Items where Division is "Faculty of Mechanical Engineering" and Year is 2019

A

Abd Halim, Zakiah and Jamaludin, Nordin and Putra, Azma (2019) The Effect Of Linkages In The Hierarchical Clustering Of Auto-Regressive Algorithm For Defect Identification In Heat Exchanger Tubes. International Journal of Recent Technology and Engineering (IJRTE), 8 (4). pp. 5003-5009. ISSN 2277-3878

Abdollah, Mohd Fadzli and Mahmud, Dayang Nor Fatin and Masripan, Nor Azmmi and Tamaldin, Noreffendy and Amiruddin, Hilmi (2019) Influence Of Contact Pressure And Sliding Speed Dependence On The Tribological Characteristics Of An Activated Carbon Epoxy Composite Derived From Palm Kernel Under Dry Sliding Conditions. Friction, 7 (3). pp. 227-236. ISSN 2223-7690

Abdollah, Mohd Fadzli bin and Amiruddin, Hilmi and Norashid, Norjannahtul Ainah (2019) Comparative Study Of The Tribological Behaviour Of 3D-Printed And Moulded ABS Under Lubricated Condition. Materials Research Express, 6 (8). pp. 1-7. ISSN 2053-1591

Abdollah, Mohd Fadzli bin and Ibrahim, Maziah and Amiruddin, Hilmi (2019) Friction Reduction Of Palm Kernel Activated Carbon Polymer Composite By Lubricant Impregnation. Tribology Online, 14 (5). pp. 411-416. ISSN 1881-2198

Abdul Hamid, Nurfaizey and Mohd Daud, Mohd Ahadlin and Muhammad, Noryani and Mansor, Muhd Ridzuan and Che Long, Faizah and Tucker, Nick (2019) An Investigation Of Using Grey Scale Image Analysis For Predicting The Amount Of Deposited Electrospun Nanofibres. Journal of Mechanical Engineering and Sciences, 13 (1). pp. 4679-4692. ISSN 2289-4659

Abdullah, Amira Lateef and Misha, Suhaimi and Tamaldin, Noreffendy and Mohd Rosli, Mohd Afzanizam and Sachit, Fadhil Abdulameer (2019) Hybrid Photovoltaic Thermal PVT Solar Systems Simulation Via Simulink/MATLAB. CFD Letters, 11 (4). 64 - 78. ISSN 2180-1363

Abdullah, Amira Lateef and Misha, Suhaimi and Tamaldin, Noreffendy and Mohd Rosli, Mohd Afzanizam and Sachit, Fadhil Abdulameer (2019) A Review: Parameters Affecting The PVT Collector Performance On The Thermal, Electrical, And Overall Efficiency Of PVT System. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 60 (2). pp. 191-232. ISSN 2289-7879

Abdullah, Amira Lateef and Misha, Suhaimi and Tamaldin, Noreffendy and Mohd Rosli, Mohd Afzanizam and Sachit, Fadhil Abdulameer (2019) Technology Progress On Photovoltaic Thermal (PVT) Systems With Flat-Plate Water Collector Designs: A Review. Journal Of Advanced Research In Fluid Mechanics And Thermal Sciences, 59 (1). pp. 107-141. ISSN 2289-7879

Abdullah, Amira Lateef and Misha, Suhaimi and Tamaldin, Noreffendy and Mohd Rosli, Mohd Afzanizam and Sachit, Fadhil Abdulameer (2019) Thermal Efficiency And Heat Removal Factor For Hybrid Photovoltaic Thermal PVT System. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 58 (1). 51 - 61. ISSN 2289-7879

Azahari, Norzailan and Putra, Azma and Mat Dan, Reduan and Othman, Muhammad Nur (2019) Sound Insulation Performance Of Kenaf Fibre As A Noise Control Treatment In Car Using Statistical Energy Analysis. Defence S And T Technical Bulletin, 12 (1). 126 - 139. ISSN 1985-6571

C

Cheng, See Yuan and Hong, Mun Hoh and Lim, Kim Chuan (2019) Numerical Modelling Of Synthetic-Jet-Assisted Mixing. CFD Letters, 11 (4). pp. 16-31. ISSN 2180-1363

D

Dhar Malingam, Sivakumar and Ng, Lin Feng and Selamat, Mohd Zulkefli and Mustafa, Zaleha and Bapokutty, Omar (2019) A comparison study on the mechanical properties of composites based on kenaf and pineapple leaf fibres. Polymer Bulletin, 77 (3). pp. 1449-1463. ISSN 0170-0839

Dhar Malingam, Sivakumar and Ng, Lin Feng and Subramaniam, Kathiravan and Selamat, Mohd Zulkefli and Ali, Mohd Basri and Bapokutty, Omar (2019) The influence of fibre stacking configurations on the indentation behaviour of pineapple leaf / glass fibre reinforced hybrid composites. Defence S and T Technical Bulletin, 12 (1). pp. 113-123. ISSN 1985-6571

Dhar Malingam, Sivakumar and Subramaniam, Kathiravan and Ng, Lin Feng and Bapokutty, Omar (2019) The effects of stacking configuration on the response of tensile and quasi-static penetration to woven kenaf/glass hybrid composite metal laminate. Polymer Composites, 40 (2). pp. 568-577. ISSN 0272-8397

Dhar Malingam, Sivakumar and Subramaniam, Kathiravan and Ng, Lin Feng and Sheikh Md Fadzullah, Siti Hajar and Subramonian, Sivarao (2019) Mechanical properties of plain woven kenaf/glass fiber reinforced polypropylene hybrid composites. Materialpruefung/Materials Testing, 61 (11). pp. 1095-1100. ISSN 0025-5300

Dhar Malingam, Sivakumar and Zulkafli, Norizzati and Sheikh Md Fadzullah, Siti Hajar and Mustafa, Zaleha and Zakaria, Kamarul Ariffin and Subramonian, Sivarao (2019) Mechanical properties of cross-ply banana-glass fibre reinforced polypropylene composites. Defence S and T Technical Bulletin, 12 (1). pp. 124-135. ISSN 1985-6571

Dhar Malingam, Sivakumar and Zulkafli, Norizzati and Sheikh Md Fadzullah, Siti Hajar and Razali, Nadlene (2019) Quasi and dynamic impact performance of hybrid cross-ply banana/glass fibre reinforced polypropylene composites. Materials Research Express, 6 (12). pp. 1-9. ISSN 2053-1591

Dhar Malingam, Sivakumar and Zulkafli, Norizzati and Sheikh Md Fadzullah, Siti Hajar and Zakaria, Kamarul Ariffin and Mustafa, Zaleha and Subramonian, Sivarao (2019) Effect of water absorption on the mechanical properties of cross-ply hybrid pseudo- stem banana/glass fibre reinforced polypropylene composite. Materials Research Express, 6 (9). pp. 1-13. ISSN 2053-1591

I

Ifayefunmi, Olawale Friday and Ismail, Mohd Shahrom and Sheikh Md Fadzullah, Siti Hajar (2019) Buckling Of Imperfect Cylinder-Cone-Cylinder Transition Under Axial Compression. Thin-Walled Structures, 144. 01-11. ISSN 0263-8231

K

Katijan, Adnan and Kamardin, Azizul Hakim (2019) The Effect Of Compression Ratio By Different Piston Head Shape On The Performance Of Motorcycle Engine. International Journal of Automotive and Mechanical Engineering, 16 (3). pp. 6906-6917. ISSN 2180-1606

Khavanin, Ali and Taban, Ebrahim and Soleimanian, Ardalan and Ohadi, Abdolreza R. and Putra, Azma and Jafari, Ahmad Jonidi and Faridan, Mohammad (2019) Study On The Acoustic Characteristics Of Natural Date Palm Fibres: Experimental And Theoretical Approaches. Building and Environment, 161. pp. 1-11. ISSN 0360-1323

M

Masripan, Nor Azmmi and Omar, Ghazali and Salim, Mohd Azli and Mansor, Muhd Ridzuan and Md. Saad, Adzni and Abdul Hamid, Nurfaizey and Mohamad, Imran Syakir and Abdul Rashid, Zulhilmi and Al-Nasrawi, Hayder Saad Oleiwi (2019) Effect Of Load And Temperature On Friction Using Banana Peel Blended With Paraffin Oil Under High Loading Capacity. Journal of Mechanical Engineering and Technology, 11 (2). pp. 24-35. ISSN 2180-1053

Mat Dan, Reduan and Putra, Azma and Sudin, Mohd Nizam and Abdul Hamid, Abdul Hakim and Mazlan, Rozdman Khaidir (2019) Wear Behaviour Of A-C: H Helical Gear Through Particle Generation. Defence S and T Technical Bulletin, 12 (1). 161 - 175. ISSN 1985-6571

Mat Tahir, Noor Ayuma and Abdollah, Mohd Fadzli and Tamaldin, Noreffendy and Amiruddin, Hilmi and Mohamad Zin, Mohd Rody and Tokoroyama, Takayuki and Umehara, Noritsugu (2019) The Tribological Potential Of Graphene Growth From Solid Waste. Progress in Industrial Ecology, 13 (4). pp. 401-413. ISSN 1476-8917

Mat Tahir, Noor Ayuma and Abdollah, Mohd Fadzli bin and Tamaldin, Noreffendy and Amiruddin, Hilmi and Mohamad Zin, Mohd Rody (2019) Graphene Coatings Technology On Tribology Perspective. International Journal of Recent Technology and Engineering (IJRTE), 8 (1S5). pp. 33-37. ISSN 2277-3878

Md Alias, Muhammad Aizat and Abdollah, Mohd Fadzli bin and Amiruddin, Hilmi (2019) Lubricant And Tribological Properties Of Zinc Compound In Palm Oil. Industrial Lubrication and Tribology, 71 (10). pp. 1177-1185. ISSN 0036-8792

Mohammad, Muhammad Azrain and Mansor, Muhd Ridzuan and Omar, Ghazali and Sheikh Md Fadzullah, Siti Hajar and Dhar Malingam, Sivakumar and Nordin, Mohd Nur Azmi and Esa, Siti Rahmah (2019) Effect of high thermal stress on the organic light emitting diodes (OLEDs) performances. Synthetic Metals, 247. pp. 191-201. ISSN 0379-6779

Mohd Daud, Mohd Ahadlin and Md Zahir, Nur Aizatul ‘Ain and Dhar Malingam, Sivakumar and Mansor, Muhd Ridzuan and Ab Ghani, Ahmad Fuad (2019) Optimisation of hybrid composite reinforced carbon and glass using AHP method. Defence S and T Technical Bulletin, 12 (1). pp. 101-112. ISSN 1985-6571

Mohd Rosli, Mohd Afzanizam and Mohd Zaki, Danial Shafiq and Abdul Rahman, Fatiha and Sepeai, Suhaila and Abdul Hamid, Nurfaizey and Nawam, Muhammad Zaid (2019) F-Chart Method For Design Domestic Hot Water Heating System In Ayer Keroh Melaka. Journal Of Advanced Research In Fluid Mechanics And Thermal Sciences, 56 (1). pp. 59-67. ISSN 2289-7879

Mohd Sa'at, Fatimah Al-Zahrah and Shikh Anuar, Fadhilah and Mustaffa, Siti Hajar Adni (2019) Numerical And Experimental Investigations Of The Oscillatory Flow Inside Standing Wave Thermoacoustic System At Two Different Flow Frequencies. CFD Letters, 11 (8). pp. 1-15. ISSN 2180-1363

Mohd Saat, Fatimah Al Zahrah and Johari, Dahlia and Mat Tokit, Ernie (2019) DeltaE modelling and experimental study of a standing wave thermoacoustic test rig. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 60 (2). pp. 155-165. ISSN 2289-7879

Muhamad Muaz Nasaruddin, Muhamad Muaz Nasaruddin and Sheikh Md Fadzullah, Siti Hajar and Omar, Ghazali (2019) Preliminary investigation on multi-walled carbon nanotubes filled epoxy composite as electrically conductive adhesive. International Journal Of Recent Technology And Engineering (IJRTE), 8 (1S5). pp. 28-32. ISSN 2277-3878

Muhd Ridzuan Mansor, Muhd Ridzuan and Taufiq, M.J. and Mustafa, Zaleha and Jumaidin, Ridhwan and Mohammad Taha, Mastura and Firdaus, Firdaus, H. M.S. and Basori, Basori (2019) Thermal And Mechanical Behaviour Of Recycled Polypropylene/Polyethylene Blends Of Rejected-Unused Disposable Diapers. Journal of Advanced Manufacturing Technology (JAMT), 13 (3). pp. 13-23. ISSN 1985-3157

N

Ng, Lin Feng and Dhar Malingam, Sivakumar and Subramaniam, Kathiravan and Woo, Xiu Juan and Siva, Irulappasamy (2019) The effects of bonding temperature and surface roughness on the shear strength of bonded aluminium laminates using polypropylene based adhesive. Journal of Advanced Manufacturing Technology, 13 (2). pp. 113-127. ISSN 1985-3157

P

Putra, Azma and Mosa, Ali Ibrahim and Ramlan, Roszaidi and Prasetiyo, Iwan and Jameel, Esraa Al-Amer (2019) Theoretical model of absorption coefficient of an inhomogeneous MPP absorber with multi-cavity depths. Applied Acoustics, 146. 409 - 419. ISSN 0003-682X

R

Razak, Nurul Hanim and Hashim, Haslenda and Yunus, Nor Alafiza and Klemeš, Jiří Jaromír and Phoon, Li Yee (2019) Optimisation Of Ternary Green Diesel Blends For Diesel/Palm Methyl Ester/Alcohol Using Product Design Optimization. Chemical Engineering Transactions, 72. pp. 391-396. ISSN 2283-9216

S

Sapuan, S. M. and Mohammad Taha, Mastura and Muhammad, Noryani and Zuhri, Mohd Yusoff Moh and Zainudin, E. S. (2019) Material Selection Of A Natural Fibre Reinforced Polymer Composites Using An Analytical Approach. Journal of Renewable Materials, 7 (11). pp. 1165-1179. ISSN 2164-6341

Sheikh Md Fadzullah, Siti Hajar and Nasaruddin, Muhamad Muaz and Kamalrudin, Massila and Ramli, Mizah and Mohamad, Imran Syakir and Omar, Ghazali and Akop, Mohd Zaid (2019) The Effect Of Aspect Ratio On Multi-Walled Carbon Nanotubes Filled Epoxy Composite As Electrically Conductive Adhesive. Journal of Advanced Manufacturing Technology (JAMT), 13 (1). pp. 133-144. ISSN 1985-3157

Sukri, Mohamad Firdaus and Rachmad, Imbang Tritjahjono and Kasni, Sumeru and Andriyanto, Setyawan (2019) Evaluation Of Subcooling With Liquid-Suction Heat Exchanger On The Performance Of Air Conditioning System Using R22/R410A/R290/R32 As Refrigerants. Journal Of Advanced Research In Fluid Mechanics And Thermal Sciences, 55 (1). pp. 1-11. ISSN 2289-7879

Sumeru, Kasni and Sukri, Mohamad Firdaus and Falahuddin, Muhamad Anda and Setyawan, Andriyanto (2019) A review on sub-cooling in vapor compression refrigeration cycle for energy saving. Jurnal Teknologi, 81 (5). pp. 155-170. ISSN 2180–3722

Y

Yusmady, Mohamed Arifin and Shamsudin, Shamsul Anuar and Mokhtar, Muhammad Zhafri and Syahrial, Fadhli and Akop, Mohd Zaid and Herawan, Safarudin Gazali (2019) The Effect Of Diesel And Bio-Diesel Fuel Deposit Layers On Heat Transfer. Journal of Advanced Manufacturing Technology (JAMT), 13 (2). pp. 1-14. ISSN 1985-3157

Z

Zakaria, Muhammad Zulfattah and Jumaidin, Ridhwan and Norain, Idris and Zulkifli, N.W.M. and Masjuki, H.H. and Harith, M.H. and Syahir, A.Z. and Yusoff, M.N.A.M. and Alwi, Azham and Jamshaid, M. and Arslan, A. (2019) Effect Of Bio-Based Lubricant Towards Emissions And Engine Breakdown Due To Spark Plug Fouling In A Two-Stroke Engine. Journal of Cleaner Production, 221. pp. 215-223. ISSN 0959-6526