Items where Author is "Mohamad, Effendi"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Item Type | No Grouping
Number of items: 61.

Article

Mohamad, Effendi and Adiyanto, Okka and Faishal, Muhammad and Jaafar, Roshidah and Ma’ruf, Farid and Anggraeni, Anggi (2022) Application of nordic body map and rapid upper limb assessment for assessing work-related musculoskeletal disorders: A case study in small and medium enterprises. International Journal of Integrated Engineering, 14 (4). pp. 10-19. ISSN 2229-838X

Salleh, Mohd Rizal and Rahman, Irfan ur and Mohamad, Effendi and Nawaz, Rashid and A Rahman, Muhamad Arfauz (2022) Proposing multi-item replenishment model for an inventory management system of Malaysia’s SMEs. Jordan Journal of Mechanical and Industrial Engineering, 16 (3). pp. 395-401. ISSN 1995-6665

Bonifacius, Nurhamdoko and Mohamad, Effendi and Tutuko, Pindo and Yuniawan, Dani and Aini, Nurul and Zhenjiang, Shen and Yamato, Yuya and Sulaksono, Aditya Galih (2022) The pattern of land use integration in historic areas in the CBD zone: Comparative study of space syntax attributes of Malang, Melaka, and Kanazawa. International Review for Spatial Planning and Sustainable Development, 10 (3). pp. 148-169. ISSN 2187-3666

Mohamad, Effendi and Adiyanto, Okka and Abd Razak, Jeefferie (2022) Systematic review of plastic waste as eco-friendly aggregate for sustainable construction. International Journal of Sustainable Construction Engineering and Technology, 13 (2). pp. 243-257. ISSN 2180-3242

Mohamad, Effendi and Ishak, Anuar and Arep @ Ariff, Hambali (2022) The application of six sigma for process control analysis in the Malaysian poultry wastewater treatment. Journal of Ecological Engineering, 23 (5). pp. 116-129. ISSN 2299-8993

Alghafli, Abdulla and Mohamad, Effendi and Ahmed, Al Zaidy (2021) The effect of geometric road conditions on safety performance of Abu Dhabi road intersections. Safety, 7 (4). pp. 1-10. ISSN 2313-576X

Mohamad, Effendi and Abd Rahman, Mohd Soufhwee and Abdul Rahman, Azrul Azwan (2021) Development Of IoT - Enabled Data Analytics Enhance Decision Support System For Lean Manufacturing Process Improvement. Concurrent Engineering Research and Applications, 29 (3). pp. 208-220. ISSN 1063-293X

Alghafli, Abdulla and Mohamad, Effendi and Zaidy, Ahmed Al (2021) The relationship between the elapsed time from the onset of red signal until its violation and traffic accident occurrence in Abu Dhabi, UAE. Safety, 7 (3). pp. 1-11. ISSN 2313-576X

Mohamad, Effendi and Okka Adiyanto and Muhammad Faishal and Jaafar, Roshidah and Mohamad, Nor Akramin and Abd Razak, Jeefferie and Mulaicin, Mutia (2021) Integrated self-report and observational risk assessment for work-related musculoskeletal disorder in small and medium enterprises. Engineering and Applied Science Research, 49 (1). pp. 73-80. ISSN 2539-6161

Mohamad, Effendi and Faishal, Muhammad and Adiyanto, Okka and Abdul Rahman, Azrul Azwan and Jamli, Mohamad Ridzuan and Desviane, Shabilla and Ramawan, Alfian (2021) Safety and quality improvement of street food packaging design using quality function deployment. International Journal of Integrated Engineering, 13 (1). pp. 19-28. ISSN 2229-838X

Mohamad, Effendi and Faishal, Muhammad and Adiyanto, Okka and Jaafar, Roshidah and Abdul Rahman, Azrul Azwan and Jatmiko, Hapsoro Agung and Novera, Ijmal (2021) Integrated approach to customer requirement using quality function deployment and Kansei engineering to improve packaging design. Asia-Pacific Journal of Science and Technology, 26 (2). pp. 1-10. ISSN 2539-6293

Arep @ Ariff, Hambali and Abdul Halim, Muhammad Firdaus and Jaafar, Roshidah and Mohamad, Effendi and Hambali, Ruzy Haryati (2020) Development Of Hygienic Urinal Device Using Integrated Approach. International Journal of Emerging Trends in Engineering Research, 8 (5). pp. 1716-1720. ISSN 2347-3983

Mizobuchi, Akira and Abdul Aziz, Mohd Sanusi and Kasim, Mohd Shahir and Mohamad, Effendi and Salleh, Mohd Rizal and Raja Abdullah, Raja Izamshah and Ishida, Tohru (2019) Helical Micro-Hole Drilling Of Chemically Strengthened Glass Using Capsule-Shaped Electroplated Diamond Tool. Journal of Advanced Manufacturing Technology, 13 (2). pp. 69-81. ISSN 1985-3157

Mohamad, Effendi and A Rahman, Muhamad Arfauz and Salleh, Mohd Rizal and Ibrahim, Mohd Amran and Sulaiman, Mohd Amri (2019) Generation Of A Decision Support System To Enhance The Efficiency Of Lean Manufacturing. Industrial Engineering & Management Systems, 18 (2). pp. 173-181. ISSN 1598-7248

Mohamad, Effendi and Rahmat, Rashitah and Mohamad, Nor Akramin and Jaafar, Roshidah and Yuniawan, Dani and Ito, Teruaki (2019) Improving Electronic Document Control Approval Process Through E-Certification. Journal of Advanced Manufacturing Technology (JAMT), 13 (1). pp. 33-44. ISSN 1985-3157

Mohamad, Effendi and Jiga, Elnie Carina and Rahmat, Rashitah and Azlan, Alya and Abd Rahman, Mohd Soufhwee and Adi, Saptari (2019) Online Booking Systems For Managing Queues At The Road Transport Department. Journal of Industrial Engineering, Scientific Journal on Research and Application of Industrial System, 4 (1). pp. 21-32. ISSN 2503-3670

Mohamad, Effendi and Salleh, Mohd Rizal and A Rahman, Muhamad Arfauz and Sulaiman, Mohd Amri and Ishak, Anuar and Teruaki, Ito (2019) Cleaner Production Value Stream Mapping At A Chromium Plating Plant: A Case Study. International Journal Of Agile Systems And Management (IJASM), 12 (3). pp. 245-260. ISSN 1741-9174

Ishak, Anuar and Mohamad, Effendi and Sukarma, Lukman and Salleh, Mohd Shukor and Salleh, Mohd Rizal and Mohamad, Noraiham and Raja Abdullah, Raja Izamshah and Md Ali, Mohd Amran (2018) Cleaner Production Implementation In An E-Waste Recovery Plant By Using The Value Stream Mapping. Journal Of Advanced Manufacturing Technology (JAMT) , 12 (1 (2)). pp. 55-67. ISSN 1985-3157 (Unpublished)

Sam, Mei Lee and Saptari, Adi and Salleh, Mohd Rizal and Mohamad, Effendi (2018) Comparison Between Linear Programming And Integer Linear Programming: A Review. International Journal Of Mathematics In Operational Research (IJMOR), 13 (1). pp. 91-106. ISSN 1757-5850

A Rahman, Muhamad Arfauz and Mohamad, Nor Rizan and Mustafa, Zaleha and Ismail, Syahriza and Abdul Rahman, Azrul Azwan and Abdullah, Shariman and Mohamad, Effendi and Nordin, Mohd Hisham and Salleh, Mohd Rizal (2018) Design Of Compact Pre-Pregger Machine For In House Production Of Pre-Preg Material. Journal Of Advanced Manufacturing Technology (JAMT) , 12 (1 (2)). pp. 437-449. ISSN 1985-3157

Sulaiman, Mohd Amri and Mat, Siti Asiyah and Razak, Muhammad Shahmi and Ramle, Zuraimi and Mohamad, Effendi and Che Haron, Che Hassan and A Ghani, Jaharah (2018) Performance Of CVD Coated Carbide Tool By Optimizing Machining Parameters During Turning Titanium Alloy Ti-6AL-4V ELI In Flooded Condition. Journal Of Advanced Manufacturing Technology (JAMT) , 12 (1 (2)). pp. 401-412. ISSN 1985-3157

Md Ali, Mohd Amran and Abdullah, Abu and Mohamad, Effendi and Salleh, Mohd Shukor and Hussein, Nur Izan Syahriah and Muhammad, Z. and Dahaman, Shamshulizam (2018) Tensile properties of ternary blends for HDPE/PP/Recycle HDPE in blow moulding process. Journal Of Advanced Manufacturing Technology (JAMT) , 12 (1(2)). pp. 31-41. ISSN 1985-3157

Salleh, Mohd Shukor and Ishak, Anuar and Mohamad, Effendi and Sukarma, Lukman and Mahmood, Azmi B.R. and A Rahman, Muhamad Arfauz and Yahaya, Saifudin Hafiz and Salleh, Mohd Shukor and Sulaiman, Mohd Amri (2017) Cleaner Production Implementation Using Extended Value Stream Mapping For Enhancing The Sustainability Of Lean Manufacturing. Journal of Advanced Manufacturing Technology (JAMT) , 2289-8 (1). pp. 47-60. ISSN 1985-3157

Razak, Muhammad Shahmi and Sulaiman, Mohd Amri and Mat, Siti Asiyah and Ramle, Zuraimi and Mohamad, Effendi and Salleh, Mohd Rizal (2017) The Effect Of Cryogenic Cooling On Surface Roughness Of Titanium Alloy: A Review. Journal Of Advanced Manufacturing Technology (JAMT), 11 (2). pp. 101-114. ISSN 1985-3157

Mohamad Ishak, Nurul Naili and Salleh, Mohd Shukor and Yahaya, Saifudin Hafiz and Mohamad, Effendi and Sulaiman, Mohd Amri (2017) The Effect of Equal Channel Angular Pressing (ECAP) on the Microstructure and Hardness of A356 Aluminium Alloy. Journal Of Advanced Manufacturing Technology (JAMT), 11 (2). pp. 47-57. ISSN 1985-3157

Salleh, Mohd Shukor and Omar, Mohd Zaidi and Alhawari, Khalid Salim and Mohammed, Mohammed Naser and Md Ali, Mohd Amran and Mohamad, Effendi (2016) Microstructural evolution and mechanical properties of thixoformed A319 alloys containing variable amounts of magnesium. Transactions of Nonferrous Metals Society of China, 26. pp. 2029-2042. ISSN 1003-6326

Che Haron, Che Hassan and Sulaiman, Mohd Amri and A Ghani, Jaharah and Kasim, Mohd Shahir and Mohamad, Effendi (2016) Performance Of Carbide Tool In High Speed Turning Of TI-6AL-4V ELI Under Conventional Coolant And Minimal Quantity Lubrication. ARPN Journal Of Engineering And Applied Sciences, 11 (7). pp. 4817-4821. ISSN 1819-6608

Osman, Edynoor and Abd Rashid , Mohd Warikh and Abd Manaf, Mohd Edeerozey and Mohamad, Effendi and Salleh, Mohd Rizal and Ito, Teruaki and Moriga, Toshihiro (2016) Hygrothermal Effect on Mechanical and Thermal Properties of Filament Wound Hybrid Composite. Journal of Advanced Manufacturing Technology (JAMT) . pp. 1-12. ISSN 1985-3157

Saptari, Adi and Sylvester Sabuk, Precilla and Halim, Isa and Mohamad, Effendi and Salleh, Mohd Rizal (2015) The effect of assembly design parameters on assembly time. Journal of Advanced Manufacturing Technology, 9 (1). pp. 78-90. ISSN 1985-3157

Kasim, Mohd Shahir and Atan, Mohamad Hazizan and Che Haron, Che Hassan and A Ghani, Jaharah and Sulaiman, Mohd Amri and Mohamad, Effendi and Mohamad, Minhat and Abu Bakar, Mohd Hadzley and Saedon, Juri (2015) Analysis Of Tool Performance During Ball-End Milling Of Aluminium Alloy 6061-T6. Applied Mechanics and Materials, 761. pp. 318-323. ISSN 1662-7482

Ibrahim, Mohamad Amran and Mohamad, Effendi and Arzmi, Muhammad Hazwan and A Rahman, Muhamad Arfauz and Saptari, Adi and Shibghatullah, Abdul Samad and Sulaiman, Mohd Amri and Md Ali, Mohd Amran (2015) Enhancing efficiency of die exchange process through single minute of exchanging die at a textile manufacturing company in Malaysia. Journal of Applied Sciences. pp. 456-464. ISSN 1812-5654

Md Ali, Mohd Amran and K.M, Faizal and Salleh, Mohd Shukor and Sulaiman, Mohd Amri and Mohamad, Effendi (2015) Design Consideration For Design A Flat And Ring Plastics Part Using Solidworks Software. IOP Conference Series: Materials Science And Engineering, 100 (1). pp. 1-9. ISSN 1757-8981

Raja Abdullah, Raja Izamshah and Yu, Aaron Lung and Mohamad, Effendi and Mohd Abid, Mohd Asyadi 'Azam and Sulaiman, Mohd Amri and Liew, Pay Jun and Abdul Aziz, Mohd Sanusi (2015) Optimization Of Milling Parameter For Untreated And Heat Treated Polyetheretherketones (PEEK) Biomaterials. Applied Mechanics And Materials, 761. pp. 293-297. ISSN 1662-7482

Md Ali, Mohd Amran and Hilmi, Hazwani and Mohd Sani, Siti Salmah and Abdullah, Zulkeflee and Mohamad, Effendi and Liew , Pay Jun (2014) Evaluation of Mechanical Performance of Homopolymer Polypropylene/Kenaf Fibre/ Binder using Full Factorial Method. Advanced Research in Materials Science, 1 (1). pp. 7-13. ISSN 2289-7992

Kasim, Mohd Shahir and Che Haron, Che Hassan and A Ghani, Jaharah and Mohamad, Effendi and Raja Abdullah, Raja Izamshah and Md Ali, Mohd Amran and Saedon, Juri (2014) Multi-Objective Optimization Using Box-Behken Of Response Surface Methodology For High-Speed Machining Of Inconel 718. Applied Mechanics and Materials, 629 (-). pp. 487-492. ISSN 1660-9336

Kasim, Mohd Shahir and Che Haron, Che Hassan and A Ghani, Jaharah and Mohamad, Effendi and Raja Abdullah, Raja Izamshah and Md Ali, Mohd Amran and Saedon, Juri (2014) Multi-Objective Optimization Using Box-Behnken Of Response Surface Methodology For High-Speed Machining Of Inconel 718. Applied Mechanics and Materials, 629. pp. 487-492. ISSN 1662-7482

Mohamad, Effendi and T., Ito and D., Yuniawan and Ibrahim, Mohamad Amran and Saptari, Adi and Kasim, Mohd Shahir and Raja Abdullah, Raja Izamshah and Shibghatullah, Abdul Samad and Md Ali, Mohd Amran (2014) A Proposal Of Muda Indicator Agent To Estimate Lean Manufacturing Verification. Journal Of Advanced Manufacturing Technology, 8 (2). pp. 71-82. ISSN 1985-3157

Mohamad, Effendi and Ito, Teruaki and Yuniawan, Dani and Ibrahim, Mohamad Amran and Saptari, Adi and Kasim, Mohd Shahir and Raja Abdullah, Raja Izamshah and Shibghatullah, Abdul Samad and Md Ali, Mohd Amran (2014) A Proposal Of Muda Indicator Agent To Estimate Lean Manufacturing Verification. Journal of Advanced Manufacturing Technology (JAMT) , 8 (2). pp. 71-82. ISSN 1985-3157

Mohamad, Effendi and Ito, Teruaki and Yuniawan, Dani and Ibrahim, M. A. and Saptari, Adi and Kasim, Mohd Shahir and Raja Abdullah, Raja Izamshah and Shibghatullah, Abdul Samad and Md Ali, Mohd Amran (2014) A proposal of Muda Indicator agent to estimate Lean Manufacturing verification. Journal of Advanced Manufacturing Technology (JAMT) , 8 (2). pp. 71-82. ISSN 1985-3157

Yuniawan, Dani and Teruaki, Ito and Mohamad, Effendi (2013) Calculation of overall equipment effectiveness weight by Taguchi method with simulation. CONCURRENT ENGINEERING: Research and Applications, 21 (4). pp. 296-306. ISSN 1063-293X

Mohamad, Effendi (2013) Characteristic Mapping Of Overall Equipment Effectiveness Elements Through Simulation And The Taguchi Method. Journal of Human Capital Development, 6 (2). pp. 1-11. ISSN 1985-7012

Mohamad, Effendi (2013) Quantifying Benefits Of Lean Manufacturing Tools Implementation With Simulation In Coolant Hose Factory. Journal of Human Capital Development, 6 (2). pp. 13-26. ISSN 1985-7012

Mohamad, Effendi and Salleh, Mohd Rizal (2012) Simulation Study Towards Productivity Improvement for Assembly Line. Journal of Human Capital Development, 5 (2). pp. 59-69. ISSN 1985-7012

Mohamad, Effendi and Sobiren, Norhaslina and Saptari, Adi and Salleh, Mohd Rizal (2009) The Implementation Of Risk Management At Aerospace Manufacturing Company. Journal of Human Capital Development, 2 (1). pp. 25-36. ISSN ISSN: 1985-7012

Mohamad, Effendi and Muhamad, Mohd Razali and Abdullah, Rohana and Adi , Saptari (2008) A Study on the Development of Key Performance Indicators (KPIs) At an Aerospace Manufacturing Company. Journal of Advanced Manufacturing Technology (JAMT) , 2 (2). pp. 1-17. ISSN 1985-3157

Conference or Workshop Item

Md Ali, Mohd Amran and Raja Abdullah, Raja Izamshah and Hussein, Nur Izan Syahriah and Kasim, Mohd Shahir and Sulaiman, Mohd Amri and Salleh, Mohd Rizal and Mohamad, Effendi and Subramonian, Sivarao and Liew, Pay Jun and Abdullah, Zulkeflee (2014) Performance of wire-EDM parameters on machining characteristics of titanium alloy (Ti6Al4V) using Taguchi method. In: Malaysia University Conference Engineering Technology 2015, 10-11 November 2014, Melaka.

Kasim, Mohd Shahir and Sulaiman, Mohd Amri and Mohamad, Effendi and Abu Bakar, Mohd Hadzley and Minhat, Mohamad (2014) Analysis of Tool Performance during Ball-end Milling of Aluminium Alloy 6061-T6. In: iDECON 2014 – International Conference on Design and Concurrent Engineering, 21 - 23 September 2014, Melaka.

Roni Sahroni, Taufik and Kamaruddin, Mohammad Aizrulshah and Kasim, Mohd Shahir and Md Ali, Mohd Amran and Mohamad, Effendi and Ito, Teruaki (2014) Design and optimization of runner and gating systems for permanent mould casting. In: 24th Design Engineering Systems Division JSME Conference Japan Society of Mechanical Engineers, 17-19th September, JSME Conference Japan Society of Mechanical Engineers, .

Mohd Abid, Mohd Asyadi Azam and Bistamam, Mohd Shahril Amin and Abdul Manaf, Nor Syafira and Mohamad, Effendi (2014) Aligned Carbon Nanotube Growth from Chemical Vapor Deposition. In: Design and System Division Conference, 17-19 September 2014, Tokushima University.

Mohamad, Effendi and Teruaki, Ito and Yuniawan, Dani (2013) Lean Manufacturing Tools Training System. In: JSME No.13-205 The 13th Design Engineering Workshop 2013, 28-30 Nov 2013, Kitakyushu, Japan.

Ito, Teruaki and Mohamad, Effendi and Salleh, Mohd Rizal (2013) A Student Mobility Program through Cross Cultural and Technical Exposure. In: JSME No.13-205 The 13th Design Engineering Workshop 2013, 28-30 November 2013, Kitakyushu, Japan.

Yuniawan, Dani and Ito, Teruaki and Mohamad, Effendi (2013) A proposal of total productive maintenance training system. In: JSME No.13-205 The 13th Design Engineering Workshop 2013, 28-30 November 2013, Kitakyushu, Japan.

Mohamad, Effendi and Ito, Teruaki and Yuniawan, Dani (2013) A simulation-based approach to decision support for lean practitioners. In: 20th ISPE International Conference on Concurrent Engineering, 2-6 September 2013, Melbourne , Australia.

Abdullah, Rohana and Mohamad, Effendi and Mohamad, Nor Akramin and Saptari, Adi (2009) Productivity Analysis Towards Lean Manufacturing at a Textile Manufacturing Company. In: Malaysian Technical Universities Conference on Engineering and Technology 2009, 20-22 June 2009, MS Garden Hotel, Kuantan, Pahang.

Wan Mahmood, Wan Hasrulnizzam and Ebrahim, Zuhriah and Mohamad, Effendi (2008) Development of an Office TPM for Lecturer’s Room. In: National Management Conference 2008 (NAMAC 08), 13-14, December 2008, Kuala Terengganu, Malaysia.

Wan Mahmood, Wan Hasrulnizzam and Mohamad, Effendi and Abdullah, Abd Rahman (2008) Enhancement of an Effective Training in Manufacturing Company. In: Knowledge Management International Conference 2008, 10-12 June 2008, Langkawi, Malaysia.

Abdullah, Rohana and Mohamad, Effendi and Muhamad, Mohd Razali (2008) Managing Key Performance Indicators (KPIs): A Case Study at an Aerospace Manufacturing Facility. In: Knowledge Management International Conference 2008, 10-12 June 2008, Langkawi, Malaysia.

Abdullah, Rohana and Saptari, Adi and Mohamad, Nor Akramin and Isa, Halim and Mohamad, Effendi (2008) Simulation Modeling for Balancing and Optimizing a Digital Measuring Device (DMD) Production Line. In: Malaysian Technical Universities Conference 2008, 15-16 March 2008, Putra Palace, Kangar, Perlis.

Mohamad, Effendi and Abdullah, Rohana and Wan Mahmood, Wan Hasrulnizzam (2004) The Level Of Achievement Of Lean Manufacturing Implementation Status Before And After The Development Of KPI's At An Aerospace Manufacturing Company. In: The Seminar Kebangsaan Komunikasi Ke-2, 18-19 Dicember 2004, Pulau Langkawi, Malaysia .

Thesis

Mohamad, Effendi (2007) Lean Manufacturing Implementation : A study On The Development Of Key Performance Indicators (KPIs) At An Aerospace Manufacturing Company. Masters thesis, Coventry University.

Patent

Raja Izamshah Raja Abdullah (2014) A plastic wall tile and method of manufacturing thereof. PI 2014703490.

This list was generated on Fri Mar 29 21:04:29 2024 +08.