Items where Division is "Library > Tesis > FKP" and Year is 2018

Thesis

Abd Aziz, Syazxerlin (2018) Prediction Of Tool Wear Characteristics In Turning On Inconel 718 : Experimentation And Simulation. Masters thesis, Universiti Teknikal Malaysia Melaka.

Abd Rashid, Shafiyah (2018) Development Of Finger Type Tactile Sensor With Surface Roughness Analysis. Masters thesis, UTeM.

Abd Samad, Sofian (2018) An Effect Of Surface Roughness To Colour Sensor Detection Range In Ambient Temperature. Masters thesis, Universiti Teknikal Malaysia Melaka.

AbdulAziz Alneaimi, Hozaifah (2018) Quality Enhancement In Production Of Safety Pins Through The Implementation Of Kaizen Activity. Masters thesis, Universiti Teknikal Malaysia Melaka.

Abdullah, Herryanni (2018) Designing a home fertigation system using coco peat. Masters thesis, Universiti Teknikal Malaysia Melaka.

Abdullah, Ilyana (2018) A New Equipment Effectiveness And Sustainability Performance Model For Palm Oil Mill. Doctoral thesis, UTeM.

Adnan, Nor Hafizah (2018) Effect Of Fiber Orientation And Composition Percentage To The Properties Of Particle Board From Banana Fiber. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ahmad, Suraya (2018) A Framework For Sustaining Lean Thinking With Systems Thinking In Malaysian Aerospace Companies. Doctoral thesis, UTeM.

Anang, Nur Amira (2018) Design Of Cascade NP/PI Controller For Cutting Force Compensation Of Ball Screw Driven System. Masters thesis, Universiti Teknikal Malaysia Melaka.

Asih, Hayati Mukti (2018) Capacity Planning For Mixed-Load Tester Under Demand And Testing Time Uncertainty. Doctoral thesis, UTeM.

Awang, Nurfadzylah (2018) Implementation of vision system for defects classification method using international standard welding imperfection. Masters thesis, Universiti Teknikal Malaysia Melaka.

Azhar, Emmy Nurulazwana (2018) Effect of quarry dust composition on the properties of nickel-quarry dust composite coatings. Masters thesis, Universiti Teknikal Malaysia Melaka.

B. Rajendran, Saravaaneshwaran (2018) Reduction of retaping lots for TPMS production line using Six Sigma. Masters thesis, Universiti Teknikal Malaysia Melaka.

Badaruddin, Nur Izayu (2018) Optimization of secondary bonding in layup process based on six sigma method. Masters thesis, Universiti Teknikal Malaysia Melaka.

Balai, Lorita Lawi (2018) Comparison of properties of polypropylene fiber glass in injection moulding process using different gate locations. Masters thesis, Universiti Teknikal Malaysia Melaka.

Balrwein, Hussein Tawfiq Saeid (2018) Evaluation of the Skills Gap for Progression towards the Fourth Industrial Revolution in Libya. Masters thesis, Universiti Teknikal Malaysia Melaka.

Chiew, Tsung Heng (2018) Super Twisting Sliding Mode Controllers And Kalman-Bucy Filter For Single Axis Positioning System. Doctoral thesis, UTeM.

Chong, See Ying (2018) Stab resistant analysis for body armour design features manufactured via fused deposition modeling process. Masters thesis, Universiti Teknikal Malaysia Melaka.

Chung, Kar Yee (2018) Productivity Improvement Through Work System Design Method For Better Man Power Utilization At Robot Welding Process. Masters thesis, Universiti Teknikal Malaysia Melaka.

Devadas, Saandilian (2018) Remote global alignment error for cycle time improvement of pad inductor layer. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Ganasan, Umadewi (2018) Elimination of gold tarnish by post dip after gold plating process in flexible printed circuit board manufacturing. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ganesan, Hema Nanthini (2018) Optimization of dimple configurations on heat dissipation of aluminium flat surface. Masters thesis, Universiti Teknikal Malaysia Melaka.

Hashim, Md Assri (2018) Development of lean construction framework for 'rumah komuniti' project. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ishak, Anuar (2018) Enhancement of cleaner production assessment to identify workplace waste and hazard by value stream mapping. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ishak, Mazlan (2018) Investigation of the Compression Failure in Woven Carbon Laminate Composite. Masters thesis, Universiti Teknikal Malaysia Melaka.

Jamaluddin, Khairuddin (2018) Failure Investigation and Product Quality Optimization for Movable Fairing Aero Composite Part. Masters thesis, Universiti Teknikal Malaysia Melaka.

Lum, Yip Hing (2018) Slow Release Behavior Of Biodegradable Starch Polyvinyl Alcohol Urea Fertilizer. Doctoral thesis, UTeM.

Mat Amin, Mohd Imran (2018) Fabricate And Investigate The Performance Of Alumina Based Ceramic Cutting Tool With Different Edge. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mazda, Nur Syahirah (2018) Wear performance of alumina based cutting tool when machined with AISI 1045 carbon steel. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohamad Roslan, Mohammad Muadz (2018) Analysis Of School Bag Weight Carriage Among Primary Students. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohamed Noor, Ahamad Zaki (2018) Prioritizing Life Cycle Cost In Design For Remanufacturing Using Intelligent Tool. Doctoral thesis, UTeM.

Mohammed AbdulGhaffar, Firas Ahmed (2018) Simulation Of Bobbin Friction Stir Welding Using Deform-3D. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Ali, Noorfa Idayu (2018) Multi-respone injection moulding process parameters optimization using Taguchi method with grey relational analysis. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mustaffa, Nurul Akmil (2018) Synthesis and mechanical analysis of electroconductive high density polyethylene polyanilinedodecylbenzenesulfonic acid/alumina composite. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Mustaffa Kamal, Muhammad Roshidi (2018) Managing Queuing Problems Through Online Booking System. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ngah Deman, Enda Nur Malia (2018) Impact test analysis on pure and recycled HDPE materials. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ong, Cheng Guan (2018) Effect of pad roughness on shear strength of thin small leadless package. Masters thesis, Universiti Teknikal Malaysia Melaka.

Osman, Hamizan (2018) Investment analysis of a new paint shop in automotive industry. Masters thesis, Universiti Teknikal Malaysia Melaka.

Osman, Nor Suriyanti (2018) Flexible robot configuration cell in manufacturing industry. Masters thesis, Universiti Teknikal Malaysia Melaka.

Radin Monawir, Radin Puteri Hazimah (2018) Human Spontaneous Emotion Detection System. Masters thesis, UTeM.

Rahman, Muhamad Hakim (2018) Improvement of vision inspection during tip to tip measurement through parameter optimization. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ramily, Nurlina Aimi (2018) Fabrication of floor tiles from recycled HDPE bottle filled recycled glass composite using hot press method. Masters thesis, Universiti Teknikal Malaysia Melaka.

Safian, Mohd Azizul Hikmi (2018) The optimization of T6 heat treatment on microstructure and mechanical properties of thixoformed LM4 aluminium alloy. Masters thesis, Universiti Teknikal Malaysia Melaka.

Salleh, Nazahiah (2018) Layout Improvement At Small And Medium Industry : A Case Study. Masters thesis, Universiti Teknikal Malaysia Melaka.

Sam, Mei Lee (2018) Properties Of Indefinite Matrix Constraints For Linear Programming In Optimal Solution. Masters thesis, UTeM.

Sapee, Mohd Sukri Sazlan (2018) Productivity improvement of mark, scan and pack process through lean Six Sigma. Masters thesis, Universiti Teknikal Malaysia Melaka.

Teo, Boon Guan (2018) Process Parameter Optimization Of Adhesive Dispense Machine. Masters thesis, Universiti Teknikal Malaysia Melaka.

Teoh, Yong Siang (2018) Development Of Overall Performance Effectiveness In Job Shop Manufacturing Process. Doctoral thesis, UTeM.

Too, Yi Wei (2018) Development Of Computer Ergonomics Risk Assessment (COM-ERA) Tool For Assessing Work-Related Musculoskeletal Disorders (WMSDS) Associated With Computing Tasks. Masters thesis, Universiti Teknikal Malaysia Melaka.

Wan Mohd Yusoff, Wan Mohd Azahar (2018) Analysis of surface intergrity and tool wear during machining high thermal conductivity steel 150 (HTCS- 150). Masters thesis, Universiti Teknikal Malaysia Melaka.

Wan Zulkifli, Wan Amirul Shafiz (2018) The effects of surface treatments on properties and corrosion protection of AZ91D magnesium alloy. Masters thesis, Universiti Teknikal Malaysia Melaka.

Wong, Kuan Lih (2018) Preliminary study of key performance indicators for sustainability in health care industry in Malaysia. Masters thesis, Universiti Teknikal Malaysia Melaka.

Yakop, Mohd Halim (2018) Automated System – Application Of AHP And Topsis Analysis For Productivity Improvement. Masters thesis, Universiti Teknikal Malaysia Melaka.

Yoong, Sai Sieng (2018) New overall equipment effectiveness framework development with integration of maynard operation sequence technique for losses visualization. Masters thesis, Universiti Teknikal Malaysia Melaka.

Zulkipli, Nur Hidayah (2018) Effects Of Argon Shielding Gas Flow Rate On Welding Quality Of Mild Steel. Masters thesis, Universiti Teknikal Malaysia Melaka.