Items where Division is "Faculty of Manufacturing Engineering > Department of Engineering Materials" and Year is 2013

A

ABD RAZAK , JEEFFERIE and Mohamad, Noraiham and Ab Maulod, Hairul Effendy (2013) Processability of polypropylene/multiwalled carbon nanotube nanocomposites via direct melt compounding. Journal of Elastomers & Plastics, 45 (3). pp. 239-251. ISSN 0095-2443

Abd Manaf, Mohd Edeerozey (2013) Incorporation of low-mass compound to alter the orientation birefringence in cellulose acetate propionate. Optical Materials, 35. pp. 1443-1448. ISSN 0925-3467

Abd Manaf, Mohd Edeerozey (2013) Optical Properties of Cellulose Esters and Applications to Optical Functional Films. In: Pulp production and processing: From papermaking to high-tech products. Smithers Rapra Technology Ltd, United Kingdom, pp. 391-411. ISBN 978-1-84735-633-8

Abd Manaf, Mohd Edeerozey (2013) Optical anisotropy in solution-cast film of cellulose triacetate. Cellulose, 20. pp. 83-96. ISSN 1572-882X

Adibah Haneem, Mohamad Dom and Mohd Rosli, Zulkifli (2013) Development of hydroxyapatite layer on superplastic Ti-6Al-4V for biomaterials applications. Advanced Materials Research. pp. 339-343. ISSN 1022-6680

C

Chua, Kok Yau and Hng, May Ting and Lee, Cher Chia and Thangaraj, Joseph Sahaya Anand (2013) XRD Analysis Of Cu-Al Interconnect Intermetallic Compound In An Annealed Micro-Chip. Advanced Materials Research, 620. pp. 166-172. ISSN 10226680

H

Hambali, Arif and T., Joseph Sahaya Anand and Sivarao, Subramonian (2013) Finite Element Analysis of Conceptual Lumbar Spine for Different Lifting Position. World Applied Sciences Journal, 21. pp. 68-75. ISSN 1818-4952

J

Jariah, Mohamad Juoi and Zulkifli, Mohd Rosli and Toibah, Abd Rahim and Siti Rahmah, Shamsuri (2013) Physical and Mechanical properties of glass composite material made from incinerated scheduled waste slag and SLS waste Glass. Advanced Material Research. pp. 280-288. ISSN 1022-6680

Jeefferie, Abd Razak and Mohamad, Noraiham and Ab Maulod, Hairul Effendy (2013) Processability of Polypropylene-Multiwalled Carbon Nanotubes (PP/MWCNTs) Nanocomposites via Direct Melt Compounding. Journal of Elastomer and Plastics, 45 (3). pp. 239-251. ISSN 0095-2443

Juoi, J.M. and Arudra, D. and Rosli, Z.M. and Hussain, K. and Japper Jaafar , A (2013) Microstructural properties of glass composite material made from incinerated scheduled waste slag and soda lime silicate (SLS) waste glass. Journal Non-Crystalline Solids, 367 (1). pp. 8-13. ISSN 0022-3093

L

Lum, Yip Hing and Shaaban, Azizah and Mitan, Nona Merry Merpati and Dimin @ Mohd Amin, Mohd Fairuz and Mohamad, Noraiham and Abdul Hamid, Nor Nadiah and Se, Sian Meng (2013) Characterization of urea encapsulated by biodegradable starch-PVA-glycerol. Journal of Polymers and the Environment, 21 (4). pp. 1083-1087. ISSN 1566-2543

M

Mohamad, Noraiham and Zainol, Nur Sharafina and ABD RAZAK , JEEFFERIE (2013) MORPHOLOGICAL & MECHANICAL PROPERTIES OF POLYPROPYLENE/EPOXIDIZED NATURAL RUBBER THERMOPLASTIC VULCANIZATES TREATED WITH MALEIC ANHYDRIED-GRAFTED POLYPROPYLENE. In: International Conference on Mechanical Engineering Research, 1-3th July 2013, Bukit Gambang Resort City, Kuantan, Pahang.

Mohamad, Noraiham and Abdul Hamid, Nor Nadiah and ABD RAZAK , JEEFFERIE and Mohd Fairuz, Dimin (2013) EFFECT OF CHITOSAN GELATINIZATION TEMPERATURE ON WATER ABSORPTION AND WATER RETENTION OF CHITOSAN BASED UREA FERTILIZER. In: International Conference on Mechanical Engineering Research, 1-3rd July 2013, Bukit Gambang Resort City, Kuantan, Pahang.

Mohamad, Noraiham and Abdul Hamid, Nor Nadiah and Abd Razak, Jeefferie and Dimin @ Mohd Amin, Mohd Fairuz (2013) Effect of chitosan gelatinization temperature on water absorption and water retention of chitosan-based urea fertilizer. International Journal of Automotive and Mechanical Engineering (IJAME), 8. pp. 1357-1366. ISSN 2229-8649

Mohamad, Noraiham and Abdul Hamid, Nor Nadiah and Abdul Razak, Jeefferie and Dimin @ Mohd Amin, Mohd Fairuz (2013) Effect of chitosan gelatinization temperature on water absorption and water retention of chitosan-based urea fertilizer. International Journal of Automotive and Mechanical Engineering (IJAME), 8. pp. 1357-1366. ISSN 2180-1606

Mohamad, Noraiham and Mahamood, Mazlin Aida and Yaakub, Juliana and Abdul Razak, Jeefferie and Muchtar, Andanastuti and Shueb, Mohammed Iqbal and Kasim, Mohd Shahir and Mohd Abid, Mohd Asyadi Azam and Yaakob, Mohd Yuhazri and Mustafa, Nuzaimah and Toibah, Abd Rahim and Qumrul, Ahsan (2013) FUNCTIONALISATION OF ETHYLENE-PROPYLENE COPOLYMER (EPM) BY MELT GRAFTING OF MALEIC ANHYDRIDE (MAH) USING HIGH SHEAR INTERNAL MIXER. In: International Conference on the Science and Engineering of Materials, 13-14 Nov 2013, Kuala Lumpur, Malaysia.

Mohamad, Noraiham and Zainol, Nur Sharafina and Rahim, Faisal Faris and Ab Maulod, Hairul Effendy and Abd Rahim, Toibah and Shamsuri, Siti Rahmah and Mohd Abid, Mohd Asyadi Azam and Yaakub, Mohd Yuhazri and Abdollah, Mohd Fadzli and Abd Manaf, Mohd Edeerozey (2013) Mechanical and morphological properties of polypropylene/epoxidized natural rubber blends at various mixing ratio. Procedia Engineering . pp. 1-6. ISSN 1877-7058 (Unpublished)

Mohamad, Noraiham and Zainol, Nur Sharafina and YAAKOB, MOHD YUHAZRI and ABD RAZAK , JEEFFERIE (2013) MORPHOLOGICAL AND MECHANICAL PROPERTIES OF POLYPROPYLENE/EPOXIDIZED NATURAL RUBBER THERMOPLASTIC VULCANIZATES TREATED WITH MALEIC ANHYDRIDE-GRAFTED POLYPROPYLENE. International Journal of Automotive and Mechanical Engineering , 8 ((July-). pp. 1305-1315. ISSN 2180-1606 (online) 2229-8649 (print)

Mohamad Juoi, Jariah and Arudra, Dilip and Mohd Rosli, Zulkifli and Abd Rahim, Toibah and Shamsuri, Siti Rahmah and Japper-Jaafar, Azuraien (2013) Physical and mechanical properties of glass composite material made from incinerated scheduled waste slag and SLS waste glass. Advanced Materials Research, 626. pp. 280-288. ISSN 1022-6680

Mohamad Juoi, Jariah and Arudra, Dilip and Mohd Rosli, Zulkifli and Japper-Jaafar, Azuraien and Husain, Kalthom (2013) Microstructural properties of glass composite material made from incinerated scheduled waste slag and soda lime silicate (SLS) waste glass. Journal of Non-Crystalline Solids, 367. pp. 8-13. ISSN 0022-3093

Mohamad Juoi, Jariah and Nazari , Farahani Irna and Mitan, Nona Merry Merpati and Shaaban, Azizah (2013) Rheological Properties of Urea-CaLS Mixture for Urea Fertilizer Granulation. Advanced Materials Research , Vol. 7. pp. 329-332. ISSN 1022-6680

Mohd Abid, Mohd Asyadi Azam (2013) Significant Capacitance Performance of Vertically Aligned Single-Walled Carbon Nanotube Supercapacitor by Varying Potassium Hydroxide Concentration. International Journal of Electrochemical Science (IJES), 8 (3). pp. 3902-3911. ISSN 1452-3981

Mohd Abid, Mohd Asyadi Azam (2013) Towards realization of high performance energy storage device: Nanostructuring CNT electrode. In: Workshop on Advanced Energy Storage Materials & Devices (WAESD), 4-5 July 2013, UPNM, Kuala Lumpur.

Mohd Abid, Mohd Asyadi Azam and Abdul Manaf, Nor Syafira and Bistamam, Mohd Shahril Amin (2013) Development of high performance electrochemical capacitor: A systematic review of electrode fabrication technique based on different carbon materials. ECS Journal of Solid State Science and Technology, 2 (10). M3101-M3119. ISSN 2162-8777

Mohd Abid, Mohd Asyadi Azam and Isomura , Kazuki and Fujiwara, Akihiko and Shimoda, Tatsuya (2013) Direct growth of vertically aligned single-walled CNTs on conducting substrate and its electrochemical performance in ionic liquids. In: International Symposium on Advanced Materials Science, 17 - 18 October 2013, JAIST, Ishikawa, Japan.

Mohd Abid, Mohd Asyadi Azam and Mohd Warikh, Abd Rashid (2013) X-ray and morphological characterization of Al-O thin films used for vertically aligned carbon nanotube growth. Advanced Materials Research. pp. 213-218. ISSN 10226680

Mohd Abid, Mohd Asyadi Azam and RAJA ABDULLAH, RAJA IZAMSHAH and Mohamad, Noraiham and Azizan, Mohd Arif and Abdul Manaf, Nor Syafira (2013) Carbon Based Electrochemical Capacitor in 1M H2SO4 Electrolyte. In: MUCET 2013, 2-3 December 2013, Kuantan.

Mohd Abid, Mohd Asyadi Azam and Rosle, Muhammad Firdaus (2013) Electrochemical Analyses of Carbon Nanotube Based Supercapacitor in 1M LiPF6 Organic Electrolyte. International Journal of Electroactive Materials, 1. pp. 55-59. ISSN 2289-179X

Mohd Abid, Mohd Asyadi Azam and Mohamad, Noraiham and Raja Abdullah, Raja Izamshah (2013) Nanostructuring Ultra-thin Co Films to Active Catalyst Particles for Vertically Aligned Single-Walled CNT Growth. Procedia Engineering , 68. pp. 566-571. ISSN 1877-7058

Mohd Abid, Mohd Asyadi Azam and Abdul Manaf, Nor Syafira and Bistamam, Mohd Shahril Amin and Talib, Elyas (2013) Aligned carbon nanotube from catalytic chemical vapor deposition technique for energy storage device: a review. Ionics, 19 (11). pp. 1455-1476. ISSN 0947-7047 (Print); 1862-0760 (Online)

Mohd Rosli, ZULKIFLI and Joseph Sahaya Anand, T and S., Shariza and Azizah, Shaaban and Sivarao, Subramonian and Radzai, Said and Kamaruzaman, Jusoff and Thiru, S (2013) Optical and Mott-Schottky Studies of Ternary MoSSe Thin Films Synthesized by Electrochemical Route. World Applied Sciences Journal. pp. 60-67. ISSN 1818-4952

Mohd Rosli, ZULKIFLI and yusliza, yusuf and Jariah, Mohamad Juoi and Zainab , Mahamud and Kwan, Wai Loon (2013) Ti6Al4V Surface Hardness Improvement by Duplex Coating. Advanced Materials Research. pp. 370-374. ISSN 1022-6680

Mohd Rosli, z.m.rosli and Kwan, Wai Loon and Jariah, Mohamad Juoi and Nafarizal , Nayan and Zainab , Mahamud and Yusliza, Yusuf (2013) Characterization of TiAlBN Nanocomposite Coating deposited via Radio Frequency Magnetron Sputtering using Single Hot-Pressed Target. Advanced Materials Research, Vol. 626 (2013). pp. 298-301. ISSN 1022-6680

Mohd Rosli, z.m.rosli and Zainab , Mahamud and Jariah, Mohamad Juoi and Nafarizal, Nayan and Kwan, Wai Loon and Yusliza, Yusuf and Hairul Effendy, Maulud (2013) Corrosion behavior of AZ91 Mg-Alloy coated with AlN and TiN in NaCl and Hank’s solution. Advanced Materials Research. pp. 275-279. ISSN 1022-6680

Mohd Rosli, ZULKIFLI and Yusuf, Y. and Juoi, J. M. and Kwan, Wai Loon and Zainab , Mahamud (2013) Effects of Process Temperature and Time on the Properties of Microwave Plasma Nitrided Ti-6Al-4V Alloy. Pertanika J. Sci. & Technol. pp. 45-58. ISSN 0128-7680

S

Se, Sian Meng and Shaaban, Azizah and Mitan, Nona Merry Merpati and Dimin @ Mohd Amin, Mohd Fairuz (2013) Characterization of biochar derived from rubber wood sawdust through slow pyrolysis on surface porosities and functional groups. In: The Malaysian International Tribology Conference 2013, MITC2013, 18-20 November 2013, Kota Kinabalu, Sabah.. (Submitted)

Shaaban, Azizah and Se, Sian Meng and Mohd Fairuz, Dimin and Hamid, Nadiah (2013) SLOW PYROLYSIS AND CHARACTERIZATION OF SURFACE FUNCTIONAL GROUPS FOR BIOCHAR DERIVED FROM RUBBER WOOD SAWDUST. In: 2nd International Conference on Mechanical Engineering Research (ICMER 2013), 1-4 July 2013, Kuantan, Pahang, Malaysia.

Sivarao, Subramonian and S.THIRU,, CHITRAMBALAM and T., Joseph Sahaya Anand and Mariana , Yusof (2013) Establishing a Hybrid Laser Lathing Technology. World Applied Sciences Journal, 21. pp. 53-59. ISSN 1818-4952

T

T., Joseph Sahaya Anand and S., Shariza (2013) Optical Studies of Transition Metal Chalcogenide MoSe2 Thin Films. Far East Journal of Electronics and Communications, 11 (1). pp. 57-66. ISSN 0973-7006

T., Joseph Sahaya Anand and Sivarao, Subramonian and K., Ganesh Kumar (2013) MECHANICAL PROPERTIES OF INTERMETALLIC NICKEL ALUMINIDES (Ni3Al). Far East Journal of Electronics and Communications, 11 (1). pp. 47-56. ISSN 0973-7006

T., Joseph Sahaya Anand and Mohd Zaidan, Abd Aziz (2013) Electro synthesised NiTe2 Thin Films with the Influence of Additives. In: Joint International Conference on Nanoscience, Engineering and Management, 19-21, August, 2013, Penang. (In Press)

T., Joseph Sahaya Anand and Mohd Zaidan, Abd Aziz and S., Shariza (2013) Effect of Additives on Optical Measurements of NiSe2 Thin Films. Procedia Engineering , 53. pp. 555-561. ISSN 1877-7058

T., Joseph Sahaya Anand and Rajes, KM Rajan and Mohd Zaidan , Abdul Aziz (2013) Electrosynthesized NiS2 thin films and their optical and semiconductor studies. Reports in Electrochemistry, 3. pp. 25-29. ISSN 2230-4096

T., Joseph Sahaya Anand and S., Shariza and Z.M., Rosli and Azizah, Shaaban and Sivarao, Subramonian and Mohamad, Radzai Said and S., Thiru (2013) Optical and Mott-Schottky Studies of Ternary MoSSe Thin Films Synthesized by Electrochemical Route. World Applied Sciences Journal, 21. pp. 60-67. ISSN 1818-4952

T., Joseph Sahaya Anand and Sivarao, Subramonian and K., Ganesh Kumar (2013) Mechanical and Chemical Properties of intermetallic Ni3Al for Automotive Body. Current Research in Malaysia (CREAM), 2 (2). pp. 61-72. ISSN 2231–8305

Thangaraj, Joseph Sahaya Anand and Chua, Kok Yau and Jalar, Azman (2013) Micro-structural studies of thermosonic Cu-Al bonding interface. In: Joint International Conference on Nanoscience, Engineering and Management, 19-21 August 2013, Penang. (In Press)

Thangaraj, Joseph Sahaya Anand and Chua, Kok Yau and Yeow, See Leong and Lim, Weng Keat and Hng, May Ting (2013) Microstructural and mechanical analysis of Cu and Au interconnect on various bond pads. Current Applied Physics, 13 (8). pp. 1674-1683. ISSN 1567-1739

Y

YAAKOB, MOHD YUHAZRI and AMIR MOHAMED, KAMARUL and ABDUL HAMID, RAHIMAH and HASOLOAN , HAERY IAN PIETER and YAHAYA, SAIFUDIN HAFIZ (2013) An Experimental Study of Different Thermal Boxes Heated by Solar Thermal Radiation for Hot Water System at Daytime. Applied Mechanics and Materials , 315 (2013). pp. 783-787. ISSN 1662-7482

YAAKOB, MOHD YUHAZRI and AMIR MOHAMED, KAMARUL and HASOLOAN , HAERY IAN PIETER and YAHAYA, SAIFUDIN HAFIZ and RAJA ABDULLAH, RAJA IZAMSHAH (2013) An Experimental Study of Different Thermal Boxes Heated by Solar Thermal Radiation for Hot Water System at Night. Applied Mechanics and Materials , 315 (2013). pp. 788-792. ISSN 1662-7482

Yusuf, Y. and Juoi, J. M. and Rosli, Z. M. and Kwan , W. L. and Mahamud, Z. (2013) Effects of Process Temperature and Time on the Properties of Microwave Plasma Nitrided Ti-6Al-4V Alloy. Pertanika Journal of SCience and Technology, 21 (1). pp. 45-58. ISSN 0128-7680