Items where Division is "Faculty of Mechanical Engineering > Department of Thermal Fluids" and Year is 2013

A

Ahmad, Mohd Azhar and Herawan, Safarudin Gazali and Yusof, Ahmad Anas (2013) Effect of Activation Time on the Pinang Frond Based Activated Carbon for Remazol Brilliant Blue R Removal. In: Malaysian Technical Universities Conference on Engineering and Technology (MUCET 2013), 3 - 4 December 2013, MS Garden Hotel, Kuantan, Pahang..

C

Cheng, See Yuan and Tsubokura, Makoto and Okada, Yoshihiro and Nakashima, Takuji and Nouzawa, Takahide (2013) Aerodynamic Pitching Stability Of Sedan-Type Vehicles Influenced By Pillar-Shape Configurations. In: SAE 2013 World Congress & Exhibition, 16-18 April 2013, Detroit, USA.

H

Herawan, Safarudin Gazali and Abdul Hakim, Rohhaizan and Ahmad Faris, Ismail and Mohammed, Ataur Rahman (2013) POWER PREDICTED FROM WASTE HEAT RECOVERY EXHAUST OF NATURAL ASPIRATED ENGINE. In: International Conference on Mechanical, Automotive and Aerospace Engineering 2013, 2 - 4 July 2013, Kuala Lumpur, Malaysia. (Submitted)

Herawan, Safarudin Gazali and Ayob, Md Razali and Putra, Azma (2013) Characterization of activated carbons from Oil-palm-shell by CO2 activation with no holding carbonization temperature. The Scientific World Journal, 2013 ( (Articl). pp. 1-6. ISSN 1537-744X (Online)

Herawan, Safarudin Gazali and Putra, Azma and Yusof, Ahmad Anas (2013) Effect of CO2 Flow Rate on the Pinang Frond-Based Activated Carbon for Methylene Blue Removal. The Scientific World Journal, 2013 (545948). pp. 1-6. ISSN 1537-744X (Online)

M

MOHD HANAFI, MOHA HANAFI and ABDULLAH, MOHD FADZLI and Saleman, Abdul Rafeq and MOHD NOR, NUR FATHIAH and Shamsuddin, Shamsul Anuar (2013) Comparison of Soot Particle Movement Based on Crank Angle. Procedia Engineering . pp. 245-250. ISSN 1877-7058

Mohamad Shukri , Zakaria and Muhammad Zaidan, Abdul Manaf and Mohd Hafidzal, Mohd Hanafi and Mohd Noor Asril, Saadun (2013) Computational Simulation of Boil-Off Gas Formation inside Liquefied Natural Gas tank using Evaporation Model in ANSYS Fluent. Applied Mechanics and Materials, 393. pp. 839-844. ISSN 1660-9336

Mohamad Shukri , Zakaria (2013) Greenhouse Gas Reduction by Utilization of Cold LNG Boil-off Gas. Procedia Engineering, 53. pp. 645-649. ISSN 1877-7058

Mohd Hafidzal, Mohd Hanafi and Mohamad Shukri , Zakaria and Muhammad Zaidan, Abdul Manaf and Mohd Noor Asril, Saadun (2013) Effect of Soot Particle Diameter to Soot Movement in Diesel Engine. Journal of Engineering and Technology. pp. 85-93. ISSN 2180-3811

Mohd Hafidzal, Mohd Hanafi and Roslizar, Aiman and Zakaria, Mohamad Shukri and Saadun, Mohd Noor Asril and Saleman, Abd Rafeq (2013) Analysis of Soot Particle Movement in Diesel Engine under the Influence of Drag Force. Applied Mechanics and Materials, 393. pp. 275-280. ISSN 1660-9336

Mohd Hafidzal, Mohd Hanafi and Wan Mohd Faizal, Wan Mahmood and Muhammad Zaidan, Abdul Manaf and Mohamad Shukri , Zakaria and Mohd Noor Asril, Saadun and Mohd Nur Azmi, Nordin (2013) SOOT PARTICLE TRAJECTORIES OF A DI DIESEL ENGINE AT 18° ATDC CRANKSHAFT ANGLE. Materials Science and Engineering, 50 (012003). pp. 1-6. ISSN 1757-8981

Mohd Rosli, Mohd Afzanizam and Mat, Sohif and Ruslan, Mohd Hafidz and Sopian, Kamaruzzaman (2013) Parametric Study on Water Based Photovoltaic Thermal Collector. WSEAS Press. ISBN 978-1-61804-175-3

Mohd Saat, Fatimah Al Zahrah and Jaworski, Artur (2013) Oscillatory Flow and Heat Transfer Within Parallel-plate Heat Exchangers of Thermoacoustic Systems. In: World Congress on Engineering 2013, 3-5 July 2013, Imperial College, London.

O

Okada, Yoshihiro and Cheng, See Yuan and Tsubokura, Makoto and Nakashima, Takuji and Nouzawa, Takahide (2013) Aerodynamic stability of road vehicles in dynamic motion. In: The Seventh International Colloquium On Bluff Body Aerodynamics And Applications, 2-6 September 2012, Shanghai, China.

S

Saadun, Mohd Noor Asril and Abdul Manaf, Muhammad Zaidan and Zakaria, Mohamad Shukri and Mohd Hanafi, Mohd Hafdizal (2013) The effect of different aspect ratio and bottom heat flux towards contaminant removal using numerical analysis. IOP Conf.Series:Materials Scienceand Engineering, 50. pp. 1-10. ISSN 1757-8981

Saadun, Mohd Noor Asril and Mokhtar, Nur Hazwani and Zakaria, Mohamad Shukri and Abdul Manaf, Muhammad Zaidan and Mohd Hanafi, Mohd Hafidzal (2013) Numerical Analysis on the Effects of Cavity Geometry with Heat towards Contaminant Removal. Applied Mechanics and Materials, 393. pp. 851-856. ISSN 1662-7482

Suhaimi, Misha (2013) The CFD simulation of tray dryer design for kenaf core drying. Applied Mechanics and Materials. pp. 717-722. ISSN 1660-9336

Suhaimi, Misha (2013) Comparison of CFD Simulation on Tray Dryer System Between Porous and Solid Product. In: Latest Trends in Renewable Energy & Environmental Informatics. WSEAS Press, pp. 59-64. ISBN 978-1-61804-175-3

Suhaimi, Misha (2013) Review on the Application of a Tray Dryer System for Agricultural Products. World Applied Sciences Journal, 22 (3). pp. 424-433. ISSN 1818-4952

Suhaimi, Misha (2013) The Effect of Drying Air Temperature and Humidity on the Drying Kinetics of Kenaf Core. Applied Mechanics and Materials, 315. pp. 710-714. ISSN 1660-9336

Suhaimi , Misha (2013) The Prediction of Drying Uniformity in Tray Dryer System using CFD Simulation. International Journal of Machine Learning and Computing, 3 (5). pp. 419-423. ISSN 2010-3700

T

Tsubokura, Makoto and Cheng, See Yuan and Nakashima, Takuji and Okada, Yoshihiro and Nouzawa, Takahide and Doh, Deog-Hee (2013) Aerodynamic stability of road vehicles in dynamic pitching motion. Journal of Wind Engineering and Industrial Aerodynamics, 122. pp. 146-156. ISSN 0167-6105

Y

Yusof, Ahmad Anas and Wasbari, Faizil and Mohamad Shukri , Zakaria and Ibrahim, Mohd Qadafie (2013) Slip Flow Coefficient Analysis in Water Hydraulics Gear Pump For Environmental Friendly Application. IOP Conf. Series: Materials Science and Engineering, 50. pp. 1-8. ISSN 1757-899X

Yusof, Ahmad Anas and Wasbari, Faizil and Ibrahim, Mohd Qadafie (2013) Research Development of Energy Efficient Water Hydraulics Manipulator for Underwater Application. Applied Mechanics and Materials, 393. pp. 723-728. ISSN 1660-9336

Z

Zakaria, Muhammad Zulfattah (2013) Development of Flexible Mirror Holder For cCXRS Diagnostics for ITER. Lambert Academic Publisher, Saarburuecken, Germany. ISBN 978-3-659-42569-1

Zakaria, Muhammad Zulfattah (2013) Development of Flexible Mirror Mounts for cCXRS Diagnostics for ITER: Design, Calculation and Simulation of Flexures. Lambert Academic Publisher, Saarbruecken, Germany. ISBN 978-3659425691

Zakaria, Muhammad Zulfattah and Saleman, Abdul Rafeq and Zakaria, Mohd Shukri and Jumaidin, Ridhwan and Mohd Hanafi, Mohd Hafidzal and Idris, Norain and Zakaria, Nazri Huzaimi and Mohd Najib , Ali Mokhtar and Mohd Isa, Nur Shakinah (2013) Gnielinski method in calculating the heat transfer coefficient for metallic solar tower absorber. Procedia Engineering , 68. pp. 293-298. ISSN 1877-7058 (Submitted)