Items where Author is "Subramonian, Sivarao"
 | Up a level |
Article
Subramonian, Sivarao and Zurghiba, Hizarhuda and Kadirgama, Kumaran and Sazali, Norazlianie and Mat Noor, Muhammad and Abu Bakar, Rosli and Yusaf, Talal and Alsalman, Ali and Chong, Tak Yaw and Koh, Siaw Paw and Tiong, Sieh Kiong and Benedict, Foo (2024) Exploring the potentials of Copper Oxide and CNC Nanocoolants. Journal Of Advanced Research In Applied Sciences And Engineering Technology, 34 (2). pp. 315-326. ISSN 2462-1943
Subramonian, Sivarao and Samylingam, Lingenthiran and Kok, Chee Kuang and Liew, Kia Wai and Aslfattahi, Navid and Schmirler, Michal and Kadirgama, Kumaran and Ramasamy, Devarajan and Wan Harun, Wan Sharuzi and Samykano, Mahendran and Sazali, Norazlianie and Veerendra, Arigela Satya and Semin (2024) Enhancing lubrication efficiency and wear resistance in mechanical systems through the application of nanofluids: A comprehensive review. Journal of Advanced Research in Micro and Nano Engineering, 16 (1). pp. 1-18. ISSN 2756-8210
Kadirgama, Kumaran and Subramonian, Sivarao and Salleh, Mohd Shukor and Lee, Sara Kit Yee and Ramasamy, Devarajan and Mohamed Kassim, Anuar and U. K. Vatesh and Satish, Pujari and Dharsyanth R. (2024) Advancements in additive manufacturing: Innovations in direct ink writing materials and their transformative practical applications. Journal of Engineering Science and Technology, 19 (1). pp. 246-275. ISSN 1823-4690
Subramonian, Sivarao and Karunamurthi, Lavanyaa and Lee, Sara Kit Yee and Kadirgama, Kumaran and Arep @ Ariff, Hambali and Rao, Dharsyanth and Salleh, Mohd Shukor and Ramasamy, Devarajan (2024) TRIZ and Pugh method analysis towards Conceptualizing a novel modular airless tyre. International Review of Mechanical Engineering, 18 (2). pp. 54-62. ISSN 1970 - 8734
Kadirgama, Kumaran and Zurghiba, Hizanorhuda and Sazali, Norazlianie and Mat Noor, Muhamad and Abu Bakar, Rosli and Subramonian, Sivarao and Yusaf, Talal and Chong, Tak Yaw and Koh, Siaw Paw and Tiong, Sieh Kiong and Benedict, Foo (2023) Enhancing heat transfer in compact automotive engines using hybrid nano coolants. Journal Of Advanced Research In Applied Sciences And Engineering Technology, 32 (2). pp. 314-326. ISSN 2462-1943
Subramonian, Sivarao and Salleh, Mohd Shukor and Kadirgama, Kumaran and Al-Obaidi, Abdulkareem Sh. Mahdi and Vatesh, Umesh Kumar and Pujari, Satish and Rao, Dharsyanth and Ramasamy, Devarajan (2023) Artificial neural network performance modeling and evaluation of additive manufacturing 3D printed parts. Engineering, Technology & Applied Science Research, 13. pp. 11677-11684. ISSN 2241-4487
Pujari, Satish and Kumar, Sattaru Santosh and S. Naveen, Nambala and Devi, Chinta Neelima and Subramonian, Sivarao (2023) Effect of magnetite on physical, tribological and magnetic characteristics of kenaf fibre. Emerging Materials Research, 12 (2). pp. 196-203. ISSN 2046-0147
Md Ali, Mohd Amran and Mohd Ali, Noorfa Idayu and Salleh, Mohd Shukor and Abdullah, Muhammad Ilman Hakimi Chua and Subramonian, Sivarao and Yamaguchi, Masayuki (2023) Optimization of compression moulding parameters on mechanical properties of stainless steel 316L. Journal of Advanced Manufacturing Technology (JAMT), 17 (1). pp. 47-58. ISSN 1985-3157
Subramonian, Sivarao and Kumaran, K. and Dharsyanth, R. and Md Ali, Mohd Amran and Salleh, Mohd Shukor and Pujari, Satish and Ramasamy, Devarajan and Vatesh, Umesh Kumar and Mahdi Al-Obaidi, Abdulkareem Sh and Ramesh, S. and Lee, Kit Yee Sara (2023) Predictive modeling of dimensional accuracies in 3D printing using artificial neural network. Journal Of Engineering Science And Technology, 18 (4). pp. 2148-2160. ISSN 1823-4690
Salleh, Mohd Shukor and Wakhi Anuar, Nur Farah Bazilah and Yahaya, Saifudin Hafiz and Omar, Mohd Zaidi and Ali, Mohd Azamuddin and Subramonian, Sivarao (2022) Characteristics of A1Si7Mg0.3/X-GNPs composites manufactured via stir casting method. Journal Of Advanced Manufacturing Technology (JAMT), 16 (2). pp. 29-40. ISSN 1985-3157
Yusaf, Talal and Faisal Mahamude, Abu Shadate and Kamarulzaman, Muhamad Kamal and Wan Harun, Wan Sharuzi and Kadirgama, Kumaran and Ramasamy, Devarajan and Farhana, Kaniz and Abu Bakar, Rosli and Subramonian, Sivarao and Yousif, Belal (2022) A comprehensive review on efficiency enhancement of solar collectors using hybrid nanofluids. Energies, 15 (4). pp. 1-26. ISSN 1996-1073
Yahaya, Saifudin Hafiz and Subramonian, Sivarao and Salleh, Mohd Shukor and Satish, Pujari and Kadirgama, Kumaran (2021) Importance Of Knowledge-Attitude-Practice To Enhance University Technology Transfer. Journal of Advanced Manufacturing Technology, 15 (2). pp. 71-82. ISSN 1985-3157
Subramonian, Sivarao and Abdul Khalim, Abdul Zuhair and Salleh, Mohd Shukor and Md Ali, Mohd Amran and Kadirgama, Kumaran and U.K. Dubey and Pujari, Satish and Dhar Malingam, Sivakumar (2021) Artificial neural network predictive modelling of laser micro-grooving for commercial pure titanium (CP Ti) grade 2. Journal of Mechanical Engineering, 18 (2). pp. 217-234. ISSN 1823-5514
Md Ali, Mohd Amran and Mohd Ali, Noorfa Idayu and Abdullah, Zulkeflee and Subramonian, Sivarao and Abdul Aziz, Mohd Sanusi and Wan Muhammad, Wan Nur Azrina and Abu Bakar, Mohd Hadzley and Wakhi Anuar, Nur Farah Bazilah (2021) Fill Time Optimization Analysis In Flow Simulation Of Injection Molding Using Response Surface Method. Malaysian Journal on Composites Science and Manufacturing, 4 (1). pp. 28-39. ISSN 2716-6945
Dhar Malingam, Sivakumar and Ng, Lin Feng and Lee, Chun Khoon and Sheikh Md Fadzullah, Siti Hajar and Mustafa, Zaleha and Subramonian, Sivarao (2020) The influences of fibre parameters on the tensile and flexural response of lightweight thermoplastic kenaf fibre reinforced metal composites. Journal of Natural Fibers, 17 (7). pp. 966-978. ISSN 1544-0478
Dhar Malingam, Sivakumar and Ng, Lin Feng and Razali, Nadlene and Subramonian, Sivarao (2020) Alkali and silane treatments towards exemplary mechanical properties of kenaf and pineapple leaf fibre-reinforced composites. Journal of Bionic Engineering, 17 (2). pp. 380-392. ISSN 1672-6529
Dhar Malingam, Sivakumar and Ng, Lin Feng and Jenal, Ruztamreen and Mustafa, Zaleha and Subramonian, Sivarao (2020) A review of the tensile and fatigue responses of cellulosic fibre-reinforced polymer composites. Mechanics Of Advanced Materials and Structures, 27 (8). pp. 645-660. ISSN 1537-6494
ANUAR BIN MOHAMED KASSIM, ANUAR BIN MOHAMED KASSIM and Mohamad Termezai, Mohd Faiz Najmuddin and Awangku Jaya, Awangku Khairurahman and Azahar, Arman Hadi and Subramonian, Sivarao and Jafar, Fairul Azni and Jaafar, Hazriq Izzuan and Mohd Aras, Mohd Shahrieel (2020) Design And Development Of Autonomous Pesticide Sprayer Robot For Fertigation Farm. International Journal of Advanced Computer Science and Applications, 11 (2). pp. 545-551. ISSN 2158-107X
Salleh, Mohd Shukor and Abd Rahman, Ammar and Othman, Intan Sharhida and Subramonian, Sivarao and Yahaya, Saifudin Hafiz and Siswanto, Nurhadi (2019) Investigation Of Wear And Corrosion Characteristics Of Short Heat Treated Thixoformed Aluminium Alloy. Journal of Advanced Manufacturing Technology, 13 (3). pp. 101-113. ISSN 1985-3157
Dhar Malingam, Sivakumar and Subramaniam, Kathiravan and Ng, Lin Feng and Sheikh Md Fadzullah, Siti Hajar and Subramonian, Sivarao (2019) Mechanical properties of plain woven kenaf/glass fiber reinforced polypropylene hybrid composites. Materialpruefung/Materials Testing, 61 (11). pp. 1095-1100. ISSN 0025-5300
Mohamed Kassim, Anuar and Awangku Jaya, Awangku Khairul Ridzwan and Azahar, Arman Hadi and Jaafar, Hazriq Izzuan and Subramonian, Sivarao and Jafar, Fairul Azni and Mohd Aras, Mohd Shahrieel (2019) Performance Analysis Of Acceleration Sensor For Movement Detection In Vehicle Security System. International Journal of Advanced Computer Science and Applications, 10 (10). pp. 395-401. ISSN 2158-107X
Dhar Malingam, Sivakumar and Zulkafli, Norizzati and Sheikh Md Fadzullah, Siti Hajar and Zakaria, Kamarul Ariffin and Mustafa, Zaleha and Subramonian, Sivarao (2019) Effect of water absorption on the mechanical properties of cross-ply hybrid pseudo- stem banana/glass fibre reinforced polypropylene composite. Materials Research Express, 6 (9). pp. 1-13. ISSN 2053-1591
Subramonian, Sivarao and Jayahkundy, Raguvaran and Ali, Aidy and Abdullah, Mohamad Faizal and Dhar Malingam, Sivakumar and Md Ali, Mohd Amran and Arep @ Ariff, Hambali and Salleh, Mohd Shukor and Vates, Umesh Kumar (2019) Investigation of tyre pressure drop phenomenon using specially designed real-time data mining and storage system. International Journal of Recent Technology and Engineering, 7 (5S4). pp. 533-537. ISSN 2277-3878
Dhar Malingam, Sivakumar and Zulkafli, Norizzati and Sheikh Md Fadzullah, Siti Hajar and Mustafa, Zaleha and Zakaria, Kamarul Ariffin and Subramonian, Sivarao (2019) Mechanical properties of cross-ply banana-glass fibre reinforced polypropylene composites. Defence S and T Technical Bulletin, 12 (1). pp. 124-135. ISSN 1985-6571
Salleh, Mohd Shukor and Mohamad Ishak, Nurul Naili and Yahaya, Saifudin Hafiz and Subramonian, Sivarao and Abdullah, A. (2018) Effect Of Equal Channel Angular Pressing On The Microstructure And Mechanical Properties Of A356 Alloy. Journal Of Advanced Manufacturing Technology, 12. pp. 23-39. ISSN 1985-3157
Dhar Malingam, Sivakumar and Subramaniam, Kathiravan and Ng, Lin Feng and Ali, Mohd Basri and Selamat, Mohd Zulkefli and Bapokutty, Omar and Subramonian, Sivarao (2018) Experimental investigation on Charpy impact response of kenaf bast fibre reinforced metal laminate system. ARPN Journal of Engineering and Applied Sciences, 13 (3). pp. 822-827. ISSN 1819-6608
Dhar Malingam, Sivakumar and Mohd Amman, Rosmia and Samekto, Haryanti and Mohd Ab Halim, Mohd Firdaus and Abu Shah, Ismail and Sulaiman, Saiful Naim and Subramonian, Sivarao (2018) Influences of draw forming process on the crash analysis of a circular cup. Journal of Advanced Manufacturing Technology (JAMT), 12 (1(2)). pp. 547-559. ISSN 1985-3157
Dhar Malingam, Sivakumar and Ng, Lin Feng and Jenal, Ruztamreen and Mustafa, Zaleha and Subramonian, Sivarao (2018) A review of the tensile and fatigue responses of cellulosic fibre-reinforced polymer composites. Mechanics Of Advanced Materials and Structures, 27 (8). pp. 1-16. ISSN 1537-6494
Ng, Lin Feng and Dhar Malingam, Sivakumar and Zakaria, Kamarul Ariffin and Bapokutty, Omar and Subramonian, Sivarao (2017) Influence of kenaf fibre orientation effect on the mechanical properties of hybrid structure of fibre metal laminate. Pertanika Journal of Science & Technology, 25 (S5). pp. 1-8. ISSN 0128-7680
Sivakumar, Dhar Malingam and Selamat, Mohd Zulkefli and Subramonian, Sivarao (2017) Failure Analysis of Hybrid Fibre Reinforced Plastics for Bolted Joint under Thermal Effect. Journal of Mechanical Engineering, SI 1 (1). pp. 141-156. ISSN 1823-5514
Md Ali, Mohd Amran and Mohd Ali, Noorfa Idayu and Abdullah, Zulkeflee and Abu Bakar, Mohd Hadzley and Subramonian, Sivarao and Abdul Aziz, Mohd Sanusi and Abdullah, Abu (2017) Interchangeable Core And Cavity Plates For Two-Plate Family Injection Mould. Journal Of Mechanical Engineering And Sciences (JMES), 11 (3). pp. 2815-2824. ISSN 2289-4659
Dhar Malingam, Sivakumar and Selamat, Mohd Zulkefli and Subramonian, Sivarao (2017) Investigation on Fatigue Life Behaviour of Sustainable Bio-Based Fibre Metal Laminate. Journal of Mechanical Engineering, SI 1 (1). pp. 123-140. ISSN 1823-5514
Safian, Mohd Azizul Hikmi and Salleh, Mohd Shukor and Subramonian, Sivarao and Hussein, Nur Izan Syahriah and Sulaiman, Mohd Amri and Yahaya, Saifudin Hafiz (2017) Production Of LM4 Feedstock For Thixoforming By Using Cooling Slope Casting. Journal Of Advanced Manufacturing Technology (JAMT) , 11 (1). pp. 77-90. ISSN 1985-3157
Dhar Malingam, Sivakumar and Pilvamangalam, Nisallini and Bapokutty, Omar and Selamat, Mohd Zulkefli and Subramonian, Sivarao (2017) Quasi-static indentation behaviour of kenaf bast fibre reinforced metal laminate system. Defence S &T Technical Bulletin, 10 (3). pp. 258-271. ISSN 1985-6571 (Submitted)
Subramonian, Sivarao and Sivakumar, Dhar Malingam (2016) Performance Evaluation of Reworked Weld Joints. International Journal of Engineering and Technologies, 9. pp. 5-12. ISSN 2297-623X
Ali, Aidy and Subramonian, Sivarao and Md Ali, Mohd Amran and Dhar Malingam, Sivakumar and Salleh, Mohd Shukor and Raja Abdullah, Raja Izamshah (2016) Performance evaluation of reworked weld joints. International Journal of Engineering and Technologies, 9. pp. 5-12. ISSN 2297-623X
Ali, Aidy and Subramonian, Sivarao and Amran, Mohammad and Dhar Malingam, Sivakumar and Salleh, Mohd Shukor and Raja Abdullah, Raja Izamshah (2016) Effect of fiber loading on the mechanical properties of bagasse fiber–reinforced polypropylene composites. Advances In Mechanical Engineering, 8 (8). pp. 1-5. ISSN 1687-8132
Ali, Aidy and Subramonian, Sivarao and Amran, Mohammad and Dhar Malingam, Sivakumar and Salleh, Mohd Shukor and Raja Abdullah, Raja Izamshah (2016) Effect of fiber loading on the mechanical properties of bagasse fiber–reinforced polypropylene composites. Advances in Mechanical Engineering, 8 (8). pp. 1-5. ISSN 1687-8132
Dhar Malingam, Sivakumar and Subramaniam, Kathiravan and Selamat, Mohd Zulkefli and Said, Md Radzai and Subramonian, Sivarao (2016) A study on impact behaviour of a novel oil palm fibre reinforced metal laminate system. ARPN Journal Of Engineering And Applied Sciences, 11 (4). pp. 2483-2488. ISSN 1819-6608
Dhar Malingam, Sivakumar and Subramaniam, Kathiravan and Selamat, Mohd Zulkefli and Said, Md Radzai and Subramonian, Sivarao (2016) A study on impact behaviour of a novel oil palm fibre reinforced metal laminate system. ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2483-2488. ISSN 1819-6608
Anuar , Mohamed Kassim and Takashi , Yasuno and Hiroshi, Suzuki and Mohd Aras, Mohd Shahrieel and Jaafar, Hazriq Izzuan and Jafar, Fairul Azni and Subramonian, Sivarao (2016) Conceptual Design And Implementation Of Electronic Spectacle Based Obstacle Detection For Visually Impaired Persons. JOURNAL OF ADVANCED MECHANICAL DESIGN, SYSTEMS, AND MANUFACTURING, 10 (7). pp. 1-12. ISSN 1881-3054
Subramonian, Sivarao and Kasim, Mohd Shahir and Md Ali, Mohd Amran and Raja Abdullah, Raja Izamshah and Anand, T Joseph Sahaya (2015) Micro-Drilling Of Silicon Wafer By Industrial CO2 Laser. International Journal of Mechanical and Materials Engineering , 10 (2). pp. 1-6. ISSN -
Thangaraj, Joseph Sahaya Anand and Mohd Abid, Mohd Asyadi 'Azam and Subramonian, Sivarao and Buang, Zolkepli and K.M.Rajan, Rajes and Mat Yusoff, Nurul Hazliza and Abdul Aziz, Mohd Zaidan and Chua, Kok Yau (2015) HRTEM analysis of magnetron sputtered Ni4Al thin films. Applied Mechanics and Materials, 761. pp. 504-509. ISSN 1660-9336
Subramonian, Sivarao and Raguvaran, Jayahkudy and Md Ali, Mohd Amran and T., Joseph Sahaya Anand and Qumrul, Ahsan and Raja, Izamshah (2015) Way forward to halt pressure loss in automotive tyres. Applied Mechanics and Materials, 761. pp. 510-514. ISSN 1660-9336
Thangaraj, Joseph Sahaya Anand and Mohd Abid, Mohd Asyadi 'Azam and Subramonian, Sivarao and Buang, Zolkepli and K.M.Rajan, Rajes and Mat Yusoff, Nurul Hazliza and Abdul Aziz, Mohd Zaidan and Chua, Kok Yau (2015) Hrtem Studies Of Magnetron Sputtered Ni4al Thin Films. Applied Mechanics and Materials, 761 (-). pp. 504-509. ISSN -
Omar, Rostam and Dimin @ Mohd Amin, Mohd Fairuz and Subramonian, Sivarao and Mohamad Yatim, Norazlina and Shaaban, Azizah and Luqman, H. H. and Lau, Kok Keong and Said, Md Radzai and Mohamad, Norhidayah (2015) Assessing the significance of rate and time pulse spraying in top spray granulation of urea fertilizer using Taguchi method. Applied Mechanics and Materials, 761. pp. 308-312.
Md Ali, Mohd Amran and M., Faizal and Kasim, Mohd Shahir and Raja Abdullah, Raja Izamshah and Subramonian, Sivarao (2015) Product And Tooling Design Of Slanted Glass Injection Mould For Visualization Of Flow Molten Plastic. Jurnal Teknologi, 77 (21). pp. 9-18. ISSN 0127-9696
Dhar Malingam, Sivakumar and Che Mahzan, Muhammad ‘Ammar and Said, Md Radzai and Rivai, Ahmad and Nordin, Mohd Nur Azmi and Selamat, Mohd Zulkefli and Subramonian, Sivarao (2015) V-bend die forming performance of oil palm fiber composite. Applied Mechanics and Materials, 699. pp. 59-63. ISSN 1660-9336
Subramonian, Sivarao and Dimin @ Mohd Amin, Mohd Fairuz and Faris N. M. F. and Arep @ Ariff, Hambali and Dhar Malingam, Sivakumar and Salit, Mohd Sapuan (2014) Analytical hierarchy process for design selection of micro hot-marking tool. Applied Mechanics and Materials, 699. pp. 897-902. ISSN 1660-9336
Sivakumar, Dhar Malingam and Radzai, Said and Rivai, Ahmad and Ahadlin, Mohd Daud and Subramonian, Sivarao (2014) Effect of Reprocessing Palm Fiber Composite on the Mechanical Properties. Applied Mechanics and Materials. pp. 146-150. ISSN 16609336
Subramonian, Sivarao and Abdul Rahim, Samsudin and Tan, C. F. and Merry, Nona (2014) AHP based decision-making in concept selection of keyless grill locking system. International Journal of Mechanical & Mechatronics Engineering, 14 (5). pp. 72-79. ISSN 2077-124X (online) 2227-2771 (Print)
Subramonian, Sivarao and Mallisi, R and Teng, L S (2014) Enhanced Tensile properties of Stone wool fiber-reinforced high density polyethylene (HDPE) Composites. Materials Testing, 56. pp. 150-154. ISSN ISSN 0025-5300
Sivakumar, Dhar Malingam and Subramonian, Sivarao and Mohd Zulkefli, Selamat and Radzai, Said (2014) Effects of Process Parameters during Forming of Glass Reinforced-pp based Sandwich Structure. Advances in Environmental Biology, 8 (8). pp. 3143-3150. ISSN 1995-0756
Sivakumar, Dhar Malingam and Subramonian, Sivarao and Selamat, Mohd Zulkefli and Radzai, Said (2014) A Study on the Mechanical and Forming Performance of Oil Palm Fiber Reinforced Polypropylene Composite. American-Eurasian Journal of Sustainable Agriculture, 8 (4). pp. 141-147. ISSN 1995-0748
Md Ali, Mohd Amran and Salmah, Siti and Zaki, Mohd and RAJA ABDULLAH, RAJA IZAMSHAH and Abu Bakar, Mohd Hadzley and Subramonian, Sivarao and Kasim, Mohd Shahir and Sulaiman, Mohd Amri (2014) The Effect of Pressure on Warpage of Dumbbell Plastic Part in Injection Moulding Machine. Advanced Materials Research, 903. pp. 61-66. ISSN 1662-8985
Subramonian, Sivarao and Abdul Rahim, Samsudin (2014) Comparison between Taguchi Method and Response Surface Methodology (RSM) in modelling CO2 laser machining. Jordan Journal of Mechanical and Industrial Engineering, 8 (1). pp. 35-42. ISSN 1995-6665
Mohd, Hadzley and Nurul, Fatin and Raja, Izamshah and Hussein, Nur Izan Syahriah and Siti, Sarah and Subramonian, Sivarao (2014) Surface Integrity of a High Speed Milling FC300 Gray Cast Iron. Applied Mechanics and Materials. pp. 642-646. ISSN 1660-9336
Raja Abdullah, Raja Izamshah and Hassan, Zulhairy and Kasim, Mohd Shahir and Abu Bakar, Mohd Hadzley and Md Ali, Mohd Amran and Sulaiman, Mohd Amri and Subramonian, Sivarao (2014) Cutter Path Strategies For Shoulder Milling Of Thin Deflecting Walls. Advanced Materials Research, 903 (-). pp. 175-180. ISSN 1662-8985
O, Rostam and Subramonian, Sivarao and SAID, MD RADZAI (2014) Temperature effects on urea granules process to produce paddy fertilizer using top spray fluidized bed granulator. International Journal of Enhanced Research in Science Technology & Engineering, 3 (2). pp. 232-236. ISSN 2319-7463
Subramonian, Sivarao and Mohamad, Radzai Said and Azizah, Shaaban and Mohd Fairuz, Dimin (2014) Top spray fluidized bed granulated paddy urea fertilizer. Applied Mechanics and Materials, 606. pp. 137-140. ISSN 1662-7482
Subramonian, Sivarao and Omar, Rostam and Mohd Zani, Mohd Hafiz and Shaaban, Azizah and Dimin @ Mohd Amin, Mohd Fairuz and Said, Md Radzai and Hassan, Luqman Hakim (2014) Top spray fluidized bed granulated paddy urea fertilizer. Applied Mechanics and Materials, 606. pp. 137-140. ISSN 1660-9336
Md Ali, Mohd Amran and Mohd Sani, Siti Salmah and Mohd, Zaki and RAJA ABDULLAH, RAJA IZAMSHAH and Abu Bakar, Mohd Hadzley and Subramonian, Sivarao and Kasim, Mohd Shahir and Sulaiman, Mohd Amri (2014) The effect of pressure on warpage of dumbbell plastic part in injection moulding machine. Applied Mechanics and Materials, 529. pp. 61-66. ISSN 1662-7482.
Subramonian, Sivarao and Robert, Milkey and Samsudin, Abdul Rahim (2013) Taguchi modeling and optimization of laser processing in machining of substantial industrial PVC foam. International Journal of Applied Engineering Research, 8 (12). pp. 1415-1426. ISSN 0973-4562
Anuar , Mohamed Kassim and Subramonian, Sivarao and Jaafar, Hazriq Izzuan (2013) Brake Motion Control for Quadruped Hopping Robot by Using Reference Height Control System. International Review of Mechanical Engineering, 7 (6). pp. 784-790. ISSN 1970 - 8734
Tan, Chee Fai and Alkahari, Mohd Rizal and Said, Md Radzai and Dhar Malingam, Sivakumar and Liew, S. M. and Chen, Wei and Rauterberg, G. W. Matthias and Sarban Singh, Ranjit Singh and Subramonian, Sivarao (2013) Fire fighting mobile robot: state of the art and recent development. Australian Journal of Basic and Applied Sciences, 7 (10). pp. 220-230. ISSN 1991-8178
RAJA ABDULLAH, RAJA IZAMSHAH and YAAKOB, MOHD YUHAZRI and Abu Bakar, Mohd Hadzley and Md Ali, Mohd Amran and Subramonian, Sivarao (2013) Effects of End Mill Helix Angle on Accuracy for Machining Thin-Rib Aerospace Component. Applied Mechanics and Materials , 315 (2013). pp. 773-777. ISSN 1662-7482
Wan Mahmood, Wan Hasrulnizzam and Ebrahim, Zuhriah and Saptari, Adi and Mohamed Sultan, Al Amin and Abu Bakar, Mohd Hadzley and Subramonian, Sivarao and Ab Rahman, Mohd Nizam and Md Deros, Baba and Jusoff, Kamaruzaman and Jano, Zanariah (2013) Manufacturing performance in green supply chain management. World Applied Sciences Journal 21(Special Issue of Engineering and Technology). pp. 76-84. ISSN 1818-4952
Suresh, Kumar and Subramonian, Sivarao and Cheong MT and Mohd Azmeer and Harun, Fuaida (2010) Solving eventual bonding quality to enhance adhesion for QFN packages. 34th International Electronic Manufacturing Technology Conference, 2010. pp. 1-6. ISSN 1089-8190
Subramonian, Sivarao and Ahmad, Kamely and Md Palil, Md Dan (2009) Fuzzy expert system modeling of laser processing. Journal of Advanced Manufacturing Technology, 3 (1). pp. 35-43. ISSN 1985-3157
Chin, Chee Wen and Lee, Tian Soon and Subramonian, Sivarao (2004) Comparative Analysis & Modeling Of Surface Roughness In Drilling. International Journal of Applied Mechanics and Engineering, 9. pp. 305-311. ISSN 1425-1655
Chin, Chee Wen and Lee, Tian Soon and Subramonian, Sivarao (2004) Comparative Performance Analysis & Modeling Of Tool Wear In Drilling. International Journal of Applied Mechanics and Engineering, 9. pp. 33-38. ISSN 1425-1655
Subramonian, Sivarao and Lee, Tian Soon and Chin, Chee Wen (2004) Performance Analysis And Postulation Modeling Of Tool Wear In Drilling. American Journal of Science and Engineering, 3 (1). pp. 75-82. ISSN 1608-3679
Conference or Workshop Item
Farhana, Kaniz and Kadirgama, Kumaran and Subramonian, Sivarao and Ramasamy, Devarajan and Samykano, Mahendran and Mahmude, Abu Shadate Faisal (2023) Applications of graphene nanomaterials in energy storage—a state-of-art short review. In: 6th International Conference in Mechanical Engineering Research, ICMER 2021, 26 October 2021 through 27 October 2021, Virtual, Online.
David, Thevaneyan Krishta and Subramonian, Sivarao and Ramesh, S. (2023) Engineering research the perspective towards a sound conduct. In: 8th Brunei International Conference on Engineering and Technology 2021, BICET 2021, 8 November 2021 through 10 November 2021, Bandar Seri Begawan.
Subramonian, Sivarao and Prasath, K.P. and Ramesh, S. and Kadirgama, Kumaran and Salleh, Mohd Shukor and Ali, Mohd Amran and Maidin, Shajahan and David, Thevaneyan Krishta (2023) Rooted guardrail post design - an improvement towards reducing run-off-road catastrophic accidents. In: 8th Brunei International Conference on Engineering and Technology 2021, BICET 2021, 8 November 2021 through 10 November 2021, Bandar Seri Begawan, Brunei Darussalam.
Farhana, Kaniz and Kadirgama, Kumaran and Mohamed, Danial and Faisal Mahamude, Abu Shadate and Subramonian, Sivarao and Ramasamy, Devarajan and Samykano, Mahendran (2023) An experimental evaluation of specific heat of mono and hybrid nanofluids. In: 6th International Conference in Mechanical Engineering Research, ICMER 2021, 26 October 2021 through 27 October 2021, Virtual, Online.
Ng, X. H. and Bakar, R.A. and Kadirgama, Kumaran and Subramonian, Sivarao and Ramasamy, Devarajan and Samykano, Mahendran (2023) The performance of beta type stirling engine using different fuel. In: 6th International Conference in Mechanical Engineering Research, ICMER 2021, 26 October 2021 through 27 October 2021, Virtual, Online.
Md Ali, Mohd Amran and Raja Abdullah, Raja Izamshah and Hussein, Nur Izan Syahriah and Kasim, Mohd Shahir and Sulaiman, Mohd Amri and Salleh, Mohd Rizal and Mohamad, Effendi and Subramonian, Sivarao and Liew, Pay Jun and Abdullah, Zulkeflee (2014) Performance of wire-EDM parameters on machining characteristics of titanium alloy (Ti6Al4V) using Taguchi method. In: Malaysia University Conference Engineering Technology 2015, 10-11 November 2014, Melaka.
Book
Abd Rahman, Ammar and Subramonian, Sivarao and Minhat, Mohamad and Abd. Rahman, Md. Nizam and Salleh, Mohd Rizal (2013) Manufacturing Process Volume 1. Penerbit Universiti UTeM.
Patent
Raja Izamshah Raja Abdullah (2014) A plastic wall tile and method of manufacturing thereof. PI 2014703490.
Technical Report
Dhar Malingam, Sivakumar and Subramonian, Sivarao and Selamat, Mohd Zulkefli and Sheikh Md Fadzullah, Siti Hajar and Ab Ghani, Ahmad Fuad and Zulkafli, Norizzati (2019) Formulation of physio-mechanical properties towards enhancing hybrid banana kenaf reinforced bio-composites. [Technical Report] (Submitted)