips. Journal of Advanced Manufacturing Technology (JAMT) , 12. pp. 1-16. ISSN 1985-3157

Wan Mahmood, Wan Hasrulnizzam and A., Fatimah and Kamat, Seri Rahayu and Hambali, Ruzy Haryati and Mohd Razlam, Noor Amira (2018) Level Of Indoor Air Quality Among Malaysian Commuter Users: A Case Study. Malaysian Journal Of Public Health Medicine (MJPHM), Spec 2. pp. 79-88. ISSN 1675-0306