Items where Author is "Salleh, Mohd Shukor "

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Item Type | No Grouping
Number of items: 60.

Article

Raja Abdullah, Raja Izamshah and Kasim, Mohd Shahir and Rosman, Muhammad Rafiq and Lamat, Arshad and Salleh, Mohd Shukor and Liew, Pay Jun and Abdul Aziz, Mohd Sanusi and Abdullah, R.S.A. (2021) Effects of cutter geometry and cutting parameters on machining Al/SiC Metal Matrix Composites (MMC). International Journal of Nanoelectronics and Materials, 14 (SI). pp. 343-352. ISSN 1985-5761

Yahaya, Saifudin Hafiz and Subramonian, Sivarao and Salleh, Mohd Shukor and Satish, Pujari and Kadirgama, Kumaran (2021) Importance Of Knowledge-Attitude-Practice To Enhance University Technology Transfer. Journal of Advanced Manufacturing Technology, 15 (2). pp. 71-82. ISSN 1985-3157

Md Ali, Afifah and Omar, Mohd Zaidi and Hashim, Hanizam and Salleh, Mohd Shukor and Mohamed, Intan Fadhlina (2021) Recent development in graphene-reinforced aluminium matrix composite: a review. Reviews on Advanced Materials Science, 60. pp. 801-817. ISSN 1606-5131

Yahaya, Saifudin Hafiz and Yaakub, Siti Farizah and Salleh, Mohd Shukor and Ahmad, Fauzi and Yaakob, Mohd Yuhazri and Akmal, Suriati (2021) Comparison study for double passive car suspension system through mathematical modelling and experimental work. International Journal of Advanced Technology and Engineering Exploration, 8 (82). pp. 1183-1192. ISSN 2394-7454

Salleh, Mohd Shukor and Mohammad Ali, Nur Fatihatur Rawdhah and Yahaya, Saifudin Hafiz and Al-Zubaidi, S.S. (2021) Effects Of Induction Heating On Thixoformed MWCNT-Al Alloy Composite. Journal of Advanced Manufacturing Technology, 15 (1). pp. 27-37. ISSN 1985-3157

Salleh, Mohd Shukor and Hashim, Hanizam and Abd Rahman, Ammar and Sulong, Abu Bakar and Abd Rahman, Ammar (2021) Influence Of Short Heat Treatment On The Microstructures And Mechanical Properties Of Thixoformed Aluminum Alloy Composite. Jurnal Tribologi, 28. pp. 96-104. ISSN 2289-7232

Hashim, Hanizam and Salleh, Mohd Shukor and Abd Rahman, Mohd Soufhwee and Yahaya, Saifudin Hafiz and Abd Rashid, Mohd Warikh and Omar, Mohd Zaidi and Al-Zubaidi, Salah and Sulong, Abu Bakar (2020) T6 Heat Treatment Optimization Of Thixoformed LM4 Aluminium Alloy Using Response Surface Methodology. Malaysian Journal on Composites Science and Manufacturing, 3 (1). pp. 1-13. ISSN 2716-6945

Salleh, Mohd Shukor and Jaafar, Mohd Fairuz and Raja Abdullah, Raja Izamshah and Yahaya, Saifudin Hafiz and Hassan, M.H. and Al-Zubaidi, S.S. (2020) Influence Of Point And Helix Angle On Thrust Force And Delamination For One-Shot Drilling Of Carbon Fiber Reinforced Plastic (CFRP). Journal of Advanced Manufacturing Technology (JAMT), 14 (2). pp. 15-28. ISSN 1985-3157

Salleh, Mohd Shukor and Jaafar, Mohd Fairuz (2020) Trust Force And Hole Quality Observation In Various Major Penetration Angle Drilling Of Carbon Fibre Reinforced Plastic (CFRP). International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), 10 (3). pp. 3849-3860. ISSN 2249-8001

Salleh, Mohd Shukor and Yahaya, Saifudin Hafiz and Mohamad, Noraiham and Hashim, Hanizam and Omar, Mohd Zaidi (2020) Mechanical Properties Of Thixoformed Al-5Si Alloy Composite Reinforced By Multiwalled Carbon Nanotubes And Alumina Powder. Malaysian Journal on Composite Science and Manufacturing, 1 (1). pp. 38-44. ISSN 2716-6945

Salleh, Mohd Shukor and Ab Rahman, Azhan and Yahaya, Saifudin Hafiz and Yaakob, Mohd Yuhazri and Akmal, Suriati (2020) A Comprehensive Review On The Influence Of Equal Channel Angular Pressing Parameters On Magnesium Alloys. International Journal of Engineering Research and Technology, 13 (11). pp. 3855-3871. ISSN 0974-3154

Salleh, Mohd Shukor and Yahaya, Saifudin Hafiz and Abdul Rahman, Azrul Azwan and Othman, Intan Sharhida and Al Zubaidi, S.S. and Zulkifli, K. (2020) Investigation Of Mechanical & Wear Characteristics Of T6 Heat Treated Thixoformed Aluminium Alloy Composite. Journal of Advanced Manufacturing Technology (JAMT), 14 (3). pp. 1-14. ISSN 1985-3157

Hashim, Hanizam and Salleh, Mohd Shukor and Omar, Mohd Zaidi (2019) Homogenous Dispersion And Interfacial Bonding Of Carbon Nanotube Reinforced With Aluminum Matrix Composite: A Review. Reviews On Advanced Materials Science, 58 (1). pp. 295-303. ISSN 1605-8127

Salleh, Mohd Shukor and Abd Rahman, Ammar and Othman, Intan Sharhida and Subramonian, Sivarao and Yahaya, Saifudin Hafiz and Siswanto, Nurhadi (2019) Investigation Of Wear And Corrosion Characteristics Of Short Heat Treated Thixoformed Aluminium Alloy. Journal of Advanced Manufacturing Technology, 13 (3). pp. 101-113. ISSN 1985-3157

Salleh, Mohd Shukor and Hashim, Hanizam and Yahaya, Saifudin Hafiz and Nurhadi, Siswanto (2019) Effect Of Magnesium Surfactant On Wettability Of Carbon Nanotube In A356 Alloy Composite. Journal of Advanced Manufacturing Technology (JAMT), 13 (2). pp. 33-44. ISSN 1985-3157

Yahaya, Saifudin Hafiz and Yaakub, Siti Farizah and Salleh, Mohd Shukor and Abd Rashid, Mohd Warikh and Abdullah, Abu and Purnomo, Muhammad Ridwan Andi (2019) Mathematical Modelling Of The Passive And Semi-Active Automobile Suspension Systems In Ford Scorpio Car Model. Journal of Advanced Manufacturing Technology (JAMT), 13 (2). pp. 83-96. ISSN 1985-3157

Hashim, Hanizam and Salleh, Mohd Shukor and Omar, M.Z. and Sulong, A.B. (2019) Effects Of Mechanical Stirring And Short Heat Treatment On Thixoformed Of Carbon Nanotube Aluminium Alloy Composite. Journal Of Alloys And Compounds, 788. pp. 83-90. ISSN 0925-8388

Laily, Suraya and Hussein, Nur Izan Syahriah and Salleh, Mohd Shukor and Mohamad Nizam, Ayof (2019) Statistical analysis of second repair welding on dissimilar material using Taguchi method. Journal of Mechanical Engineering and Sciences, 13 (2). pp. 5021-5030. ISSN 2289-4659

Salleh, Mohd Shukor and Jaafar, Mohd Fairuz and Raja Abdullah, Raja Izamshah and Hassan, Muhammad Hafiz and Sundi, Syahrul Azwan and Mohd Shahrim, Mohammad Shah All Hafiz and Kasim, Mohd Shahir (2019) Influence On Thrust Force And Delamination For One Shot Drilling Of Carbon Fibre Reinforced Plastic (CFRP). International Journal Of Mechanical And Mechatronics Engineering, 19 (1). pp. 43-56. ISSN 2227-2771

Subramonian, Sivarao and Jayahkundy, Raguvaran and Ali, Aidy and M. F. Abdullah, M. F. Abdullah and Dhar Malingam, Sivakumar and Md Ali, Mohd Amran and Arep@Ariff, Hambali and Salleh, Mohd Shukor and K. Umesh, K. Umesh (2019) Investigation Of Tyre Pressure Drop Phenomenon Using Specially Designed Real-Time Data Mining And Storage System. International Journal of Recent Technology and Engineering, 7 (5S4). pp. 533-537. ISSN 2277-3878

Salleh, Mohd Shukor and Mohamad Ishak, Nurul Naili and Yahaya, Saifudin Hafiz and Subramonian, Sivarao and Abdullah, A. (2018) Effect Of Equal Channel Angular Pressing On The Microstructure And Mechanical Properties Of A356 Alloy. Journal Of Advanced Manufacturing Technology, 12. pp. 23-39. ISSN 1985-3157

Salleh, Mohd Shukor and Abdul Rahman, Mohd Hafizi and Ab. Razak, Mohd Suffian and Mohamad Kamal, Mohamad Ridzuan and Marjom, Zolkarnain and Anuar, Liza and Mohamad Saad, Nur Adzly (2018) Design And Optimization Of Front Lower Control Arm (FLCA) For C-Segment Passenger Car. International Journal Of Engineering & Technology, 7. pp. 71-75. ISSN 09754024, 23198613

Salleh, Mohd Shukor and Minhat, Mohamad and Hussein, Nur Izan Syahriah and Abdul Rahim, Mohd Aidil Shah (2018) A Comprehensive Review On Cold Work Of AISI D2 Tool Steel. Metallurgical Research & Technology, 115 (1). pp. 1-12. ISSN 2271-3646

Kasim, Mohd Shahir and Che Haron, Che Hassan and A Ghani, Jaharah and Raja Abdullah, Raja Izamshah and Akmal, Suriati and Md Ali, Mohd Amran and Abu Bakar, Mohd Hadzley and Salleh, Mohd Shukor (2018) Investigation Of Tangential Force On Ball Nose Rake Face During High-Speed Milling Of Inconel 718. Advances In Materials And Processing Technologies, 4 (3). pp. 1-7. ISSN 2374-0698

Ishak, Anuar and Mohamad, Effendi and Sukarma, Lukman and Salleh, Mohd Shukor and Salleh, Mohd Rizal and Mohamad, Noraiham and Raja Abdullah, Raja Izamshah and Md Ali, Mohd Amran (2018) Cleaner Production Implementation In An E-Waste Recovery Plant By Using The Value Stream Mapping. Journal Of Advanced Manufacturing Technology (JAMT) , 12 (1 (2)). pp. 55-67. ISSN 1985-3157 (Unpublished)

Yahaya, Saifudin Hafiz and W. N., Hidayah and Salleh, Mohd Shukor and Abdullah, Abu and H., Sihombing (2018) Customer Preferences In Car Design Using Kansei Engineering And Cubic Bezier Curve. International Journal Of Engineering & Technology, 7 (4). pp. 4170-4173. ISSN 2227-524X

Md Ali, Mohd Amran and Abdullah, Abu and Mohamad, Effendi and Salleh, Mohd Shukor and Hussein, Nur Izan Syahriah and Muhammad, Z. and Dahaman, Shamshulizam (2018) Tensile Properties Of Ternary Blends For HDPE/PP/Recycle HDPE In Blow Moulding Process. Journal Of Advanced Manufacturing Technology (JAMT) , 12 (1 (2)). pp. 31-41. ISSN 1985-3157

Mat Harttar, Maziati Akmal and Abd Rashid, Mohd Warikh and Azlan, Umar Al-Amani and Azmi, Nurul Azuwa and Salleh, Mohd Shukor and Kasim, Mohd Shahir (2017) Optimizing The Processing Conditions Of Sodium Potassium Niobate Thin Films Prepared By Sol-Gel Spin Coating Technique. Ceramics International, 44. pp. 317-325. ISSN 0272-8842

Mohamad Kamal, Mohamad Ridzuan and Abdul Rahman, Abdul Raheem and Wakhi Anuar, Nur Farah Bazilah and Salleh, Mohd Shukor (2017) Effect Of Coating Thickness On The Microstructure And Mechanical Properties Of AL-SI (LM6) Alloy Lost Wax Casting. Journal Of Mechanical Engineering, SI (3) (1). pp. 97-106. ISSN 1823- 5514

Ramli, Mohd Irman and Nuawi, Mohd. Zaki and Abdullah, Shahrum and Mohammad Rasani, Mohammad Rasidi and Salleh, Mohd Shukor and Md Basar, Mohd Farriz (2017) The Study Of EMA Effect On Modal Identification: A Review. Journal Of Mechanical Engineering Technology, 9 (1). pp. 103-121. ISSN 2180-1053

Salleh, Mohd Shukor and Ishak, Anuar and Mohamad, Effendi and Sukarma, Lukman and Mahmood, Azmi B.R. and A Rahman, Muhamad Arfauz and Yahaya, Saifudin Hafiz and Salleh, Mohd Shukor and Sulaiman, Mohd Amri (2017) Cleaner Production Implementation Using Extended Value Stream Mapping For Enhancing The Sustainability Of Lean Manufacturing. Journal of Advanced Manufacturing Technology (JAMT) , 2289-8 (1). pp. 47-60. ISSN 1985-3157

Alhawari, Khaled Salem and Omar, Mohd Zaidi and Ghazali, Mariyam Jameelah and Salleh, Mohd Shukor and Abdulrazaq, Mohammed Naser (2017) Effect Of Thixoforming On The Wear Properties Of Al-Si-Cu Aluminum Alloy. Jurnal Teknologi , 79 (5-2). pp. 83-87. ISSN 0127-9696

Mohamad Ishak, Nurul Naili and Salleh, Mohd Shukor and Yahaya, Saifudin Hafiz and Mohamad, Effendi and Sulaiman, Mohd Amri (2017) The Effect of Equal Channel Angular Pressing (ECAP) on the Microstructure and Hardness of A356 Aluminium Alloy. Journal Of Advanced Manufacturing Technology (JAMT), 11 (2). pp. 47-57. ISSN 1985-3157

Safian, Mohd Azizul Hikmi and Salleh, Mohd Shukor and Subramonian, Sivarao and Hussein, Nur Izan Syahriah and Sulaiman, Mohd Amri and Yahaya, Saifudin Hafiz (2017) Production Of LM4 Feedstock For Thixoforming By Using Cooling Slope Casting. Journal Of Advanced Manufacturing Technology (JAMT) , 11 (1). pp. 77-90. ISSN 1985-3157

Salleh, Mohd Shukor and Mohamad Ishak, Nurul Naili and Safian, Mohd Azizul Hikmi and Yahaya, Saifudin Hafiz (2016) Microstructural Analysis And Mechanical Properties Of LM6 Alloy Processed By Cooling Slope Casting. Journal of Advanced Manufacturing Technology (JAMT) , 10 (2). p. 1. ISSN 1985-3157

Subramonian, Sivarao and Ali, Aidy and Md Ali, Mohd Amran and Dhar malingam, Sivakumar and Salleh, Mohd Shukor and Raja Abdullah, Raja Izamshah (2016) Performance Evaluation Of Reworked Weld Joints. International Journal Of Engineering And Technologies, 9 (-). pp. 5-12. ISSN 2297-623X

Salleh, Mohd Shukor and Omar, Mohd Zaidi and Alhawari, Khalid Salim and Mohammed, Mohammed Naser and Md Ali, Mohd Amran and Mohamad, Effendi (2016) Microstructural evolution and mechanical properties of thixoformed A319 alloys containing variable amounts of magnesium. Transactions of Nonferrous Metals Society of China, 26. pp. 2029-2042. ISSN 1003-6326

Subramonian, Sivarao and Ali, Aidy and Amran, Mohammad and Dhar malingam, Sivakumar and Salleh, Mohd Shukor (2016) Effect Of Fiber Loading On The Mechanical Properties Of Bagasse Fiber–Reinforced Polypropylene Composites. Advances In Mechanical Engineering, 8 (8). pp. 1-5. ISSN 1687-8132

Aziz, Ahmad and Omar, Mohd Zaidi and Salleh, Mohd Shukor (2016) Microstructural Evolution Of A333 Alloy Through Semisolid Metal Process. Sains Malaysiana, 45 (6). pp. 977-987. ISSN 0126-6039

Alhawari, Khalid Salim and Omar, Mohd Zaidi and Ghazali, Mariyam Jameelah and Salleh, Mohd Shukor (2016) Dry Sliding Wear Behaviour Of Thixoformed Hypoeutectic AL–SI–CU Alloy With Different Amounts Of Magnesium. Journal Composite Interfaces, 23 (6). pp. 519-531. ISSN 0927-6440

Subramonian, Sivarao and Ali, Aidy and Amran, Mohammad and Dhar malingam, Sivakumar and Salleh, Mohd Shukor and Raja Abdullah, Raja Izamshah (2016) Effect Of Fiber Loading On The Mechanical Properties Of Bagasse Fiber–Reinforced Polypropylene Composites. Advances In Mechanical Engineering, 8 (8). pp. 1-5. ISSN 1687-8132

Salleh, Mohd Shukor and Omar, Mohd Zaidi (2015) Influence of Cu content on microstructure and mechanical properties of thixoformed Al−Si−Cu−Mg alloys. Transactions of Nonferrous Metals Society of China, 25. pp. 3523-3538. ISSN 1003-6326

Salleh, Mohd Shukor and Mohammed, M.N. and Omar, Mohd Zaidi and Sajuri, Zainuddin and Alhawari, Khaled Salem (2015) Trend And Development Of Semisolid Metal Joining Processing. Advances in Materials Science and Engineering, 2015. pp. 1-13. ISSN 1687-8434

Salleh, Mohd Shukor and Omar, Mohd Zaidi and Syarif, Junaidi and Alhawari, Khalid Salim and Mohammed, Mohamad Naser (2015) Effects of Cu on the microstructures and tensile properties of thixoformed Al-Si alloys. Solid State Phenomena. pp. 91-98. ISSN 1662-9779

Salleh, Mohd Shukor and Omar, Mohd Zaidi and Syarif, Junaidi and Mohammed, Mohammed Naser and Alhawari, Khaled Salem (2015) Effect of pouring temperature and cooling slope length on microstructure and mechanical properties of Rheocast A319 aluminium alloy. Applied Mechanics and Materials, 699. pp. 251-256. ISSN 1660-9366

Md Ali, Mohd Amran and K.M, Faizal and Salleh, Mohd Shukor and Sulaiman, Mohd Amri and Mohamad, Effendi (2015) Design Consideration For Design A Flat And Ring Plastics Part Using Solidworks Software. IOP Conference Series: Materials Science And Engineering, 100 (1). pp. 1-9. ISSN 1757-8981

Salleh, Mohd Shukor and Omar, Mohd Zaidi and Syarif, Junaidi (2014) The effects of mg addition on the microstructure and mechanical properties of Thixoformed Al-5%Si-Cu alloys. Journal of Alloys and Compounds. pp. 121-130. ISSN 0925-8388

Salleh, Mohd Shukor and Omar, Mohd Zaidi and Syarif, Junaidi and Alhawari, Khalid Salim and Mohammed, Mohammed Naser (2014) The effects of Cu content on microstructure and mechanical properties of thixoformed A319 aluminium alloys. Applied Mechanics and Materials, 548-549. pp. 237-241. ISSN 1660-9336

Salleh, Mohd Shukor and Omar, Mohd Zaidi and Syarif, Junaidi and Mohammed, Mohammed Naser and Alhawari, Khalid Salim (2014) Microstructure evolution and mechanical properties of rheocast A319 aluminum alloy using cooling slope. Applied Mechanics and Materials, 663. pp. 261-265. ISSN 1660-9336

Salleh, Mohd Shukor and Mohammed, M.N. and Omar, Mohd Zaidi and Syarif, Junaidi (2014) Morphological Evolution During Partial Re-Melting Of AISI D2 Cold-Work Tool Steel. Sains Malaysiana, 43 (8). pp. 1213-1219. ISSN 0126-6039

Salleh, Mohd Shukor and Omar, Mohd Zaidi and Syarif, Junaidi and Alhawari, Khalid Salim and Mohammed, Mohamad Naser (2014) Microstructure and mechanical properties of thixoformed A319 aluminium alloy. Materials and Design, 64. pp. 142-152. ISSN 0261-3069

Salleh, Mohd Shukor and Omar, Mohd Zaidi and Syarif, Junaidi and Mohammed, Mohammed Naser (2014) Thermodynamic modelling of Al-Si-Cu alloys for semisolid processing. Sains Malaysiana, 43. pp. 791-798. ISSN 0126-6039

Salleh, Mohd Shukor and Omar, Mohd Zaidi and Syarif, Junaidi and Mohammed, Mohamad Naser and Alhawari, Khalid Salim (2013) Thermodynamic simulation on thixoformability of aluminium alloys for semi-solid metal processing. International Journal of Mathematics and Computers in Simulation, 7 (3). pp. 286-293. ISSN 1998-0159

Salleh, Mohd Shukor and Omar, Mohd Zaidi and Syarif, Junaidi and Mohammed, Mohamad Naser (2013) An overview of semisolid processing of aluminium alloys. ISRN Materials Sciences. pp. 1-9. ISSN 2356-7872

Sivarao, Subramonian and Salleh, Mohd Shukor and T., Joseph Sahaya Anand and Abd Rahman, Ammar (2010) DOE Based Statistical Approaches in Modeling of Laser Processing – Review & Suggestion. International Journal of Engineering & Technology IJET-IJENS. pp. 1-8. ISSN 2077-1185

Sivarao, Subramonian and T., Joseph Sahaya Anand and Abd Rahman, Ammar and Salleh, Mohd Shukor (2010) RSM Based Modeling for Surface Roughness Prediction in Laser Machining. International Journal of Engineering & Technology, 10 (4). pp. 32-39. ISSN 2077-1185

Sivarao, Subramonian and Ammar, Abd Rahman and T., Joseph Sahaya Anand and Salleh, Mohd Shukor (2010) Stochastic Modeling and Optimization of Laser Machining by Response Surface Methodology. International Journal of Engineering & Technology, 10 (04). pp. 13-21. ISSN 2077-1185

Conference or Workshop Item

Salleh, Mohd Shukor and Minhat, Mohamad and Che Zainal Abidin, Nik Mohd Farid and Arep @ Ariff, Hambali (2011) System Framework Tools For Future CNC Machining. In: 2nd International Conference On Mechanical And Manufacturing Engineering (ICME 2011), 6 - 8 June 2011, PICC, Putrajaya.

Muhammad, M. and Salleh, Mohd Shukor and Zakaria, M. S. and Gannapathy, Vigneswara Rao and Mohd Nor, Husain and Mohd Ibrahim, Imran and Muhammad Syahrir, Johal and Ahmad, Mohd Riduan and Abdul Aziz, Mohamad Zoinol Abidin (2008) Physical Performance and Cross Layer Design for Wireless Mesh Networks. In: Proceedings of the 4th International Conference on Information Technology and Multimedia at UNITEN (ICIMU' 2008) , 17-19 November 2008, UNITEN.

Thesis

Salleh, Mohd Shukor (2015) Pembangunan Aloi Aluminium Untuk Pemprosesan Logam Separa Pepejal. Doctoral thesis, Universiti Teknikal Malaysia Melaka..

This list was generated on Fri Dec 2 21:43:21 2022 +08.