Items where Subject is "T Technology > TP Chemical technology"

Article

Abal Abas, Zuraida (2013) Extended Advancing Front Technique for the Initial Triangular Mesh Construction on a Single Coil for Radiative Heat Transfer. Arabian Journal for Science and Engineering. pp. 1-18. ISSN 13198025

Ab Ghani, Sharin and Zainuddin, Hidayat and Muhamad, Nor Asiah (2015) Performance Of Palm Shell Activated Carbon As An Alternative Adsorbent For Reclamation Of Used Transformer Oil. ARPN Journal Of Engineering And Applied Sciences, 10. pp. 10752-10758. ISSN 1819-6608

Ahmad, Mohd Azhar and Herawan, Safarudin Gazali and Yusof, Ahmad Anas (2014) Effect of activation time on the pinang frond based activated carbon for remazol brilliant blue r removal. Journal of Mechanical Engineering and Sciences (JMES) , 7. pp. 1085-1093. ISSN 2231-8380

Ahmad, Mohd Azhar and Herawan, Safarudin Gazali and Yusof, Ahmad Anas (2014) Equilibrium, kinetics, and thermodynamics of remazol brilliant blue R dye adsorption onto activated carbon prepared from pinang frond. ISRN Mechanical Engineering, 2014. pp. 1-7. ISSN 2356-7872

Alkahari, Mohd Rizal and Furumoto, Tatsuaki and Ueda, Takashi and Hosokawa, Akira (2014) Consolidation Characteristics Of Ferrous-Based Metal Powder In Additive Manufacturing. Journal Of Advanced Mechanical Design, Systems, And Manufacturing, 8 (1). pp. 1-16. ISSN 1881-3054

Azhari, Muhamad Azwar and Omar, Nooririnah and Mustaffa , Nuzaimah (2014) Carbon Dioxide Permeation Characteristics in Asymmetric Polysulfone Hollow Fiber Membrane: Effect of Constant Heating and Progressive Heating. Advanced Materials Research Journal, 896. pp. 37-40. ISSN 10.4028

Azhari, Muhamad Azwar and Arith, Faiz and Ali, Nurfadzillah and Rodzi, Shekin and A. Karim, Nor Khalilah (2015) Fabrication Of Low Cost Sensitized Solar Cell Using Natural Plant Pigment DYES. ARPN Jurnal Of Engineering And Applied Science, 10 (16). 7092 - 7096. ISSN 1819-6608

Azhari, Muhamad Azwar and Fathe’li, Muhammad Asyraf and Aziz, Nur Syawal Aidill and Mohd Nadzri, Muhammad Syahir and Yusuf, Yusliza (2015) A Review On Addition Of Zinc Dialkyldithiophosphate In Vegetable Oil As Physical Properties Improver. ARPN Journal Of Engineering And Applied Sciences, 10 (15). pp. 6496-6500. ISSN 1819-6608

Azhari, Muhamad Azwar and Tamar, Muhamad Faisal and Mat Nuri, Nur Rashid and Yusoff, Mohd Rahimi (2015) Physical Property Modification Of Vegetable Oil As Biolubricant Using ZDDP. ARPN Journal Of Engineering And Applied Sciences, 10 (15). 6525 - 6528. ISSN 1819-6608

Bakar, Norasiken and Mohd Hatta, Nuraziera and Shahbodin, Faaizah (2012) 3D approach in the development of chemistry subject at UTeM: atom cubic. Malaysian Journal of Educational Technology, 12 (4). pp. 1-4. ISSN 1675-0292

Dhar Malingam, Sivakumar and Subramaniam, Kathiravan and Selamat, Mohd Zulkefli and Said, Md Radzai and Subramonian, Sivarao (2016) A study on impact behaviour of a novel oil palm fibre reinforced metal laminate system. ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2483-2488. ISSN 1819-6608

Hashim, Ummi Rabaah and Kanchymalay, kasturi and Salim, Naomie and Sukprasert, Anupong and Krishnan, Ramesh (2017) Multivariate Time Series Forecasting Of Crude Palm Oil Price Using Machine Learning Techniques. IOP Conference Series: Materials Science And Engineering, 226. pp. 1-9. ISSN 1757-8981

Herawan, Safarudin Gazali and Ayob, Md Razali and Putra, Azma (2013) Characterization of activated carbons from Oil-palm-shell by CO2 activation with no holding carbonization temperature. The Scientific World Journal, 2013 ( (Articl). pp. 1-6. ISSN 1537-744X (Online)

Herawan, Safarudin Gazali and Putra, Azma and Yusof, Ahmad Anas (2013) Effect of CO2 Flow Rate on the Pinang Frond-Based Activated Carbon for Methylene Blue Removal. The Scientific World Journal, 2013 (545948). pp. 1-6. ISSN 1537-744X (Online)

Imamura, H. and Imahashi, T. and Zaimi, M. and Sakata, Y. (2008) Preparation and characteristics of various rare earth nitrides. Journal of Alloys and Compounds, 451. pp. 636-639. ISSN 0925-8388

Imran Syakir, Mohamad and S. Thiru, Chitrambalam (2012) Investigations on the thermo-physical properties of nanofluid-based carbon nanofibers under modified testing conditions. Int. J. Nanoelectronics and Materials, 5 (1). pp. 25-30. ISSN 1985-5761

Jeefferie, Abd Razak and Mohamad, Noraiham and Ab Maulod, Hairul Effendy (2013) Processability of Polypropylene-Multiwalled Carbon Nanotubes (PP/MWCNTs) Nanocomposites via Direct Melt Compounding. Journal of Elastomer and Plastics, 45 (3). pp. 239-251. ISSN 0095-2443

Kasim, Ayu Natasya and Selamat, Mohd Zulkefli and Mohd Daud, Mohd Ahadlin and Yaakob, Mohd Yuhazri and Putra, Azma and Dhar Malingam, Sivakumar (2016) Mechanical properties of polypropylene composites reinforced with alkaline treated pineapple leaf fibre from Josapine cultivar. International Journal of Automotive and Mechanical Engineering (IJAME), 13 (1). pp. 3157-3167. ISSN 2229-8649

Lee, Shing Chuan and Tamaldin, Noreffendy and Abdollah, Mohd Fadzli (2017) Tribological Performance Of Low Blend Decanter Cake Biodiesel. Industrial Lubrication And Tribology, 69 (3). pp. 425-432. ISSN 0036-8792

Liew, Weng Tack and Mohd Abid, Mohd Asyadi Azam and Raja Seman, Raja Noor Amalina (2017) Structural And Electronic Properties Of Transition-Metal Oxides Attached To A Single-Walled CNT As A Lithium-Ion Battery Electrode : A First-Principles Study. American Chemical Society, 121 (-). pp. 2636-2642. ISSN 2636−2642

Lum, Yip Hing and Shaaban, Azizah and Mohamad, Noraiham and Dimin @ Mohd Amin, Mohd Fairuz (2016) Slow release of urea encapsulated by starch PVA matrix. Key Engineering Materials, 707. pp. 28-31. ISSN 1662-9795

Lum, Yip Hing and Shaaban, Azizah and Mohamad, Noraiham and Dimin @ Mohd Amin, Mohd Fairuz and Mohamad Yatim, Norazlina (2016) Boric acid modified starch polyvinyl alcohol matrix for slow release fertilizer. E-Polymers, 16 (2). pp. 151-158. ISSN 1618-7229

Mahamood, Mazlin Aida and Mohamad, Noraiham and Abd Razak, Jeefferie and Mohd Zain, Amirul Hakimi and Shueb, Mohammed Iqbal and Ab Maulod, Hairul Effendy (2017) Correlation Of Open Cell Structure With Properties Of Green Rubber Foam From Epoxidised Natural Rubber/Reclaimed Rubber Glove. Journal of Mechanical Engineering, S1 (1). pp. 113-122. ISSN 1823- 5514

Md Ali, Mohd Amran and Abdullah, Abu and Mohamad, Effendi and Salleh, Mohd Shukor and Hussein, Nur Izan Syahriah and Muhammad, Z. and Dahaman, Shamshulizam (2018) Tensile properties of ternary blends for HDPE/PP/Recycle HDPE in blow moulding process. Journal Of Advanced Manufacturing Technology (JAMT) , 12 (1(2)). pp. 31-41. ISSN 1985-3157

Md Ali, Mohd Amran and Mohd Ali, Noorfa Idayu and Abdullah, Zulkeflee and Abu Bakar, Mohd Hadzley and Subramonian, Sivarao and Abdul Aziz, Mohd Sanusi and Abdullah, Abu (2017) Interchangeable Core And Cavity Plates For Two-Plate Family Injection Mould. Journal Of Mechanical Engineering And Sciences (JMES), 11 (3). pp. 2815-2824. ISSN 2289-4659

Md. Akil, Hazizan and Ng, Lily and ABD RAZAK , JEEFFERIE and Ong, Huilin and Ahmad, Zainal Arifin (2006) Effect of Various Coupling Agents on Properties of Alumina-filled PP Composites. Journal of reinforced Plastics and Composites, 25 (7). pp. 745-759. ISSN 0731-6844

Misha, Suhaimi and Ahmed Al-Qadhi, Ahmed Abdullah and Mohd Rosli, Mohd Afzanizam and Akop, Mohd Zaid (2017) Design And Simulation Of An Optimized Mixed Mode Solar Dryer Integrated With Desiccant Material. International Journal of Mechanical & Mechatronics Engineering , 17. pp. 65-73. ISSN 2077-124X (online) 2227-2771 (Print)

Mohamad, Noraiham and Abdul Hamid, Nor Nadiah and Abdul Razak, Jeefferie and Dimin @ Mohd Amin, Mohd Fairuz (2013) Effect of chitosan gelatinization temperature on water absorption and water retention of chitosan-based urea fertilizer. International Journal of Automotive and Mechanical Engineering (IJAME), 8. pp. 1357-1366. ISSN 2180-1606

Mohamad Yatim, Norazlina and Norazman, Farhaneem and Shaaban, Azizah and Dimin @ Mohd Amin, Mohd Fairuz and Mohamad, Norhidayah (2019) Characterization Of phosphoric acid biochar derived from rubber wood sawdust for enhancement Of urea fertilizer impregnation. ARPN Journal Of Engineering And Applied Sciences, 14 (12). pp. 2185-2192. ISSN 1819-6608

Mohd Abid, Mohd Asyadi Azam (2011) Direct Growth of Vertically-Aligned Single-Walled Carbon Nanotubes on Conducting Substrates using Ethanol for Electrochemical Capacitor. Journal of New Materials for Electrochemical Systems, 14 (3). pp. 173-178. ISSN 1480-2422

Mohd Rosli, Mohd Afzanizam and Mat, Sohif and Sopian, Kamauzzaman and Salleh, Elias and Sharif, Mohd Khairul Anuar (2018) Experimental Development To Determine Time Constant For Polymer Collector. ARPN Journal of Engineering and Applied Sciences, 14. pp. 1523-1527. ISSN 1819-6608

Mohd Salleh, Mohamad Amran and ABD RAZAK , JEEFFERIE and Ibrahim, Nor Azowa and Fakhru'l Razi, Ahmadun and Abd Rashid, Suraya (2008) The Influences of Melt-Compounding Parameters on the Thensile Properties of Low Filler Loading of Untreated-MWCNTs-Polypropylene (PP) Nanocomposites. Journal of Engineering Science and Technology, 3 (1). pp. 97-106. ISSN 1823-4690

Mohd Zamberi, Mahanum and ANI, FARID NASIR and Herawan, Safarudin Gazali (2014) The effects of alkaline catalysts in used frying oil biodiesel on the diesel engine performances. Applied Mechanics and Materials, 554. pp. 449-453. ISSN 1662-7482

Noraiham, Mohamad and Mazliah, Mazlan and Jeefferie, Abd Razak and Nur Sharafina, Zainol and Amirul Asyraf, Mat Nasir and Hairul Effendy, Ab Maulod (2016) Compressive Properties Of Green Rubber Foam From Reclaimed Rubber Glove. International Journal of Materials And Product Technology, 53 (3-4). pp. 252-266. ISSN 0268-1900

Norazman, Farhaneem and Dimin @ Mohd Amin, Mohd Fairuz and Shaaban, Azizah and Mohamad, Noraiham (2017) Optimization of phosphoric acid treatment biochar using response surface method. Journal Of Advanced Manufacturing Technology (JAMT) , 12 (SI). pp. 453-466. ISSN 1985-3157

Osman, Edynoor and Abd Rashid, Mohd Warikh and T., Moriga and K., Murai and Abd Manaf, Mohd Edeerozey (2017) Transparent Coating Oxide - Indium Zinc Oxide As Conductive Coating : A Review. Reviews On Advanced Materials Science, 49. pp. 150-157. ISSN 1605-8127

Othman, Norfaridatul Akmaliah and Jabar, Juhaini and Ahmad Murad, Murzidah and Kamarudin, Mohd Fauzi (2014) Factors Influencing Safety Management Systems Petrochemical Processing Plants. Journal of Technology Management and Technopreneurship, 2 (2). pp. 27-39. ISSN 2231-7996

Parnon, Mohamad Afiq Amiruddin and Abdul Rasib, Amir Hamzah (2019) Analysis On NOx Formation Of Biofuels. International Journal Of Engineering & Technology, 8 (1.1). pp. 98-103. ISSN 2227-524X

Razali, Nadlene and Sapuan, S.M. and Jawaid, Mohammad and Ishak, Mohamad Ridzwan (2015) Mercerization Effect On Morphology And Tensile Properties Of Roselle Fibre. Applied Mechanics And Materials, 754-55. pp. 955-959. ISSN 1662-7482

S. G. Herawan and M. S. Hadi and Md. R. Ayob and Putra, Azma (2013) Characterization of Activated Carbons from Oil-Palm Shell by CO2 Activation with No Holding Carbonization Temperature. The Scientific World journal, 2013. pp. 1-6. ISSN 1537-744X

Sheikh Md Fadzullah, Siti Hajar and Ramli, Siti Nur Rabiatutadawiah and Mustafa, Zaleha (2017) The Effect Of Alkaline Treatment And Fiber Length On Pineapple Leaf Fiber Reinforced Poly Lactic Acid Biocomposites. Jurnal Teknologi, 79. pp. 111-115. ISSN 2180–3722

Wahid, Mohammad Khalid and Ahmad, Mohd Nazri and Osman, Mohd Hairizal and Maidin, Nurul Ain and Ab Rahman, Mohd Hidayat and Hussin, Mohamed Saiful Firdaus and Kasno, Mohammad `Afif (2019) Development Of Biodegradable Plastics For Packaging Using Wastes From Oil Palm And Sugar Cane. International Journal Of Recent Technology And Engineering (IJRTE), 8 (1S5). pp. 75-78. ISSN 2277-3878

Zainal Abidin, Muhammad Zaimi and Noda, Kazuhiko (2012) Surface Crystallinity Control And Electrochemical Evaluation Of Electroless Nickel Alloy Deposition. Journal Of Functional Graded Materials, 26. pp. 66-71. ISSN 2188-3807

Book Chapter

Abd Manaf, Mohd Edeerozey (2013) Optical Properties of Cellulose Esters and Applications to Optical Functional Films. In: Pulp production and processing: From papermaking to high-tech products. Smithers Rapra Technology Ltd, United Kingdom, pp. 391-411. ISBN 978-1-84735-633-8

Conference or Workshop Item

Ahmad, Mohd Azhar and Herawan, Safarudin Gazali and Yusof, Ahmad Anas (2013) Effect of Activation Time on the Pinang Frond Based Activated Carbon for Remazol Brilliant Blue R Removal. In: Malaysian Technical Universities Conference on Engineering and Technology (MUCET 2013), 3 - 4 December 2013, MS Garden Hotel, Kuantan, Pahang..

Hasan Basari, Abd Samad and Razali, Hazlina and Hussin, Burairah and Asmai, Siti Azirah and Ibrahim, Nuzulha Khilwani and Shibghatullah, Abdul Samad (2011) The integration of simple Markov model in solving single line production system. In: 7th International Conference on Information Technology in Asia (CITA 2011) , 12-14 Julai 2011, Kuching, Sarawak. (Submitted)

Herawan, Safarudin Gazali (2003) Carbon molecular sieves from oil palm shell for separation of methane from carbon dioxide gas mixture. In: Engineering and Technology Conference 2003 (EnTech 2003), 30 July - 1 August 2003, Kucing, Serawak.

Herawan, Safarudin Gazali (2000) MICROPOROUS CARBON ADSORBENTS FROM OIL PALM SHELLS FOR GAS SEPARATION. In: ”. The 3rd Asia Pacific Conference on Sustainable Energy and Environment Technologies, 3 - 6 December 2000, Hongkong.

Herawan, Safarudin Gazali (2000) PROCESSING MICROPOROUS CARBON ADSORBENTS BY PHYSICAL AND CHEMICAL TREATMENTS FOR GAS SEPARATION. In: SOMCHE 2000, 30 - 31 October 2000, Kuala Lumpur.

Herawan, Safarudin Gazali (2000) REMOVAL OF CARBON DIOXIDE BY MICROPOROUS CARBON ADSORBENTS FROM OIL PALM SHELLS. In: AMER 2000, 4 - 5 October 2000, Shah Alam.

Herawan, Safarudin Gazali (2003) THERMOGRAVIMETRY ANALYSIS FOR DETERMINING THE ADSORPTION SELECTIVITY OF CARBON MOLECULAR SIEVE FROM OIL PALM SHELL. In: The 3rd International Conference on Advances in Strategic Technologies, 12 - 14 August 2003, Kuala Lumpur.

Herawan, Safarudin Gazali (2003) UTILIZATION OF OIL PALM SHELL BY CONVERTED TO CARBON MOLECULAR SIEVE FOR SEPARATION OF METHANE FROM CARBON DIOXIDE AS A WASTE MINIMIZATION. In: Environment 2003, 18 - 19 February 2003, Pulau Penang, Malaysia.

Herawan, Safarudin Gazali and Ayob, Md Razali (2009) Characteristic of Different Precursor Size of Activated Carbon Produced From Oil Palm Shell in Adsorption of LPG. In: International Conference on Applications and Design in Mechanical Engineering (ICADME), 11 - 13 October 2009, Pulau Penang, Malaysia.

Herawan, Safarudin Gazali and Ayob, Md Razali (2009) Effect of different carbonization of activated carbon produced from oil palm shell in adsorption of Liquefied Petroleum Gas (LPG). In: International Conference of Sustainable Energy (ICSE 2009), 16 - 17 June 2009, Bandung, Indonesia.

Herawan, Safarudin Gazali and Ayob, Md Razali (2009) Effect of pyrolysis temperature on pore development of oil palm-shell activated carbons. In: International Conference and Exhibition on Science and Technology in Biomass Production (ICEBP) 2009, 25 - 26 November 2009, Bandung, Indonesia.

Herawan, Safarudin Gazali and Mohamad, Imran Syakir and Mohd Husin, Mohd Haizal and Yusof, Ahmad Anas (2005) THE EFFECT OF ACTIVATION IN CARBON ADSORBENT ON ADSORPTION AND DESORPTION PROCESSES OF LPG GAS. In: National Conference on Advances in Mechanical Engineering 2005 (NAME’05), 18 - 20 May 2005, Kuala Lumpur.

Herawan, Safarudin Gazali and Mohamad, Imran Syakir and Mohd Husin, Mohd Haizal and Yusof, Ahmad Anas and Mat Tokit, Ernie (2003) CARBON ADSORBENT PREPARED FROM WASTE MATERIALS FOR LPG GAS STORAGE MEDIA. In: Symposium of the Malaysian Chemical Engineers (SOMChe2003) , 29 - 30 December 2003, Pulau Penang, Malaysia.

Herawan, Safarudin Gazali and Mohamad, Imran Syakir and Mohd Husin, Mohd Haizal and Yusof, Ahmad Anas and Mat Tokit, Ernie (2003) Carbon Adsorbent from Waste Materials (Coconut Shell, Oil Palm Shell, Plastic Bag) for Hydrocarbon Gas Storage. In: Conference in conjunction with IPTA Research and Development Exposition 2003, 2 - 5 October 2003, Kuala Lumpur.

Herawan, Safarudin Gazali and Mohamad, Imran Syakir and Mohd Husin, Mohd Haizal and Yusof, Ahmad Anas and Mat Tokit, Ernie (2005) Preparation of Carbon Adsorbent by Utilizing Waste Materials for LPG Gas Storage. In: Enhancing Research for Excellence: A Seminar for Research Achievement of KUTKM, 9 - 11 September 2005, Kuantan, Pahang.

Herawan, Safarudin Gazali and Mohamad, Imran Syakir and Mohd Husin, Mohd Haizal and Yusof, Ahmad Anas and Mat Tokit, Ernie (2004) Preparation of Carbon Adsorbent by Utilizing Waste Materials for LPG Gas Storage. In: KUSTEM 3rd Annual Seminar On Sustainability Science and Management, 4 - 5 May 20004, Kuala Terengganu.

Herawan, Safarudin Gazali and Mohamad, Imran Syakir and Mohd Husin, Mohd Haizal and Yusof, Ahmad Anas and Mat Tokit, Ernie (2004) SHELL FROM PALM OIL TREE PREPARED FOR VALUABLE PRODUCTS (CARBON MOLECULAR SIEVE AND CARBON ADSORBENT). In: 3rd USM-JIRCAS Joint International Symposium Lignocellulose: Materials for the Future from the Tropics, 9 - 11 March 2004, Pulau Penang, Malaysia.

Herawan, Safarudin Gazali and Mohamad, Imran Syakir and Mohd Husin, Mohd Haizal and Yusof, Ahmad Anas and Suhaimi, Misha (2005) The Effect Of Activation In Carbon Adsorbent On Adsoprtion And Desorption Processes Of LPG Gas. In: Enhancing Research for Excellence: A Seminar for Research Achievement of KUTKM, 9 - 11 September 2005, Kuantan, Pahang.

Herawan, Safarudin Gazali and Mohamad, Imran Syakir and Mohd Husin, Mohd Haizal and Yusof, Ahmad Anas and Suhaimi, Misha (2005) The Effect Of Plastic Bag On Carbon Adsorbent In Adsorption Of LPG For Gas Storage. In: 3rd International Conference on Materials for Advanced Technologies (ICMAT2005), 3 - 8 July 2005, Singapore.

Herawan, Safarudin Gazali and Sulaiman, Mohd Yusoff (2007) CARBON ADSORBENT FOR INCREASING THE CAPACITY OF ALTERNATIVE FUELS STORAGE IN VEHICLE. In: 2nd International Engineering Convention 2007 (InTEC 2007), 10 - 14 March 2007, Jeddah, Saudi Arabia.

Herawan, Safarudin Gazali and Sulaiman, Mohd Yusoff (2008) THE COMPARISON OF LPG AND NATURAL GAS ADSORPTION CAPACITY IN CARBON ADSORBENT. In: REACH'07, 18 - 20 January 2008, Kuala Lumpur.

Herawan, Safarudin Gazali and Sulaiman, Mohd Yusoff (2006) Determination the Carbon Adsorbents Effectiveness on Adsorption and Desorption Processes of LPG. In: JSPS-VCC Group Seminar 2006, Natural Resources and Energy Environment (Group 9), 11 - 12 December 2006, UTM, Johor.

Md Kasim , Raihani and Nordin, Mohd Ridzuan (2006) Applications Of Science And Technology In Malaysian Cosmetic Industry. In: Proceeding of National Conference on Science and Its Application in Industry 2006 , 14 – 15 February 2006, Century Mahkota Hotel, Melaka. (Submitted)

Mohamad, Imran Syakir and Herawan, Safarudin Gazali and Mohd Husin, Mohd Haizal and Yusof, Ahmad Anas and Mat Tokit, Ernie (2004) THE STUDY OF LPG ADSORPTION ABILITY USING CARBON ADSORBENT TEST BED FOR CARBON ADSORBENT PREPARED FROM WASTE MATERIALS. In: Simposium Kimia Analisis Malaysia Ke 17 (SKAM-17), 24 - 26 August 2004, Kuantan, Pahang.

Nordin, Mohd Ridzuan and Kasim, Raihani and Mohd Husin , Mohd Haizal and Mohamad, Imran Syakir (2007) TECHNOLOGICAL COMPONENT AND ITS IMPACT ON THE SUCCESS OF SMI IN SKIN CARE PRODUCT. In: International Conference for Engineering and ICT (ICEI 2007) , 27-28 Nov, 2007 , Equatorial Hotel, Malacca, Malaysia .

Omar, Nooririnah and Abdullah, Rohana and Mustafa, Nuzaimah and Azhari, Muhammad azwar (2013) REVIEW ON HIGH PRESSURE COLD SPRAY (HPCS) PROCESS AS CORROSION TREATMENT FOR AGING AIRCRAFT PART. In: International conference on engineering education 2013 , 23-25/12/2013, Madinah. (Submitted)

Shaaban, Azizah (2007) The Production And Characterization Of Near Stoichiometric NdFeB-Type HDDR Powder. In: International Conference on Engineering and ICT (ICEI 2007) Engineering & ICT, Meeting the Challenges of Advanced Manufacturing Proceedings, 27-28 November 2007, Hotel Equatorial, Melaka.

Book

Mohamad, Noraiham and Mohamad Juoi, Jariah and Abd Razak, Jeefferie (2023) Green fertilizer: binder from chitosan, natural rubber & lignin. Penerbit UTeM Press, Durian Tunggal, Melaka. ISBN 9789672792727

Thesis

Abdul Hamid, Nor Nadiah (2016) Preparation And Characterization Of Natural Rubberchitson Biodegradable Urea For Slow Release Fertilizer. Masters thesis, Universiti Teknikal Malaysia Melaka.

Abu Bakar, Muhyiaddin Abdul Qadir (2014) The degradation study of PVC/ABS and PVC/ABS/Carbon blends during repeated extrusion on mechanical and thermal properties. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ahmad, Mohamad Asmadi (2014) An investigation of sodium silicate added malaccan red clay for slip casting process. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ahmad, Mohd Azhar (2014) Effect of activation conditions on the pinang frond based activated carbon performance in dyes removal. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ahmad, Mohd Shakir (2015) Additional of metal filler on graphite/carbon black/polypropylene composite as bipolar plate material for PEMFC application. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ahmad Rusli, Nurhamizah (2015) Effects of Ag on TiO2 dip-coating on unglazed ceramic substrates for anti-microbial coating. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ahmed Alqadhi, Ahmed Abdullah (2018) Design and development of an optimized mixed mode solar dryer. Masters thesis, Universiti Teknikal Malaysia Melaka.

Al-Nasrawi, Hayder Saad Oleiwi (2016) Tribological Studies Of Bio-Lubricant Under High Loading Capacity. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ali, Muhammad Syahir (2016) Pre Chamber For Performance Improvement Using Compressed Natural Gas In Single Cylinder Engine. Masters thesis, Universiti Teknikal Malaysia Melaka.

Arzmi, Muhammad Hazwan (2014) Improving die exchange process in textile manufacturing company with single minute exchange of die (SMED). Masters thesis, Universiti Teknikal Malaysia Melaka.

Azmi, Mohd Azreen (2019) Thermal Optimization Of Ice Cream Making Process : Comparison Between R134A And R404A Refrigerants. Masters thesis, Universiti Teknikal Malaysia Melaka.

Buyamin, Norsheila (2019) Effect of low temperature on the performance of carbo -based conductive ink for flexible printed circuit. Masters thesis, Universiti Teknikal Malaysia Melaka.

Habeeb, Hiyam Adil (2016) Study On The Mechanical Properties Of Natural PLA And PLA Composites Fabricated By 3D Printing. Masters thesis, Universiti Teknikal Malaysia Melaka.

Hassan, Mohd Fadli (2017) Thermal Stability Effect On Physical And Flexural Properties Of Hybrid Glass/Jute Fiber Reinforced Epoxy Composites. Masters thesis, Universiti Teknikal Malaysia Melaka.

Hassan, Najmi Aiman (2019) Physical - mechanical properties of elastomer diluted with B10 and B20 biodiesel. Masters thesis, Universiti Teknikal Malaysia Melaka.

Heng, Soo Ann (2016) Improvement of molding process scheduled downtime reduction for integrated circuits package DPAK STS. Masters thesis, Universiti Teknikal Malaysia Melaka.

Imanurezeki, Mohamad (2009) Synthesis and characterization of micropous carbon adsorbents from oil palm shell. Masters thesis, UTeM.

Jamaludin, Mohd Zaini (2018) Performance and emissions study of a single cylinder ci engine using castor oil biodiesel. Masters thesis, Universiti Teknikal Malaysia Melaka.

Jeefferie , Abdul Razak (2010) Potential application of biodegradable TS/SCFC green composite for disposable packaging food container. Other thesis, UTeM.

Johari, Nur Dalilah (2022) Characterization of brookite thin film deposited by spin coating method with green sol-gel route. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Lee, Shing Chuan (2020) Experimental Investigation Of Engine Performance And Emission Of Waste Biocompose Based Biodiesel. Masters thesis, Universiti Teknikal Malaysia Melaka.

Malek Riduan, Mohd Hafiedzzul (2014) Mechanical properties of recycled polypropylene (rPP) processed by injection molding method. Masters thesis, Universiti Teknikal Malaysia Melaka.

Md. Nafiah, Mohd Rozaini (2016) Experimental investigation of top compression piston ring morphology for hydrogen enrichment diesel engine. Masters thesis, Universiti Teknikal Malaysia Melaka.

Misran, Fatimah (2015) The effects of alumina on the dense calcium phosphate synthesized from eggshell waste. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohamad Norani, Mohamad Nordin (2019) Optimization Of A Natural Aspirated Hydrogen Diesel Engine. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohamad Yusof, Humairak (2017) The Effect Of Storage Duration And Variance Temperature On High Blend Level Biodiesel Fuel Properties. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Noh, Azhari (2023) Multi-objective optimization of bio-base grease using hybrid taguchi-grey relational analysis. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Riduan, Aizuddin Fahmi (2020) Correlation Of Ron95 And Ron97 Gasoline Properties From Various Brands Towards Engine Performance And Emission. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Sani, Siti Salmah (2015) Effect Of Injection Moulding Parameters On Warpage Deflection. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Tahir, Mohd Hirzarul Hafiz (2016) Improvement of mold ability and wire sweep in semiconductor devices using DOE statistical approach. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Zamberi, Mahani (2019) Nano Scale Mechanical Properties of Carbon Black Conductive Ink in Improving Efficiency for Electronics. Masters thesis, Universiti Teknikal Malaysia Melaka.

Muhammad, Faishal (2015) Relayout planning to reduce waste in food industry through simulation approach. Masters thesis, Universiti Teknikal Malaysia Melaka.

Narayanan, Thinakaran (2021) Physical and mechanical properties of non-treated and NaOH-treated recycled polypropylene filled dried banana leaves composites. Masters thesis, Universiti Teknikal Malaysia Melaka.

Naroh, Azmi (2019) Characteristic on electromagnetic energy harvesting using graphene/silver filled epoxy for PVT thermal hybrid solar collector. Masters thesis, Universiti Teknikal Malaysia Melaka.

Nasaruddin, Muhamad Muaz (2019) Reliability Performance Of Epoxy Based Electrically Conductive Adhesive With Varying Multiwalled Carbon Nanotube. Masters thesis, Universiti Teknikal Malaysia Melaka.

Nazan, Muhammad Afdhal (2021) Investigation Of Warping Deformation By Starch Adhesion In Fused Deposition Modelling 3D Printer. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ngah Deman, Enda Nur Malia (2018) Impact test analysis on pure and recycled HDPE materials. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ngah Nasaruddin, Afiqah (2017) Low cost natural convection solar dryer for drying durian tree wood. Masters thesis, Universiti Teknikal Malaysia Melaka.

Nik Mohamed Nasir, Nik Mohamed Syauqi (2015) Effect Of Drying Process To The Dimension Of Machined Core. Masters thesis, Universiti Teknikal Malaysia Melaka.

Norazman, Farhaneem (2018) Effect Of Acid Treated Biochar On Urea Fertilizer For Retaining Ammonium And Nitrate Ions In Soil. Masters thesis, Universiti Teknikal Malaysia Melaka.

Nur Farizan, Ayoob (2013) The Effect Of Colouring Agent (Fe2O3) On The Physical And Mechanical Properties Of Glass Ceramic Produced By Recycling Waste Glass. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ramle, Zuraimi (2017) Optimization of injection moulding parameters for recycled high density polyethylene. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ramli, Mohamad Riduan (2020) Performance And Emission Analysis On The Effect Of Various Additives In Biodieseldiesel Blend As Engine Fuels. Masters thesis, Universiti Teknikal Malaysia Melaka.

Razali, Hazlina (2014) Determining optimal process mean for small and medium juice processing industries using markovian model. Masters thesis, Universiti Teknikal Malaysia Melaka.

Rosnazri, Muhammad Hamizan (2021) The impact of HHO enrichment in single-cylinder diesel engine via simulation environment. Masters thesis, Universiti Teknikal Malaysia Melaka.

Sahrom, Amirul Hafiz (2022) Biodiesel Blending Effect On Fuel Injection Parameter Blending. Masters thesis, Universiti Teknikal Malaysia Melaka.

Se, Sian Meng (2015) Synthesis of urea impregnated ruber wood biochar for retention of nitrogenoues nutrient in soil. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Sulaiman, Muhammad Hidayat (2019) Optimization Of Injection Moulding Parameters Using Moldflow Simulation Software Analyze By Response Surface Method. Masters thesis, Universiti Teknikal Malaysia Melaka.

Sulong, Samsul Anuar (2014) Characterization of composite tiles fabricated from recycled polypropelene (rPP) and silica using hot press method. Masters thesis, Universiti Teknikal Malaysia Melaka.

Suzaim, Farah Hanum (2021) Influence of sol and deposition method in developing TiO2 brookite coatings. Masters thesis, Universiti Teknikal Malaysia Melaka.

Tan, Teng Teng (2015) Effects of curing angle on laminated unsaturated polyster epoxy composites structures. Masters thesis, Universiti Teknikal Malaysia Melaka.

Yaakob, Subhy Asyir (2021) Evaluate the filter lifetime extension and physical condition at rinses module in wet process. Masters thesis, Universiti Teknikal Malaysia Melaka.

Zainul Hashimi, Faridah (2019) Reducing Void During Transfer Moulding Of Semiconductor Plastic Package Using. Masters thesis, Universiti Teknikal Malaysia Melaka.

Zakuan, Nur Diyana (2022) Fabrication and characterization of pandanus amaryllifolius fibre reinforced thermoplastic cassava starch beeswax composites. Masters thesis, Universiti Teknikal Malaysia Melaka.

Technical Report

Ibrahim, Asriana (2012) A study of vegetale oils performance as a helical gear lubricant. [Technical Report] (Submitted)