Items where Subject is "R Medicine > R Medicine (General)"
Up a level |
- Library of Congress Subject Areas (37)
- R Medicine (37)
- R Medicine (General) (37)
- R Medicine (37)
-
-, MUSTAFA ALMAHDI ALGAET and MUHAMAD NOH, ZUL AZRI and Shibghatullah, Abdul Samad and -, ALI AHMAD MILAD and -, AOUACHE MUSTAPHA (2014) Telemedicine and its application in telemedicine management. Outskirts Press, Inc..
A
Abd Latif, M.J. and Ismail, N.R.A. and Ramlan, R. and Mahmud, J. and Abdul Kadir, M.R. (2013) Sensitivity Study of Surface Curvature in Characterisation Of Cartilage Mechanical Properties. Applied Mechanics and Materials, 393. pp. 941-946. ISSN 1660-9336
Abd Latif, M.J. and Jin, Z. and Wilcox, R.K. (2012) Biomechanical characterisation of ovine spinal facet joint cartilage. Journal of Biomechanics, 45. pp. 1346-1352. ISSN 0021-9290
Abd Rahim, Toibah and Misran, Fatimah and Shaaban, Azizah and Mustafa, Zaleha (2019) Effect Of pH Condition During Hydrothermal Synthesis On The Properties Of Hydroxyapatite From Eggshell Waste. Journal Of Mechanical Engineering And Sciences (JMES), 13 (2). pp. 4958-4969. ISSN 2289-4659
Abd Rahim, Toibah and Misran, F. and Mustafa, Zaleha and Shaaban, Azizah and Shamsuri, Siti Rahmah (2018) Calcium Phosphate From Waste Animal Bones:Phase Identification Analysis. Journal Of Advanced Manufacturing Technology, 12. pp. 97-109. ISSN EISSN: 2289-8107
Abdul Latiff, Roziah (2016) Establishing System Quality In Accredited Biomedical Calibration Laboratory. Masters thesis, Universiti Teknikal Malaysia Melaka.
Abdullah, Norida and Shonubi, Olurotimi Adebayo and Vazeer Alam, Azra Tasneem (2017) Stressors Contributing To Depression Among First Year Medical Student. Journal Of Human Capital Development (JHCD), 10 (2). pp. 15-25. ISSN 1985-7012
Abdullah, Norida and Hussin, Hanipah and Khoo, Nee Kah (2018) Occupational Safety And Health (OSH) Towards Environment Mainstream Tool Practices (EMT) At Malaysia Small And Medium Manufacturing Sector. The Turkish Online Journal Of Design, Art And Communication, 1. pp. 3101-3113. ISSN 2146-5193
Ahmad Sharawardi, Nur Shidah (2020) FCM-RBFN Integration Technique For Improving Isotonic Muscular Endurance Load Prediction. Masters thesis, Universiti Teknikal Malaysia Melaka.
Ahmed, Yasir Hamad (2021) Cloud - based electronic human resource management mitigation model for healthcare organizations in Iraq. Doctoral thesis, Universiti Teknikal Malaysia Melaka.
Al Azzam, Malik Bader Hasan (2017) Factors influencing medical professional adoption of electronic health record in Jordan Hospital. Doctoral thesis, Universiti Teknikal Malaysia Melaka.
Ali, Saif Mohammed (2019) Critical Factors In Electronic Health Readiness Assessment Framework For Iraq Health Services. Doctoral thesis, Universiti Teknikal Malaysia Melaka.
Apendai, Luqman and Adnan, Ammar and Radin Umar, Radin Zaid and Samuel, Siby and Hamid, Malek (2017) Computer Mouse Usage Among Computer Gamers And Its Association With Trigger Finger And Carpal Tunnel Syndrome. Human Factors And Ergonomics Journal, 2 (2). pp. 45-47. ISSN 2590-3750
H
Hambaran, Omar Mukhtar (2016) Hybrid Software Architecture For Doctor-Patient Consultation. Masters thesis, Universiti Teknikal Malaysia Melaka.
Hameed, Mustafa Emad (2022) Development of a cryptography model based on improved filtering, compression and encryption techniques for ECG signal processing. Doctoral thesis, Universiti Teknikal Malaysia Melaka.
I
Ibrahim, Aznor Juyantie (2010) Patient monitoring through short message service (SMS). Masters thesis, Universiti Teknikal Malaysia Melaka.
Ibramsa, Rizwana Seeni (2022) Correlation of biomechanical properties and greyscale image of articular cartilage using low-field Magnetic Resonance Imaging. Masters thesis, Universiti Teknikal Malaysia Melaka.
Ishak, Norfatiha (2019) The Preparation And Characterization Of Polyhydroxybutyrate-Co-Valerate Tricalcium Phosphate Scaffolds For Bone Tissue Engineering. Masters thesis, Universiti Teknikal Malaysia Melaka.
J
Jaber, Mustafa Musa (2016) Investigating the key factors effecting the use of telemedicine in Iraqi Hospitals. Doctoral thesis, Universiti Teknikal Malaysia Melaka.
Jali, Mohd Hafiz and Ahmad Izzuddin, Tarmizi and Ghazali, Rozaimi and Mustafa, Na Eisyah Sarah and Jaafar, Hazriq Izzuan and Sarkawi, Hafez (2015) System Identification Modeling Of Arm Rehabilitation Devices. Journal of Theoretical and Applied Information Technology, 81 (3). pp. 547-551. ISSN 1992-8645
Jali, Mohd Hafiz and Mustafa, Na Eisyah Sarah and Ahmad Izzuddin, Tarmizi and Ghazali, Rozaimi and Jaafar, Hazriq Izzuan (2015) ANFIS-PID Controller For Arm Rehabilitation Device. International Journal of Engineering and Technology (IJET), 7 (5). pp. 1589-1597. ISSN 0975-4024
K
Kamat, Seri Rahayu and Nordin, Eezsafauzia Azalin and Husain, Kalthom and Syed Ali, Sharifah Aznee (2017) Investigation Of Musculoskeletal Disorders Among Workers In Food Services (Cafeteria). Human Factors and Ergonomics Journal, 2 (3). pp. 27-33. ISSN 2590-3705
Kamat, Seri Rahayu and Ani, Mohammad Firdaus and M, Mohamad and Hambali, Ruzy Haryati and Husain, Kalthom (2018) A Study Of Psychophysical Factor (Heart Rate) For Driver Fatigue Using Regression Model. Malaysian Journal Of Public Health Medicine (MJPHM), 2. pp. 1-9. ISSN 1675-0306
L
Liew, Siaw Hong (2016) EEG-Based Person Authentication Modelling Using Incremental Fuzzy-Rough Nearest Neighbour Technique. Masters thesis, Universiti Teknikal Malaysia Melaka.
M
Mazlan, A. M. and M. R., Sapiee and Yahaya, M. S. (2014) The Concept of Single Use Piston Break Safety Syringe. In: International Conference on Design and Concurrent Engineering (iDECON2014), 22 - 23 September 2014, Melaka, Malaysia.
Mohammed, Mazin Abed and Abd. Ghani, Mohd Khanapi and Hamed, Raed Ibraheem and Ibrahim, Dheyaa Ahmed (2017) Review On Nasopharyngeal Carcinoma: Concepts, Methods Of Analysis, Segmentation, Classification, Prediction And Impact: A Review Of The Research Literature. Journal Of Computational Science, 21. pp. 283-298. ISSN 1877-7503
Mohd Yaacob, Noorayisahbe (2020) Acceptance Model For Electronic Personalized Health Records In Peninsular Malaysia Based On Users Perspective. Doctoral thesis, Universiti Teknikal Malaysia Melaka.
Mustaffa, M. T. and Hashim, Nik Mohd Zarifie and Mohd Saad, Norhashimah and Ab Hadi, Nik Azran and Salleh, Azahari and Ja'afar, Abd Shukur (2015) Biomedical Signal And Image Processing In Matlab. International Journal for Advance Research in Engineering and Technology, 3 (IX). pp. 29-32. ISSN 2320-6802
N
Neamah, Ali Fahem (2019) An Electronic Health Record Management Model For Healthcare Organizations In Iraq. Doctoral thesis, Universiti Teknikal Malaysia Melaka.
Ng, Poh Kiat and Jee, Kian Siong and Saptari, Adi and Ng, Chiew Yean (2015) Influences Of Tactile Sensation On Pinch Force Under Loaded And Unloaded Conditions. American Journal Of Applied Sciences, 12 (8). pp. 588-592. ISSN 1546-9239
Novi, Azman (2022) An integrated telemonitoring framework for insomnia disorder using internet of healthcare things. Doctoral thesis, Universiti Teknikal Malaysia Melaka.
O
Omar, Noor Rawaida (2017) Regression models of muscle activity, psychophysical experience and heart rate in manual lifting task. Masters thesis, Universiti Teknikal Malaysia Melaka.
R
Rahim, Sarni Suhaila (2016) Automatic Screening And Classification Of Diabetic Retinopathy Eye Fundus Images. PhD thesis, Universiti Teknikal Malaysia Melaka.
T
Tengku Zawawi , Tengku Nor Shuhada and Abdullah, Abdul Rahim and Halim, Isa and Shair, Ezreen Farina and Mohamad Saleh, Saleha (2016) Application Of Spectrogram In Analysing Electromyography (EMG) Signals Of Manual Lifting. ARPN Journal Of Engineering And Applied Sciences, 11. pp. 3603-3609. ISSN 1819-6608
Y
Yusof, R. (2012) Faedah Pengambilan Air Kosong. Buletin FTMK. pp. 32-33. ISSN 2229-9351
Z
Zainal Abdin, Mohamad Faisal (2019) Design Of Mechanical Device For Stroke Syndrome After Rehabilitation. Masters thesis, Universiti Teknikal Malaysia Melaka.
Zainudin, Muhammad Noorazlan Shah and Mohd Said, Muzalifah and Ismail, Mohd Muzafar (2011) Feature Extraction on Medical Image using 2D Gabor Filter. Applied Mechanics and Materials, 52-54 . pp. 2128-2132. ISSN 1660-9336 (in acceptance letter and journal proceeding)