Items where Author is "Dhar Malingam, Sivakumar"
 | Up a level |
Ali, Mohd Basri and Zainuddin, Hikmah and Muhammad Said, Nurlaela and Zakaria, Kamarul Ariffin and Dhar Malingam, Sivakumar and Abu Bakar, Mohd Hadzley and Tamin, Nor Fauzi (2024) Impact strain signal characteristics of al and mg under instrumented charpy test. Journal of Advanced Research in Applied Sciences and Engineering Technology, 42 (2). pp. 13-26. ISSN 2462-1943
Siva, Irulappasamy and Shinde, Avinash Sudam and Munde, Yashwant and Sankar, Irulappasamy and Dhar Malingam, Sivakumar (2023) Assessment of friction and wear as a function of the pressure applied to the CNT-filled silicone rubber nanocomposite pins. International Journal of Surface Science and Engineering, 17 (1). pp. 58-71. ISSN 1749-785X
Selamat, Mohd Zulkefli and Hamdan, Hamzaitul Akmarizal and Ali, Mohd Basri and Dhar Malingam, Sivakumar (2022) Flow channel dimensional accuracy of bipolat plate fabrication through milling machining process. In: Advanced Approach for Future Technology. Penerbit UTeM Press, Durian Tunggal, Melaka, pp. 37-52. ISBN 9789672454465
Ifayefunmi, Olawale Friday and Dhar Malingam, Sivakumar and Sazali, Amir Hafiz (2021) Influence of multiple load indentation on the mechanical and material behaviour of steel cone-cylinder under axial compression. Materials Research Express, 8 (12). pp. 1-10. ISSN 2053-1591
Ab Ghani, Ahmad Fuad and Ngatiman, Nor Azazi and Jumaidin, Ridhwan and Dhar Malingam, Sivakumar and Abdul Munir, Fudhail and Ranom, Rahifa (2021) Hybrid carbon/glass fiber reinforced polymer; a frontier material for aerospace industry : a review on mechanical properties enhancement. Current Science and Technology, 1 (2). pp. 41-51. ISSN 2785-8804
Selamat, Mohd Zulkefli and Jamil, Noor Ashikin and Hasan, Rafidah and Dhar Malingam, Sivakumar (2021) Effect Of carbon fiber loading in gaphite-polypropylene composite properties as bipolar plate for polymer electrolyte membrane fuel cell. Malaysian Journal of Analytical Sciences, 25 (5). pp. 766-775. ISSN 1394-2506 (Unpublished)
Razali, Nadlene and Dhar Malingam, Sivakumar and Jamadi, Aida Haryati and Mohammad Taha, Mastura and Lazim, Yusriah and Rushdan, Ahmad Ilyas (2021) Natural fibre filament for Fused Deposition Modelling (FDM): a review. International Journal of Sustainable Engineering, 14 (6). pp. 1988-2008. ISSN 1939-7038
Mohd Daud, Mohd Ahadlin and Zakaria, Kamarul Ariffin and Selamat, Mohd Zulkefli and Dhar Malingam, Sivakumar and Ab Ghani, Ahmad Fuad and Thirukumaran, Manoharan (2021) The effect of pineapple leaf fiber as a filler in polymer matrix composite for interior part in automotive. International Journal of Nanoelectronics and Materials, 14 (SI). pp. 363-372. ISSN 1985-5761
Ali, Mohd Basri and Abu Bakar, Mohd Hadzley and Tamin, Nor Fauzi and Zakaria, Kamarul Ariffin and Dhar Malingam, Sivakumar and Tan, Kevin Wei Chun and Ayop Azmi, Faiz Aswad (2021) Automatic sliding gate system using tap water pressure. Evergreen, 8 (2). pp. 408-413. ISSN 2189-0420
Subramonian, Sivarao and Abdul Khalim, Abdul Zuhair and Salleh, Mohd Shukor and Md Ali, Mohd Amran and Kadirgama, Kumaran and U.K. Dubey and Pujari, Satish and Dhar Malingam, Sivakumar (2021) Artificial neural network predictive modelling of laser micro-grooving for commercial pure titanium (CP Ti) grade 2. Journal of Mechanical Engineering, 18 (2). pp. 217-234. ISSN 1823-5514
Ng, Lin Feng and Dhar Malingam, Sivakumar and Chen, Wei Ping (2021) Mechanical characterisation of kenaf/PALF reinforced composite-metal laminates: effects of hybridisation and weaving architectures. Journal of Reinforced Plastics and Composites, 40 (5-6). pp. 193-205. ISSN 0731-6844
Dhar Malingam, Sivakumar and Mohd Ishak, Noordiana and Mansor, Muhd Ridzuan and Razali, Nadlene and Mustafa, Zaleha and Ab Ghani, Ahmad Fuad (2021) Investigation of natural fibre metal laminate as car front hood. Materials Research Express, 8 (2). pp. 1-8. ISSN 2053-1591
Mustafa, Zaleha and Tuan Nawi, Tuan Muhammad Idzuddin and Shamsudin, Zurina and Sheikh Md Fadzullah, Siti Hajar and Dhar Malingam, Sivakumar and Ratanawilai, Thanate (2021) Fatigue characteristic and Weibull analysis of sustainable rubberwood flour/recycled polypropylene composites. International Journal of Automotive and Mechanical Engineering, 18 (4). pp. 9179-9187. ISSN 2229-8649
Dhar Malingam, Sivakumar and Ng, Lin Feng and Kamarolzaman, Anita Akmar and Hong, Tzy Yi and Ab Ghani, Ahmad Fuad (2021) Mechanical characterisation of woven kenaf fabric as reinforcement for composite materials. Journal of Natural Fibers, 18 (5). pp. 653-663. ISSN 1544-0478
Dhar Malingam, Sivakumar and Mohd Ishak, Noordiana and Ng, Lin Feng and Razali, Nadlene and Ab Ghani, Ahmad Fuad and Siva, Irulappasamy (2020) Selection of materials for natural fibre metal laminates using integrated Cambridge engineering selector and Pugh method. Journal of Advanced Manufacturing Technology, 14 (3). pp. 17-32. ISSN 1985-3157
Ab Ghani, Ahmad Fuad and Ali, Mohd Basri and Dhar Malingam, Sivakumar and Mahmud, Jamaluddin (2020) Digital Image Correlation (DIC) technique in measuring strain using opensource platform Ncorr. Journal of Advanced Research in Applied Mechanics, 26 (1). pp. 10-21. ISSN 2289-7895
Ng, Lin Feng and Dhar Malingam, Sivakumar and Selamat, Mohd Zulkefli and Chen, Wei Ping (2020) Mechanical characterization of metal-composite laminates based on cellulosic kenaf and pineapple leaf fiber. Journal of Natural Fibers, 19 (6). pp. 1-13. ISSN 1544-0478 (In Press)
Dhar Malingam, Sivakumar and Ng, Lin Feng and Lee, Chun Khoon and Sheikh Md Fadzullah, Siti Hajar and Mustafa, Zaleha and Subramonian, Sivarao (2020) The influences of fibre parameters on the tensile and flexural response of lightweight thermoplastic kenaf fibre reinforced metal composites. Journal of Natural Fibers, 17 (7). pp. 966-978. ISSN 1544-0478
Ab Ghani, Ahmad Fuad and Jumaidin, Ridhwan and Hussin, Mohamed Saiful Firdaus and Dhar Malingam, Sivakumar and Abdul Munir, Fudhail and Ranom, Rahifa and Mahmud, Jamaluddin (2020) Digital Image Correlation (DIC) and Finite Element Modelling (FEM) assessment on hybrid composite carbon glass fibre under tensile and flexural loading. International Journal of Mechanical & Mechatronics Engineering, 20 (3). pp. 82-90. ISSN 2077-124X
Dhar Malingam, Sivakumar and Ng, Lin Feng and Selamat, Mohd Zulkefli and Mustafa, Zaleha and Bapokutty, Omar (2020) A comparison study on the mechanical properties of composites based on kenaf and pineapple leaf fibres. Polymer Bulletin, 77 (3). 1449 - 1463. ISSN 0170-0839
Dhar Malingam, Sivakumar and Ng, Lin Feng and Razali, Nadlene and Subramonian, Sivarao (2020) Alkali and silane treatments towards exemplary mechanical properties of kenaf and pineapple leaf fibre-reinforced composites. Journal of Bionic Engineering, 17 (2). pp. 380-392. ISSN 1672-6529
Ng, Lin Feng and Dhar Malingam, Sivakumar and Razali, Nadlene and Chen, Wei Ping (2020) Mechanical properties and water absorption of kenaf/pineapple leaf fiber-reinforced polypropylene hybrid composites. Polymer Composites, 41 (4). pp. 1255-1264. ISSN 0272-8397
Sheikh Md Fadzullah, Siti Hajar and Ramli, Siti Nur Rabiatutadawiah and Dhar Malingam, Sivakumar and Mustafa, Zaleha and Mohamad Razali, Nurul Anira Shahidah and Ismail, Ilyas (2020) Low velocity impact behaviour of pineapple leaf fibre reinforced polylactic acid biocomposites. Journal of Advanced Manufacturing Technology, 14 (1). pp. 1-12. ISSN 1985-3157
Dhar Malingam, Sivakumar and Ng, Lin Feng and Jenal, Ruztamreen and Mustafa, Zaleha and Subramonian, Sivarao (2020) A review of the tensile and fatigue responses of cellulosic fibre-reinforced polymer composites. Mechanics Of Advanced Materials and Structures, 27 (8). pp. 645-660. ISSN 1537-6494
Mustafa, Zaleha and Idrus, Noriqman Hakimi and Abu Bakar, Mohd Hadzley and Mohamad Yatim, Norazlina and Dhar Malingam, Sivakumar and Sheikh Md Fadzullah, Siti Hajar and Anjang Ab Rahman, Aslina and Thongkaew, Kunlapat (2020) Optimization of drilling process parameters on delamination factor of Jute reinforced unsaturated polyester composite using Box-Behnken design of experiment. Journal of Mechanical Engineering and Sciences (JMES), 14 (1). pp. 6295-6303. ISSN 2289-4659
Dhar Malingam, Sivakumar and Ng, Lin Feng and Subramaniam, Kathiravan and Pilvamangalam, Nisallini and Bapokutty, Omar and Ab Ghani, Ahmad Fuad (2020) Charpy impact response of fibre-metal laminates based on woven kenaf/glass fibre reinforced polypropylene. International Journal on Engineering Applications, 8 (2). pp. 58-63. ISSN 2281-2881
Ab Ghani, Ahmad Fuad and Ramli, Mohd Irman and Jumaidin, Ridhwan and Dhar Malingam, Sivakumar and Abdul Munir, Fudhail and Yob, Mohd Shukri (2020) Parametric study on volume fraction of Representative Volume Element (RVE) CFRP AND GFRP towards tensile properties. Malaysian Journal of Applied Sciences, 5 (2). pp. 17-29. ISSN 0127-9246
Ng, Lin Feng and Dhar Malingam, Sivakumar and Subramaniam, Kathiravan and Selamat, Mohd Zulkefli and Woo, Xiu Juan (2020) The investigation of the tensile and quasi-static indentation properties of pineapple leaf / kevlar fibre reinforced hybrid composites. Defence S and T Technical Bulletin, 13 (1). pp. 117-129. ISSN 1985-6571
Dhar Malingam, Sivakumar and Zulkafli, Norizzati and Sheikh Md Fadzullah, Siti Hajar and Razali, Nadlene (2019) Quasi and dynamic impact performance of hybrid cross-ply banana/glass fibre reinforced polypropylene composites. Materials Research Express, 6 (12). pp. 1-9. ISSN 2053-1591
Dhar Malingam, Sivakumar and Subramaniam, Kathiravan and Ng, Lin Feng and Sheikh Md Fadzullah, Siti Hajar and Subramonian, Sivarao (2019) Mechanical properties of plain woven kenaf/glass fiber reinforced polypropylene hybrid composites. Materialpruefung/Materials Testing, 61 (11). pp. 1095-1100. ISSN 0025-5300
Ng, Lin Feng and Dhar Malingam, Sivakumar and Subramaniam, Kathiravan and Woo, Xiu Juan and Siva, Irulappasamy (2019) The effects of bonding temperature and surface roughness on the shear strength of bonded aluminium laminates using polypropylene based adhesive. Journal of Advanced Manufacturing Technology, 13 (2). pp. 113-127. ISSN 1985-3157
Dhar Malingam, Sivakumar and Zulkafli, Norizzati and Sheikh Md Fadzullah, Siti Hajar and Zakaria, Kamarul Ariffin and Mustafa, Zaleha and Subramonian, Sivarao (2019) Effect of water absorption on the mechanical properties of cross-ply hybrid pseudo- stem banana/glass fibre reinforced polypropylene composite. Materials Research Express, 6 (9). pp. 1-13. ISSN 2053-1591
Dhar Malingam, Sivakumar and Ng, Lin Feng and Selamat, Mohd Zulkefli and Mustafa, Zaleha and Bapokutty, Omar (2019) A comparison study on the mechanical properties of composites based on kenaf and pineapple leaf fibres. Polymer Bulletin, 77 (3). pp. 1449-1463. ISSN 0170-0839
Mohd Daud, Mohd Ahadlin and Md Zahir, Nur Aizatul ‘Ain and Dhar Malingam, Sivakumar and Mansor, Muhd Ridzuan and Ab Ghani, Ahmad Fuad (2019) Optimisation of hybrid composite reinforced carbon and glass using AHP method. Defence S and T Technical Bulletin, 12 (1). pp. 101-112. ISSN 1985-6571
Dhar Malingam, Sivakumar and Ng, Lin Feng and Subramaniam, Kathiravan and Selamat, Mohd Zulkefli and Ali, Mohd Basri and Bapokutty, Omar (2019) The influence of fibre stacking configurations on the indentation behaviour of pineapple leaf / glass fibre reinforced hybrid composites. Defence S and T Technical Bulletin, 12 (1). pp. 113-123. ISSN 1985-6571
Subramonian, Sivarao and Jayahkundy, Raguvaran and Ali, Aidy and Abdullah, Mohamad Faizal and Dhar Malingam, Sivakumar and Md Ali, Mohd Amran and Arep @ Ariff, Hambali and Salleh, Mohd Shukor and Vates, Umesh Kumar (2019) Investigation of tyre pressure drop phenomenon using specially designed real-time data mining and storage system. International Journal of Recent Technology and Engineering, 7 (5S4). pp. 533-537. ISSN 2277-3878
Dhar Malingam, Sivakumar and Subramaniam, Kathiravan and Ng, Lin Feng and Bapokutty, Omar (2019) The effects of stacking configuration on the response of tensile and quasi-static penetration to woven kenaf/glass hybrid composite metal laminate. Polymer Composites, 40 (2). pp. 568-577. ISSN 0272-8397
Mohammad, Muhammad Azrain and Mansor, Muhd Ridzuan and Omar, Ghazali and Sheikh Md Fadzullah, Siti Hajar and Dhar Malingam, Sivakumar and Nordin, Mohd Nur Azmi and Esa, Siti Rahmah (2019) Effect of high thermal stress on the organic light emitting diodes (OLEDs) performances. Synthetic Metals, 247. pp. 191-201. ISSN 0379-6779
Dhar Malingam, Sivakumar and Subramonian, Sivarao and Selamat, Mohd Zulkefli and Sheikh Md Fadzullah, Siti Hajar and Ab Ghani, Ahmad Fuad and Zulkafli, Norizzati (2019) Formulation of physio-mechanical properties towards enhancing hybrid banana kenaf reinforced bio-composites. [Technical Report] (Submitted)
Dhar Malingam, Sivakumar and Zulkafli, Norizzati and Sheikh Md Fadzullah, Siti Hajar and Mustafa, Zaleha and Zakaria, Kamarul Ariffin and Subramonian, Sivarao (2019) Mechanical properties of cross-ply banana-glass fibre reinforced polypropylene composites. Defence S and T Technical Bulletin, 12 (1). pp. 124-135. ISSN 1985-6571
Jimit, Roy Hanson and Zakaria, Kamarul Ariffin and Bapokutty, Omar and Dhar Malingam, Sivakumar (2018) Tensile and fatigue behaviour of glass fibre reinforced polyester composites. International Journal Of Engineering And Technology, 7 (3.17). pp. 25-27. ISSN 2227-524X
Dhar Malingam, Sivakumar and Subramaniam, Kathiravan and Ng, Lin Feng and Ali, Mohd Basri and Selamat, Mohd Zulkefli and Bapokutty, Omar and Subramonian, Sivarao (2018) Experimental investigation on Charpy impact response of kenaf bast fibre reinforced metal laminate system. ARPN Journal of Engineering and Applied Sciences, 13 (3). pp. 822-827. ISSN 1819-6608
Mohammad, Muhammad Azrain and Mansor, Muhd Ridzuan and Sheikh Md Fadzullah, Siti Hajar and Omar, Ghazali and Dhar Malingam, Sivakumar and Nordin, Mohd Nur Azmi and Lim, L. M. (2018) Analysis of mechanisms responsible for the formation of dark spots in organic light emitting diodes (OLEDs): a review. Synthetic Metals, 235. pp. 160-175. ISSN 0379-6779
Zakaria, Kamarul Ariffin and Idris, Mohamad Iqmal Faris and Dhar Malingam, Sivakumar and Salleh, Suhaila and Sanusi, Nortazi and Mohd Daud, Mohd Ahadlin (2018) Fatigue strain signal characteristic and damage of automobile suspension system. ARPN Journal of Engineering and Applied Sciences, 13 (1). pp. 221-225. ISSN 1819-6608
Dhar Malingam, Sivakumar and Mohd Amman, Rosmia and Samekto, Haryanti and Mohd Ab Halim, Mohd Firdaus and Abu Shah, Ismail and Sulaiman, Saiful Naim and Subramonian, Sivarao (2018) Influences of draw forming process on the crash analysis of a circular cup. Journal of Advanced Manufacturing Technology (JAMT), 12 (1(2)). pp. 547-559. ISSN 1985-3157
Dhar Malingam, Sivakumar and Ng, Lin Feng and Jenal, Ruztamreen and Mustafa, Zaleha and Subramonian, Sivarao (2018) A review of the tensile and fatigue responses of cellulosic fibre-reinforced polymer composites. Mechanics Of Advanced Materials and Structures, 27 (8). pp. 1-16. ISSN 1537-6494
Abdul Munir, Fudhail and Sukri, Muhammad Izzat Syazwan and Syahrial, Fadhli and Roseli, Adnan and Dhar Malingam, Sivakumar and Hassan, Muhammad Zahir (2017) Design of engine mounting for single seated educational racing vehicle. ARPN Journal of Engineering and Applied Sciences, 12 (24). pp. 7348-7351. ISSN 1819-6608
Ng, Lin Feng and Dhar Malingam, Sivakumar and Zakaria, Kamarul Ariffin and Bapokutty, Omar and Subramonian, Sivarao (2017) Influence of kenaf fibre orientation effect on the mechanical properties of hybrid structure of fibre metal laminate. Pertanika Journal of Science & Technology, 25 (S5). pp. 1-8. ISSN 0128-7680
Dhar Malingam, Sivakumar and Ng, Lin Feng and Subramaniam, Kathiravan and Ab Ghani, Ahmad Fuad and Jumaat, Faizal Azli (2017) Tensile And Impact Properties Of Cost-Effective Hybrid Fiber Metal Laminate Sandwich Structures. Advances in Polymer Technology, 37 (7). pp. 2385-2393. ISSN 0730-6679
Dhar Malingam, Sivakumar and Mohd Ishak, Noordiana and Mansor, Muhd Ridzuan (2017) Thermoplastic matrix selection for fibre metal laminate using fuzzy VIKOR and entropy measure for objective weighting. Journal of Engineering Science and Technology, 12 (10). pp. 2792-2804. ISSN 2792 - 2804
Mohd Ishak, Noordiana and Dhar Malingam, Sivakumar and Mansor, Muhd Ridzuan (2017) Weighting of natural fibre criteria for fibre metal laminate using entropy method for car front hood utilization. Key Engineering Materials, 740. pp. 75-80. ISSN 1662-9795
Selamat, Mohd Zulkefli and Sahadan, Siti Norbaya and Dhar Malingam, Sivakumar and Sudiana, Yayan and Mohamad, Noraiham (2017) Epoxy/carbon black/graphite composite bipolar plate prepared by high speed mixing technique. Proceedings Of Mechanical Engineering Research Day 2017. pp. 410-412. ISSN -
T. Subramaniam, Ramesh and Karuppiah, Rajammal and Kasi, Ramesh and Dhar Malingam, Sivakumar and Duraisamy, Navaneethan (2017) Influences of sintering temperatures and crystallite sizes on electrochemical properties of LiNiPO4 as cathode materials via sol–gel route for lithium ion batteries. Journal of Sol-Gel Science and Technology, 83 (1). pp. 12-18. ISSN 0928-0707
Dhar Malingam, Sivakumar and Ng, Lin Feng and Lau, S. M. and Lim, K. T. (2017) Fatigue life behaviour of glass/kenaf woven-ply polymer hybrid biocomposites. Journal of Polymers and the Environment, 26 (2). pp. 499-507. ISSN 1566-2543
Duraisamy, Navaneethan and Karuppiah, Rajammal and Kasi, Ramesh and T. Subramaniam, Ramesh and Dhar Malingam, Sivakumar (2017) Na-doped LiMnPO4 as an electrode material for enhanced lithium ion batteries. Bulletin of Materials Science, 40 (1). pp. 171-175. ISSN 0250-4707
Ng, Lin Feng and Dhar Malingam, Sivakumar and Zakaria, Kamarul Ariffin and Selamat, Mohd Zulkefli (2017) Fatigue performance of hybrid fibre metal laminate structure. International Review of Mechanical Engineering, 11 (1). pp. 61-68. ISSN 1970-8734
Dhar Malingam, Sivakumar and Selamat, Mohd Zulkefli and Subramonian, Sivarao (2017) Investigation on Fatigue Life Behaviour of Sustainable Bio-Based Fibre Metal Laminate. Journal of Mechanical Engineering, SI 1 (1). pp. 123-140. ISSN 1823-5514
Dhar Malingam, Sivakumar and Pilvamangalam, Nisallini and Bapokutty, Omar and Selamat, Mohd Zulkefli and Subramonian, Sivarao (2017) Quasi-static indentation behaviour of kenaf bast fibre reinforced metal laminate system. Defence S &T Technical Bulletin, 10 (3). pp. 258-271. ISSN 1985-6571 (Submitted)
Mohd Amman, Rosmia and Halim, Mohd Faizal and Dhar Malingam, Sivakumar and Abu Shah, Ismail (2016) Influences of thickness and geometrical change from draw forming in quasi-static axial compression simulation. International Review on Modelling & Simulations, 9 (6). pp. 442-449. ISSN 1974-9821
Ali, Aidy and Subramonian, Sivarao and Md Ali, Mohd Amran and Dhar Malingam, Sivakumar and Salleh, Mohd Shukor and Raja Abdullah, Raja Izamshah (2016) Performance evaluation of reworked weld joints. International Journal of Engineering and Technologies, 9. pp. 5-12. ISSN 2297-623X
Ali, Aidy and Subramonian, Sivarao and Amran, Mohammad and Dhar Malingam, Sivakumar and Salleh, Mohd Shukor and Raja Abdullah, Raja Izamshah (2016) Effect of fiber loading on the mechanical properties of bagasse fiber–reinforced polypropylene composites. Advances in Mechanical Engineering, 8 (8). pp. 1-5. ISSN 1687-8132
Ali, Aidy and Subramonian, Sivarao and Amran, Mohammad and Dhar Malingam, Sivakumar and Salleh, Mohd Shukor and Raja Abdullah, Raja Izamshah (2016) Effect of fiber loading on the mechanical properties of bagasse fiber–reinforced polypropylene composites. Advances In Mechanical Engineering, 8 (8). pp. 1-5. ISSN 1687-8132
Selamat, Mohd Zulkefli and Razi, Mashitah and Kasim, Ayu Natasya and Dhar Malingam, Sivakumar and Putra, Azma and Yaakob, Mohd Yuhazri and Mohd Daud, Mohd Ahadlin (2016) Mechanical properties of starch composite reinforced by pineapple leaf fiber (PLF) from josapine cultivar. ARPN Journal of Engineering and Applied Sciences, 11 (16). pp. 9783-9788. ISSN 1819-6608
Kasim, Ayu Natasya and Selamat, Mohd Zulkefli and Mohd Daud, Mohd Ahadlin and Yaakob, Mohd Yuhazri and Putra, Azma and Dhar Malingam, Sivakumar (2016) Mechanical properties of polypropylene composites reinforced with alkaline treated pineapple leaf fibre from Josapine cultivar. International Journal of Automotive and Mechanical Engineering (IJAME), 13 (1). pp. 3157-3167. ISSN 2229-8649
Mohd Zalani, Naziatul Fazilah and Dhar Malingam, Sivakumar and Selamat, Mohd Zulkefli (2016) Tensile properties of woven kenaf fiber reinforced polypropylene hybrid aluminium-composite. ARPN Journal Of Engineering And Applied Sciences, 11 (12). pp. 7823-7827. ISSN 1819-6608
Dhar Malingam, Sivakumar and Subramaniam, Kathiravan and Selamat, Mohd Zulkefli and Said, Md Radzai and Subramonian, Sivarao (2016) A study on impact behaviour of a novel oil palm fibre reinforced metal laminate system. ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2483-2488. ISSN 1819-6608
Dhar Malingam, Sivakumar and Subramaniam, Kathiravan and Selamat, Mohd Zulkefli and Said, Md Radzai and Subramonian, Sivarao (2016) A study on impact behaviour of a novel oil palm fibre reinforced metal laminate system. ARPN Journal Of Engineering And Applied Sciences, 11 (4). pp. 2483-2488. ISSN 1819-6608
Dhar Malingam, Sivakumar and Che Mahzan, Muhammad ‘Ammar and Said, Md Radzai and Rivai, Ahmad and Nordin, Mohd Nur Azmi and Selamat, Mohd Zulkefli and Subramonian, Sivarao (2015) V-bend die forming performance of oil palm fiber composite. Applied Mechanics and Materials, 699. pp. 59-63. ISSN 1660-9336
Nasir, Nurulhilmi Zaiedah and Mohd Daud, Mohd Ahadlin and Selamat, Mohd Zulkefli and Rivai, Ahmad and Dhar Malingam, Sivakumar (2015) The effect of heat treatment on fatigue and mechanical properties of 6061 aluminium alloy. Applied Mechanics and Materials, 699. pp. 227-232. ISSN 1660-9336
Subramonian, Sivarao and Dimin @ Mohd Amin, Mohd Fairuz and Faris N. M. F. and Arep @ Ariff, Hambali and Dhar Malingam, Sivakumar and Salit, Mohd Sapuan (2014) Analytical hierarchy process for design selection of micro hot-marking tool. Applied Mechanics and Materials, 699. pp. 897-902. ISSN 1660-9336
Sivarao, Subramonian and Dimin @ Mohd Amin, Mohd Fairuz and Faris N. M. F. and Arep @ Ariff, Hambali and Dhar Malingam, Sivakumar and Salit, Mohd Sapuan (2013) Analytical hierarchy process for design selection of micro hot-marking tool. In: 3rd International Conference and Exhibition on Sustainable Energy and Advanced Material, 30-31 October 2013, Melaka, Malaysia.
Tan, Chee Fai and Sarban Singh, Ranjit Singh and Karjanto, Juffrizal and Md. Yusof, Nidzamuddin and Khalil, Siti Nurhaida and Dhar Malingam, Sivakumar and E.S. Ng and Chen, Wei and Rauterberg, Matthias and Lim, Danny Thiam Lai (2013) Conceptual design for multi terrain mobile robot. Australian Journal of Basic and Applied Sciences, 7 (12). pp. 300-308. ISSN 1991-8178
Tan, Chee Fai and Alkahari, Mohd Rizal and Said, Md Radzai and Dhar Malingam, Sivakumar and Liew, S. M. and Chen, Wei and Rauterberg, G. W. Matthias and Sarban Singh, Ranjit Singh and Subramonian, Sivarao (2013) Fire fighting mobile robot: state of the art and recent development. Australian Journal of Basic and Applied Sciences, 7 (10). pp. 220-230. ISSN 1991-8178
Dhar Malingam, Sivakumar and Kalyanasundaram, Shankar (2013) Temperature effect on forming of self- reinforced polypropylene based lightweight metal composite structure. Journal of Engineering and Technology, 4 (1). pp. 147-157. ISSN 2180-3811
Dhar Malingam, Sivakumar and Kalyanasundaram, Shankar (2013) Temperature effect on forming of self- reinforced polypropylene based lightweight metal composite structure. Journal of Engineering and Technology, 4 (1). pp. 147-157. ISSN 2180-3811