Items where Author is "Ali, Mohd Basri"

Article

Zainuddin, Hikmah and Ali, Mohd Basri (2024) Impact energy in heat-treated aluminium alloy 6061 and 7075. ARPN Journal Of Engineering And Applied Sciences, 19 (8). pp. 473-478. ISSN 1819-6608

Ali, Mohd Basri and Zainuddin, Hikmah and Muhammad Said, Nurlaela and Zakaria, Kamarul Ariffin and Dhar Malingam, Sivakumar and Abu Bakar, Mohd Hadzley and Tamin, Nor Fauzi (2024) Impact strain signal characteristics of al and mg under instrumented charpy test. Journal of Advanced Research in Applied Sciences and Engineering Technology, 42 (2). pp. 13-26. ISSN 2462-1943

Ali, Mohd Basri and Zainuddin, Hikmah and Zakaria, Kamarul Ariffin and Paijan, Lailatul Harina and Mamat, Mohd Fauzi and Abu Bakar, Mohd Hadzley (2024) Investigation of impact properties under instrumented Charpy test. Journal of Engineering and Technological Sciences, 56 (3). pp. 329-339. ISSN 2337-5779

Zakaria, Kamarul Ariffin and Tar, Vishaldeep and Yusuff, Mohd Asri and Roseli, Adnan and Ali, Mohd Basri and Tajul Arifin, Ahmad Mubarak (2023) Effect of weight percentage on physical and mechanical properties of coconut shell reinforced polymer composite. ARPN Journal of Engineering and Applied Sciences, 18 (17). pp. 2051-2057. ISSN 1819-6608

Paijan, Lailatul Harina and Ali, Mohd Basri and Mamat, Mohd Fauzi and Abu Bakar, Mohd Hadzley and Osman, Mohd Hairizal and Abd Maleque and Asari, Mohd Rashidi (2022) Taguchi optimization of hardness properties and study the effect on microstructural features of SiC reinforced composite coating duplex stainless steel. Malaysian Journal of Microscopy, 18 (2). pp. 189-200. ISSN 1823-7010

Ali, Mohd Basri and Abu Bakar, Mohd Hadzley and Tamin, Nor Fauzi and Zakaria, Kamarul Ariffin and Dhar Malingam, Sivakumar and Tan, Kevin Wei Chun and Ayop Azmi, Faiz Aswad (2021) Automatic sliding gate system using tap water pressure. Evergreen, 8 (2). pp. 408-413. ISSN 2189-0420

Ab Ghani, Ahmad Fuad and Ali, Mohd Basri and Dhar Malingam, Sivakumar and Mahmud, Jamaluddin (2020) Digital Image Correlation (DIC) technique in measuring strain using opensource platform Ncorr. Journal of Advanced Research in Applied Mechanics, 26 (1). pp. 10-21. ISSN 2289-7895

Dhar Malingam, Sivakumar and Ng, Lin Feng and Subramaniam, Kathiravan and Selamat, Mohd Zulkefli and Ali, Mohd Basri and Bapokutty, Omar (2019) The influence of fibre stacking configurations on the indentation behaviour of pineapple leaf / glass fibre reinforced hybrid composites. Defence S and T Technical Bulletin, 12 (1). pp. 113-123. ISSN 1985-6571

Dhar Malingam, Sivakumar and Subramaniam, Kathiravan and Ng, Lin Feng and Ali, Mohd Basri and Selamat, Mohd Zulkefli and Bapokutty, Omar and Subramonian, Sivarao (2018) Experimental investigation on Charpy impact response of kenaf bast fibre reinforced metal laminate system. ARPN Journal of Engineering and Applied Sciences, 13 (3). pp. 822-827. ISSN 1819-6608

Ali, Mohd Basri and Sugumar, Dharmalingam and Shafie, Azhar and Mohd Daud, Mohd Ahadlin and Zakaria, Kamarul Ariffin and Abd Latif, Mohd Juzaila (2018) Implementation Of Automation Process In Generating Cad Model For Rim Wheel. ARPN Journal Of Engineering And Applied Sciences, 13 (2). pp. 594-598. ISSN 1819-6608

Ad Suhadak, Fadrah Hanim and Zakaria, Kamarul Ariffin and Ali, Mohd Basri and Yusuff, Mohd Asri (2018) Stress analysis of automobile steering knuckle using finite element method. International Journal Of Engineering & Technology, 7 (317). pp. 28-30. ISSN 2227-524X

Ad Suhadak, Fadrah Hanim and Zakaria, Kamarul Ariffin and Ali, Mohd Basri and Yusuff, Mohd Asri (2017) Fatigue Damage Simulation Of Automobile Steering Knuckle Subjected To Variable Amplitude Loading. International Journal Of Techology And Engineering Studies, 3 (6). pp. 245-252. ISSN 2415-0924

Zakaria, Kamarul Ariffin and Ad Suhadak, Fadrah Hanim and Ali, Mohd Basri and Abdullah, S. and Ghazali, Mariyam Jameelah (2017) Influence Of Mechanical Properties On Load Sequence Effect And Fatigue Life Of Aluminium Alloy. Journal of Mechanical Engineering and Sciences (JMES), 11 (1). pp. 2467-2477. ISSN 2289-4659

Zainuddin, Hidayat and Ali, Mohd Basri and Muhammad Said, Nurlaela and Zakaria, Kamarul Ariffin (2016) Correlation Between Vertical Wheel Impact Energy With Lateral Wheel Impact Energy : A Finite Element Analysis Approach. International Journal of Automotive and Mechanical Engineering , 13 (3). pp. 3574-3583. ISSN 2229-8649

Zakaria, Kamarul Ariffin and Jimit, Roy Hanson and Ramli , S.N.R. and Abdul Aziz, Azizuddin and Bapokutty, Omar and Ali, Mohd Basri (2016) Study on fatigue life and fracture behaviour of fibreglass reinforced composites. Journal of Mechanical Engineering and Sciences (JMES), 10 (3). pp. 2300-2310. ISSN 2289-4659

Muhammad Said, Nurlaela and Ali, Mohd Basri and Zakaria, Kamarul Ariffin and Mohd Daud, Mohd Ahadlin (2016) Comparison Of Impact Duration Between Experiment And Theory From Charpy Impact Test. MATEC Web Of Conferences, 78 (-). pp. 1-8. ISSN 2261-236X

Zakaria, Kamarul Ariffin and Abdullah, Shahrum and Ghazali, Mariyam Jameelah and Ali, Mohd Basri (2016) Influence Of Elevated Temperature On The Fatigue Fracture Surface Hardness Of AA6061. Journal of Engineering and Applied Sciences, 11 (10). pp. 2130-2135. ISSN 1816-949X

Ali, Mohd Basri and Abdullah, Shahrum and Nuawi, Mohd Zaki and M. Nopiah, Z. (2014) Evaluating Instrumented Charpy Impact Strain Signals Using Curve Fitting Equations. Journal Central South University, 21 (2). pp. 600-609. ISSN 2227-5223

Ali, Mohd Basri and Abdullah, Shahrum (2014) Mathematical correlation for the strain signal energy characteristics obtained from instrumented charpy impact test. Pensee Journal, 76 (5). pp. 369-377. ISSN 0031-4773

Ali, Mohd Basri and Abdullah, Shahrum (2014) Evaluating instrumented Charpy impact strain signals using curve fitting equations. Journal Central South University, 21 (DOI: 10.1007/s11771-014-1979-3). pp. 600-6009. ISSN 2227-5223

Ali, Mohd Basri and Abdullah, Shahrum and Nuawi, Zaki and Ariffin, Ahmad Kamal (2013) Correlation of absorbed impact with calculated strain energy using an instrumented Charpy impact test. Indian Journal of Engineering & Materials Sciences, 20. pp. 504-514. ISSN 0975-1017

Ali, Mohd Basri (2012) Investigation of Energy Absorbed from an Instrumented Charpy Impact on Automotive Specimens. Applied Mechanics and Materials. ISSN 1660-9336

Ali, Mohd Basri (2011) Experimental Analysis of an Instrumented Charpy Impact Using Statistical Study Based Data Analysis. International Journal of Mechanical and Materials Engineering , 6 (2). pp. 260-268. ISSN 1823-0334

Ali, Mohd Basri (2011) Analysis of an Instrumented Charpy Impact Using Power Spectrum Density. Key Engineering Materials. pp. 130-135. ISSN 1013-9826

Ali, Mohd Basri (2011) Evaluating Charpy Impact Signals with Different Frequencies Using Power Spectrum Densities. Advanced Materials Research. ISSN 10226680

Ali, Mohd Basri (2011) Experimental Analysis of an Instrumented Charpy Impact Using Signal Processing Approach. Advanced Materials Research, 197-19. pp. 1621-1625. ISSN 1662-8985

Ali, Mohd Basri (2011) Test Simulation using Finite Element Method. Journal of Physics: IOP conference series: Material Science and Engineering (doi:10). 012-013. ISSN 1757-8981

Book Chapter

Selamat, Mohd Zulkefli and Hamdan, Hamzaitul Akmarizal and Ali, Mohd Basri and Dhar Malingam, Sivakumar (2022) Flow channel dimensional accuracy of bipolat plate fabrication through milling machining process. In: Advanced Approach for Future Technology. Penerbit UTeM Press, Durian Tunggal, Melaka, pp. 37-52. ISBN 9789672454465