Items where Division is "Faculty of Mechanical Engineering > Department of Structure and Materials" and Year is 2012

Article

Abd Latif, M.J. and Jin, Z. and Wilcox, R.K. (2012) Biomechanical characterisation of ovine spinal facet joint cartilage. Journal of Biomechanics, 45. pp. 1346-1352. ISSN 0021-9290

Abdullah, Shahrum and Zakaria, Kamarul Ariffin and Ghazali, Mariyam Jameelah (2012) Observation of the fatigue crack propagation rate of an aluminum alloy specimen under fatigue spectrum loadings. Materials Testing, 54 (10). pp. 663-673. ISSN ISSN 0025-5300

Ali, Mohd Basri (2012) Investigation of Energy Absorbed from an Instrumented Charpy Impact on Automotive Specimens. Applied Mechanics and Materials. ISSN 1660-9336

Hasan, Nor Halim and Said, M. R and Leman, A.M (2012) Local Exhaust Ventilation and Application: A Review. International Journal of Engineering & Technology. pp. 39-43. ISSN 127904-7575

Kok, Chee Kuang and J.W.C. Chin and M.M. Rajmohan and V.S.H. Yeo and Said, Md Radzai (2012) Investigating The Effects Of Lead Forming Parameters On Intermetallic Layer Crack Using The Finite-Element Method. Journal of Electronic Materials, 41 (4). pp. 774-781. ISSN 0361-5235

Lau, Saijod T.W. and Said, M. R. and Yaakob, Mohd Yuhazri (2012) On the effect of geometrical designs and failure modes in composite axial crushing: A literature review. Composite Structure, 94 (3). pp. 803-812. ISSN 0263-8223

Mohd Daud, Mohd Ahadlin (2012) Influence of Polymer Waste (Polyethylene Terephthalate) in Composites Structure Materials. European International Journal of Science and Technology, 1 (3). pp. 15-22. ISSN ISSN: 2304-9393

Mohd Daud, Mohd Ahadlin (2012) Plane Strain Fracture Toughness Determination for Magnesium Alloy. JOURNAL OF MECHANICAL ENGINEERING AND TECHNOLOGY (JMET), 4 (2). pp. 45-51. ISSN 2180-1053

Mohd Khairi, Mohamed Nor and Okubo, Shigenori (2012) Fuzzy servo control of an inverted pendulum system. Artificial Life and Robotics. pp. 245-250. ISSN 1433-5298

Putra, Azma (2012) Effects of Structural Parameters on the Dynamics of a Beam Structure with a Beam-Type Vibration Absorber. Advance in Acoustics and Vibration, 2012. pp. 1-10. ISSN 1687-627X

Putra, Azma (2012) Experimental Investigation on the Effect of Container Geometry Change to Liquid Sloshing. Applied Mechanics and Materials, 165. pp. 160-164. ISSN 1660-9336

Putra, Azma (2012) On a simple technique to measure the airborne noise in a car interior using substitution source. International Journal of Vehicle Noise and Vibration, 8 (3). pp. 275-287. ISSN 1479-148X

Putra, Azma and Munir, Fudhail (2012) On a simple technique to measure the airborne noise in a car interior using substitution source. International Journal of Vehicle Noise and Vibration, 8 (3). pp. 275-287. ISSN 1479-148X

Ramlan, Roszaidi and Brennan, Michael John and Mace, Brian and Stephen, Burrow (2012) On the performance of a dual-mode non-linear vibration energy harvesting device. Journal of Intelligent Material Systems, 23 (13). pp. 1423-1432. ISSN 1244-3017

Said, M. R and Hasan, Nor Halim and Leman, A.M. (2012) Design of Local Exhaust Ventilation for Spray Booths: Proposed Study. ARPN Journal of Science and Technology, 2 (6). pp. 541-545. ISSN 2225-7217

Said, Md Radzai and Yuhazri, Yaakob and Lau, Saijod T.W. (2012) The Finite Element Analysis On Hexagonal Ring Under Simple Lateral Loading. Global Engineers & Technologists Review, 2 (2). pp. 1-7. ISSN 2231-9700

Salim, Mohd Azli and Abd Munir, Fudhail and Abdul Halim , Nur Baiduri (2012) Development an Experimental Rig of High Rise Building to Suppress a Vertical Vibration during Earthquake Phenomena. International Review of Civil Engineering , 3 (2). pp. 111-119. ISSN 2036-9913

Salim, Mohd Azli and Abd Munir, Fudhail and Noordin, Aminurrashid (2012) Experimental Study on Vibration Level of Automotive Flexibel Wiper System. Journal of Engineering and Technology, 3. pp. 123-138. ISSN 2180-3811

Salim, Mohd Azli and Noordin, Aminurrashid (2012) A Study of the Mode Shape Effect in Automobile Braking System. International Review of Mechanical Engineering, 6 (4). pp. 719-723. ISSN 1970-8742

Salim, Mohd Azli and Noordin, Aminurrashid and ABDULLAH, Mohd Azman (2012) Modeling, Simulation and Validation of Tuned Mass Damper for High Rise Structure with Control Scheme to Suppress Dynamic Unbalance Force. Wulfenia Journal, 19 (8). pp. 298-314. ISSN 1561-882X

Sivakumar, Dhar Malingam (2012) Application of Total Productive Maintenance to Reduce Non-Stick on Pad Problem in IC Packaging. International Journal of Engineering and Science, 3 (1). pp. 14-32. ISSN 2086-3799

Sivakumar, Dhar Malingam (2012) Numerical investigation of the effect of temperature on the formability of a thermoplastic fibre metal laminate. Proceedings: the 7th Australasian Congress on Applied Mechanics, ACAM 7. pp. 267-275. ISSN 9781922107619

Zakaria, Kamarul Ariffin (2012) Elevated Temperature Fatigue Fracture Behaviour of Aluminium Alloy Subjected to Spectrum Loadings. Applied Mechanics and Materials, 165. pp. 219-223. ISSN ISSN 1660-9336

Zakaria, Kamarul Ariffin (2012) FRACTOGRAPHY ANALYSIS OF Al6061 UNDER FATIGUE SPECTRUM LOADINGS. Engineering e-Transaction, 7 (1). pp. 28-33. ISSN ISSN 1823-6379

Conference or Workshop Item

Abdullah, Yasseer and Putra, Azma and Efendy, Hady and Wan Mohamad, Wan Mohd Farid and Ayob, Md Razali (2012) The effect of binder on the acoustical performance of the paddy straw ‘green’ sound absorber. In: 3rd International Conference on Engineering and ICT (ICEI2012) , 4 – 6 April 2012, Melaka, Malaysia .

Azmi, M.N and Saleman, Abdul Rafeq and Razali, Nadlene and Mohd Azmi, Mohd Irwan and Aishah, A.M. (2012) Tensile And Hardness Properties Of Kenaf-Pp/Pla Composite Filled Nanoclay. In: 3rd International Conference on Engineering & ICT (ICEI2012) , 4-6 April 2012, Mahkota Hotel, Melaka. (Submitted)

Fadhilah, S.A and Rafeq, Saleman Abdul and Hairul, B. and Nur Hazwani, Mokhtar and Nona Merry, M. Mitan (2012) NANOFLUID AS COOLANT IN AUTOMOTIVE COOLING SYSTEM–HEAT TRANSFER CHARACTERISTICS OF CAR RADIATOR USING CU-BASED NANOFLUID. In: 3rd International Conference on Engineering and ICT (ICEI2012) , 4 – 5 April 2012, Melaka, Malaysia .

Hasan, Nor Halim and Said, Md Radzai and Leman, Abdul Mutalib and D.Pagukuman, B. Norerama and Othman, Jaafar (2012) Data comparison on fumes local exhaust ventilation: Examination and testing compliance to USECHH regulation 2000. In: Scientific Conference on Occupational Safety & Health, 12-13 Dec. 2012, NOSH Bandar Baru Bangi.

Hasan, Nor Halim and Said, M. R and Leman, A. M (2012) Local Exhaust Ventilation: PAST, PRESENT, and FUTURE. In: 15th Conference and Exibition on Occupational Safety & Health, 2-4 Sept 2012, Sunway Pyramid Convention Centre, Selangor.

M. R, Said and M.K., Ismail (2012) Experimental investigation of Paper Honeycomb subjected to quasi-static loading. In: International Conference on Engineering, Applied Sciences, and Technology, November 21 – 24, 2012, , Swissôtel Le Concorde, Bangkok, Thailand.

Putra, Azma and Fariza, Noor and Ramlan, Roszaidi (2012) CHARACTERIZATION OF A STRUCTURE- BORNE SOURCE USING THE RECEPTION PLATE METHOD. In: 3rd International Conference of Engineering and ICT 2012, 4 - 6 April 2012, Melaka.

Putra, Azma and Ismail, Ahmad Yusuf and Ayob, Md Razali (2012) INSERTION OF A MICRO-PERFORATED PANEL TO IMPROVE SOUND TRANSMISSION LOSS OF A DOUBLE-LEAF PARTITION. In: 3rd International Conference on Engineering and ICT (ICEI2012) , 4 – 6 April 2012, Melaka, Malaysia .

Putra, Azma and Sajidin, Muhammad and Salleh, Norliana and Hady, Efendy (2012) MODELLING THE EFFECT OF VIBRATION ON THE SOUND ABSORPTION PERFORMANCE OF GREEN SOUND ABSORBER USING WAVE PROPAGATION TECHNIQUE. In: 3rd International Conference on Engineering and ICT (ICEI2012) , 4 – 6 April 2012, Melaka, Malaysia .

SAID, MD RADZAI (2012) Dynamic Axial Crushing Of Empty Hexagonal Tube. In: 3rd International Conference on Engineering & ICT (ICEI2012) , 4-6 April 2012, Mahkota Hotel, Melaka. (Submitted)

SAID, MD RADZAI and Zakaria, Mohd Firdaus and Ismail, Mohd Khairi (2012) The Specific Energy Absorption Of Local Wood Subjected To Quasi-Static Loading. In: International Conference on Application and Design in Mechanical Engineering (ICADME 2012) , 27-28 Februari 2012, Bayview Beach Resort, Penang. (Submitted)

Said, M. R. and Ismail, M. K. and Md Akil, H (2012) DYNAMIC BEHAVIOUR OF PAPER HONEYCOMB SANDWICH PANELS. In: The 15th International Conference on Applied Mechanics and Mechanical Engineering, 29-31 May 2012, Cairo.

Salim, Mohd Azli and Noordin, Aminurrashid and Abd Munir, Fudhail and Mat Nuri, Nur Rashid (2012) The Relationship of Contact Angle and Input Shaping Scheme in Automotive Wiper System. In: 2012 IEEE RIVF International Conference on Computing & Communication Technologies, Research, Innovation, and Vision for the Future, March 2012, Ho Chi Minh City, Vietnam.

Salim, Mohd Azli and Noordin, Aminurrashid and Mansor, Muhd Ridzuan (2012) A PRELIMINARY STUDY OF LOWER SIDE BEAM STRUCTURE ON LONGITUDINAL BRIDGE MODEL. In: 3rd International Conference on Engineering and ICT (ICEI2012), 2012, Mahkota Hotel, Melaka.

Sivakumar, Dhar Malingam (2012) EFFECT OF PROCESS PARMAETRS DURING FORMING OF SELF REINFORCED – PP BASED FIBER METAL LAMINATE. In: Mechanics of Nano, Micro and Macro Composite Structures, 18-20 June 2012, Politecnico di Torino.

Sivakumar, Dhar Malingam (2012) FORMING ANALYSIS OF COMPOSITE AND FIBRE-METAL LAMINATE SYSTEMS. In: ECCM15 - 15TH EUROPEAN CONFERENCE ON COMPOSITE MATERIALS, 24-28 June 2012, Venice, Italy.

Sivakumar, Dhar Malingam (2012) FORMING ANALYSIS OF SELF-REINFORCED POLYPROPYLENE BASED COMPOSITE-ALUMINIUM HYBRID STRUCTURES. In: 3rd International Conference on Engineering and ICT (ICEI2012), 4 – 5 April 2012, Melaka, Malaysia.

Wai, Chee Mun and Putra, Azma and Ahmad Rivai (2012) Analysis Of Vibration Level Of A Perforated Panel Using Finite Element Method. In: 3rd International Conference on Engineering and ICT (ICEI2012) , 4 – 6 April 2012, Melaka, Malaysia .