Items where Division is "Faculty of Mechanical and Manufacturing Engineering Technology" and Year is 2019

Article

Ab Wahab, Norfariza and Basharudin, Shiradzi and Md Nasir, Nur Syuhada and Ruslan, Eliyana and Abdul Hadi, Dayanasari and Boejang, Hambali (2019) Optimization of square shape portable vacuum clamping (Square) based on machining parameter. ARPN Journal Of Engineering And Applied Sciences, 14 (13). pp. 2433-2436. ISSN 1819-6608

Ab Wahab, Norfariza and Mohd Azmi, Siti Haidar Atiah and Nordin, Abd Khahar and Abdul Hadi, Dayanasari and Johari, Siti Halma and Mohd Najib, Suhaila (2019) Development And Analyzation Of Linear Positioning Table For Drilling Machine. ARPN Journal of Engineering and Applied Sciences, 14 (3). pp. 743-749. ISSN 1819-6608

Ab Wahab, Norfariza and Wan Idrus, Syed Ahmad Sharif and Nordin, Abd Khahar (2019) Analysis Of High Speed Shear Slitting Machine Based On Cutting Force, Temperature And Cutting Speed. ARPN Journal of Engineering and Applied Sciences, 14 (11). pp. 2106-2110. ISSN 1819-6608

Abdul Rasib, Amir Hamzah and Abdullah, Rohana and Ebrahim, Zuhriah and Mohamad Rafaai, Zubaidi Faiesal (2019) Improvement of overall equipment effectiveness through application of single-minute exchange of die in automotive manufacturing. TEST Engineering And Management, 81. pp. 3650-3659. ISSN 0193-4120

Abdul Rasib, Amir Hamzah and Ebrahim, Zuhriah and Muhamad, Mohd Razali (2019) Deployment Of Gross Profit Loss For Attenuating Time Loss Impact In Automotive Industries. International Journal Of Scientific & Technology Research, 8 (12). pp. 2208-2212. ISSN 2277-8616

Abdullah, Muhammad Ilman Hakimi Chua and Othman, Aimanezmir and Abdullah, Rohana and Abdollah, Mohd Fadzli bin (2019) Optimization On The Nanoparticles Stability In Liquid Phased Condition By Using Taguchi Analysis. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 61 (1). pp. 129-139. ISSN 2289-7879

Ahmad, Mohd Nazri and Ab Rahman, Mohd Hidayat and Osman, Mohd Hairizal and Wahid, Mohammad Khalid and Maidin, Nurul Ain and Mohd Basir, Mohamad Faris (2019) Shrinkage Effect Of Vacuum Casting Process Parameters Using Taguchi Method. International Journal of Integrated Engineering, 11 (3). pp. 248-254. ISSN 2229-838X

Ahmad, Mohd Nazri and Osman, Mohd Hairizal and Jumaidin, Ridhwan and Abu Hassan, Muhammad Afiq and Wahid, Mohammad Khalid and Maidin, Nurul Ain and Ab Rahman, Mohd Hidayat (2019) Flow Analysis Of Five-Axis Impeller In Vacuum Casting By Computer Simulation. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 61 (2). pp. 181-189. ISSN 2289-7879

Ahmad, Mohd Nazri and Wahid, Mohammad Khalid and Maidin, Nurul Ain and Ab Rahman, Mohd Hidayat and Osman, Mohd Hairizal and Alis@Elias, Izzati Fatin (2019) A Complete Denture By Rapid Prototyping With Reverse Engineering Approach. International Journal of Mechanical and Mechatronics Engineering, 19 (3). pp. 50-57. ISSN 2227-2771

Azmi, Ezzatul Farhain and Hussin, Nor Hafizah and Syed Ahmad, Sharifah Sakinah and Mohd Said, Rahaini and Samsudin, Adam (2019) Assessment Of Aboveground Biomass And Temperature In The Tropical Rainforest Of Malaysia. International Journal of Innovative Technology and Exploring Engineering, 8 (12). pp. 1888-1891. ISSN 2278-3075

Azmi, Ezzatul Farhain and Ishak, Muhammad Firdaus and Samsudin, Adam and Zainal Abidin, Amar Faiz and Kadiran, Kamaru Adzha (2019) E-Water Level: Educational Kit For Testing Student Knowledge On Transient Response Using Water Level Control. International Journal of Innovative Technology and Exploring Engineering, 8 (12). pp. 4851-4856. ISSN 2278-3075

Boejang, Hambali and Arep @ Ariff, Hambali and Hassan, Muhammad Zahir and Esa, Saharudin (2019) Dealing with project characteristics through concurrent product development by Malaysian car producer. International Journal of Emerging Trends in Engineering Research, 7 (12). pp. 784-789. ISSN 2347-3983

Ghazali, Mariyam Jameelah and Yusuf, Yusliza and Abdollah, Mohd Fadzli bin and Otsuka, Yuichi and Morakul, Sarita and Nakamura, Susumu and Ohnuma, Kiyoshi (2019) Wettability characteristics of laser surface textured plasma sprayed TiO2/ZnO coatings. Tribology Online, 14 (5). pp. 279-284. ISSN 1881-2198

Hussin, Mohamed Saiful Firdaus and Mohd Yassim, Halyani and Zakaria, Azrul Abidin and Jumaidin, Ridhwan and Mansor, Muhd Ridzuan and Mohammad Taha, Mastura (2019) Fully Automatic Solar Powered Oil-Water Separation System For Grease Trap Controlled By Arduino: A Conceptual Design. International Journal of Recent Technology and Engineering, 8 (4). pp. 1266-1271. ISSN 2277-3878

Hussin, Mohamed Saiful Firdaus and Omar, Mohammad Rafi and Azlan, Khairul Azri and Azahar, Arman Hadi and Ismail, Zulkefli and Rosli, Fatin Farhana (2019) Orthopedic Calf Cast Using Antioxidative FS3200PA Nylon 3D Printing: Design And Optimization. ARPN Journal of Engineering and Applied Sciences, 14 (23). pp. 4093-4096. ISSN 1819-6608

Idris, Norain and Saadon, Intan Mastura and Mohd Azize, Aziean and Zakaria, Muhammad Zulfattah (2019) Electrical production cost of young coconut waste pellet by using mini pellet mill - A feasibility study. Indonesian Journal of Electrical Engineering and Computer Science, 18 (2). pp. 599-606. ISSN 2502-4752

Ifayefunmi, Olawale and Wang, Sheng Hue and Mahidan, Fairuz Mardhiah (2019) Buckling Of Cones With Imperfect Length Subjected To Axial Compression. International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), 9 (4). pp. 219-228. ISSN 2249-6890

Ilyas, R.A. and Sapuan, S.M. and Ibrahim, Rushdan and Jumaidin, Ridhwan and Abral, Hairul and Ishak, M. R and Zainudin, Edi Syams and Mahmud, Siti Nur Atikah and Mohd Nurazzi, Norizan and A., Atiqah and Ansari, M.N.M. and Syafri, Edi and Asrof, Mochamad and Nasmi, Herlina Sari (2019) Effect Of Sugar Palm Nanofibrillated Cellulose Concentrations On Morphological, Mechanical And Physical Properties Of Biodegradable Films Based On Agro-Waste Sugar Palm (Arenga Pinnata (Wurmb.) Merr) Starch. Journal Of Materials Research And Technology, 8 (5). pp. 4819-4830. ISSN 2238-7854

Ishak, Anuar and Waini, Iskandar and Pop, Ioan Mihai (2019) On The Stability Of The Flow And Heat Transfer Over A Moving Thin Needle With Prescribed Surface Heat Flux. Chinese Journal of Physics, 60. pp. 651-658. ISSN 0577-9073

Jumaidin, Ridhwan and Ab Rahman, Mohd Hidayat and Ahmad, Mohd Nazri and Wahi, Mohammad Khalid and Yaakob, Mohd Yuhazri and Maidin, Nurul Ain and Osman, Mohd Hairizal and Sutan Saidi, Zulhelmi Asyul and Ahmad Ilyas, Rushdan (2019) Characteristics Of Cogon Grass Fibre Reinforced Thermoplastic Cassava Starch Biocomposite: Water Absorption And Physical Properties. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 62 (1). pp. 43-52. ISSN 2289-7879

Jumaidin, Ridhwan and Abdullah, Muhammad Ilman Hakimi Chua and Jopri, Iffa Marina and Hussin, Mohamed Saiful Firdaus and Hasan, Rafidah and Saleman, Abdul Rafeq and Idral, Febrian and Aziz, Alia Ruzana (2019) Effect Of Cooling Medium And Tempering On Microstructures And Hardness Of SK3 High Carbon Steel. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 63 (2). pp. 199-209. ISSN 2289-7879

Jumaidin, Ridhwan and Adam, Nur Wardah and Azlan, Umar Al-Amani and Hussin, Mohamed Saiful Firdaus and Mohammad Taha, Mastura and Mansor, Muhd Ridzuan and Yob, Mohd Shukri and Ahmad Ilyas, Rushdan (2019) Water Transport And Physical Properties Of Sugarcane Bagasse Fibre Reinforced Thermoplastic Potato Starch Biocomposite. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 61 (2). pp. 273-281. ISSN 2289-7879

Khashi'ie, Najiyah Safwa and Md Arifin, Norihan and Wahi, Nadihah and Nazar Mohd, Roslinda and Hafidzuddin, Ezad Hafidz and Pop, Ioan Mihai (2019) A Stability Analysis For Magnetohydrodynamics Stagnation Point Flow With Zero Nanoparticles Flux Condition And Anisotropic Slip. Energies, 12 (7). 01-19. ISSN 1996-1073

Khashi’ie, Najiyah Safwa and Md Arifin, Norihan and Hafidzuddin, Ezad Hafidz and Wahi, Nadihah (2019) MHD Mixed Convective Stagnation Point Flow With Heat Generation Past A Shrinking Sheet. ASM Science Journal, 12 (SI1). pp. 71-81. ISSN 1823-6782

Khashi’ie, Najiyah Safwa and Md Arifin, Norihan and Hafidzuddin, Ezad Hafidz and Wahi, Nadihah (2019) Thermally Stratified Flow Of Cu-Al2O3/Water Hybrid Nanofluid Past A Permeable Stretching/Shrinking Circular Cylinder. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 63 (1). pp. 154-163. ISSN 2289-7879

Khashi’ie, Najiyah Safwa and Md Arifin, Norihan and Hafidzuddin, Ezad Hafidz and Wahi, Nadihah and Ilias, Mohd Rijal (2019) Magnetohydrodynamics (MHD) Flow And Heat Transfer Of A Doubly Stratified Nanofluid Using Cattaneo-Christov Model. Universal Journal of Mechanical Engineering, 7 (4). pp. 206-214. ISSN 2332-3361

Khashi’ie, Najiyah Safwa and Md Arifin, Norihan and Hafidzuddin, Ezad Hafidz and Wahi, Nadihah and Pop, Ioan Mihai (2019) Mixed Convective Stagnation Point Flow Of A Thermally Stratified Hybrid CU-AL2O3/Water Nanofluid Over A Permeable Stretching/Shrinking Sheet. ASM Science Journal, 12 (SI5). pp. 17-25. ISSN 1823-6782

Lau, Kok Tee and Kok, Hoi Ern and Ab Maulod, Hairul Effendy and Abdul Latiff, Nurizzatul Zahirah and Abdul Aziz, Aida Nazifa and Rosli, Nur Hazirah (2019) Effect Of Laminating Press’s Opening-Stacking Position On Adhesive Thickness In Coverlay/Adhesive/Flexible-Printed-Circuit Sheet. Journal Of Engineering Technology And Applied Physics, 1 (1). pp. 1-3. ISSN 2682-8383

Maidin, Nurul Ain and Ab Rahman, Mohd Hidayat and Ahmad, Mohd Nazri and Osman, Mohd Hairizal and Wahid, Mohammad Khalid and Mazlan, Siti Nur Humaira and Abdul Latiff, Muhammad (2019) Airco Wind Turbine Prototype Design And Development. International Journal of Recent Technology and Engineering, 8 (1S5). pp. 79-85. ISSN 2277-3878

Md Arifin, Norihan and Khashi'Ie, Najiyah Safwa and Wahi, Nadihah and Mohd Nazar, Roslinda and Hafidzuddin, Ezad Hafidz and Pop, Ioan Mihai (2019) Mixed Convective Flow And Heat Transfer Of A Dual Stratified Micropolar Fluid Induced By A Permeable Stretching/Shrinking Sheet. Entropy, 21 (12). 01-16. ISSN 1099-4300

Md Arifin, Norihan and Khashi'ie, Najiyah Safwa and Hafidzuddin, Ezad Hafidz and Wahi, Nadihah (2019) Dual Stratified Nanofluid Flow Past A Permeable Shrinking/Stretching Sheet Using A Non-Fourier Energy Model. Applied Sciences, 9 (10). 01-21. ISSN 2076-3417

Mohammad Taha, Mastura and Mansor, Muhd Ridzuan and Mohd Farhan Han, Syaza Najwa (2019) Thermal And Melt Flow Behaviour Of Kenaf Fibre Reinforced Acrylonitrile Butadiene Styrene Composites For Fused Filament Fabrication. Defence S and T Technical Bulletin, 12 (2). pp. 238-246. ISSN 1985-6571

Mohd Sapuan, Salit and Ilyas, Rushdan Ahmad and Jumaidin, Ridhwan and Shaharuzaman, Mohd Adrinata and Ibrahim, Rushdan and Abral, Hairul and Ishak, M.R. and Zainudin, E.S. and Asrofi, Mochamad and Mahmud, Siti Nur Atikah and Muhammad Huzaifah, Muhammad Roslim and Mohd Radzi, Ali and Noor Azammi, Abdul Murat and Mohd Nurazzi, Norizan and Syafri, Edi and Herlina Sari, Nasmi and Norrrahim, Mohd Nor Faiz (2019) Sugar Palm (Arenga Pinnata (Wurmb.) Merr) Cellulosic Fibre Hierarchy: A Comprehensive Approach From Macro To Nano Scale. Journal of Materials Research and Technology, 8 (3). pp. 2753-2766. ISSN 2238-7854

Mohd Sapuan, Salit and Mohammad Taha, Mastura and Muhammad, Noryani and Moh Zuhri, Mohd Yusoff and Zainudin, Edi Syams (2019) Material Selection Of Natural Fibre Using A Stepwise Regression Model With Error Analysis. Journal of Materials Research and Technology, 8 (3). pp. 2865-2879. ISSN 2238-7854

Muhamad Damanhuri, Amir Abdullah and Hariri, Azian and Alkahari, Mohd Rizal and Md Fauadi, Muhammad Hafidz Fazli and Zainal Bakri, Siti Farhana (2019) Indoor Air Concentration From Selective Laser Sintering 3D Printer Using Virgin Polyamide Nylon (PA12) Powder: A Pilot Study. International Journal of Integrated Engineering, 11 (5). pp. 140-149. ISSN 2229-838X

Muhamad Damanhuri, Amir Abdullah and Omar, Mohammad Rafi and Hariri, Azian and Md Fauadi, Muhammad Hafidz Fazli and Alkahari, Mohd Rizal (2019) Emission Of Selected Environmental Exposure From Selective Laser Sintering (SLS) Polyamide Nylon (PA12) 3D Printing Process. Journal of Safety, Health and Ergonomics, 1 (1). pp. 1-6. ISSN 2682-745X

Nik Long, Nik Mohd Asri and Hamzah, Khairum and Senu, Norazak and Eshkuvatov, Zainiddin K. (2019) Interaction between two inclined cracks in bonded dissimilar materials. ASM Science Journal, 12 (6). pp. 167-173. ISSN 1823-6782

Nik Long, Nik Mohd Asri and Hamzah, Khairum and Senu, Norazak and Eshkuvatov, Zainiddin K. (2019) Stress intensity factor for a thermally insulated crack in bonded dissimilar materials. ASM Science Journal, 12 (5). pp. 98-106. ISSN 1823-6782

Nik Long, Nik Mohd Asri and Hamzah, Khairum and Senu, Norazak and Eshkuvatov, Zainiddin K. and Ilias, Mohd Rijal (2019) Stress intensity factors for a crack in bonded dissimilar materials subjected to various stresses. Universal Journal of Mechanical Engineering, 7 (4). pp. 172-182. ISSN 2332-3353

Nik Long, Nik Mohd Asri and Senu, Norazak and Hamzah, Khairum and Eshkuvatov, Zainiddin K. (2019) Stress intensity factor for multiple cracks in bonded dissimilar materials using hypersingular integral equations. Applied Mathematical Modelling, 73. pp. 95-108. ISSN 0307-904X

Nirmal, Umar and Koh, B. X. and Yaakob, Mohd Yuhazri (2019) Developments on baby strollers over the last decade. Current Journal of Applied Science and Technology, 33 (6). pp. 1-25. ISSN 2457-1024

Nordin, Abdul Khahar and Ab Wahab, Norfariza and Sebastian, Teresa Senatia (2019) Design And Development Of Waterjet Clamping Based On Machining Performance. ARPN Journal of Engineering and Applied Sciences, 14 (12). pp. 2315-2319. ISSN 1819-6608

Pop, Ioan Mihai and Waini, Iskandar and Ishak, Anuar (2019) Flow And Heat Transfer Along A Permeable Stretching/Shrinking Curved Surface In A Hybrid Nanofluid. Physica Scripta, 94 (10). pp. 1-13. ISSN 0031-8949

Pop, Ioan Mihai and Waini, Iskandar and Ishak, Anuar (2019) Unsteady Flow And Heat Transfer Past A Stretching/Shrinking Sheet In A Hybrid Nanofluid. International Journal of Heat and Mass Transfer, 136. pp. 288-297. ISSN 0017-9310

Salit, Mohd Sapuan and Mahmud, Siti Nur Atikah and Rushdan, Ahmad Ilyas and Zainudin, Edi Syams and Ishak, Mohamad Ridzwan and Ibrahim, Rushdan and A., Atiqah and Mohamed Nainar, Mohamed Ansari and Jumaidin, Ridhwan (2019) Degradation And Physical Properties Of Sugar Palm Starch/ Sugar Palm Nanofibrillated Cellulose Bionanocomposite. Polimery/Polymers, 64 (10). pp. 680-689. ISSN 0032-2725

Salit, Mohd Sapuan and Mustafa, Nuzaimah and Jawaid, Mohamed and Razali, Nadlene (2019) Microstructure And Mechanical Properties Of Unsaturated Polyester Composites Filled With Waste Rubber Glove Crumbs. Fibers and Polymers, 20 (6). pp. 1290-1300. ISSN 1229-9197

Salit, Mohd. Sapuan and H. N., Salwa and Mohammad Taha, Mastura and M. Y. M., Zuhri (2019) Analytic Hierarchy Process (AHP)-Based Materials Selection System For Natural Fiber As Reinforcement In Biopolymer Composites For Food Packaging. Bioresources, 14 (4). pp. 10014-10046. ISSN 1930-2126

Salleh, Mohd Shukor and Hashim, Hanizam and Yahaya, Saifudin Hafiz and Nurhadi, Siswanto (2019) Effect Of Magnesium Surfactant On Wettability Of Carbon Nanotube In A356 Alloy Composite. Journal of Advanced Manufacturing Technology (JAMT), 13 (2). pp. 33-44. ISSN 1985-3157

Wahid, Mohammad Khalid and Ahmad, Mohd Nazri and Osman, Mohd Hairizal and Maidin, Nurul Ain and Ab Rahman, Mohd Hidayat and Hussin, Mohamed Saiful Firdaus and Kasno, Mohammad `Afif (2019) Development Of Biodegradable Plastics For Packaging Using Wastes From Oil Palm And Sugar Cane. International Journal Of Recent Technology And Engineering (IJRTE), 8 (1S5). pp. 75-78. ISSN 2277-3878

Waini, Iskandar and Ishak, Anuar and Pop, Ioan Mihai (2019) Hybrid Nanofluid Flow And Heat Transfer Over A Nonlinear Permeable Stretching/Shrinking Surface. International Journal of Numerical Methods for Heat and Fluid Flow, 29 (9). pp. 3110-3127. ISSN 0961-5539

Waini, Iskandar and Ishak, Anuar and Pop, Ioan Mihai (2019) Hybrid Nanofluid Flow And Heat Transfer Past A Vertical Thin Needle With Prescribed Surface Heat Flux. International Journal of Numerical Methods for Heat and Fluid Flow, 29 (12). pp. 4875-4894. ISSN 0961-5539

Yaakob, Mohd Yuhazri and Amir Mohamed, Kamarul and Ang, Siew Khim and Lye, Michelle Chuok Fang and Abdullah, Abu and Husin, Mohd Amirhafizan and Sihombing, Haeryip (2019) Effect Of Stitching Patterns On Tensile Strength Of Kenaf Woven Fabric Composites. International Journal of Integrated Engineering, 11 (6). pp. 70-79. ISSN 2229-838X

Yaakob, Mohd Yuhazri and Balkrishnan, Paramananthan and Husin, Mohd Amirhafizan and Sihombing, Haeryip (2019) Coconut Fiber Panel Towards Acoustical Performance. International Journal of Mechanical and Mechatronics Engineering, 19 (2). pp. 11-24. ISSN 2227-2771

Yaakob, Mohd Yuhazri and Husin, Mohd Amirhafizan and Abdullah, Zailinda and H., Sihombing and S.T.W., Lau (2019) Effects Of Different Processes On Mechanical Properties Of CFRP By RTM And VIP Techniques. International Journal of Mechanical & Mechatronics Engineering, 19 (5). pp. 75-80. ISSN 2077-124X

Yaakob, Mohd Yuhazri and Salleh, Mohd Rizal and Wan Nor Azman, Wan Ainul Syafika and Amir Mohamed, Kamarul and Salahudin, Mohamad Tahkim and Haery, Sihombing (2019) Physiognomic Characteristics Towards MPV Car Design In Kansei Engineering. International Journal of Advanced Trends in Computer Science and Engineering, 8 (1.3). pp. 224-229. ISSN 2278-3091

Zainal Bakri, Siti Farhana and Hariri, Azian and Ismail, Marzuki and Muhamad Damanhuri, Amir Abdullah (2019) Evaluation Of Industrial Workplace Exposure To Metal Fumes Using Toenail As Bio-Indicator. International Journal of Integrated Engineering, 11 (5). pp. 133-139. ISSN 2229-838X