Items where Division is "Library > Tesis > FKM" and Year is 2018

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Jump to: A | B | I | J | K | M | N | R | S | T
Number of items: 22.

A

Abdul Kadir, Faizul Akmar (2018) Vehicle Speed Control Using MRAC PID Strategy For Gradient Disturbance Rejection. Doctoral thesis, UTeM.

Ahmed Alqadhi, Ahmed Abdullah (2018) Design And Development Of An Optimized Mixed Mode Solar Dryer. Masters thesis, Universiti Teknikal Malaysia Melaka.

Almajdup, Salleh A.A (2018) Design Of a PV-Diesel Hybrid System With Unreliable Grid Connection In Kampung LB Johnson Village, Malaysia. Masters thesis, Universiti Teknikal Malaysia Melaka.

B

Bairan, Aninorbaniyah (2018) Effect Of Multiwall Carbon Nanotube Loading On Multi Filler Polymer Composite As Bipolar Plate. Masters thesis, Universiti Teknikal Malaysia Melaka.

I

Ismail, Mohammad Hazrin (2018) Conversion Technique From 2D To 3D Model For A Shape-Changing Aircraft Slat Mechanism. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ismail, Norhisham (2018) Development Of A Vibration Based Electromagnetic Energy Harvester (EEH) Using Graphene Silver Conductive Direct-Write Process For Automotive Thermal-Sensor. Masters thesis, UTeM.

J

Jamaludin, Mohd Zaini (2018) Performance And Emissions Study Of A Single Cylinder CI Engine Using Castor Oil Biodiesel. Masters thesis, Universiti Teknikal Malaysia Melaka.

K

Khalaf, Mohammed Oudah (2018) A Computational Fluid Dynamics (CFD) Study Of An Airflow In A Single Storey Building Integrated With A Combined System Of Wind Catcher And Solar Chimney. Masters thesis, UTeM.

M

Masron, Farhana (2018) High Electrical Conductivity Bipolar Plate Using Stannum/Graphite Polymer Composite. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mazlan, Siti Nur Humaira (2018) Improvement On Mechanical Properties And Study Of Manufacturability Of Printed Part Fabricated Via Open Source 3D Printer. Masters thesis, Universiti Teknikal Malaysia Melaka.

Md Yusuf, Muhammad Yusri (2018) Investigation On The Effect Of Multi Filler Loading In Graphite-Polypropylene Composite As Bipolar Plate. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Amman, Rosmia (2018) Preceding Deformation Effects On The Crush Response Of The Circular Cup. Masters thesis, Universiti Teknikal Malaysia Melaka.

Musa, Masjuri (2018) The Influence Of Blade Parameters On The Performance Of Propeller Pico Hydro Turbine For Rural Electrification. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

N

Nasir, Nurulfazielah (2018) Effect Of Pore-forming Agents In Macroporous Ceramic Fabrication As Carbon Dioxide Adsorption. Masters thesis, Universiti Teknikal Malaysia Melaka.

Norazman, Farhaneem (2018) Effect Of Acid Treated Biochar On Urea Fertilizer For Retaining Ammonium And Nitrate Ions In Soil. Masters thesis, Universiti Teknikal Malaysia Melaka.

R

Ramli, Siti Nur Rabiatutadawiah (2018) Mechanical Performance Of Pineapple Leaf Fibre Reinforced Polylactic Acid Biocomposites. Masters thesis, Universiti Teknikal Malaysia Melaka.

Rosli, Nor Ana (2018) Design, Development And Performance Of A Low Cost Three-Dimensional Metal Printer. Masters thesis, Universiti Teknikal Malaysia Melaka.

Rshieh, Malik Raihan (2018) Analysis Of Energy Usage Of The Library Building In UTeM Main Campus. Masters thesis, UTeM.

S

Sabaruddin, Saiful Akmal (2018) Modelling And Simulation Of Water-Based Hydraulic Hybrid Driveline. Masters thesis, Universiti Teknikal Malaysia Melaka.

Sehen, Mohanad Sabri (2018) Energy Performance Of Rapid Bus Route. Masters thesis, UTeM.

Syahril, Ilham Hadi (2018) Matching Plate Design Technique For PZT Type Lamb Wave Transducers. Masters thesis, Universiti Teknikal Malaysia Melaka.

T

Tan, Chee Nian (2018) A Fault Diagnosis Expert System On Building Air Conditioning System For Construction 4.0. Masters thesis, Universiti Teknikal Malaysia Melaka.

This list was generated on Thu Aug 5 14:32:40 2021 +08.