Preparation Of Graphene/Molybdenum Disulfide Based Electrodes And Its Electrochemical Performance In Supercapacitors

Raja Seman, Raja Noor Amalina (2019) Preparation Of Graphene/Molybdenum Disulfide Based Electrodes And Its Electrochemical Performance In Supercapacitors. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

[img] Text (24 Pages)
Preparation Of Graphenemolybdenum Disulfide Based Electrodes And Its Electrochemical Performance In Supercapacitors.pdf - Submitted Version

Download (731kB)
[img] Text (Full Text)
Preparation Of Graphenemolybdenum Disulfide Based Electrodes And Its Electrochemical Performance In Supercapacitors.pdf - Submitted Version
Restricted to Registered users only

Download (44MB)

Abstract

Supercapacitor is highly promising energy device due to its electrical charge storage performance and significant lifecycle ability. Construction of the supercapacitor cell especially its electrode fabrication is critical to ensure great application performance. The purpose of this research is to fabricate the molybdenum disulfide (MoS2), graphene and G/MoS2 hybrid electrode and their usage as symmetric and asymmetric supercapacitors. The electrode was prepared by using a simple and facile slurry technique. By this, XRD was used to analyze the crystal phase and structure of the as-prepared graphene, MoS2, and G/ MoS2 hybrid. The peaks at 14.3°, 33.8°, and 57.5° are attributed to the (002), (100), and (110) plane of MoS2 crystal. From Raman spectroscopy shows the characteristic peaks of graphene (D, G and 2D) and MoS2 (E12g band at 377 cm-1 and A1g band at 403 cm-1) are retained in the Raman spectra of G/MoS2 which can confirm the fact that the hybrid of G/MoS2 is composed of MoS2 and graphene. Next, the XPS analysis was carried out to deduce the exact elemental composition of the G/MoS2. The full scan of the G/MoS2 gives the characteristic peaks for Mo 3d, S 2p, C ls and 0 ls with their corresponding binding energies. The morphologies and microstructures of the MoS2, graphene and G/MoS2 are systematically characterized by FESEM observation. The high resolution of FESEM image further reveals that the MoS2 structures are constructed with layers of nanosheets. Meanwhile, FESEM image of graphene sheets illustrating the uniformly distributed of graphene into the Ni foam. Also, the inclusion of MoS2 nanosheets resulted in a rough surface, logically due to co-stacking of MoS2 nanosheets over the graphene nanosheets. Further, the morphology of the G/MoS2 was examined by TEM and reveals the crystal lattice structure of MoS2 and graphene in G/MoS2. The interlayer spacing of MoS2 in the hybrid were estimated to be -0.63 nm, which can be indexed to their (002) lattice planes of hexagonal phase of MoS2. Regardless of the difference in electrode being used, cyclic voltammetry (CV) analysis from the supercapacitor depicted a relatively good specific gravimetric capacitance (Csp) and rate capability performance. A nearly rectangular-shaped CV curve was observed even at high scan rate. Besides, from the charge-discharge measurement, the symmetrical triangular curves reveal that there is no IR drops or voltage drops because oflow internal resistance in the electrodes. Also, the electrode shows excellent discharge behavior and good capacitance retention of up to 10,000 cycles. Thus, this 2D heterostructures may provide excellent rate capabilities, high capacitance, and long lifecycle energy device. This is very promising for the development of high energy and high power density of device for multi-scale applications or industries.

Item Type: Thesis (Doctoral)
Uncontrolled Keywords: Molybdenum disulfide, Supercapacitors Materials, Graphene/Molybdenum Disulfide, Electrodes, Electrochemical Performance
Subjects: T Technology > T Technology (General)
T Technology > TK Electrical engineering. Electronics Nuclear engineering
Divisions: Library > Tesis > FKP
Depositing User: F Haslinda Harun
Date Deposited: 05 Jan 2021 09:19
Last Modified: 15 Mar 2022 14:48
URI: http://eprints.utem.edu.my/id/eprint/24857
Statistic Details: View Download Statistic

Actions (login required)

View Item View Item