Browse By Repository:

 
 
 
   

Items where Year is 2007

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Authors | Item Type | No Grouping
Jump to: | A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | R | S | T | V | W | Y | Z
Number of items: 996.

Mohd. Rizhuan , Othman (2007) Design For Die Casting (Spanner). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Shah , Abd Rahman (2007) Robotic Arm Spy Tanker. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Sofiuddin, Khidir (2007) CS8 Humanoid Robot (LEG 1). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Mahathir , Mohd Daim (2007) Feasibility Study Of Product Localization: A Case Study. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Salihin , Hj Abd Rahim (2007) The Study Of Eccentricity Of Circular Tube Under Quasi-Static Loading. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Othman, Abdul Rani and Wasli, Chairulsyah (2007) 2.4 GHz Microstrip Band Pass Filter. In: The 1st International Conference on Engineering and ICT, 2007, Melaka, Malaysia, 2007, Melaka.

Rajandran , Morthui (2007) Intelligent Car Parking System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Shakiroh , Mohamad Ismail (2007) Designing An Interactive Telephone Based Remote Control And Alarm System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wong , Francis Ch'ng Kang (2007) Automatic Fish Feeder For Cultivation Pond. Project Report. UTeM, Melaka, Malaysia. (Submitted)

A

A.Nasoruddin , Mohamad (2007) BENC 3173: Sistem Dan Rangkaian Komputer. [Teaching Resource]

ABD RAZAK , JEEFFERIE and Md. Akil, Hazizan and Ong, Huilin (2007) Effect of Inorganic Fillers on the Flammability Behavior of Polypropylene Composites. Journal of Thermoplastic Composite Materials, 20. pp. 195-205. ISSN 0892-7057

Ab Malik , Ibrahim (2007) Persamaan Kinematik Dan Dinamik Untuk Robot Rhino. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Ghani, M. K. and Bali, R. K. and Naguib, R. N.G and Marshall, I. M. and Shibghatullah, A. S. (2007) The Design of Flexible Front End Framework for Accessing Patient Health Records Through Short Message Service. In: IEEE Asia-Pacific Conference on Applied Electromagnetics, 4-6 December 2007, Melaka, Malaysia.

Abd Hadi , Abd Malik (2007) Control Of An Inverted Pendulum Comparison Between PID Controller And SFC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Halim, Wahidah and Azri, Maaspaliza (2007) BEKC 1323: Instrumentasi Dan Pengukuran. [Teaching Resource]

Abd Karim , Abd Razak (2007) Sistem Pembasmian Kemiskinan Bandar. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Majid, Darsono (2007) BENE 1123: Asas Kejuruteraan Elektronik. [Teaching Resource]

Abd Majid, Darsono (2007) DENT 2233: Litar Elektrik. [Teaching Resource]

Abd Manaf, Mohd Edeerozey (2007) Chemical Modification of Kenaf Fibers. Materials Letters, 61 (10). pp. 2023-2025. ISSN 0167-577X

Abd Rahman, Mahmood (2007) BMFP 4553: Pengurusan Sumber Manusia (Human Resource Management). [Teaching Resource]

Abd Samad, Md Fahmi (2007) Optimum grouping in a modified genetic algorithm for discrete-time, non-linear system identification. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART I-JOURNAL OF SYSTEMS AND CONTROL ENGINEERING, 221 (7). pp. 975-989. ISSN 0959-6518

Abdul Hafiz , Abdul Hamid (2007) Osciloskop Digital Berasaskan Komputer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Halim, Dahalan and Mohamad Harris, Misran (2007) DENT 1213: Prinsip Elektrik. [Teaching Resource]

Abdul Halim , Mustafa (2007) Investigation Of Microstrip Parallel Couple Wideband Filter (WCDMA Application). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Hamid, Hamidon and Noor Asyikin, Sulaiman (2007) BENE 2153: Elektronik Analog. [Teaching Resource]

Abdul Majid, Izaidin and Dora, Mohd Taib and Abdol Jalil , Ismail (2007) Status Pelaksanaan Kemahiran Insaniah (KI) Di Universiti Teknikal Malaysia Melaka (UTeM). In: Conference on Teaching and Learning in Higher Education (CLTHE), 12-14 December 2007, Kuala Lumpur.

Abdul Majid, Izaidin and Dora, Mohd Taib and Kamarudin, Mohd Fauzi and Hussin , Huzili (2007) BARRIERS TO BUSINESS VENTURE FORMATION. In: IKS 2007 National Conference , 2007, Kota Kinabalu Sabah.

Abdul Majid, Izaidin and Dora, Mohd Taib and Raja Abd. Rahman, Raja Roslan and Kudus, Norliah and Mat, Zawiah and Othman , Noor Maslan (2007) City as An Urban Social Diversity: A Case Study of Rukun Tetangga. In: International Seminar the Knowledge City: Spirit, Character and Manifestation, 13-14 Nov 2007, Medan Indonesia.

Abdul Majid, Izaidin and Ismail, Kamariah and Cooper, Sarah and Levie, J. (2007) ENTREPRENEURIAL MANAGEMENT ANDTECHNOLOGY-BASED FIRM PERFORMANCE. Advance Manufacturing Technology Journal . pp. 1985-3157. ISSN 1985-3157

Abdul Majid , Izaidin and Dora, Mohd Taib and Ismail, Kamariah and Hussin, Huzili (2007) City As A Human Development Ecosystem: Exploring The Characteristics Of An Entrepreneurial Region. In: International Seminar the Knowledge City: Spirit, Character and Manifestation, 13-14 Nov 2007, Medan Indonesia.

Abdul Rahim, Samsudin and Sivarao, Subramaniam (2007) Investigation Of Laser Performance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rahim , Samsudin and Sivarao, Subramoniam (2007) Experimental Investigation Of Burr Formation In Drilling. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rahman, Azrul Azwan and Kernbaum, Sebastian (2007) Simulation Based Control System for a Manufacturing System. In: Conference on Application and Design in Mechanical Engineering, 25-26 Ocktober 2007, Perlis.

Abdul Razak , Shaari (2007) Roboclimb. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Razak , Bahtrem (2007) Proses Fabrikasi Dan Pencirian Bahan Komposit Laminat Untuk Industri Kapal Terbang. Project Report. UTeM, Melaka. (Submitted)

Abdul Talib , Din and Shamsul Anuar, Shamsuddin and Mohd Yusoff , Sulaiman and Dora, Ursee (2007) The Design Of A Cost-Saving Air Conditioning System Using Earth Cooled Dehumidification Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdullah, Abdul Rahim and Mohd Saad , Norhashimah (2007) Power quality analysis using spectrogram and gabor transformation. In: Asia-Pacific Conference on Applied Electromagnetics, 2007. APACE 2007, 4 december 2007, Melaka.

Abdullah, Mardina and Ahmad Faizal Mohd. Zain, Ahmad Faizal Mohd and Sabirin Abdullah, Sabirin and Hashim, Nurbaya Mohd and Ho, Yih Hwa (2007) Penentuan Gangguan Ionosfera Bergerak Menggunakan Data GPS. Jurnal Teknologi, 47 (1). pp. 121-130. ISSN E-ISSN2180-3722

Abdullah Muttaqin, Adam Shukri (2007) Merekabentuk Struktur Dan Mekanisma Untuk Pemasangan Jig Pencengkam Pada Mesin Ujian Tegangan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Adi, Saptari and Zuhriah, Ebrahim (2007) A Human Vision Sensitivity Analysis For Designing Better Human Machine Interface. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Adi, Saptari (2007) BMFP 3533: Perancangan & Kawalan Pembuatan (Manufacturing Planning & Control). [Teaching Resource]

Adi , Saptari and Seri Rahayu , Kamat and Wan Hasrulnizzam , Wan Mahmood and Isa, Halim (2007) Optimum Workspace Design in A Plug Assembly Line. In: International Conference on Engineering and ICT (ICEI 2007), 27-28 November 2007, Hotel Equatorial Melaka.

Adi , Saptari and Seri Rahayu , Kamat and Wan Hasrul , Wan Mahmud and Isa, Halim (2007) A Plug Assembly Line: An Assessment of Workstation Design and Working Posture. Journal of Biomechanics, 40 (2). S152-S152. ISSN 0021-9290

Adie, Mohd Khafe (2007) Imaging Concentration Profile Using Laser Based Tomography. Masters thesis, Universiti Teknologi Malaysia.

Adie , Mohd Khafe (2007) DENG 1113: Asas Elektronik & Mikropemproses. [Teaching Resource]

Ady Izwan , Omar (2007) Video Graphic Array (VGA) Generator Using Complex Programmable Logic Device (CPLD). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad, Ibrahim (2007) Macromedia Flash 8: pengenalan. Venton Publishing (M) Sdn Bhd, Kuala Lumpur. ISBN 983-3526-48-9

Ahmad, Ibrahim and Zakaria, Mohd Hafiz and Mohammed, Norazlin and Azman, Farah Nadia and Salam, Sazilah and Romli, Rusnida and Mat Sah, Shahrul Badariah and Abdullah, Mohd Haziq Lim (2007) Information and communication technology (ICT) based on SPM syllabus. Venton Publishing (M) Sdn Bhd. ISBN 978-983-3526-75-8

Ahmad, Mohd Riduan and Dutkiewicz, Eryk and Huang, Xiaojing (2007) BER-delay characteristics analysis of IEEE 802.15.4 wireless sensor networks with cooperative MIMO. In: Applied Electromagnetics, 2007. APACE 2007. Asia-Pacific Conference on, 4-6 Dec 2007, Melaka, Malaysia.

Ahmad, Azhar (2007) Mitigation of triplen harmonics in 3-phase 4-wire electrical distribution system. Masters thesis, Universiti Teknikal Malaysia Melaka .

Ahmad Dainuri, Sulaman (2007) PC Controlled LCD And Thermostat By Using Borland Turbo C++. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Fadzli Nizam, Abdul Rahman and M.A., Burhanuddin and Zuraida , Abal Abas and Siti Azirah, Asmai (2007) Mathematics for Computer Science I (Calculus). Technical Report. Fakulti Teknologi Maklumat dan Komunikasi, Fakulti Teknologi Maklumat dan Komunikasi.

Ahmad Fakhruddin , Yusoff (2007) Pembangunan Perisian Untuk Pengimbas Kod Bar. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Falah , Zainol Azzudin (2007) Generate High Frequency Mechanical Vibration. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Fauzi, Ahmad Kamar (2007) Simulation Study Of Motor Controller via Voice Command. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Fuad, Ab Ghani (2007) Asset Management Issues During Design And Construction Phase In Construction Industry. Masters thesis, University of Manchester.

Ahmad Latifi, Yaacob (2007) Investigation Of Machining Defects On Rolled Steel Plate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Nizam , Mohd Jahari @ Mohd Johari (2007) DENE 3363: Automasi Industri. [Teaching Resource]

Ahmad Rashidi , Ahmad Fauzy (2007) Infrared Robotic Using Microcontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Sadhiqin, Mohd Isira (2007) Active Steering System Based On Nonlinear Control System. Masters thesis, UTM.

Ahmad Syirwan Adli, Hamzah (2007) Analysis Of The Influence Of Electrical Discharge Machine Die Sinking Parameters On material Removal Rate Of Mild Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Yusairi, Bani Hashim (2007) BMFA 4453: Sistem Penderiaan & Penglihatan (Vision & Sensor system). [Teaching Resource]

Ahmad Zakhirie , Mohamad (2007) A Study Of Design And Development Of 'Songket' Weaving Automatic Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Zubir , Jamil (2007) Sun Sensor. Masters thesis, The University of Sheffield.

Aida Fazliana , Abdul Kadir and Jurifa , Mat Lazi and Ain Ain, Nur Hanafi and Mohd Hafiz , Zainuddin (2007) Computer aided education on special transformer as interactive approach in power engineering education. In: International Conference on Engineering and ICT (ICEI 2007) , 27-28 November 2007, Melaka, Malaysia. (Submitted)

Aisyah Almajidaf Tan, Sofian Tan (2007) Effectiveness Of Oil Consumption At Motoring Test Case Study: Automotive Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aizilia , Mat Affim (2007) Development Of A 3G Bandpass Filter Using Microstrip Technologies. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aizuddin , Pata Ariffin (2007) Design And Development Of CIM System - Lifter Platform. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Ajmal , Muhamad Sazali (2007) Propeller Led Display. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Akhmal Khalis , Mohamad Isa (2007) Mobile Game-Grab More Money. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ali Adzha , Ishak (2007) Pengiraan Dan Analisis Bagi Gear Transmisi Menggunakan Pengaturcaraan Komputer Papan Pemuka Bergrafik. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ali Leghari, Zulfiqar and Othman, Abdul Rani and Mohd Ibrahim, Imran and Abu, Maisarah (2007) Design Aspects of WINDS Ground Facility for Malaysia. In: Recent Advances in Space Technologies, 2007. RAST '07. 3rd International Conference on, 14-16 June 2007.

Alias , Khamis (2007) Design And Simulation Of A high Thrust Linear Oscillator Actuator. Masters thesis, Universiti Putra Malaysia.

Amat Amir , Basari (2007) DENE 3153: Prinsip Kawalan. [Teaching Resource]

Amat Amir , Basari (2007) DENE 3152: Instrumentasi. [Teaching Resource]

Ameyrullah, Arshad (2007) Merekabentuk Dan UjIkaji Penunjuk Paras Kandungan LPG Di Dalam Selinder. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aminudin, Aman (2007) The Effects Of Multiple Lightning Impulse On The Electrical Characteristics Of Opto-Isolator As Surge Protective Devices. Masters thesis, UTM.

Amir Hanin , Yazid (2007) Productivity Improvement Using One Piece Flow Techniques : A Study At An Electronic Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ammar , Mohd Saufian (2007) Roboclip (Pencengkam). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Anas Imran , Ghazali (2007) An Analysis Of Network Performance At Kementerian Perumahan Dan Kerajaan Tempatan Using Opnet Modeler. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Andrew , Arih (2007) Stress And Deformation Analysis On PCB Depaneling. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Anuar , Piji (2007) Modeling And Analysis Of Desmodromic Valve Train. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Anuar Jeffry , Rohim (2007) Design And Development Amateur Radio Transmitter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Anuratha, Segar (2007) Bahasa Isyarat Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ariffin , Hashim (2007) Research On Mechanical System Used In Oil And Gas Industry (Research And Improve Mechanical Seal). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Arvin , Cheah (2007) PDA : Unit Converter With Health And Travel Toolkit. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Asaari , Mohd Muji (2007) CS-8 Humanoid Robot (Body). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Asbullah, Sukri (2007) Hardware Development Of Mixture Drinks Dispenser. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Asmah , Ahmad (2007) Develop Hardware For Automatic Baby Milk Mixer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Asniza , Muhidin (2007) Automated Juice Mixer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Asreen Anuar , Abd Aziz (2007) Design A UWB Amplifier Based On CSSDA For UWB Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Asru Rozimin , Abu Bakar (2007) Programming And Interfacing Master Slave (Parent-Child) Robot For Painting Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Asrul Izwan , Mohd Salleh (2007) Roboclimb (Body And Traverse). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azahari, Salleh (2007) Radio Frequency Front End Design Of Radio Access Point Downlink For Radio Over Fiber Technology. Masters thesis, UTM.

Azizah, Shaaban (2007) BMFB 3213: Teknologi Plastik (Plastic Technology). [Teaching Resource]

Azizah, Shaaban (2007) BMFB 3213: Teknologi Plastik (Plastic Technology). [Teaching Resource]

Azizan Firdaus, Mohamad (2007) Kawalan Frekuensi Lampau Lebih Dan Kurang Pada Model Turbin Gas Menggunakan Pengawal Tambahan Logik Fuzzi. Project Report. UTeM, Melaka. (Submitted)

Azizi , Kamaruddin (2007) Design And Development Path Finding Robot Using Line Tracking. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azizul , Mokhtar (2007) Line Balancing And Optimization For Single Model Assembly Line At A Small Medium Industry (SMI). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azman, Hamzah (2007) XY Palletizing Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azmi, Awang Md Isa and Zahriladha, Zakaria and Fauzi, Mohd Johar (2007) In-Flight Prayer Times And Qiblat Direction Using GPS. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azrin , Mohamad Effandy (2007) The Improvement And Fabrication Of New Breather Valve For Oil And Gas Industry. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Azrina, Mastor (2007) Sistem Kawalan Automatik Menggunakan Penggesan Ultrasonik. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azrita , Alias and Syed Najib , Syed Salim and Che Amran, Aliza and Hamimi Fadziati , Abdul Wahab (2007) BEKC 2543: Kejuruteraan Sistem Kawalan. [Teaching Resource]

Azrul , Jasni (2007) Portable Cocoa Bunch Wrapping Device. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azrul Hiza , Muhamad Azraai (2007) Rekabentuk Kipas Penyejuk Segar. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azuraini, Muda (2007) Membangunkan Sistem Perisian Untuk Kawalan Litar Elektrik Menggunakan Suara. Project Report. UTeM, Melaka, Malaysia. (Submitted)

B

Badrolhisam , Jaafar (2007) Analisis Pembetulan Faktor Kuasa Menggunakan Kapasitor Statik. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Bagas, Wardono (2007) BMFG 4813: Sistem Pembuatan. [Teaching Resource]

Bagas, Wardono (2007) BMFG 4813: Sistem Pembuatan. [Teaching Resource]

Bahari, Norhazilina (2007) Insulated-Gate Bipolar Transistor (IGBT) Inverter With Vector Modulation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Bakar, N. (2007) Virtual Laboratory for Chemistry (VLab-Chem) Based on Constructivism-Cognitivism-Contextual Approach. In: E-Learn 2007 World Conference on E-Learning in Corporate, Government, Healthcare, & Higher Education.

Bakar, N. and Badioze Zaman, H. (2007) Development of VLAB-CHEM for Chemistry subject based on Constructivism-Cognitivism-Contextual approach. In: Proceeding of The International Conference on Electrical Engineering and Informatics, ICEEI 2007. School of Electrical Engineering and Informatics, Institue Teknologi Bandung, Bandung Indonesia, pp. 568-571. ISBN 978-979-16338-0-2

Bakar, N. and Badioze Zaman, H. and Shahbodin, F. (2007) Development of VLAB-CHEM for form four student based on constructivism-cognitivism-contectual approach. Journal of Technology Management and Entrepreneurship, 6 (1). pp. 75-96. ISSN 1675-8404

Basari, Amat Amir and Md Sam, Yahaya and Hamzah, Norhazimi (2007) Nonlinear Active Suspension System With Backstepping Control Strategy. In: 2007 Second IEEE Conference on Industrial Electronics and Applications, 23 Mei ~ 25 Mei 2007, Harbin, China.

Bastiah, Mohd Nazri (2007) Fan Automated System Using Temperature Sensor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Beh, Teik Siong (2007) LED Bending Machine Fixture. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Benny Doimin , Mohd Zamlan (2007) Switching Mode Power Supply Using Buck-Boost Converter-Continous Mode. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Budi, A. S. and Herawan, Safarudin Gazali and Asmala, A. and Sunaryo, S (2007) Properties and Structure of RO‐R2O‐Na2O‐Al2O3‐P2O5 Glasses. American Institute of Physics (AIP) Conference Proceedings, 909. pp. 193-196. ISSN 1551-7616

Burhanuddin, Mohd Aboobaider and Mohammad Ishak, Desa and Zeratul Izzah, Mohd Yusoh and Sazalinsyah, Razali (2007) Rekabentuk Dan Pembangunan Sistem Penyelenggaraan Mesin Kilang Pemprosesan Makanan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

C

Catherine Foo , Wei Li (2007) The Development Of Malay - English Bilingual Mobile Dictionary For Java Mobile Phone. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chairulsyah, Wasli and Siti Khadijah, Idris and Hanim, Abdul Razak and Amat Amir, Basari (2007) BEKG 2323: Prinsip Kawalan. [Teaching Resource]

Chairulsyah , Wasli and Redzuan , Abdul Manap (2007) BENT 3113: Prinsip Perhubungan. [Teaching Resource]

Chan , Shia Fen (2007) 2D Edutainment For Child's Right Brain Development. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Chang , Nen E (2007) Omni-Directional Hexapod Walking Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Kamariah , Babjan (2007) Develop A 5.8ghz Chebyshev Bandpass Filter Using Microstrip Technologies. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Mohd Khairul, Che Lah (2007) Merekabentuk Litar Pendail Automatik Untuk Sistem Keselamatan Rumah Bersepadu (IHSS). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Munira , Che Razali (2007) Graphic Equalizer And Power Amplifier. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Cheah, Voon Lu (2007) Design And Implementation Of A Warehouse Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Cheng, S.Y. (2007) The Effect of Building Shape Modification on Wind Pressure Differences for Cross-ventilation of a Low-Rise Building. International Journal of Ventilation. pp. 167-176. ISSN 2044-4044

Cheng, S.Y. (2007) Effect of bar sealing parameters on OPP/MCPP heat seal strength. eXPRESS Polymer Letters. pp. 773-779. ISSN 1788618X

Cheng, S.Y. (2007) Heat Sealability of Laminated Films with LLDPE and LDPE as the sealant Materials in Bar Sealing Application. Journal of Applied Polymer Science, 104 (6). pp. 3736-3745. ISSN 1097-4628

Cheok, Yong Seng (2007) Manually Guided Robot With Minimum 5Kg Of Load. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Cheong , Lang Ley (2007) Dance School Management. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chin , Su Fok (2007) Degradation Behavior Of PVC-LDPE Blend. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Chitra , Ramasamy (2007) Online Organ Donation Management System. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Choon Hong, Ng (2007) Multipurpose Display Board. Project Report. UTeM, Melaka. (Submitted)

Clara , Valdez (2007) Alarm Dialler. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Clarenna Jean, C. Lagang (2007) Runway Stage Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Cyril, Patricia Saibul and Shibghatullah, Abdul Samad and Md Salleh, Norhaziah (2007) A Review: Data Mining Brainwave. In: In Proc Seminar on Data Mining & Optimization (DMO 08), 3-4 December 2008, UKM, Bangi, Malaysia..

D

Dahlan , Jalil (2007) Hard Water Treatment System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Dayang Asmah , Raduan (2007) Development Of Computer-Based Training Of Hydraulics And Pneumatics Learning Equipments. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Devaraju, A. and Mohamed , N. and Sulong, M. S. and Wong, C. C. (2007) A Practical Approach to Web Application Development. Venton Publishing Sdn Bhd, Malaysia. ISBN 9833526918

Devaraju, A. and Mohd. Yusoh, Z. I. and Zakaria, M. H. and Techanamurthy, U. (2007) MyLexic:An Assistive Multimedia Courseware for Teaching and Reinforcing Basic Reading Skills among Dyslexic. In: E-Learn 2007 -World Conference on E-Learning in Corporate, Government, Healthcare, & Higher Education, Canada.

Devaraju, A. and Herman, N. S. and Sahib, S. (2007) Building of the Enabled Web-Based GIS Participation System: A Tool to Enhance Community Participation in City Development Plan. In: The 2nd International Conference on Advances in Information Technology (IAIT2007), Thailand.

Devaraju, A. and Hoh, S. and Hartley, M. (2007) A Context Gathering Framework for Context-Aware Mobile Solutions. In: The ACM International Conference on Mobile Technology, Applications and Systems, Singapore.

Devaraju, A. and Nahar, H. and Marimuthu, S. (2007) MEDICT: A Malay<-> English Bilingual Dictionary For Java Mobile Phones. In: IADIS International Conference Wireless Applications and Computing 2007, Portugal.

Devaraju, A. and Techanamurthy, U. and Mohd. Yusoh, Z. I. and Zakaria, M. H. (2007) E-Learning for Disability: Creation, Assessment, and Implementation. In: NTI Journal (Special Issue) on Teaching and Learning. INTI International University College.

Dinesh Kumar , Murugian (2007) Design A Solar Powered Water Pumping System For Typical Household Requirement. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Dzul Fitry, Ismail (2007) Investigation Of Microstrip Parallel Coupled Bandpass Filter For GPS Applications. Project Report. UTeM, Melaka, Malaysia. (Submitted)

E

Effendi, Mohamad (2007) Lean Manufacturing Implementation : A study On The Development Of Key Performance Indicators (KPIs) At An Aerospace Manufacturing Company. Masters thesis, Coventry University.

Elda , Ahmad Jailani (2007) Automatic 'Switch On' System For Car Headlamps. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Eliana , Jaim (2007) Simulation Of Sign Language Alphabet Into Realistic Human Hand. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Elvainey , Panus (2007) Remote Control Via Telephone. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Emilia Shander, Andrew Abe (2007) Control Heating Of Small Forging Using Oxy-Acetylene Flame. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Eng , Sze Yee (2007) The Manufacturing Process Of Robo-Kidz-Toe. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Erasoffinasari , Amirshariffuddin (2007) Solar Powered Plant Watering System. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Ernie , Mat Tokit (2007) DMCT 3133: Termodinamik 2. [Teaching Resource]

Ernyza , Yusuff (2007) Accident Detector Through Cellular Phone (Transmitter). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Esma Niza , Nawi (2007) Pembangunan Aloi Aluminium Terkimpal Dengan Retak Permukaan Sebagai Spesimen Ujian Tanpa Musnah (NDT). Project Report. UTeM, Melaka, Malaysia. (Submitted)

F

Fadzlin , Md Fadzil (2007) Automatic Escalator System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Faiezul, Zainal (2007) Design Of Jig And Fixture For Milling Machine, Case Study - Cylindrical Parts. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fairuz , Osman (2007) Perodua Online Management System (POMS). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fairuzah, Abu Samah (2007) Kajian Kelesuan Ke Atas Logam Dengan Menggunakan Beban Lenturan. Project Report. UTeM, Melaka. (Submitted)

Faizal , Zainol (2007) Gage Capability Study of Thin Film Coating Roughness Measurement Method Using Profilometer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Faizil , Wasbari (2007) Development Of Sepak Takraw Launcher Model. Masters thesis, Coventry University .

Faizul Akmar, Abdul Kadir and Khisbullah, Hudha and Mohd. Zakaria, Mohd. Nasir and Ubaidillah, . (2007) Development of a Magnetically Activated Brake System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Farahidha, Rosli (2007) Malacca E-Pregnancy System (MePS). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Farahiyah , Ghazali (2007) Device Switching Using Pc's Parallel Port. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Farid Arafat, Azidin and Mai Mariam, Mohammad Aminuddin and Yusmarnita, Yusof and Zulkarnain , Zainudin (2007) Developing Power Inverter For Motor Drives System In Laboratory. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fauzatulhamla, Mohd Salleh (2007) Downtime System (DTS) For Press Shop Department. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fauzi , Abdul Wahab (2007) BENT 4173: Sistem Pensuisan Telekomunikasi. [Teaching Resource]

Fauziyah , Salehuddin and Mardiana , Bidin (2007) BENG 3113: Mikropemproses. [Teaching Resource]

Fauziyah , Salehuddin and Niza , Mohd Idris and Zarina , Mohd Noh (2007) BENM 1143: Litar Logik. [Teaching Resource]

Fazlli , Patkar and Ab Aziz , Nur Hakimah (2007) BEKE 1323: Elektronik Analog. [Teaching Resource]

Fini Fatiha, Azman (2007) Monitoring System For Projek Sarjana Muda (MOSYS). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fitrizan, Azizan (2007) Pengasing Buah Epal Dan Oren. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fong , Kheng Fei (2007) Upgrade Asset Management System. Project Report. Melaka, Malaysia, UTeM. (Submitted)

G

Goh, Ong Sing and Ardil, C. and Wong, W. and Fung, C.C. (2007) A black-box approach for response quality evaluation of conversational agent systems. International Journal of Computational Intelligence, 3 (3). pp. 195-203. ISSN 1304-2386

Goh, Ong Sing and Depickere, A. and Fung, C.C. and Wong, K.W. (2007) An analysis of corpus from human computer exchanges using MSN Messenger. In: International MultiConference of Engineers and Computer Scientists 2007 (IMECS 2007), 21-23 March 2007, Hong Kong.

Goh, Ong Sing and Depickere, A. and Fung, C.C. and Wong, K.W. (2007) A multilevel natural language query approach conversational agent systems. IAENG International Journal of Computer Science, 33 (1). pp. 7-13. ISSN 819-656X,33:1

Goh, Ong Sing and Fung, C.C. and Depickere, A. and Wong, K.W. (2007) Domain metric knowledge model for embodied conversation agents. In: 5th International Conference on Research, Innovation &amp; Vision for the Future (RIVF'07), 5-9 March 2007, Hanoi, Vietnam.

Goh, Ong Sing and Fung, C.C. and Depickere, A. and Wong, K.W. (2007) Using Gunnnig-Fog index to assess instant messages readability from ECAs. In: 3rd International Conference on Natural Computation. ICNC 2007., 24-27 Aug. 2007, Haikou.

Goh, Ong Sing and Fung, C.C. and Wong, K.W. (2007) Query based intelligent web interaction with real world knowledge. New Generation Computing, 26 (1). pp. 3-22. ISSN 0288-3635

Goh, Ong Sing and Fung, C.C. and Wong, K.W. and Depickere, A. (2007) Embodied conversational agents for H5N1 pandemic crisis. Journal of Advanced Computational Intelligence and Intelligent Informatics, 11 (3). pp. 282-288. ISSN 1343-0130

Goh , Cheng Yaik (2007) Motor Controller For Solar Energy Optimum Acquisition. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Goh , Lirong (2007) Inventory Management System Using Distributed System Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Gunavathi , Sathappan (2007) Analysis Of Network Performance In Majlis Perbandaran Manjung (MPM). Project Report. Melaka, Malaysia, UTeM. (Submitted)

H

Haadi Rahman, Safian (2007) KTMSAB Annual Meeting Monitoring System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hafizah , Yusop (2007) Microstrip Filter Calculator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hafizzal, Yusoff (2007) Design Analysis And Built A Prototype Of Human Power Submarine For Military. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hairul Anuar, Abdul Hamid (2007) The Design Of A Device To Dismantle Piston Cylinder Liner In A Marine Ship Engine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hairul Anuar , Mohd Yusof (2007) Conceptual And Mechanical Design Of Master Slave (Parent - Child) Robot For Painting Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Haizri, Hassim (2007) Smart Aquarium (Automatic Water Changer). Project Report. UTeM, Melaka. (Submitted)

Halimatun , Hj. Mohd Sharaffudin (2007) Kajian ke atas kesan aliran air kotor mempengaruhi kehilangan geseran dalam paip bulat. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Halina, Abdul Halim (2007) Implementation Of Wireless Network At USM Engineering Campus's Hostel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hamzah, Abu Bakar (2007) Measurement Logging Data Using Bluetooth. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hamzah , Mohd Dom (2007) The Study Of The Aggressive Drilling ( AD ) Process On Aluminum For Automotive Applications. Masters thesis, Universiti Putra Malaysia.

Hanim , Abdul Razak and Mardiana , Bidin (2007) BENG 2223: Teknologi Mikropemproses. [Teaching Resource]

Hanipah, Hussin and Rohana , Omar and Zawiah , Mat and Rabiatul Adawiah , Ab.Aziz (2007) Pembangunan Sosio-Ekonomi Malaysia: Peranan Pemimpin Tempatan. UTeM 2007. (Submitted)

Hanis , Hasnul (2007) Rekabentuk Sistem Pembungkusan Untuk Menghasilkan Produk Nata De Coco. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Harnani , Hanapi (2007) Development Of Satellite Communication Filter Using Microstrip Technologies. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Haron, Nor Zaidi and Siti Aisah , Mat Junos @ Yunus and Abdul Aziz, Amir Shah (2007) A Web Based System For Evaluating Occupational Stress. IEEE. pp. 136-139. ISSN 1536-1225 (Submitted)

Hassan, Ismail (2007) Industrial Seminar On Advanced Plastic Moulding Technologies. [NC Speech] (Submitted)

Hassan, Ismail (2007) Konvensyen Patriotisme Mahasiswa UTeM 2007-2008. [NC Speech] (Submitted)

Hassan, Ismail (2007) Majlis Anugerah Bakti Dan Kegemilangan Pelajar UTeM. [NC Speech] (Submitted)

Hassan, Ismail (2007) Majlis Anugerah Dekan Semester 2 Sesi 2005-2006 Dan Semester 1 Sesi 2006-2007. [NC Speech] (Submitted)

Hassan, Ismail (2007) Majlis Berbuka Puasa dan Sumbangan Hari Raya. [NC Speech] (Submitted)

Hassan, Ismail (2007) Majlis Graduasi Ke-21. [NC Speech] (Submitted)

Hassan, Ismail (2007) Majlis Hari Kualiti Dan Penghargaan Petugas Majlis Konvokesyen Ke-3 UTeM. [NC Speech] (Submitted)

Hassan, Ismail (2007) Majlis Hari Mercu Kokurikulum UTeM. [NC Speech] (Submitted)

Hassan, Ismail (2007) Majlis Konvokesyen Ke-3 UTeM. [NC Speech] (Submitted)

Hassan, Ismail (2007) Majlis Konvokesyen Patriotisme Mahasiswa UTeM 2007. [NC Speech] (Submitted)

Hassan, Ismail (2007) Majlis Minggu Haluan Siswa UTeM Sesi 2007-2008. [NC Speech] (Submitted)

Hassan, Ismail (2007) Majlis Motivasi Bersama Pusat Bahasa Dan Pembangunan Insan. [NC Speech] (Submitted)

Hassan, Ismail (2007) Majlis Pelantikan Dan Akuan Sumpah Pegawai Kehormat Dan Anggota SUKSIS UTeM. [NC Speech] (Submitted)

Hassan, Ismail (2007) Majlis Penutup Dan Persembahan Kebudayaan Minggu Haluan Siswa UTeM Sesi 2007-2008. [NC Speech] (Submitted)

Hassan, Ismail (2007) Majlis Penyampaian Watikah Kepada Majlis Perwakilan Pelajar (MPP) Sesi 2007-2008 Dan Penghargaan Kepada Mantan Perwakilan Pelajar (MPP) Sesi 2006-2007. [NC Speech] (Submitted)

Hassan, Ismail (2007) Majlis Perasmian Bengkel Pelan Strategik Dan Perancangan Tahunan UTeM. [NC Speech] (Submitted)

Hassan, Ismail (2007) Majlis Perasmian Kempen Kesedaran Makna Jelajah IPTA 2007. [NC Speech] (Submitted)

Hassan, Ismail (2007) Majlis Perasmian Pameran Kerjaya UTeM. [NC Speech] (Submitted)

Hassan, Ismail (2007) Majlis Perasmian Pesta Konvokesyen Ke-3 UTeM. [NC Speech] (Submitted)

Hassan, Ismail (2007) Majlis Perasmian Program Bakti Siswa Siri 1 UTeM. [NC Speech] (Submitted)

Hassan, Ismail (2007) Majlis Perasmian Program Bakti Siswa Siri 2 2007. [NC Speech] (Submitted)

Hassan, Ismail (2007) Majlis Perasmian Program Bakti Siswa UTeM Siri 3 2007. [NC Speech] (Submitted)

Hassan, Ismail (2007) Majlis Perasmian Program Pembangunan Sahsiah Staf (PERSIST) FKE, UTeM 2007. [NC Speech] (Submitted)

Hassan, Ismail (2007) Majlis Persaraan Wajib Staf UTeM. [NC Speech] (Submitted)

Hassan, Ismail (2007) Majlis Pertandingan Akhir Debat Kemerdekaan Dan Majlis Penyampaian Hadiah Pertandingan Debat, Pidato Kemerdekaan Dan Kuiz Kemerdekaan 2007 UTeM. [NC Speech] (Submitted)

Hassan, Ismail (2007) Majlis Perutusan Tahun 2007. [NC Speech] (Submitted)

Hassan, Ismail (2007) Majlis Program Spring Festival Sempena Tahun Baru Cina 2007. [NC Speech] (Submitted)

Hassan, Ismail (2007) Majlis Ramah Mesra Pelajar Pasca Siswazah. [NC Speech] (Submitted)

Hassan, Ismail (2007) Pelancaran Kibar Jalur Gemilang Dan Sambutan Bulan Kemerdekaan 2007. [NC Speech] (Submitted)

Hassan, Ismail (2007) Persidangan Antarabangsa Kejuruteraan Dan Komunikasi Teknologi Maklumat (ICEI 2007). [NC Speech] (Submitted)

Hassan, Ismail (2007) Program Perasmian Penutup Program IT Bestari. [NC Speech] (Submitted)

Hassan, Ismail (2007) Program Perkhemahan Perdana Mahasiswa UTeM 2007. [NC Speech] (Submitted)

Hassan, Ismail (2007) Seminar Kenegaraan BTN-UTeM 2007. [NC Speech] (Submitted)

Hassan, Ismail (2007) UPSR Integrated Summer Camp. [NC Speech] (Submitted)

Hassan, Muhammad Zahir (2007) Thermal Deformation Analysis of Automotive Disc Brake Squeal. In: PGR Conference 2007 University of Leeds , September, University of Leeds, United Kingdom. (Submitted)

Hassanul Sazali , Ahmaddin (2007) Development Of CIM Control System Using PLC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hazila , Nayan (2007) Analysis Of The Performance Of A Combustion Chamber Gas Turbine. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Hazura, Haroon and Fauziyah , Salehuddin and Niza, Mohd Idris (2007) Smart Laboratory Inventory Management (Slim) System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hazura , Haroon (2007) DENT 3563: Kejuruteraan Telekomunikasi. [Teaching Resource]

Hazwan Rodzi , Ahmad Sapuan (2007) Automated Storage Retrieval System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hazwani , Hatim (2007) Design Of A RF Wireless Headphones. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Herawan, Safarudin Gazali and Sulaiman, Mohd Yusoff (2007) CARBON ADSORBENT FOR INCREASING THE CAPACITY OF ALTERNATIVE FUELS STORAGE IN VEHICLE. In: 2nd International Engineering Convention 2007 (InTEC 2007), 10 - 14 March 2007, Jeddah, Saudi Arabia.

Herawati , Hardi (2007) Sistem Pensuisan Pengecaman Alunan Berbilang Audio. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hilton, Smith Judan (2007) An Alternative Technique To Map Noise Exposure And Prediction Of Noise Levels In Industri Compliance To Noise Exposure Regulations 1989. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hisham, S. and Edwards, A. (2007) Culture and user-interface design for older users in Malaysia. Gerontechnology: International journal on the fundamental aspects of technology to serve the ageing society, 6 (4). pp. 217-223. ISSN 1569-1101

Hisham, S. and Edwards, A. (2007) Ageing and its Implications for Elderly Web Experience. In: Advances In Universal Web Design and Evaluation. Idea Group Publishing, London, pp. 97-114. ISBN 1-59904097-2

Hoo , Lien Tien (2007) Design On CIM Workstation System - LCD Monitor Back Cover Assembly Station. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hussairi , Borhan (2007) Design And Modeling Of Temperature Control System For House Ventilation System Using MATLAB/SIMULINK. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hussin, B. (2007) DEVELOPMENT OF A STATE PREDICTION MODEL TO AID DECISION MAKING IN CONDITION BASED MAINTENANCE. PhD thesis, University of Salford, Manchester.

hassan, nurmala irdawaty (2007) Erbium doped fibre amplifier impairments in optical burst switched network. Masters thesis, United Kingdom: Swansea University.

I

Idwan Adly, Alias (2007) E Book Marketing System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Imran , Hindustan (2007) DENE 3353: Elektronik Gunaan. [Teaching Resource]

Imran , Mohd Ibrahim and Nur Alisa, Ali (2007) DENT 3463: Komunikasi Digit. [Teaching Resource]

Isa, Halim (2007) BMFP 4573: Undang-Undang Industri & O.S.H.A ( Industrial Laws & O.S.H.A ). [Teaching Resource]

Isa, Halim (2007) Ergonomic Intervention in Malaysian Small and Medium Industries. In: International Ergonomics Conference Humanizing Work and Work Environment, 10 - 12 December 2007, Bhopal, India.

Isa, Halim and Adi , Saptari and Seri Rahayu , Kamat and Wan Hasrulnizzam , Wan Mahmood (2007) Assessment of Workstation Design for Safe Working Posture at Plug Assembly Line. In: International Conference on Engineering and ICT (27-28 November 2007) Organized by Universiti Teknikal Malaysia Melaka., 27-28 November 2007, Hotel Equatorial Melaka.

Isa, Halim (2007) BMFP 4593: Ergonomik Industri (Industrial Ergomomics). [Teaching Resource]

Isa, Halim and Adi , Saptari and Seri Rahayu , Kamat and Rohana, Abdullah and Nor Akramin, Mohamad (2007) Measurement of Thermal Comfort at Working Environment in Manufacturing Industry. In: International Conference on Ergonomics (ICE 2007), 3 - 5 December 2007, Kuala Lumpur.

Isa, Halim and Mohamad Haidir, Maslan (2007) Assessment of Thermal Comfort Measurement in Working Environment of Malaysian Manufacturing Industry. In: Regional Symposium on Engineering Education 2007, 14 February 2007, University of Malaya, Kuala Lumpur.

Isa , Halim (2007) Ergonomics Intervention to Improve Occupational Health of Workers in Malaysian Metal Stamping Industry. In: International Engineering Convention, Federation of Engineering Institutions of Islamic Countries, 10 - 14 March 2007, Jeddah, Saudi Arabia..

Ismail, Abu Shah (2007) BMFR 4143: Reka Bentuk Pembuatan Dan Pemasangan. [Teaching Resource]

Ismail, Hassan (2007) Majlis Perutusan Naib Canselor UTeM 2007. [NC Speech] (Submitted)

Ismail , Yaakob (2007) Pemacu Motor Arus Terus Untuk Beban Minimum 5kg. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Izan Afzan, Salamat (2007) Meander Line Antenna Design For WLAN Application. Project Report. UTeM, Melaka. (Submitted)

J

Ja'afar , Adnan (2007) BEKG 1413: Teknologi Elektrik. [Teaching Resource]

Ja'afar , Adnan (2007) BENT 3153: Elektronik Telekomunikasi. [Teaching Resource]

Jamri , Mohd Saifuzam (2007) Robot Kawalan Jauh Pelbagai Frekuensi "Multi Frequency RC Robot'. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jamunarani, Muthusamy (2007) The Minkowski Fractal Patch Antenna For GPS And ISM Band Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Johal, M. S. and Othman, A. R. and Suaidi, M. K. (2007) Performance Evaluation of Multiple Differential Detection for Third Generation Mobile Communication System. In: 2007 Asia-Pacific Conference on Applied Electromagnetics (APACE), 4-6 December 2007, Melaka.

Johny, Purnomo (2007) BMFG 1812: Pengenalan Kepada Kejuruteraan Pembuatan. [Teaching Resource]

Junaini , Abdull Kadir (2007) Mekanisma Dan Kawalan Menyeberang Bagi Roboclimb. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Juriani , Johor (2007) ICT Portal For Labuan Corporation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Juwita, Mohd Sultan (2007) Multigigabit Wireless Communication. Masters thesis, University of Greenwich.

Juzzairie , Mohd Nor (2007) Kawalan Pergerakan Kamera Menerusi Laman Web. Project Report. UTeM, Melaka, Malaysia. (Submitted)

K

K. Sharmila , Devi (2007) Network Analysis And Design Of Headquaters Of Tractors Malaysia Sdn Bhd. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Kalai Vani , Nanchappa Kavender (2007) Sistem Maklumat Penilaian Tahap Kecekapan Untuk LAN (e-PTK). Project Report. Melaka, Malaysia, UTeM. (Submitted)

Kalaivanan, Kumaran (2007) Pengaturcaraan Paparan Antara Muka Grafikal Untuk Analisis Pengimbangan Statik Dan Dinamik Pada ACI Sesondol Automotif. Project Report. UTeM, Melaka. (Submitted)

Kalaivani, Kanabathy (2007) Licensing Exemption Certification System For Royal Malaysian Custom, Johor. Project Report. UTeM, Melaka. (Submitted)

Kamal Baharin, S. S. (2007) Cartographic Representation on Small Devices. Technical Report. Section GIS Technology.

Kamal Baharin, S. S. (2007) Geo-info to-go. In: The 4th International Symposium on LBS & TeleCartography, 8 - 10 November 2007, Hong Kong.

Kamal Baharin, S. S. (2007) Interaction with Mobile Devices. Technical Report. Section GIS Technology.

Kamal Baharin, S. S. and Suryana, N. (2007) The Importance of Managing Context and Moving Objects Data for Emergency Management System. In: Proceedings of the International Conference on Engineering and ICT (ICEI 2007), 27-28 November 2007, Equatorial Hotel, Melaka, Malaysia.

Kamalrudin, Massila and Stein, Roger D and Sulong, Muhammad Suhaizan and Abdul-Aziz, Azlianor (2007) Theoretical Isotope Generator: An Alternative towards Isotope Pattern Calculator. World Academy of Science, Engineering and Technology, 26. pp. 146-149.

Kamarul Ariffin , Abas (2007) Sistem Pengawasan Kualiti Kuasa Tiga Fasa. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kamarul Iszuwandi , Subri (2007) Merekabentuk Prototaip Dan Membangunkan Lampu Isyarat Pintar Menggunakan PLC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kamarularifin, Kamel (2007) Fabrikasi Dan Ujian Terhadap Model Bot Persiaran. Project Report. UTeM, Melaka. (Submitted)

Kamil Hassan, Ahmad Sukkri (2007) GIS Based Crime Analysis System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kasdirin, Hyreil Anuar and Said, Mohamed Azmi and Bugis, Ismadi and Hanafi, Ainain (2007) BEKC 2443: Mikropemproses. [Teaching Resource]

Kasim, Mohd Shahir and S.A, Faizal and Raja Abdullah, Raja Izamshah and Che Zainal Abidin, Nik Mohd Farid (2007) Hot Alignment Solution Using Spreadsheet Application. In: Conference on Application and Design in Mechanical Engineering, 25-26 Ocktober 2007, Perlis.

Kasim, Raihani (2007) The influence of ingredients towards Malaysian consumer's preferences on facial care moisturiser : a case of Malacca consumer. Masters thesis, Universiti Teknikal Malaysia Melaka.

Keng, Swee Hau (2007) The Significant Of Total Preventive Maintenance Implementation–Case Study. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kevin , Jok Sageng (2007) Quality Study Of Parts Produced By 3D Printer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairil Anwar , Sapeia (2007) Tracking Of Moving Robot By A Moving Robot Using Visual Information. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairizan , Hashim (2007) Development of Materials Handling Techniques for Occupational Health Improvement of Workers in Manufacturing Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairol Anuar, Rakiman (2007) BMFA 3413: Pengenalan Kepada Robot (Introduction To Robotic). [Teaching Resource]

Khairuddin, Osman (2007) Modeling And Controller Design For A Cruise Control System. Masters thesis, UTM.

Khairul Anuar , Juhari (2007) Control Of Robotic Arm Using Visual Basic And Pic Microcontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairul Anwar, Mohamad (2007) Rekabentuk 'Soft Starter' Untuk Motor AC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairulhisyam, Jamel (2007) Development Of Automated Height Meaurement System (Software Development). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairullah , Zulkepli (2007) Merekabentuk Sistem Pengawal Untuk Lampu Isyarat Menggunakan PLC & FLC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kharmizan , Japar (2007) Design Jigs And Fixture For Surface Grinding Long Part. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Koon, Kim Peh (2007) Java Evaluation And Marking System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kuan , Ghee Lin (2007) Road Signboard Game. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kyairul Azmi , Baharin (2007) Analysis Of Renewable Energy Potential In Malaysia. Masters thesis, University Of New South Wales, Australia.

L

Laila , Ahmad (2007) Merekabentuk Pemegang Bekas Serbuk Untuk Mesin Tekan Berputar. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Latifah , Sulong (2007) Force / Torque Sensing Applied To Industrial Robotic Deburring. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Ricky Eik Xiang (2007) mGuide To Melaka. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Yuk Choi and Ahadlin, Mohd Daud and Shamsul Anuar, Shamsudin (2007) Vibration Analysis Of Cavitation In A Centrifugal Pump. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Yuk Choi and Rainah, Ismail (2007) Experimental Study And Simulation Of Noise Exposure In Industry Based On The Factories And Machinery Act (Noise Exposure) Regulations 1989. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee , Choon Seong (2007) Problem Solving Of Foot Switches Processes Using Failure Mode And Effects Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee , Yen Sin (2007) E-Leave System For FTMK. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee , Yea Fei (2007) AD-HOC Monitoring System. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Lenny Adrienna , Adi (2007) Accident Detector Through Cellular Phone (Receiver). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Liew , Pay Jun (2007) A study of EDM machining parameters on SKD 11 tool steel using DOE. Masters thesis, Coventry University.

Lim, Li Kiang Samuel (2007) Blender Design Improvement Through Lucas-Hull DFA Analysis. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Lim , Boo Eik (2007) Two Wheeled Balancing Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim , Peir Jiunn (2007) Micromouse : An Autonomous Maze Solving Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim , Seng Tat (2007) The Design Of A Small Scale Automated Machine For Learning Purpose. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim , Song Kwang (2007) Auto Detection Network Monitoring Software For Single VLAN (AutoD). Project Report. Melaka, Malaysia, UTeM. (Submitted)

Linda , Khoo Mei Sui and Razilah , Abdul Rahim and Rajendraan, Elangsegaran (2007) Communication At The Workplace. Pearson, Petaling Jaya, Selangor. ISBN 9789833927357

Liu , Chiew Lan (2007) The Untold Stories Of Kuala Lumpur- Study Of Camera Shots And Colloquialisms Script. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Lizawina , Mohd Azmi (2007) E-Learning Integrated Living Skills On Electric (Web Based). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lok, Yian Yian and Khoo, Chin Foon and Tee, Boon Tuan (2007) Mathematical Modelling Of Stagnation Point Flow Induced By Accelerating Motion In Micropolar Fluid. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lokman, Abdullah (2007) Automated Colour Sorting Robot For Recycling Application. Masters thesis, Coventry University.

Lydiana, Sorupi (2007) Line Following Mobile Robot Prototype. Project Report. UTeM, Melaka, Malaysia. (Submitted)

M

M.A, Amran and A.R. , Samsudin and R.H., Hambali (2007) A comparison study of flow analysis in 2-plate mould and 3-plate mould using computer software analysis. In: International Conference On Engineering And ICT (ICE 2007), 27-28 December 2007, Equatorial Melaka Hotel, Malaysia. (Submitted)

M.A., Burhanuddin and A.R., Ahmad and M.I., Desa (2007) An Application of Decision Making Grid to Improve Maintenance Strategies in Small and Medium Industries. International IEEE Conference on Industrial Electronics and Applications , 1 (1). pp. 455-460. ISSN 1

M.A., Burhanuddin and A.R., Ahmad and M.I., Desa (2007) MAINTENANCE DECISION MAKING MODEL USING MULTIPLE CRITERIA ANALYSIS FOR SMALL AND MEDIUM INDUSTRIES. Journal of Information Technology, 19 (2). pp. 35-46. ISSN 1

M.A., Burhanuddin and A.R., Ahmad and M.I., Desa (2007) Maintenance Strategies Mapping using Decision Making Criteria Analysis in Small and Medium Industries. Applied Mechanics and Materials, 1 (1). pp. 72-77. ISSN 1660-9336

M.A., Burhanuddin and A.R., Ahmad and M.I., Desa and M.Y., Zeratul (2007) Computerized Maintenance Management System for Food Processing Industries. Reach Conference 2007. pp. 141-147. ISSN 1

M.A., Burhanuddin and Burhanuddin , Mohd Aboobaider and Burhanuddin, M. A. and Zuraida , Abal Abas (2007) MATHEMATICS FOR COMPUTER SCIENCE I. [Teaching Resource]

M.M. , Ahmed and W.L., Soo (2007) Development of communication protocolbased on low voltage distribution automation system. In: International Conference on Engineering and ICT (ICEI 2007), 27-28 November 2007, Hotel Equatorial Melaka. (Submitted)

M.M. , Ahmed and W.L., Soo (2007) Development of human machine interface (HMI) with customized scada system for low voltage disrtribution automation system. In: International Conference On Enginneering and ICT, 27-28 November 2007, Hotel Equarial Melaka. (Submitted)

Maimunah, Ismail (2007) Asset Inventory Information System For Lembaga Akreditasi Negara. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Maisarah , Abu and Zulfiqar , Ali Leghari (2007) BENT 2123: Isyarat Dan Sistem. [Teaching Resource]

Maisarah , Abu and Abd Shukur , Ja'afar (2007) BENT 3213: Sistem Perhubungan. [Teaching Resource]

Mala, Arumogam (2007) Remoteinfo System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Manisah , Abd Hamid (2007) DysMath:Multimedia Courseware For Learning Disability Dyscalculia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mar'emazairy , Omar (2007) The Implementation Of Total Productive Maintenance (TPM) At High Volume Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mardiana, Bidin and Anis Suhaila, Mohd Zain (2007) BENM 4123: Rekabentuk Litar Bersepadu. [Teaching Resource]

Mariyam Jameelah, Bahari (2007) The Effects of Cutting Parameter on Workpiece Surface Layers in the Die Sinking Electrical Discharge Machine (EDM). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Marshall Langi , Tanyit Nasip (2007) Design A Switch Mode Power Supply Using Discontinuous Mode Of Buck-Boost Topology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mas Diela , Asaad (2007) Mari Belajar Jawi. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mashasliza , Ismail (2007) Rekabentuk Sistem Penghantaran Produk Nata De Coco. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Masihah, Abd Halim (2007) Kajian Kesan Lapisan Serat Dan Suhu Pengerasan Ke Atas Komposit Laminat. Project Report. UTeM, Melaka. (Submitted)

Maslan, Zainon (2007) BEKC 3553: PLC & Kawalan Proses. [Teaching Resource]

Maslan , Zainon (2007) BEKC 4883: Sistem Pembuatan Termaju. [Teaching Resource]

Masrul , Masran (2007) Design Switching Mode Power Supply Using Boost Converter Continuous Mode. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Masrullizam , Mat Ibrahim and Nor Zaidi , Haron and Amir Shah , Abdul Aziz (2007) BENM 2123: Teknologi Mikropemproses. [Teaching Resource]

Mastura , Maarof (2007) Flow Investigation Around Immersed Bodies In Subsonic Wind Tunnel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mat Faizal, Omar (2007) Automatic Gate Control. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mawaddah , Muhammad (2007) Implementation Of Recursive Maximum Likelihood (RML) Algorithm In Designing Adaptive Notch Filter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mazdiar , Omar (2007) Windows Mobile Pocket PC Health Care. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mazlan, Esro (2007) BENG 1113: Prinsip Elektrik & Elektronik. [Teaching Resource]

Mazran, Esro (2007) BENG 1113: Prinsip Elektrik Dan Elektronik. [Teaching Resource]

Mazree, Ibrahim (2007) Robotic Simulation For Teaching Purpose Using Fuzzy Logic. Masters thesis, Newcastle University.

Md Hairul Nizam, Talib (2007) BEKE 1233: Peranti Elektronik Dan Sistem. [Teaching Resource]

Md Khambari, M. N. and Sahib, S. and Othman, M. F. I. (2007) Improving IEEE 802.11 to Support Quality of Service in Wireless Networks. In: Regional Conference on Computational Science and Technologies 2007, 29-30 November 2007, Kota Kinabalu, Sabah.

Md Muzzammil , Md Jais (2007) Temperature Measuring Apparatus. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Nor Hayati, Tahir and Hitoshi, Mitomo (2007) Influence of Product Type on Purpose of Using ICT Applications in the Malaysian Research Institutes. Studies in Regional Science, Vol. 3 (No. 1). pp. 41-58. ISSN ISSN 0287-6256

Md Nor Irwan Shah , Md Ab Rahim (2007) Design And Development Of Semi-Auto Point-To-Point Pneumatic Tube System For Manufacturing Applications. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Palil, Md Dan (2007) BMFR 3133: Reka Bentuk Produk (Product Design). [Teaching Resource]

Md Sani, Zamani (2007) Intelligent Rock Vertical Shaft Impact Crusher Local Database System. International Journal of Computer Science and Network Security . pp. 57-62. ISSN 1738-7906

Md Shah, Wahidah and Saaya, Zurina (2007) Practical Approach To Red Hat Linux 9.0: Basic and Intermediate. Penerbit UTEM, Melaka, Malaysia.

Md. Hashim, N. and Asmala, A. and Abdullah, M. (2007) Mapping urban heat island phenomenon: Remote sensing approach. Journal - The Institution of Engineers, Malaysia, 68 (3). pp. 25-30. ISSN 0538-0057

Mellvyne, Sigo (2007) Design For Manufacture And Assembly (DFMA) Evaluation Of Car Audio Front Panel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mirfaizal , Chuchu (2007) Fault Diagnosis And Flow Induced Vibration In Submerged Vertical Pumps In A Power Plant. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Misron, Norhisam and Abdul Shukor , Fairul Azhar and Khamis, Alias and Hizam , Hashim and Mariun , Norman and Jelani, Abdul Razak (2007) Analysis of basic characteristics for linear oscillatory actuator. In: World Engineering Conference 2007, 5- 9 August 2007, Penang, Malaysia.

Misron, Norhisam and Mat Saad, Ezril Hashim and Abdul Shukor, Fairul Azhar and Senan, Mahmud and Wakiwaka, Hiroyuki and Nirei, Masami (2007) Positioning system for sensor less linear DC motor. In: The 6th International Symposium on Linear Drives for Industrial Applications, 16-19 Sept 2007, France.

Misron, Norhisam and Mat Saat, Ezril Hashim and Abdul Shukor , Fairul Azhar and Mahmood, Senan and Wakiwaka, Hiroyuki (2007) Effect of force stages approach for sensor less linear DC motor positioning system. Journal of Industrial Technology, 16 (1). pp. 89-102. ISSN 0128 - 4940

Mohamad, A.Nasoruddin and Ismail, Mahamod and Baharudin Zamani, Zarina (2007) The Performance of Cellular System in Using Bunched Concept. In: Asia-Pacific Conference on Applied Electromagnetics, 2007. APACE 2007, 4 december 2007, Melaka.

Mohamad Aiman, Ismail (2007) Digicity Online Management System(DGCT OMS). Project Report. Universiti Teknikal Malaysia Melaka. (Submitted)

Mohamad Anuar, Zainuddin (2007) Analysis of Surface Integrity of Aero Composite Material in Drilling With High Speed Cutting Tool. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Ariff , Mohd Arshad (2007) Study On DC Motor Control System. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohamad Azam , Manaf (2007) Mini Wireless Weather Station (Part 2) : (Receiving And Processing Weather Data). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Buhori, Fauzi (2007) Kajian Kelesuan Terhadap Logam Menggunakan Bebanan Mampatan. Project Report. UTeM, Melaka. (Submitted)

Mohamad Fadzli , Ahmad Radzi (2007) Suboscillation Method For 3phase Inverter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Faizan, Paiman (2007) Membangunkan Prototaip Mesin Penjualan Automatik Dengan Menggunakan PLC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Faizul , Hussain (2007) Fluid Delivery Subsystem For Oryza Sativa Pesticide Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Faridz, Mohamad Nasir (2007) Merekabentuk Penapis Pasif Bagi Harmonik Dalam Sistem Pengagihan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Firdzaus Syah , Yusuf (2007) Design And Development A Gadget Of Multi Effect For Musical Instrument. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Hafizee , Yaacob (2007) Investigation Of Effectiveness And Cleanliness Of Automated Blow Fill Seal Process In Pharmaceutical Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Hamdan, Yadzi (2007) Merekabentuk Sebuah Kerusi Tulis Yang Sesuai Digunakan Untuk Pengguna Bertangan Kiri Dan Kanan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Harris , Misran (2007) DENG 2113: Mikropemproses. [Teaching Resource]

Mohamad Hasman , Abdul Manas (2007) 8 Bit Microprocessor Design Using VHDL. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Kadim, Suaidi (2007) BENT 4123: Optoelektrik Dan Komunikasi Optik. [Teaching Resource]

Mohamad Nizam, Ayof (2007) DACS 1263: Fizik Asas. [Teaching Resource]

Mohamad Razif , Baharudin (2007) Analysis The Performance Evaluation Between Oil Based Coolant And Environmentally Based Coolant On Cutting Surface In Turning Operation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Ridzuan, Jamli (2007) The Effect Of Mig Welding Parameters On Aluminium Alloy Al6063-T6. Masters thesis, Coventry University.

Mohamad Ridzwan, Ishak (2007) A Comparison Of Mechanical Properties Between Kenaf Core Fiber And Kenaf Bast Fiber Reinforced Polyester Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Shameel , Abdullah (2007) Merekabentuk Sistem Panel Solar Bergerak. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Mohamad Syahrul Aswadi , Mohamad (2007) Pembangunan Aloi Ferus Terkimpal Dengan Retak Permukaan Sebagai Spesimen Ujian Tanpa Musnah. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Wahyee , Hamidon (2007) Design And Fabricate A High Torque Magneto-Reological Fluid Clutch. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Zafarid , Jaridi (2007) Kajian Tentang Kesan Perubahan Beban Ke Atas Enjin Terhadap Nisbah Udara-Bahan Api Dan Prestasi Enjin Pembakaran Dalam. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Mohamad Zoinol Abidin, Abd Aziz (2007) Design Of A Beamforming Network Using Butler Matrix. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Zoinol Abidin , Abd Aziz (2007) BENT 4153: Frekuensi Radio & Teknik Gelombang Mikro. [Teaching Resource]

Mohamad Zoinol Abidin , Abd Aziz (2007) BENT 4143: Kejuruteraan Antenna. [Teaching Resource]

Mohamed , N. and Ahmad, I. and Zakaria, M. H. and Abdullah, M. H. L. and Azman, F. N. and M. Sah, S. B. and Romli, R. and Bakar, N. and Shahbodin, F. (2007) Sistem Multimedia. Venton Publishing (M) Sdn Bhd, Malaysia. ISBN 978-983-3526-95-6

Mohamed Azmi, Said and Marizan, Sulaiman and Muhammad Herman , Jamaluddin (2007) Design Of Vision Guided Manipulator For Optimal Dynamic Performance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamed Khairulazim, Mohamed (2007) Database Development For Engineering Laboratory Management. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamed Muaz , Mohamed (2007) Animated Comic- The Legend Of Hang Tuah Using Frame By Frame Animation Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamed Naufal , Omar (2007) Pick And Place Robotic Arm Controlled By Computer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Akashah , Noordin (2007) Computer Aided Design And Facrication Of Microwave Balanced Mixed. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Faisol, Ghazali (2007) Pengesan Objek Logam. Project Report. UTeM, Melaka. (Submitted)

Mohammad Fauzi , Awang (2007) Merekabentuk Sistem Pengawal Untuk Lif Menggunakan PLC (Programable Controller) & FLC (Fuzzy Logic Controller). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Fuad, Jamingan (2007) Design 3 Finger Gripper For AGV. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Iskandar, Seni (2007) The Study of Mechanical Properties and Microstructure of Thermal-Curing Process on Natural Fiber (Kenaf) Reinforced Thermoset Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Kamil, Sued (2007) Dimensional Inspection of Mesoscale Components Using Laser Scanning and CCD Camera. Masters thesis, The University of Manchester.

Mohammad Najib, Abu Mansor (2007) Robot Humanoid CS8 (Bahu Fleksibel). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Rhiyaad, Kamshah (2007) CSB Humanoid Robot (Leg II). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Rozainee , Othman (2007) FMS 200 Output Count Display. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Mohammed Azim , Ahmad (2007) Modul E-Pembelajaran Bagi Pembelajaran Aliran Beban. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Adil , Mat Noor (2007) The Impact Of Embedded Generation On Existing Electrical Distribution Network Network. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Adlisyah , Mohd Ramli (2007) Fingerprint-Based Attendance Monitoring System. Project Report. UTeM, Melaka. (Submitted)

Mohd Afzanizam, Mohd Rosli (2007) A Study Of Catalytic Converter Of Diesel Oxidation Catalyst Using CFD Fluent. Masters thesis, Coventry University.

Mohd Aizat , Ahmad Tarmizi (2007) Simulation And Study On Puma Robot Configuration With Workspace. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Akmal , Ab Halim (2007) Pengesanan Perambatan Retak Dalam Aluminium Tempatan Yang Dilindapkejut Dengan Menggunakan Teknik Pengesanan Visual. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Amin Ridhuan , Azmi (2007) Perolakan Haba Semulajadi Yang Berlaku Dalam Satu Kotak Tertutup Dan Mempunyai Sumber Haba Berdiskret Di Dalamnya. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Amran , Mohd Zawawi (2007) Paparan Elektronik Menggunakan Mikropengawal. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ashraaf , Amir (2007) Bluetooth Mobile Messenger. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Asyadi 'Azam, Mohd Abid (2007) BMFB 2213: Bahan kejuruteraan (Engineering Materials). [Teaching Resource]

Mohd Asyadi', Mohd Abid (2007) BMFB 4213: Kejuruteraan Kakisan (Corrosion Engineering). [Teaching Resource]

Mohd Azam , Roslan (2007) Dynamic Characterization Of Two Dimensional Flexible Plate Structure Using Neural Network. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azhar, Abdul Hamid (2007) Pembinaan Perisian Audit Bagi Sistem Pencahayaan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azizi , Jali (2007) Design For Manufacture And Assembly Of Air Freshener Dispenser. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azizie , Muhammed Pauzi (2007) Warning System For Barrier Distance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azli , Mohamad @ Ismail (2007) Fish Robot-Prototype. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azman , Mahmood (2007) Rekabentuk Struktur Mekanikal Mesin Pengikis Untuk Nata De Coco. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azrul Hisham , Abdul Kadir (2007) Analysis Of Surface Integrity Of Honeycombed Aero Composite Material In Drilling With HSS Cutting Tool. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azwan , Arbaii (2007) Rekabentuk Dan Analisis Lengan Kawalan Sistem Gantungan Kereta Lumba Formula Universiti. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Dzul Fahmi, Mohd Zawawi (2007) Development Of RFID Database Handling System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Edeerozey, Abd Manaf (2007) BMFB 3242: Bahan Plastik @ Logam (Plastic Materials & Metals). [Teaching Resource]

Mohd Eshra Helmy , Abdul Rahim (2007) A Real Time Barcode Reader For Laboratory Attendance (Hardware). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fadzil, Md Arap (2007) Flood Alert System via SMS (FASvSMA). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fadzli, Mustapha (2007) Investigation Of Mechanical Properties Of Parts Produced Using 3D Printing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fairuz, Dimin (2007) BMFB 3223: Metalurgi Mekanikal (Mechanical Mettalurgy. [Teaching Resource]

Mohd Fairuz, Hamzah (2007) Wireless Ad-Hoc Routing System (WARS). Project Report. UTeM, Melaka. (Submitted)

Mohd Fairuz , Roslan (2007) Merekabentuk Dan Membangunkan Tangki LPG Dilengkapi Dengan Alat Pemanas Untuk Kenderaan. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Mohd Fairuz Nizam , Ibrahim (2007) The Development Of Modular Product Design : Foldable Chair. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Faiz, Abd Rahim (2007) Design, Development, And Fabrication Of Tyre Lug Wrench. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Faiz , Hassan (2007) Speed Control Of CESB Conveyer Belt With PLC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Faizal , Basarudin (2007) Penggerak Bendera Dengan Kawalan Jauh ('Flag Raising Remote Control'). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Faizal , Razali (2007) Real Time Clock Using PIC Micro. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Faizul, Abdul Rashid (2007) Redesign Of A Manual Wheelchair Through Concurrent Engineering Tools. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Faizul , Rozali (2007) Prismatic Lifter Robot By Using Programmable Logic Control (PLC). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Faizul Shazrin , Shukor (2007) The Hopping Robot With One Leg. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fakzan Akhmar , Omar (2007) Electronic Mechanical Design System (E-Mech Sys) For Consultancy Services Fire Fighting Approach. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Mohd Farid , Abu Bakar (2007) Data Logger For Vertical Tube Furnace. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Farred Akma , Awang (2007) Robot Humanoid CS-8 (Pengolah Bahagian 1). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fathdzil , Mustapha Ali (2007) Network Based Home Surveillance System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fathi Nadwi , Mohd Fauzi (2007) Pengecas Solar Untuk Telefon Bimbit. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fazli, Razali (2007) Development Of An Automated Door Locked (Smart Keyless Entry). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fazry , Abdul Aziz (2007) Pembangunan Sistem Hidraulik Air Bertekanan Rendah Menggunakan Pam Empar. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Mohd Firdaus, Aluwe (2007) Two Robots Pushing A Beam (Movement And Communication). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Firdaus, Ab Wahab (2007) Video Surveillance System. Project Report. UTeM, Melaka. (Submitted)

Mohd Firdaus , Hashim (2007) Design And Build New Cold Press Mini Machine By Using PLC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Firdaus , Mansor (2007) Kawalan Motor Sesentuh. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Firdaus , Rameli (2007) Unit Pacuan Hidraulik Boleh Ubah Kelajuan. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Mohd Hafeez , Nazri (2007) Pick And Place Robotic Arm With Training Kit (Software). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Haffizzi , Md Idris (2007) Design A Casing For Air Pressure Plug Rapid Prototype. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafiq Iquan , Mohd Yusoff (2007) An Improvement Of Drinking Water Container Design Focusing On Structural Aspect. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafiz , Mohd Zailan (2007) Design Of Electrical Hardware And Controller For Nata De Coco Scrapping Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafiz , Zainuddin (2007) Computer Aided Education On Special Transformer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafizan , Che Halim (2007) Design Of Step Impedance Hairpin Resonator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafizul , Mohamed (2007) A Study And Designing Gps Antenna Using Microstrip Technologies. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Haikal , Mohd Baharudin (2007) Student Examination Attendance System Via Radio-Frequency Identification (RFID) Simulator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hairudin , Jaffri (2007) Infrared Distance/Height Measurement. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hairul Anuar, Jasmi (2007) Kajian Kesan Hentaman Terhadap Komposit. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hairul Anuar , Mohd Khir (2007) Robot Pengikut Isyarat Infra-Merah. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hanif, Mohd Jamil (2007) Mobile Tips Advertisement For Motorcycle Tyre Safety On 2D Animation (M-TIPS). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hanif, Mohd Noor (2007) PC Based Oscilloscopes By Using PIC (sofware). Project Report. UTeM, Melaka. (Submitted)

Mohd Hasbullah, Mohd Teridi (2007) Optimization And Utilization Of Condensing Air Waste For Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hazihan , Mohamad (2007) Simple Friction Welding Machine. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Hazlie , Hassan (2007) Anti Smoke Campaign Control By PLC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Helmi, Suid (2007) Pick And Place System Using Controlled Robotic Arm. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Helmi , Hamidin (2007) Sistem Penderia Partikel Habuk. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Helmy , Hassan (2007) Redesign A Baby Pushchair Through Concurrent Engineering Tools. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hendra, Hairi and Md Hairul Nizam, Talib and Md Nazri, Othman and Rosli, Omar (2007) Analisis Penatahan Dan Penyelarasan Peganti Aruslebih Dan Rosakbumi Pada Sistem Voltan Rendah. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hezerulnizam , Harun (2007) To Design A Cam-Operate Vertical Windmill For Electric Power Generation. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Mohd Hilmy, Mohd Yusof (2007) Surface Integrity Of AISI 1045 Steel When Machined With TiC Cutting Tool. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hisham , Nordin (2007) Development Of Automatic Orientation Device For Multiple Objects. Masters thesis, Coventry University .

Mohd Hishamuddin , Daud (2007) Aliran Bendalir Sekeliling Hidrofoil Dengan Menggunakan Kaedah Simulasi. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hosni , Mamat@Ariffin (2007) Green House Solar Powered For Plant Watering System. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Mohd Idain Fahmy, Rosley (2007) Kajian Terhadap Rekabentuk Raifal Tempur Baru Untuk Angkatan Tentera Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ikhwan, Abdul Rahim (2007) Design Automation Of Engineering Component Using CAD 2D Software. Project Report. UTeM, Melaka. (Submitted)

Mohd Ikhwan Firdaus , Azmi (2007) Vision Guide For Car Radio Control. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ikmil Fadzrizan, Mohd Hanif (2007) Robot Humanoid CS8 (Leher Fleksibel). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ikram , Kamarulzaman (2007) Hardware Development Of Barcode Scanner. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Iskandar , Abu Yamin (2007) Modified Suboscillation Method For Inverter With Third Harmonic Injection. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ismail , Othman (2007) Pengotimuman Tenaga Secara Automatik Menggunakan Aplikasi PIC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Izwan , Zaini (2007) Design For Manufacturing And Asembly (DFMA) Of Industry Product. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Mohd Jefri , Amir (2007) Assessment Of Fuse Deposition Modeling (FDM) Machine And 3D Modeling Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Khairi , Mamat (2007) Pengesanan Retak Lesu Dalam Aloi Tempatan Dengan Menggunakan Teknik Pemeriksaan Visual. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Khairil Ashraf, Mohd Aziz (2007) Kapasitor Sebagai Peranti Simpanan Tenaga. Project Report. UTeM, Melaka. (Submitted)

Mohd Khairrul Amry , Romli (2007) Integrated Design - Grass Cutter And Collector Machine. Project Report. UTeM, Melaka. (Submitted)

Mohd Khairul Adly , Adnan (2007) Tunnel Inspection Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Khairul Hisam , Ab Ghani (2007) Penyerap Gelombang Mikro (Piramid). Project Report. Melaka, Malaysia, UTeM. (Submitted)

Mohd Khairul Najmi, Uyup (2007) Design And Development Of Boat Winch Effect On Machinery. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Khairul Zul-Hilmi , Yusoff (2007) Aplikasi Penggunaan Pengubah Zigzag Dalam Mengurangkan Harmonik Gandaan Tiga Dalam Sistem Agihan Elektrik 3 Fasa 4 Wayar. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Mazli, Mohd Ismail (2007) Merekabentuk Gandaan Kamiran Tidak Tetap Menggunakan Logik Fuzzi Sebagai Kawalan Penjanaan Automatik (AGC) Pada Model Turbin Gas. Project Report. UTeM, Melaka. (Submitted)

Mohd Mazlisyam , Salleh (2007) Inovasi Pengiklanan Terkini. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Murshid , Saad (2007) Rekabentuk Dan Analisis Bicu Lantai Untuk Kenderaan Ringan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Najib , Ab Manan (2007) Analysis Of A Device That Inflates The Inflatable Items. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Mohd Najmi , Aziz (2007) Designing User Device And Sensor Circuit For Intergrated Home Security System(IHSS). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nashmal , Mohmad Rozee (2007) Mereka Dan Membina Pintu Pagar Keretapi Automatik Dengan Menggunakan PLC : (Design And Implementation Of Real-Time Automatic Controlled Gate For Train Monitoring System Using PLC). Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Nasir, Ishak (2007) Mekanisma Dan Kawalan Penyelamat Bagi Roboclimb. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nasir , Omar (2007) Fabrikasi Dan Pengiraan Manual Untuk Sebuah Generator Elektrik Janaan Ombak. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nazri, Ismail (2007) Design, Analysis And Fabricate Small UAV Prototype For Defence Sector. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nizam , Abu Seman (2007) Design & Implementation Of Pick & Place And Storage Systems Application Using Fanuc Robot & Electro-Pneumatic Systems. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nor'Aswadi, Mohammad (2007) Design Of Microcode Memory Built-In Self Test. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nurul Hisham , Che Aman (2007) Netbot Watcher. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Rahim, Mahyuddin (2007) Secure Data Transfer Using Wireless Infrared Communication. Project Report. UTeM, Melaka. (Submitted)

Mohd Ramzi , Abdul Hamid (2007) Merekabentuk Pengawal Untuk Mekanisma Sistem Alat Pengangkat Menggunakan PLC Dan FLC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ridzuan , Mohd Arip (2007) Kinematik Hadapan Bagi Robot Kecil Berjalan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ridzuan , Mustapha (2007) DOE Based Modeling In Machining Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Rizal, Salleh (2007) BMFS 2513: Proses Pembuatan I (Manufacturing Process I). [Teaching Resource]

Mohd Rizal, Salleh (2007) BMFS 2513: Proses Pembuatan I (Manufacturing Process I). [Teaching Resource]

Mohd Rodzi , Hasan (2007) Redesign & Enhancement Of Multifunction Caterpillar. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Rustham, Andul Rahman (2007) Merekabentuk Bekalan Kuasa Ragam Pensuisan Menggunakan Kaedah Penukar Buck Sebagai Mod Pensuisan. Project Report. UTeM, Melaka. (Submitted)

Mohd Sa'ari, Mohamad Isa and Mohd Shahril Izuan, Mohd Zin and Azmi , Awang Md Isa (2007) Content Based Personal Communicator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Sa'ari , Mohamad Isa (2007) DENE 2143: Isyarat Dan Sistem. [Teaching Resource]

Mohd Sabri, Ramli (2007) Mesin Pemain Gamelan. Project Report. UTeM, Melaka. (Submitted)

Mohd Safuwan, Masiron (2007) Three Phase DC AC Inverter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Saiful , Md Sukardi (2007) Merekabentuk Dan Memfabrikasi Pelantar Pembersihan Komponen Berat. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Saifulddin, Puteh (2007) Energy Efficiency In Ofice Building-Practical Case Study. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Saleh, Mohamed (2007) Improvement Of Ride Quality Of Passenger Vehicle Using The Semi-Active Suspension System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Saleh , Mahmod (2007) Membangunkan Glob Plasma Menggunakan Pemacu 'Flyback'. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Salehuddin , Paiman (2007) Analisis Prestasi Minyak Pelincir Terhadap Enjin Petrol Empat Lejang 100CC Satu Silinder. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Mohd Shafihan , Mohd Said (2007) Carbon Dioxide Measurement Via Infrared Absorption With Display. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Shafik Wazan, Mohd Nasir (2007) Analisis Sifat-Sifat Motor Aruhan Tiga Fasa. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Shafiz , Said (2007) Design And Implementation Of Real Time Four Junction Traffic Light Monitoring System Using PLC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Shahir, Kasim (2007) BMFR 4113: CAD/CAM. [Teaching Resource]

Mohd Shahir, Kasim (2007) BMFR 4113: CAD/CAM. [Teaching Resource]

Mohd Shahnizar, Marzuki (2007) Decision Support System For Universiti Teknikal Malaysia Melaka Project Tender. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Shahril , Ali (2007) Investigation Of Microstrip Sierpinski-Gasket Fractal Antenna For GPS Applications. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Shahril Izuan, Mohd Zin and Ja'afar, Adnan and Azmi, Awang Md Isa (2007) Portable Fingerprint-Based Attendance Recording & Monitoring System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Shahril Izuan , Mohd Zin (2007) BENG 2223: Teknologi Mikropemproses. [Teaching Resource]

Mohd Shahril Izuan , Mohd Zin (2007) BENT 3173: Komunikasi Data Dan Rangkaian. [Teaching Resource]

Mohd Shaifulredza , Zainol (2007) Development Of Ping-Pong Ball Collector Robot (Hardware). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Shakir , Md Saat (2007) BENE 4153: Instrumentasi Proses. [Teaching Resource]

Mohd Shamir, Azman (2007) Two Robots Pushing A Beam (Distance And Sensors). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Sufian , Musa (2007) Microprocessor Based Thermometer Device. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Syafieq , Mohd Saufe (2007) Investigate The Influence Of Cutting Fluids Direction To The Tool Life. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Syafiq, Abdul Halim (2007) Humanoid Robotic Development. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Syahrizal , Basri (2007) Rekabentuk Dan Analisis Sistem Stering Bagi Kereta Lumba Formula. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Syaiful Nizar , Hassin (2007) Mini Wireless Weather Station (Part 1) : (Measurement And Transmission Of Weather Data). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Syaiful Redzwan, Mohd Shah (2007) Design, Fabricate And Testing Of Feed Network For 2X2 Array Antenna. Project Report. UTeM, Melaka. (Submitted)

Mohd Syazwan , Mohd Azli (2007) Microweb And Coin Slot For Snack Vending Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Syazwan , Solah (2007) Kajian Pembangunan Komponen LPG Untuk Kenderaan. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Mohd Taib, Dora and Sharimllah Devi, Ramachandran and Mohd Shamsuri, Md Saad and Nik Rahila , Wan Ibrahim and Anisah, Kasim (2007) A Study On The Profile Of International Graduate Students According To The Country Of Origin, The Choice Of Institution And The Modes Of Studies. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Tajuddin , Haron (2007) The Development Of Modular Product Design : Book Shelves. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Tarmizi , Zulkapli (2007) Pick And Place Robotic Arm With Training Kit. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Taufik , Talib (2007) The Design And Development Of Boat Winch : Effect On Mountings. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Warikh, Abd Rashid (2007) Pengoptimunan Proses Pengkalsinan Dan Pensinteran Untuk Menghasilkan Kalsium Kuprum Mangan Oksida (CaCu3Mn4012)Melalui Kaedah Tindakbalas Keadaan Pepejal. Masters thesis, Universiti Malaya.

Mohd Yasser , A. Rahim (2007) Mekanisma Dan Kawalan Pencengkam Bagi Roboclimb. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Yusoff , Salleh (2007) Finite Difference Simulation Of A Flexible Rectangular Plate Structure. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Yusri, Abdul Halim (2007) Kajian Keberkesanan Penggunaan Alat Penstabilan Tenaga. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Yusry , Mahamad Ghaus (2007) The Energy Absorption Of Circular Multirings Subjected To Transverse Loading. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zafirdan , Mat Amin (2007) Design And Fabricate Vise Using CAD-CAM System. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Mohd Zahari , Abd Wahab (2007) Optical Reception Of Voice Signal Using Square Wave Frequency Modulation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zaid , Akop (2007) An Investigation Of Disc Brake Rotor By Finite Element Analysis (FEA). Masters thesis, Coventry University.

Mohd Zakaria , Mamat (2007) Pengawalan Kelajuan Kipas Secara Automatik. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zaki Hosni, Bakri (2007) Development Of Modular Virtual Instrument. Project Report. UTeM, Melaka. (Submitted)

Mohd Zamri , Gzali (2007) Influence Of Drill Geometry On Burr Formation Characterization. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zerty Iqram, Khidzer (2007) Washing Machine Simulator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zuhri , Mohamed Yusoff (2007) A Case Study Of Rapid Prototyping Technologies. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zulhatfi, Ab Aziz (2007) Reconstructed Of The Department Website By Implementing Web Design Guidelines. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zulhelmi , Halim (2007) The Temperature Control System Using PLC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zurul Kamal , Salim (2007) Pengukuran Sudut Fasa Menggunakan Teknik Anjakan Fasa. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd. Amran, Md. Ali (2007) BMFS 3343: Alat Pengeluaran (Production Tooling). [Teaching Resource]

Mohd. Hadzley, Abu Bakar (2007) BMFB 4223: Metalurgi Gunaan (Applied Metallurgy). [Teaching Resource]

Mohd. Hadzley, Abu Bakar (2007) BMFS 4343: Teknologi Alat Pemotongan (Cutting Tools Technology). [Teaching Resource]

Mohd. Sukuri , Abd. Jaafar (2007) Ergonomic Workstation Design: A Study On Electric Arc Welding Operation In UTeM Workshop. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muda, A. K. and Shamsuddin, S. M. and Darus, M. (2007) Embedded Scale United Moment Invariant for Identification of Handwriting Individuality. In: International Conference on Computational Science and Its Applications - ICCSA 2007, Kuala Lumpur, Malaysia.

Muda, A. K. and Shamsuddin, S. M. and Darus, M. (2007) Invarianceness of Higher Order United Scaled-Invariants. International Journal of Advances in Computer Science and Engineering. ISSN 0973-6999

Muhamad Arfauz, A. Rahman (2007) BMFA 3423: Reka Bentuk Sistem Kawalan (Control System Design). [Teaching Resource]

Muhamad Ashadi , Abdul Rahman (2007) Autonomous Mobile Robot Navigating Towards A Preset Target : Hardware And Control Of Mobile Robot Locomotion. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Edi , Basri (2007) Car Lamp Failure Detector And Warning System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Fahmi , Abu Bakar (2007) MCS-51 Monitor Program. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Muhamad Hafiszan, Kamarul Zaman (2007) Robot Humanoid CS8 (Tangan Bahagian 2). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Kamal , Yaakob (2007) Pengingat Masa Perubatan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Khalil, Yeop Sabri @ Ariffin (2007) Smart Attendance System By Using RFID (Software). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Masri , Abu Bakar (2007) Fabrikasi Dan Ujian Terhadap Pengayuh Gelombang Ombak Secara Automatik. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Nor Hafiz, Moktarudin (2007) Application Of LDR Sensor On Line Follower Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Nur Arsh, Mohamad Basir (2007) Design Of An Aid To Assist Handicap/Old People To Toilet/ Shower. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Syafiq , Zulkefly (2007) Alat Latih Penukar Jenis Buck. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Afiq , Zulkifli (2007) Design For Robot Welding Rotation Jig With Workspace. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Aizuddin , Che Soh (2007) Design 8 Bit CPU By Implemented On FPGA. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Ali, Muhiddin (2007) Autovolume And Handclap Channel Scan FM Radio With Auxiliary Audio Input. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Ashraf, Shukor (2007) Analysis Of Earth Fault Relay. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Azizul, Abdul Aziz (2007) Digital Personal Computer Oscilloscope. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Faiz, Abdul Kadir (2007) Investigation Of Sierpinski Carpet Fractal Antenna. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Faizal , Ahmad Paruti (2007) Design And Implementation Of A Serial-Based Data Acquisition System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Fakran, Nor Rijam (2007) Model Pembelajaran Otak Kawalan Komputer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Firdaouse , Khalib (2007) Design And Implementation Of Colour Detection Mobile Robot Using Microcontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Firdaus , Adnan (2007) Control Design For Ball Sorter Machine Using Grafcet (Software Programming). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Firdaus , Mustafa (2007) A Study And Development On Microwave Absorber Using Agriculture Wastematerial. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Muhammad Firdaus , Jamal (2007) The Study Of Multi-Rectangular Ring Under Quasi-Static Loading. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Muhammad Hafidz Fazli , Md Fauadi (2007) BMFA 4463: Pembuatan Berbantu Komputer (Computer Integrated Manufacturing). [Teaching Resource]

Muhammad Hafizan , Yosri (2007) Mobility Sub Sytem For Robotic Oryza Sativa Pesticide Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Hafizzullah , Zakaria (2007) The Development Of 5.8 GHZ Front End Low Noise Amplifier. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Hanafi , Noorham (2007) 10W Synchronous Buck Converter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Hanafi , Chee Pi (2007) Design Three Dimensionally Adustable Head Rest (TDAHR) For Car Seats. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Hasnan , Abd Ghani (2007) Efficiency Energy Storage, From Kinetic Energy To Electric Potential Energy. Project Report. UTeM, Melaka. (Submitted)

Muhammad Hazmin, Wardi (2007) Mobile Money Edutaintment : Kids Cashier. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Ihsanuddin, Hai Hom (2007) Robot Humanoid CS8 (Pinggang Fleksibel). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Jabir , Suleiman (2007) Investigation Of Tool Wear Characteristics For Numerical Control Sculpture (NCS) Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Khalis , Abdul Aziz (2007) Soccer Robot : Score Board System. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Muhammad Mokhzaini, Azizan (2007) Effect of THD towards temperature properties of power conductor under harmonic influence. In: International Conference on Engineering and ICT (ICEI 2007), 27 -28 Nov 2007, Hotel Equatorial Melaka. (Submitted)

Muhammad Muizz , Mohd Nawawi (2007) Smart Greenhouse Using PIC16F877A Microcontrollers. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Muhammad Najmuddin , Ishak (2007) Sistem Kawalan Ramp Menggunakan PLC. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Muhammad Nasir Asadullah , Osman (2007) Autonomous Mobile Robot Navigating Towards A Preset Target : Beacon And Robot Navigation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Nazri, Sayuti (2007) Knowledge Based Expert System In Machining. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Nizam, Kamarudin (2007) Self-Tuning P1 Control For A Torque And Speed Of A DC Motor Using Fuzzy Algorithm. Masters thesis, Newcastle University.

Muhammad Noor , Idris (2007) Prototaip Untuk Memperbaharui Sumber Tenaga Solar : 5-15 V (A.T) Kepada 120-230 V (A.U) 50-60 Hz Menggunakan Penukar (Inverter). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Nuruddin , Yahya (2007) State Space Approach For Controlling 1-Dof Vehicle Active Suspension System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Rafie', Che Rose (2007) Beamforming Network Design By Using Butler Matrix. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Subri , Zaid (2007) Sistem Kawalan Lampu Isyarat Mudah Alih. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Syafik, Jumali (2007) DMFD 3413: Kuasa Bendalir (Fluid Power). [Teaching Resource]

Muhammad Syahrir , Johal and Mohamad Kadim , Suaidi and Abdul Rani , Othman and Redzuan, Abdul Manap and Hairulisam, Md Dom (2007) Design And Development Of Multiple Differential Transceiver At 2.0 GHz For Third Generation Mobile Communication System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Syahrir , Johal (2007) BENT 4113: Sistem Perhubungan Digit. [Teaching Resource]

Muhammad Syahrir , Johal and A.Nasoruddin , Mohamad (2007) BENG 2413: Prinsip Perhubungan. [Teaching Resource]

Muhammad Syamim , Rosli (2007) Merekabentuk Sebuah Sistem Unit Kuasa Hidraulik Mudah Alih Menggunakan Pam Bilah Berubah Boleh Laras Tekanan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Taufeq , Omar (2007) FTMK Industrial Training System. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Muhammad Yaakub, Ramli (2007) Enchancing Eko-Tech07 System With Security Data Element And Connection Via Hand Phone (Eko-Tech07. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Zhafran, Mohaiyiddin (2007) Development of Material Handling System in Laser Cutting Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhd Akmal, Shamsudin (2007) Automatic Blocking Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhd Amran, Abdullah (2007) Design And Development Of Car Gear Knob For Mass Customization. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhd Khairul Ikhwan, Muhd Atan (2007) Process Design For Mass Manufacturing Of Powder Formed Solid Fuel From Dried Fibrous Garden Leaves. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhd Lokhman, Che Ab Rahman (2007) Membangunkan Sistem Pengepam Air Untuk Mini Dandang Yang Menggunakan Kayu Sebagai Bahan Bakar. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhd Ridhwan , Said (2007) Development Of Automated Height Measurement System. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Muhd Ridzuan , Mansor (2007) Finite Element Analysis (FEA) Of An Automotive Clutch Disc Component. Masters thesis, Coventry University.

Mulyaningrum, . and Edna, Buyong and Juhaini, Jabar (2007) Appropriate Technology For Strengthening The Role Of Small And Mirco-Enterprise (SME): Case Study On Food Processing Industries In Malacca State. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Munaliza , Musa (2007) Dancing Robot (Software). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Munirah , Othman (2007) Study On Carburizing And The Kinetics Of Low Alloy Tool Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muslim , Wan Harun (2007) Motion Card Simulation For Master Slave Robot For Painting Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mustafa, Zaleha (2007) BMFB 4233: Komposit Dan Bahan Termaju (Composite & Advanced Materials). [Teaching Resource]

Muzafar, Selamad (2007) Rekabentuk PLC Berdasarkan Sistem Kawalan Proses. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muzalifah , Mohd Said and Mohd Riduan , Ahmad and Abdul Rani , Othman (2007) DENT 2543: Prinsip Perhubungan. [Teaching Resource]

Muzamzami, Musa (2007) Pengesan Kebocoran Gas. Project Report. UTeM, Melaka. (Submitted)

mod dom, hamzah (2007) The study of the aggressive drilling (AD) process on aluminum for automotive applications. Masters thesis, Universiti Putra Malaysia .

N

Najwa , Khalid (2007) Programming Of Vision System For Computer Integrated Manufacturing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nanna Suryana, Herman (2007) Conceptual development of resources discovery in the proposed hybrid P2P video streaming. In: lnternational Conference On Engineering And lCT (ICEl 2007), Nov.-Dec. 2007, Melaka, Malaysia. (Submitted)

Nanna Suryana, Herman (2007) The application of neural network data mining algorithm into mixed pixel classification in geographic information system environment. In: Paper Presented at the International Conference on Engineering and ICT (ICEI 2007) , 27 -28 Nov 2007, Hotel Equatorial Melaka.. (Submitted)

Napisah , Harun (2007) School Student Academic Management System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nasrul , Harun (2007) Evaluation Of The Capability Of The CFX Computational Fluid Dynamic In The Prediction Of KOI Pond Flow. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nawai , Langar (2007) Wall Follower Mobile Robot Prototype. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nazaruddin , Md Shah (2007) Voice Activated Switch. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nazli, Amat (2007) Langsir Pintar Untuk Bilik Istimewa. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nazri, Md Daud (2007) Performance Characteristic Of Thermoelectric Module. Masters thesis, Universiti Teknologi Malaysia.

Neo, Lee Sein (2007) Internet Filtering Proxy Version 3. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ng, , Eng Sia (2007) High Flexibility Multi Terrain Rover. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Nik Jom , Eh Kan (2007) Smart Trash Can. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nik Mohd Hafeez, Nik Aziz (2007) Design, Fabricate And Testing Of 2 x 2 Array Antenna At IMT 2000 Band. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nik Nazehan , Nik Omar (2007) Design And Implementation Of Alarm System By Using Microcontroller (AT89S51-33P). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nik Rus Khuzaimah , Nik Azizan (2007) Mobile Robot Monitoring System Using LEGO Mindstorms. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nik Zuraifah , Nik Mohamed (2007) A PIC-Based Temperature Alarm. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Niza , Mohd Idris and Nor Zaidi , Haron and Norhidayah , Mohamad (2007) BENM 2133: Sistem Digit. [Teaching Resource]

Noor Adilah, Othman (2007) Perlaksanaan Ciri-Ciri Tempatan Dalam Rekabentuk Produk Harian. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Ashikin , Othman (2007) Autonomous Mobile Robot Navigating Towards A Preset Target. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Asyikin, Sulaiman (2007) Control Of A Non-Holonomic Mobile Robot. Masters thesis, Universiti Teknologi Malaysia.

Noor Asyikin, Sulaiman (2007) DENE 2333: Elektronik. [Teaching Resource]

Noor Aziana, Abu Taib (2007) Real Time Clock Display By Using Programming Language Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Azlin, Bidin and Safiah , Sidek and Nor Hazlen Niza , Hussein (2007) Professional Communication. Pearson, Prentice Hall.

Noor Hashemy , Musa (2007) Modeling And Simulation Of A Heavy Vehicle. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Noor Mazlina , Mahmod (2007) The University Of Queensland School Of Information Technology And Electrical Engineering. Masters thesis, University of Queensland.

Noor Rahimi, Idiris (2007) Ergonomic Investigation of Hand Tools (Case Study : Bottle Opener). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Safinaz, Sazali (2007) Variable DC Power Supply. Project Report. UTeM, Melaka. (Submitted)

Noor Shahidawati , Omar (2007) Adaptation Of ECG Machine For Real Time ECG Capture Monitoring. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Suzieany , M. Radzali (2007) Membina Perkakasan Untuk Sistem Pengecaman Suara. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nooraihan , Rasip (2007) Digital Remote Thermometer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noorazuan, M. H. and Asmala, A. (2007) TEPUBINA BANDAR: ISU DAN KAITANNYA DENGAN KESIHATAN EKOSISTEM LEMBANGAN SALIRAN. Geografia, 4 (1). pp. 1-20. ISSN 0126-7000

Noorbaizura , Ahmad (2007) Kajian Rekabentuk Ergonomik Kerusi Roda. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noorhisham , Mohd Nor (2007) Strategies To Minimize Error For Line Follower Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noorizraq Mohd , Yasin (2007) Design And Build A New Cold Press Mini Machine Control By Plc (Programmable Logic Control). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noormalini, Ab Razak (2007) Virtual Oscilloscope. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Afandi , Sharif (2007) Manipulator Design For Robotic Oryza Sativa Pesticide Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Akramin, Mohamad (2007) BMFP 4543: Pengurusan Projek (Project Management). [Teaching Resource]

Nor Ashikin , Halim (2007) Develop A 5.8ghz Antenna Using Microstrip Technologies. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Asiah, Mohammad Yusof (2007) Design Software For Automatic Baby Milk Mixer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Azan, Abd.Gani (2007) Entrepreneurial Characteristics Of Technical Graduates From The Employers' Perspective. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Azrin, Nozmi (2007) Effects Of Carburizing On Mechanical Properties Of Low Carbon Steel. Project Report. UTeM, Melaka. (Submitted)

Nor Fairuz Hayati, Amir (2007) Design Improvement Of Portable Writing Chair Suitable For Both Left-Handed And Right-Handed User. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Idayu, Suwarni (2007) Monkey Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Ismawati , Natilan (2007) Design And Development Of Computer Program To Determine 2D Robot Workspace And Safe Working Area. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Izati , Md Salleh (2007) Development Of Standard Time Utilizing Work Method And Time Measurement In QC Department At A Textiles Manufacturing Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Narisq Dada Meah, Md Rashid (2007) Pengukur Jarak Tanpa Tali. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Syakinar , Yaacob (2007) Pemindahan Haba Dalam Tiub Bank. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Syakiroh , Tajudin (2007) Total Productive Maintenance Implementation In Laboratory. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Zaidi , Haron and Amir Shah, Abdul Aziz and Masrullizam, Mat Ibrahim and Sani Irwan, Md Salim (2007) 8-channel logic analyzer controller design FPGA work in progress. In: International Conference On Engineering And ICT (ICE 2007), 27-28 November 2007, Equatorial Melaka Hotel, Malaysia. (Submitted)

Noraini, Kamisman (2007) Merekabentuk Pengawal Logik Fuzzy Untuk Penukar Buck. Project Report. UTeM, Melaka. (Submitted)

Norashikin, Rahman (2007) Work Study For Labor Productivity Improvement Utilizing Process Mapping And MOST. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norasyikin , Md. Salleh (2007) Implementation Of Cross Search (CS) Algorithm In Motion Estimation In Matlab. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Norazura , Md Nor (2007) A Study On Radio Frequency Test Facilities Development For Cubic Electronic Sdn Bhd. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norbayah , Yusop (2007) Implementation Of Four-Step Search (4SS) Algorithm For Motion Estimation In Matlab. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nordin, Mohd Ridzuan and Kasim, Raihani and Mohd Husin , Mohd Haizal and Mohamad, Imran Syakir (2007) TECHNOLOGICAL COMPONENT AND ITS IMPACT ON THE SUCCESS OF SMI IN SKIN CARE PRODUCT. In: International Conference for Engineering and ICT (ICEI 2007) , 27-28 Nov, 2007 , Equatorial Hotel, Malacca, Malaysia .

Norfazlinda , Daud (2007) Application Of Color Sensor In An Automated System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norhaisam, Ismail (2007) An Automated Synchronizing System For Electrical Machine Laboratory (Part 2). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norhasanah , Hassan (2007) Develop A 2.4 Ghz Directional Coupler Using Microstrip Technologies. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norhashimah, Mohd Saad (2007) BENC 4133: Pemprosesan Isyarat Digit. [Teaching Resource]

Norhashimah , Mohd Saad (2007) BENT 2243: Isyarat Dan Rangkaian. [Teaching Resource]

Norhashimah , Mohd Saad (2007) BENT 4133: Pemprosesan Isyarat Digit. [Teaching Resource]

Norhayati , Mohd Zainee (2007) Electronics Multi Repellent. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noridayu, Zainal (2007) Voltage Sags In Distribution System Using PSCAD Software. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norirman , Mansor (2007) Kesan Aerodinamik Pada Struktur Sokongan A (A-Pillar). Project Report. Melaka, Malaysia, UTeM. (Submitted)

Norlindawati , Jamaludin (2007) Design And Implementation Of Parallel Port-Based Data Acquisition System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norliza, Mohd Nordin (2007) Sistem Perghubungan Teks Tanpa Wayar Pada Jarak Dekat (Bahagian Penerima). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norman , Omar (2007) Analysis Of Plastic Flow In Two Plate Injection Mould. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norman Aidil, Rahman (2007) Analyze The Performance Evaluation Between Oil Based Coolant And Environmentally Based Coolant On Cutting Surface In Milling Operation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norpipah , Januddin (2007) Multichip Programmer Board. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Norun Najjah, Ahmat and Siti Rohana , Omar and Hanipah, Hussin and Nor Azilah, Ahmad and Noor Maslian , Othman (2007) The Significance Of Conservation Towards Tourism Industry Of Malacca. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Norwadiah , Mohd Andai (2007) Analysis Of Maximum Temperature And Heat Generation Along The Cutting Tool During Machining. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Nur Aidawaty, Rafan (2007) BMFA 2413: Sistem Kawalan (Control system). [Teaching Resource]

Nur Aidawaty, Rafan (2007) Development of motion control user interface for XY table. In: International Conference on Engineering and ICT (ICEI 2007), 27 -28 Nov 2007, Hotel Equatorial Melaka. (Submitted)

Nur Akmal , Zakria (2007) Wireless House Entry Device. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Alisa , Ali (2007) DENC 2443: Sistem Digit. [Teaching Resource]

Nur Asyrani Hanis , Samsudin (2007) VSS Approach To DC Motor Drives. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Azizulhakim , Zakaria (2007) Development Of Welding Aid Kit For Shielded Metal Arc Flat Welding. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Azzatun, Azmi Noordin (2007) Subscriber Prepaid System (SPS) For Company Commission Of Malaysia. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Nur Diyana, Mohd Sobree (2007) (The Prototype Of A Light Seeking Robot Using PIC Microcontroller). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Diyana , Ismail (2007) Design Of A Low Noise Amplifier For 5-6GHz Applications. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Fadhillah, Saleh (2007) Sub-Contractor Performance Quality Evaluation System (PQeVS). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Hanisah , Buang (2007) Investigation of Handphone Manufacturing Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Khairul Zhafran , Muhd Nur Akmar (2007) Inverter Circuit For Uninterruptible Power Supply (UPS). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Massyitah , Yaakob (2007) Implementation Of Cross-Diamond Search Algorithm For Motion Estimation In Matlab. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Nur Nabila, Jasni (2007) Metal Detector. Project Report. UTeM, Melaka. (Submitted)

Nuraida , Mohd Ramlee (2007) Process Optimization For Plastic Injection Mould Case Study-Container Mould. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Nuranisha, Mat Ghani (2007) A Comparison Of Hand Phone Primary Packaging By Using Pugh Method (Case Study). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurdhiya Safra , Ab Wahid (2007) Router Webadmin System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurdzila , Jaini (2007) Investigation The Repeatability Performance Of Parallel Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurfaizey , Abdul Hamid (2007) The design of light weight automotive brake pedal. Masters thesis, Coventry University.

Nurhasikin , Mahmood (2007) Development Of Pingpong Ball Collector Robot-Cmucam2. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurliyana, Abdul Aziz (2007) Master Bedroom Remote Control System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurnajihar , Hj A Rani (2007) New Incumbent Mentoring Report System. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Nurul A., Emran (2007) A Web-Database Application For Biological Data Management Of Fungi Species. In: Proceedings of the Second International Conference on Internet Technologies and Applications, 4th September 2017, Wrexham, Wales, UK.

Nurul Adzhar , Mohamad (2007) Fabrikasi Dan Menguji Prestasi Mesin Hidrolik Pebengkok Paip Manual. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Ain , Burhanuddin (2007) Smart Card Application In University Area. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Ashikin, Abd Samad (2007) Cortisol Diagnosis Tool. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Asima , Zainon (2007) Kajian Kebolehlaksanaan Metanol Sebagai Bahan Api Enjin. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Nurul Asyiqin , Zainal (2007) Analysis And Duct Simulation Using Air Conditioning Laboratory Unit. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Azman, Mohd Ali (2007) Soccer Robot : RF Wireless Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Fateen , Shukarnu (2007) Investigation Of Maximum Stress On Carbon Fiber Laminate Composite With Hole Using Finite Element Analysis (FEA). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Hidayah , Arshad (2007) A Study Of Design For Environment Using Life Cycle Approach For Semiconductor Packaging Processes. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Huda , Muhammad (2007) Knowledge Management In Manufacturing Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Syarafina , Sholahuddin (2007) Analysis Of Plastic Flow Inside The Three Plate Mould. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurulfajar , Abd Manap and Abd Shukur , Ja'afar (2007) BENC 1123: Algoritma Dan Struktur Data. [Teaching Resource]

Nuruliswa, Abdullah (2007) Design Of A Broadband Amplifier Based On Twa For Broadband Application. Project Report. UTeM, Melaka. (Submitted)

O

Ong , Hwei Bing (2007) Theoretical Study & Field Measurement Of Noise Exposure In Industry Based On Noise Exposure Regulations 1989. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ong , Jaw Feei (2007) Performance Of Voice Over Internet Protocol (VOIP) In Wireless Local Area Network (WLAN). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ooi , Sen Jye (2007) Application Of Modern Product Development Tools In Product Design Development. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Ooi , Zhuen Hong (2007) Environmental Ergonomics At Highway Toll Booth. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Othman, Abdul Rani and Wasli, Chairulsyah and Ahmad, Mohd Riduan (2007) 2.4 GHz Microstrip Antenna Arrays. In: The 1st International Conference on Engineering and ICT, 2007, Melaka, Malaysia, Melaka.

Othman, A. R. and Ibrahim, I. M. and Samingan, M. S. A. S. and Aziz, A. A. A. and Selamat, M. F. M. and Halim, H. C. (2007) SINGLE STAGE RF AMPLIFIER AT 5.8GHZ ISM BAND WITH IEEE 802.11a STANDARD. In: 2007 Asia-Pacific Conference on Applied Electromagnetics (APACE), 4-6 December 2007, Melaka.

Othman, A. R. and Ibrahim, I. M. and Selamat, M. F. M. and Samingan, M. S. A. S. and Aziz, A. A. A. and Halim, H. C. (2007) 5.75 GHz Microstrip Bandpass Filter for ISM Band. In: 2007 Asia-Pacific Conference on Applied Electromagnetics (APACE), 4-6 December 2007, Melaka.

Othman, A.R and Abd Aziz, A.A and IIbrahim, I. and Sahingan, S.A and Selamat, M.F and Che Halim, M.H (2007) Simulation of Cascading LNA and RF Amplifier for Front-End Direct-Conversion Receiver at 5.8 GHz. In: 2007 Asia-Pacific Conference on Applied Electromagnetics (APACE), 4-6 December 2007, Melaka.

Othman , Aman and Abu Bakar, Yusof (2007) The Effect Human Resource Practices And Inovation Activities Among of SMEs Development In Manufacturing Sector. Project Report. UTeM, Melaka, Malaysia. (Submitted)

P

Pathmarajan , Thuraippah Varatharajan (2007) Application Of Rotoscoping And Lip Synching In The Development Of 2D Animated Video. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Precilla, Sylvester Sabuk (2007) Study Of Surface Integrity Of Aisi D2 Steel When Machined With Uncoated And Coated Carbide. Project Report. UTeM, Melaka, Malaysia. (Submitted)

R

Rafidah, Abd Rashid Khan (2007) Malacca Travel Assistant. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rafis Suizwan, Ismail / Hussain (2007) CFD Simulation And Subsonic Wind Tunnel Testing On A Model Of Mitsubishi Evolution 6. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Raja Izamshah, Raja Abdullah (2007) BMFS 3373: Teknologi CNC (CNC Technology). [Teaching Resource]

Raseeda, Hamzah (2007) PC Based Oscilloscope By Using PIC 16F877A (Hardware). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rasidah , Abdul Rani (2007) Kesan Harmonik Pada Pengubah. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rasin, Zulhani (2007) Proximity coupled stacked configuration for wideband microstrip antenna. In: 2007 Asia-Pacific Conference on Applied Electromagnetics Proceedings, APACE2007, 4-6 Dec 2007, Melaka, Malaysia.

Rathika , Jagaswaren (2007) Design Of Controlled Computerized Room. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Ravindran , Letchamanan (2007) Microcontroller Based On Fire Alarm System Using Sensory And Monitoring System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Razali, Mohd Tihth (2007) Application Of Quality Function Deployment In The Development Of Multimedia Payphone Base Station Concept Design. Masters thesis, Universiti Putra Malaysia.

Razif, Ismail (2007) The Development Of Backhoe Attachment Unit Research Platform. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Redzuan, Abdul Manap (2007) Intelligent Pre-Paid Dispenser. Project Report. UTeM. (Submitted)

Redzuan , Abdul Manap (2007) BENT 2143: Analisis Rangkaian. [Teaching Resource]

Ridzuan , Samat (2007) Sistem Kawalan Rumah Berautomasi. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Riezan , Bohari (2007) Automated Guided Electric Vehicle. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Robani, Anidah (2007) Islam in Malaysian Foreign Policy : A Pragmatic Approach. International Journal of Muslim Unity. pp. 41-75. ISSN 1675-7777

Ros Azura, Mohsin (2007) Fatigue Study On Metal Using Tensile Load. Project Report. UTeM, Melaka. (Submitted)

Rosfatimah , Abd Talib (2007) M-Learning: Science Year 1 (Using Our Senses). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Roshidah , Abd Rashid (2007) The Legend Of Puteri Gunung Ledang 2D Animation. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Rosidah, Jaafar (2007) Design And Analysis of Plastic Injection Moulded Part For Two Plate Injection Mould. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rosman , Abd Rahim (2007) DENE 1122: Pengukuran. [Teaching Resource]

Rostam Affendi, Hamzah (2007) DENG 1113: Asas Elektronik & Mikropemproses. [Teaching Resource]

Rostam Affendi, Hamzah (2007) DENG 2113: Mikropemproses. [Teaching Resource]

Rostam Affendi , Hamzah (2007) DITG 1112: Kemahiran Komputer. [Teaching Resource]

Roziman , Ismail (2007) Implementation Problems In Lean Manufacturing : A Study On Manufacturing Industries. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rozita , Salehudin (2007) Pengukuran Aliran Bendalir Menggunakan Venturi Meter Dengan Kaedah Eksperimen Dan Simulasi CFX. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rozlan , Ramli (2007) Mereka Bentuk Tangki Kenderaan Gas Asli. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Rudy Idzuan , Samsuddin (2007) Study And Improvement Of Industrial Pump Impeller Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rumaizah , Akumin (2007) A Design And Development Of Antenna Rotational Table System For Radiation Pattern Test For Small Size Antenna. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ruslina , Rusmani (2007) Competency Level Examination Online System (CLEOS). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ruzy Haryati , Hambali (2007) BMFR 3143: Reka Bentuk Alat Pengeluaran (Production Tools Design). [Teaching Resource]

S

Saaya, Zurina and Devaraju, Anusuriya and Mustafa, Nuridawati and Chew, Choon Leong (2007) The Implementation of Questionnaires Design Principles Via Online Questionnaire Builder. In: International Malaysian Educational Technology Convention, 2-5 Nov 2007, Johor Bharu, Johor.

Saaya, Zurina and Mustafa, Nuridawati and Devaraju, Anusuriya (2007) The Development of Practical Guidelines for Designing Online Questionnaires. In: National Conference on Software Engineering & Computer Systems 2007 (NaCSES'07), Pahang, Malaysia.

Sabar Andri, Johari (2007) Pembinaan Generator Linear Beskala Kecil. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Safei, Su'aidi (2007) Computer Assisted Teaching Methodology. In: Workshop on Teaching Methodology , 24-25 September 2007, Universiti Islam Sultan Sharif Ali (UNISSA), Bandar Seri Begawan.

Safei, Su'aidi (2007) IU 3223: Ulum Hadith, IU 4201: Ilmu Kalam & Pemikiran Islam, IS 3266: Siyasah Syar’iyyah. [Teaching Resource]

Safei, Su'aidi (2007) PA 1401, Islam dan Pendidikan (education). [Teaching Resource]

Safei, Su'aidi (2007) PA 4219, Kaedah Pengajaran Ugama II. [Teaching Resource]

Safei, Su'aidi (2007) Practical Da'wah Methodology in Modern Context. In: International Da'wah & Youth Development Seminar, 2007, UKM, Bangi, Selangor.

Safei, Su'aidi (2007) Report on Teaching Methodology Workshop. In: Workshop on Teaching Methodology , 25 Sept.2007, Universiti Islam Sultan Sharif Ali (UNISSA), Bandar Seri Begawan.

Safei, Su'aidi and Daniel, Finaz (2007) Workshop UNISSA Paper Coverage. The Brunei Times. p. 1. ISSN 0049-3929

Safiah, Sidek (2007) A Computerised Investigation Into Technical Expressions And Structures In Engineering Texts : A Development Of Est (English For Science And Technology) Corpus For UTeM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Safwan , Saripuddin (2007) Merekabentuk Dan Menganalisis Pemegang Laptop Mudah Alih Di Dalam Kenderaan Penumpang. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sahazati , Md Rozali and Saifulza , Alwi Suhaimi and Che Amran, Aliza (2007) BEKC 2333: Pengantar Sistem Kawalan. [Teaching Resource]

Said, Mohamed Azmi (2007) BEKC 4773: Robotik & Automasi. [Teaching Resource]

Saidah , Khalid (2007) Analysis Of Working Posture Of Operator In Mixing Department Of An SMI In Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Saifol Azman , Nordin (2007) Gage Capability Study Of Thin Film Coating Thickness Measurement Method Using Scanning Electron Microscopes (SEM). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Saiful Yazan , Abd Karim (2007) Low-Cost PC-Based Video Surveillance System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Saifulza , Alwi Suhaimi (2007) BEKC 4783: Sistem Pintar. [Teaching Resource]

Sairizal , Misri (2007) Design Improvement On A Method Of Inflating The Inflatable Articles. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Salam, Zainal and Ayob, S.M and Ramli, Mohd zulkifli and Azli, N.A (2007) An Improved `DC-DC Type' High Frequency Transformer-Link Inverter by Employing Regenerative Snubber Circuit. In: Power Electronics and Drive Systems, 2007. PEDS '07. 7th International Conference on, 2007, Bangkok.

Salbanu, Said (2007) Reverse Engineering Of Hand Phone Housing Plastic Injection Molding. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Salehuddin , Talib (2007) The Design Of Water Flow System For Leaching Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Salim, Norhafiz (2007) Kawalan Jauh Perlampuan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Salmiah, Maulan (2007) Ergonomics Assessment For Assessing Thermal Confort At Learning Facilities In UTeM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Salmiah, Nisa @ Maddin (2007) Temperature Stabilizer System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Samsi, Md. Said (2007) BMFA 3433: Sistem Kecerdikan Buatan (Artificial Intelligence System). [Teaching Resource]

Samsul , Setumin (2007) DENG 2223: Asas Elektronik Dan Mikropemproses. [Teaching Resource]

Sani Irwan , Md Salim (2007) BENC 4123: Sistem Masa Nyata. [Teaching Resource]

Sani Irwan , Md Salim (2007) BENM 3123: Mikropemproses 2. [Teaching Resource]

Sarah, Mohamad Ali (2007) Temperature Flow Controlled Fan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sarini , Ramli (2007) Assessment Of Working Posture In Manufacturing Industry Using Rula Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sark, Li Lian (2007) Digital Altimeter Based On PIC Microcontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sazelin , Arif and Norain , Ismail and Shahrulanuar , Mohamed (2007) Development Of Opportunity Towards Commercialization Of Intellectual Property Among Halal Food Manufacturers In Melaka. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sazratulasma , MD Saad (2007) Analysis Of C-Band, Ku-Band And Ka-Band For Satellite Communication In Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Selamat, S. R. and Yusof, R. and Kong, P. R (2007) Implementation of Identity Based Encryption in e-Voting System. In: Conference on Information Technology Research and Applications 2007 (CITRA 2007), 4-5 April 2007, Selangor, Malaysia.

Seri Rahayu , Kamat (2007) BMFP 4512: Pengurusan Industri & Kos ( Industri Management & Cost ). [Teaching Resource]

Shafizal , Mat (2007) The effect of lean NOx trap catalyst on NO2 removal from diesel engine. Masters thesis, Coventry University.

Shah Erawati, Mokhtar (2007) Design Of Geometrical Array Microstrip Antenna. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shahbodin, F. (2007) THE DEVELOPMENT OF MULTIMEDIA COURSEWARE FOR MALAYSIAN’S SECONDARY SCHOOLS USING HYBRID PROBLEM BASED LEARNING APPROACH. In: International Conference on Eduaction 2007, Brunei.

Shahbodin, F. and Badioze Zaman, H. and Bakar, N. (2007) Applying Hybrid Problem Based Learning Approach in Developing C2HADAM. Journal of Technology Management and Entrepreneurship, 6 (1). pp. 59-74. ISSN 1675-8404

Shahima , Mohd Nadzri (2007) Kajian Mengenai Kemungkinan Menggunakan Motor Orbital Sebagai Meter Kadar Alir Hidraulik Pengukur Di Dalam Makmal Hidraulik Dan Pneumatik FKM UTeM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shahridzuwal , Md Jabarulla (2007) Design And Development Of An Accurate Screwing Method For Fastening Vertical Position Screw. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shahril Izwan , Ahmad Shah (2007) Development Of Ping Pong Ball Collector Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shahrin , Sahib and Mohd Faizal, Abdollah and Robiah, Yusof and Siti Rahayu, Selamat (2007) Real Time Traffic Classification For Intrusion Detection System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shahrizan , Mazlan (2007) Pergerakan Kenderaan Terkawal Menggunakan Peranti Logik Boleh Program (PLD). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shahrudin, Zakaria (2007) BEKC 3653: PLC & Automasi. [Teaching Resource]

Shahrudin , Zakaria (2007) BEKC 3653: PLC & Automasi. [Teaching Resource]

Shahrul Eazril, Bakri (2007) Bow-Tie Microstrip Antenna Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shahrul Nizam , Abd Kadir (2007) Reverse Engineering Of A 6 Axis Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shahrul Nizam , Mohd Yusoff (2007) Analyze The Performance Evaluation Between Oil Based Coolant And Environmental Based Coolant On Tool Wear In Turning Operation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shajahan, Maidin (2007) Development Of Robot Base Vision System For Part Recognition And Location. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shamsul Asri , Mohd Yusof (2007) Analysis Performance Of Tic-Carbide Cutting Tools When Turning With AISI 1045 Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sharatul Izah , Samsudin and Azdiana , Md Yusop (2007) BENE 1113: Prinsip Elektrik Dan Elektronik. [Teaching Resource]

Shariman , Omar (2007) Tortoise robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sharimlah Devi, Ramachandran and Rajendran, Elangsegaran and Nik Rahila, Wan Ibrahim (2007) An Investigation On The Relationship Between Organisational Culture And Knowledge management In An Institution Of Higher Learning - KUTKM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sharimllah Devi, Ramachandran and Rajendraan, Elangsegaran and Nik Rahila , Wan Ibrahim (2007) An Investigation On The Relationship Between Organisational Culture And Knowledge Management In An Institution Of Higher Learning : KUTKM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sharizal , Sulaiman (2007) Model Kinematik Songsang Bagi Robot Kecil Berjalan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sharmini, Mohan (2007) Software System For Mould Manufacturing Purposes With Mobile Technology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shazrina Mazny , Mazlan (2007) The Robot Navigation System By Using Lego Mindstorm. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sheikh Fahmi , Mohamed Bamadhaj (2007) A Study On Quality Tools And Techniques Based On Swot Analysis At CTRM AC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shibghatullah, Abdul Samad and Abdullah, Nazri (2007) Analysis and Design of Integrated Vehicle and Crew Scheduling System Using GAIA Methodology. In: Conference on Information Technology Research andApplications 2007 (CITRA 2007), 4 - 5 April 2007, Selangor, Malaysia.

Shuharzi , Md Salleh (2007) Merekabentuk Dan Membentuk JIGS Untuk Ujian Ricih. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sia , Sook Kian (2007) Peer-To-Peer Search Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sim , Poh Li (2007) A Study On The Influence Of Fuel Additives On Engine Exhaust Emission. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Siti Aisah , Mat Junos @ Yunus (2007) DENC 2433: Litar Logik. [Teaching Resource]

Siti Aisah , Mat Junos @ Yunus (2007) DENE 1323: Prinsip Elektronik. [Teaching Resource]

Siti Aminah , Abd. Wahid (2007) Remote Control Ceiling Fan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Arzah , Mohamad Hassan (2007) Rekabentuk Struktur Kenderaan Dalam Air Secara Kawalan Jauh (ROV) Bagi Kegunaan Eksplorasi. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Arzah , Mohamad Hassan (2007) Rekabentuk Struktur Kenderaan Dalam Air Secara Kawalan Jauh (ROV) Bagi Kegunaan Eksplorasi. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Azura , Md Said (2007) Generalization Of P2P Traffic Pattern. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Balqis Nurilyani , Ibrahim (2007) Study of product architecture for design for maintenance. Project Report. Universiti Teknikal Malaysia Melaka. (Submitted)

Siti Dora , Mohd Halid (2007) Pesticide Inventory Management System In Pertubuhan Peladang Kawasan Pengerang (PPKPG). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Farah Nadiah , Taib (2007) Design Of An Improved Production Layout For A Shoe Making Factory: A Case Study Of A Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Farha , Abdul Manan (2007) Developing The Material In Industry Using 3D Modelling. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Huzaimah , Husin and Farid Arafat , Azidin (2007) BEKG 3113: Kawalan Industri. [Teaching Resource]

Siti Huzaimah , Husin (2007) DENE 3263: Elektronik Industri. [Teaching Resource]

Siti Khadijah , Idris @ Othman and Abdul Majid , Darsono (2007) BENT 2113: Litar Elektrik 2. [Teaching Resource]

Siti Lydia, Rahim (2007) Analysis And Optimization Of Process Parameters Involved In Laser Beam Machining Of Stainless Steel (6MM And 8MM Thickness). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Mariam , Hussain (2007) Digital Instrument Display For Cars. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Munirah , Ibrahim (2007) In Space Prayer Times Calculator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Norhazlina, Shafie (2007) Fingerprint Identification. Project Report. UTeM, Melaka. (Submitted)

Siti Norsuraya, Hussain (2007) Development Of Anthropometry Database For The Primary School Furniture Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Rafidah , Mamat (2007) Reverse Engineering Of Pharmaceutical Bottlepack Cap By Plastic Injection Mould. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Rahayu, Selamat and Wahidah, Md. Shah and Shekh Faisal, Abdul Latip and Nanna Suryana, Herman (2007) Multimodal Biometric For Corporate Attendance System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Sahara , Abdullah Shani (2007) Development Of Robot Selection Strategy For An Application Using Ms Visual Basic. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Saudah , Mohd Nasir (2007) Information Requirement For Mould And Die Process Planning Activities. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Sivakumar, Dhar Malingam and Mohd Radzai , Said and Ahmad , Rivai and Tan , Chee Fai (2007) Buckling Behaviour Of Shallow Vee Section Beams. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sivarao, Subramonian (2007) LINGUISTIC FUZZY MODELING IN LASER MACHINING QUALITY EVALUATION. In: Malaysian Science and Technology Congress (MSTC2007), 4-6 September 2007, Holiday Villa, Kuala Lumpur.

Sivarao, Subramonian and Samsudin, Abdul Rahim and Taufik, , and Ammar, Abd Rahman (2007) Coating Characterization of TiN & TiAlN on Burr Formation in Drilling – Pragmatic Investigation. In: International Conference on Engineering &ICT (ICEI’07), 27-28 Nov. 2007, Equatorial Hotel, Melaka.

Sivarao, Subramonian and Taufik, , (2007) Design and Development of an Automobile Brake Lining Monitoring System. In: International Conference on Engineering &ICT (ICEI’07), 27-28 Nov. 2007, Equatorial Hotel, Melaka.

Sivarao, Subramonian (2007) BMFS 3363: Teknologi Mesin Peralatan (Machine Tools Technology). [Teaching Resource]

Sivarao, Subramonian (2007) MICRO QUALITY INVESTIGATION OF Mn-Mo PRESSURE VESSEL PLATE IN LASER MACHINING. In: World Engineering Congress 2007, 5 – 9 August 2007, Penang, Malaysia.

Sivarao, Subramonian and Taufik, , (2007) Coating characterization of TiN & TiAIN on burr formation in drilling pragmatic investigation. In: International Conference on Engineering and JCT (ICE! 2007),, 27 -28 Nov 2007, Hotel Equatorial Melaka.. (Submitted)

Sivarao, Subramonian and Taufik, . (2007) Comparative quality investigation of rolled and flat carbon steel plates in drilling. In: International Conference on Engineering and ICT (ICEI 2007), 27 -28 Nov 2007, Hotel Equatorial Melaka.. (Submitted)

Soleha , Rossdy (2007) A Study On Manufacturing Information Requirements For Electronics Assembly. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Soo, Wai Hong (2007) Development Of Modular Jigs And Fixture For CATIA. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Soong,, Hoong Cheng (2007) Cemetery System. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Sudin, Mohd Nizam and Harun, Mohd Ruzi and Shamsuddin, Shamsul Anuar (2007) A PROTOTYPE OF KBS FOR MATERIAL SELECTION IN BUMPER BEAM DESIGN. Suranaree J. Sci. Technol., 14 (3). pp. 215-222. ISSN x

Sufian, Mohamed Nor (2007) Development Of Coconut Shell Powder Reinforced HDPE Composites. Project Report. UTeM, Melaka. (Submitted)

Sufian Sauri , Ahmad (2007) Sistem Penggera Pengesan Inframerah Pasif. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Suhaila , Yacob (2007) Study The Parameter Optimization In The Injection Molding. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Suhana , Mohd Gazi (2007) Design And Development Casting Mould Pattern (Keris). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sujanuriah , Sahidi (2007) Study Of Safety Improvement For Wood Dust Hazard In Furniture Production Line. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sulaiman , Marizan (2007) BEKC 4683: Sistem Kawalan Digit. [Teaching Resource]

Sulong, Muhammad Suhaizan and Abdul-Aziz, Azlianor and Kamalrudin, Massila and Abdullah, Muhammad Haziq Lim and Abdullah, Fauziah (2007) Destination-Oriented Route in Integrated LRT Web-Based System for Tourism. In: 2nd International Conference on Electrical Engineering and Informatics (ICEEI), 17-19 Jun 2007, Bandung, Indonesia.

Supardi , Dawing (2007) Soccer Robot : Robot Development. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Suria Azlin , Ismail (2007) Control Of X-Y Table Using Siemens PLC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Suriani, Mohamed (2007) eCare - Health Science System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Suriati, Akmal (2007) BMFP 3543: Kejuruteraan Metrologi (Engeering Metrology). [Teaching Resource]

Suriati, Akmal (2007) BMFP 3543: (Engineering Metrology). [Teaching Resource]

Suriati , Abd Rahim (2007) Photosynthesis Process In 2D And 3D Animation For Secondary School. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Suzli Elimi , Zulkefli (2007) Dancing Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sy Ahmad Fairuz , Yulaimi (2007) Mengoptimumkan Pengisian Gas Petroleum Cecair (LPG) Daripada Tangki Komersial Kepada Tangki Kenderaan. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Syafeeza , Ahmad Radzi (2007) BENC 3113: Kejuruteraan Perisian. [Teaching Resource]

Syafeeza , Ahmad Radzi (2007) DEKG 2243: Teknologi Elektrik. [Teaching Resource]

Syafinaz Zuriati , Baharuddin (2007) Smart Aquarium (Automatic Feeding Machine). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syafiza, Ab Wahab (2007) Mobile Learning Notes For SPM Sejarah - Islam Di Asia Tenggara. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syahruddin , Muhd Saleh (2007) Optical Transmission Of Voice Signal Using Square Wave Frequency Modulation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syamimi, Shamsuddin (2007) Automasi Industri (Industrial Automation). [Teaching Resource]

Syamimi, Shamsuddin (2007) BMFA 4443: Automasi Industri (Industrial Automation). [Teaching Resource]

Syarina, Ismail (2007) M-Learning - A Prototype Of Accelerated Pre-Reading Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syauqi , Rosli (2007) Path Planning For Mobile Robot Navigation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syed Annuar Afzan , Syed Abd Rahman (2007) Litar Penerus Untuk Sistem Bekalan Kuasa Kecemasan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syed Jamil Rusydi, Syed Baharom (2007) Mechanical Characterization Of Polymer Matrix Composite (Low Density Polyethylene With Rubber). Project Report. UTeM, Melaka. (Submitted)

Syed Mohd Fadly , Syed Hassan (2007) Reverse Engineering Of Dogbone Mould Into Another Product. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syobirin , Abd Kadir (2007) Kajian Optimisasi Ke Atas Enjin 2 Lejang Jenis Gerakan Sendeng. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Syuhadah, Zainal Abidin (2007) Effects Of Carburizing On Mechanical Properties Of Low Alloy Steel. Project Report. UTeM, Melaka. (Submitted)

shariff, zulkifli (2007) Innosat konsep pembangunan, penaksiran risiko, analisa keupayaan daya kebolehtahanan meter-pecut, rate-giro dan pemproses sistem kawalan penentu attitud (ADCS) bagi inertia measurement unit (IMU). Masters thesis, Universiti Kebangsaan Malaysia.

T

Taib Walid , Mohamad (2007) Mesin Urut Kaki Berkos Rendah Yang Dikawal Oleh PIC. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Talib, Md Hairul Nizam and Azri, Maaspaliza (2007) BEKE 1213: Peranti Elektronik. [Teaching Resource]

Tamil Chelvi , Vadivelu (2007) Analysis On Telnet And SSH. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tan , Kim See (2007) BENE 2163: Sistem Elektronik. [Teaching Resource]

Tan , Kim See and Fauzi, Abdul Wahab and Maisarah, Abu (2007) Investigation And Detection Of Any Form Of Electrical Signal And Behavioral Pattern Produced By Mosquitoes Found In Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tan , Kim see (2007) BENT 3133: Elektromagnetik. [Teaching Resource]

Taufik, - (2007) BMFG 2813: Termo-Bendalir (Thermo-Fluids). [Teaching Resource]

Tay, Choo Chuan and Ahmad, Abd Ghafur (2007) Kesferaan Dan Kumpulan Gambar Rajah Bagi Persembahan Monoid Campuran. In: Simposium Kebangsaan Sains Matematik ke -15, 5-7 Jun 2007, Hotel Concorde, Shah Alam.

Tay , Choo Chuan (2007) Kenirsferaan Bagi Persembahan Monoid Campuran Dengan Menggunakan Kaedah Ujian Pemberat Teritlak. PhD thesis, Universiti Kebangsaan Malaysia.

Tengku Hasanul Adlan , Tengku Bahanuddin (2007) Investigation Of Surface Roughness And Accuracy In EDM Wire-Cut. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Teoh, Wei Yee (2007) An Automated Synchronizing System For Electrical Machine Laboratory (Part 1). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Too , Phooi Yee (2007) Digital Document Management System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tuan Hafizah , Tuan Hussin (2007) Pencengkam Robot Prismatik. Project Report. UTeM, Melaka, Malaysia. (Submitted)

V

Vigneswara Rao , Gannapathy (2007) PDA Universal Time Synchronization Using GPS Receiver. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Vincent , Arun Kenadzir (2007) The 4-Dof Parallel Robot: Control System Development. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Voon, Pei Hee (2007) Versatile Dot Matrix Display With Time Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

W

Wan Fazlini Idayu, Wan Fakari (2007) Wireless Computer Presenter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Hasrulnizzam, Wan Mahmood (2007) BMFP 3523: Pengurusan Kualiti (Quality Management). [Teaching Resource]

Wan Hasrulnizzam, Wan Mahmood (2007) BMFP 4563: Strategi Pembuatan (Manufacturing Strategy). [Teaching Resource]

Wan Hasrulnizzam , Wan Mahmood (2007) BMFP 2522: Kualiti & Kebolehpercayaan (Quality & Reliability). [Teaching Resource]

Wan Hasrulnizzam , Wan Mahmood and Zuhriah, Ebrahim (2007) Development Of An Office Total Productive Maintenance System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Mahmood, Wan Hasrulnizzam and Muhamad, Mohd Razali and Ramli, Mohd Irman (2007) Industrial Application Of Value Stream Mapping In Developing Best Practices For Productivity Improvement. In: World Engineering Congress 2007, 5 – 9 August 2007, Penang, Malaysia.

Wan Mohd Azlan , Wan Nawan (2007) Mengawal Kedudukan Motor Arus Terus. Project Report. UTeM, Melaka. (Submitted)

Wan Mohd Idham, Wan Ibrahim (2007) PC Based Spectrum Analyzer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Mohd Irham , Wan Ahmad (2007) Switching mode power supply using boost converter-discontinous current mode. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Nahijah , Mohamad (2007) E-Catalog Template. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Wan Nazri , Wan Mhd Shuhaimi (2007) Real Time Barcode Reader For Laboratory Attendence (Software). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Noor Azrina , Wan Azhari (2007) Observation Of Quality Inspection Standard For Shoe-Making Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Sazli Nasaruddin , Saifudin (2007) FTMK Virtual Direction Navigation (V-DirNav). Project Report. Melaka, Malaysia, UTeM. (Submitted)

Wesley , Taising (2007) Kajian Tentang Kawalan Sambungan Fleksibel Yang Berputar. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Widodo, Wahyono Sapto (2007) BMFG 1823: Statik & Kekuatan Bahan (Static & Strenght Of Materials). [Teaching Resource]

Wong, Ronny Peng Seong (2007) Electronic Book Selling System (eBSS). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Woo, Foong Hua (2007) Blood Test System (BTS). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Y

Yew, Sook Fun (2007) Web Server Monitoring System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yew, Sook Fun (2007) Web Server Monitoring System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yong , Yen Nee (2007) Arm Robotic System By Using Lego Mindstorm. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yong Mahmod Iskandar , Ab. Wahab (2007) Lapisan Sempadan Bergelora Pada Plat Rata Dengan Pelbagai Kekasaran. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yusmarnita, Yusop (2007) BENE 3153: Elektronik Kuasa. [Teaching Resource]

Yusmarnita, Yusop and Siti Huzaimah, Husin and Zulhairi, Othman and Siva Kumar, Subramaniam (2007) Obstacle Avoidance For Mobile Robot Using Vision System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yusmarnita, Yusop and Siti Huzaimah, Husin and Zulhairi , Othman and Siva Kumar , Subramaniam (2007) Pc-Based For Power Failure Monitoring. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yusmarnita , Yusop (2007) BENE 4143: Pembuatan Automatik. [Teaching Resource]

Yusnita , Mohd Bani (2007) Merekabentuk Dan Pembangunan Jet Dalam Karburetor Menggunakan Enjin Suapan Cecair Gas Petroluem. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Yusof, R. (2007) Network Analysis and Design. Penerbit Universiti. KUTKM, Malaysia. ISBN 983-40684-6-8

Yusof, R. and Abdollah, M. F. and Sahib, S. (2007) Network Administration & Management. Venton Publishing, Kuala Lumpur, Malaysia. ISBN 978-983-3526-44-6

Yuzaine, Samilan (2007) Autonomous Mobile Robot Navigating Towards A Preset Target. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Z

Zahariah , Manap and Farid Arafat , Azidin and Fauzi , Abdul Wahab (2007) BENP 2183: Instrumentasi Elektronik. [Teaching Resource]

Zahariah , Manap and Hazura , Haroon (2007) BENT 1133: Litar Elektrik 1. [Teaching Resource]

Zaid , Mohd Ismail (2007) Search And Rescue Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zain, A.F.M and Bong, EH and Abdullah, S and Abdullah, M and Homam, M.J and Ho, Yih Hwa (2007) Some effects of earthquakes at North Sumatra to the total electron content in the Ionosphere. In: European Geosciences Union General Assembly 2007, 15 - 20 April 2007, Vienna, Austria,.

Zainudin, Mohamad Zahir (2007) Masalah sosial dan hala tuju masa depan keluarga di Malaysia. zahirzainudin.blogspot.com. (Unpublished)

Zakaria, Mohd Hafiz and Mohd Sanusi, Nurazlina and Yusof, R. and Ahmad, S. and Salam, S. (2007) Software Project Management. Venton Publishing, Kuala Lumpur, Malaysia. ISBN 978-983-3526-37-3

Zakaria , Hamzah (2007) The Study Of Aerodynamic Effect On Spoiler. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Zakaria , Jamil (2007) Development Of Vision System Using MATLAB. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zakaria , Md Noor (2007) Sistem Kawalan Suis Berkomputer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zakiah , Daud (2007) Automatic Alarm Dial (AAD) System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zakiah , Ismail (2007) Designing 2 Degree Of Freedom (2dof) Pneumatic Control Table Using Simulation Software. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zaleha, Mustafa (2007) BMFB 3233: Bahan Polimer (Polymer Materials). [Teaching Resource]

Zamre, Abd Ghani (2007) Wireless Speed Control With Voice For Wheelchair Application. Masters thesis, UTM.

Zamri Anuar , Zainol Abidin (2007) Research And Analysis Of The Two-Stroke Swivel Motion Engine. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Zamzuri , Mohamad Zainon (2007) Autonomous Subsurface Vehicle (ASV) Forward Maneuvering Control Using Fuzzy Logic. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zarifah, Talip (2007) Sistem Perhubungan Teks Tanpa Wayar Pada Jarak Dekat (Pemancar). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zarina , Baharudin Zamani (2007) BENC 4113: Organisasi Dan Senibina Komputer. [Teaching Resource]

Zarina , Mohd Noh (2007) DENC 3453: Mikropemproses. [Teaching Resource]

Zarina , Mohd Noh (2007) DENC 3363: Kejuruteraan Komputer. [Teaching Resource]

Zariyanti, Paijoo (2007) Electrode Tool Wear Analysis Under Various Cutting Parameters In The Die Sinking Electrical Discharge Machine (EDM). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zariyanti, Paijoo (2007) Safety Health And Environment : Potential Risk In Construction Industry (Confined Space And Scaffolding). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zhafran Aizat , Zakaria (2007) Productivity Improvement By Using Line Balancing Technique Case Study At An Electronic Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zulhairi , Othman (2007) BENE 4113: Robotik Industri. [Teaching Resource]

Zulhairi , Othman and Mohd Shakir , Md Saat (2007) BENE 4123: Pneumatik Industri. [Teaching Resource]

Zulhashikin , Talib (2007) Design And Modeling Of Automated Sorting System In Manufacturing Industry Using Simulation Software. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zulhilmi Faiz , Ahmad (2007) Development Of Ping Pong Ball Collector Robot (Software). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zulkarnain , Zainudin (2007) BENE 4173: Teknologi Kuasa. [Teaching Resource]

Zulkarnain , Zainudin (2007) BENE 4133: Pemacu Elektrik. [Teaching Resource]

Zulkefle, Ahmad Aizan (2007) BEKC 2433: Isyarat Dan Sistem. [Teaching Resource]

Zulkefle, Ahmad Aizan and Abdul Rahman, Ahmad Idil (2007) BEKC 2433: Isyarat Dan Sistem. [Teaching Resource]

Zulkeflee, Abdullah (2007) BMFG 4812: Jurutera Dalam Masyarakat (Engineers In Society). [Teaching Resource]

Zuriah , Zakaria (2007) Pencengkam Robot Berbentuk Silinder. Project Report. UTeM, Melaka, Malaysia. (Submitted)

This list was generated on Sun Sep 24 15:59:42 2017 MYT.