Items where Author is "Abu Bakar, Mohd Hadzley"

Paijan, Lailatul Harina and Mamat, Mohd Fauzi and Abu Bakar, Mohd Hadzley and Abd Aziz, Mohd Syafiq (2024) Influence of thermal input on microstructure and wear properties of surface alloyed DSS with SiC by TIG melting techniques. Malaysian Journal of Microscopy, 20 (1). pp. 123-133. ISSN 1823-7010

Ali, Mohd Basri and Zainuddin, Hikmah and Muhammad Said, Nurlaela and Zakaria, Kamarul Ariffin and Dhar Malingam, Sivakumar and Abu Bakar, Mohd Hadzley and Tamin, Nor Fauzi (2024) Impact strain signal characteristics of al and mg under instrumented charpy test. Journal of Advanced Research in Applied Sciences and Engineering Technology, 42 (2). pp. 13-26. ISSN 2462-1943

Ali, Mohd Basri and Zainuddin, Hikmah and Zakaria, Kamarul Ariffin and Paijan, Lailatul Harina and Mamat, Mohd Fauzi and Abu Bakar, Mohd Hadzley (2024) Investigation of impact properties under instrumented Charpy test. Journal of Engineering and Technological Sciences, 56 (3). pp. 329-339. ISSN 2337-5779

Paijan, Lailatul Harina and Ali, Mohd Basri and Mamat, Mohd Fauzi and Abu Bakar, Mohd Hadzley and Osman, Mohd Hairizal and Abd Maleque and Asari, Mohd Rashidi (2022) Taguchi optimization of hardness properties and study the effect on microstructural features of SiC reinforced composite coating duplex stainless steel. Malaysian Journal of Microscopy, 18 (2). pp. 189-200. ISSN 1823-7010

Azhar, Anis Afuza and Abu Bakar, Mohd Hadzley and Haji Azlan, Umar Al-Amani and TAMIN, NORFAUZI and Mohd Rashid, Mohd Fairuz and Herawan, Safarudin Gazali (2022) WEAR PERFORMANCE OF ALUMINA-ZIRCONIA, ALUMINA-ZIRCONIA-CHROMIA AND ALUMINA-ZIRCONIA-MAGNESIA IN MACHINING AISI 1045 STEEL. JURNAL TRIBOLOGI, 32. pp. 79-91. ISSN 2289-7232

Paijan, Lailatul Harina and Mamat, Mohd Fauzi and Abu Bakar, Mohd Hadzley and Maleque, Abd (2022) Effects of temperature on the formation of nitride surface layer via thermochemical gaseous nitriding process. Malaysian Journal of Microscopy, 18 (2). pp. 122-131. ISSN 1823 7010

Abu Bakar, Mohd Hadzley and Ab Wahab, Norfariza and Azhar, Anis Afuza and Adam, Abdul Aziz and Herawan, Safarudin Gazali and Thongkaew, Kunlapat and Fairuz, M. R. (2021) Effect of laser parameters on the surface cleaning of galvanised steel by laser engraving process. International Journal of Nanoelectronics and Materials, 14 (ISI). pp. 123-134. ISSN 1985-5761

Nassiruddin, Muhammad Amirul Adli and Ab Wahab, Norfariza and Abdul Razak, Muhamad Harezul and Azizzi, Muhammad Ridzuan and Abu Bakar, Mohd Hadzley and Sasahara, Hiroyuki (2021) Micro-influence of vacuum block positions on machinability of acrylic using hybrid vacuum clamping system. International Journal of Nanoelectronics and Materials, 14 (SI). pp. 145-158. ISSN 1985-5761

Ali, Mohd Basri and Abu Bakar, Mohd Hadzley and Tamin, Nor Fauzi and Zakaria, Kamarul Ariffin and Dhar Malingam, Sivakumar and Tan, Kevin Wei Chun and Ayop Azmi, Faiz Aswad (2021) Automatic sliding gate system using tap water pressure. Evergreen, 8 (2). pp. 408-413. ISSN 2189-0420

Kasim, Mohd Shahir and Husshini, Nur Husnina Najeah and Raja Abdullah, Raja Izamshah and Mohd Shahrim, Mohammad Shah All Hafiz and W. Mohamad, W Noor Fatihah and Md Ali, Mohd Amran and Abu Bakar, Mohd Hadzley (2021) Current Summary Of Surface Integrity When Machining Inconel 718 Under Different Cooling And Lubrication Strategies. Jurnal Tribologi, 29. pp. 144-155. ISSN 2289-7232

Md Ali, Mohd Amran and Mohd Ali, Noorfa Idayu and Abdullah, Zulkeflee and Subramonian, Sivarao and Abdul Aziz, Mohd Sanusi and Wan Muhammad, ‪Wan Nur Azrina and Abu Bakar, Mohd Hadzley and Wakhi Anuar, Nur Farah Bazilah (2021) Fill Time Optimization Analysis In Flow Simulation Of Injection Molding Using Response Surface Method. Malaysian Journal on Composites Science and Manufacturing, 4 (1). pp. 28-39. ISSN 2716-6945

Mustafa, Zaleha and Idrus, Noriqman Hakimi and Abu Bakar, Mohd Hadzley and Mohamad Yatim, Norazlina and Dhar Malingam, Sivakumar and Sheikh Md Fadzullah, Siti Hajar and Anjang Ab Rahman, Aslina and Thongkaew, Kunlapat (2020) Optimization of drilling process parameters on delamination factor of Jute reinforced unsaturated polyester composite using Box-Behnken design of experiment. Journal of Mechanical Engineering and Sciences (JMES), 14 (1). pp. 6295-6303. ISSN 2289-4659

Abu Bakar, Mohd Hadzley and Tamin, Nor Fauzi and Azhar, Anis Afuza and Mokhtar, Muhammad Faiz and Hamed, Muhammad Fitri Naim and Azlan, Umar Al-Amani (2019) Fabrication And Machining Performance Of Ceramic Cutting Tool Based On The Al2O3-ZrO2-Cr2O3 Compositions. Journal of Materials Research and Technology, 8 (6). pp. 5114-5123. ISSN 2238-7854

Abu Bakar, Mohd Hadzley and Tamin, Nor Fauzi and Al-Amani, Umar and Azhar, Anis Afuza and Mokhtar, Muhammad Faiz and Hamed, Muhammad Fitri Naim (2019) Effect Of Sintering Temperature On Density, Hardness And Tool Wear For Alumina-Zirconia Cutting Tool. Journal of Mechanical Engineering and Sciences, 13 (1). pp. 4648-4660. ISSN 2289-4659

Osman, Mohd Hairizal and Mokhtar, Muhammad Faiz and Abu Bakar, Mohd Hadzley and Hamed, Muhammad Fitri Naim and Tamin, Nor Fauzi and Azlan, Umar Al-Amani and Aziz, A. A. and Noorazizi, S. (2019) Effect Of Hydraulic Pressure On Hardness, Density, Tool Wear And Surface Roughness In The Fabrication Of Alumina Based Cutting Tool. Journal of Advanced Manufacturing Technology, 13 (1). pp. 23-37. ISSN 2289-8107

Abu Bakar, Mohd Hadzley and Abdul Manap, Muhamad Naim Fahmi and Tamin, Nor Fauzi and Azhar, Anis Afuza and Raja Abdullah, Raja Izamshah and Kasim, Mohd Shahir and Md Ali, Mohd Amran and Shamsudin, Noorazizi and Mohamad Raffi, Nurul Fatin (2019) Surface Integrity Study For FC300 Cast Iron Using TiAIN Ball End Mill. Jurnal Tribologi, 21. pp. 35-46. ISSN 2289-7232

Kasim, Mohd Shahir and Che Haron, Che Hassan and A Ghani, Jaharah and Raja Abdullah, Raja Izamshah and Akmal, Suriati and Md Ali, Mohd Amran and Abu Bakar, Mohd Hadzley and Salleh, Mohd Shukor (2018) Investigation Of Tangential Force On Ball Nose Rake Face During High-Speed Milling Of Inconel 718. Advances In Materials And Processing Technologies, 4 (3). pp. 1-7. ISSN 2374-0698

Abu Bakar, Mohd Hadzley and Fahmi, Naim and Mokhtar, Faiz and Tamin, Nor Fauzi and Azlan, Umar Al-Amani and Adam, Abdul Aziz and Raja Abdullah, Raja Izamshah and Kasim, Mohd Shahir (2018) Fabrication And Machining Performance Of Powder Compacted Alumina Based Cutting Tool. MATEC Web Of Conferences, 150. pp. 1-5. ISSN 2261-236X

Md Ali, Mohd Amran and Mohd Ali, Noorfa Idayu and Abdullah, Zulkeflee and Abu Bakar, Mohd Hadzley and Subramonian, Sivarao and Abdul Aziz, Mohd Sanusi and Abdullah, Abu (2017) Interchangeable Core And Cavity Plates For Two-Plate Family Injection Mould. Journal Of Mechanical Engineering And Sciences (JMES), 11 (3). pp. 2815-2824. ISSN 2289-4659

Kasim, Mohd Shahir and Atan, Mohamad Hazizan and Che Haron, Che Hassan and A Ghani, Jaharah and Sulaiman, Mohd Amri and Mohamad, Effendi and Mohamad, Minhat and Abu Bakar, Mohd Hadzley and Saedon, Juri (2015) Analysis Of Tool Performance During Ball-End Milling Of Aluminium Alloy 6061-T6. Applied Mechanics and Materials, 761. pp. 318-323. ISSN 1662-7482

Raja Izamshah Raja Abdullah (2014) A plastic wall tile and method of manufacturing thereof. PI 2014703490.

Md Ali, Mohd Amran and Laily, Suraya and Fatin, Aisyah and Hussein, Nur Izan Syahriah and Muhamad, Mohd Razali and Manshoor, Bukhari and Mohd Amri, Lajis and RAJA ABDULLAH, RAJA IZAMSHAH and Abu Bakar, Mohd Hadzley and Taufik, Roni Sahroni (2014) The Performance of Brass Electrode on Material Removal for Aluminium Composite in EDM Die-Sinking. Applied Mechanics and Materials, 660. pp. 43-47. ISSN 1662-7482

Kasim, Mohd Shahir and Sulaiman, Mohd Amri and Mohamad, Effendi and Abu Bakar, Mohd Hadzley and Minhat, Mohamad (2014) Analysis of Tool Performance during Ball-end Milling of Aluminium Alloy 6061-T6. In: iDECON 2014 – International Conference on Design and Concurrent Engineering, 21 - 23 September 2014, Melaka.

Md Ali, Mohd Amran and Salmah, Siti and Zaki, Mohd and RAJA ABDULLAH, RAJA IZAMSHAH and Abu Bakar, Mohd Hadzley and Subramonian, Sivarao and Kasim, Mohd Shahir and Sulaiman, Mohd Amri (2014) The Effect of Pressure on Warpage of Dumbbell Plastic Part in Injection Moulding Machine. Advanced Materials Research, 903. pp. 61-66. ISSN 1662-8985

Raja Abdullah, Raja Izamshah and Hassan, Zulhairy and Kasim, Mohd Shahir and Abu Bakar, Mohd Hadzley and Md Ali, Mohd Amran and Sulaiman, Mohd Amri and Subramonian, Sivarao (2014) Cutter Path Strategies For Shoulder Milling Of Thin Deflecting Walls. Advanced Materials Research, 903 (-). pp. 175-180. ISSN 1662-8985

Md Ali, Mohd Amran and Laily, Suraya and Nor, Halida Ilyani Kamarudin and Hussein, Nur Izan Syahriah and Muhamad, Mohd Razali and Manshoor, Bukhari and Lajis, Mohd Amri and Raja Izamshah , Raja Abdullah and Abu Bakar, Mohd Hadzley and Taufik, Roni Sahroni (2014) The Effect of EDM Die-Sinking Parameters on Material Characteristic for Aluminium Composite Using Tungsten Copper Electrode. Applied Mechanics and Materials, 465-466. pp. 1214-1218. ISSN 1662-7482

Md Ali, Mohd Amran and Laily, Suraya and Kamarudin, NOR Halida Ilyani and Hussein, Nur Izan Syahriah and Mohd Razali, Muhamad and Bukhari, Mashoor and Lajis, Mohd Amri and RAJA ABDULLAH, RAJA IZAMSHAH and Abu Bakar, Mohd Hadzley and Taufik, Roni Sahroni (2014) The Effect of EDM Die-sinking Parameters on Material Characteristic for Aluminium Composite Using Tungsten Copper Electrode. Applied Mechanics and Materials. pp. 1214-1218. ISSN 1662-7482

Raja Abdullah, Raja Izamshah and Mohd Nawawi, Nurul Husna and Abu Bakar, Mohd Hadzley and Md Ali, Mohd Amran and Kasim, Mohd Shahir and Sulaiman, Mohd Amri (2014) Effects Of Cutter Geometrical Features On Machining Polyetheretherketones (PEEK) Engineering Plastic. Journal of Mechanical Engineering and Sciences (JMES), 6 (-). pp. 863-872. ISSN 2289-4659

Abu Bakar, Mohd Hadzley and Ahmad, Siti Sarah Nadia and Raja Abdullah, Raja Izamshah and Md Ali, Mohd Amran and Kasim, Mohd Shahir and Sulaiman, Mohd Amri and Mohamad Raffi, Nurul Fatin (2014) Evaluation Of The Surface Integrity When Machining LM6 Aluminum Metal Matrix Composites Using Coated And Uncoated Carbide Cutting Tools. Applied Mechanics and Materials, 465-16 (-). pp. 1049-1053. ISSN 1660-9336

Abu Bakar, Mohd Hadzley and Raja Abdullah, Raja Izamshah and Md Ali, Mohd Amran and Kasim, Mohd Shahir and Sulaiman, Mohd Amri and Ahmad, Siti Sarah Nadia and Mohamad Raffi, Nurul Fatin (2014) Surface Integrity Of LM6 Aluminum Metal Matrix Composite When Machined With High Speed Steel And Uncoated Carbide Cutting Tools. Journal of Mechanical Engineering and Sciences (JMES), 6 (-). pp. 854-862. ISSN 2289-4659

Abu Bakar, Mohd Hadzley and Raja Abdullah, Raja Izamshah and Md Ali, Mohd Amran and Yusoff, Wan Azahar and Wijeyesekera, Devapriya and Hasanah, Tuan Noor (2014) Surface Observation Of Hollow Tube Mat After Sintering And Cutting Process. International Symposium on Research in Innovation and Sustainability 2014, 26 (5). pp. 1895-1898. ISSN 1013-5316

Laily, Suraya and Md Ali, Mohd Amran and Nur Izan Syahriah, Hussein and Mohd Razali, Muhamad and Manshoor, Bukhari and Mohd Amri, Lajis and Raja Izamshah , Raja Abdullah and Abu Bakar, Mohd Hadzley and Taufik , Roni Sahroni (2014) TAGUCHI METHOD PREDICTION OF EDM DIE-SINKING PARAMETERS ON SURFACE INTEGRITY FOR ALUMINIUM COMPOSITE USING COPPER ELECTRODE. Sci.Int.(Lahore), 26 (4). pp. 1455-1458. ISSN ISSN 1013-5316; CODEN: SINTE 8

Md Ali, Mohd Amran and Salmah, Siti and Zolkarnain, Marjom and Umar , Al-amani and RAJA ABDULLAH, RAJA IZAMSHAH and Abu Bakar, Mohd Hadzley and Zulkeflee, Abdullah and Abdul Aziz, Mohd Sanusi (2014) WARPAGE ANALYSIS VERIFICATION BETWEEN SIMULATION AND EXPERIMENTAL OF DUMBBELL PLASTIC PART IN THE INJECTION MOULDING PROCESS. Sci.Int.(Lahore), 26 (4). pp. 1575-1579. ISSN ISSN 1013-5316

Md Ali, Mohd Amran and Mohd Sani, Siti Salmah and Mohd, Zaki and RAJA ABDULLAH, RAJA IZAMSHAH and Abu Bakar, Mohd Hadzley and Subramonian, Sivarao and Kasim, Mohd Shahir and Sulaiman, Mohd Amri (2014) The effect of pressure on warpage of dumbbell plastic part in injection moulding machine. Applied Mechanics and Materials, 529. pp. 61-66. ISSN 1662-7482.

RAJA ABDULLAH, RAJA IZAMSHAH and YAAKOB, MOHD YUHAZRI and Abu Bakar, Mohd Hadzley and Md Ali, Mohd Amran and Subramonian, Sivarao (2013) Effects of End Mill Helix Angle on Accuracy for Machining Thin-Rib Aerospace Component. Applied Mechanics and Materials , 315 (2013). pp. 773-777. ISSN 1662-7482

Abu Bakar, Mohd Hadzley and Raja Abdullah, Raja Izamshah and Ahmad, Siti Sarah Madia and Mohamad Raffi, Nurul Fatin (2013) Finite Element Model of Machining with High Pressure Coolant for Ti- 6Al-4V alloy. Procedia Engineering, 53. pp. 624-631. ISSN 1877-7058

Abu Bakar, Mohd Hadzley and Raja Abdullah, Raja Izamshah and Md. Ali, Mohd Amran and Jusoff, Kamaruzzaman and Sivarao, Subramonian and Ariff, Hambali and Hussein, Nur Izan Syahriah and Wan Mahmood, Wan Hassrulnizzam and Abdullah, Abu and Yusoff, Marianna and Shamshiri, Meysam (2013) Machining Performance of Ti-6Al-4V Titanium Alloy Assisted by High Pressure Waterjet. World Applied Sciences Journal, 21. pp. 98-104. ISSN 1818-4952

Wan Hasrulnizzam , Wan Mahmood and Ab Rahman, Mohd Nizam and Md Deros, Baba and Jusoff, Kamaruzzaman and Adi, Saptari and Zuhriah, Ebrahim and Abu Bakar, Mohd Hadzley and Sivarao, Subramonian and Jano, Zanariah (2013) Manufacturing Performance in Green Supply Chain Management. World Applied Sciences Journal. pp. 76-84. ISSN 1818-4952

Wan Mahmood, Wan Hasrulnizzam and Ebrahim, Zuhriah and Saptari, Adi and Mohamed Sultan, Al Amin and Abu Bakar, Mohd Hadzley and Subramonian, Sivarao and Ab Rahman, Mohd Nizam and Md Deros, Baba and Jusoff, Kamaruzaman and Jano, Zanariah (2013) Manufacturing performance in green supply chain management. World Applied Sciences Journal 21(Special Issue of Engineering and Technology). pp. 76-84. ISSN 1818-4952

Sivarao, Subramonian and S., Thiru and Jusoff, Kamaruzzaman and Azizah, Shaaban and Mariana, Yusoff and Jano, Zanariah and Yuhazri, Yaakob and HASOLOAN , HAERY IAN PIETER and Abu Bakar, Mohd Hadzley and Raja, Izamshah and Hussein, Nur Izan Syahriah and Mohd Amran, Md Ali and Taufik, , and Wahyono Sapto, Widodo and Tan, CheeFai and Sivakumar, Dhar Malingam (2013) Modelling of CO2 Laser Materials Processing by Networked Neuro-Dimension Fuzzy Intelligent System. Australian Journal of Basic and Applied Sciences, 7 (3). pp. 35-45. ISSN 1991-8178

Abu Bakar, Mohd Hadzley and Raja Abdullah, Raja Izamshah and Ahmad, Siti Sarah Nadia and Mohammad Raffi, Nurul Fatin (2012) Finite Element Model of Machining with High Pressure Coolant for Ti-6Al-4V alloy. Proceedings of Malaysian Technical Universities Conference on Engineering and Technology (MUCET) 2012. pp. 295-300. ISSN 978-967-5415-49-4

Raja, Izamshah and Abu Bakar, Mohd Hadzley and Mohd , amran and Sivarao, Subramonian (2012) Effects of End Mill Clearance Angle on Surface Error for Machining Low Rigidity Aerospace Structure Component. Universiti Teknikal Malaysia Melaka, pp. 308-312.

Md Ali, Mohd Amran and Raja, Izamshah and Abu Bakar, Mohd Hadzley and Sivarao, Subramonian and Hussein, Nur Izan Syahriah (2012) Mechanical Properties of Polypropylene Composites Containing Polymer Fibers. In: International Conference on Design and Concurrent Engineering, iDECON2012. Universiti Teknikal Malaysia Melaka, pp. 239-242. ISBN 978-967-0257-16-7