Browse By Repository:

 
 
 
   

Items where Subject is "T Technology > TP Chemical technology"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Authors | Item Type
Jump to: | A | B | C | D | E | F | H | I | J | K | L | M | N | O | R | S | T | U | W | Y | Z
Number of items at this level: 297.

Abal Abas, Zuraida (2013) Extended Advancing Front Technique for the Initial Triangular Mesh Construction on a Single Coil for Radiative Heat Transfer. Arabian Journal for Science and Engineering. pp. 1-18. ISSN 13198025

Siti Hajar , Abd Rahman (2008) A Study On Hardness Of Porcelain Body Sintered At Various Temperatures. Project Report. UTeM, Melaka, Malaysia. (Submitted)

A

Ab Razak, Muhammad Nur Asyraf (2016) Effect Of Oil Palm Trunk (OPT) And Oil Palm Frond (OPF) Fiber To Physical And Mechanical Properties Of Polyurethane (PU). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abbdul Faiz, Anuar (2013) Effect Of Injection Machine Parameters On The Warpage Of Dumbbell Injection Mould. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Manaf, Mohd Edeerozey (2013) Optical Properties of Cellulose Esters and Applications to Optical Functional Films. In: Pulp production and processing: From papermaking to high-tech products. Smithers Rapra Technology Ltd, United Kingdom, pp. 391-411. ISBN 978-1-84735-633-8

Abd Rahman, Nadia Adriena (2016) Effect Of Injection Moulding Parameters On Material Characteristic Of Two Plate Mould With Different Material Using Flow Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Rasid, Jaafar (2009) Study And Analysis The Effectiveness CAD-CAM System In Mold Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Yazid, Nurul Shuhadah (2016) Effect Of Poly Vinyl Alcohol (PVA) On The Size Of Linseed Oil (LO) Microcapsule Self-Healing Coating. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Basit , Kamaludin (2013) Pembentukan mendapan bahan bakar diesel dan bio-diesel pada suhu permukaan melebihi suhu Kadar Pengewapan Maksimum (MEP). Project Report. UTeM, Melaka. (Submitted)

Abdul Fattah , Mohd Tahir (2008) Effect Of Air Arrangement On Wood Combustion Through CFD. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Hafiz , Hashim (2013) To determine alkaline catalyst for the jatropha oil biodiesel production. Project Report. UTeM, Melaka. (Submitted)

Abdul Hamid, Nor Nadiah (2016) Preparation And Characterization Of Natural Rubberchitson Biodegradable Urea For Slow Release Fertilizer. Masters thesis, Universiti Teknikal Malaysia Melaka.

Abdul Rahman , Mat Rejab (2010) Develop Heating System Using By Visual Basic. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Razak, Ahmad Tarmizi (2009) Kajian Terhadap Kekuatan Rekabentuk Tangki Gas Petroleum Cecair (LPG). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Razak, Muhammad Asyraf (2016) Leftover Rice Starch From Food Waste To Bio-Based Plastic. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Wahab, Muhamad Hafiz (2016) Automation Deflashing System For Blow Moulded Product. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdull Hanif , Abdull Rahman (2013) Microstructural Study On Different Type Of Biodiesel Fuel For Automotive. Project Report. UTeM, Melaka. (Submitted)

Abdullah, Asma Nor Hidayah (2016) Systematic Development Of Injection Mold : A Convocation Souvenir. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abu Bakar, Mohamaad Syafiq (2016) Automation Deflasher Mechanism For Blow Moulded Product. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Agus Setyo, Budi and Safarudin Gazali, Herawan and Mohd. Nizam, Ayob and Asmala , Ahmad and KT, Lau (2006) Investigation Of The Structure And Properties Of Phosphate Based Glasses. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad, Mohd Azhar and Herawan, Safarudin Gazali and Yusof, Ahmad Anas (2013) Effect of Activation Time on the Pinang Frond Based Activated Carbon for Remazol Brilliant Blue R Removal. In: Malaysian Technical Universities Conference on Engineering and Technology (MUCET 2013), 3 - 4 December 2013, MS Garden Hotel, Kuantan, Pahang..

Ahmad, Mohd Azhar and Herawan, Safarudin Gazali and Yusof, Ahmad Anas (2014) Effect of activation time on the pinang frond based activated carbon for remazol brilliant blue r removal. Journal of Mechanical Engineering and Sciences (JMES) , 7. pp. 1085-1093. ISSN 2231-8380

Ahmad, Mohd Azhar and Herawan, Safarudin Gazali and Yusof, Ahmad Anas (2014) Equilibrium, kinetics, and thermodynamics of remazol brilliant blue R dye adsorption onto activated carbon prepared from pinang frond. ISRN Mechanical Engineering, 2014. pp. 1-7. ISSN 2356-7872

Ahmad Faizol, Ismail (2009) Comparison Of Two And Three Plate Molds Plastic Injection Molding For Mold Design Selection. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Farid, Zaini (2015) Effect Of Surface Roughness On Tribological Properties Of PKAC-E Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Fariz, Faizal Lim (2008) The Study Of Optimum Condition To Produce Rubber Induced Polymer (Polyethylene). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Lutfi , Dahari (2013) Menilai prestasi enjin diesel menggunakan campuran minyak sayuran dengan diesel sebagai bahan api. Project Report. UTeM, Melaka. (Submitted)

Ahmad Razli, Mohd Faez (2016) Gas Leakage Monitoring Over The Net With Raspberry PI. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Sufi, Abdullah (2008) Brikueting Panas Habuk Kayu. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Al-Nasrawi, Hayder Saad Oleiwi (2016) Tribological Studies Of Bio-Lubricant Under High Loading Capacity. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ali, Muhammad Syahir (2016) Pre Chamber For Performance Improvement Using Compressed Natural Gas In Single Cylinder Engine. Masters thesis, Universiti Teknikal Malaysia Melaka.

Alif Zulfakar , Pokaad (2008) Kecekapan Haba Ekzos Dan Penggunaan Bahan Api Tentu Brek (BSFC) Enjin Diesel Dengan Bahan Api Biodiesel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Alkahari, Mohd Rizal and Furumoto, Tatsuaki and Ueda, Takashi and Hosokawa, Akira (2014) Consolidation Characteristics Of Ferrous-Based Metal Powder In Additive Manufacturing. Journal Of Advanced Mechanical Design, Systems, And Manufacturing, 8 (1). pp. 1-16. ISSN 1881-3054

Amira Khalida, Mohd Nasir (2015) Methane Production From Co Digestion Of Chicken Manure With Agricultural Waste. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amiruddin , Shahipurullah (2013) Investigation Of Extracting Oil From Waste Palm Fruit Fibre. Project Report. UTeM, Melaka. (Submitted)

Amirul Asyraf, Mat Nasir (2013) Preparation And Characterization Of Green Rubber Foam From Reclaimed Rubber Glove. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amirullah , Amran (2013) Bahan api pepejal daripada sisa bahan buangan industri minyak kelapa sawit. Project Report. UTeM, Melaka. (Submitted)

Anas, Azmi (2008) Rekabentuk Mixer Untuk Kenderaan Berkuasa Gas. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Asriana , Ibrahim (2012) A study of vegetale oils performance as a helical gear lubricant. Other thesis, UTeM.

Azhari, Muhamad Azwar and Omar, Nooririnah and Mustaffa , Nuzaimah (2014) Carbon Dioxide Permeation Characteristics in Asymmetric Polysulfone Hollow Fiber Membrane: Effect of Constant Heating and Progressive Heating. Advanced Materials Research Journal, 896. pp. 37-40. ISSN 10.4028

Azhari, Muhamad Azwar and Arith, Faiz and Ali, Nurfadzillah and Rodzi, Shekin and A. Karim, Nor Khalilah (2015) Fabrication Of Low Cost Sensitized Solar Cell Using Natural Plant Pigment DYES. ARPN Jurnal Of Engineering And Applied Science, 10 (16). 7092 - 7096. ISSN 1819-6608

Azhari, Muhamad Azwar and Fathe’li, Muhammad Asyraf and Aziz, Nur Syawal Aidill and Mohd Nadzri, Muhammad Syahir and Yusuf, Yusliza (2015) A Review On Addition Of Zinc Dialkyldithiophosphate In Vegetable Oil As Physical Properties Improver. ARPN Journal Of Engineering And Applied Sciences, 10 (15). pp. 6496-6500. ISSN 1819-6608

Azhari, Muhamad Azwar and Tamar, Muhamad Faisal and Mat Nuri, Nur Rashid and Yusoff, Mohd Rahimi (2015) Physical Property Modification Of Vegetable Oil As Biolubricant Using ZDDP. ARPN Journal Of Engineering And Applied Sciences, 10 (15). 6525 - 6528. ISSN 1819-6608

Azril Shafizam, Mohamad (2015) Experimental Investigation Of Engine Performance And Emission For Biodiesel At Various Storage Condition. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azrin , Mohamad Effandy (2007) The Improvement And Fabrication Of New Breather Valve For Oil And Gas Industry. Project Report. Melaka, Malaysia, UTeM. (Submitted)

B

Bagas, Wardono (2009) Advance Machining of Industrial Graphite Electrodes. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Bakar, N. and M.Hatta, N. and Shahbodin, F. (2012) 3D Approach in the Development of Chemistry Subject at UTeM: Atom Cubic. Malaysian Journal of Educational Technology, 12 (4). pp. 1-4. ISSN 1675 0292

Bakar, N. and Badioze Zaman, H. (2010) Pengujian Makmal Maya Kimia Berasaskan Pendekatan Kognitivisme, Konstruktivisme dan Konteksual. Jurnal Teknologi Maklumat dan Multimedia, 8. pp. 35-49. ISSN 1823-0113

Bakar, N. and Badioze Zaman, H. and Shahbodin, F. (2007) Development of VLAB-CHEM for form four student based on constructivism-cognitivism-contectual approach. Journal of Technology Management and Entrepreneurship, 6 (1). pp. 75-96. ISSN 1675-8404

Bok , Chiew Loon (2010) Emission Characteristic Of Alkaline-Catalysts Biodiesel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

C

Chai, Jiuan Hua (2008) Design And Development Of Plastic Injection Mould With Concurrent Engineering. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chew, Choy Wen (2014) A Study Of Consumer Perception On Nanotechnology In Cosmetic Products In Melaka. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chin, Kat Meng (2008) Design Validation And Development Of Plastic Injection Mould Cavity For Plastic Container Product. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chin, Sin Yi (2015) A Portable Embedded Gas Leakage Detection Device. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chin , Su Fok (2007) Degradation Behavior Of PVC-LDPE Blend. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Chon, Yu Yun (2016) Preparation And Characterization Of Nano-Alumina Filled HDPE Conducting Polymer Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

D

Dalila, Nizam (2009) Membangunkan Sistem Larut Lesap Untuk Nata De Coco. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Dhar malingam, Sivakumar and Subramaniam, Kathiravan and Selamat, Mohd Zulkefli and Said, Md Radzai and Subramonian, Sivarao (2016) A Study On Impact Behaviour Of A Novel Oil Palm Fibre Reinforced Metal Laminate System. ARPN Journal Of Engineering And Applied Sciences, 11. pp. 2483-2488. ISSN 1819-6608

E

Eric, Jau Jeffrey (2012) Performance Of A Condenser With Cooper Oxide (II) Nanoparticles Suspended Into Host Refrigerant. Project Report. UTeM, Melaka, Malaysia. (Submitted)

F

Fadhli, Harun (2015) Parametric Study Of Biodiesel Blend Of Different Ratio (B70, B80 And B90). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fadhlizil Fariz, Md Saad (2009) The Design And Development Of Warning Device For Low Pressure LPG Tank. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fadrah Hanim, Ad Suhadak (2015) Transesterification Of Used Frying Oil And Optimization For Biodiesel Production. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Faizal , Zainol (2007) Gage Capability Study of Thin Film Coating Roughness Measurement Method Using Profilometer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Farhana, Masron (2012) The Mechanical Properties Of Polypropylene/Polylactic Acid (PP-PLA) Polymer Blends. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Faris, Azman (2015) Parametric Study Of Biodiesel Properties To The Storage Condition. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fatimah, Misran (2015) The Effects Of Alumina On The Dense Calcium Phosphate Synthesized From Eggshell Waste. Masters thesis, Universiti Teknikal Malaysia Melaka.

Fatin Afiqah, Johari (2015) Prestasi Dan Emisi Enjin Diesel Menggunakan Minyak Masak Terpakai Pra-Pemanasan Sebagai Bahan Api. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fatin Nabilah, Rosly (2013) Design And Analysis Of Polypropylene Plastic Name Card Holder. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Firdaus Fadzilah, Husani (2008) Design And Fabrication Of Street Light Using Modern Product Development Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Firdaus Hakimi, Hassan (2010) Determination Of The Optimum Design Parameters For A Family Mould. Project Report. UTeM, Melaka, Malaysia. (Submitted)

H

Habeeb, Hiyam Adil (2016) Study On The Mechanical Properties Of Natural PLA And PLA Composites Fabricated By 3D Printing. Masters thesis, Universiti Teknikal Malaysia Melaka.

Hamsani, Nurul Fatiehah (2016) Innovative Packaging Design To Enhance The Performance Toward Global Market At Bumiputra SME's Food Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hanis , Hasnul (2007) Rekabentuk Sistem Pembungkusan Untuk Menghasilkan Produk Nata De Coco. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Harlina, Ngah (2009) Study Of The Thermal Properties Of Chitosan Film. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hasrul, 'Nisham Rosly (2013) Mechanical characterization of mems piezoresistive microcantilever sensor for biosensing application (design and simulation). Masters thesis, UKM.

Hazalifah , Zainal Abidin (2013) Tribological properties of waste vegetable oil biodiesel using-alkaline-based potassium hydroxide (KOH) catalyst. Project Report. UTeM, Melaka. (Submitted)

Hazlina, Razali (2014) Determining Optimal Process Mean For Small And Medium Juice Processing Industries Using Markovian Model. Masters thesis, Universiti Teknikal Malaysia Melaka.

Hazwani, Hilmi (2013) Effect Of Mixing Ratio On The Mechanical Properties Of Polypropylene Composite. Project Report. UTeM, Melaka. (Submitted)

Herawan, Safarudin Gazali (2003) Carbon molecular sieves from oil palm shell for separation of methane from carbon dioxide gas mixture. In: Engineering and Technology Conference 2003 (EnTech 2003), 30 July - 1 August 2003, Kucing, Serawak.

Herawan, Safarudin Gazali (2000) MICROPOROUS CARBON ADSORBENTS FROM OIL PALM SHELLS FOR GAS SEPARATION. In: ”. The 3rd Asia Pacific Conference on Sustainable Energy and Environment Technologies, 3 - 6 December 2000, Hongkong.

Herawan, Safarudin Gazali (2000) PROCESSING MICROPOROUS CARBON ADSORBENTS BY PHYSICAL AND CHEMICAL TREATMENTS FOR GAS SEPARATION. In: SOMCHE 2000, 30 - 31 October 2000, Kuala Lumpur.

Herawan, Safarudin Gazali (2000) REMOVAL OF CARBON DIOXIDE BY MICROPOROUS CARBON ADSORBENTS FROM OIL PALM SHELLS. In: AMER 2000, 4 - 5 October 2000, Shah Alam.

Herawan, Safarudin Gazali (2003) THERMOGRAVIMETRY ANALYSIS FOR DETERMINING THE ADSORPTION SELECTIVITY OF CARBON MOLECULAR SIEVE FROM OIL PALM SHELL. In: The 3rd International Conference on Advances in Strategic Technologies, 12 - 14 August 2003, Kuala Lumpur.

Herawan, Safarudin Gazali (2003) UTILIZATION OF OIL PALM SHELL BY CONVERTED TO CARBON MOLECULAR SIEVE FOR SEPARATION OF METHANE FROM CARBON DIOXIDE AS A WASTE MINIMIZATION. In: Environment 2003, 18 - 19 February 2003, Pulau Penang, Malaysia.

Herawan, Safarudin Gazali and Ayob, Md Razali (2009) Characteristic of Different Precursor Size of Activated Carbon Produced From Oil Palm Shell in Adsorption of LPG. In: International Conference on Applications and Design in Mechanical Engineering (ICADME), 11 - 13 October 2009, Pulau Penang, Malaysia.

Herawan, Safarudin Gazali and Ayob, Md Razali (2009) Effect of different carbonization of activated carbon produced from oil palm shell in adsorption of Liquefied Petroleum Gas (LPG). In: International Conference of Sustainable Energy (ICSE 2009), 16 - 17 June 2009, Bandung, Indonesia.

Herawan, Safarudin Gazali and Ayob, Md Razali (2009) Effect of pyrolysis temperature on pore development of oil palm-shell activated carbons. In: International Conference and Exhibition on Science and Technology in Biomass Production (ICEBP) 2009, 25 - 26 November 2009, Bandung, Indonesia.

Herawan, Safarudin Gazali and Ayob, Md Razali and Putra, Azma (2013) Characterization of activated carbons from Oil-palm-shell by CO2 activation with no holding carbonization temperature. The Scientific World Journal, 2013 ( (Articl). pp. 1-6. ISSN 1537-744X (Online)

Herawan, Safarudin Gazali and Mohamad, Imran Syakir and Mohd Husin, Mohd Haizal and Yusof, Ahmad Anas (2005) THE EFFECT OF ACTIVATION IN CARBON ADSORBENT ON ADSORPTION AND DESORPTION PROCESSES OF LPG GAS. In: National Conference on Advances in Mechanical Engineering 2005 (NAME’05), 18 - 20 May 2005, Kuala Lumpur.

Herawan, Safarudin Gazali and Mohamad, Imran Syakir and Mohd Husin, Mohd Haizal and Yusof, Ahmad Anas and Mat Tokit, Ernie (2003) CARBON ADSORBENT PREPARED FROM WASTE MATERIALS FOR LPG GAS STORAGE MEDIA. In: Symposium of the Malaysian Chemical Engineers (SOMChe2003) , 29 - 30 December 2003, Pulau Penang, Malaysia.

Herawan, Safarudin Gazali and Mohamad, Imran Syakir and Mohd Husin, Mohd Haizal and Yusof, Ahmad Anas and Mat Tokit, Ernie (2003) Carbon Adsorbent from Waste Materials (Coconut Shell, Oil Palm Shell, Plastic Bag) for Hydrocarbon Gas Storage. In: Conference in conjunction with IPTA Research and Development Exposition 2003, 2 - 5 October 2003, Kuala Lumpur.

Herawan, Safarudin Gazali and Mohamad, Imran Syakir and Mohd Husin, Mohd Haizal and Yusof, Ahmad Anas and Mat Tokit, Ernie (2005) Preparation of Carbon Adsorbent by Utilizing Waste Materials for LPG Gas Storage. In: Enhancing Research for Excellence: A Seminar for Research Achievement of KUTKM, 9 - 11 September 2005, Kuantan, Pahang.

Herawan, Safarudin Gazali and Mohamad, Imran Syakir and Mohd Husin, Mohd Haizal and Yusof, Ahmad Anas and Mat Tokit, Ernie (2004) Preparation of Carbon Adsorbent by Utilizing Waste Materials for LPG Gas Storage. In: KUSTEM 3rd Annual Seminar On Sustainability Science and Management, 4 - 5 May 20004, Kuala Terengganu.

Herawan, Safarudin Gazali and Mohamad, Imran Syakir and Mohd Husin, Mohd Haizal and Yusof, Ahmad Anas and Mat Tokit, Ernie (2004) SHELL FROM PALM OIL TREE PREPARED FOR VALUABLE PRODUCTS (CARBON MOLECULAR SIEVE AND CARBON ADSORBENT). In: 3rd USM-JIRCAS Joint International Symposium Lignocellulose: Materials for the Future from the Tropics, 9 - 11 March 2004, Pulau Penang, Malaysia.

Herawan, Safarudin Gazali and Mohamad, Imran Syakir and Mohd Husin, Mohd Haizal and Yusof, Ahmad Anas and Suhaimi, Misha (2005) The Effect Of Activation In Carbon Adsorbent On Adsoprtion And Desorption Processes Of LPG Gas. In: Enhancing Research for Excellence: A Seminar for Research Achievement of KUTKM, 9 - 11 September 2005, Kuantan, Pahang.

Herawan, Safarudin Gazali and Mohamad, Imran Syakir and Mohd Husin, Mohd Haizal and Yusof, Ahmad Anas and Suhaimi, Misha (2005) The Effect Of Plastic Bag On Carbon Adsorbent In Adsorption Of LPG For Gas Storage. In: 3rd International Conference on Materials for Advanced Technologies (ICMAT2005), 3 - 8 July 2005, Singapore.

Herawan, Safarudin Gazali and Putra, Azma and Yusof, Ahmad Anas (2013) Effect of CO2 Flow Rate on the Pinang Frond-Based Activated Carbon for Methylene Blue Removal. The Scientific World Journal, 2013 (545948). pp. 1-6. ISSN 1537-744X (Online)

Herawan, Safarudin Gazali and Sulaiman, Mohd Yusoff (2007) CARBON ADSORBENT FOR INCREASING THE CAPACITY OF ALTERNATIVE FUELS STORAGE IN VEHICLE. In: 2nd International Engineering Convention 2007 (InTEC 2007), 10 - 14 March 2007, Jeddah, Saudi Arabia.

Herawan, Safarudin Gazali and Sulaiman, Mohd Yusoff (2008) THE COMPARISON OF LPG AND NATURAL GAS ADSORPTION CAPACITY IN CARBON ADSORBENT. In: REACH'07, 18 - 20 January 2008, Kuala Lumpur.

Herawan, Safarudin Gazali and Sulaiman, Mohd Yusoff (2006) Determination the Carbon Adsorbents Effectiveness on Adsorption and Desorption Processes of LPG. In: JSPS-VCC Group Seminar 2006, Natural Resources and Energy Environment (Group 9), 11 - 12 December 2006, UTM, Johor.

Herawan, Safarudin Gazali and Sulaiman, Mohd Yusoff and Imanurezeki, Mohamad and Farid Nasir , Hj. Ani (2006) Carbon adsorbent from oil palm shell (waste material). [Show/Exhibition]

Husaini, Abdullah (2008) A Precision Assembly In Plastic Injection Mould. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hussain, Noor Wahidayu (2012) Pembuatan Dan Karakterisasi Kitosan Dari Sisa Kulit Udang Dan Cengkerang Ketam. Project Report. UTeM, Melaka, Malaysia. (Submitted)

I

Idris, Maspin (2005) Ciri-Ciri Pemindahan Haba Bagi Aliran Tidak Mantap Pada Muncung Tersantak. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Imamura, H. and Imahashi, T. and Zaimi, M. and Sakata, Y. (2008) Preparation and characteristics of various rare earth nitrides. Journal of Alloys and Compounds, 451. pp. 636-639. ISSN 0925-8388

Imanurezeki, Mohamad (2009) Synthesis and characterization of micropous carbon adsorbents from oil palm shell. Masters thesis, UTeM.

Imran Syakir, Mohamad and S. Thiru, Chitrambalam (2012) Investigations on the thermo-physical properties of nanofluid-based carbon nanofibers under modified testing conditions. Int. J. Nanoelectronics and Materials, 5 (1). pp. 25-30. ISSN 1985-5761

Ishak, Muhammad Ariff (2016) Biofuel Fire Starter From Empty Fruit Bunches Of Oil Palm Fruit Waste. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ismaniza, Ismail (2008) Study On The Performance Of Carbon Adsorbent In LPG Tank Small Engine Fuelled By LPG. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Izan Shukrizal, Shukor (2008) Penyediaan Serbuk Hidroksiapatit Melalui Teknik Sol Gel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Izzaidi Fairus, Ismail (2008) Design Of Chemical Mixer Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

J

Jamal, Tukiman (2008) The Adoption And Implementation Of Best Practice In Biotech Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jayadhasan, Jayaratnam (2015) Experimental Analysis On Biodiesel Production From Waste Cooking Oil Using Conventional Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jeefferie, Abd Razak and Mohamad, Noraiham and Ab Maulod, Hairul Effendy (2013) Processability of Polypropylene-Multiwalled Carbon Nanotubes (PP/MWCNTs) Nanocomposites via Direct Melt Compounding. Journal of Elastomer and Plastics, 45 (3). pp. 239-251. ISSN 0095-2443

Jeefferie , Abdul Razak (2010) Potential application of biodegradable TS/SCFC green composite for disposable packaging food container. Other thesis, UTeM.

Jeevaanand, Ramanathan (2005) Irreversibility Factors Of Refrigeration System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Justin, Lasa (2009) Kajian Terhadap Kesesuaian Rekabentuk Pengewap Yang Digunakan Dalam Kenderaan LPG. Project Report. UTeM, Melaka, Malaysia. (Submitted)

K

Kasim, A.N. and Selamat, Mohd Zulkefli and Mohd Daud, Mohd Ahadlin and Yaakob, Mohd Yuhazri and Putra, Azma and Dhar malingam, Sivakumar (2016) Mechanical Properties Of Polypropylene Composites Reinforced With Alkaline Treated Pineapple Leaf Fibre From Josapine Cultivar. International Journal of Automotive and Mechanical Engineering (IJAME), 13 (1). pp. 3157-3167. ISSN 2180-1606

Khairol Hafiz, Haris (2006) Design And Fabricate Mould System In Plastic Injection Moulding. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairul Anuar , Mohd Nor (2008) Quality Improvement Using Classical Method Concept In Injection Molding Manufacturing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairul Anwar Adhwa, Mohamad Kasim (2015) Manufacturing, Assembly And Trial Of Core And Cavity Plastic Injection Mould For Two-Plate Family Mould Testing Specimens. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairun Nasuha, Ambar (2008) Study In The Effect Of Compatibilizer On The Properties Of Oil Palm Shell Powder Filled Polypropylene. Project Report. UTeM, Melaka, Malaysia. (Submitted)

King, Ivy Chien Chien (2016) Optimization Of Injection Molding Process On Name Tag Plastic Product. Project Report. UTeM, Melaka, Malaysia. (Submitted)

L

Lee, Kar Lian (2008) Computer Aided Mould Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Jia Qi (2012) Development Of Hydro-Atomized Spraying System For A Controlled Environment Aeroponic Farm. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Cui Fen (2016) Optimization Of Injection Molding Process On Name Tag Plastic Product. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Huey Tyng (2015) A Conceptual Design Approach On Thermal Food Container. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Loh , Yin Kuan (2008) The Relationship Between Grain Sizes And Hardness Of Sintered Alumina Product. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Lum , Yip Hing (2011) An Investigation On Effect Of Colorant Pigment On The Mechanical Properties Of Polyoxymethylene Copolymer In Long Gear. Project Report. UTeM, Melaka, Malaysia. (Submitted)

M

Mahamood, Mazlin Aida and Mohamad, Noraiham and Abd Razak, Jeefferie and Mohd Zain, Amirul Hakimi and Shueb, Mohammed Iqbal and Ab Maulod, Hairul Effendy (2017) Correlation Of Open Cell Structure With Properties Of Green Rubber Foam From Epoxidised Natural Rubber/Reclaimed Rubber Glove. Journal of Mechanical Engineering, S1 (1). pp. 113-122. ISSN 1823- 5514

Mahmud Khalil, Lias (2008) A Study Of Optimum Condition To Produce Rubber Induced (Polypropylene). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mazizi , Mohamed (2013) Emisi prestasi enjin diesel menggunakan campuran biodiesel sawit dengan bahan aditif sebagai bahan api. Project Report. UTeM, Melaka. (Submitted)

Mazliah , Mazlan (2011) Innovative Thermoplastic Starch Based Biodegradable Packaging For Food Industies Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Ali, Mohd Amran (2006) Analysis of plastic flow inside the family mould. Masters thesis, Universiti Putra Malaysia .

Md Nasir, Muhammad Afiq (2016) Portable Artificial Nose To Detect Chicken Meat Spoilage Using Ammonia Sensor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Radzai, Fatimah (2012) CHARACTERIZATION STUDY OF SILVER TITANIUM DIOXIDE (AgTiO2) THIN FILM DEPOSITED ON VARIOUS SUBSTRATES VIA SOL-GEL TECHNIQUE. Masters thesis, Universiti Teknikal Malaysia Melaka.

Md. Akil, Hazizan and Ng, Lily and ABD RAZAK , JEEFFERIE and Ong, Huilin and Ahmad, Zainal Arifin (2006) Effect of Various Coupling Agents on Properties of Alumina-filled PP Composites. Journal of reinforced Plastics and Composites, 25 (7). pp. 745-759. ISSN 0731-6844

Md. Nafiah, Mohd Rozaini (2016) Experimental Investigation Of Top Compression Piston Ring Morphology For Hydrogen Enrichment Diesel Engine. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohamad, Noraiham and Abdul Hamid, Nor Nadiah and Abdul Razak, Jeefferie and Dimin, Mohd Fairuz (2014) EFFECT OF CHITOSAN GELATINIZATION TEMPERATURE ON WATER ABSORPTION AND WATER RETENTION OF CHITOSAN BASED UREA FERTILIZER. International Journal of Automotive and Mechanical Engineering (IJAME). pp. 1-10. ISSN 2180-1606 (In Press)

Mohamad, Imran Syakir and Herawan, Safarudin Gazali and Mohd Husin, Mohd Haizal and Yusof, Ahmad Anas and Mat Tokit, Ernie (2004) THE STUDY OF LPG ADSORPTION ABILITY USING CARBON ADSORBENT TEST BED FOR CARBON ADSORBENT PREPARED FROM WASTE MATERIALS. In: Simposium Kimia Analisis Malaysia Ke 17 (SKAM-17), 24 - 26 August 2004, Kuantan, Pahang.

Mohamad Aisamudin , Shuhaimi (2013) Effect of carbon black on the properties of graphite-epoxy composite for bipolar plate. Project Report. UTeM, Melaka. (Submitted)

Mohamad Asmadi , Ahmad (2014) An investigation of sodium silicate added malaccan red clay for slip casting process. Masters thesis, UTeM.

Mohamad Fikri , Mohamad Yunus (2009) Fabrikasi Dan Memasang Alat Pemampat Gas Petroleum Cecair (GPC). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Abid, Mohd Asyadi Azam (2011) Direct Growth of Vertically-Aligned Single-Walled Carbon Nanotubes on Conducting Substrates using Ethanol for Electrochemical Capacitor. Journal of New Materials for Electrochemical Systems, 14 (3). pp. 173-178. ISSN 1480-2422

Mohd Asraf , Abd. Samad (2008) Mencipta Dan Memajukan Alat Penghantaran Dan Pengisian Mudah LPG Dari Tangki Komersial Ke Tangki Kenderaan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azhar , Ahmad (2014) Effect of activation conditions on the pinang frond based activated carbon performance in dyes removal. Masters thesis, UTeM.

Mohd Azril , Mohd Azli (2011) Potential Of Carbon Black Electrostatic Filler For The Automotive Paint Coating Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fahmi Adli , Salahuddin (2013) Investigation on diesel engine performance using the second generation of biodiesel and its blend /. Project Report. UTeM. (Submitted)

Mohd Fairuz , Roslan (2007) Merekabentuk Dan Membangunkan Tangki LPG Dilengkapi Dengan Alat Pemanas Untuk Kenderaan. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Mohd Faiz , Hamizan (2009) Kajian Terhadap Rekabentuk Injap Solenoid Bagi Sistem Gas Petroleum Cecair. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafidzal, Mohd Hanafi (2012) Investigation Size Of Soot Particle Behaviour Using Biodiesel By Computational And Experimental Techniques. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafiedzzul , Malek Riduan (2014) Mechanical properties of recycled polypropylene (rPP) processed by injection molding method. Masters thesis, UTeM.

Mohd Hafiq Iquan , Mohd Yusoff (2007) An Improvement Of Drinking Water Container Design Focusing On Structural Aspect. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafiz , Hamzah (2008) Penyediaan Bahan Piezo Seramik Melalui Gabungan Sol-Gel Dan Pemprosesan Seramik Secara Konvensional. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafizul Hanif , Ramlee (2010) "Susu Maker"; Exterior Design And Milk Powder Dispenser. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Haizal , Mohd Husin and Mohd Ridzuan, Nordin and Imran Syakir, Mohamad and Liew, Kong Yong (2006) Recovery, Regeneration , And Reuse Of Spent Bleaching Clay From Palm Oil Refining Waste Material. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hanif, Harun (2005) Prestasi Kitaran Sistem Penyejukan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Jamal, Abu (2005) Harmonic Filter Design For Induction Motor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Kamarul Shaufi, Rasidi (2011) Design And Machining Of Core And Cavity For Injection Moulding Mould. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Khairul Al'fat'hah , Izman (2013) Fencing Improvement At Palm Oil Mill To Reduce Costly Waste. Project Report. UTeM, Melaka. (Submitted)

Mohd Khalil, Mohd Zaki (2009) The Saving Of Fuel Usage In Generator By Using The Hho Gas From Electrolysis Of Water (Hydro Fuel). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Lutfi , Azmy (2013) Impact of carbonization process on briquette from palm oil residue. Project Report. UTeM, Melaka. (Submitted)

Mohd Luthfi , Omar (2013) Effect of using the second generation biodiesel and its blend in the compression ignition engines. Project Report. UTeM, Melaka. (Submitted)

Mohd Nasrul, Baharudin (2006) Analysis Of Biomass Gasifies To Produce Fuel Gas Using Palm Oil Waste In Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nor Azmi , Mohd Tarmiji (2013) Biodiesel production from waste vegetables oil using catalyzed transesterification. Project Report. UTeM, Melaka. (Submitted)

Mohd Norhishamudin , Mohamed Azlanudin (2011) Design And Finite Element Analysis Of HIP Joint Prothesis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nur Shafiq , Ahmad Razimi (2013) Co-processing of coconut shell and sugarcane residue as solid biofuel. Project Report. UTeM, Melaka. (Submitted)

Mohd Ridzuan, Nordin and Mohd Haizal , Mohd Husin and Imran Syakir, Mohamad and Raihani, Md. Kasim (2006) Technological Component And Its Impact On The Success Of SMI In Skin Care Product. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Safuan, Anuar (2012) Development Of Hydroxyapatite/Chitosan Composite Powder Via Mechanical Milling Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Salleh, Mohamad Amran and ABD RAZAK , JEEFFERIE and Ibrahim, Nor Azowa and Fakhru'l Razi, Ahmadun and Abd Rashid, Suraya (2008) The Influences of Melt-Compounding Parameters on the Thensile Properties of Low Filler Loading of Untreated-MWCNTs-Polypropylene (PP) Nanocomposites. Journal of Engineering Science and Technology, 3 (1). pp. 97-106. ISSN 1823-4690

Mohd Shakir, Ahmad (2015) Additional Of Metal Filler On Graphite/Carbon Black/Polypropylene Composite As Bipolar Plate Material For PEMFC Application. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Syazwan , Solah (2007) Kajian Pembangunan Komponen LPG Untuk Kenderaan. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Mohd Warikh, Abd Rashid (2007) Pengoptimunan Proses Pengkalsinan Dan Pensinteran Untuk Menghasilkan Kalsium Kuprum Mangan Oksida (CaCu3Mn4012)Melalui Kaedah Tindakbalas Keadaan Pepejal. Masters thesis, Universiti Malaya.

Mohd Zamberi, Mahanum and ANI, FARID NASIR and Herawan, Safarudin Gazali (2014) The effects of alkaline catalysts in used frying oil biodiesel on the diesel engine performances. Applied Mechanics and Materials, 554. pp. 449-453. ISSN 1662-7482

Mohd Zubir, Othman (2015) Temperature Effect On Carbonization Of Water Hyacinth As A Solid Biofuel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zulhilmi, Nawang (2008) Design Validation And Development Of Handphone Housing Plastic Injection Mould (Carity). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd. Fizree, Zainal Abidin (2013) Investigate Surface Integrity When Machining FC300 Cast Iron Using Uncoated Carbide Ball End Mill : Study Of Surface Profile. Project Report. UTeM, Melaka. (Submitted)

Muhammad , Muhammadin (2011) Preparation And Characterization Of Waste Fruit Starch Filled Polypropylene Composites. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad , Faishal (2015) Relayout planning to reduce waste in food industry through simulation approach. Masters thesis, Universiti Teknikal Malaysia Melaka.

Muhammad Affendi, Mustafa (2008) Analysis About The Effect Of Composition Of Green Bodies On Mullite Bonded Silicon Carbide. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Aiman, Yusof (2011) The Effects of Process Parameters In Injection Moulding On Surface Quality Of A Polypropylene (PP) Component. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Faiz , Mohd (2012) Physical Characterization Of Urea-Lignin Fertilizer Granule. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Fakhrur Radzi , Sa'adon (2013) Carbonisation temperature effect on preparation of biochar from tanduk banana peel residue (musa paradisiaca fa. corniculata) as a solid biofuel. Project Report. UTeM, Melaka. (Submitted)

Muhammad Hafidz, Ibrahim (2009) Pressurized Pyrolysis Of Wood Dust. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Hafizuddin, Mohd Gazali (2015) Densification Of Durian Peel Waste As A Solid Biofuel : Effect Of Binder Ratio. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Haikal , Hisam (2010) A Study On The Impact Of Injection Molding Parameters On The Processed Plastic Product Dimensional Stability. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Hazwan , Arzmi (2014) Improving die exchange process in textile manufacturing company with single minute exchange of die (SMED). Masters thesis, UTeM.

Muhammad Idzhar, Ishak (2010) A Study On The Structural Integrity Of Octagonal Shape Bottle Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Izhar, Abdul Raob (2008) Determination Of Effects On Different Compositions Of Polymer Blend Through Extrusion Process And The Mechanical Properties Of An ABS- PVC-LD PE. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Izzat Iqbal, Supandi (2015) Design And Fabricate Mold For Polymer Based Interlocking Tiles. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Khidir , Abdul Rahman (2009) A Study On The Optimum Natural Gas Storage Tank Design Using The Gas Adsorbent Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Lutfi , Abdul Latif (2008) Vacuum System Design For Fry Drying. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Naqiuddin, Samarul Fuad (2015) Binder Effect On Densification Of Cow Manure As A Solid Biofuel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Redzuan, Tajuddin (2008) Membangunkan Teknik Pembersihan Untuk Nata De Coco. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Syafiq, Arzmi (2015) Design And Analysis Of The Optimum Gate Size For Single Cavity Plastic Name Card Holder Injection Mold. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Syafiq, M Radzali (2015) Design Of Reactor For Plastic Recycling Through Pyrolysis Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Yazuan , Yaakup (2012) Physical Characterization Of Urea Binder Extrude At Various Weight Concentration. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Zaim, Azamam (2013) Characterization Of Epoxidised Natural Rubber Ethylene Propylene Diene Monomer (ENR-EPDM) Blend Prepared Via Solution Mixing In Toluene. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhd Nurafiz, Hussein (2010) Gas Powered Model Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhyiaddin Abdul Qadir , Abu Bakar (2014) The degradation study of PVC/ABS and PVC/ABS/Carbon blends during repeated extrusion on mechanical and thermal properties. Masters thesis, UTeM.

N

Nabil Fikri , Ahmad (2013) Fuel characteristics of biodiesel from waste vegetables oil using alkaline based catalysts. Project Report. UTeM, Melaka. (Submitted)

Nabila Huda, Azmi (2015) The study of consumer awareness of environmental food packaging technology in Malacca City. Project Report. UTeM. (Submitted)

Nadiah, Ahmad Termizi (2015) Design A Dustpan And Analyze The Optimum Injection Molding Parameters For A Gate Location. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Naim Husni , Latif (2009) Study On Typical Emission From Diesel Engine Fueled With Biodiesel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Najla Shazwani , Din (2009) Failure Analysis Of Conductive Paint Coating Using Electrochemistry Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nicholas Lian, Ak Mujah (2012) Heat Transfer Charactericstic Of A Condenser With AI203 Refrigerant Based Nanofluids As Working Fluid. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nik Mohamed Syauqi , Nik Mohamed Nasir (2015) Effect of drying process to the dimension of machined core. Masters thesis, Universiti Teknikal Malaysia Melaka.

Nizamuddin, Osman (2015) Effect Of Fuel Octane Rating On Engine Performance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Abidah, Abdul Aziz (2013) The Potential Of Epoxidized Natural Rubber As Hydrophobic Contributor In Biodegrdable Urea Fertilizer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Azimah , Mohamad (2008) Vacuum Vessel Design For Fry Drying. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Azizah , Salim (2011) The Effect Of Material And Tool Properties On The Chemical And Physical Properties Of Coolant. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Azmmi, Masripan (2006) Pressurised pyrolysis of rice husk. Masters thesis, Universiti Teknologi Malaysia .

Nor Fazliyana, Abdullah (2015) Design And Analysis Of The Optimum Gate Size For Multi-Cavity Plastic Name Card Injection Mould. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norafzan , Mohd Ranai (2008) Determination Of The Effects On Different Compositions Of Polymer Blend Through Extrusion Process And The Mechanical Properties Of An PVC-PP-ABS. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noraiham, Mohamad and Mazliah, Mazlan and Jeefferie, Abd Razak and Nur Sharafina, Zainol and Amirul Asyraf, Mat Nasir and Hairul Effendy, Ab Maulod (2016) Compressive Properties Of Green Rubber Foam From Reclaimed Rubber Glove. International Journal of Materials And Product Technology, 53 (3-4). pp. 252-266. ISSN 0268-1900

Norazhar, Ali (2005) Polymer Blends - PP/HDPE. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nordin, Mohd Ridzuan and Kasim, Raihani and Mohd Husin , Mohd Haizal and Mohamad, Imran Syakir (2007) TECHNOLOGICAL COMPONENT AND ITS IMPACT ON THE SUCCESS OF SMI IN SKIN CARE PRODUCT. In: International Conference for Engineering and ICT (ICEI 2007) , 27-28 Nov, 2007 , Equatorial Hotel, Malacca, Malaysia .

Norfairuz , Mansor (2009) Kajian Kemungkinan Menghasilkan Bahan Bakar (Biofuel) Alternatif Daripada Ubi Kayu Dan Merekabentuk Dapur Gas Etanol. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norhabib, Mohd Kamin (2009) Study On The Effect Performance Of Carbon Adsorbent With Different Term Of Size And Method In LPG Tank. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norihan , Abdul Hamid (2014) Pam mikro terma pneumatik dengan aktuator membran filem nipis polimid untuk kegunaan bioperubatan. PhD thesis, UTeM.

Norman , Omar (2007) Analysis Of Plastic Flow In Two Plate Injection Mould. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Normasleha, Yasin (2015) Optimization Of Organic Candle Green Production From Waste Cooking Oil (Effect Of Ratio Of Oil Crystallizer To Waste Cooking Oil). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Asila, Esa (2015) Mechanical Properties Of Acrylonitrile -Butadiene Styrene-(ABS) Filled With Cockle Shell Powder(CSP). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Asma Atikah, Mohd Razikin (2015) Design Green Food Packaging For Take Away Hot Dishes. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Farizan, Ayoob (2013) The Effect Of Colouring Agent (Fe2O3) On The Physical And Mechanical Properties Of Glass Ceramic Produced By Recycling Waste Glass. Masters thesis, Universiti Teknikal Malaysia Melaka.

Nur Hanisah, Jasmi (2015) Experimental Study Of Different Hot Flue Air Speed Effects On Young Coconut Grain Moisture Level And Resulting Retention Time At Fixed Hot Flue Air Temperature. Project Report. UTeM, Faculty of Engineering Technology . (Submitted)

Nur Haziqah, Mohd Ruzmi (2015) Project Solid Fuel From A Binary Mixture Of Waste Materials Of Palm Oil Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Rifhan, Rosli (2010) The Effect Of Sintering Temperature And Clay Addition On Glass Ceramic Produced From Recycled Glass For Structural Application (CIP Method). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Sabrina , Basharuddin (2013) A study on the effects of parameters for optimizing biodiesel production. Project Report. UTeM, Melaka. (Submitted)

Nuraida , Mohd Ramlee (2007) Process Optimization For Plastic Injection Mould Case Study-Container Mould. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Nurhafiza , Zinalass (2015) Design and simulation of cooling channel for plastic injection moulding. Project Report. UTeM. (Submitted)

Nurhamizah, Ahmad Rusli (2015) Effects Of Ag On TiO2 Dip-Coating On Unglazed Ceramic Substrates For Anti-Microbial Coating. Masters thesis, Universiti Teknikal Malaysia Melaka.

Nurhashima, Shafiee (2010) Sintering Characteristics Of Injection Moulded Components Using Waste Rubber Biopolymer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurhidayah, Hamdan (2009) Development Of Magneto Electrolysis For Hydrogen Generator System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul 'Ain , Haris (2009) Preparation And Characterization Of Ceramic Porcelain Prepared Through Slip Casting. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Asima , Zainon (2007) Kajian Kebolehlaksanaan Metanol Sebagai Bahan Api Enjin. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Nurul Syarafina , Sholahuddin (2007) Analysis Of Plastic Flow Inside The Three Plate Mould. Project Report. UTeM, Melaka, Malaysia. (Submitted)

O

Omar, Nooririnah and Abdullah, Rohana and Mustafa, Nuzaimah and Azhari, Muhammad azwar (2013) REVIEW ON HIGH PRESSURE COLD SPRAY (HPCS) PROCESS AS CORROSION TREATMENT FOR AGING AIRCRAFT PART. In: International conference on engineering education 2013 , 23-25/12/2013, Madinah. (Submitted)

Osman, Edynoor and Abd Rashid , Mohd Warikh and T., Moriga and K., Murai and Abd Manaf, Mohd Edeerozey (2017) Transparent Coating Oxide - Indium Zinc Oxide As Conductive Coating : A Review. Reviews On Advanced Materials Science, 49 (-). pp. 150-157. ISSN -

Othman, Muhammad Iskandar (2016) Development Of Biodegradable Plastic With Natural Sources As Packaging Material. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Othman, Norfaridatul Akmaliah and Jabar, Juhaini and Ahmad Murad, Murzidah and Kamarudin, Mohd Fauzi (2014) Factors Influencing Safety Management Systems Petrochemical Processing Plants. Journal of Technology Management and Technopreneurship, 2 (2). pp. 27-39. ISSN 2231-7996

R

Raja Mohamed, Raja Nor Azrini (2014) Examining Health And Safety Management System Effectiveness In Oil And Gas Training Company In Bangi. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ramakrishnan, Karthigeyan (2015) Enhance The Performance Of Condenser By Using Evaporative Cooling Method For Split Type Air Conditioner. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ramli , Junid (2006) A Study On UV Curing Process Of Polymeric Materials. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rasidan, Basiron (2008) Effect Of gasifier Dimension On Wood Combustion Through CFD. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Razali, Nadlene (2017) Development And Characterization Of Roselle Fibre Reinforced Vinyl Ester Composites. PhD thesis, Universiti Teknikal Malaysia Melaka.

Roshman, Rozlina (2014) Renewable Energy Adoption As Energy Efficiency : A Case Study Of Biomass Conversion To Biofuels In Petronas Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rosidah, Jaafar (2007) Design And Analysis of Plastic Injection Moulded Part For Two Plate Injection Mould. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rozlan , Ramli (2007) Mereka Bentuk Tangki Kenderaan Gas Asli. Project Report. Melaka, Malaysia, UTeM. (Submitted)

S

S. G. Herawan, and M. S. Hadi, and Md. R. Ayob, and Putra, Azma (2013) Characterization of Activated Carbons from Oil-Palm Shell by CO2 Activation with No Holding Carbonization Temperature. The Scientific World journal, 2013. pp. 1-6. ISSN 1537-744X

Safarudin Gazali, Herawan and Khisbullah, Hudha and Muhamad Syamsul, Hadi (2010) Study and development of LPG vehicle using carbon adsorbent in fuel tank for increasing storage capacity. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Safarudin Gazali , Herawan and Imran Syakir, Mohamad and Mohd Haizal , Mohd Husin and Ahmad Anas, Yusof and Ernie, Mat Tokit (2003) Carbon Molecular Sieve From Waste Material (Coconut Shell, Oil Palm Shell, Plastic Bag). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Safarudin Gazali , Herawan and Imran Syakir, Mohamad and Mohd Haizal , Mohd Husin and Ahmad Anas, Yusof and Suhaimi, Misha and Imanurezeki, Mohamad (2005) The Effect Of Plastic Bag In The Base Char Of Carbon Adsorbent From Waste Materials (Oil Palm Shell) Due To LPG Adsorption Capacity. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Safarudin Gazali , Herawan and Ridzuan, Nordin and Imran Syakir, Mohamad and Mohd Haizal , Mohd Husin and Ahmad Anas, Yusof and Suhaimi, Misha and Imanurezeki, Mohamad (2005) The Comparison Of LPG And Natural Gas Adsorption Capacity In Carbon Adsorbent. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Saifol Azman , Nordin (2007) Gage Capability Study Of Thin Film Coating Thickness Measurement Method Using Scanning Electron Microscopes (SEM). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Salbanu, Said (2007) Reverse Engineering Of Hand Phone Housing Plastic Injection Molding. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Salmidi, Taraji (2011) Die Design and Optimization To Reduce Cavity In Extrusion Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Samsul Anuar, Sulong (2014) Characterization of composite tiles fabricated from recycled polypropelene (rPP) and silica using hot press method. Masters thesis, UTeM.

Saqinah , Bakri (2009) Study On Performance Of Vacuum Fry Drying System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sarvin Ram, Seriramulu (2015) Optimizing Biodiesel Production From Rubber Seed Oil Using Conventional Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Se, Sian Meng (2015) Synthesis Of Urea Impregnated Ruber Wood Biochar For Retention Of Nitrogenoues Nutrient In Soil. PhD thesis, Universiti Teknikal Malaysia Melaka.

Shafarul, Mustafa (2011) Synthesis Of Activated Carbon From Waste Raw Material Using 'Buluh Lemang' SCHIZOSCHYUM BRACHYCLADUM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sin, Chu Woon (2013) Design And Development Of Thermal Food Container. Project Report. UTeM, Melaka. (Submitted)

Siti Aisyah, Safuan (2013) Thermal Absorption Properties Of Spent Tea Leaf Filled Polyurethane Composite Material. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Hasnaa, Zainal (2015) Effect Of ZDDP Addition in Canola Oil As Antioxidizing Agent For Lubrication Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Khadijah, Bharum (2013) Design And Analysis Of Resin Transfer Mould For Composite Part. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Masyita, Noraziman (2015) Methane Production From Co – Digestion Of Chicken Manure With Decanter Cake From Palm Oil Industry Waste. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Noor Elyina, Ab Zarim (2008) The Use of MGO as Sintering Aid for Alumina Ceramics. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Nor Mazian, Embran (2006) Biotechnology Info Kiosk. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Norfaznie , Ahmad Najib (2009) Fabrication Of Dense Alumina Through Slip Casting Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Nurhashima, Ismail (2015) Domestic LPG Leakage Detection System Using Microcontroller And GSM Network. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Nurzahidah, Md Zakhi (2014) A study on hot water generator (HWG) performance at drying process in BERNAS factory. Project Report. UTeM. (Submitted)

Siti Salmah, Mohd Sani (2015) Effect Of Injection Moulding Parameters On Warpage Deflection. Masters thesis, Universiti Teknikal Malaysia Melaka.

Siti Sarah , Zahari (2013) The heat transfer phenomenon within volumetric receiver of concentrated solar tower using Diamond Like Carbon (DLC) material. Project Report. UTeM, Melaka. (Submitted)

Siti Saudah , Mohd Nasir (2007) Information Requirement For Mould And Die Process Planning Activities. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Suberi, Hanis Amira (2016) Effect Of Surfactant On The Surface Integrity Of Stainless Steel Using EDM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sugumar, Dharmalingam (2009) Design, Fabrication And Evaluation Of Universal Polymerase Chain Reaction Devices. PhD thesis, Deakin University.

Suhaila , Yacob (2007) Study The Parameter Optimization In The Injection Molding. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Sullyfaizura, Mohd Rawi (2006) Investigate Of Parameter Setting In Plastic Injection Molding. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sy Ahmad Fairuz , Yulaimi (2007) Mengoptimumkan Pengisian Gas Petroleum Cecair (LPG) Daripada Tangki Komersial Kepada Tangki Kenderaan. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Syahrial, Fadhli (2016) Hydrogen Energy Production From Biomass-Derived Polysaccharides Using Radio Frequency In-Liquid Plasma. PhD thesis, Universiti Teknikal Malaysia Melaka.

T

Tan, Teng Teng (2015) Effects Of Curing Angle On Laminated Unsaturated Polyster : Epoxy Composites Structures. Masters thesis, Universiti Teknikal Malaysia Melaka.

Tay , Yon Yon (2010) Simulation Of Biodiesel Production From Used Frying Oil (UFO) Using Alkaline - Based Catalysts. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Teo, Chun Earn (2013) Design and fabrication of polyvinyl chloride tie-rod cylinder for low pressure water hydraulic system. Project Report. UTeM, Melaka. (Submitted)

Thong, Ming Chuin (2013) Redesign Of Bombardier PUTRA LRT Seat. Project Report. UTeM, Melaka. (Submitted)

U

Umizhatul Najwa , Jamaludin (2015) Design and analysis of injection moulding feed system of automotive part by using Taguchi approach. Project Report. UTeM. (Submitted)

W

Wan Mazuwan , Wan Azhal (2008) Fabrication And Characterization Of Oil Palm Shell Powder Filled Polypropylene. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Mohd Zhafran , Wan Zulkiffeli (2008) Kajian Tentang Komposisi Seramik Berasaskan Campuran Alumina Di Dalam Penggunaan Sebagai Penapis Air Akuarium. Project Report. UTeM, Melaka, Malaysia. (Submitted)

William Granetin, Thomas (2015) Investigation Of Exergy Analysis In Vapour Compression Refrigeration System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wo, Angeline Weng Wei (2016) Production And Characterization Of Fibrillated Nanocellulose Fiber Derived From Spent Tea Leaves. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wong , Peng Liang (2008) The Adoption And The Implementation Of Best Practice In Malaysia Biotech Manufacturing Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Y

Yap, Pei Yung (2010) Biodiesel Production From Used Frying Oil (UFO) Using Alkaline-Based Catalysts. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yew, Wai Keai (2010) Diesel Engine Performances Of Alkaline-Catalyst UFO Biodiesel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yong, Chin Yi (2015) Design And Development Of Customized Drinking Bottle Cap For SME. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yusmady, Mohamed Arifin and Safarudin Ghazali, Herawan (2011) A Study Of Diesel And Bio-Diesel Fuels Deposit Formation Due To Fuel Spray Impingement. Project Report. UTeM. (Submitted)

Z

Zakaria, Ahmad Zikri (2016) Design And Analysis Of A Plastic Book Mark Injection Mould. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zubaidi, Nur Zurain (2016) Analysis Comparison Between Solidworks Plastics And Simulation Moldflow Adviser Of Optimum Gate Size For The Design Of A Single Cavity Plastic Name Card Holder Mold. Project Report. UTeM, Melaka, Malaysia. (Submitted)

This list was generated on Fri Oct 20 02:26:09 2017 MYT.