Items where Division is "Faculty of Manufacturing Engineering > Department of Manufacturing Process" and Year is 2014
 | Up a level |
Article
Abu Bakar, Mohd Hadzley and Ahmad, Siti Sarah Nadia and Raja Abdullah, Raja Izamshah and Md Ali, Mohd Amran and Kasim, Mohd Shahir and Sulaiman, Mohd Amri and Mohamad Raffi, Nurul Fatin (2014) Evaluation Of The Surface Integrity When Machining LM6 Aluminum Metal Matrix Composites Using Coated And Uncoated Carbide Cutting Tools. Applied Mechanics and Materials, 465-16 (-). pp. 1049-1053. ISSN 1660-9336
Abu Bakar, Mohd Hadzley and Raja Abdullah, Raja Izamshah and Md Ali, Mohd Amran and Kasim, Mohd Shahir and Sulaiman, Mohd Amri and Ahmad, Siti Sarah Nadia and Mohamad Raffi, Nurul Fatin (2014) Surface Integrity Of LM6 Aluminum Metal Matrix Composite When Machined With High Speed Steel And Uncoated Carbide Cutting Tools. Journal of Mechanical Engineering and Sciences (JMES), 6 (-). pp. 854-862. ISSN 2289-4659
Abu Bakar, Mohd Hadzley and Raja Abdullah, Raja Izamshah and Md Ali, Mohd Amran and Yusoff, Wan Azahar and Wijeyesekera, Devapriya and Hasanah, Tuan Noor (2014) Surface Observation Of Hollow Tube Mat After Sintering And Cutting Process. International Symposium on Research in Innovation and Sustainability 2014, 26 (5). pp. 1895-1898. ISSN 1013-5316
Dimin @ Mohd Amin, Mohd Fairuz and Se, Sian Meng and Shaaban, Azizah and Hashim, Mohammad Muaz (2014) Urea impregnated biochar to minimize nutrients loss in paddy soils. International Journal of Automotive and Mechanical Engineering (IJAME), 10. pp. 2016-2024. ISSN 2229-8649
Kasim, Mohd Shahir (2014) Investigation on Wear Behavior and Chip Formation During Up-Milling and Down-Milling Operations for Inconel 718. Jurnal Teknologi (Sciences and Engineering), 66 (3). pp. 15-21. ISSN 21803722
Kasim, Mohd Shahir (2014) Modeling and Multi-response Optimization on WEDM Ti6Al4V. Applied Mechanics and Materials, 510. pp. 123-129. ISSN 1660-9336
Kasim, Mohd Shahir and Che Haron, Che Hassan and A Ghani, Jaharah and Mohamad, Effendi and Raja Abdullah, Raja Izamshah and Md Ali, Mohd Amran and Saedon, Juri (2014) Multi-Objective Optimization Using Box-Behken Of Response Surface Methodology For High-Speed Machining Of Inconel 718. Applied Mechanics and Materials, 629 (-). pp. 487-492. ISSN 1660-9336
Kasim, Mohd Shahir and Che Haron, Che Hassan and A Ghani, Jaharah and Mohamad, Effendi and Raja Abdullah, Raja Izamshah and Md Ali, Mohd Amran and Saedon, Juri (2014) Multi-Objective Optimization Using Box-Behnken Of Response Surface Methodology For High-Speed Machining Of Inconel 718. Applied Mechanics and Materials, 629. pp. 487-492. ISSN 1662-7482
Kasim, Mohd Shahir and Mohd Zahudi, Mohd Sufri and Che Haron, Che Hassan and A Ghani, Jaharah and Raja Abdullah, Raja Izamshah and Mohd Isa, Mohd Hanafiah and Saedon, Juri and Roni Sahroni, Taufik and Ito, Teruaki (2014) The Effect Of WEDM Cutting Parameter On Inconel 718 Subsurface Microhardness. Journal of Advanced Manufacturing Technology, 8 (2). pp. 51-59. ISSN 1985-3157
Kasim, Mohd Shahir and Raja Abdullah, Raja Izamshah and Md Ali, Mohd Amran and Abdul Aziz, Mohd Sanusi and Mohd Abid, Mohd Asyadi 'Azam and Che Haron, Che Hassan and A Ghani, Jaharah (2014) The Influence Of Cutting Parameter On Heat Generation In High-Speed Milling Inconel 718 Under MQL Condition. Journal of Scientific & Industrial Research (JSIR), 73 (1). pp. 62-65. ISSN 0975-1084 (Online); 0022-4456 (Print)
Kasim, Mohd Shahir and Raja Abdullah, Raja Izamshah and Minhat, Mohamad and Mohamad, Noraiham and Che Haron, Che Hassan and A Ghani, Jaharah and Saedon, Juri and Saad, Nor Hayati and Mohamed, Saiful Bahri (2014) Prediction Of Cutting Force In End Milling Of Inconel 718. Journal of Engineering and Technology (JET), 5 (2). pp. 63-70. ISSN 2180-3811
Laily, Suraya and Md Ali, Mohd Amran and Nur Izan Syahriah, Hussein and Mohd Razali, Muhamad and Manshoor, Bukhari and Mohd Amri, Lajis and Raja Izamshah , Raja Abdullah and Abu Bakar, Mohd Hadzley and Taufik , Roni Sahroni (2014) TAGUCHI METHOD PREDICTION OF EDM DIE-SINKING PARAMETERS ON SURFACE INTEGRITY FOR ALUMINIUM COMPOSITE USING COPPER ELECTRODE. Sci.Int.(Lahore), 26 (4). pp. 1455-1458. ISSN ISSN 1013-5316; CODEN: SINTE 8
Liew , Pay Jun and Yan , Jiwang and Kuriyagawa, Tsunemoto (2014) Fabrication of deep micro-holes in reaction-bonded SiC by ultrasonic cavitation assisted micro-EDM. International Journal of Machine Tools & Manufacture. pp. 13-20. ISSN 0890-6955
Md Ali, Mohd Amran and Hilmi, Hazwani and Mohd Sani, Siti Salmah and Abdullah, Zulkeflee and Mohamad, Effendi and Liew , Pay Jun (2014) Evaluation of Mechanical Performance of Homopolymer Polypropylene/Kenaf Fibre/ Binder using Full Factorial Method. Advanced Research in Materials Science, 1 (1). pp. 7-13. ISSN 2289-7992
Md Ali, Mohd Amran and Laily, Suraya and Fatin, Aisyah and Hussein, Nur Izan Syahriah and Muhamad, Mohd Razali and Manshoor, Bukhari and Mohd Amri, Lajis and RAJA ABDULLAH, RAJA IZAMSHAH and Abu Bakar, Mohd Hadzley and Taufik, Roni Sahroni (2014) The Performance of Brass Electrode on Material Removal for Aluminium Composite in EDM Die-Sinking. Applied Mechanics and Materials, 660. pp. 43-47. ISSN 1662-7482
Md Ali, Mohd Amran and Laily, Suraya and Nor, Halida Ilyani Kamarudin and Hussein, Nur Izan Syahriah and Muhamad, Mohd Razali and Manshoor, Bukhari and Lajis, Mohd Amri and Raja Izamshah , Raja Abdullah and Abu Bakar, Mohd Hadzley and Taufik, Roni Sahroni (2014) The Effect of EDM Die-Sinking Parameters on Material Characteristic for Aluminium Composite Using Tungsten Copper Electrode. Applied Mechanics and Materials, 465-466. pp. 1214-1218. ISSN 1662-7482
Md Ali, Mohd Amran and Salmah, Siti and Abdul Aziz, Mohd Sanusi and Mohd Yuhazri, Yaakob and Noraiham, Mohamad and Mohd Abid, Mohd Asyadi Azam and Zulkeflee, Abdullah and mohamad , effendi (2014) Surface Roughness Optimization in Drilling Process Using Response Surface Method (RSM). Jurnal Teknologi (Sciences and Engineering), 66 (3). pp. 29-35. ISSN 21803722
Md Ali, Mohd Amran and Suraya, Laily and Assyura, Nor and Hussein, Nur Izan Syahriah and Muhamad, Mohd Razali and Manshoor, Bukhari and Lajis, Mohd Amri (2014) The Effect of EDM Die-Sinking Parameters on Non-Conductive Materials. Advanced Materials Research, 903. pp. 56-60. ISSN 1662-8985
Md Ali, Mohd Amran and Laily, Suraya and Kamarudin, NOR Halida Ilyani and Hussein, Nur Izan Syahriah and Mohd Razali, Muhamad and Bukhari, Mashoor and Lajis, Mohd Amri and RAJA ABDULLAH, RAJA IZAMSHAH and Abu Bakar, Mohd Hadzley and Taufik, Roni Sahroni (2014) The Effect of EDM Die-sinking Parameters on Material Characteristic for Aluminium Composite Using Tungsten Copper Electrode. Applied Mechanics and Materials. pp. 1214-1218. ISSN 1662-7482
Md Ali, Mohd Amran and Laily, Suraya and Nor Assyura, Nor and Hussein, Nur Izan Syahriah and Muhamad, Mohd Razali and Manshoor, Mohd Bukhari and Lajis, Mohd Amri (2014) The Effect of EDM Die-sinking Parameters on Non-conductive Materials. Applied Mechanics and Materials. pp. 56-60. ISSN 1662-7482
Md Ali, Mohd Amran and Mohd Sani, Siti Salmah and Mohd, Zaki and RAJA ABDULLAH, RAJA IZAMSHAH and Abu Bakar, Mohd Hadzley and Subramonian, Sivarao and Kasim, Mohd Shahir and Sulaiman, Mohd Amri (2014) The effect of pressure on warpage of dumbbell plastic part in injection moulding machine. Applied Mechanics and Materials, 529. pp. 61-66. ISSN 1662-7482.
Md Ali, Mohd Amran and Salmah, Siti and Zaki, Mohd and RAJA ABDULLAH, RAJA IZAMSHAH and Abu Bakar, Mohd Hadzley and Subramonian, Sivarao and Kasim, Mohd Shahir and Sulaiman, Mohd Amri (2014) The Effect of Pressure on Warpage of Dumbbell Plastic Part in Injection Moulding Machine. Advanced Materials Research, 903. pp. 61-66. ISSN 1662-8985
Md Ali, Mohd Amran and Salmah, Siti and Zolkarnain, Marjom and Umar , Al-amani and RAJA ABDULLAH, RAJA IZAMSHAH and Abu Bakar, Mohd Hadzley and Zulkeflee, Abdullah and Abdul Aziz, Mohd Sanusi (2014) WARPAGE ANALYSIS VERIFICATION BETWEEN SIMULATION AND EXPERIMENTAL OF DUMBBELL PLASTIC PART IN THE INJECTION MOULDING PROCESS. Sci.Int.(Lahore), 26 (4). pp. 1575-1579. ISSN ISSN 1013-5316
Minhat, Mohamad (2014) An Open STEP-NC Controller Via LabVIEW platform. Periodical of Applied Mechanics and Materials Vol 660 in 2014, 660 (873). pp. 1-5. ISSN 10.4028/www.scientific.net/AMM.660.873
Minhat, Mohamad and Sulaiman, Mohd Amri and Kasim, Mohd Shahir (2014) RETROFITTING A CONVENTIONAL LATHE TO A DIGITAL INTELLIGENCE SYSTEM. Journal of advanced Manufacturing Technology (AMT). pp. 1-8. ISSN Nil (Submitted)
Mohamad, Effendi and Ito, Teruaki and Yuniawan, Dani and Ibrahim, Mohamad Amran and Saptari, Adi and Kasim, Mohd Shahir and Raja Abdullah, Raja Izamshah and Shibghatullah, Abdul Samad and Md Ali, Mohd Amran (2014) A Proposal Of Muda Indicator Agent To Estimate Lean Manufacturing Verification. Journal of Advanced Manufacturing Technology (JAMT) , 8 (2). pp. 71-82. ISSN 1985-3157
Mohamed, Saiful Bahri and Abbas, Adnan Jameel and Minhat, Mohamad (2014) A Review on Intelligence STEP-NC Data Model and Function Blocks CNC Machining Protocol. Advanced Materials Research. pp. 779-845. ISSN 10.4028/www.scientific.net/AMR.845.779
Mohd, Hadzley and Nurul, Fatin and Raja, Izamshah and Hussein, Nur Izan Syahriah and Siti, Sarah and Subramonian, Sivarao (2014) Surface Integrity of a High Speed Milling FC300 Gray Cast Iron. Applied Mechanics and Materials. pp. 642-646. ISSN 1660-9336
Raja Abdullah, Raja Izamshah and Hassan, Zulhairy and Kasim, Mohd Shahir and Abu Bakar, Mohd Hadzley and Md Ali, Mohd Amran and Sulaiman, Mohd Amri and Subramonian, Sivarao (2014) Cutter Path Strategies For Shoulder Milling Of Thin Deflecting Walls. Advanced Materials Research, 903 (-). pp. 175-180. ISSN 1662-8985
Raja Abdullah, Raja Izamshah and J.P.T. , Mo and S., Ding and A Rahman, Muhamad Arfauz and Mohd Abid, Mohd Asyadi Azam and Kasim, Mohd Shahir (2014) Effect Of Parameter Condition On Surface Roughness For Machining AISI D2 Hardened Tool Steel. Journal of Advanced Manufacturing Technology (JAMT) , 8 (1). pp. 47-56. ISSN 1985-3157
Raja Abdullah, Raja Izamshah and Mohd Nawawi, Nurul Husna and Abu Bakar, Mohd Hadzley and Md Ali, Mohd Amran and Kasim, Mohd Shahir and Sulaiman, Mohd Amri (2014) Effects Of Cutter Geometrical Features On Machining Polyetheretherketones (PEEK) Engineering Plastic. Journal of Mechanical Engineering and Sciences (JMES), 6 (-). pp. 863-872. ISSN 2289-4659
Salleh, Mohd Shukor and Omar, Mohd Zaidi and Syarif, Junaidi and Alhawari, Khalid Salim and Mohammed, Mohammed Naser (2014) The effects of Cu content on microstructure and mechanical properties of thixoformed A319 aluminium alloys. Applied Mechanics and Materials, 548-549. pp. 237-241. ISSN 1660-9336
Salleh, Mohd Shukor and Omar, Mohd Zaidi and Syarif, Junaidi and Alhawari, Khalid Salim and Mohammed, Mohamad Naser (2014) Microstructure and mechanical properties of thixoformed A319 aluminium alloy. Materials and Design, 64. pp. 142-152. ISSN 0261-3069
Salleh, Mohd Shukor and Omar, Mohd Zaidi and Syarif, Junaidi and Mohammed, Mohammed Naser (2014) Thermodynamic modelling of Al-Si-Cu alloys for semisolid processing. Sains Malaysiana, 43. pp. 791-798. ISSN 0126-6039
Salleh, Mohd Shukor and Omar, Mohd Zaidi and Syarif, Junaidi and Mohammed, Mohammed Naser and Alhawari, Khalid Salim (2014) Microstructure evolution and mechanical properties of rheocast A319 aluminum alloy using cooling slope. Applied Mechanics and Materials, 663. pp. 261-265. ISSN 1660-9336
Salleh, Mohd Shukor and Omar, Mohd Zaidi and Syarif, Junaidi (2014) The effects of mg addition on the microstructure and mechanical properties of Thixoformed Al-5%Si-Cu alloys. Journal of Alloys and Compounds. pp. 121-130. ISSN 0925-8388
Se, Sian Meng and Shaaban, Azizah and Dimin @ Mohd Amin, Mohd Fairuz and Mohamad Juoi, Jariah and Mohd Husin, Mohd Haizal and Mitan, Nona Merry Merpati (2014) Influence of heating temperature and holding time on biochars derived from rubber wood sawdust via slow pyrolysis. Journal of Analytical and Applied Pyrolysis, 107. 31- 39. ISSN 0165-2370
Subramonian, Sivarao and Abdul Rahim, Samsudin (2014) Comparison between Taguchi Method and Response Surface Methodology (RSM) in modelling CO2 laser machining. Jordan Journal of Mechanical and Industrial Engineering, 8 (1). pp. 35-42. ISSN 1995-6665
Subramonian, Sivarao and Mallisi, R and Teng, L S (2014) Enhanced Tensile properties of Stone wool fiber-reinforced high density polyethylene (HDPE) Composites. Materials Testing, 56. pp. 150-154. ISSN ISSN 0025-5300
Subramonian, Sivarao and Omar, Rostam and Mohd Zani, Mohd Hafiz and Shaaban, Azizah and Dimin @ Mohd Amin, Mohd Fairuz and Said, Md Radzai and Hassan, Luqman Hakim (2014) Top spray fluidized bed granulated paddy urea fertilizer. Applied Mechanics and Materials, 606. pp. 137-140. ISSN 1660-9336
Sulaiman, Mohd Amri and Kasim, Mohd Shahir (2014) Effect of high-speed parameters on uncoated carbide tool in finish turning Titanium Ti-6Al-4V ELI. Sains Malaysiana, 43. pp. 111-116. ISSN 0126-6039
Conference or Workshop Item
Kasim, Mohd Shahir and Sulaiman, Mohd Amri and Mohamad, Effendi and Abu Bakar, Mohd Hadzley and Minhat, Mohamad (2014) Analysis of Tool Performance during Ball-end Milling of Aluminium Alloy 6061-T6. In: iDECON 2014 – International Conference on Design and Concurrent Engineering, 21 - 23 September 2014, Melaka.
Minhat, Mohamad and Abd Rahman, Md Nizam and Abbas, Adnan Jameel (2014) Cutting Parameters Optimization of Mild Steel via AIS Heuristics Algorithm. In: iDECON 2014 – International Conference on Design and Concurrent Engineering, 21 - 23 September 2014, Melaka.
Minhat, Mohamad and Abd Rahman, Md Nizam and Abbas, Adnan Jameel (2014) Prediction of Optimum Cutting Conditions in Dry Turning Operations of S45C Mild Steel using AIS and PSO Intelligent Algorithm. In: international symposium on Research in Innovation and Sustainability 2014 (ISoRIS2014), 15-16 October 2014, Malacca.
Minhat, Mohamad and Kasim, Mohd Shahir (2014) MACHINING PARAMETERS OPTIMIZATION FOR TRIMMING OPERATION IN A MILLING MACHINE USING TWO LEVEL FACTORIAL DESIGN. In: 5th International Conference on Mechanical, Industrial and Manufacturing Technologies MIMT2014, 10-11 March 2014, Penang Malaysia. (Submitted)
Minhat, Mohamad and Kasim, Mohd Shahir and Sulaiman, Mohd Amri (2014) RETROFITTING A CONVENTIONAL LATHE TO A DIGITAL INTELLIGENCE SYSTEM. In: International Conference on Artificial Intelligence and Computer Science (AICS 2014), 15 - 16 September 2014, Bandung, Indonesia.
Book
Abdul Syukor, Mohamad Jaya and Abd. Samad, Hasan Basari and Sazalinsyah, Razali and Muhd Razali, Muhamad and Md. Nizam, Ab. Rahman (2014) Modeling of TiN coating thickness using ANFIS. Trans Tech Publications, Switzerland.
Patent
Mohd Asyadi ‘Azam Mohd Abid (2014) Graphene electrode super capacitor and method to manufacture thereof. PI 2014703512.
Raja Izamshah Raja Abdullah (2014) A plastic wall tile and method of manufacturing thereof. PI 2014703490.