Items where Division is "Faculty of Mechanical Engineering > Department of Automotive" and Year is 2012

Article

Abdollah, Mohd Fadzli bin (2012) Deformation–wear transition map of DLC coating under cyclic impactloading. Wear, 27 (-). pp. 435-441. ISSN 0043-1648

Abdollah, Mohd Fadzli bin (2012) Future developments of a deformation-wear transition map of DLC coating. Tribology Online, 7 (3). pp. 107-111. ISSN 1881-2198

Abdul Kadir, Faizul Akmar and Hudha, Khisbullah and Mohammad Nasir, Mohd Zakaria (2012) Vehicle Speed Control Using Gain Scheduling PID Controller. Applied Mechanics And Materials, 165. pp. 170-174. ISSN 1662-7482

Abdul Kadir, Faizul Akmar and Mohammad Nasir, Mohd Zakaria and Hudha , Khisbullah and Amir, Mohd Zubir (2012) Modelling,Simulation And Validation Of 9 DOF Vehicles Model For Automatic Steering System. Applied Mechanics And Materials, 165. pp. 192-196. ISSN 1662-7482

Abdul Munir, Fudhail and Mohd Azmi, Mohd Irwan and Razali, Nadlene and Mat Tokit, Ernie (2012) The effect of parameter changes to the performance of a triangular shape interrupted microchannel heat sink. Jurnal Teknologi, 58. pp. 33-37. ISSN 0127–9696

Aparow, Vimal Rau and Ahmad, Fauzi and Hassan, Muhammad Zahir and Hudha, Khisbullah (2012) Development of Antilock Braking System Based on Various Intelligent Control System. Applied Mechanics and Materials, 229-231. pp. 2394-2398. ISSN 1660-9336

FUDHAIL ABDUL MUNIR, F.A Munir and MOHD RODY MOHD ZIN, M.R.M Zin and NOR AZWADI CHE SIDIK, N.A.C Sidik and MOHD IRWAN MOHD AZMI, M.I.M Azmi (2012) Numerical Simulations of Flow Behaviour in Driven Cavities at High Reynolds Numbers. IIUM Engineering Journal, Special Issue in Mechanical Engineering, 12 (6). pp. 97-103. ISSN 1511-788X

Fudhail, Abdul Munir (2012) Accurate Numerical Prediction of Incompressible Fluid Flow in Lid-Driven Cavities. Applied Mechanics and Materials, 110-11 (2012). pp. 4365-4372. ISSN 1660-9336

Hassan, Muhammad Zahir and Magaswaran, K. and Phuman Singh, A.S. (2012) High Speed Experimental Study of Friction Induced Vibration in Disc Brakes. Applied Mechanics and Materials, 229-231. pp. 747-749. ISSN 1660-9336

Mohammad Nasir, Mohd Zakaria and Dwijotomo, Abdurahman and Abdullah, Mohd Azman and Hassan, Muhammad Zahir and Hudha, Khisbullah (2012) Hardware-in-the-loop simulation for automatic rack and pinion steering system. Applied Mechanics and Materials, 229-231. pp. 2135-2139. ISSN 1660-9336

Mustaffa Albakri, Ammar Alfaiz and Hassan, Muhammad Zahir and Mohd Tahir, Musthafah and Rusnandi, Herdy and Mohd Adrinata, Shaharuzaman and Mansor, Muhd Ridzuan (2012) Design and Development of UTeM Perodua Eco-challenge Vehicle. Applied Mechanics and Materials, 165. pp. 202-208. ISSN 1660-9336

Nor Azwadi Che Sidik, N.A.C Sidik and Fudhail Abdul Munir, F.A. Munir (2012) Mesoscale Numerical Prediction of FLuid FLow in a Shear Driven Cavity. Arabian Journal for Science and Engineering, 37 (6). pp. 1723-1735. ISSN 13198025

Nordin, Mohd Ridzuan and Mohd Husin, Mohd Haizal and Li, Jinli and Liew, Kong Yong and Chin, Sim Yee (2012) Copper Containing SBA-15 Prepared Through Ph Modification Method And Its Catalytic Activity For N2O Decomposition. Journal of South-Central University for Nationalities(Nat.Sci.Edition) (1). pp. 1-7. ISSN 1672-4321

Nurfaizey , Abdul Hamid and Stanger, Jonathan and Tucker, Nick and Buunk, Neil and Wallace, Andrew and Staiger, Mark (2012) Manipulation of electrospun fibres in flight: the principle of superposition of electric fields as a control method. Journal of Materials Science, 47 (3). pp. 1156-1163. ISSN 1573-4803

tamaldin, noreffendy and Dzulkifli, Mohd Amin (2012) INVESTIGATION OF ENGINE PERFORMANCE AND EMISSION LEVEL OF SI ENGINE RUNNING WITH DIFFERENT RON FUEL GRADES. 3rd International Conference on Engineering and ICT (ICEI2012) Melaka, Malaysia 4 – 6 April 2012. na-na. ISSN none

Book Chapter

Mohammad Nasir, Mohd Zakaria and Dwijotomo, Abdurahman and Amir, Mohd Zubir and Abdullah, Mohd Azman and Hassan, Muhammad Zahir and Hudha, Khisbullah (2012) Position tracking of automatic rack and pinion steering linkage system through hardware in the loop testing. In: 2012 IEEE Control and System Graduate Research Colloquium (ICSGRC 2012). Proceedings of a meeting held 16-17 July 2012, Shah Alam, Selangor, Malaysia. (CFP120). Institute of Electrical and Electronics Engineers ( IEEE ), pp. 111-115. ISBN 9781467320344

Nurfaizey , Abdul Hamid and Tucker, Nick and Stanger, Jonathan and Staiger, Mark (2012) Functional nanofibers in clothing for protection against chemical and biological hazards. In: Functional nanofibers and their applications. Woodhead Publishing, pp. 236-261. ISBN 978-0-85709-069-0

Conference or Workshop Item

ABDULLAH, Mohd Azman and Jenal, Rustamreen and MICHITSUJI, Yohei and NAGAI, Masao (2012) ANALYSIS OF DYNAMIC INTERACTION BETWEEN FLEXIBLE BODY OF OVERHEAD CONTACT WIRE AND ACTIVE CONTROL PANTOGRAPH CONSIDERING VERTICAL BODY VIBRATION. In: 3rd International Conference on Engineering and ICT (ICEI2012), 4-5, April 2012, Melaka, Malaysia.

ABDULLAH, Mohd Azman and Shaharuzaman, M.A and Jenal, Rustamreen and Boejang, Hambali and Mat Idera , I.H. and Mohd Razi, M.Z. (2012) Development of Conceptual Vehicle All-Wheel-Nuts Remover. In: iDECON 2012 – International Conference on Design and Concurrent Engineering, 15 - 16 October 2012, Melaka.

Abdollah, Mohd Fadzli bin and tamaldin, noreffendy and Amiruddin, Hilmi and Mohd Zamberi, Mahanum and Rody, M. Z. M and Mat Kamal, Sushella Edayu (2012) Tribology-Related Researches at Faculty of Mechanical Engineering, Universiti Teknikal Malaysia Melaka (UTeM). In: Malaysia-Japan Tribology Meeting 2012, 27-28 August 2012, Kuala Lumpur.

Abdullah, Mohd Azman and Jenal, Ruztamreen and MICHITSUJI, Yohei and NAGAI, Masao (2012) Analysis Of Dynamic Interaction Between Flexible Body Of Overhead Contact Wire And Active Control Pantograph Considering Vertical Body Vibration. In: 3rd International Conference on Engineering and ICT (ICEI2012) , 4-6 April 2012, Mahkota Hotel, Melaka. (Submitted)

Abdullah, Mohd Azman and Mansor, Muhd Ridzuan and Mohd Tahir, Musthafah and Abdul Kudus, Syahibudil Ikhwan and Hassan, Muhammad Zahir and Ngadiman, Mad Nasir (2012) Design, Analysis and Fabrication of Chassis Frame for UTeM Formula VarsityTM Race Car. In: International Conference on Manufacturing and Industrial Engineering (ICMIE’12) Dec. 29-30, 2012, Kuala Lumpur (Malaysia), 29 - 30 December 2012, Grand Seasons Hotel, Kuala Lumpur.

Aparow, Vimal Rau and Ahmad, Fauzi and Hassan, Muhammad Zahir and Hudha, Khisbullah (2012) Development Of Antilock Braking System Based On Various Intelligent Control System. In: 2012 International Conference on Mechanical and Electrical Technology (ICMET 2012) , 24-26 Julai 2012, Kuala Lumpur . (Submitted)

Aparow, Vimal Rau and Hassan, Muhammad Zahir and Hudha, Khisbullah and Ahmad, Fauzi (2012) SENSORS CONFIGURATION FOR SMALL SCALE AUTONOMOUS GROUND VEHICLE. In: 3rd International Conference on Engineering and ICT (ICEI2012), 4 – 5 April 2012, Melaka, Malaysia.

Ashari, Muhamad Hafizullah and Mansor, Muhd Ridzuan and Mohd Rosli, Mohd Afzanizam and Akop, Mohd Zaid and Salim, Mohd Azli and Shaharuzaman, Mohd Adrinata (2012) Design Of Space Frame Chassis For UTeM Formula Varsity Race Car. In: 3rd International Conference on Engineering & ICT (ICEI2012) , 4-6 April 2012, Mahkota Hotel, Melaka. (Submitted)

Hassan, Muhammad Zahir and Abdul Munir, Fudhail and Mohamad Zin, Mohd Rody and Mohd Irwan, Mohd Azmi (2012) THERMAL ANALYSIS OF A OF BRAKE DISC ROTOR FOR PERSONAL ELECTRIC VEHICLE. In: 3rd International Conference on Engineering and ICT (ICEI2012), 4 – 5 April 2012, Melaka, Malaysia.

Jamaludin, Mohd Zaini and Abdul Kudus, Syahibudil Ikhwan and Mohd Rosli, Mohd Afzanizam and Salim, Mohd Azli (2012) Design And Manufacturing Of Formula Varsity Race Car Pedal System. In: 3rd International Conference on Engineering & ICT (ICEI 2012) , 4-6 April 2012, Mahkota Hotel, Melaka. (Submitted)

Kumaresan, Magaswaran and Phuman Singh, A.S. and Hassan, Muhammad Zahir (2012) High Speed Experimental Study Of Friction Induced Vibration In Disc Brakes. In: International Conference on Mechanical and Electrical Technology (ICMET 2012) , 24-26 Julai 2012, Kuala Lumpur. (Submitted)

Mohammad Nasir, Mohd Zakaria and Amir, Mohd Zubir and Hudha, Khisbullah and ABDULLAH, Mohd Azman and Hassan, Muhammad Zahir (2012) MODELING AND VALIDATION OF SIX-BAR RACK AND PINION STEERING LINKAGE SYSTEM. In: 3rd International Conference on Engineering and ICT (ICEI2012), 4 – 5 April 2012, Melaka, Malaysia.

Phuman Singh, A.S. and Hassan, Muhammad Zahir (2012) A parallel study of vibration analysis and acoustic analysis in low frequency brake noise. In: 4th International Conference on Noise, Vibration and Sound, 26-28 November 2012, Kuala Lumpur.

tamaldin, noreffendy and Abdollah, Mohd Fadzli bin (2012) Proposal for hybrid passive cooling system of batteries In the electric car. In: The 3rd International Conference on Engineering and ICT 2012 (ICEI2012), 4 - 6 April 2012, Melaka.

Book

Rau, Vimal and Ahmad, Fauzi and Hassan, Muhammad Zahir and Hudha, Khisbullah (2012) Identification of Intelligent Controls in Developing Anti-Lock Braking System. Proceedings of International Conference on Design and Concurrent Engineering 2012 October 15 – 16 Hotel Equatorial Melaka Malaysia . Universiti Teknikal Malaysia Melaka, Malaysia.