Items where Author is "Sivarao, Subramonian"

Article

Sivarao, Subramonian and Alif, Aziz and RAJA ABDULLAH, RAJA IZAMSHAH and Taufik, , and Hambali, A (2013) Finite Element Analysis of Super Energy Saving Locking System Towards Enhancing Door Lock Performance and Security. International Review of Mechanical Engineering, 7 (6). pp. 1147-1151. ISSN 1970-8734

T., Joseph Sahaya Anand and Sivarao, Subramonian and K., Ganesh Kumar (2013) MECHANICAL PROPERTIES OF INTERMETALLIC NICKEL ALUMINIDES (Ni3Al). Far East Journal of Electronics and Communications, 11 (1). pp. 47-56. ISSN 0973-7006

Sivarao, Subramonian and Nantha, kumar and Taufik, , and Sivakumar, Dhar Malingam and Mohd Amri , Sulaiman and Kassim, M.S (2013) Heat Exchanger Analysis to Reduce Hexane Loss in Palm Kernel Oil Extraction Plant. International Journal of Mechanical and Mechatronics Engineering, 13 (4). pp. 29-33. ISSN 2077-124X

Sivarao, Subramonian and Robert, Milkey and Samsudin, Abdul Rahim (2013) RSM Modelling and Optimization of CO2 Laser Machining of Industrial PVC Foam. International Review on Modelling and Simulations, 6 (4). pp. 1339-1343. ISSN 1974-9821

T., Joseph Sahaya Anand and Sivarao, Subramonian and K., Ganesh Kumar (2013) Mechanical and Chemical Properties of intermetallic Ni3Al for Automotive Body. Current Research in Malaysia (CREAM), 2 (2). pp. 61-72. ISSN 2231–8305

Tan, CheeFai and Tean, Z.Y. and Said, M.R. and Khalil, S.N. and Sudin, M.N. and Karjanto, Juffrizal and Yusof, N.M. and Sivarao, Subramonian (2013) Conceptual design of cantilever support for long haul bus passenger seat. Australian Journal of Basic and Applied Sciences. pp. 383-387. ISSN 1991-8178

Md Ali, Mohd Amran and M., Samsul and HUSSEIN, NUR IZAN SYAHRIAH and Mohd Rizal , Salleh and Raja Izamshah , Raja Abdullah and Mohd , Hadzley and Mohd Shahir, Kasim and Mohd Amri , Sulaiman and Sivarao, Subramonian (2013) The Effect of Edm Die-sinking Parameters on Material Removal Rate of Beryllium Copper Using Full Factorial Method. Middle-East Journal of Scientific Research. pp. 44-50. ISSN 1990-9233

Raja Abdullah, Raja Izamshah and Yuhazri, Yaakob and Mohd , Hadzley and Mohd , amran and Sivarao, Subramonian (2013) Effects of End Mill Helix Angle on Accuracy for Machining Thin-Rib Aerospace Component. Applied Mechanics and Materials, 315. pp. 773-777. ISSN 1660-9336

Sivarao, Subramonian and S.THIRU,, CHITRAMBALAM and T., Joseph Sahaya Anand and Mariana , Yusof (2013) Establishing a Hybrid Laser Lathing Technology. World Applied Sciences Journal, 21. pp. 53-59. ISSN 1818-4952

Hambali, Arif and T., Joseph Sahaya Anand and Sivarao, Subramonian (2013) Finite Element Analysis of Conceptual Lumbar Spine for Different Lifting Position. World Applied Sciences Journal, 21. pp. 68-75. ISSN 1818-4952

Sivarao, Subramonian and Qumrul, Ahsan and Mohd , amran and Joseph Sahaya Anand, T and Raja Izamshah , Raja Abdullah (2013) Friction Performance Analysis of Waste Tire Rubber Powder Reinforced Polypropylene Using Pin-On-Disk Tribometer. Procedia Engineering . pp. 743-749. ISSN 1877-7058

Abu Bakar, Mohd Hadzley and Raja Abdullah, Raja Izamshah and Md. Ali, Mohd Amran and Jusoff, Kamaruzzaman and Sivarao, Subramonian and Ariff, Hambali and Hussein, Nur Izan Syahriah and Wan Mahmood, Wan Hassrulnizzam and Abdullah, Abu and Yusoff, Marianna and Shamshiri, Meysam (2013) Machining Performance of Ti-6Al-4V Titanium Alloy Assisted by High Pressure Waterjet. World Applied Sciences Journal, 21. pp. 98-104. ISSN 1818-4952

Wan Hasrulnizzam , Wan Mahmood and Ab Rahman, Mohd Nizam and Md Deros, Baba and Jusoff, Kamaruzzaman and Adi, Saptari and Zuhriah, Ebrahim and Abu Bakar, Mohd Hadzley and Sivarao, Subramonian and Jano, Zanariah (2013) Manufacturing Performance in Green Supply Chain Management. World Applied Sciences Journal. pp. 76-84. ISSN 1818-4952

Sivarao, Subramonian and S., Thiru and Jusoff, Kamaruzzaman and Azizah, Shaaban and Mariana, Yusoff and Jano, Zanariah and Yuhazri, Yaakob and HASOLOAN , HAERY IAN PIETER and Abu Bakar, Mohd Hadzley and Raja, Izamshah and Hussein, Nur Izan Syahriah and Mohd Amran, Md Ali and Taufik, , and Wahyono Sapto, Widodo and Tan, CheeFai and Sivakumar, Dhar Malingam (2013) Modelling of CO2 Laser Materials Processing by Networked Neuro-Dimension Fuzzy Intelligent System. Australian Journal of Basic and Applied Sciences, 7 (3). pp. 35-45. ISSN 1991-8178

T., Joseph Sahaya Anand and S., Shariza and Z.M., Rosli and Azizah, Shaaban and Sivarao, Subramonian and Mohamad, Radzai Said and S., Thiru (2013) Optical and Mott-Schottky Studies of Ternary MoSSe Thin Films Synthesized by Electrochemical Route. World Applied Sciences Journal, 21. pp. 60-67. ISSN 1818-4952

Mohd Rosli, ZULKIFLI and Joseph Sahaya Anand, T and S., Shariza and Azizah, Shaaban and Sivarao, Subramonian and Radzai, Said and Kamaruzaman, Jusoff and Thiru, S (2013) Optical and Mott-Schottky Studies of Ternary MoSSe Thin Films Synthesized by Electrochemical Route. World Applied Sciences Journal. pp. 60-67. ISSN 1818-4952

Sivarao, Subramonian and Samsudin, Abdul Rahim and Tin , Shaw Ling and Anuar , Mohamed Kassim and Taufik, , and Mohd Amran, Md Ali (2013) Programable Automatic Servise Time Reminder (PAST-R) To Overcome Traditional Maintenance Approach. Australian Journal of Basic and Applied Sciences, 7 (11). pp. 206-212. ISSN 1991-8178

Sivarao, Subramonian and Sivakumar, Dhar Malingam and Taufik, - and Yuhazri, Yaakob and Tan, CheeFai and Haeryip , Sihombing (2012) An Exploratory Study - Critical Laser Processing of Composite Materials. International Journal of Engineering Research & Technology, 1 (10). pp. 1-8. ISSN 2278-0181

Sivarao, Subramonian and Nanthakumar, Rajoo and Widodo, W. Sapto and Haeryip , Sihombing (2012) Hexane Economization in Palm Kernel oil Plant: A Study After Process Design Improvement. Global Engineers & Technologists Review, 2 (12). pp. 7-14. ISSN 2231-9700

Sivarao, Subramonian and Taufik, , and Yuhazri, Yaakob and Haeryip , Sihombing (2012) Critical Review of Electro-Mechanical Door Locking System and Proposal towards Development of Innovative Super Energy Saving Door Locking System. International Journal of Engineering and Innovative Technology, 2 (5). pp. 201-207. ISSN 2277-3754

Roni Sahroni, Taufik and Ariff, Hambali and Abdullah, Tajul Arfiifn and Sivarao, Subramonian (2012) Design Optimization of Multi Vacuum Manifold for Semiconductor Industry. Malikussaleh Industrial Engineering Journal (MIEJ), 1 (1). pp. 5-10. ISSN ISSN 2302 934X

Roni Sahroni, Taufik and Sivarao, Subramonian and Ariff, Hambali and Abdullah, Tajul Ariffin (2012) Design of Jigs and Fixtures for Hydraulic Press Machine. Malikussaleh Industrial Engineering Journal. pp. 19-24. ISSN ISSN 2301 934X

Sivarao, Subramonian and Abdul , Zuhair and Raja, izam and Mohd , amran and Nur, izan and Mohd , Hadzley (2012) Taper Quality Evaluation of a Laser Lathed Steel Rod Using Modified Flatbed CO2 Laser Cutting Machine. International Journal of Current Research and Review, 4 (15). pp. 81-91. ISSN 0975-5241

Sivarao, Subramonian and Nur Izan Syahriah, Hussein and Raja Izamshah , Raja Abdullah and Mohd Amran, Md Ali and Mohd , Hadzley (2012) Transforming Linear Laser Cutting machine Into Laser Lathing – An Empirical Investigation & Evaluation of Roundness Quality. Journal of Current Engineering Research, 2 (2). pp. 98-104. ISSN 2250 - 2637

Sivarao, Subramonian and Abdul Rahim , Samsudin and Haeryip , Sihombing and Taufik, , and Yuhazri, Yaakob and Sivakumar, Dhar Malingam and Tan, CheeFai (2012) Promising Techniques of Automotive Engine Lubrication Oil Monitoring System – A Critical Review towards Enhancement. The International Journal of Engineering And Science, 1 (2). pp. 228-233. ISSN 2319 – 1813

Sivarao, Subramonian and Mohd Rizal , Salleh and Ahmad, Kamely and Tajul Ariffin, Abdullah and Taufik, - (2011) Mechanical Properties Modification of Polyethylene (PE) for CaCO3 Particulated Composites. Advanced Materials Research, 264-26. pp. 880-887. ISSN 10226680

Sivarao, Subramonian and Mohd Rizal , Salleh and Ahmad , Kamely and Tajul , Arifin and Taufik, , (2011) Characterizing Chicken Eggshell Reinforced Polypropylene (PP). Advanced Materials Research, 264-26. pp. 871-879. ISSN 1662-8985

Taufik, Roni Sahroni and Tajul Ariffin , Abdullah and Sivarao, Subramonian (2011) Design and Simulation on Cast metal Matrix Composite by Investment Casting. Advanced Materials Research, 264-26. pp. 323-328. ISSN 10226680

Taufik, Roni Sahroni and Tajul Ariffin, Abdullah and Sivarao, Subramonian (2011) Design and Simulation on Compressor Metal Matrix Composite by Investment Casting. Advanced Materials Research, 264-26. pp. 403-408. ISSN 10226680

Mohd Afzanizam, Mohd Rosli and Akop, Mohd Zaid and Mansor, Muhd Ridzuan and Sivarao, Subramonian (2011) Development of a Stand-alone Solar Powered Bus Stop. JOURNAL OF MECHANICAL ENGINEERING AND TECHNOLOGY (JMET), 3 (2). pp. 55-66. ISSN 2180-1053

T., Joseph Sahaya Anand and Sivarao, Subramonian and K. Ganesh Kumar,, gnsh_gaara@yahoo.com (2011) A Novel Intermetallic Nickel Aluminide (Ni3Al) as an Alternative Automotive Body Material. International Journal of Engineering & Technology, 11 (1). pp. 274-282. ISSN ISSN: 2077-1185 (Online) 2227-2712 (Print) Impact Factor=0.4245

Taufik, , and Kee, Kuo Zhuan and Tajul Ariffin, Abdullah and Sivarao, Subramonian (2010) Design Optimization on Rotary Draw Tube Bending Parameters using FEA. International Conference on Design and Concurrent Engineering 2010 (iDECON 2010). pp. 213-217. ISSN 983-2948-84-1

Samsudin, Abdul Rahim and Hambali, A and Marjom, Zolkarnain and Sivarao, Subramonian and Khairul, A A R (2010) Optimization Design of a Portable Hose Reel Using Integrated Approach. International Conference on Design and Concurrent Engineering. pp. 530-533. ISSN 983-2948-84-1

Ganesh Kumar, K. and Sivarao, Subramonian and T., Joseph Sahaya Anand (2010) An overview of Intermetallic Nickel Aluminides (Ni3Al) as an alternative Automotive Body Material. International Conference on Design and Concurrent Engineering. pp. 132-135. ISSN 983-2948-84-1

Subramaniam, Siva Kumar and Gannapathy, Vigneswara Rao and Sivarao, Subramonian and Abdul Hamid, Hamidon (2010) Flood level indicator and risk warning system for remote location monitoring using Flood Observatory System. WSEAS Transactions on SYSTEMS and Control, 5 (3). pp. 153-163. ISSN 1991-8763

Sivarao, Subramonian and T., Joseph Sahaya Anand and Hanizam, Hashim and Indra , Devi (2010) Conceptual Designs towards Developing Mechanically Controlled Semi-Automated Grass Cutter. International Journal of Mechanical and Mechatronics Engineering, 10 (4). pp. 29-33. ISSN 2077-124X

Sivarao, Subramonian and Salleh, Mohd Shukor and T., Joseph Sahaya Anand and Abd Rahman, Ammar (2010) DOE Based Statistical Approaches in Modeling of Laser Processing – Review & Suggestion. International Journal of Engineering & Technology IJET-IJENS. pp. 1-8. ISSN 2077-1185

Sivarao, Subramonian and Siva Kumar, Subramaniam and Mazran , Esro and T., Joseph Sahaya Anand (2010) Electrical & Mechanical Fault Alert Traffic Light System Using Wireless Technology. International Journal of Mechanical and Mechatronics Engineering, 10 (4). pp. 19-22. ISSN 2077-124X

Suresh, Kumar and Sivarao, Subramonian and Guan, Tan Kim and Harun, Fuaida (2010) Influence of Wafer Probing Against Initial Bonding. 34th International Electronic Manufacturing Technology Conference, 2010. pp. 1-8. ISSN 1089-8190

Sivarao, Subramonian and Nur, Izan and T., Joseph Sahaya Anand and Fairuz, Dimin (2010) Investigation of Chemical Composition on Widely Used Al 6061-T6511 Engineered Material: An XRD Analysis Towards Improvement of Mechanical Properties. International Journal of Basic & Applied Sciences, 10 (4). pp. 1-6. ISSN 2077-1223

Sivarao, Subramonian and Fairuz, Dimin and T. , Joseph Sahaya Anand and Ahmad, Kamely (2010) Investigation of Tangential Force, Horsepower and Material Removal Rate Associating HAAS CNC Milling, Al6061-T6511 Work Material & TiAlN Coated End Mill Tool. International Journal of Basic & Applied Sciences, 10 (4). pp. 23-28. ISSN ISSN: 2077-1223

Sivarao, Subramonian and T., Joseph Sahaya Anand and Abd Rahman, Ammar and Salleh, Mohd Shukor (2010) RSM Based Modeling for Surface Roughness Prediction in Laser Machining. International Journal of Engineering & Technology, 10 (4). pp. 32-39. ISSN 2077-1185

Sivarao, Subramonian and T.J.S, Anand and Ariff, Hambali and Minhat, Mohamad and Azni, Faizul (2010) Review of Automated Machines towards Devising A New Approach in Developing Semi-Automated Grass Cutter. International Journal of Mechanical & Mechatronics Engineering IJMME-IJENS Vol: 10 No: 04, 10 (4).

Sivarao, Subramonian and Ammar, Abd Rahman and T., Joseph Sahaya Anand and Salleh, Mohd Shukor (2010) Stochastic Modeling and Optimization of Laser Machining by Response Surface Methodology. International Journal of Engineering & Technology, 10 (04). pp. 13-21. ISSN 2077-1185

Sivarao, Subramonian and Fairuz, Dimin and T., Joseph Sahaya Anand and Jamil, Ridzuan and Ahmad , Kamely (2010) Surface Quality Investigation of Al 6061-T6511 Using TiAlN Coated Milling Tool. International Journal of Basic & Applied Sciences, 10 (4). pp. 55-59. ISSN 2077-1223

Sivarao, Subramonian (2009) GUI Based Mamdani Fuzzy Inference System Modeling To Predict Surface Roughness in Laser Machining. International Journal of Electrical & Computer Sciences, 9 (9). pp. 281-287. ISSN 2077-1231

Sivarao, Subramonian and Rizal, M S and Ahmad , Kamely (2009) An Investigation Toward Development Of Economical Brake Lining Wear Alert System. International Journal of Engineering & Technology, 9 (9). pp. 251-256. ISSN 2077-1185

Sivarao, Subramonian and Taufik, , (2009) Machining Quality Predictions: Comparative Analysis of Neural Network and Fuzzy Logic. International Journal of Electrical & Computer Sciences, 9 (9). pp. 451-456. ISSN 2077-1231

Sivarao, Subramonian (2009) Modeling, Testing and Experimental Validation of Laser Machining Micro Quality Response by Artificial Neural Network. International Journal of Engineering & Technology, 9 (9). pp. 161-166. ISSN 2077-1185

Sivarao, Subramonian and Tajul Ariffin, Abdullah (2009) Surface Roughness Prediction in Deep Drilling by Fuzzy Expert System. International Journal of Mechanical and Mechatronics Engineering, 9 (9). pp. 331-335. ISSN 2077-124X

Sivarao, Subramonian and Thoguluva Raghavan, Vijayaram (2009) Determination of tensile, flexural properties and microstructural characterization of calcium carbonate filler reinforced polypropylene matrix composites. Transactions of The Indian Institute of Metals, 62 (3). pp. 1-4. ISSN 0972-2815

Sivarao, Subramonian (2009) ANFIS Modeling of Laser Machining Responses by Specially Developed Graphical User Interface. International Journal of Mechanical and Mechatronics Engineering, 9 (9). pp. 181-189. ISSN 2077-124X

Sivarao, Subramonian and T., Joseph Sahaya Anand and Mohd Warikh, Abd Rashid (2009) Engineering of Tire Pressure Controlling Device: An Invention Towards Successful Product Development. International Journal of Basic & Applied Sciences IJBAS, 9 (9). pp. 261-264. ISSN 2077-1223

Sivarao, Subramonian (2009) GUI Based ANFIS Modeling: Back Propagation Optimization Method for CO2 Laser Machining. International Journal of Intelligent Information Technology Application, 2 (4). pp. 191-198. ISSN 1999-2459

Sivarao, Subramonian (2009) Mamdani Fuzzy Inference System Modeling to Predict Surface Roughness in Laser Machining. International Journal of Intelligent Information Technology Application, 2 (1). pp. 12-18. ISSN 1999-2459

Sivarao, Subramonian (2009) Modelling of laser processing cut quality by an adaptive network-based fuzzy inference system. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C - JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 223 (10). pp. 2369-2381. ISSN 0959-6518

Sivarao, Subramonian (2009) A New Approach of Adaptive Network-based Fuzzy Inference System Modeling in Laser Processing-A Graphical User Interface Based. Journal of Computer Science, 5 (10). pp. 704-710. ISSN 1549-3636

Thoguluva Raghavan, Vijayaram and Sivarao, Subramonian (2008) Surface Finish Investigation on Anchor-Shaped lead castings. Indian Foundry Journal, 54 (6). pp. 27-30. ISSN 0379-5446

Sivarao, Subramonian (2004) Comparison of statistical and mathematical methods for determination of tool wear in drilling. Journal of Mechanical Engineering, 55 (4). pp. 187-198. ISSN 0039-2472

Book Chapter

Md Ali, Mohd Amran and Raja, Izamshah and Abu Bakar, Mohd Hadzley and Sivarao, Subramonian and Hussein, Nur Izan Syahriah (2012) Mechanical Properties of Polypropylene Composites Containing Polymer Fibers. In: International Conference on Design and Concurrent Engineering, iDECON2012. Universiti Teknikal Malaysia Melaka, pp. 239-242. ISBN 978-967-0257-16-7

Sivarao, Subramonian (2009) Neural Network Multi Layer Perceptron Modeling For Surface Quality Prediction in Laser Machining. In: Application of Machine Learning. In-Tech Publication-Austria, Austria, pp. 51-61. ISBN 978-953-307-035-3

Conference or Workshop Item

David, Thevaneyan Krishta and Krishnamoorthy, Renga Rao and Sivarao, Subramonian and Ramesh, S. (2023) Compressive and flexural strength of coal bottom ash lightweight concrete. In: 8th Brunei International Conference on Engineering and Technology 2021, BICET 2021, 8 November 2021 through 10 November 2021, Bandar Seri Begawan.

Sivarao, Subramonian and Prasath, K.P. and Ramesh, S. and Kadirgama, Kumaran and Pujari, S. and Vatesh, Umesh Kumar and Salleh, Mohd Shukor and Ali, Mohd Amran and Maidin, Shajahan (2023) Modelling of surface roughness for glass-assisted co2 laser machined p-type silicon wafer. In: 8th Brunei International Conference on Engineering and Technology 2021, BICET 2021, 8 November 2021 through 10 November 2021, Bandar Seri Begawan.

Mohd , amran and Salmah, Siti and Hussein, Nur Izan Syahriah and Raja, Izamshah and Mohd , Hadzley and Sivarao, Subramonian and Kasim, Mohd Shahir and Sulaiman, Mohd Amri (2013) Effects of Machine Parameters on Surface Roughness Using Response Surface Method in Drilling Process. In: Malaysian International Tribology Conference , November 18-20, 2013, Kota Kinabalu, Sabah, Malaysia.

Sivarao, Subramonian and Qumrul, Ahsan and Mohd Amran, Md Ali and T.J.S, Anand and RAJA ABDULLAH, RAJA IZAMSHAH and Aziz, Alif (2013) Friction Performonce Anolysis of woste Tire Rubber Powder Reinforced polypropylene using pin-on-Disk Tribometer. In: Malaysian International Tribology Conference ( MITC), November 18-20, Kota Kinabalu, Sabah.

Sivarao, Subramonian and Dimin @ Mohd Amin, Mohd Fairuz and Faris N. M. F. and Arep @ Ariff, Hambali and Dhar Malingam, Sivakumar and Salit, Mohd Sapuan (2013) Analytical hierarchy process for design selection of micro hot-marking tool. In: 3rd International Conference and Exhibition on Sustainable Energy and Advanced Material, 30-31 October 2013, Melaka, Malaysia.

Sivarao, Subramonian and Aziz, Alif and Hambali, A and Salleh, Mohd Rizal and T.J.S, Anand and Raja, Izamshah and Nur, izan and A.R.M, Warikh (2013) SUPER ENERGY SAVING LOCKING SYSTEM (SES- LOCK). In: Program Pemindahan Ilmu (KTP01), 21 Ogos, Bangi Malaysia.

Mohd , amran and Salmah, Siti and Zaki, M and Raja, Izamshah and Mohd , Hadzley and Sivarao, Subramonian and Mohd Shahir, Kasim and Mohd Amri , Sulaiman (2013) Study the effects of pressure on warpage of dumbbell plastics part in injection moulding machine. In: International Manufacturing Engineering Conference (iMEC 2013), 1-3 July 2013, Gambang, Kuantan, Pahang, Malaysia.

T., Joseph Sahaya Anand and Sivarao, Subramonian and K., Ganesh Kumar (2012) Mechanical and Chemical Properties of intermetallic Ni3Al for Automotive Body. In: Seminar Hasil Penyelidikanm, KPT, 8 - 9 November 2012, AKEPT, Bandar Enstek,KL.

Md Ali, Mohd Amran and Mohd Sani, Siti Salmah and Raja Abdullah, Raja Izamshah and Abu Bakar, Md Ali and Sivarao, Subramonian and HUSSEIN, NUR IZAN SYAHRIAH and Hussain, Mohamad Zaki (2012) Optimization Parameters of Injection Moulding Machine For Reducing Warpage of Dog Bone Plastic Part. In: The 28th International Conference Of The Polymer Processing Society (PPS-28), 11-15 December, Pattaya.

Taufik, Haryoni and Siti Umi Hani, Mohamed and Sivarao, Subramonian and Tajul Ariffin, Abdullah (2010) Design and Analysis of Long Cylindrical Workpiece Fixtures. In: The 2 nd International Conference on Engineering and ICT, 18th-20th February 2010, Melaka.

Ganesh , Kumar and Sivarao, Subramonian and T., Joseph Sahaya Anand (2010) Intermetallic Nickel Aluminides as alternating Automotive Body Materials. In: National Conference on Advanced Manufacturing & Material Engineering 2010, 25th to 26th May 2010, Universiti Tun Hussein Onn Malaysia, Johor.

Sivarao, Subramonian and Abu Bakar, Muhamad Diah (2009) Automatic Tyre Pressure Controller (ATPC). In: National Conference on Bumiputra Small Medium (SME) Industries, Academy of Malaysian SMEs, 10-11 March, 2009, Putra World Trade Centre (PWTC), Kuala Lumpur.

Sivarao, Subramonian and Azhar Shah, Abu Hassan and Rizal, M S and Ahmad , Kamely and Tajul Ariffin, Abdullah and Taufik, , (2009) CHARACTERIZING CHICKEN EGGSHELL REINFORCED POLYPROPYLENE (PP). In: The International Conference on Advances in Materials and Processing Technologies (AMPT ‘09), 26-29 October 2009, Kuala Lumpur, Malaysia.

Sivarao, Subramonian and Taufik, , (2009) Comparative Quality Investigation of Rolled and Flat Carbon Steel Plates in Drilling. In: International Conference On Engineering &ICT (ICEI’07), 27-28 Nov. 2007, Equatorial Hotel, Melaka.

Taufik, , and Sulaiman, S and Abdullah, T.A. and Sivarao, Subramonian (2009) DESIGN AND SIMULATION ON CAST METAL MATRIX COMPOSITE BY INVESTMENT CASTING. In: The International Conference on Advances in Materials and Processing Technologies , 26-29 October 2009, Kuala Lumpur, Malaysia.

Taufik, , and Sulaiman, S and Abdullah, T.A. and Sivarao, Subramonian (2009) DESIGN AND SIMULATION ON COMPRESOR METAL MATRIX COMPOSITE BY INVESTMENT CASTING. In: The International Conference on Advances in Materials and Processing Technologies (AMPT ‘09), 26-29 October 2009, Kuala Lumpur, Malaysia.

Taufik, , and Ong, Chee Shen and Tajul Ariffin, Abdullah and Sivarao, Subramonian (2009) Design and Analysis of Multi LED Machine Fixture. In: International conference on Applications and Design in Mechanical (ICADME ‘09), 11-13 October 2009, Penang, Malaysia.

Sivarao, Subramonian and Tajul Ariffin, Abdullah and Taufik, , (2009) Design and Development of Automatic Tyre Pressure Controller. In: International conference on Applications and Design in Mechanical (ICADME ‘09), 11-13 October 2009, Penang, Malaysia.

Sivarao, Subramonian and Rizal, M S and Tajul Ariffin, Abdullah and Taufik, , (2009) Development of Man-Machine Interface Using Matlab: An Adaptive Network-Based Fuzzy Inference System Modeling For Laser Machining. In: International Conference on Man Machine Systems (ICoMMS ‘09), 11-13 October 2009, Penang, Malaysia.

Sivarao, Subramonian and Azhar Shah, Abu Hassan and Rizal, M S and A. M., Kamely and Tajul Ariffin, Abdullah and Taufik, , (2009) MECHANICAL PROPERTIES MODIFICATION OF POLYETHYLENE (PE) FOR CaCO3 PARTICULATED COMPOSITES. In: The International Conference on Advances in Materials and Processing Technologies (AMPT ‘09), 26-29 October 2009, Kuala Lumpur, Malaysia.

Sivarao, Subramonian and Tajul Ariffin, Abdullah and Taufik, , (2009) Micro Sensor Embedded Brake Pad Monitoring System. In: International conference on Applications and Design in Mechanical (ICADME ‘09), 11-13 October 2009, Penang, Malaysia.

Samsudin, Abdul Rahim and Sivarao, Subramonian (2008) Effect of Pressure, Frequency and Duty Cycle on Laser Cut Surface. In: Malaysian Technical Universities Conference on Engineering and Technology, March 8-10, 2008, Putra Palace, Perlis, Malaysia.

Taufik, , and Shajahan, Maidin and Sivarao, Subramonian (2008) DESIGN RULES OPTIMIZATION IN DESIGNING OF SHEET METAL PART. In: REACH'07, 18 - 20 January 2008, Kuala Lumpur.

Kasim, Mohd Shahir and Salleh, Mohd Rizal and Sivarao, Subramonian (2008) Experimental Investigation of Significance Parameters in Surface Grinding – Quality Evaluation. In: National Conference on Design & Concurrent Engineering, 28-29 October 2008, Melaka.

Sivarao, Subramonian and sivasan, karan nair (2008) Regression Model Development For Two Layer Control System Based on Engine RPM. In: Curtin University of Technology Science and Engineering International Conference 2008 (CUTSE 2008), 24 – 27 November 2008, Curtin University of Technology, Miri, Sarawak. (Submitted)

Sivarao, Subramonian (2008) Super Saving Cooling System: A New Design and Analysis for Home Air-Conditioning. In: Curtin University of Technology Science and Engineering International Conference 2008 (CUTSE 2008), 24 – 27 November 2008, Curtin University of Technology, Miri, Sarawak.

Sivarao, Subramonian (2007) MICRO QUALITY INVESTIGATION OF Mn-Mo PRESSURE VESSEL PLATE IN LASER MACHINING. In: World Engineering Congress 2007, 5 – 9 August 2007, Penang, Malaysia.

Sivarao, Subramonian and Samsudin, Abdul Rahim and Taufik, , and Ammar, Abd Rahman (2007) Coating Characterization of TiN & TiAlN on Burr Formation in Drilling – Pragmatic Investigation. In: International Conference on Engineering &ICT (ICEI’07), 27-28 Nov. 2007, Equatorial Hotel, Melaka.

Sivarao, Subramonian and Taufik, , (2007) Coating characterization of TiN & TiAIN on burr formation in drilling pragmatic investigation. In: International Conference on Engineering and JCT (ICE! 2007),, 27 -28 Nov 2007, Hotel Equatorial Melaka.. (Submitted)

Sivarao, Subramonian and Taufik, . (2007) Comparative quality investigation of rolled and flat carbon steel plates in drilling. In: International Conference on Engineering and ICT (ICEI 2007), 27 -28 Nov 2007, Hotel Equatorial Melaka.. (Submitted)

Sivarao, Subramonian and Taufik, , (2007) Design and Development of an Automobile Brake Lining Monitoring System. In: International Conference on Engineering &ICT (ICEI’07), 27-28 Nov. 2007, Equatorial Hotel, Melaka.

Sivarao, Subramonian (2007) LINGUISTIC FUZZY MODELING IN LASER MACHINING QUALITY EVALUATION. In: Malaysian Science and Technology Congress (MSTC2007), 4-6 September 2007, Holiday Villa, Kuala Lumpur.

Sivakumar, Dhar Malingam and Sivarao, Subramonian and Ahmad, Rivai and Tan , Chee Fai and Mohd Radzai , Said (2006) BUCKLING BEHAVIOUR OF ANGLE SECTION BEAM WITH THE UNSTIFFENED FLANGES IN COMPRESSION. In: National Conf. On Design and Concurrent Engineering (DECON 2006), 9-10 August 2006, Melaka, Malaysia.

Sivakumar, Dhar Malingam and Sivarao, Subramonian and Tan, Chee Fai (2006) ENGINEERING AESTHETICS AND AESTHETICS ERGONOMICS EVALUATION TOOLS IN PRODUCT DESIGN AND DEVELOPMENT. In: National Conf. On Design and Concurrent Engineering (DECON 2006), 9-10 August 2006, Melaka, Malaysia.

Sivarao, Subramonian (2005) FUZZY MODELING OF TOOL WEAR IN DRILLING. In: 18th International Congress of Mechanical Engineering, November 6-11, 2005, Ouro Preto, MG .

Book

Hussein, Nur Izan Syahriah and Md Ali, Mohd Amran and Sivarao, Subramonian (2012) Effect of CNC Ball Nose End Milling Process Parameters on Surface Roughness and Chip Length of Aluminium Alloy 6061. Universiti Teknikal Malaysia Melaka, pp. 1-3. ISBN 978-967-0257-16-7

Sihombing, Haeryip and Yuhazri, Yaakob and YAHAYA, SAIFUDIN HAFIZ and Sivarao, Subramonian and Hazwan, M.A (2012) An Analysis of Quality Criteria to Determine the Improvement Priority Attributes. Universiti Teknikal Malaysia Melaka, pp. 489-493. ISBN 978-967-0257-16-7

Raja, Izamshah and Abu Bakar, Mohd Hadzley and Mohd , amran and Sivarao, Subramonian (2012) Effects of End Mill Clearance Angle on Surface Error for Machining Low Rigidity Aerospace Structure Component. Universiti Teknikal Malaysia Melaka, pp. 308-312.

Sivarao, Subramonian and Mohd Shukor, Salleh and T. Joseph, Sahaya Anand and Syamimi , Samsudin and Ian Peter, Hasoloan Haery (2011) A Compilation Of Various Research In Manufacturing Engineering Part 1. Penerbit Universiti Teknikal Malaysia Melaka, pp. 1-178.

ahmad kamely, mohamad and Sachlan, Ermansyah and Sivarao, Subramonian (2011) PREDICTION OF THE BENDING STRENGTH USING RESPONSE SURFACE METHODOLOGY. Curran Associates, Inc, 57 Morehouse Lane ,Red Hook, NY 12571 USA , United State. ISBN 978-1-4577-0005-7

Taufik, , and Aman, Shah and Abdullah, T.A. and Sivarao, Subramonian (2010) Design Rules for Sheet Metalworking Based on Design for Manufacture (DFM) Methodology. Universiti Teknikal Malaysia Melaka, pp. 219-223.

Sivarao, Subramonian (2010) Characterization Of Calcium Carbonate Particulated Polyethylene. LA Publishing, Germany. ISBN 978-3-8433-8630-2

Sivarao, Subramonian (2010) Design and Development of Unmanned Grass Cutter. LA Publishing, Germany. ISBN 978-3-8433-5267-3

Sivarao, Subramonian (2010) Modeling of Laser Materials Processing by Artificial Neural Network Modeling and Experimental Validation. VDM Publishing, Mauritius. ISBN 978-3-639-31529-5

Sivarao, Subramonian (2010) Quality and Performance Analysis of CO2 Laser machining - A Complete Guide For Laser Machining Experimentation and Cut Edge Quality Evaluation. LA Publishing. ISBN 978-3-8433-8162-8

Sivarao, Subramonian (2010) Tire Inflation Technology; Existing and Evolution To Be Advancements in Tyre Inflating Technology. LA Publishing, Germany. ISBN 978-3-8383-8502-0

Patent

Sivarao Subramonian (2015) Bio-based hybrid nano compositions for sealing pneumatic inflated mediums. IP 2015703853.

Mohd Asyadi ‘Azam Mohd Abid (2015) Electrochemical Capacitor And A Method Of Growing Vertically Aligned Carbon Nanotube On Conducting Substrate Of Electrodes. PI 2015703500.

Qumrul Ahsan (2015) A method of Fabricating Recycled Carbon Fibre Composite Moudled article. PI 2015702294.

Sivarao Subramonian (2015) Rapid hot marking tool. PI 2015702286.

Sivarao Subramonian (2012) A Tyre Pressure Sustaining System (T-PreSS). PI 2012002728.

Sivarao Subramonian (2012) An Automatic Tyre Inflating System (ATIS). PI 2012002727.

Sivarao Subramonian (2012) Hydo-gas Airless Tyre (HAT). PI 2012701286.

Sivarao Subramonian (2012) Magnetic Airless Tyre (MAT). PI 2012701282.

Sivarao Subramonian (2012) Supa Fast Key-Less Grill Locking System. PI 2012002778.