Items where Author is "Subramonian, Sivarao "
 | Up a level |
Article
Salleh, Mohd Shukor and Wakhi Anuar, Nur Farah Bazilah and Yahaya, Saifudin Hafiz and Omar, Mohd Zaidi and Ali, Mohd Azamuddin and Subramonian, Sivarao (2022) Characteristics of A1Si7Mg0.3/X-GNPs composites manufactured via stir casting method. Journal Of Advanced Manufacturing Technology (JAMT), 16 (2). pp. 29-40. ISSN 1985-3157
Yahaya, Saifudin Hafiz and Subramonian, Sivarao and Salleh, Mohd Shukor and Satish, Pujari and Kadirgama, Kumaran (2021) Importance Of Knowledge-Attitude-Practice To Enhance University Technology Transfer. Journal of Advanced Manufacturing Technology, 15 (2). pp. 71-82. ISSN 1985-3157
Subramonian, Sivarao and Abdul Khalim, Abdul Zuhair and Salleh, Mohd Shukor and Md Ali, Mohd Amran and Kadirgama, Kumaran and U.K. Dubey and Pujari, Satish and Dhar Malingam, Sivakumar (2021) Artificial neural network predictive modelling of laser micro-grooving for commercial pure titanium (CP Ti) grade 2. Journal of Mechanical Engineering, 18 (2). pp. 217-234. ISSN 1823-5514
Md Ali, Mohd Amran and Mohd Ali, Noorfa Idayu and Abdullah, Zulkeflee and Subramonian, Sivarao and Abdul Aziz, Mohd Sanusi and Wan Muhammad, Wan Nur Azrina and Abu Bakar, Mohd Hadzley and Wakhi Anuar, Nur Farah Bazilah (2021) Fill Time Optimization Analysis In Flow Simulation Of Injection Molding Using Response Surface Method. Malaysian Journal on Composites Science and Manufacturing, 4 (1). pp. 28-39. ISSN 2716-6945
Dhar Malingam, Sivakumar and Ng, Lin Feng and Lee, Chun Khoon and Sheikh Md Fadzullah, Siti Hajar and Mustafa, Zaleha and Subramonian, Sivarao (2020) The influences of fibre parameters on the tensile and flexural response of lightweight thermoplastic kenaf fibre reinforced metal composites. Journal of Natural Fibers, 17 (7). pp. 966-978. ISSN 1544-0478
ANUAR BIN MOHAMED KASSIM, ANUAR BIN MOHAMED KASSIM and Mohamad Termezai, Mohd Faiz Najmuddin and Awangku Jaya, Awangku Khairurahman and Azahar, Arman Hadi and Subramonian, Sivarao and Jafar, Fairul Azni and Jaafar, Hazriq Izzuan and Mohd Aras, Mohd Shahrieel (2020) Design And Development Of Autonomous Pesticide Sprayer Robot For Fertigation Farm. International Journal of Advanced Computer Science and Applications, 11 (2). pp. 545-551. ISSN 2158-107X
Salleh, Mohd Shukor and Abd Rahman, Ammar and Othman, Intan Sharhida and Subramonian, Sivarao and Yahaya, Saifudin Hafiz and Siswanto, Nurhadi (2019) Investigation Of Wear And Corrosion Characteristics Of Short Heat Treated Thixoformed Aluminium Alloy. Journal of Advanced Manufacturing Technology, 13 (3). pp. 101-113. ISSN 1985-3157
Dhar Malingam, Sivakumar and Subramaniam, Kathiravan and Ng, Lin Feng and Sheikh Md Fadzullah, Siti Hajar and Subramonian, Sivarao (2019) Mechanical properties of plain woven kenaf/glass fiber reinforced polypropylene hybrid composites. Materialpruefung/Materials Testing, 61 (11). pp. 1095-1100. ISSN 0025-5300
Mohamed Kassim, Anuar and Awangku Jaya, Awangku Khairul Ridzwan and Azahar, Arman Hadi and Jaafar, Hazriq Izzuan and Subramonian, Sivarao and Jafar, Fairul Azni and Mohd Aras, Mohd Shahrieel (2019) Performance Analysis Of Acceleration Sensor For Movement Detection In Vehicle Security System. International Journal of Advanced Computer Science and Applications, 10 (10). pp. 395-401. ISSN 2158-107X
Subramonian, Sivarao and Jayahkundy, Raguvaran and Ali, Aidy and Abdullah, Mohamad Faizal and Dhar Malingam, Sivakumar and Md Ali, Mohd Amran and Arep @ Ariff, Hambali and Salleh, Mohd Shukor and Vates, Umesh Kumar (2019) Investigation of tyre pressure drop phenomenon using specially designed real-time data mining and storage system. International Journal of Recent Technology and Engineering, 7 (5S4). pp. 533-537. ISSN 2277-3878
Salleh, Mohd Shukor and Mohamad Ishak, Nurul Naili and Yahaya, Saifudin Hafiz and Subramonian, Sivarao and Abdullah, A. (2018) Effect Of Equal Channel Angular Pressing On The Microstructure And Mechanical Properties Of A356 Alloy. Journal Of Advanced Manufacturing Technology, 12. pp. 23-39. ISSN 1985-3157
Dhar Malingam, Sivakumar and Subramaniam, Kathiravan and Ng, Lin Feng and Ali, Mohd Basri and Selamat, Mohd Zulkefli and Bapokutty, Omar and Subramonian, Sivarao (2018) Experimental investigation on Charpy impact response of kenaf bast fibre reinforced metal laminate system. ARPN Journal of Engineering and Applied Sciences, 13 (3). pp. 822-827. ISSN 1819-6608
Dhar Malingam, Sivakumar and Mohd Amman, Rosmia and Samekto, Haryanti and Mohd Ab Halim, Mohd Firdaus and Abu Shah, Ismail and Sulaiman, Saiful Naim and Subramonian, Sivarao (2018) Influences of draw forming process on the crash analysis of a circular cup. Journal of Advanced Manufacturing Technology (JAMT), 12 (1(2)). pp. 547-559. ISSN 1985-3157
Dhar Malingam, Sivakumar and Ng, Lin Feng and Jenal, Ruztamreen and Mustafa, Zaleha and Subramonian, Sivarao (2018) A review of the tensile and fatigue responses of cellulosic fibre-reinforced polymer composites. Mechanics Of Advanced Materials and Structures, 27 (8). pp. 1-16. ISSN 1537-6494
Ng, Lin Feng and Dhar Malingam, Sivakumar and Zakaria, Kamarul Ariffin and Bapokutty, Omar and Subramonian, Sivarao (2017) Influence of kenaf fibre orientation effect on the mechanical properties of hybrid structure of fibre metal laminate. Pertanika Journal of Science & Technology, 25 (S5). pp. 1-8. ISSN 0128-7680
Md Ali, Mohd Amran and Mohd Ali, Noorfa Idayu and Abdullah, Zulkeflee and Abu Bakar, Mohd Hadzley and Subramonian, Sivarao and Abdul Aziz, Mohd Sanusi and Abdullah, Abu (2017) Interchangeable Core And Cavity Plates For Two-Plate Family Injection Mould. Journal Of Mechanical Engineering And Sciences (JMES), 11 (3). pp. 2815-2824. ISSN 2289-4659
Safian, Mohd Azizul Hikmi and Salleh, Mohd Shukor and Subramonian, Sivarao and Hussein, Nur Izan Syahriah and Sulaiman, Mohd Amri and Yahaya, Saifudin Hafiz (2017) Production Of LM4 Feedstock For Thixoforming By Using Cooling Slope Casting. Journal Of Advanced Manufacturing Technology (JAMT) , 11 (1). pp. 77-90. ISSN 1985-3157
Dhar Malingam, Sivakumar and Pilvamangalam, Nisallini and Bapokutty, Omar and Selamat, Mohd Zulkefli and Subramonian, Sivarao (2017) Quasi-static indentation behaviour of kenaf bast fibre reinforced metal laminate system. Defence S &T Technical Bulletin, 10 (3). pp. 258-271. ISSN 1985-6571 (Submitted)
Ali, Aidy and Subramonian, Sivarao and Md Ali, Mohd Amran and Dhar Malingam, Sivakumar and Salleh, Mohd Shukor and Raja Abdullah, Raja Izamshah (2016) Performance evaluation of reworked weld joints. International Journal of Engineering and Technologies, 9. pp. 5-12. ISSN 2297-623X
Ali, Aidy and Subramonian, Sivarao and Amran, Mohammad and Dhar Malingam, Sivakumar and Salleh, Mohd Shukor and Raja Abdullah, Raja Izamshah (2016) Effect of fiber loading on the mechanical properties of bagasse fiber–reinforced polypropylene composites. Advances In Mechanical Engineering, 8 (8). pp. 1-5. ISSN 1687-8132
Ali, Aidy and Subramonian, Sivarao and Amran, Mohammad and Dhar Malingam, Sivakumar and Salleh, Mohd Shukor and Raja Abdullah, Raja Izamshah (2016) Effect of fiber loading on the mechanical properties of bagasse fiber–reinforced polypropylene composites. Advances in Mechanical Engineering, 8 (8). pp. 1-5. ISSN 1687-8132
Dhar Malingam, Sivakumar and Subramaniam, Kathiravan and Selamat, Mohd Zulkefli and Said, Md Radzai and Subramonian, Sivarao (2016) A study on impact behaviour of a novel oil palm fibre reinforced metal laminate system. ARPN Journal Of Engineering And Applied Sciences, 11 (4). pp. 2483-2488. ISSN 1819-6608
Dhar Malingam, Sivakumar and Subramaniam, Kathiravan and Selamat, Mohd Zulkefli and Said, Md Radzai and Subramonian, Sivarao (2016) A study on impact behaviour of a novel oil palm fibre reinforced metal laminate system. ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2483-2488. ISSN 1819-6608
Anuar , Mohamed Kassim and Takashi , Yasuno and Hiroshi, Suzuki and Mohd Aras, Mohd Shahrieel and Jaafar, Hazriq Izzuan and Jafar, Fairul Azni and Subramonian, Sivarao (2016) Conceptual Design And Implementation Of Electronic Spectacle Based Obstacle Detection For Visually Impaired Persons. JOURNAL OF ADVANCED MECHANICAL DESIGN, SYSTEMS, AND MANUFACTURING, 10 (7). pp. 1-12. ISSN 1881-3054
Subramonian, Sivarao and Kasim, Mohd Shahir and Md Ali, Mohd Amran and Raja Abdullah, Raja Izamshah and Anand, T Joseph Sahaya (2015) Micro-Drilling Of Silicon Wafer By Industrial CO2 Laser. International Journal of Mechanical and Materials Engineering , 10 (2). pp. 1-6. ISSN -
Thangaraj, Joseph Sahaya Anand and Mohd Abid, Mohd Asyadi 'Azam and Subramonian, Sivarao and Buang, Zolkepli and K.M.Rajan, Rajes and Mat Yusoff, Nurul Hazliza and Abdul Aziz, Mohd Zaidan and Chua, Kok Yau (2015) HRTEM analysis of magnetron sputtered Ni4Al thin films. Applied Mechanics and Materials, 761. pp. 504-509. ISSN 1660-9336
Thangaraj, Joseph Sahaya Anand and Mohd Abid, Mohd Asyadi 'Azam and Subramonian, Sivarao and Buang, Zolkepli and K.M.Rajan, Rajes and Mat Yusoff, Nurul Hazliza and Abdul Aziz, Mohd Zaidan and Chua, Kok Yau (2015) Hrtem Studies Of Magnetron Sputtered Ni4al Thin Films. Applied Mechanics and Materials, 761 (-). pp. 504-509. ISSN -
Omar, Rostam and Dimin @ Mohd Amin, Mohd Fairuz and Subramonian, Sivarao and Mohamad Yatim, Norazlina and Shaaban, Azizah and Luqman, H. H. and Lau, Kok Keong and Said, Md Radzai and Mohamad, Norhidayah (2015) Assessing the significance of rate and time pulse spraying in top spray granulation of urea fertilizer using Taguchi method. Applied Mechanics and Materials, 761. pp. 308-312.
Md Ali, Mohd Amran and M., Faizal and Kasim, Mohd Shahir and Raja Abdullah, Raja Izamshah and Subramonian, Sivarao (2015) Product And Tooling Design Of Slanted Glass Injection Mould For Visualization Of Flow Molten Plastic. Jurnal Teknologi, 77 (21). pp. 9-18. ISSN 0127-9696
Dhar Malingam, Sivakumar and Che Mahzan, Muhammad ‘Ammar and Said, Md Radzai and Rivai, Ahmad and Nordin, Mohd Nur Azmi and Selamat, Mohd Zulkefli and Subramonian, Sivarao (2015) V-bend die forming performance of oil palm fiber composite. Applied Mechanics and Materials, 699. pp. 59-63. ISSN 1660-9336
Subramonian, Sivarao and Dimin @ Mohd Amin, Mohd Fairuz and Faris N. M. F. and Arep @ Ariff, Hambali and Dhar Malingam, Sivakumar and Salit, Mohd Sapuan (2014) Analytical hierarchy process for design selection of micro hot-marking tool. Applied Mechanics and Materials, 699. pp. 897-902. ISSN 1660-9336
Subramonian, Sivarao and Abdul Rahim, Samsudin and Tan, C. F. and Merry, Nona (2014) AHP based decision-making in concept selection of keyless grill locking system. International Journal of Mechanical & Mechatronics Engineering, 14 (5). pp. 72-79. ISSN 2077-124X (online) 2227-2771 (Print)
Subramonian, Sivarao and Abdul Rahim, Samsudin (2014) Comparison between Taguchi Method and Response Surface Methodology (RSM) in modelling CO2 laser machining. Jordan Journal of Mechanical and Industrial Engineering, 8 (1). pp. 35-42. ISSN 1995-6665
Raja Abdullah, Raja Izamshah and Hassan, Zulhairy and Kasim, Mohd Shahir and Abu Bakar, Mohd Hadzley and Md Ali, Mohd Amran and Sulaiman, Mohd Amri and Subramonian, Sivarao (2014) Cutter Path Strategies For Shoulder Milling Of Thin Deflecting Walls. Advanced Materials Research, 903 (-). pp. 175-180. ISSN 1662-8985
Subramonian, Sivarao and Mohamad, Radzai Said and Azizah, Shaaban and Mohd Fairuz, Dimin (2014) Top spray fluidized bed granulated paddy urea fertilizer. Applied Mechanics and Materials, 606. pp. 137-140. ISSN 1662-7482
Subramonian, Sivarao and Omar, Rostam and Mohd Zani, Mohd Hafiz and Shaaban, Azizah and Dimin @ Mohd Amin, Mohd Fairuz and Said, Md Radzai and Hassan, Luqman Hakim (2014) Top spray fluidized bed granulated paddy urea fertilizer. Applied Mechanics and Materials, 606. pp. 137-140. ISSN 1660-9336
Anuar , Mohamed Kassim and Subramonian, Sivarao and Jaafar, Hazriq Izzuan (2013) Brake Motion Control for Quadruped Hopping Robot by Using Reference Height Control System. International Review of Mechanical Engineering, 7 (6). pp. 784-790. ISSN 1970 - 8734
Tan, Chee Fai and Alkahari, Mohd Rizal and Said, Md Radzai and Dhar Malingam, Sivakumar and Liew, S. M. and Chen, Wei and Rauterberg, G. W. Matthias and Sarban Singh, Ranjit Singh and Subramonian, Sivarao (2013) Fire fighting mobile robot: state of the art and recent development. Australian Journal of Basic and Applied Sciences, 7 (10). pp. 220-230. ISSN 1991-8178
Wan Mahmood, Wan Hasrulnizzam and Ebrahim, Zuhriah and Saptari, Adi and Mohamed Sultan, Al Amin and Abu Bakar, Mohd Hadzley and Subramonian, Sivarao and Ab Rahman, Mohd Nizam and Md Deros, Baba and Jusoff, Kamaruzaman and Jano, Zanariah (2013) Manufacturing performance in green supply chain management. World Applied Sciences Journal 21(Special Issue of Engineering and Technology). pp. 76-84. ISSN 1818-4952
Suresh, Kumar and Subramonian, Sivarao and Cheong MT and Mohd Azmeer and Harun, Fuaida (2010) Solving eventual bonding quality to enhance adhesion for QFN packages. 34th International Electronic Manufacturing Technology Conference, 2010. pp. 1-6. ISSN 1089-8190
Subramonian, Sivarao and Ahmad, Kamely and Md Palil, Md Dan (2009) Fuzzy expert system modeling of laser processing. Journal of Advanced Manufacturing Technology, 3 (1). pp. 35-43. ISSN 1985-3157
Chin, Chee Wen and Lee, Tian Soon and Subramonian, Sivarao (2004) Comparative Analysis & Modeling Of Surface Roughness In Drilling. International Journal of Applied Mechanics and Engineering, 9. pp. 305-311. ISSN 1425-1655
Chin, Chee Wen and Lee, Tian Soon and Subramonian, Sivarao (2004) Comparative Performance Analysis & Modeling Of Tool Wear In Drilling. International Journal of Applied Mechanics and Engineering, 9. pp. 33-38. ISSN 1425-1655
Subramonian, Sivarao and Lee, Tian Soon and Chin, Chee Wen (2004) Performance Analysis And Postulation Modeling Of Tool Wear In Drilling. American Journal of Science and Engineering, 3 (1). pp. 75-82. ISSN 1608-3679
Conference or Workshop Item
Md Ali, Mohd Amran and Raja Abdullah, Raja Izamshah and Hussein, Nur Izan Syahriah and Kasim, Mohd Shahir and Sulaiman, Mohd Amri and Salleh, Mohd Rizal and Mohamad, Effendi and Subramonian, Sivarao and Liew, Pay Jun and Abdullah, Zulkeflee (2014) Performance of wire-EDM parameters on machining characteristics of titanium alloy (Ti6Al4V) using Taguchi method. In: Malaysia University Conference Engineering Technology 2015, 10-11 November 2014, Melaka.
Patent
Raja Izamshah Raja Abdullah (2014) A plastic wall tile and method of manufacturing thereof. PI 2014703490.
Technical Report
Dhar Malingam, Sivakumar and Subramonian, Sivarao and Selamat, Mohd Zulkefli and Sheikh Md Fadzullah, Siti Hajar and Ab Ghani, Ahmad Fuad and Zulkafli, Norizzati (2019) Formulation of physio-mechanical properties towards enhancing hybrid banana kenaf reinforced bio-composites. [Technical Report] (Submitted)